summaryrefslogtreecommitdiff
path: root/start/lspconfig-0.1.3/doc
diff options
context:
space:
mode:
Diffstat (limited to 'start/lspconfig-0.1.3/doc')
-rw-r--r--start/lspconfig-0.1.3/doc/lspconfig.txt636
-rw-r--r--start/lspconfig-0.1.3/doc/server_configurations.md6554
-rw-r--r--start/lspconfig-0.1.3/doc/server_configurations.txt6554
3 files changed, 0 insertions, 13744 deletions
diff --git a/start/lspconfig-0.1.3/doc/lspconfig.txt b/start/lspconfig-0.1.3/doc/lspconfig.txt
deleted file mode 100644
index d1d9103..0000000
--- a/start/lspconfig-0.1.3/doc/lspconfig.txt
+++ /dev/null
@@ -1,636 +0,0 @@
-*lspconfig.txt* For Nvim version 0.6.1+ Last change: 2021 Nov 7
-==============================================================================
-TABLE OF CONTENTS *lspconfig-toc*
-
-1. Introduction (|lspconfig|)
-2. LSP overview (|lspconfig-lsp|)
-3. Quickstart (|lspconfig-quickstart|)
-4. Setup {} (|lspconfig-setup|)
-5. Global defaults (|lspconfig-global-defaults|)
-6. Server configurations (|lspconfig-configurations|)
- 6a. Adding servers (|lspconfig-adding-servers|)
-7. Root directories (|lspconfig-root-detection|)
- 7a. Advanced detection (|lspconfig-root-advanced|)
- 7b. Single file support (|lspconfig-single-file-support|)
-8. Commands (|lspconfig-commands|)
-9. Keybindings (|lspconfig-keybindings|)
-10. Completion (|lspconfig-completion|)
-11. Debugging (|lspconfig-debugging|)
-12. Logging (|lspconfig-logging|)
-13. Scope (|lspconfig-scope|)
-
-==============================================================================
-INTRODUCTION *lspconfig*
-
-`lspconfig` is a collection of community contributed configurations for the
-built-in language server client in Neovim core. This plugin provides four
-primary functionalities:
-
- - default launch commands, initialization options, and settings for each
- server
- - a root directory resolver which attempts to detect the root of your project
- - an autocommand mapping that either launches a new language server or
- attempts to attach a language server to each opened buffer if it falls
- under a tracked project
- - utility commands such as LspInfo, LspStart, LspStop, and LspRestart for
- managing language server instances
-
-`lspconfig` is not required to use the built-in client, it is only one front-end
-interface for when a language server specific plugin is not available.
-
-See |lspconfig-server-configurations| by typing `K` over it for the complete
-list of language servers configurations.
-
-==============================================================================
-LSP OVERVIEW *lspconfig-lsp*
-
-Nvim supports the Language Server Protocol (LSP) via the built-in language
-server client. LSP facilitates many features, some of which include:
-
-- go-to-definition
-- find-references
-- hover
-- completion
-- rename
-- format
-- refactor
-
-These features are implemented in Neovim core, not `lspconfig`. See `:help lsp`
-for more details.
-
-NOTE: Feature availability depends on the implementation details of the
-server. A server may implement only a subset of these features. Always
-consult the server documentation before filing a bug report on a missing
-feature.
-
-==============================================================================
-QUICKSTART *lspconfig-quickstart*
-
-- ensure the server is installed and executable from the command line
-
-- enable the server in your Neovim configuration (Lua example):
->
- require'lspconfig'.clangd.setup{}
-<
-- create a new project, ensure that it contains a root marker which matches the
- server requirements specified in |lspconfig-server-configurations|.
-
-- open a file within that project, such as `main.c`.
-
-- If you need more information about a server configuration, read the corresponding
- entry in |lspconfig-server-configurations|.
-
-==============================================================================
-THE SETUP METAMETHOD *lspconfig-setup*
-
-`lspconfig` consists of a collection of language server configurations. Each
-configuration exposes a `setup {}` metamethod which makes it easy to directly
-use the default configuration or selectively override the defaults.
-`setup {}` is the primary interface by which users interact with `lspconfig`.
-
-Using the default configuration for a server is simple:
->
- require'lspconfig'.clangd.setup{}
-<
-The available server names are listed in |lspconfig-server-configurations| and
-match the server name in `config.SERVER_NAME` defined in each configuration's
-source file.
-
-The purpose of `setup{}` is to wrap the call to Nvim's built-in
-`vim.lsp.start_client()` with an autocommand that automatically launch a
-language server.
-
-This autocommand calls `start_client()` or `vim.lsp.buf_attach_client()`
-depending on whether the current file belongs to a project with a currently
-running client. See |lspconfig-root-detection| for more details.
-
-The `setup{}` function takes a table which contains a superset of the keys
-listed in `:help vim.lsp.start_client()` with the following unique entries:
-
-- {root_dir}
-
- `function(filename, bufnr)`
-
- Returns either a filepath (string) or nil. The language server will only
- start if the function returns a filepath.
-
- If a root directory (string) is returned which is unique from any
- previously returned root_dir, a new server will be spawned with that
- root directory. See |lspconfig-root-detection| for more details
-
-- {name}
-
- `string`
-
- Defaults to the server's name (`clangd`, `pyright`, etc.).
-
-- {filetypes}
-
- `list[string] | nil`
-
- Set of filetypes for which to attempt to resolve {root_dir}.
-
- May be empty, or server may specify a default value.
-
-- {autostart}
-
- `bool` (default: true)
-
- Controls if the `FileType` autocommand that launches a language server is
- created. If `false`, allows for deferring language servers until manually
- launched with `:LspStart` (|lspconfig-commands|).
-
-- {single_file_support}
-
- `bool` (default: nil)
-
- Determines if a server is started without a matching root directory.
- See |lspconfig-single-file-support|.
-
-- {on_new_config}
-
- `function(new_config, new_root_dir)`
-
- Function executed after a root directory is detected. This is used to
- modify the server configuration (including `cmd` itself). Most commonly,
- this is used to inject additional arguments into `cmd`.
-
- If overriding `on_new_config`, ensure that you read the
- `on_new_config` defined in the source file of the default configuration
- in `lspconfig`. The original `on_new_config` snippet for a given server
- should likely be included in your new override. Some configurations
- use `on_new_config` to dynamically set or modify `cmd`.
-
-Note: all entries passed to `setup {}` override the entry in the default
-configuration. There is no composition.
-
-All `config` elements described in `:help vim.lsp.start_client()` can
-additionally be overridden via the `setup {}` call. The most commonly
-passed overrides to `setup {}` are:
-
-- {capabilities} `table <string, string|table|bool|function>`
-
- a table which represents the neovim client capabilities. Useful for
- broadcasting to the server additional functionality (snippets, off-protocol
- features) provided by plugins.
-
-- {cmd} `list[string]`
-
- a list where each entry corresponds to the blankspace delimited part of
- the command that launches the server. The first entry is the binary used
- to run the language server. Additional entries are passed as arguments.
-
- The equivalent `cmd` for:
->
- foo --bar baz
-<
- is:
->
- {'foo', '--bar', 'baz}
-<
-- {handlers} `list[functions]`
-
- a list of handlers which override the function used to process a response
- from a given language server. Applied only to the server referenced by
- setup. See |lsp-handler|.
-
-- {init_options} `table <string, string|table|bool>`
-
- a table passed during the initialization notification after launching
- a language server. Equivalent to the `initializationOptions` field found
- in `InitializeParams` in the LSP specification.
-
- See upstream server documentation for available initialization
- options.
-
-- {on_attach} `function(client, bufnr)`
-
- Callback invoked by Nvim's built-in client when attaching a buffer to a
- language server. Often used to set Nvim (buffer or global) options or to
- override the Nvim client properties (`resolved_capabilities`) after a
- language server attaches. Most commonly used for settings buffer
- local keybindings. See |lspconfig-keybindings| for a usage example.
-
-- {settings} `table <string, string|table|bool>`
-
- The `settings` table is sent in `on_init` via a
- `workspace/didChangeConfiguration` notification from the Nvim client to
- the language server. These settings allow a user to change optional runtime
- settings of the language server.
-
- As an example, to set the following settings found in the pyright
- documentation:
-
- `pyright.disableLanguageServices`: `boolean`
- `pyright.disableOrganizeImports`: `boolean`
-
- Nested keys need to be translated into a nested table and passed to
- the settings field in `setup {}` as follows:
->
- require('lspconfig').pyright.setup{
- settings = {
- pyright = {
- disableLanguageServices = true,
- disableOrganizeImports = true,
- }
- }
- }
-<
-==============================================================================
-OVERRIDING GLOBAL DEFAULTS *lspconfig-global-defaults*
-
-The global defaults for all servers can be overridden by extending the
-`default_config` table.
-
->
- local lspconfig = require'lspconfig'
- lspconfig.util.default_config = vim.tbl_extend(
- "force",
- lspconfig.util.default_config,
- {
- autostart = false,
- handlers = {
- ["window/logMessage"] = function(err, method, params, client_id)
- if params and params.type <= vim.lsp.protocol.MessageType.Log then
- vim.lsp.handlers["window/logMessage"](err, method, params, client_id)
- end
- end;
- ["window/showMessage"] = function(err, method, params, client_id)
- if params and params.type <= vim.lsp.protocol.MessageType.Warning.Error then
- vim.lsp.handlers["window/showMessage"](err, method, params, client_id)
- end
- end;
- }
- }
- )
-<
-`setup {}` can additionally override these defaults in subsequent calls.
-
-==============================================================================
-SERVER CONFIGURATIONS *lspconfig-configurations*
-
-See |lspconfig-server-configurations| by typing `K` over it for the complete
-list of language servers configurations.
-
-While the `setup {}` function is the primary interface to `lspconfig`, for
-servers for which there is not a configuration, it is necessary to define a
-configuration directly. This can be useful if there is an outstanding PR that
-is in review, or when developing a language server that is unavailable
-publicly. This can be done through the `configs` module.
-
-The `configs` module is a singleton where configs are defined. The schema for
-validating using `vim.validate` is:
->
- configs.SERVER_NAME = {
- default_config = {'t'};
- on_new_config = {'f', true};
- on_attach = {'f', true};
- commands = {'t', true};
- docs = {'t', true};
- }
-<
-where the structure of the docs table is as follows:
->
- docs = {
- description = {'s', true};
- default_config = {'t', true};
- }
-<
-`commands` is a map of `name:definition` key:value pairs, where `definition`
-is a list whose first value is a function implementing the command, and the
-rest are either array values which will be formed into flags for the command,
-or special keys like `description`. Example:
->
- commands = {
- TexlabBuild = {
- function()
- buf_build(0)
- end;
- "-range";
- description = "Build the current buffer";
- };
- };
-<
-The `configs.__newindex` metamethod consumes the config definition and returns
-an object with a `setup()` method, to be invoked by users:
->
- require'lspconfig'.SERVER_NAME.setup{}
-
-After you set `configs.SERVER_NAME` you can add arbitrary language-specific
-functions to it if necessary.
-
-Example:
-
->
- configs.texlab.buf_build = buf_build
-<
-==============================================================================
-ADDING NEW SERVERS *lspconfig-adding-servers*
-
-The three steps for adding and enabling a new server configuration are:
-
-- load the `lspconfig` module (note that this is a stylistic choice)
->
- local lspconfig = require 'lspconfig'
-<
-- define the configuration
-
->
- local configs = require 'lspconfig.configs'
-
- -- Check if the config is already defined (useful when reloading this file)
- if not configs.foo_lsp then
- configs.foo_lsp = {
- default_config = {
- cmd = {'/home/neovim/lua-language-server/run.sh'};
- filetypes = {'lua'};
- root_dir = function(fname)
- return lspconfig.util.find_git_ancestor(fname)
- end;
- settings = {};
- };
- }
- end
-
-- call `setup()` to enable the FileType autocmd
->
- lspconfig.foo_lsp.setup{}
-<
-==============================================================================
-ROOT DETECTION *lspconfig-root-detection*
- *lspconfig-root-dir*
-
-A project's `root_dir` is used by `lspconfig` to determine whether `lspconfig`
-should start a new server, or attach a previous one, to the current file.
-
-`lspconfig` automatically launches language servers by defining a filetype
-autocommand based on the `filetypes` specified in the default configuration of
-each server, optionally overridable by the `filetypes` table passed to
-`setup`.
-
-This autocommand triggers a search from the current file position in the
-filesystem hierarchy up to the top level directory of your filesystem. The
-`root_dir` entry of each configuration is a function that returns true if the
-current directory in this traversal matches a given root pattern.
-
-The following utility functions are provided by `lspconfig`. Each function call
-below returns a function that takes as its argument the current buffer path.
-
-- `util.root_pattern`: function which takes multiple arguments, each
- corresponding to a different root pattern against which the contents of the
- current directory are matched using |vim.fin.glob()| while traversing up the
- filesystem.
->
- root_dir = util.root_pattern('pyproject.toml', 'requirements.txt')
-<
-- `util.find_git_ancestor`: a function that locates the first parent directory
- containing a `.git` directory.
->
- root_dir = util.find_git_ancestor
-
-- `util.find_node_modules_ancestor`: a function that locates the first parent
- directory containing a `node_modules` directory.
->
- root_dir = util.find_node_modules_ancestor
-<
-
-- `util.find_package_json_ancestor`: a function that locates the first parent
- directory containing a `package.json`.
->
- root_dir = util.find_json_ancestor
-<
-Note: On Windows, `lspconfig` always assumes forward slash normalized paths with
-capitalized drive letters.
-
-==============================================================================
-ADVANCED ROOT DIRECTORY DETECTION *lspconfig-root-advanced*
- *lspconfig-root-composition*
-
-The `root_dir` key in `config` and `setup` can hold any function of the form
->
- function custom_root_dir(filename, bufnr)
- returns nil | string
->
-This allows for rich composition of root directory patterns which is necessary
-for some project structures. Example (for Kotlin):
->
- local root_files = {
- 'settings.gradle', -- Gradle (multi-project)
- 'settings.gradle.kts', -- Gradle (multi-project)
- 'build.xml', -- Ant
- 'pom.xml', -- Maven
- }
-
- local fallback_root_files = {
- 'build.gradle', -- Gradle
- 'build.gradle.kts', -- Gradle
- }
- root_dir = function(fname)
- local primary = util.root_pattern(unpack(root_files))(fname)
- local fallback = util.root_pattern(unpack(fallback_root_files))(fname)
- return primary or fallback
- end
-<
-Browsing the source of the default configurations is recommended.
-
-==============================================================================
-SINGLE FILE SUPPORT *lspconfig-single-file-support*
-
-Language servers require each project to have a `root` in order to provide
-features that require cross-file indexing.
-
-Some servers support not passing a root directory as a proxy for single file
-mode under which cross-file features may be degraded.
-
-`lspconfig` offers limited support for an implicit single-file mode by:
-
-- first trying to resolve the root directory pattern
-- then, if `single_file_support` is enabled for a given language server
- configuration, starting the server without sending `rootDirectory` or
- `workspaceFolders` during initialization.
-- attaching subsequent files in the parent directory to the same server
- instance, depending on filetype.
-
-Cross-file features (navigation, hover) may or may not work depending on the
-language server. For a full feature-set, consider moving your files to a
-directory with a project structure `lspconfig` can infer.
-
-Note that in the event that the LSP specification is extended to support a
-standard for single-file mode, lspconfig will adopt that standard.
-
-==============================================================================
-COMMANDS *lspconfig-commands*
-
-- `:LspInfo` shows the status of active and configured language servers. Note
- that client id refers to the Nvim RPC instance connected to a given
- language server.
-
-The following commands support tab-completion for all arguments. All commands
-that require a client id can either leverage tab-completion or the info
-contained in `:LspInfo`:
-
-- `:LspStart <config_name>` launches the requested (configured) client, but only
- if it successfully resolves a root directory. Note: Defaults to all
- configured servers matching the current buffer filetype.
-- `:LspStop <client_id>` stops the server with the given client id. Defaults to
- stopping all servers active on the current buffer.
-- `:LspRestart <client_id>` restarts the client with the given client id, and
- will attempt to reattach to all previously attached buffers.
-
-==============================================================================
-EXAMPLE KEYBINDINGS *lspconfig-keybindings*
-
-`lspconfig`, and the core client, do not map any keybindings by default. The
-following is an example Lua block which demonstrates how to leverage
-`on-attach` to selectively apply keybindings after a language servers has
-attached to a given buffer.
->
->
- -- Mappings.
- -- See `:help vim.diagnostic.*` for documentation on any of the below functions
- local opts = { noremap=true, silent=true }
- vim.api.nvim_set_keymap('n', '<space>e', '<cmd>lua vim.diagnostic.open_float()<CR>', opts)
- vim.api.nvim_set_keymap('n', '[d', '<cmd>lua vim.diagnostic.goto_prev()<CR>', opts)
- vim.api.nvim_set_keymap('n', ']d', '<cmd>lua vim.diagnostic.goto_next()<CR>', opts)
- vim.api.nvim_set_keymap('n', '<space>q', '<cmd>lua vim.diagnostic.setloclist()<CR>', opts)
-
- -- Use an on_attach function to only map the following keys
- -- after the language server attaches to the current buffer
- local on_attach = function(client, bufnr)
- -- Enable completion triggered by <c-x><c-o>
- vim.api.nvim_buf_set_option(bufnr, 'omnifunc', 'v:lua.vim.lsp.omnifunc')
-
- -- Mappings.
- -- See `:help vim.lsp.*` for documentation on any of the below functions
- vim.api.nvim_buf_set_keymap(bufnr, 'n', 'gD', '<cmd>lua vim.lsp.buf.declaration()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', 'gd', '<cmd>lua vim.lsp.buf.definition()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', 'K', '<cmd>lua vim.lsp.buf.hover()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', 'gi', '<cmd>lua vim.lsp.buf.implementation()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', '<C-k>', '<cmd>lua vim.lsp.buf.signature_help()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>wa', '<cmd>lua vim.lsp.buf.add_workspace_folder()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>wr', '<cmd>lua vim.lsp.buf.remove_workspace_folder()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>wl', '<cmd>lua print(vim.inspect(vim.lsp.buf.list_workspace_folders()))<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>D', '<cmd>lua vim.lsp.buf.type_definition()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>rn', '<cmd>lua vim.lsp.buf.rename()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>ca', '<cmd>lua vim.lsp.buf.code_action()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', 'gr', '<cmd>lua vim.lsp.buf.references()<CR>', opts)
- vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>f', '<cmd>lua vim.lsp.buf.formatting()<CR>', opts)
- end
-
- -- Use a loop to conveniently call 'setup' on multiple servers and
- -- map buffer local keybindings when the language server attaches
- local servers = { 'pyright', 'rust_analyzer', 'tsserver' }
- for _, lsp in pairs(servers) do
- require('lspconfig')[lsp].setup {
- on_attach = on_attach,
- flags = {
- -- This will be the default in neovim 0.7+
- debounce_text_changes = 150,
- }
- }
- end
-<
-Note: these keymappings are meant for illustration and override some
-infrequently used default mappings.
-
-==============================================================================
-COMPLETION SUPPORT *lspconfig-completion*
-
-Manually triggered completion can be provided by Nvim's built-in omnifunc.
-See `:help omnifunc` for more details.
-
-For autocompletion, Nvim does not offer built-in functionality at this time.
-Consult the `lspconfig` wiki, which provides configuration examples for using a
-completion plugin with the built-in client
-
-==============================================================================
-DEBUGGING *lspconfig-debugging*
-
-While using language servers should be easy, debugging issues can be
-challenging. First, it is important to identify the source of the issue, which
-is typically (in rough order):
-
-- the language server itself
-- a plugin
-- overrides in a user configuration
-- the built-in client in Nvim core
-- `lspconfig`
-
-The first step in debugging is to test with a minimal configuration (such as
-`../test/minimal_init.lua`). Historically, many users problems are due to
-plugins or misconfiguration.
-
-Should that fail, identifying which component is the culprit is challenging.
-The following are the only categories of bugs that pertain to `lspconfig`.
-
-- The root directory inferred for your project is wrong, or it should be
- detected but is not due to a bug in the `lspconfig` path utilities.
-- The server is launching, but you believe that the default settings,
- initialization options, or command arguments are suboptimal and should be
- replaced based on your understanding of the server documentation.
-
-All bugs Nvim's built-in client should be reported to the Nvim core issue
-tracker. All bugs pertaining to plugins should be reported to the respective
-plugin. All missing features in a language server should be reported to the
-upstream language server issue tracker.
-
-For debugging `lspconfig` issues, the most common hurdles users face are:
-
- - The language server is not installed or is otherwise not executable.
- `lspconfig` does not install language servers for you. Ensure the `cmd`
- defined in `server_configurations.md` is executable from the command
- line. If the absolute path to the binary is not supplied in `cmd`, ensure
- it is on your PATH.
- - No root detected. `lspconfig` is built around the concept of projects. See
- |lspconfig-root-detection| for more details. Most of the time,
- initializing a git repo will suffice.
- - Misconfiguration. Often users will override `cmd`, `on_init`, or
- `handlers`. Ensure that you debug by using a stock configuration to ensure
- your customizations are not introducing issues.
-
-|LspInfo| provides an overview of your active and configured language servers
-which can be useful for debugging.
-
-Note that it will not report any configuration changes applied in
-`on_new_config`.
-
-==============================================================================
-LOGGING *lspconfig-logging*
-
-When debugging language servers, it is helpful to enable additional logging in
-the built-in client, specifically considering the RPC logs. Example:
->
- vim.lsp.set_log_level 'trace'
- if vim.fn.has 'nvim-0.5.1' == 1 then
- require('vim.lsp.log').set_format_func(vim.inspect)
- end
-<
-Attempt to run the language server, and open the log with:
-
->
- :lua vim.cmd('e'..vim.lsp.get_log_path())
-<
-Note that `ERROR` messages containing `stderr` only indicate that the log was
-sent to `stderr`. Many servers counter-intuitively send harmless messages
-via stderr.
-
-==============================================================================
-SCOPE *lspconfig-scope*
-
-`lspconfig` is a community effort to create default configurations that fit
-within the scope of an official plugin for Nvim. All features that are not
-strictly providing default configurations for language servers will be removed
-from `lspconfig` in time. The power of the Neovim LSP ecosystem is in the
-composability and flexibility of integrating multiple plugins which maximizes
-user choice and freedom.
-
-`lspconfig` also opts to adhere strictly to the LSP specification, with some
-small allowances when small modifications to a server configuration are
-necessary to enable features critical to its usability. For more featureful
-options, the `lspconfig` wiki lists community created plugins that build upon
-the built-in client to provide functionality tailored to specific language
-servers.
-
-==============================================================================
-
-vim:tw=78:ts=8:ft=help:norl:
diff --git a/start/lspconfig-0.1.3/doc/server_configurations.md b/start/lspconfig-0.1.3/doc/server_configurations.md
deleted file mode 100644
index 426c422..0000000
--- a/start/lspconfig-0.1.3/doc/server_configurations.md
+++ /dev/null
@@ -1,6554 +0,0 @@
-# Configurations
-<!-- *lspconfig-server-configurations* -->
-
-The following LSP configs are included. This documentation is autogenerated from the lua files. Follow a link to find documentation for
-that config. This file is accessible in neovim via `:help lspconfig-server-configurations`
-
-- [als](#als)
-- [angularls](#angularls)
-- [ansiblels](#ansiblels)
-- [arduino_language_server](#arduino_language_server)
-- [asm_lsp](#asm_lsp)
-- [awk_ls](#awk_ls)
-- [bashls](#bashls)
-- [beancount](#beancount)
-- [bicep](#bicep)
-- [bsl_ls](#bsl_ls)
-- [ccls](#ccls)
-- [clangd](#clangd)
-- [clarity_lsp](#clarity_lsp)
-- [clojure_lsp](#clojure_lsp)
-- [cmake](#cmake)
-- [codeqlls](#codeqlls)
-- [crystalline](#crystalline)
-- [csharp_ls](#csharp_ls)
-- [cssls](#cssls)
-- [cssmodules_ls](#cssmodules_ls)
-- [cucumber_language_server](#cucumber_language_server)
-- [dartls](#dartls)
-- [denols](#denols)
-- [dhall_lsp_server](#dhall_lsp_server)
-- [diagnosticls](#diagnosticls)
-- [dockerls](#dockerls)
-- [dotls](#dotls)
-- [efm](#efm)
-- [elixirls](#elixirls)
-- [elmls](#elmls)
-- [ember](#ember)
-- [emmet_ls](#emmet_ls)
-- [erlangls](#erlangls)
-- [esbonio](#esbonio)
-- [eslint](#eslint)
-- [flow](#flow)
-- [flux_lsp](#flux_lsp)
-- [foam_ls](#foam_ls)
-- [fortls](#fortls)
-- [fsautocomplete](#fsautocomplete)
-- [fstar](#fstar)
-- [gdscript](#gdscript)
-- [ghcide](#ghcide)
-- [golangci_lint_ls](#golangci_lint_ls)
-- [gopls](#gopls)
-- [gradle_ls](#gradle_ls)
-- [grammarly](#grammarly)
-- [graphql](#graphql)
-- [groovyls](#groovyls)
-- [haxe_language_server](#haxe_language_server)
-- [hdl_checker](#hdl_checker)
-- [hhvm](#hhvm)
-- [hie](#hie)
-- [hls](#hls)
-- [hoon_ls](#hoon_ls)
-- [html](#html)
-- [idris2_lsp](#idris2_lsp)
-- [intelephense](#intelephense)
-- [java_language_server](#java_language_server)
-- [jdtls](#jdtls)
-- [jedi_language_server](#jedi_language_server)
-- [jsonls](#jsonls)
-- [jsonnet_ls](#jsonnet_ls)
-- [julials](#julials)
-- [kotlin_language_server](#kotlin_language_server)
-- [lean3ls](#lean3ls)
-- [leanls](#leanls)
-- [lelwel_ls](#lelwel_ls)
-- [lemminx](#lemminx)
-- [ltex](#ltex)
-- [metals](#metals)
-- [mint](#mint)
-- [mm0_ls](#mm0_ls)
-- [nickel_ls](#nickel_ls)
-- [nimls](#nimls)
-- [ocamlls](#ocamlls)
-- [ocamllsp](#ocamllsp)
-- [ols](#ols)
-- [omnisharp](#omnisharp)
-- [opencl_ls](#opencl_ls)
-- [openscad_ls](#openscad_ls)
-- [pasls](#pasls)
-- [perlls](#perlls)
-- [perlnavigator](#perlnavigator)
-- [perlpls](#perlpls)
-- [phpactor](#phpactor)
-- [please](#please)
-- [powershell_es](#powershell_es)
-- [prismals](#prismals)
-- [prosemd_lsp](#prosemd_lsp)
-- [psalm](#psalm)
-- [puppet](#puppet)
-- [purescriptls](#purescriptls)
-- [pylsp](#pylsp)
-- [pyre](#pyre)
-- [pyright](#pyright)
-- [quick_lint_js](#quick_lint_js)
-- [r_language_server](#r_language_server)
-- [racket_langserver](#racket_langserver)
-- [reason_ls](#reason_ls)
-- [remark_ls](#remark_ls)
-- [rescriptls](#rescriptls)
-- [rls](#rls)
-- [rnix](#rnix)
-- [robotframework_ls](#robotframework_ls)
-- [rome](#rome)
-- [rust_analyzer](#rust_analyzer)
-- [salt_ls](#salt_ls)
-- [scry](#scry)
-- [serve_d](#serve_d)
-- [sixtyfps](#sixtyfps)
-- [slint_lsp](#slint_lsp)
-- [solang](#solang)
-- [solargraph](#solargraph)
-- [solc](#solc)
-- [solidity_ls](#solidity_ls)
-- [sorbet](#sorbet)
-- [sourcekit](#sourcekit)
-- [sourcery](#sourcery)
-- [spectral](#spectral)
-- [sqlls](#sqlls)
-- [sqls](#sqls)
-- [stylelint_lsp](#stylelint_lsp)
-- [sumneko_lua](#sumneko_lua)
-- [svelte](#svelte)
-- [svls](#svls)
-- [tailwindcss](#tailwindcss)
-- [taplo](#taplo)
-- [teal_ls](#teal_ls)
-- [terraform_lsp](#terraform_lsp)
-- [terraformls](#terraformls)
-- [texlab](#texlab)
-- [tflint](#tflint)
-- [theme_check](#theme_check)
-- [tsserver](#tsserver)
-- [typeprof](#typeprof)
-- [vala_ls](#vala_ls)
-- [vdmj](#vdmj)
-- [verible](#verible)
-- [vimls](#vimls)
-- [vls](#vls)
-- [volar](#volar)
-- [vuels](#vuels)
-- [yamlls](#yamlls)
-- [zeta_note](#zeta_note)
-- [zk](#zk)
-- [zls](#zls)
-
-## als
-
-https://github.com/AdaCore/ada_language_server
-
-Installation instructions can be found [here](https://github.com/AdaCore/ada_language_server#Install).
-
-Can be configured by passing a "settings" object to `als.setup{}`:
-
-```lua
-require('lspconfig').als.setup{
- settings = {
- ada = {
- projectFile = "project.gpr";
- scenarioVariables = { ... };
- }
- }
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.als.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ada_language_server" }
- ```
- - `filetypes` :
- ```lua
- { "ada" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("Makefile", ".git", "*.gpr", "*.adc")
- ```
-
-
-## angularls
-
-https://github.com/angular/vscode-ng-language-service
-
-`angular-language-server` can be installed via npm `npm install -g @angular/language-server`.
-
-Note, that if you override the default `cmd`, you must also update `on_new_config` to set `new_config.cmd` during startup.
-
-```lua
-local project_library_path = "/path/to/project/lib"
-local cmd = {"ngserver", "--stdio", "--tsProbeLocations", project_library_path , "--ngProbeLocations", project_library_path}
-
-require'lspconfig'.angularls.setup{
- cmd = cmd,
- on_new_config = function(new_config,new_root_dir)
- new_config.cmd = cmd
- end,
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.angularls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ngserver", "--stdio", "--tsProbeLocations", "", "--ngProbeLocations", "" }
- ```
- - `filetypes` :
- ```lua
- { "typescript", "html", "typescriptreact", "typescript.tsx" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("angular.json", ".git")
- ```
-
-
-## ansiblels
-
-https://github.com/ansible/ansible-language-server
-
-Language server for the ansible configuration management tool.
-
-`ansible-language-server` can be installed via `npm`:
-
-```sh
-npm install -g @ansible/ansible-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ansiblels.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ansible-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "yaml.ansible" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- ansible = {
- ansible = {
- path = "ansible"
- },
- ansibleLint = {
- enabled = true,
- path = "ansible-lint"
- },
- executionEnvironment = {
- enabled = false
- },
- python = {
- interpreterPath = "python"
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## arduino_language_server
-
-https://github.com/arduino/arduino-language-server
-
-Language server for Arduino
-
-The `arduino-language-server` can be installed by running:
- go get -u github.com/arduino/arduino-language-server
-
-The `arduino-cli` tools must also be installed. Follow these instructions for your distro:
- https://arduino.github.io/arduino-cli/latest/installation/
-
-After installing the `arduino-cli` tools, follow these instructions for generating
-a configuration file:
- https://arduino.github.io/arduino-cli/latest/getting-started/#create-a-configuration-file
-and make sure you install any relevant platforms libraries:
- https://arduino.github.io/arduino-cli/latest/getting-started/#install-the-core-for-your-board
-
-The language server also requires `clangd` be installed. It will look for `clangd` by default but
-the binary path can be overridden if need be.
-
-After all dependencies are installed you'll need to override the lspconfig command for the
-language server in your setup function with the necessary configurations:
-
-```lua
-lspconfig.arduino_language_server.setup({
- cmd = {
- -- Required
- "arduino-language-server",
- "-cli-config", "/path/to/arduino-cli.yaml",
- -- Optional
- "-cli", "/path/to/arduino-cli",
- "-clangd", "/path/to/clangd"
- }
-})
-```
-
-For further instruction about configuration options, run `arduino-language-server --help`.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.arduino_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "arduino-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "arduino" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## asm_lsp
-
-https://github.com/bergercookie/asm-lsp
-
-Language Server for GAS/GO Assembly
-
-`asm-lsp` can be installed via cargo:
-cargo install asm-lsp
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.asm_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "asm-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "asm", "vmasm" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## awk_ls
-
-https://github.com/Beaglefoot/awk-language-server/
-
-`awk-language-server` can be installed via `npm`:
-```sh
-npm install -g awk-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.awk_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "awk-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "awk" }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## bashls
-
-https://github.com/mads-hartmann/bash-language-server
-
-`bash-language-server` can be installed via `npm`:
-```sh
-npm i -g bash-language-server
-```
-
-Language server for bash, written using tree sitter in typescript.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.bashls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "bash-language-server", "start" }
- ```
- - `cmd_env` :
- ```lua
- {
- GLOB_PATTERN = "*@(.sh|.inc|.bash|.command)"
- }
- ```
- - `filetypes` :
- ```lua
- { "sh" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## beancount
-
-https://github.com/polarmutex/beancount-language-server#installation
-
-See https://github.com/polarmutex/beancount-language-server#configuration for configuration options
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.beancount.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "beancount-langserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "beancount" }
- ```
- - `init_options` :
- ```lua
- {
- journalFile = "",
- pythonPath = "python3"
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("elm.json")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## bicep
-
-https://github.com/azure/bicep
-Bicep language server
-
-Bicep language server can be installed by downloading and extracting a release of bicep-langserver.zip from [Bicep GitHub releases](https://github.com/Azure/bicep/releases).
-
-Bicep language server requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed.
-
-Neovim does not have built-in support for the bicep filetype which is required for lspconfig to automatically launch the language server.
-
-Filetype detection can be added via an autocmd:
-```lua
-vim.cmd [[ autocmd BufNewFile,BufRead *.bicep set filetype=bicep ]]
-```
-
-**By default, bicep language server does not have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary.
-
-```lua
-local bicep_lsp_bin = "/path/to/bicep-langserver/Bicep.LangServer.dll"
-require'lspconfig'.bicep.setup{
- cmd = { "dotnet", bicep_lsp_bin };
- ...
-}
-```
-
-To download the latest release and place in /usr/local/bin/bicep-langserver:
-```bash
-(cd $(mktemp -d) \
- && curl -fLO https://github.com/Azure/bicep/releases/latest/download/bicep-langserver.zip \
- && rm -rf /usr/local/bin/bicep-langserver \
- && unzip -d /usr/local/bin/bicep-langserver bicep-langserver.zip)
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.bicep.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "bicep" }
- ```
- - `init_options` :
- ```lua
- {}
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
-
-
-## bsl_ls
-
- https://github.com/1c-syntax/bsl-language-server
-
- Language Server Protocol implementation for 1C (BSL) - 1C:Enterprise 8 and OneScript languages.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.bsl_ls.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "bsl", "os" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git")
- ```
-
-
-## ccls
-
-https://github.com/MaskRay/ccls/wiki
-
-ccls relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified
-as compile_commands.json or, for simpler projects, a .ccls.
-For details on how to automatically generate one using CMake look [here](https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html). Alternatively, you can use [Bear](https://github.com/rizsotto/Bear).
-
-Customization options are passed to ccls at initialization time via init_options, a list of available options can be found [here](https://github.com/MaskRay/ccls/wiki/Customization#initialization-options). For example:
-
-```lua
-local lspconfig = require'lspconfig'
-lspconfig.ccls.setup {
- init_options = {
- compilationDatabaseDirectory = "build";
- index = {
- threads = 0;
- };
- clang = {
- excludeArgs = { "-frounding-math"} ;
- };
- }
-}
-
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ccls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ccls" }
- ```
- - `filetypes` :
- ```lua
- { "c", "cpp", "objc", "objcpp" }
- ```
- - `offset_encoding` :
- ```lua
- "utf-32"
- ```
- - `root_dir` :
- ```lua
- root_pattern("compile_commands.json", ".ccls", ".git")
- ```
- - `single_file_support` :
- ```lua
- false
- ```
-
-
-## clangd
-
-https://clangd.llvm.org/installation.html
-
-**NOTE:** Clang >= 11 is recommended! See [this issue for more](https://github.com/neovim/nvim-lsp/issues/23).
-
-clangd relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified as compile_commands.json, see https://clangd.llvm.org/installation#compile_commandsjson
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.clangd.setup{}
-```
-**Commands:**
-- ClangdSwitchSourceHeader: Switch between source/header
-
-**Default values:**
- - `capabilities` :
- ```lua
- default capabilities, with offsetEncoding utf-8
- ```
- - `cmd` :
- ```lua
- { "clangd" }
- ```
- - `filetypes` :
- ```lua
- { "c", "cpp", "objc", "objcpp" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(
- '.clangd',
- '.clang-tidy',
- '.clang-format',
- 'compile_commands.json',
- 'compile_flags.txt',
- 'configure.ac',
- '.git'
- )
-
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## clarity_lsp
-
-`clarity-lsp` is a language server for the Clarity language. Clarity is a decidable smart contract language that optimizes for predictability and security. Smart contracts allow developers to encode essential business logic on a blockchain.
-
-To learn how to configure the clarity language server, see the [clarity-lsp documentation](https://github.com/hirosystems/clarity-lsp).
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.clarity_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "clarity-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "clar", "clarity" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git")
- ```
-
-
-## clojure_lsp
-
-https://github.com/snoe/clojure-lsp
-
-Clojure Language Server
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.clojure_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "clojure-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "clojure", "edn" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("project.clj", "deps.edn", "build.boot", "shadow-cljs.edn", ".git")
- ```
-
-
-## cmake
-
-https://github.com/regen100/cmake-language-server
-
-CMake LSP Implementation
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.cmake.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "cmake-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "cmake" }
- ```
- - `init_options` :
- ```lua
- {
- buildDirectory = "build"
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git", "compile_commands.json", "build")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## codeqlls
-
-Reference:
-https://help.semmle.com/codeql/codeql-cli.html
-
-Binaries:
-https://github.com/github/codeql-cli-binaries
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.codeqlls.setup{}
-```
-
-
-**Default values:**
- - `before_init` :
- ```lua
- see source file
- ```
- - `cmd` :
- ```lua
- { "codeql", "execute", "language-server", "--check-errors", "ON_CHANGE", "-q" }
- ```
- - `filetypes` :
- ```lua
- { "ql" }
- ```
- - `log_level` :
- ```lua
- 2
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- search_path = "list containing all search paths, eg: '~/codeql-home/codeql-repo'"
- }
- ```
-
-
-## crystalline
-
-https://github.com/elbywan/crystalline
-
-Crystal language server.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.crystalline.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "crystalline" }
- ```
- - `filetypes` :
- ```lua
- { "crystal" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('shard.yml', '.git')
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## csharp_ls
-
-https://github.com/razzmatazz/csharp-language-server
-
-Language Server for C#.
-
-csharp-ls requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed.
-
-The preferred way to install csharp-ls is with `dotnet tool install --global csharp-ls`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.csharp_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "csharp-ls" }
- ```
- - `filetypes` :
- ```lua
- { "cs" }
- ```
- - `init_options` :
- ```lua
- {
- AutomaticWorkspaceInit = true
- }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## cssls
-
-
-https://github.com/hrsh7th/vscode-langservers-extracted
-
-`css-languageserver` can be installed via `npm`:
-
-```sh
-npm i -g vscode-langservers-extracted
-```
-
-Neovim does not currently include built-in snippets. `vscode-css-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup.
-
-```lua
---Enable (broadcasting) snippet capability for completion
-local capabilities = vim.lsp.protocol.make_client_capabilities()
-capabilities.textDocument.completion.completionItem.snippetSupport = true
-
-require'lspconfig'.cssls.setup {
- capabilities = capabilities,
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.cssls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vscode-css-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "css", "scss", "less" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("package.json", ".git") or bufdir
- ```
- - `settings` :
- ```lua
- {
- css = {
- validate = true
- },
- less = {
- validate = true
- },
- scss = {
- validate = true
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## cssmodules_ls
-
-https://github.com/antonk52/cssmodules-language-server
-
-Language server for autocompletion and go-to-definition functionality for CSS modules.
-
-You can install cssmodules-language-server via npm:
-```sh
-npm install -g cssmodules-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.cssmodules_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "cssmodules-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "typescript", "typescriptreact" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("package.json")
- ```
-
-
-## cucumber_language_server
-
-https://cucumber.io
-https://github.com/cucumber/common
-https://www.npmjs.com/package/@cucumber/language-server
-
-Language server for Cucumber.
-
-`cucumber-language-server` can be installed via `npm`:
-```sh
-npm install -g @cucumber/language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.cucumber_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "cucumber-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "cucumber" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
-
-
-## dartls
-
-https://github.com/dart-lang/sdk/tree/master/pkg/analysis_server/tool/lsp_spec
-
-Language server for dart.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.dartls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "dart", "./snapshots/analysis_server.dart.snapshot", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "dart" }
- ```
- - `init_options` :
- ```lua
- {
- closingLabels = true,
- flutterOutline = true,
- onlyAnalyzeProjectsWithOpenFiles = true,
- outline = true,
- suggestFromUnimportedLibraries = true
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("pubspec.yaml")
- ```
- - `settings` :
- ```lua
- {
- dart = {
- completeFunctionCalls = true,
- showTodos = true
- }
- }
- ```
-
-
-## denols
-
-https://github.com/denoland/deno
-
-Deno's built-in language server
-
-To approrpiately highlight codefences returned from denols, you will need to augment vim.g.markdown_fenced languages
- in your init.lua. Example:
-
-```lua
-vim.g.markdown_fenced_languages = {
- "ts=typescript"
-}
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.denols.setup{}
-```
-**Commands:**
-- DenolsCache: Cache a module and all of its dependencies.
-
-**Default values:**
- - `cmd` :
- ```lua
- { "deno", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" }
- ```
- - `handlers` :
- ```lua
- {
- ["textDocument/definition"] = <function 1>,
- ["textDocument/references"] = <function 1>
- }
- ```
- - `init_options` :
- ```lua
- {
- enable = true,
- lint = false,
- unstable = false
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("deno.json", "deno.jsonc", "tsconfig.json", ".git")
- ```
-
-
-## dhall_lsp_server
-
-https://github.com/dhall-lang/dhall-haskell/tree/master/dhall-lsp-server
-
-language server for dhall
-
-`dhall-lsp-server` can be installed via cabal:
-```sh
-cabal install dhall-lsp-server
-```
-prebuilt binaries can be found [here](https://github.com/dhall-lang/dhall-haskell/releases).
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.dhall_lsp_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "dhall-lsp-server" }
- ```
- - `filetypes` :
- ```lua
- { "dhall" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## diagnosticls
-
-https://github.com/iamcco/diagnostic-languageserver
-
-Diagnostic language server integrate with linters.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.diagnosticls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "diagnostic-languageserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- Empty by default, override to add filetypes
- ```
- - `root_dir` :
- ```lua
- Vim's starting directory
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## dockerls
-
-https://github.com/rcjsuen/dockerfile-language-server-nodejs
-
-`docker-langserver` can be installed via `npm`:
-```sh
-npm install -g dockerfile-language-server-nodejs
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.dockerls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "docker-langserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "dockerfile" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Dockerfile")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## dotls
-
-https://github.com/nikeee/dot-language-server
-
-`dot-language-server` can be installed via `npm`:
-```sh
-npm install -g dot-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.dotls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "dot-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "dot" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## efm
-
-https://github.com/mattn/efm-langserver
-
-General purpose Language Server that can use specified error message format generated from specified command.
-
-Requires at minimum EFM version [v0.0.38](https://github.com/mattn/efm-langserver/releases/tag/v0.0.38) to support
-launching the language server on single files. If on an older version of EFM, disable single file support:
-
-```lua
-require('lspconfig')['efm'].setup{
- settings = ..., -- You must populate this according to the EFM readme
- filetypes = ..., -- Populate this according to the note below
- single_file_support = false, -- This is the important line for supporting older version of EFM
-}
-```
-
-Note: In order for neovim's built-in language server client to send the appropriate `languageId` to EFM, **you must
-specify `filetypes` in your call to `setup{}`**. Otherwise `lspconfig` will launch EFM on the `BufEnter` instead
-of the `FileType` autocommand, and the `filetype` variable used to populate the `languageId` will not yet be set.
-
-```lua
-require('lspconfig')['efm'].setup{
- settings = ..., -- You must populate this according to the EFM readme
- filetypes = { 'python','cpp','lua' }
-}
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.efm.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "efm-langserver" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern(".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## elixirls
-
-https://github.com/elixir-lsp/elixir-ls
-
-`elixir-ls` can be installed by following the instructions [here](https://github.com/elixir-lsp/elixir-ls#building-and-running).
-
-```bash
-curl -fLO https://github.com/elixir-lsp/elixir-ls/releases/latest/download/elixir-ls.zip
-unzip elixir-ls.zip -d /path/to/elixir-ls
-# Unix
-chmod +x /path/to/elixir-ls/language_server.sh
-```
-
-**By default, elixir-ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped elixir-ls.
-
-```lua
-require'lspconfig'.elixirls.setup{
- -- Unix
- cmd = { "/path/to/elixir-ls/language_server.sh" };
- -- Windows
- cmd = { "/path/to/elixir-ls/language_server.bat" };
- ...
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.elixirls.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "elixir", "eelixir" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("mix.exs", ".git") or vim.loop.os_homedir()
- ```
-
-
-## elmls
-
-https://github.com/elm-tooling/elm-language-server#installation
-
-If you don't want to use Nvim to install it, then you can use:
-```sh
-npm install -g elm elm-test elm-format @elm-tooling/elm-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.elmls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "elm-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "elm" }
- ```
- - `init_options` :
- ```lua
- {
- elmAnalyseTrigger = "change"
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("elm.json")
- ```
-
-
-## ember
-
-https://github.com/lifeart/ember-language-server
-
-`ember-language-server` can be installed via `npm`:
-
-```sh
-npm install -g @lifeart/ember-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ember.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ember-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "handlebars", "typescript", "javascript" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("ember-cli-build.js", ".git")
- ```
-
-
-## emmet_ls
-
-https://github.com/aca/emmet-ls
-
-Package can be installed via `npm`:
-```sh
-npm install -g emmet-ls
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.emmet_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "emmet-ls", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "html", "css" }
- ```
- - `root_dir` :
- ```lua
- git root
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## erlangls
-
-https://erlang-ls.github.io
-
-Language Server for Erlang.
-
-Clone [erlang_ls](https://github.com/erlang-ls/erlang_ls)
-Compile the project with `make` and copy resulting binaries somewhere in your $PATH eg. `cp _build/*/bin/* ~/local/bin`
-
-Installation instruction can be found [here](https://github.com/erlang-ls/erlang_ls).
-
-Installation requirements:
- - [Erlang OTP 21+](https://github.com/erlang/otp)
- - [rebar3 3.9.1+](https://github.com/erlang/rebar3)
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.erlangls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "erlang_ls" }
- ```
- - `filetypes` :
- ```lua
- { "erlang" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('rebar.config', 'erlang.mk', '.git')
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## esbonio
-
-https://github.com/swyddfa/esbonio
-
-Esbonio is a language server for [Sphinx](https://www.sphinx-doc.org/en/master/) documentation projects.
-The language server can be installed via pip
-
-```
-pip install esbonio
-```
-
-Since Sphinx is highly extensible you will get best results if you install the language server in the same
-Python environment as the one used to build your documentation. To ensure that the correct Python environment
-is picked up, you can either launch `nvim` with the correct environment activated.
-
-```
-source env/bin/activate
-nvim
-```
-
-Or you can modify the default `cmd` to include the full path to the Python interpreter.
-
-```lua
-require'lspconfig'.esbonio.setup {
- cmd = { '/path/to/virtualenv/bin/python', '-m', 'esbonio' }
-}
-```
-
-Esbonio supports a number of config values passed as `init_options` on startup, for example.
-
-```lua
-require'lspconfig'.esbonio.setup {
- init_options = {
- server = {
- logLevel = "debug"
- },
- sphinx = {
- confDir = "/path/to/docs",
- srcDir = "${confDir}/../docs-src"
- }
-}
-```
-
-A full list and explanation of the available options can be found [here](https://swyddfa.github.io/esbonio/docs/lsp/editors/index.html)
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.esbonio.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "python3", "-m", "esbonio" }
- ```
- - `filetypes` :
- ```lua
- { "rst" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## eslint
-
-https://github.com/hrsh7th/vscode-langservers-extracted
-
-vscode-eslint-language-server: A linting engine for JavaScript / Typescript
-
-`vscode-eslint-language-server` can be installed via `npm`:
-```sh
-npm i -g vscode-langservers-extracted
-```
-
-vscode-eslint-language-server provides an EslintFixAll command that can be used to format document on save
-```vim
-autocmd BufWritePre *.tsx,*.ts,*.jsx,*.js EslintFixAll
-```
-
-See [vscode-eslint](https://github.com/microsoft/vscode-eslint/blob/55871979d7af184bf09af491b6ea35ebd56822cf/server/src/eslintServer.ts#L216-L229) for configuration options.
-
-Additional messages you can handle: eslint/noConfig
-Messages already handled in lspconfig: eslint/openDoc, eslint/confirmESLintExecution, eslint/probeFailed, eslint/noLibrary
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.eslint.setup{}
-```
-**Commands:**
-- EslintFixAll: Fix all eslint problems for this buffer
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vscode-eslint-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx", "vue" }
- ```
- - `handlers` :
- ```lua
- {
- ["eslint/confirmESLintExecution"] = <function 1>,
- ["eslint/noLibrary"] = <function 2>,
- ["eslint/openDoc"] = <function 3>,
- ["eslint/probeFailed"] = <function 4>
- }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- codeAction = {
- disableRuleComment = {
- enable = true,
- location = "separateLine"
- },
- showDocumentation = {
- enable = true
- }
- },
- codeActionOnSave = {
- enable = false,
- mode = "all"
- },
- format = true,
- nodePath = "",
- onIgnoredFiles = "off",
- packageManager = "npm",
- quiet = false,
- rulesCustomizations = {},
- run = "onType",
- useESLintClass = false,
- validate = "on",
- workingDirectory = {
- mode = "location"
- }
- }
- ```
-
-
-## flow
-
-https://flow.org/
-https://github.com/facebook/flow
-
-See below for how to setup Flow itself.
-https://flow.org/en/docs/install/
-
-See below for lsp command options.
-
-```sh
-npx flow lsp --help
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.flow.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "npx", "--no-install", "flow", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "javascript.jsx" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".flowconfig")
- ```
-
-
-## flux_lsp
-
-https://github.com/influxdata/flux-lsp
-`flux-lsp` can be installed via `cargo`:
-```sh
-cargo install --git https://github.com/influxdata/flux-lsp
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.flux_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "flux-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "flux" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## foam_ls
-
-https://github.com/FoamScience/foam-language-server
-
-`foam-language-server` can be installed via `npm`
-```sh
-npm install -g foam-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.foam_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "foam-ls", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "foam", "OpenFOAM" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## fortls
-
-https://github.com/hansec/fortran-language-server
-
-Fortran Language Server for the Language Server Protocol
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.fortls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "fortls" }
- ```
- - `filetypes` :
- ```lua
- { "fortran" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".fortls")
- ```
- - `settings` :
- ```lua
- {
- nthreads = 1
- }
- ```
-
-
-## fsautocomplete
-
-https://github.com/fsharp/FsAutoComplete
-
-Language Server for F# provided by FsAutoComplete (FSAC).
-
-FsAutoComplete requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed.
-
-The preferred way to install FsAutoComplete is with `dotnet tool install --global fsautocomplete`.
-
-Instructions to compile from source are found on the main [repository](https://github.com/fsharp/FsAutoComplete).
-
-You may also need to configure the filetype as Vim defaults to Forth for `*.fs` files:
-
-`autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp`
-
-This is automatically done by plugins such as [PhilT/vim-fsharp](https://github.com/PhilT/vim-fsharp), [fsharp/vim-fsharp](https://github.com/fsharp/vim-fsharp), and [adelarsq/neofsharp.vim](https://github.com/adelarsq/neofsharp.vim).
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.fsautocomplete.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "fsautocomplete", "--background-service-enabled" }
- ```
- - `filetypes` :
- ```lua
- { "fsharp" }
- ```
- - `init_options` :
- ```lua
- {
- AutomaticWorkspaceInit = true
- }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## fstar
-
-https://github.com/FStarLang/FStar
-
-LSP support is included in FStar. Make sure `fstar.exe` is in your PATH.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.fstar.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "fstar.exe", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "fstar" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
-
-
-## gdscript
-
-https://github.com/godotengine/godot
-
-Language server for GDScript, used by Godot Engine.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.gdscript.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "nc", "localhost", "6008" }
- ```
- - `filetypes` :
- ```lua
- { "gd", "gdscript", "gdscript3" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("project.godot", ".git")
- ```
-
-
-## ghcide
-
-https://github.com/digital-asset/ghcide
-
-A library for building Haskell IDE tooling.
-"ghcide" isn't for end users now. Use "haskell-language-server" instead of "ghcide".
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ghcide.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ghcide", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "haskell", "lhaskell" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("stack.yaml", "hie-bios", "BUILD.bazel", "cabal.config", "package.yaml")
- ```
-
-
-## golangci_lint_ls
-
-Combination of both lint server and client
-
-https://github.com/nametake/golangci-lint-langserver
-https://github.com/golangci/golangci-lint
-
-
-Installation of binaries needed is done via
-
-```
-go install github.com/nametake/golangci-lint-langserver@latest
-go install github.com/golangci/golangci-lint/cmd/golangci-lint@v1.42.1
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.golangci_lint_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "golangci-lint-langserver" }
- ```
- - `filetypes` :
- ```lua
- { "go", "gomod" }
- ```
- - `init_options` :
- ```lua
- {
- command = { "golangci-lint", "run", "--out-format", "json" }
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern('go.work') or root_pattern('go.mod', '.golangci.yaml', '.git')
- ```
-
-
-## gopls
-
-https://github.com/golang/tools/tree/master/gopls
-
-Google's lsp server for golang.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.gopls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "gopls" }
- ```
- - `filetypes` :
- ```lua
- { "go", "gomod", "gotmpl" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("go.mod", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## gradle_ls
-
-https://github.com/microsoft/vscode-gradle
-
-Microsoft's lsp server for gradle files
-
-If you're setting this up manually, build vscode-gradle using `./gradlew installDist` and point `cmd` to the `gradle-language-server` generated in the build directory
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.gradle_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "gradle-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "groovy" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("settings.gradle")
- ```
-
-
-## grammarly
-
-https://github.com/emacs-grammarly/unofficial-grammarly-language-server
-
-`unofficial-grammarly-language-server` can be installed via `npm`:
-
-```sh
-npm i -g @emacs-grammarly/unofficial-grammarly-language-server
-```
-
-WARNING: Since this language server uses Grammarly's API, any document you open with it running is shared with them. Please evaluate their [privacy policy](https://www.grammarly.com/privacy-policy) before using this.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.grammarly.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "unofficial-grammarly-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "markdown" }
- ```
- - `handlers` :
- ```lua
- {
- ["$/updateDocumentState"] = <function 1>
- }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## graphql
-
-https://github.com/graphql/graphiql/tree/main/packages/graphql-language-service-cli
-
-`graphql-lsp` can be installed via `npm`:
-
-```sh
-npm install -g graphql-language-service-cli
-```
-
-Note that you must also have [the graphql package](https://github.com/graphql/graphql-js) installed and create a [GraphQL config file](https://www.graphql-config.com/docs/user/user-introduction).
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.graphql.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "graphql-lsp", "server", "-m", "stream" }
- ```
- - `filetypes` :
- ```lua
- { "graphql", "typescriptreact", "javascriptreact" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('.git', '.graphqlrc*', '.graphql.config.*')
- ```
-
-
-## groovyls
-
-https://github.com/prominic/groovy-language-server.git
-
-Requirements:
- - Linux/macOS (for now)
- - Java 11+
-
-`groovyls` can be installed by following the instructions [here](https://github.com/prominic/groovy-language-server.git#build).
-
-If you have installed groovy language server, you can set the `cmd` custom path as follow:
-
-```lua
-require'lspconfig'.groovyls.setup{
- -- Unix
- cmd = { "java", "-jar", "path/to/groovyls/groovy-language-server-all.jar" },
- ...
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.groovyls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "java", "-jar", "groovy-language-server-all.jar" }
- ```
- - `filetypes` :
- ```lua
- { "groovy" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## haxe_language_server
-
-https://github.com/vshaxe/haxe-language-server
-
-The Haxe language server can be built by running the following commands from
-the project's root directory:
-
- npm install
- npx lix run vshaxe-build -t language-server
-
-This will create `bin/server.js`. Note that the server requires Haxe 3.4.0 or
-higher.
-
-After building the language server, set the `cmd` setting in your setup
-function:
-
-```lua
-lspconfig.haxe_language_server.setup({
- cmd = {"node", "path/to/bin/server.js"},
-})
-```
-
-By default, an HXML compiler arguments file named `build.hxml` is expected in
-your project's root directory. If your file is named something different,
-specify it using the `init_options.displayArguments` setting.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.haxe_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "haxe-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "haxe" }
- ```
- - `init_options` :
- ```lua
- {
- displayArguments = { "build.hxml" }
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("*.hxml")
- ```
- - `settings` :
- ```lua
- {
- haxe = {
- executable = "haxe"
- }
- }
- ```
-
-
-## hdl_checker
-
-https://github.com/suoto/hdl_checker
-Language server for hdl-checker.
-Install using: `pip install hdl-checker --upgrade`
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.hdl_checker.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "hdl_checker", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "vhdl", "verilog", "systemverilog" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## hhvm
-
-Language server for programs written in Hack
-https://hhvm.com/
-https://github.com/facebook/hhvm
-See below for how to setup HHVM & typechecker:
-https://docs.hhvm.com/hhvm/getting-started/getting-started
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.hhvm.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "hh_client", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "php", "hack" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".hhconfig")
- ```
-
-
-## hie
-
-https://github.com/haskell/haskell-ide-engine
-
-the following init_options are supported (see https://github.com/haskell/haskell-ide-engine#configuration):
-```lua
-init_options = {
- languageServerHaskell = {
- hlintOn = bool;
- maxNumberOfProblems = number;
- diagnosticsDebounceDuration = number;
- liquidOn = bool (default false);
- completionSnippetsOn = bool (default true);
- formatOnImportOn = bool (default true);
- formattingProvider = string (default "brittany", alternate "floskell");
- }
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.hie.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "hie-wrapper", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "haskell" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("stack.yaml", "package.yaml", ".git")
- ```
-
-
-## hls
-
-https://github.com/haskell/haskell-language-server
-
-Haskell Language Server
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.hls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "haskell-language-server-wrapper", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "haskell", "lhaskell" }
- ```
- - `lspinfo` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- root_pattern("*.cabal", "stack.yaml", "cabal.project", "package.yaml", "hie.yaml")
- ```
- - `settings` :
- ```lua
- {
- haskell = {
- formattingProvider = "ormolu"
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## hoon_ls
-
-https://github.com/urbit/hoon-language-server
-
-A language server for Hoon.
-
-The language server can be installed via `npm install -g @hoon-language-server`
-
-Start a fake ~zod with `urbit -F zod`.
-Start the language server at the Urbit Dojo prompt with: `|start %language-server`
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.hoon_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "hoon-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "hoon" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## html
-
-https://github.com/hrsh7th/vscode-langservers-extracted
-
-`vscode-html-language-server` can be installed via `npm`:
-```sh
-npm i -g vscode-langservers-extracted
-```
-
-Neovim does not currently include built-in snippets. `vscode-html-language-server` only provides completions when snippet support is enabled.
-To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup.
-
-The code-formatting feature of the lsp can be controlled with the `provideFormatter` option.
-
-```lua
---Enable (broadcasting) snippet capability for completion
-local capabilities = vim.lsp.protocol.make_client_capabilities()
-capabilities.textDocument.completion.completionItem.snippetSupport = true
-
-require'lspconfig'.html.setup {
- capabilities = capabilities,
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.html.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vscode-html-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "html" }
- ```
- - `init_options` :
- ```lua
- {
- configurationSection = { "html", "css", "javascript" },
- embeddedLanguages = {
- css = true,
- javascript = true
- },
- provideFormatter = true
- }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## idris2_lsp
-
-https://github.com/idris-community/idris2-lsp
-
-The Idris 2 language server.
-
-Plugins for the Idris 2 filetype include
-[Idris2-Vim](https://github.com/edwinb/idris2-vim) (fewer features, stable) and
-[Nvim-Idris2](https://github.com/ShinKage/nvim-idris2) (cutting-edge,
-experimental).
-
-Idris2-Lsp requires a build of Idris 2 that includes the "Idris 2 API" package.
-Package managers with known support for this build include the
-[AUR](https://aur.archlinux.org/packages/idris2-api-git/) and
-[Homebrew](https://formulae.brew.sh/formula/idris2#default).
-
-If your package manager does not support the Idris 2 API, you will need to build
-Idris 2 from source. Refer to the
-[the Idris 2 installation instructions](https://github.com/idris-lang/Idris2/blob/main/INSTALL.md)
-for details. Steps 5 and 8 are listed as "optional" in that guide, but they are
-necessary in order to make the Idris 2 API available.
-
-You need to install a version of Idris2-Lsp that is compatible with your
-version of Idris 2. There should be a branch corresponding to every released
-Idris 2 version after v0.4.0. Use the latest commit on that branch. For example,
-if you have Idris v0.5.1, you should use the v0.5.1 branch of Idris2-Lsp.
-
-If your Idris 2 version is newer than the newest Idris2-Lsp branch, use the
-latest commit on the `master` branch, and set a reminder to check the Idris2-Lsp
-repo for the release of a compatible versioned branch.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.idris2_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "idris2-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "idris2" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## intelephense
-
-https://intelephense.com/
-
-`intelephense` can be installed via `npm`:
-```sh
-npm install -g intelephense
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.intelephense.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "intelephense", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "php" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("composer.json", ".git")
- ```
-
-
-## java_language_server
-
-https://github.com/georgewfraser/java-language-server
-
-Java language server
-
-Point `cmd` to `lang_server_linux.sh` or the equivalent script for macOS/Windows provided by java-language-server
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.java_language_server.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "java" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## jdtls
-
-https://projects.eclipse.org/projects/eclipse.jdt.ls
-
-Language server for Java.
-
-IMPORTANT: If you want all the features jdtls has to offer, [nvim-jdtls](https://github.com/mfussenegger/nvim-jdtls)
-is highly recommended. If all you need is diagnostics, completion, imports, gotos and formatting and some code actions
-you can keep reading here.
-
-For manual installation you can download precompiled binaries from the
-[official downloads site](http://download.eclipse.org/jdtls/snapshots/?d)
-
-Due to the nature of java, settings cannot be inferred. Please set the following
-environmental variables to match your installation. If you need per-project configuration
-[direnv](https://github.com/direnv/direnv) is highly recommended.
-
-```bash
-# Mandatory:
-# .bashrc
-export JDTLS_HOME=/path/to/jdtls_root # Directory with the plugin and configs directories
-
-# Optional:
-export JAVA_HOME=/path/to/java_home # In case you don't have java in path or want to use a version in particular
-export WORKSPACE=/path/to/workspace # Defaults to $HOME/workspace
-```
-```lua
- -- init.lua
- require'lspconfig'.jdtls.setup{}
-```
-
-For automatic installation you can use the following unofficial installers/launchers under your own risk:
- - [jdtls-launcher](https://github.com/eruizc-dev/jdtls-launcher) (Includes lombok support by default)
- ```lua
- -- init.lua
- require'lspconfig'.jdtls.setup{ cmd = { 'jdtls' } }
- ```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.jdtls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "/usr/lib/jvm/temurin-11-jdk-amd64/bin/java", "-Declipse.application=org.eclipse.jdt.ls.core.id1", "-Dosgi.bundles.defaultStartLevel=4", "-Declipse.product=org.eclipse.jdt.ls.core.product", "-Dlog.protocol=true", "-Dlog.level=ALL", "-Xms1g", "-Xmx2G", "--add-modules=ALL-SYSTEM", "--add-opens", "java.base/java.util=ALL-UNNAMED", "--add-opens", "java.base/java.lang=ALL-UNNAMED", "-jar", "/plugins/org.eclipse.equinox.launcher_*.jar", "-configuration", "config_linux", "-data", "/home/runner/workspace" }
- ```
- - `filetypes` :
- ```lua
- { "java" }
- ```
- - `handlers` :
- ```lua
- {
- ["language/status"] = <function 1>,
- ["textDocument/codeAction"] = <function 2>,
- ["textDocument/rename"] = <function 3>,
- ["workspace/applyEdit"] = <function 4>
- }
- ```
- - `init_options` :
- ```lua
- {
- jvm_args = {},
- workspace = "/home/runner/workspace"
- }
- ```
- - `root_dir` :
- ```lua
- {
- -- Single-module projects
- {
- 'build.xml', -- Ant
- 'pom.xml', -- Maven
- 'settings.gradle', -- Gradle
- 'settings.gradle.kts', -- Gradle
- },
- -- Multi-module projects
- { 'build.gradle', 'build.gradle.kts' },
- } or vim.fn.getcwd()
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## jedi_language_server
-
-https://github.com/pappasam/jedi-language-server
-
-`jedi-language-server`, a language server for Python, built on top of jedi
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.jedi_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "jedi-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "python" }
- ```
- - `root_dir` :
- ```lua
- vim's starting directory
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## jsonls
-
-https://github.com/hrsh7th/vscode-langservers-extracted
-
-vscode-json-language-server, a language server for JSON and JSON schema
-
-`vscode-json-language-server` can be installed via `npm`:
-```sh
-npm i -g vscode-langservers-extracted
-```
-
-Neovim does not currently include built-in snippets. `vscode-json-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup.
-
-```lua
---Enable (broadcasting) snippet capability for completion
-local capabilities = vim.lsp.protocol.make_client_capabilities()
-capabilities.textDocument.completion.completionItem.snippetSupport = true
-
-require'lspconfig'.jsonls.setup {
- capabilities = capabilities,
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.jsonls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vscode-json-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "json", "jsonc" }
- ```
- - `init_options` :
- ```lua
- {
- provideFormatter = true
- }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## jsonnet_ls
-
-https://github.com/grafana/jsonnet-language-server
-
-A Language Server Protocol (LSP) server for Jsonnet.
-
-The language server can be installed with `go`:
-```sh
-go install github.com/grafana/jsonnet-language-server@latest
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.jsonnet_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "jsonnet-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "jsonnet", "libsonnet" }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- root_pattern("jsonnetfile.json")
- ```
-
-
-## julials
-
-https://github.com/julia-vscode/julia-vscode
-
-LanguageServer.jl can be installed with `julia` and `Pkg`:
-```sh
-julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.add("LanguageServer")'
-```
-where `~/.julia/environments/nvim-lspconfig` is the location where
-the default configuration expects LanguageServer.jl to be installed.
-
-To update an existing install, use the following command:
-```sh
-julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.update()'
-```
-
-Note: In order to have LanguageServer.jl pick up installed packages or dependencies in a
-Julia project, you must make sure that the project is instantiated:
-```sh
-julia --project=/path/to/my/project -e 'using Pkg; Pkg.instantiate()'
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.julials.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "julia", "--startup-file=no", "--history-file=no", "-e", ' # Load LanguageServer.jl: attempt to load from ~/.julia/environments/nvim-lspconfig\n # with the regular load path as a fallback\n ls_install_path = joinpath(\n get(DEPOT_PATH, 1, joinpath(homedir(), ".julia")),\n "environments", "nvim-lspconfig"\n )\n pushfirst!(LOAD_PATH, ls_install_path)\n using LanguageServer\n popfirst!(LOAD_PATH)\n depot_path = get(ENV, "JULIA_DEPOT_PATH", "")\n project_path = let\n dirname(something(\n ## 1. Finds an explicitly set project (JULIA_PROJECT)\n Base.load_path_expand((\n p = get(ENV, "JULIA_PROJECT", nothing);\n p === nothing ? nothing : isempty(p) ? nothing : p\n )),\n ## 2. Look for a Project.toml file in the current working directory,\n ## or parent directories, with $HOME as an upper boundary\n Base.current_project(),\n ## 3. First entry in the load path\n get(Base.load_path(), 1, nothing),\n ## 4. Fallback to default global environment,\n ## this is more or less unreachable\n Base.load_path_expand("@v#.#"),\n ))\n end\n @info "Running language server" VERSION pwd() project_path depot_path\n server = LanguageServer.LanguageServerInstance(stdin, stdout, project_path, depot_path)\n server.runlinter = true\n run(server)\n ' }
- ```
- - `filetypes` :
- ```lua
- { "julia" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## kotlin_language_server
-
- A kotlin language server which was developed for internal usage and
- released afterwards. Maintaining is not done by the original author,
- but by fwcd.
-
- It is built via gradle and developed on github.
- Source and additional description:
- https://github.com/fwcd/kotlin-language-server
-
- This server requires vim to be aware of the kotlin-filetype.
- You could refer for this capability to:
- https://github.com/udalov/kotlin-vim (recommended)
- Note that there is no LICENSE specified yet.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.kotlin_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "kotlin-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "kotlin" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("settings.gradle")
- ```
-
-
-## lean3ls
-
-https://github.com/leanprover/lean-client-js/tree/master/lean-language-server
-
-Lean installation instructions can be found
-[here](https://leanprover-community.github.io/get_started.html#regular-install).
-
-Once Lean is installed, you can install the Lean 3 language server by running
-```sh
-npm install -g lean-language-server
-```
-
-Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim),
-that plugin fully handles the setup of the Lean language server,
-and you shouldn't set up `lean3ls` both with it and `lspconfig`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.lean3ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "lean-language-server", "--stdio", "--", "-M", "4096", "-T", "100000" }
- ```
- - `filetypes` :
- ```lua
- { "lean3" }
- ```
- - `offset_encoding` :
- ```lua
- "utf-32"
- ```
- - `root_dir` :
- ```lua
- root_pattern("leanpkg.toml") or root_pattern(".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## leanls
-
-https://github.com/leanprover/lean4
-
-Lean installation instructions can be found
-[here](https://leanprover-community.github.io/get_started.html#regular-install).
-
-The Lean 4 language server is built-in with a Lean 4 install
-(and can be manually run with, e.g., `lean --server`).
-
-Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim),
-that plugin fully handles the setup of the Lean language server,
-and you shouldn't set up `leanls` both with it and `lspconfig`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.leanls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "lake", "serve", "--" }
- ```
- - `filetypes` :
- ```lua
- { "lean" }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `options` :
- ```lua
- {
- no_lake_lsp_cmd = { "lean", "--server" }
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("lakefile.lean", "lean-toolchain", "leanpkg.toml", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## lelwel_ls
-
-https://github.com/0x2a-42/lelwel
-
-Language server for lelwel grammars.
-
-You can install `lelwel-ls` via cargo:
-```sh
-cargo install --features="lsp" lelwel
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.lelwel_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "lelwel-ls" }
- ```
- - `filetypes` :
- ```lua
- { "llw" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## lemminx
-
-https://github.com/eclipse/lemminx
-
-The easiest way to install the server is to get a binary at https://download.jboss.org/jbosstools/vscode/stable/lemminx-binary/ and place it in your PATH.
-
-NOTE to macOS users: Binaries from unidentified developers are blocked by default. If you trust the downloaded binary from jboss.org, run it once, cancel the prompt, then remove the binary from Gatekeeper quarantine with `xattr -d com.apple.quarantine lemminx`. It should now run without being blocked.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.lemminx.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "lemminx" }
- ```
- - `filetypes` :
- ```lua
- { "xml", "xsd", "xsl", "xslt", "svg" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## ltex
-
-https://github.com/valentjn/ltex-ls
-
-LTeX Language Server: LSP language server for LanguageTool 🔍✔️ with support for LaTeX 🎓, Markdown 📝, and others
-
-To install, download the latest [release](https://github.com/valentjn/ltex-ls/releases) and ensure `ltex-ls` is on your path.
-
-To support org files or R sweave, users can define a custom filetype autocommand (or use a plugin which defines these filetypes):
-
-```lua
-vim.cmd [[ autocmd BufRead,BufNewFile *.org set filetype=org ]]
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ltex.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ltex-ls" }
- ```
- - `filetypes` :
- ```lua
- { "bib", "gitcommit", "markdown", "org", "plaintex", "rst", "rnoweb", "tex" }
- ```
- - `get_language_id` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## metals
-
-https://scalameta.org/metals/
-
-Scala language server with rich IDE features.
-
-See full instructions in the Metals documentation:
-
-https://scalameta.org/metals/docs/editors/vim.html#using-an-alternative-lsp-client
-
-Note: that if you're using [nvim-metals](https://github.com/scalameta/nvim-metals), that plugin fully handles the setup and installation of Metals, and you shouldn't set up Metals both with it and `lspconfig`.
-
-To install Metals, make sure to have [coursier](https://get-coursier.io/docs/cli-installation) installed, and once you do you can install the latest Metals with `cs install metals`. You can also manually bootstrap Metals with the following command.
-
-```bash
-cs bootstrap \
- --java-opt -Xss4m \
- --java-opt -Xms100m \
- org.scalameta:metals_2.12:<enter-version-here> \
- -r bintray:scalacenter/releases \
- -r sonatype:snapshots \
- -o /usr/local/bin/metals -f
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.metals.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "metals" }
- ```
- - `filetypes` :
- ```lua
- { "scala" }
- ```
- - `init_options` :
- ```lua
- {
- compilerOptions = {
- snippetAutoIndent = false
- },
- isHttpEnabled = true,
- statusBarProvider = "show-message"
- }
- ```
- - `message_level` :
- ```lua
- 4
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("build.sbt", "build.sc", "build.gradle", "pom.xml")
- ```
-
-
-## mint
-
-https://www.mint-lang.com
-
-Install Mint using the [instructions](https://www.mint-lang.com/install).
-The language server is included since version 0.12.0.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.mint.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "mint", "ls" }
- ```
- - `filetypes` :
- ```lua
- { "mint" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## mm0_ls
-
-https://github.com/digama0/mm0
-
-Language Server for the metamath-zero theorem prover.
-
-Requires [mm0-rs](https://github.com/digama0/mm0/tree/master/mm0-rs) to be installed
-and available on the `PATH`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.mm0_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "mm0-rs", "server" }
- ```
- - `filetypes` :
- ```lua
- { "metamath-zero" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## nickel_ls
-
-Nickel Language Server
-
-https://github.com/tweag/nickel
-
-`nls` can be installed with nix, or cargo, from the Nickel repository.
-```sh
-git clone https://github.com/tweag/nickel.git
-```
-
-Nix:
-```sh
-cd nickel
-nix-env -f . -i
-```
-
-cargo:
-```sh
-cd nickel/lsp/nls
-cargo install --path .
-```
-
-In order to have lspconfig detect Nickel filetypes (a prequisite for autostarting a server),
-install the [Nickel vim plugin](https://github.com/nickel-lang/vim-nickel).
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.nickel_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "nls" }
- ```
- - `filetypes` :
- ```lua
- { "ncl", "nickel" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## nimls
-
-https://github.com/PMunch/nimlsp
-`nimlsp` can be installed via the `nimble` package manager:
-```sh
-nimble install nimlsp
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.nimls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "nimlsp" }
- ```
- - `filetypes` :
- ```lua
- { "nim" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## ocamlls
-
-https://github.com/ocaml-lsp/ocaml-language-server
-
-`ocaml-language-server` can be installed via `npm`
-```sh
-npm install -g ocaml-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ocamlls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ocaml-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "ocaml", "reason" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("*.opam", "esy.json", "package.json")
- ```
-
-
-## ocamllsp
-
-https://github.com/ocaml/ocaml-lsp
-
-`ocaml-lsp` can be installed as described in [installation guide](https://github.com/ocaml/ocaml-lsp#installation).
-
-To install the lsp server in a particular opam switch:
-```sh
-opam pin add ocaml-lsp-server https://github.com/ocaml/ocaml-lsp.git
-opam install ocaml-lsp-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ocamllsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ocamllsp" }
- ```
- - `filetypes` :
- ```lua
- { "ocaml", "ocaml.menhir", "ocaml.interface", "ocaml.ocamllex", "reason" }
- ```
- - `get_language_id` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- root_pattern("*.opam", "esy.json", "package.json", ".git")
- ```
-
-
-## ols
-
- https://github.com/DanielGavin/ols
-
- `Odin Language Server`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ols.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ols" }
- ```
- - `filetypes` :
- ```lua
- { "odin" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("ols.json", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## omnisharp
-
-https://github.com/omnisharp/omnisharp-roslyn
-OmniSharp server based on Roslyn workspaces
-
-`omnisharp-roslyn` can be installed by downloading and extracting a release from [here](https://github.com/OmniSharp/omnisharp-roslyn/releases).
-Omnisharp can also be built from source by following the instructions [here](https://github.com/omnisharp/omnisharp-roslyn#downloading-omnisharp).
-
-Omnisharp requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed.
-
-**By default, omnisharp-roslyn doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary.
-
-```lua
-local pid = vim.fn.getpid()
--- On linux/darwin if using a release build, otherwise under scripts/OmniSharp(.Core)(.cmd)
-local omnisharp_bin = "/path/to/omnisharp-repo/run"
--- on Windows
--- local omnisharp_bin = "/path/to/omnisharp/OmniSharp.exe"
-require'lspconfig'.omnisharp.setup{
- cmd = { omnisharp_bin, "--languageserver" , "--hostPID", tostring(pid) };
- ...
-}
-```
-
-Note, if you download the executable for darwin you will need to strip the quarantine label to run:
-```bash
-find /path/to/omnisharp-osx | xargs xattr -r -d com.apple.quarantine
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.omnisharp.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "cs", "vb" }
- ```
- - `init_options` :
- ```lua
- {}
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- root_pattern(".sln") or root_pattern(".csproj")
- ```
-
-
-## opencl_ls
-
-https://github.com/Galarius/opencl-language-server
-
-Build instructions can be found [here](https://github.com/Galarius/opencl-language-server/blob/main/_dev/build.md).
-
-Prebuilt binaries are available for Linux, macOS and Windows [here](https://github.com/Galarius/opencl-language-server/releases).
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.opencl_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "opencl-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "opencl" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern(".git")
- ```
-
-
-## openscad_ls
-
-https://github.com/dzhu/openscad-language-server
-
-A Language Server Protocol server for OpenSCAD
-
-You can build and install `openscad-language-server` binary with `cargo`:
-```sh
-cargo install openscad-language-server
-```
-
-Vim does not have built-in syntax for the `openscad` filetype currently.
-
-This can be added via an autocmd:
-
-```lua
-vim.cmd [[ autocmd BufRead,BufNewFile *.scad set filetype=openscad ]]
-```
-
-or by installing a filetype plugin such as https://github.com/sirtaj/vim-openscad
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.openscad_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "openscad-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "openscad" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## pasls
-
-https://github.com/genericptr/pascal-language-server
-
-An LSP server implementation for Pascal variants that are supported by Free Pascal, including Object Pascal. It uses CodeTools from Lazarus as backend.
-
-First set `cmd` to the Pascal lsp binary.
-
-Customization options are passed to pasls as environment variables for example in your `.bashrc`:
-```bash
-export FPCDIR='/usr/lib/fpc/src' # FPC source directory (This is the only required option for the server to work).
-export PP='/usr/lib/fpc/3.2.2/ppcx64' # Path to the Free Pascal compiler executable.
-export LAZARUSDIR='/usr/lib/lazarus' # Path to the Lazarus sources.
-export FPCTARGET='' # Target operating system for cross compiling.
-export FPCTARGETCPU='x86_64' # Target CPU for cross compiling.
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.pasls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "pasls" }
- ```
- - `filetypes` :
- ```lua
- { "pascal" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## perlls
-
-https://github.com/richterger/Perl-LanguageServer/tree/master/clients/vscode/perl
-
-`Perl-LanguageServer`, a language server for Perl.
-
-To use the language server, ensure that you have Perl::LanguageServer installed and perl command is on your path.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.perlls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "perl", "-MPerl::LanguageServer", "-e", "Perl::LanguageServer::run", "--", "--port 13603", "--nostdio 0", "--version 2.1.0" }
- ```
- - `filetypes` :
- ```lua
- { "perl" }
- ```
- - `root_dir` :
- ```lua
- vim's starting directory
- ```
- - `settings` :
- ```lua
- {
- perl = {
- fileFilter = { ".pm", ".pl" },
- ignoreDirs = ".git",
- perlCmd = "perl",
- perlInc = " "
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## perlnavigator
-
-https://github.com/bscan/PerlNavigator
-
-A Perl language server
-
-**By default, perlnavigator doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path.
-You have to install the language server manually.
-
-Clone the PerlNavigator repo, install based on the [instructions](https://github.com/bscan/PerlNavigator#installation-for-other-editors),
-and point `cmd` to `server.js` inside the `server/out` directory:
-
-```lua
-cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'}
-```
-
-At minimum, you will need `perl` in your path. If you want to use a non-standard `perl` you will need to set your configuration like so:
-```lua
-settings = {
- perlnavigator = {
- perlPath = '/some/odd/location/my-perl'
- }
-}
-```
-
-The `contributes.configuration.properties` section of `perlnavigator`'s `package.json` has all available configuration settings. All
-settings have a reasonable default, but, at minimum, you may want to point `perlnavigator` at your `perltidy` and `perlcritic` configurations.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.perlnavigator.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- {}
- ```
- - `filetypes` :
- ```lua
- { "perl" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## perlpls
-
-https://github.com/FractalBoy/perl-language-server
-https://metacpan.org/pod/PLS
-
-`PLS`, another language server for Perl.
-
-To use the language server, ensure that you have PLS installed and that it is in your path
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.perlpls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "pls" }
- ```
- - `filetypes` :
- ```lua
- { "perl" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `settings` :
- ```lua
- {
- perl = {
- perlcritic = {
- enabled = false
- },
- syntax = {
- enabled = true
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## phpactor
-
-https://github.com/phpactor/phpactor
-
-Installation: https://phpactor.readthedocs.io/en/master/usage/standalone.html#global-installation
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.phpactor.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "phpactor", "language-server" }
- ```
- - `filetypes` :
- ```lua
- { "php" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("composer.json", ".git")
- ```
-
-
-## please
-
-https://github.com/thought-machine/please
-
-High-performance extensible build system for reproducible multi-language builds.
-
-The `plz` binary will automatically install the LSP for you on first run
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.please.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "plz", "tool", "lps" }
- ```
- - `filetypes` :
- ```lua
- { "bzl" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## powershell_es
-
-https://github.com/PowerShell/PowerShellEditorServices
-
-Language server for PowerShell.
-
-To install, download and extract PowerShellEditorServices.zip
-from the [releases](https://github.com/PowerShell/PowerShellEditorServices/releases).
-To configure the language server, set the property `bundle_path` to the root
-of the extracted PowerShellEditorServices.zip.
-
-The default configuration doesn't set `cmd` unless `bundle_path` is specified.
-
-```lua
-require'lspconfig'.powershell_es.setup{
- bundle_path = 'c:/w/PowerShellEditorServices',
-}
-```
-
-By default the languageserver is started in `pwsh` (PowerShell Core). This can be changed by specifying `shell`.
-
-```lua
-require'lspconfig'.powershell_es.setup{
- bundle_path = 'c:/w/PowerShellEditorServices',
- shell = 'powershell.exe',
-}
-```
-
-Note that the execution policy needs to be set to `Unrestricted` for the languageserver run under PowerShell
-
-If necessary, specific `cmd` can be defined instead of `bundle_path`.
-See [PowerShellEditorServices](https://github.com/PowerShell/PowerShellEditorServices#stdio)
-to learn more.
-
-```lua
-require'lspconfig'.powershell_es.setup{
- cmd = {'pwsh', '-NoLogo', '-NoProfile', '-Command', "c:/PSES/Start-EditorServices.ps1 ..."}
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.powershell_es.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "ps1" }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- git root or current directory
- ```
- - `shell` :
- ```lua
- "pwsh"
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## prismals
-
-Language Server for the Prisma JavaScript and TypeScript ORM
-
-`@prisma/language-server` can be installed via npm
-```sh
-npm install -g @prisma/language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.prismals.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "prisma-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "prisma" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git", "package.json")
- ```
- - `settings` :
- ```lua
- {
- prisma = {
- prismaFmtBinPath = ""
- }
- }
- ```
-
-
-## prosemd_lsp
-
-https://github.com/kitten/prosemd-lsp
-
-An experimental LSP for Markdown.
-
-Please see the manual installation instructions: https://github.com/kitten/prosemd-lsp#manual-installation
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.prosemd_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "prosemd-lsp", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "markdown" }
- ```
- - `root_dir` :
- ```lua
- <function 1>
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## psalm
-
-https://github.com/vimeo/psalm
-
-Can be installed with composer.
-```sh
-composer global require vimeo/psalm
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.psalm.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "psalm-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "php" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("psalm.xml", "psalm.xml.dist")
- ```
-
-
-## puppet
-
-LSP server for Puppet.
-
-Installation:
-
-- Clone the editor-services repository:
- https://github.com/puppetlabs/puppet-editor-services
-
-- Navigate into that directory and run: `bundle install`
-
-- Install the 'puppet-lint' gem: `gem install puppet-lint`
-
-- Add that repository to $PATH.
-
-- Ensure you can run `puppet-languageserver` from outside the editor-services directory.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.puppet.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "puppet-languageserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "puppet" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("manifests", ".puppet-lint.rc", "hiera.yaml", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## purescriptls
-
-https://github.com/nwolverson/purescript-language-server
-`purescript-language-server` can be installed via `npm`
-```sh
-npm install -g purescript-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.purescriptls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "purescript-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "purescript" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("spago.dhall, 'psc-package.json', bower.json")
- ```
-
-
-## pylsp
-
-https://github.com/python-lsp/python-lsp-server
-
-A Python 3.6+ implementation of the Language Server Protocol.
-
-The language server can be installed via `pipx install 'python-lsp-server[all]'`.
-Further instructions can be found in the [project's README](https://github.com/python-lsp/python-lsp-server).
-
-Note: This is a community fork of `pyls`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.pylsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "pylsp" }
- ```
- - `filetypes` :
- ```lua
- { "python" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## pyre
-
-https://pyre-check.org/
-
-`pyre` a static type checker for Python 3.
-
-`pyre` offers an extremely limited featureset. It currently only supports diagnostics,
-which are triggered on save.
-
-Do not report issues for missing features in `pyre` to `lspconfig`.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.pyre.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "pyre", "persistent" }
- ```
- - `filetypes` :
- ```lua
- { "python" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## pyright
-
-https://github.com/microsoft/pyright
-
-`pyright`, a static type checker and language server for python
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.pyright.setup{}
-```
-**Commands:**
-- PyrightOrganizeImports: Organize Imports
-
-**Default values:**
- - `cmd` :
- ```lua
- { "pyright-langserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "python" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- python = {
- analysis = {
- autoSearchPaths = true,
- diagnosticMode = "workspace",
- useLibraryCodeForTypes = true
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## quick_lint_js
-
-https://quick-lint-js.com/
-
-quick-lint-js finds bugs in JavaScript programs.
-
-See installation [instructions](https://quick-lint-js.com/install/)
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.quick_lint_js.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "quick-lint-js", "--lsp-server" }
- ```
- - `filetypes` :
- ```lua
- { "javascript" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## r_language_server
-
-[languageserver](https://github.com/REditorSupport/languageserver) is an
-implementation of the Microsoft's Language Server Protocol for the R
-language.
-
-It is released on CRAN and can be easily installed by
-
-```R
-install.packages("languageserver")
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.r_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "R", "--slave", "-e", "languageserver::run()" }
- ```
- - `filetypes` :
- ```lua
- { "r", "rmd" }
- ```
- - `log_level` :
- ```lua
- 2
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git") or os_homedir
- ```
-
-
-## racket_langserver
-
-[https://github.com/jeapostrophe/racket-langserver](https://github.com/jeapostrophe/racket-langserver)
-
-The Racket language server. This project seeks to use
-[DrRacket](https://github.com/racket/drracket)'s public API to provide
-functionality that mimics DrRacket's code tools as closely as possible.
-
-Install via `raco`: `raco pkg install racket-langserver`
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.racket_langserver.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "racket", "--lib", "racket-langserver" }
- ```
- - `filetypes` :
- ```lua
- { "racket", "scheme" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## reason_ls
-
-Reason language server
-
-**By default, reason_ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path.
-You have to install the language server manually.
-
-You can install reason language server from [reason-language-server](https://github.com/jaredly/reason-language-server) repository.
-
-```lua
-cmd = {'<path_to_reason_language_server>'}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.reason_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "reason-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "reason" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## remark_ls
-
-https://github.com/remarkjs/remark-language-server
-
-`remark-language-server` can be installed via `npm`:
-```sh
-npm install -g remark-language-server
-```
-
-`remark-language-server` uses the same
-[configuration files](https://github.com/remarkjs/remark/tree/main/packages/remark-cli#example-config-files-json-yaml-js)
-as `remark-cli`.
-
-This uses a plugin based system. Each plugin needs to be installed locally using `npm` or `yarn`.
-
-For example, given the following `.remarkrc.json`:
-
-```json
-{
- "presets": [
- "remark-preset-lint-recommended"
- ]
-}
-```
-
-`remark-preset-lint-recommended` needs to be installed in the local project:
-
-```sh
-npm install remark-preset-lint-recommended
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.remark_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "remark-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "markdown" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## rescriptls
-
-https://github.com/rescript-lang/rescript-vscode
-
-ReScript language server
-
-**By default, rescriptls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path.
-You have to install the language server manually.
-
-You can use the bundled language server inside the [vim-rescript](https://github.com/rescript-lang/vim-rescript) repo.
-
-Clone the vim-rescript repo and point `cmd` to `server.js` inside `server/out` directory:
-
-```lua
-cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'}
-
-```
-
-If you have vim-rescript installed you can also use that installation. for example if you're using packer.nvim you can set cmd to something like this:
-
-```lua
-cmd = {
- 'node',
- '/home/username/.local/share/nvim/site/pack/packer/start/vim-rescript/server/out/server.js',
- '--stdio'
-}
-```
-
-Another option is to use vscode extension [release](https://github.com/rescript-lang/rescript-vscode/releases).
-Take a look at [here](https://github.com/rescript-lang/rescript-vscode#use-with-other-editors) for instructions.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.rescriptls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- {}
- ```
- - `filetypes` :
- ```lua
- { "rescript" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## rls
-
-https://github.com/rust-lang/rls
-
-rls, a language server for Rust
-
-See https://github.com/rust-lang/rls#setup to setup rls itself.
-See https://github.com/rust-lang/rls#configuration for rls-specific settings.
-All settings listed on the rls configuration section of the readme
-must be set under settings.rust as follows:
-
-```lua
-nvim_lsp.rls.setup {
- settings = {
- rust = {
- unstable_features = true,
- build_on_save = false,
- all_features = true,
- },
- },
-}
-```
-
-If you want to use rls for a particular build, eg nightly, set cmd as follows:
-
-```lua
-cmd = {"rustup", "run", "nightly", "rls"}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.rls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "rls" }
- ```
- - `filetypes` :
- ```lua
- { "rust" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Cargo.toml")
- ```
-
-
-## rnix
-
-https://github.com/nix-community/rnix-lsp
-
-A language server for Nix providing basic completion and formatting via nixpkgs-fmt.
-
-To install manually, run `cargo install rnix-lsp`. If you are using nix, rnix-lsp is in nixpkgs.
-
-This server accepts configuration via the `settings` key.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.rnix.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "rnix-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "nix" }
- ```
- - `init_options` :
- ```lua
- {}
- ```
- - `root_dir` :
- ```lua
- vim's starting directory
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## robotframework_ls
-
-https://github.com/robocorp/robotframework-lsp
-
-Language Server Protocol implementation for Robot Framework.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.robotframework_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "robotframework_ls" }
- ```
- - `filetypes` :
- ```lua
- { "robot" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern('robotidy.toml', 'pyproject.toml')(fname) or util.find_git_ancestor(fname)
- ```
-
-
-## rome
-
-https://rome.tools
-
-Language server for the Rome Frontend Toolchain.
-
-```sh
-npm install [-g] rome
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.rome.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "rome", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "json", "typescript", "typescript.tsx", "typescriptreact" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('package.json', 'node_modules', '.git')
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## rust_analyzer
-
-https://github.com/rust-analyzer/rust-analyzer
-
-rust-analyzer (aka rls 2.0), a language server for Rust
-
-See [docs](https://github.com/rust-analyzer/rust-analyzer/tree/master/docs/user#settings) for extra settings.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.rust_analyzer.setup{}
-```
-**Commands:**
-- CargoReload: Reload current cargo workspace
-
-**Default values:**
- - `cmd` :
- ```lua
- { "rust-analyzer" }
- ```
- - `filetypes` :
- ```lua
- { "rust" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Cargo.toml", "rust-project.json")
- ```
- - `settings` :
- ```lua
- {
- ["rust-analyzer"] = {}
- }
- ```
-
-
-## salt_ls
-
-Language server for Salt configuration files.
-https://github.com/dcermak/salt-lsp
-
-The language server can be installed with `pip`:
-```sh
-pip install salt-lsp
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.salt_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "salt_lsp_server" }
- ```
- - `filetypes` :
- ```lua
- { "sls" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('.git')
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## scry
-
-https://github.com/crystal-lang-tools/scry
-
-Crystal language server.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.scry.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "scry" }
- ```
- - `filetypes` :
- ```lua
- { "crystal" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('shard.yml', '.git')
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## serve_d
-
- https://github.com/Pure-D/serve-d
-
- `Microsoft language server protocol implementation for D using workspace-d.`
- Download a binary from https://github.com/Pure-D/serve-d/releases and put it in your $PATH.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.serve_d.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "serve-d" }
- ```
- - `filetypes` :
- ```lua
- { "d" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("dub.json", "dub.sdl", ".git")
- ```
-
-
-## sixtyfps
-
-https://github.com/sixtyfpsui/sixtyfps
-`SixtyFPS`'s language server
-
-You can build and install `sixtyfps-lsp` binary with `cargo`:
-```sh
-cargo install sixtyfps-lsp
-```
-
-Vim does not have built-in syntax for the `sixtyfps` filetype currently.
-
-This can be added via an autocmd:
-
-```lua
-vim.cmd [[ autocmd BufRead,BufNewFile *.60 set filetype=sixtyfps ]]
-```
-
-or by installing a filetype plugin such as https://github.com/RustemB/sixtyfps-vim
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sixtyfps.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "sixtyfps-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "sixtyfps" }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## slint_lsp
-
-https://github.com/slint-ui/slint
-`Slint`'s language server
-
-You can build and install `slint-lsp` binary with `cargo`:
-```sh
-cargo install slint-lsp
-```
-
-Vim does not have built-in syntax for the `slint` filetype at this time.
-
-This can be added via an autocmd:
-
-```lua
-vim.cmd [[ autocmd BufRead,BufNewFile *.slint set filetype=slint ]]
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.slint_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "slint-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "slint" }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## solang
-
-A language server for Solidity
-
-See the [documentation](https://solang.readthedocs.io/en/latest/installing.html) for installation instructions.
-
-The language server only provides the following capabilities:
-* Syntax highlighting
-* Diagnostics
-* Hover
-
-There is currently no support for completion, goto definition, references, or other functionality.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.solang.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "solang", "--language-server", "--target", "ewasm" }
- ```
- - `filetypes` :
- ```lua
- { "solidity" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
-
-
-## solargraph
-
-https://solargraph.org/
-
-solargraph, a language server for Ruby
-
-You can install solargraph via gem install.
-
-```sh
-gem install --user-install solargraph
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.solargraph.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "solargraph", "stdio" }
- ```
- - `filetypes` :
- ```lua
- { "ruby" }
- ```
- - `init_options` :
- ```lua
- {
- formatting = true
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Gemfile", ".git")
- ```
- - `settings` :
- ```lua
- {
- solargraph = {
- diagnostics = true
- }
- }
- ```
-
-
-## solc
-
-https://docs.soliditylang.org/en/latest/installing-solidity.html
-
-solc is the native language server for the Solidity language.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.solc.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "solc", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "solidity" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git")
- ```
-
-
-## solidity_ls
-
-npm install -g solidity-language-server
-
-solidity-language-server is a language server for the solidity language ported from the vscode solidity extension
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.solidity_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "solidity-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "solidity" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git", "package.json")
- ```
-
-
-## sorbet
-
-https://sorbet.org
-
-Sorbet is a fast, powerful type checker designed for Ruby.
-
-You can install Sorbet via gem install. You might also be interested in how to set
-Sorbet up for new projects: https://sorbet.org/docs/adopting.
-
-```sh
-gem install sorbet
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sorbet.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "srb", "tc", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "ruby" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Gemfile", ".git")
- ```
-
-
-## sourcekit
-
-https://github.com/apple/sourcekit-lsp
-
-Language server for Swift and C/C++/Objective-C.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sourcekit.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "sourcekit-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "swift", "c", "cpp", "objective-c", "objective-cpp" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Package.swift", ".git")
- ```
-
-
-## sourcery
-
-https://github.com/sourcery-ai/sourcery
-
-Refactor Python instantly using the power of AI.
-
-It requires the initializationOptions param to be populated as shown below and will respond with the list of ServerCapabilities that it supports.
-
-init_options = {
- --- The Sourcery token for authenticating the user.
- --- This is retrieved from the Sourcery website and must be
- --- provided by each user. The extension must provide a
- --- configuration option for the user to provide this value.
- token = <YOUR_TOKEN>
-
- --- The extension's name and version as defined by the extension.
- extension_version = 'vim.lsp'
-
- --- The editor's name and version as defined by the editor.
- editor_version = 'vim'
-}
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sourcery.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "sourcery", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "python" }
- ```
- - `init_options` :
- ```lua
- {
- editor_version = "vim",
- extension_version = "vim.lsp"
- }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## spectral
-
-https://github.com/luizcorreia/spectral-language-server
- `A flexible JSON/YAML linter for creating automated style guides, with baked in support for OpenAPI v2 & v3.`
-
-`spectral-language-server` can be installed via `npm`:
-```sh
-npm i -g spectral-language-server
-```
-See [vscode-spectral](https://github.com/stoplightio/vscode-spectral#extension-settings) for configuration options.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.spectral.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "spectral-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "yaml", "json", "yml" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- enable = true,
- run = "onType",
- validateLanguages = { "yaml", "json", "yml" }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## sqlls
-
-https://github.com/joe-re/sql-language-server
-
-This LSP can be installed via `npm`. Find further instructions on manual installation of the sql-language-server at [joe-re/sql-language-server](https://github.com/joe-re/sql-language-server).
-<br>
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sqlls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "sql-language-server", "up", "--method", "stdio" }
- ```
- - `filetypes` :
- ```lua
- { "sql", "mysql" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## sqls
-
-https://github.com/lighttiger2505/sqls
-
-```lua
-require'lspconfig'.sqls.setup{
- cmd = {"path/to/command", "-config", "path/to/config.yml"};
- ...
-}
-```
-Sqls can be installed via `go get github.com/lighttiger2505/sqls`. Instructions for compiling Sqls from the source can be found at [lighttiger2505/sqls](https://github.com/lighttiger2505/sqls).
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sqls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "sqls" }
- ```
- - `filetypes` :
- ```lua
- { "sql", "mysql" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## stylelint_lsp
-
-https://github.com/bmatcuk/stylelint-lsp
-
-`stylelint-lsp` can be installed via `npm`:
-
-```sh
-npm i -g stylelint-lsp
-```
-
-Can be configured by passing a `settings.stylelintplus` object to `stylelint_lsp.setup`:
-
-```lua
-require'lspconfig'.stylelint_lsp.setup{
- settings = {
- stylelintplus = {
- -- see available options in stylelint-lsp documentation
- }
- }
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.stylelint_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "stylelint-lsp", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "css", "less", "scss", "sugarss", "vue", "wxss", "javascript", "javascriptreact", "typescript", "typescriptreact" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('.stylelintrc', 'package.json')
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## sumneko_lua
-
-https://github.com/sumneko/lua-language-server
-
-Lua language server.
-
-`lua-language-server` can be installed by following the instructions [here](https://github.com/sumneko/lua-language-server/wiki/Build-and-Run). The default `cmd` assumes that the `lua-language-server` binary can be found in `$PATH`.
-
-```lua
-local runtime_path = vim.split(package.path, ';')
-table.insert(runtime_path, "lua/?.lua")
-table.insert(runtime_path, "lua/?/init.lua")
-
-require'lspconfig'.sumneko_lua.setup {
- settings = {
- Lua = {
- runtime = {
- -- Tell the language server which version of Lua you're using (most likely LuaJIT in the case of Neovim)
- version = 'LuaJIT',
- -- Setup your lua path
- path = runtime_path,
- },
- diagnostics = {
- -- Get the language server to recognize the `vim` global
- globals = {'vim'},
- },
- workspace = {
- -- Make the server aware of Neovim runtime files
- library = vim.api.nvim_get_runtime_file("", true),
- },
- -- Do not send telemetry data containing a randomized but unique identifier
- telemetry = {
- enable = false,
- },
- },
- },
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sumneko_lua.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "lua-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "lua" }
- ```
- - `log_level` :
- ```lua
- 2
- ```
- - `root_dir` :
- ```lua
- root_pattern(".luarc.json", ".luacheckrc", ".stylua.toml", "selene.toml", ".git")
- ```
- - `settings` :
- ```lua
- {
- Lua = {
- telemetry = {
- enable = false
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## svelte
-
-https://github.com/sveltejs/language-tools/tree/master/packages/language-server
-
-`svelte-language-server` can be installed via `npm`:
-```sh
-npm install -g svelte-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.svelte.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "svelteserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "svelte" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("package.json", ".git")
- ```
-
-
-## svls
-
-https://github.com/dalance/svls
-
-Language server for verilog and SystemVerilog
-
-`svls` can be installed via `cargo`:
- ```sh
- cargo install svls
- ```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.svls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "svls" }
- ```
- - `filetypes` :
- ```lua
- { "verilog", "systemverilog" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
-
-
-## tailwindcss
-
-https://github.com/tailwindlabs/tailwindcss-intellisense
-
-Tailwind CSS Language Server can be installed via npm:
-```sh
-npm install -g @tailwindcss/language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.tailwindcss.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "tailwindcss-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "aspnetcorerazor", "astro", "astro-markdown", "blade", "django-html", "htmldjango", "edge", "eelixir", "ejs", "erb", "eruby", "gohtml", "haml", "handlebars", "hbs", "html", "html-eex", "heex", "jade", "leaf", "liquid", "markdown", "mdx", "mustache", "njk", "nunjucks", "php", "razor", "slim", "twig", "css", "less", "postcss", "sass", "scss", "stylus", "sugarss", "javascript", "javascriptreact", "reason", "rescript", "typescript", "typescriptreact", "vue", "svelte" }
- ```
- - `init_options` :
- ```lua
- {
- userLanguages = {
- eelixir = "html-eex",
- eruby = "erb"
- }
- }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- root_pattern('tailwind.config.js', 'tailwind.config.ts', 'postcss.config.js', 'postcss.config.ts', 'package.json', 'node_modules', '.git')
- ```
- - `settings` :
- ```lua
- {
- tailwindCSS = {
- classAttributes = { "class", "className", "classList", "ngClass" },
- lint = {
- cssConflict = "warning",
- invalidApply = "error",
- invalidConfigPath = "error",
- invalidScreen = "error",
- invalidTailwindDirective = "error",
- invalidVariant = "error",
- recommendedVariantOrder = "warning"
- },
- validate = true
- }
- }
- ```
-
-
-## taplo
-
-https://taplo.tamasfe.dev/lsp/
-
-Language server for Taplo, a TOML toolkit.
-
-`taplo-cli` can be installed via `cargo`:
-```sh
-cargo install --locked taplo-cli
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.taplo.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "taplo", "lsp", "stdio" }
- ```
- - `filetypes` :
- ```lua
- { "toml" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("*.toml", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## teal_ls
-
-https://github.com/teal-language/teal-language-server
-
-Install with:
-```
-luarocks install --dev teal-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.teal_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "teal-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "teal" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("tlconfig.lua", ".git")
- ```
-
-
-## terraform_lsp
-
-https://github.com/juliosueiras/terraform-lsp
-
-Terraform language server
-Download a released binary from
-https://github.com/juliosueiras/terraform-lsp/releases.
-
-From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp:
-
-Both HashiCorp and the maintainer of terraform-lsp expressed interest in
-collaborating on a language server and are working towards a _long-term_
-goal of a single stable and feature-complete implementation.
-
-For the time being both projects continue to exist, giving users the
-choice:
-
-- `terraform-ls` providing
- - overall stability (by relying only on public APIs)
- - compatibility with any provider and any Terraform >=0.12.0 currently
- less features
- - due to project being younger and relying on public APIs which may
- not offer the same functionality yet
-
-- `terraform-lsp` providing
- - currently more features
- - compatibility with a single particular Terraform (0.12.20 at time of writing)
- - configs designed for other 0.12 versions may work, but interpretation may be inaccurate
- - less stability (due to reliance on Terraform's own internal packages)
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.terraform_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "terraform-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "terraform", "hcl" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".terraform", ".git")
- ```
-
-
-## terraformls
-
-https://github.com/hashicorp/terraform-ls
-
-Terraform language server
-Download a released binary from https://github.com/hashicorp/terraform-ls/releases.
-
-From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp:
-
-Both HashiCorp and the maintainer of terraform-lsp expressed interest in
-collaborating on a language server and are working towards a _long-term_
-goal of a single stable and feature-complete implementation.
-
-For the time being both projects continue to exist, giving users the
-choice:
-
-- `terraform-ls` providing
- - overall stability (by relying only on public APIs)
- - compatibility with any provider and any Terraform >=0.12.0 currently
- less features
- - due to project being younger and relying on public APIs which may
- not offer the same functionality yet
-
-- `terraform-lsp` providing
- - currently more features
- - compatibility with a single particular Terraform (0.12.20 at time of writing)
- - configs designed for other 0.12 versions may work, but interpretation may be inaccurate
- - less stability (due to reliance on Terraform's own internal packages)
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.terraformls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "terraform-ls", "serve" }
- ```
- - `filetypes` :
- ```lua
- { "terraform" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".terraform", ".git")
- ```
-
-
-## texlab
-
-https://github.com/latex-lsp/texlab
-
-A completion engine built from scratch for (La)TeX.
-
-See https://github.com/latex-lsp/texlab/blob/master/docs/options.md for configuration options.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.texlab.setup{}
-```
-**Commands:**
-- TexlabBuild: Build the current buffer
-- TexlabForward: Forward search from current position
-
-**Default values:**
- - `cmd` :
- ```lua
- { "texlab" }
- ```
- - `filetypes` :
- ```lua
- { "tex", "bib" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- texlab = {
- auxDirectory = ".",
- bibtexFormatter = "texlab",
- build = {
- args = { "-pdf", "-interaction=nonstopmode", "-synctex=1", "%f" },
- executable = "latexmk",
- forwardSearchAfter = false,
- onSave = false
- },
- chktex = {
- onEdit = false,
- onOpenAndSave = false
- },
- diagnosticsDelay = 300,
- formatterLineLength = 80,
- forwardSearch = {
- args = {}
- },
- latexFormatter = "latexindent",
- latexindent = {
- modifyLineBreaks = false
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## tflint
-
-https://github.com/terraform-linters/tflint
-
-A pluggable Terraform linter that can act as lsp server.
-Installation instructions can be found in https://github.com/terraform-linters/tflint#installation.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.tflint.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "tflint", "--langserver" }
- ```
- - `filetypes` :
- ```lua
- { "terraform" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".terraform", ".git", ".tflint.hcl")
- ```
-
-
-## theme_check
-
-https://github.com/Shopify/shopify-cli
-
-`theme-check-language-server` is bundled with `shopify-cli` or it can also be installed via
-
-https://github.com/Shopify/theme-check#installation
-
-**NOTE:**
-If installed via Homebrew, `cmd` must be set to 'theme-check-liquid-server'
-
-```lua
-require lspconfig.theme_check.setup {
- cmd = { 'theme-check-liquid-server' }
-}
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.theme_check.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "theme-check-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "liquid" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## tsserver
-
-https://github.com/theia-ide/typescript-language-server
-
-`typescript-language-server` depends on `typescript`. Both packages can be installed via `npm`:
-```sh
-npm install -g typescript typescript-language-server
-```
-
-To configure type language server, add a
-[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or
-[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your
-project.
-
-Here's an example that disables type checking in JavaScript files.
-
-```json
-{
- "compilerOptions": {
- "module": "commonjs",
- "target": "es6",
- "checkJs": false
- },
- "exclude": [
- "node_modules"
- ]
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.tsserver.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "typescript-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" }
- ```
- - `init_options` :
- ```lua
- {
- hostInfo = "neovim"
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git")
- ```
-
-
-## typeprof
-
-https://github.com/ruby/typeprof
-
-`typeprof` is the built-in analysis and LSP tool for Ruby 3.1+.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.typeprof.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "typeprof", "--lsp", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "ruby", "eruby" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Gemfile", ".git")
- ```
-
-
-## vala_ls
-
-https://github.com/Prince781/vala-language-server
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.vala_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vala-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "vala", "genie" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("meson.build", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## vdmj
-
-https://github.com/nickbattle/vdmj
-
-The VDMJ language server can be installed by cloning the VDMJ repository and
-running `mvn clean install`.
-
-Various options are provided to configure the language server (see below). In
-particular:
-- `annotation_paths` is a list of folders and/or jar file paths for annotations
-that should be used with the language server;
-- any value of `debugger_port` less than zero will disable the debugger; note
-that if a non-zero value is used, only one instance of the server can be active
-at a time.
-
-More settings for VDMJ can be changed in a file called `vdmj.properties` under
-`root_dir/.vscode`. For a description of the available settings, see
-[Section 7 of the VDMJ User Guide](https://raw.githubusercontent.com/nickbattle/vdmj/master/vdmj/documentation/UserGuide.pdf).
-
-Note: proof obligations and combinatorial testing are not currently supported
-by neovim.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.vdmj.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- Generated from the options given
- ```
- - `filetypes` :
- ```lua
- { "vdmsl", "vdmpp", "vdmrt" }
- ```
- - `options` :
- ```lua
- {
- annotation_paths = {},
- debugger_port = -1,
- high_precision = false,
- java = "$JAVA_HOME/bin/java",
- java_opts = { "-Xmx3000m", "-Xss1m" },
- logfile = "path.join(vim.fn.stdpath 'cache', 'vdm-lsp.log')",
- mavenrepo = "$HOME/.m2/repository/com/fujitsu",
- version = "The latest version installed in `mavenrepo`"
- }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor(fname) or find_vscode_ancestor(fname)
- ```
-
-
-## verible
-
-https://github.com/chipsalliance/verible
-
-A linter and formatter for verilog and SystemVerilog files.
-
-Release binaries can be downloaded from [here](https://github.com/chipsalliance/verible/releases)
-and placed in a directory on PATH.
-
-See https://github.com/chipsalliance/verible/tree/master/verilog/tools/ls/README.md for options.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.verible.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "verible-verilog-ls" }
- ```
- - `filetypes` :
- ```lua
- { "systemverilog", "verilog" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## vimls
-
-https://github.com/iamcco/vim-language-server
-
-You can install vim-language-server via npm:
-```sh
-npm install -g vim-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.vimls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vim-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "vim" }
- ```
- - `init_options` :
- ```lua
- {
- diagnostic = {
- enable = true
- },
- indexes = {
- count = 3,
- gap = 100,
- projectRootPatterns = { "runtime", "nvim", ".git", "autoload", "plugin" },
- runtimepath = true
- },
- iskeyword = "@,48-57,_,192-255,-#",
- runtimepath = "",
- suggest = {
- fromRuntimepath = true,
- fromVimruntime = true
- },
- vimruntime = ""
- }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## vls
-
-https://github.com/vlang/vls
-
-V language server.
-
-`v-language-server` can be installed by following the instructions [here](https://github.com/vlang/vls#installation).
-
-**By default, v-language-server doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped and compiled v-language-server.
-
-```lua
--- set the path to the vls installation;
-local vls_root_path = vim.fn.stdpath('cache')..'/lspconfig/vls'
-local vls_binary = vls_root_path.."/cmd/vls/vls"
-
-require'lspconfig'.vls.setup {
- cmd = {vls_binary},
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.vls.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "vlang" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("v.mod", ".git")
- ```
-
-
-## volar
-
-https://github.com/johnsoncodehk/volar/tree/master/packages/vue-language-server
-
-Volar language server for Vue
-
-Volar can be installed via npm:
-
-```sh
-npm install -g @volar/vue-language-server
-```
-
-Volar by default supports Vue 3 projects. Vue 2 projects need [additional configuration](https://github.com/johnsoncodehk/volar/blob/master/extensions/vscode-vue-language-features/README.md?plain=1#L28-L63).
-
-**Take Over Mode**
-Volar can serve as a language server for both Vue and TypeScript via [Take Over Mode](https://github.com/johnsoncodehk/volar/discussions/471).
-
-To enable Take Over Mode, override the default filetypes in `setup{}` as follows:
-
-```lua
-require'lspconfig'.volar.setup{
- filetypes = {'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue', 'json'}
-}
-```
-
-**Overriding the default TypeScript Server used by Volar**
-The default config looks for TS in the local node_modules. The alternatives are:
-
-- use a global TypeScript Server installation
-
-```lua
-require'lspconfig'.volar.setup{
- init_options = {
- typescript = {
- serverPath = '/path/to/.npm/lib/node_modules/typescript/lib/tsserverlib.js'
- }
- }
-}
-```
-
-- use a global TypeScript Server installation if a local server is not found
-
-```lua
-local util = require 'lspconfig.util'
-
-local function get_typescript_server_path(root_dir)
- local project_root = util.find_node_modules_ancestor(root_dir)
-
- local local_tsserverlib = project_root ~= nil and util.path.join(project_root, 'node_modules', 'typescript', 'lib', 'tsserverlibrary.js')
- local global_tsserverlib = '/home/[yourusernamehere]/.npm/lib/node_modules/typescript/lib/tsserverlibrary.js'
-
- if local_tsserverlib and util.path.exists(local_tsserverlib) then
- return local_tsserverlib
- else
- return global_tsserverlib
- end
-end
-
-require'lspconfig'.volar.setup{
- on_new_config = function(new_config, new_root_dir)
- new_config.init_options.typescript.serverPath = get_typescript_server_path(new_root_dir)
- end,
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.volar.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vue-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "vue" }
- ```
- - `init_options` :
- ```lua
- {
- documentFeatures = {
- documentColor = false,
- documentFormatting = {
- defaultPrintWidth = 100
- },
- documentSymbol = true,
- foldingRange = true,
- linkedEditingRange = true,
- selectionRange = true
- },
- languageFeatures = {
- callHierarchy = true,
- codeAction = true,
- codeLens = true,
- completion = {
- defaultAttrNameCase = "kebabCase",
- defaultTagNameCase = "both"
- },
- definition = true,
- diagnostics = true,
- documentHighlight = true,
- documentLink = true,
- hover = true,
- implementation = true,
- references = true,
- rename = true,
- renameFileRefactoring = true,
- schemaRequestService = true,
- semanticTokens = false,
- signatureHelp = true,
- typeDefinition = true
- },
- typescript = {
- serverPath = ""
- }
- }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## vuels
-
-https://github.com/vuejs/vetur/tree/master/server
-
-Vue language server(vls)
-`vue-language-server` can be installed via `npm`:
-```sh
-npm install -g vls
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.vuels.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vls" }
- ```
- - `filetypes` :
- ```lua
- { "vue" }
- ```
- - `init_options` :
- ```lua
- {
- config = {
- css = {},
- emmet = {},
- html = {
- suggest = {}
- },
- javascript = {
- format = {}
- },
- stylusSupremacy = {},
- typescript = {
- format = {}
- },
- vetur = {
- completion = {
- autoImport = false,
- tagCasing = "kebab",
- useScaffoldSnippets = false
- },
- format = {
- defaultFormatter = {
- js = "none",
- ts = "none"
- },
- defaultFormatterOptions = {},
- scriptInitialIndent = false,
- styleInitialIndent = false
- },
- useWorkspaceDependencies = false,
- validation = {
- script = true,
- style = true,
- template = true
- }
- }
- }
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("package.json", "vue.config.js")
- ```
-
-
-## yamlls
-
-https://github.com/redhat-developer/yaml-language-server
-
-`yaml-language-server` can be installed via `yarn`:
-```sh
-yarn global add yaml-language-server
-```
-
-To use a schema for validation, there are two options:
-
-1. Add a modeline to the file. A modeline is a comment of the form:
-
-```
-# yaml-language-server: $schema=<urlToTheSchema|relativeFilePath|absoluteFilePath}>
-```
-
-where the relative filepath is the path relative to the open yaml file, and the absolute filepath
-is the filepath relative to the filesystem root ('/' on unix systems)
-
-2. Associated a schema url, relative , or absolute (to root of project, not to filesystem root) path to
-the a glob pattern relative to the detected project root. Check `:LspInfo` to determine the resolved project
-root.
-
-```lua
-require('lspconfig').yamlls.setup {
- ... -- other configuration for setup {}
- settings = {
- yaml = {
- ... -- other settings. note this overrides the lspconfig defaults.
- schemas = {
- ["https://json.schemastore.org/github-workflow.json"] = "/.github/workflows/*"
- ["../path/relative/to/file.yml"] = "/.github/workflows/*"
- ["/path/from/root/of/project"] = "/.github/workflows/*"
- },
- },
- }
-}
-```
-
-Currently, kubernetes is special-cased in yammls, see the following upstream issues:
-* [#211](https://github.com/redhat-developer/yaml-language-server/issues/211).
-* [#307](https://github.com/redhat-developer/yaml-language-server/issues/307).
-
-To override a schema to use a specific k8s schema version (for example, to use 1.18):
-
-```lua
-require('lspconfig').yamlls.setup {
- ... -- other configuration for setup {}
- settings = {
- yaml = {
- ... -- other settings. note this overrides the lspconfig defaults.
- schemas = {
- ["https://raw.githubusercontent.com/instrumenta/kubernetes-json-schema/master/v1.18.0-standalone-strict/all.json"] = "/*.k8s.yaml",
- ... -- other schemas
- },
- },
- }
-}
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.yamlls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "yaml-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "yaml", "yaml.docker-compose" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `settings` :
- ```lua
- {
- redhat = {
- telemetry = {
- enabled = false
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## zeta_note
-
-https://github.com/artempyanykh/zeta-note
-
-Markdown LSP server for easy note-taking with cross-references and diagnostics.
-
-Binaries can be downloaded from https://github.com/artempyanykh/zeta-note/releases
-
-**By default, zeta-note doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your zeta-note binary.
-
-```lua
-require'lspconfig'.zeta_note.setup{
- cmd = {'path/to/zeta-note'}
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.zeta_note.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "markdown" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".zeta.toml")
- ```
-
-
-## zk
-
-github.com/mickael-menu/zk
-
-A plain text note-taking assistant
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.zk.setup{}
-```
-**Commands:**
-- ZkIndex: Index
-- ZkNew: ZkNew
-
-**Default values:**
- - `cmd` :
- ```lua
- { "zk", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "markdown" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".zk")
- ```
-
-
-## zls
-
-https://github.com/zigtools/zls
-
-Zig LSP implementation + Zig Language Server
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.zls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "zls" }
- ```
- - `filetypes` :
- ```lua
- { "zig", "zir" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("zls.json", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-
-vim:ft=markdown
diff --git a/start/lspconfig-0.1.3/doc/server_configurations.txt b/start/lspconfig-0.1.3/doc/server_configurations.txt
deleted file mode 100644
index 426c422..0000000
--- a/start/lspconfig-0.1.3/doc/server_configurations.txt
+++ /dev/null
@@ -1,6554 +0,0 @@
-# Configurations
-<!-- *lspconfig-server-configurations* -->
-
-The following LSP configs are included. This documentation is autogenerated from the lua files. Follow a link to find documentation for
-that config. This file is accessible in neovim via `:help lspconfig-server-configurations`
-
-- [als](#als)
-- [angularls](#angularls)
-- [ansiblels](#ansiblels)
-- [arduino_language_server](#arduino_language_server)
-- [asm_lsp](#asm_lsp)
-- [awk_ls](#awk_ls)
-- [bashls](#bashls)
-- [beancount](#beancount)
-- [bicep](#bicep)
-- [bsl_ls](#bsl_ls)
-- [ccls](#ccls)
-- [clangd](#clangd)
-- [clarity_lsp](#clarity_lsp)
-- [clojure_lsp](#clojure_lsp)
-- [cmake](#cmake)
-- [codeqlls](#codeqlls)
-- [crystalline](#crystalline)
-- [csharp_ls](#csharp_ls)
-- [cssls](#cssls)
-- [cssmodules_ls](#cssmodules_ls)
-- [cucumber_language_server](#cucumber_language_server)
-- [dartls](#dartls)
-- [denols](#denols)
-- [dhall_lsp_server](#dhall_lsp_server)
-- [diagnosticls](#diagnosticls)
-- [dockerls](#dockerls)
-- [dotls](#dotls)
-- [efm](#efm)
-- [elixirls](#elixirls)
-- [elmls](#elmls)
-- [ember](#ember)
-- [emmet_ls](#emmet_ls)
-- [erlangls](#erlangls)
-- [esbonio](#esbonio)
-- [eslint](#eslint)
-- [flow](#flow)
-- [flux_lsp](#flux_lsp)
-- [foam_ls](#foam_ls)
-- [fortls](#fortls)
-- [fsautocomplete](#fsautocomplete)
-- [fstar](#fstar)
-- [gdscript](#gdscript)
-- [ghcide](#ghcide)
-- [golangci_lint_ls](#golangci_lint_ls)
-- [gopls](#gopls)
-- [gradle_ls](#gradle_ls)
-- [grammarly](#grammarly)
-- [graphql](#graphql)
-- [groovyls](#groovyls)
-- [haxe_language_server](#haxe_language_server)
-- [hdl_checker](#hdl_checker)
-- [hhvm](#hhvm)
-- [hie](#hie)
-- [hls](#hls)
-- [hoon_ls](#hoon_ls)
-- [html](#html)
-- [idris2_lsp](#idris2_lsp)
-- [intelephense](#intelephense)
-- [java_language_server](#java_language_server)
-- [jdtls](#jdtls)
-- [jedi_language_server](#jedi_language_server)
-- [jsonls](#jsonls)
-- [jsonnet_ls](#jsonnet_ls)
-- [julials](#julials)
-- [kotlin_language_server](#kotlin_language_server)
-- [lean3ls](#lean3ls)
-- [leanls](#leanls)
-- [lelwel_ls](#lelwel_ls)
-- [lemminx](#lemminx)
-- [ltex](#ltex)
-- [metals](#metals)
-- [mint](#mint)
-- [mm0_ls](#mm0_ls)
-- [nickel_ls](#nickel_ls)
-- [nimls](#nimls)
-- [ocamlls](#ocamlls)
-- [ocamllsp](#ocamllsp)
-- [ols](#ols)
-- [omnisharp](#omnisharp)
-- [opencl_ls](#opencl_ls)
-- [openscad_ls](#openscad_ls)
-- [pasls](#pasls)
-- [perlls](#perlls)
-- [perlnavigator](#perlnavigator)
-- [perlpls](#perlpls)
-- [phpactor](#phpactor)
-- [please](#please)
-- [powershell_es](#powershell_es)
-- [prismals](#prismals)
-- [prosemd_lsp](#prosemd_lsp)
-- [psalm](#psalm)
-- [puppet](#puppet)
-- [purescriptls](#purescriptls)
-- [pylsp](#pylsp)
-- [pyre](#pyre)
-- [pyright](#pyright)
-- [quick_lint_js](#quick_lint_js)
-- [r_language_server](#r_language_server)
-- [racket_langserver](#racket_langserver)
-- [reason_ls](#reason_ls)
-- [remark_ls](#remark_ls)
-- [rescriptls](#rescriptls)
-- [rls](#rls)
-- [rnix](#rnix)
-- [robotframework_ls](#robotframework_ls)
-- [rome](#rome)
-- [rust_analyzer](#rust_analyzer)
-- [salt_ls](#salt_ls)
-- [scry](#scry)
-- [serve_d](#serve_d)
-- [sixtyfps](#sixtyfps)
-- [slint_lsp](#slint_lsp)
-- [solang](#solang)
-- [solargraph](#solargraph)
-- [solc](#solc)
-- [solidity_ls](#solidity_ls)
-- [sorbet](#sorbet)
-- [sourcekit](#sourcekit)
-- [sourcery](#sourcery)
-- [spectral](#spectral)
-- [sqlls](#sqlls)
-- [sqls](#sqls)
-- [stylelint_lsp](#stylelint_lsp)
-- [sumneko_lua](#sumneko_lua)
-- [svelte](#svelte)
-- [svls](#svls)
-- [tailwindcss](#tailwindcss)
-- [taplo](#taplo)
-- [teal_ls](#teal_ls)
-- [terraform_lsp](#terraform_lsp)
-- [terraformls](#terraformls)
-- [texlab](#texlab)
-- [tflint](#tflint)
-- [theme_check](#theme_check)
-- [tsserver](#tsserver)
-- [typeprof](#typeprof)
-- [vala_ls](#vala_ls)
-- [vdmj](#vdmj)
-- [verible](#verible)
-- [vimls](#vimls)
-- [vls](#vls)
-- [volar](#volar)
-- [vuels](#vuels)
-- [yamlls](#yamlls)
-- [zeta_note](#zeta_note)
-- [zk](#zk)
-- [zls](#zls)
-
-## als
-
-https://github.com/AdaCore/ada_language_server
-
-Installation instructions can be found [here](https://github.com/AdaCore/ada_language_server#Install).
-
-Can be configured by passing a "settings" object to `als.setup{}`:
-
-```lua
-require('lspconfig').als.setup{
- settings = {
- ada = {
- projectFile = "project.gpr";
- scenarioVariables = { ... };
- }
- }
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.als.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ada_language_server" }
- ```
- - `filetypes` :
- ```lua
- { "ada" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("Makefile", ".git", "*.gpr", "*.adc")
- ```
-
-
-## angularls
-
-https://github.com/angular/vscode-ng-language-service
-
-`angular-language-server` can be installed via npm `npm install -g @angular/language-server`.
-
-Note, that if you override the default `cmd`, you must also update `on_new_config` to set `new_config.cmd` during startup.
-
-```lua
-local project_library_path = "/path/to/project/lib"
-local cmd = {"ngserver", "--stdio", "--tsProbeLocations", project_library_path , "--ngProbeLocations", project_library_path}
-
-require'lspconfig'.angularls.setup{
- cmd = cmd,
- on_new_config = function(new_config,new_root_dir)
- new_config.cmd = cmd
- end,
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.angularls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ngserver", "--stdio", "--tsProbeLocations", "", "--ngProbeLocations", "" }
- ```
- - `filetypes` :
- ```lua
- { "typescript", "html", "typescriptreact", "typescript.tsx" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("angular.json", ".git")
- ```
-
-
-## ansiblels
-
-https://github.com/ansible/ansible-language-server
-
-Language server for the ansible configuration management tool.
-
-`ansible-language-server` can be installed via `npm`:
-
-```sh
-npm install -g @ansible/ansible-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ansiblels.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ansible-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "yaml.ansible" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- ansible = {
- ansible = {
- path = "ansible"
- },
- ansibleLint = {
- enabled = true,
- path = "ansible-lint"
- },
- executionEnvironment = {
- enabled = false
- },
- python = {
- interpreterPath = "python"
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## arduino_language_server
-
-https://github.com/arduino/arduino-language-server
-
-Language server for Arduino
-
-The `arduino-language-server` can be installed by running:
- go get -u github.com/arduino/arduino-language-server
-
-The `arduino-cli` tools must also be installed. Follow these instructions for your distro:
- https://arduino.github.io/arduino-cli/latest/installation/
-
-After installing the `arduino-cli` tools, follow these instructions for generating
-a configuration file:
- https://arduino.github.io/arduino-cli/latest/getting-started/#create-a-configuration-file
-and make sure you install any relevant platforms libraries:
- https://arduino.github.io/arduino-cli/latest/getting-started/#install-the-core-for-your-board
-
-The language server also requires `clangd` be installed. It will look for `clangd` by default but
-the binary path can be overridden if need be.
-
-After all dependencies are installed you'll need to override the lspconfig command for the
-language server in your setup function with the necessary configurations:
-
-```lua
-lspconfig.arduino_language_server.setup({
- cmd = {
- -- Required
- "arduino-language-server",
- "-cli-config", "/path/to/arduino-cli.yaml",
- -- Optional
- "-cli", "/path/to/arduino-cli",
- "-clangd", "/path/to/clangd"
- }
-})
-```
-
-For further instruction about configuration options, run `arduino-language-server --help`.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.arduino_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "arduino-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "arduino" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## asm_lsp
-
-https://github.com/bergercookie/asm-lsp
-
-Language Server for GAS/GO Assembly
-
-`asm-lsp` can be installed via cargo:
-cargo install asm-lsp
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.asm_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "asm-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "asm", "vmasm" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## awk_ls
-
-https://github.com/Beaglefoot/awk-language-server/
-
-`awk-language-server` can be installed via `npm`:
-```sh
-npm install -g awk-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.awk_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "awk-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "awk" }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## bashls
-
-https://github.com/mads-hartmann/bash-language-server
-
-`bash-language-server` can be installed via `npm`:
-```sh
-npm i -g bash-language-server
-```
-
-Language server for bash, written using tree sitter in typescript.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.bashls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "bash-language-server", "start" }
- ```
- - `cmd_env` :
- ```lua
- {
- GLOB_PATTERN = "*@(.sh|.inc|.bash|.command)"
- }
- ```
- - `filetypes` :
- ```lua
- { "sh" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## beancount
-
-https://github.com/polarmutex/beancount-language-server#installation
-
-See https://github.com/polarmutex/beancount-language-server#configuration for configuration options
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.beancount.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "beancount-langserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "beancount" }
- ```
- - `init_options` :
- ```lua
- {
- journalFile = "",
- pythonPath = "python3"
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("elm.json")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## bicep
-
-https://github.com/azure/bicep
-Bicep language server
-
-Bicep language server can be installed by downloading and extracting a release of bicep-langserver.zip from [Bicep GitHub releases](https://github.com/Azure/bicep/releases).
-
-Bicep language server requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed.
-
-Neovim does not have built-in support for the bicep filetype which is required for lspconfig to automatically launch the language server.
-
-Filetype detection can be added via an autocmd:
-```lua
-vim.cmd [[ autocmd BufNewFile,BufRead *.bicep set filetype=bicep ]]
-```
-
-**By default, bicep language server does not have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary.
-
-```lua
-local bicep_lsp_bin = "/path/to/bicep-langserver/Bicep.LangServer.dll"
-require'lspconfig'.bicep.setup{
- cmd = { "dotnet", bicep_lsp_bin };
- ...
-}
-```
-
-To download the latest release and place in /usr/local/bin/bicep-langserver:
-```bash
-(cd $(mktemp -d) \
- && curl -fLO https://github.com/Azure/bicep/releases/latest/download/bicep-langserver.zip \
- && rm -rf /usr/local/bin/bicep-langserver \
- && unzip -d /usr/local/bin/bicep-langserver bicep-langserver.zip)
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.bicep.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "bicep" }
- ```
- - `init_options` :
- ```lua
- {}
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
-
-
-## bsl_ls
-
- https://github.com/1c-syntax/bsl-language-server
-
- Language Server Protocol implementation for 1C (BSL) - 1C:Enterprise 8 and OneScript languages.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.bsl_ls.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "bsl", "os" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git")
- ```
-
-
-## ccls
-
-https://github.com/MaskRay/ccls/wiki
-
-ccls relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified
-as compile_commands.json or, for simpler projects, a .ccls.
-For details on how to automatically generate one using CMake look [here](https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html). Alternatively, you can use [Bear](https://github.com/rizsotto/Bear).
-
-Customization options are passed to ccls at initialization time via init_options, a list of available options can be found [here](https://github.com/MaskRay/ccls/wiki/Customization#initialization-options). For example:
-
-```lua
-local lspconfig = require'lspconfig'
-lspconfig.ccls.setup {
- init_options = {
- compilationDatabaseDirectory = "build";
- index = {
- threads = 0;
- };
- clang = {
- excludeArgs = { "-frounding-math"} ;
- };
- }
-}
-
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ccls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ccls" }
- ```
- - `filetypes` :
- ```lua
- { "c", "cpp", "objc", "objcpp" }
- ```
- - `offset_encoding` :
- ```lua
- "utf-32"
- ```
- - `root_dir` :
- ```lua
- root_pattern("compile_commands.json", ".ccls", ".git")
- ```
- - `single_file_support` :
- ```lua
- false
- ```
-
-
-## clangd
-
-https://clangd.llvm.org/installation.html
-
-**NOTE:** Clang >= 11 is recommended! See [this issue for more](https://github.com/neovim/nvim-lsp/issues/23).
-
-clangd relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified as compile_commands.json, see https://clangd.llvm.org/installation#compile_commandsjson
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.clangd.setup{}
-```
-**Commands:**
-- ClangdSwitchSourceHeader: Switch between source/header
-
-**Default values:**
- - `capabilities` :
- ```lua
- default capabilities, with offsetEncoding utf-8
- ```
- - `cmd` :
- ```lua
- { "clangd" }
- ```
- - `filetypes` :
- ```lua
- { "c", "cpp", "objc", "objcpp" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(
- '.clangd',
- '.clang-tidy',
- '.clang-format',
- 'compile_commands.json',
- 'compile_flags.txt',
- 'configure.ac',
- '.git'
- )
-
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## clarity_lsp
-
-`clarity-lsp` is a language server for the Clarity language. Clarity is a decidable smart contract language that optimizes for predictability and security. Smart contracts allow developers to encode essential business logic on a blockchain.
-
-To learn how to configure the clarity language server, see the [clarity-lsp documentation](https://github.com/hirosystems/clarity-lsp).
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.clarity_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "clarity-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "clar", "clarity" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git")
- ```
-
-
-## clojure_lsp
-
-https://github.com/snoe/clojure-lsp
-
-Clojure Language Server
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.clojure_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "clojure-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "clojure", "edn" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("project.clj", "deps.edn", "build.boot", "shadow-cljs.edn", ".git")
- ```
-
-
-## cmake
-
-https://github.com/regen100/cmake-language-server
-
-CMake LSP Implementation
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.cmake.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "cmake-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "cmake" }
- ```
- - `init_options` :
- ```lua
- {
- buildDirectory = "build"
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git", "compile_commands.json", "build")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## codeqlls
-
-Reference:
-https://help.semmle.com/codeql/codeql-cli.html
-
-Binaries:
-https://github.com/github/codeql-cli-binaries
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.codeqlls.setup{}
-```
-
-
-**Default values:**
- - `before_init` :
- ```lua
- see source file
- ```
- - `cmd` :
- ```lua
- { "codeql", "execute", "language-server", "--check-errors", "ON_CHANGE", "-q" }
- ```
- - `filetypes` :
- ```lua
- { "ql" }
- ```
- - `log_level` :
- ```lua
- 2
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- search_path = "list containing all search paths, eg: '~/codeql-home/codeql-repo'"
- }
- ```
-
-
-## crystalline
-
-https://github.com/elbywan/crystalline
-
-Crystal language server.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.crystalline.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "crystalline" }
- ```
- - `filetypes` :
- ```lua
- { "crystal" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('shard.yml', '.git')
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## csharp_ls
-
-https://github.com/razzmatazz/csharp-language-server
-
-Language Server for C#.
-
-csharp-ls requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed.
-
-The preferred way to install csharp-ls is with `dotnet tool install --global csharp-ls`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.csharp_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "csharp-ls" }
- ```
- - `filetypes` :
- ```lua
- { "cs" }
- ```
- - `init_options` :
- ```lua
- {
- AutomaticWorkspaceInit = true
- }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## cssls
-
-
-https://github.com/hrsh7th/vscode-langservers-extracted
-
-`css-languageserver` can be installed via `npm`:
-
-```sh
-npm i -g vscode-langservers-extracted
-```
-
-Neovim does not currently include built-in snippets. `vscode-css-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup.
-
-```lua
---Enable (broadcasting) snippet capability for completion
-local capabilities = vim.lsp.protocol.make_client_capabilities()
-capabilities.textDocument.completion.completionItem.snippetSupport = true
-
-require'lspconfig'.cssls.setup {
- capabilities = capabilities,
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.cssls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vscode-css-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "css", "scss", "less" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("package.json", ".git") or bufdir
- ```
- - `settings` :
- ```lua
- {
- css = {
- validate = true
- },
- less = {
- validate = true
- },
- scss = {
- validate = true
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## cssmodules_ls
-
-https://github.com/antonk52/cssmodules-language-server
-
-Language server for autocompletion and go-to-definition functionality for CSS modules.
-
-You can install cssmodules-language-server via npm:
-```sh
-npm install -g cssmodules-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.cssmodules_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "cssmodules-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "typescript", "typescriptreact" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("package.json")
- ```
-
-
-## cucumber_language_server
-
-https://cucumber.io
-https://github.com/cucumber/common
-https://www.npmjs.com/package/@cucumber/language-server
-
-Language server for Cucumber.
-
-`cucumber-language-server` can be installed via `npm`:
-```sh
-npm install -g @cucumber/language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.cucumber_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "cucumber-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "cucumber" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
-
-
-## dartls
-
-https://github.com/dart-lang/sdk/tree/master/pkg/analysis_server/tool/lsp_spec
-
-Language server for dart.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.dartls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "dart", "./snapshots/analysis_server.dart.snapshot", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "dart" }
- ```
- - `init_options` :
- ```lua
- {
- closingLabels = true,
- flutterOutline = true,
- onlyAnalyzeProjectsWithOpenFiles = true,
- outline = true,
- suggestFromUnimportedLibraries = true
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("pubspec.yaml")
- ```
- - `settings` :
- ```lua
- {
- dart = {
- completeFunctionCalls = true,
- showTodos = true
- }
- }
- ```
-
-
-## denols
-
-https://github.com/denoland/deno
-
-Deno's built-in language server
-
-To approrpiately highlight codefences returned from denols, you will need to augment vim.g.markdown_fenced languages
- in your init.lua. Example:
-
-```lua
-vim.g.markdown_fenced_languages = {
- "ts=typescript"
-}
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.denols.setup{}
-```
-**Commands:**
-- DenolsCache: Cache a module and all of its dependencies.
-
-**Default values:**
- - `cmd` :
- ```lua
- { "deno", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" }
- ```
- - `handlers` :
- ```lua
- {
- ["textDocument/definition"] = <function 1>,
- ["textDocument/references"] = <function 1>
- }
- ```
- - `init_options` :
- ```lua
- {
- enable = true,
- lint = false,
- unstable = false
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("deno.json", "deno.jsonc", "tsconfig.json", ".git")
- ```
-
-
-## dhall_lsp_server
-
-https://github.com/dhall-lang/dhall-haskell/tree/master/dhall-lsp-server
-
-language server for dhall
-
-`dhall-lsp-server` can be installed via cabal:
-```sh
-cabal install dhall-lsp-server
-```
-prebuilt binaries can be found [here](https://github.com/dhall-lang/dhall-haskell/releases).
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.dhall_lsp_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "dhall-lsp-server" }
- ```
- - `filetypes` :
- ```lua
- { "dhall" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## diagnosticls
-
-https://github.com/iamcco/diagnostic-languageserver
-
-Diagnostic language server integrate with linters.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.diagnosticls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "diagnostic-languageserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- Empty by default, override to add filetypes
- ```
- - `root_dir` :
- ```lua
- Vim's starting directory
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## dockerls
-
-https://github.com/rcjsuen/dockerfile-language-server-nodejs
-
-`docker-langserver` can be installed via `npm`:
-```sh
-npm install -g dockerfile-language-server-nodejs
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.dockerls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "docker-langserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "dockerfile" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Dockerfile")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## dotls
-
-https://github.com/nikeee/dot-language-server
-
-`dot-language-server` can be installed via `npm`:
-```sh
-npm install -g dot-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.dotls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "dot-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "dot" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## efm
-
-https://github.com/mattn/efm-langserver
-
-General purpose Language Server that can use specified error message format generated from specified command.
-
-Requires at minimum EFM version [v0.0.38](https://github.com/mattn/efm-langserver/releases/tag/v0.0.38) to support
-launching the language server on single files. If on an older version of EFM, disable single file support:
-
-```lua
-require('lspconfig')['efm'].setup{
- settings = ..., -- You must populate this according to the EFM readme
- filetypes = ..., -- Populate this according to the note below
- single_file_support = false, -- This is the important line for supporting older version of EFM
-}
-```
-
-Note: In order for neovim's built-in language server client to send the appropriate `languageId` to EFM, **you must
-specify `filetypes` in your call to `setup{}`**. Otherwise `lspconfig` will launch EFM on the `BufEnter` instead
-of the `FileType` autocommand, and the `filetype` variable used to populate the `languageId` will not yet be set.
-
-```lua
-require('lspconfig')['efm'].setup{
- settings = ..., -- You must populate this according to the EFM readme
- filetypes = { 'python','cpp','lua' }
-}
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.efm.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "efm-langserver" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern(".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## elixirls
-
-https://github.com/elixir-lsp/elixir-ls
-
-`elixir-ls` can be installed by following the instructions [here](https://github.com/elixir-lsp/elixir-ls#building-and-running).
-
-```bash
-curl -fLO https://github.com/elixir-lsp/elixir-ls/releases/latest/download/elixir-ls.zip
-unzip elixir-ls.zip -d /path/to/elixir-ls
-# Unix
-chmod +x /path/to/elixir-ls/language_server.sh
-```
-
-**By default, elixir-ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped elixir-ls.
-
-```lua
-require'lspconfig'.elixirls.setup{
- -- Unix
- cmd = { "/path/to/elixir-ls/language_server.sh" };
- -- Windows
- cmd = { "/path/to/elixir-ls/language_server.bat" };
- ...
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.elixirls.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "elixir", "eelixir" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("mix.exs", ".git") or vim.loop.os_homedir()
- ```
-
-
-## elmls
-
-https://github.com/elm-tooling/elm-language-server#installation
-
-If you don't want to use Nvim to install it, then you can use:
-```sh
-npm install -g elm elm-test elm-format @elm-tooling/elm-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.elmls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "elm-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "elm" }
- ```
- - `init_options` :
- ```lua
- {
- elmAnalyseTrigger = "change"
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("elm.json")
- ```
-
-
-## ember
-
-https://github.com/lifeart/ember-language-server
-
-`ember-language-server` can be installed via `npm`:
-
-```sh
-npm install -g @lifeart/ember-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ember.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ember-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "handlebars", "typescript", "javascript" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("ember-cli-build.js", ".git")
- ```
-
-
-## emmet_ls
-
-https://github.com/aca/emmet-ls
-
-Package can be installed via `npm`:
-```sh
-npm install -g emmet-ls
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.emmet_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "emmet-ls", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "html", "css" }
- ```
- - `root_dir` :
- ```lua
- git root
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## erlangls
-
-https://erlang-ls.github.io
-
-Language Server for Erlang.
-
-Clone [erlang_ls](https://github.com/erlang-ls/erlang_ls)
-Compile the project with `make` and copy resulting binaries somewhere in your $PATH eg. `cp _build/*/bin/* ~/local/bin`
-
-Installation instruction can be found [here](https://github.com/erlang-ls/erlang_ls).
-
-Installation requirements:
- - [Erlang OTP 21+](https://github.com/erlang/otp)
- - [rebar3 3.9.1+](https://github.com/erlang/rebar3)
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.erlangls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "erlang_ls" }
- ```
- - `filetypes` :
- ```lua
- { "erlang" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('rebar.config', 'erlang.mk', '.git')
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## esbonio
-
-https://github.com/swyddfa/esbonio
-
-Esbonio is a language server for [Sphinx](https://www.sphinx-doc.org/en/master/) documentation projects.
-The language server can be installed via pip
-
-```
-pip install esbonio
-```
-
-Since Sphinx is highly extensible you will get best results if you install the language server in the same
-Python environment as the one used to build your documentation. To ensure that the correct Python environment
-is picked up, you can either launch `nvim` with the correct environment activated.
-
-```
-source env/bin/activate
-nvim
-```
-
-Or you can modify the default `cmd` to include the full path to the Python interpreter.
-
-```lua
-require'lspconfig'.esbonio.setup {
- cmd = { '/path/to/virtualenv/bin/python', '-m', 'esbonio' }
-}
-```
-
-Esbonio supports a number of config values passed as `init_options` on startup, for example.
-
-```lua
-require'lspconfig'.esbonio.setup {
- init_options = {
- server = {
- logLevel = "debug"
- },
- sphinx = {
- confDir = "/path/to/docs",
- srcDir = "${confDir}/../docs-src"
- }
-}
-```
-
-A full list and explanation of the available options can be found [here](https://swyddfa.github.io/esbonio/docs/lsp/editors/index.html)
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.esbonio.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "python3", "-m", "esbonio" }
- ```
- - `filetypes` :
- ```lua
- { "rst" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## eslint
-
-https://github.com/hrsh7th/vscode-langservers-extracted
-
-vscode-eslint-language-server: A linting engine for JavaScript / Typescript
-
-`vscode-eslint-language-server` can be installed via `npm`:
-```sh
-npm i -g vscode-langservers-extracted
-```
-
-vscode-eslint-language-server provides an EslintFixAll command that can be used to format document on save
-```vim
-autocmd BufWritePre *.tsx,*.ts,*.jsx,*.js EslintFixAll
-```
-
-See [vscode-eslint](https://github.com/microsoft/vscode-eslint/blob/55871979d7af184bf09af491b6ea35ebd56822cf/server/src/eslintServer.ts#L216-L229) for configuration options.
-
-Additional messages you can handle: eslint/noConfig
-Messages already handled in lspconfig: eslint/openDoc, eslint/confirmESLintExecution, eslint/probeFailed, eslint/noLibrary
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.eslint.setup{}
-```
-**Commands:**
-- EslintFixAll: Fix all eslint problems for this buffer
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vscode-eslint-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx", "vue" }
- ```
- - `handlers` :
- ```lua
- {
- ["eslint/confirmESLintExecution"] = <function 1>,
- ["eslint/noLibrary"] = <function 2>,
- ["eslint/openDoc"] = <function 3>,
- ["eslint/probeFailed"] = <function 4>
- }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- codeAction = {
- disableRuleComment = {
- enable = true,
- location = "separateLine"
- },
- showDocumentation = {
- enable = true
- }
- },
- codeActionOnSave = {
- enable = false,
- mode = "all"
- },
- format = true,
- nodePath = "",
- onIgnoredFiles = "off",
- packageManager = "npm",
- quiet = false,
- rulesCustomizations = {},
- run = "onType",
- useESLintClass = false,
- validate = "on",
- workingDirectory = {
- mode = "location"
- }
- }
- ```
-
-
-## flow
-
-https://flow.org/
-https://github.com/facebook/flow
-
-See below for how to setup Flow itself.
-https://flow.org/en/docs/install/
-
-See below for lsp command options.
-
-```sh
-npx flow lsp --help
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.flow.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "npx", "--no-install", "flow", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "javascript.jsx" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".flowconfig")
- ```
-
-
-## flux_lsp
-
-https://github.com/influxdata/flux-lsp
-`flux-lsp` can be installed via `cargo`:
-```sh
-cargo install --git https://github.com/influxdata/flux-lsp
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.flux_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "flux-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "flux" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## foam_ls
-
-https://github.com/FoamScience/foam-language-server
-
-`foam-language-server` can be installed via `npm`
-```sh
-npm install -g foam-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.foam_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "foam-ls", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "foam", "OpenFOAM" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## fortls
-
-https://github.com/hansec/fortran-language-server
-
-Fortran Language Server for the Language Server Protocol
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.fortls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "fortls" }
- ```
- - `filetypes` :
- ```lua
- { "fortran" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".fortls")
- ```
- - `settings` :
- ```lua
- {
- nthreads = 1
- }
- ```
-
-
-## fsautocomplete
-
-https://github.com/fsharp/FsAutoComplete
-
-Language Server for F# provided by FsAutoComplete (FSAC).
-
-FsAutoComplete requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed.
-
-The preferred way to install FsAutoComplete is with `dotnet tool install --global fsautocomplete`.
-
-Instructions to compile from source are found on the main [repository](https://github.com/fsharp/FsAutoComplete).
-
-You may also need to configure the filetype as Vim defaults to Forth for `*.fs` files:
-
-`autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp`
-
-This is automatically done by plugins such as [PhilT/vim-fsharp](https://github.com/PhilT/vim-fsharp), [fsharp/vim-fsharp](https://github.com/fsharp/vim-fsharp), and [adelarsq/neofsharp.vim](https://github.com/adelarsq/neofsharp.vim).
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.fsautocomplete.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "fsautocomplete", "--background-service-enabled" }
- ```
- - `filetypes` :
- ```lua
- { "fsharp" }
- ```
- - `init_options` :
- ```lua
- {
- AutomaticWorkspaceInit = true
- }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## fstar
-
-https://github.com/FStarLang/FStar
-
-LSP support is included in FStar. Make sure `fstar.exe` is in your PATH.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.fstar.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "fstar.exe", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "fstar" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
-
-
-## gdscript
-
-https://github.com/godotengine/godot
-
-Language server for GDScript, used by Godot Engine.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.gdscript.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "nc", "localhost", "6008" }
- ```
- - `filetypes` :
- ```lua
- { "gd", "gdscript", "gdscript3" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("project.godot", ".git")
- ```
-
-
-## ghcide
-
-https://github.com/digital-asset/ghcide
-
-A library for building Haskell IDE tooling.
-"ghcide" isn't for end users now. Use "haskell-language-server" instead of "ghcide".
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ghcide.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ghcide", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "haskell", "lhaskell" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("stack.yaml", "hie-bios", "BUILD.bazel", "cabal.config", "package.yaml")
- ```
-
-
-## golangci_lint_ls
-
-Combination of both lint server and client
-
-https://github.com/nametake/golangci-lint-langserver
-https://github.com/golangci/golangci-lint
-
-
-Installation of binaries needed is done via
-
-```
-go install github.com/nametake/golangci-lint-langserver@latest
-go install github.com/golangci/golangci-lint/cmd/golangci-lint@v1.42.1
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.golangci_lint_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "golangci-lint-langserver" }
- ```
- - `filetypes` :
- ```lua
- { "go", "gomod" }
- ```
- - `init_options` :
- ```lua
- {
- command = { "golangci-lint", "run", "--out-format", "json" }
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern('go.work') or root_pattern('go.mod', '.golangci.yaml', '.git')
- ```
-
-
-## gopls
-
-https://github.com/golang/tools/tree/master/gopls
-
-Google's lsp server for golang.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.gopls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "gopls" }
- ```
- - `filetypes` :
- ```lua
- { "go", "gomod", "gotmpl" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("go.mod", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## gradle_ls
-
-https://github.com/microsoft/vscode-gradle
-
-Microsoft's lsp server for gradle files
-
-If you're setting this up manually, build vscode-gradle using `./gradlew installDist` and point `cmd` to the `gradle-language-server` generated in the build directory
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.gradle_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "gradle-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "groovy" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("settings.gradle")
- ```
-
-
-## grammarly
-
-https://github.com/emacs-grammarly/unofficial-grammarly-language-server
-
-`unofficial-grammarly-language-server` can be installed via `npm`:
-
-```sh
-npm i -g @emacs-grammarly/unofficial-grammarly-language-server
-```
-
-WARNING: Since this language server uses Grammarly's API, any document you open with it running is shared with them. Please evaluate their [privacy policy](https://www.grammarly.com/privacy-policy) before using this.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.grammarly.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "unofficial-grammarly-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "markdown" }
- ```
- - `handlers` :
- ```lua
- {
- ["$/updateDocumentState"] = <function 1>
- }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## graphql
-
-https://github.com/graphql/graphiql/tree/main/packages/graphql-language-service-cli
-
-`graphql-lsp` can be installed via `npm`:
-
-```sh
-npm install -g graphql-language-service-cli
-```
-
-Note that you must also have [the graphql package](https://github.com/graphql/graphql-js) installed and create a [GraphQL config file](https://www.graphql-config.com/docs/user/user-introduction).
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.graphql.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "graphql-lsp", "server", "-m", "stream" }
- ```
- - `filetypes` :
- ```lua
- { "graphql", "typescriptreact", "javascriptreact" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('.git', '.graphqlrc*', '.graphql.config.*')
- ```
-
-
-## groovyls
-
-https://github.com/prominic/groovy-language-server.git
-
-Requirements:
- - Linux/macOS (for now)
- - Java 11+
-
-`groovyls` can be installed by following the instructions [here](https://github.com/prominic/groovy-language-server.git#build).
-
-If you have installed groovy language server, you can set the `cmd` custom path as follow:
-
-```lua
-require'lspconfig'.groovyls.setup{
- -- Unix
- cmd = { "java", "-jar", "path/to/groovyls/groovy-language-server-all.jar" },
- ...
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.groovyls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "java", "-jar", "groovy-language-server-all.jar" }
- ```
- - `filetypes` :
- ```lua
- { "groovy" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## haxe_language_server
-
-https://github.com/vshaxe/haxe-language-server
-
-The Haxe language server can be built by running the following commands from
-the project's root directory:
-
- npm install
- npx lix run vshaxe-build -t language-server
-
-This will create `bin/server.js`. Note that the server requires Haxe 3.4.0 or
-higher.
-
-After building the language server, set the `cmd` setting in your setup
-function:
-
-```lua
-lspconfig.haxe_language_server.setup({
- cmd = {"node", "path/to/bin/server.js"},
-})
-```
-
-By default, an HXML compiler arguments file named `build.hxml` is expected in
-your project's root directory. If your file is named something different,
-specify it using the `init_options.displayArguments` setting.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.haxe_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "haxe-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "haxe" }
- ```
- - `init_options` :
- ```lua
- {
- displayArguments = { "build.hxml" }
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("*.hxml")
- ```
- - `settings` :
- ```lua
- {
- haxe = {
- executable = "haxe"
- }
- }
- ```
-
-
-## hdl_checker
-
-https://github.com/suoto/hdl_checker
-Language server for hdl-checker.
-Install using: `pip install hdl-checker --upgrade`
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.hdl_checker.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "hdl_checker", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "vhdl", "verilog", "systemverilog" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## hhvm
-
-Language server for programs written in Hack
-https://hhvm.com/
-https://github.com/facebook/hhvm
-See below for how to setup HHVM & typechecker:
-https://docs.hhvm.com/hhvm/getting-started/getting-started
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.hhvm.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "hh_client", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "php", "hack" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".hhconfig")
- ```
-
-
-## hie
-
-https://github.com/haskell/haskell-ide-engine
-
-the following init_options are supported (see https://github.com/haskell/haskell-ide-engine#configuration):
-```lua
-init_options = {
- languageServerHaskell = {
- hlintOn = bool;
- maxNumberOfProblems = number;
- diagnosticsDebounceDuration = number;
- liquidOn = bool (default false);
- completionSnippetsOn = bool (default true);
- formatOnImportOn = bool (default true);
- formattingProvider = string (default "brittany", alternate "floskell");
- }
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.hie.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "hie-wrapper", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "haskell" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("stack.yaml", "package.yaml", ".git")
- ```
-
-
-## hls
-
-https://github.com/haskell/haskell-language-server
-
-Haskell Language Server
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.hls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "haskell-language-server-wrapper", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "haskell", "lhaskell" }
- ```
- - `lspinfo` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- root_pattern("*.cabal", "stack.yaml", "cabal.project", "package.yaml", "hie.yaml")
- ```
- - `settings` :
- ```lua
- {
- haskell = {
- formattingProvider = "ormolu"
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## hoon_ls
-
-https://github.com/urbit/hoon-language-server
-
-A language server for Hoon.
-
-The language server can be installed via `npm install -g @hoon-language-server`
-
-Start a fake ~zod with `urbit -F zod`.
-Start the language server at the Urbit Dojo prompt with: `|start %language-server`
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.hoon_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "hoon-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "hoon" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## html
-
-https://github.com/hrsh7th/vscode-langservers-extracted
-
-`vscode-html-language-server` can be installed via `npm`:
-```sh
-npm i -g vscode-langservers-extracted
-```
-
-Neovim does not currently include built-in snippets. `vscode-html-language-server` only provides completions when snippet support is enabled.
-To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup.
-
-The code-formatting feature of the lsp can be controlled with the `provideFormatter` option.
-
-```lua
---Enable (broadcasting) snippet capability for completion
-local capabilities = vim.lsp.protocol.make_client_capabilities()
-capabilities.textDocument.completion.completionItem.snippetSupport = true
-
-require'lspconfig'.html.setup {
- capabilities = capabilities,
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.html.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vscode-html-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "html" }
- ```
- - `init_options` :
- ```lua
- {
- configurationSection = { "html", "css", "javascript" },
- embeddedLanguages = {
- css = true,
- javascript = true
- },
- provideFormatter = true
- }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## idris2_lsp
-
-https://github.com/idris-community/idris2-lsp
-
-The Idris 2 language server.
-
-Plugins for the Idris 2 filetype include
-[Idris2-Vim](https://github.com/edwinb/idris2-vim) (fewer features, stable) and
-[Nvim-Idris2](https://github.com/ShinKage/nvim-idris2) (cutting-edge,
-experimental).
-
-Idris2-Lsp requires a build of Idris 2 that includes the "Idris 2 API" package.
-Package managers with known support for this build include the
-[AUR](https://aur.archlinux.org/packages/idris2-api-git/) and
-[Homebrew](https://formulae.brew.sh/formula/idris2#default).
-
-If your package manager does not support the Idris 2 API, you will need to build
-Idris 2 from source. Refer to the
-[the Idris 2 installation instructions](https://github.com/idris-lang/Idris2/blob/main/INSTALL.md)
-for details. Steps 5 and 8 are listed as "optional" in that guide, but they are
-necessary in order to make the Idris 2 API available.
-
-You need to install a version of Idris2-Lsp that is compatible with your
-version of Idris 2. There should be a branch corresponding to every released
-Idris 2 version after v0.4.0. Use the latest commit on that branch. For example,
-if you have Idris v0.5.1, you should use the v0.5.1 branch of Idris2-Lsp.
-
-If your Idris 2 version is newer than the newest Idris2-Lsp branch, use the
-latest commit on the `master` branch, and set a reminder to check the Idris2-Lsp
-repo for the release of a compatible versioned branch.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.idris2_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "idris2-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "idris2" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## intelephense
-
-https://intelephense.com/
-
-`intelephense` can be installed via `npm`:
-```sh
-npm install -g intelephense
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.intelephense.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "intelephense", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "php" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("composer.json", ".git")
- ```
-
-
-## java_language_server
-
-https://github.com/georgewfraser/java-language-server
-
-Java language server
-
-Point `cmd` to `lang_server_linux.sh` or the equivalent script for macOS/Windows provided by java-language-server
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.java_language_server.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "java" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## jdtls
-
-https://projects.eclipse.org/projects/eclipse.jdt.ls
-
-Language server for Java.
-
-IMPORTANT: If you want all the features jdtls has to offer, [nvim-jdtls](https://github.com/mfussenegger/nvim-jdtls)
-is highly recommended. If all you need is diagnostics, completion, imports, gotos and formatting and some code actions
-you can keep reading here.
-
-For manual installation you can download precompiled binaries from the
-[official downloads site](http://download.eclipse.org/jdtls/snapshots/?d)
-
-Due to the nature of java, settings cannot be inferred. Please set the following
-environmental variables to match your installation. If you need per-project configuration
-[direnv](https://github.com/direnv/direnv) is highly recommended.
-
-```bash
-# Mandatory:
-# .bashrc
-export JDTLS_HOME=/path/to/jdtls_root # Directory with the plugin and configs directories
-
-# Optional:
-export JAVA_HOME=/path/to/java_home # In case you don't have java in path or want to use a version in particular
-export WORKSPACE=/path/to/workspace # Defaults to $HOME/workspace
-```
-```lua
- -- init.lua
- require'lspconfig'.jdtls.setup{}
-```
-
-For automatic installation you can use the following unofficial installers/launchers under your own risk:
- - [jdtls-launcher](https://github.com/eruizc-dev/jdtls-launcher) (Includes lombok support by default)
- ```lua
- -- init.lua
- require'lspconfig'.jdtls.setup{ cmd = { 'jdtls' } }
- ```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.jdtls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "/usr/lib/jvm/temurin-11-jdk-amd64/bin/java", "-Declipse.application=org.eclipse.jdt.ls.core.id1", "-Dosgi.bundles.defaultStartLevel=4", "-Declipse.product=org.eclipse.jdt.ls.core.product", "-Dlog.protocol=true", "-Dlog.level=ALL", "-Xms1g", "-Xmx2G", "--add-modules=ALL-SYSTEM", "--add-opens", "java.base/java.util=ALL-UNNAMED", "--add-opens", "java.base/java.lang=ALL-UNNAMED", "-jar", "/plugins/org.eclipse.equinox.launcher_*.jar", "-configuration", "config_linux", "-data", "/home/runner/workspace" }
- ```
- - `filetypes` :
- ```lua
- { "java" }
- ```
- - `handlers` :
- ```lua
- {
- ["language/status"] = <function 1>,
- ["textDocument/codeAction"] = <function 2>,
- ["textDocument/rename"] = <function 3>,
- ["workspace/applyEdit"] = <function 4>
- }
- ```
- - `init_options` :
- ```lua
- {
- jvm_args = {},
- workspace = "/home/runner/workspace"
- }
- ```
- - `root_dir` :
- ```lua
- {
- -- Single-module projects
- {
- 'build.xml', -- Ant
- 'pom.xml', -- Maven
- 'settings.gradle', -- Gradle
- 'settings.gradle.kts', -- Gradle
- },
- -- Multi-module projects
- { 'build.gradle', 'build.gradle.kts' },
- } or vim.fn.getcwd()
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## jedi_language_server
-
-https://github.com/pappasam/jedi-language-server
-
-`jedi-language-server`, a language server for Python, built on top of jedi
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.jedi_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "jedi-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "python" }
- ```
- - `root_dir` :
- ```lua
- vim's starting directory
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## jsonls
-
-https://github.com/hrsh7th/vscode-langservers-extracted
-
-vscode-json-language-server, a language server for JSON and JSON schema
-
-`vscode-json-language-server` can be installed via `npm`:
-```sh
-npm i -g vscode-langservers-extracted
-```
-
-Neovim does not currently include built-in snippets. `vscode-json-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup.
-
-```lua
---Enable (broadcasting) snippet capability for completion
-local capabilities = vim.lsp.protocol.make_client_capabilities()
-capabilities.textDocument.completion.completionItem.snippetSupport = true
-
-require'lspconfig'.jsonls.setup {
- capabilities = capabilities,
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.jsonls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vscode-json-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "json", "jsonc" }
- ```
- - `init_options` :
- ```lua
- {
- provideFormatter = true
- }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## jsonnet_ls
-
-https://github.com/grafana/jsonnet-language-server
-
-A Language Server Protocol (LSP) server for Jsonnet.
-
-The language server can be installed with `go`:
-```sh
-go install github.com/grafana/jsonnet-language-server@latest
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.jsonnet_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "jsonnet-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "jsonnet", "libsonnet" }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- root_pattern("jsonnetfile.json")
- ```
-
-
-## julials
-
-https://github.com/julia-vscode/julia-vscode
-
-LanguageServer.jl can be installed with `julia` and `Pkg`:
-```sh
-julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.add("LanguageServer")'
-```
-where `~/.julia/environments/nvim-lspconfig` is the location where
-the default configuration expects LanguageServer.jl to be installed.
-
-To update an existing install, use the following command:
-```sh
-julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.update()'
-```
-
-Note: In order to have LanguageServer.jl pick up installed packages or dependencies in a
-Julia project, you must make sure that the project is instantiated:
-```sh
-julia --project=/path/to/my/project -e 'using Pkg; Pkg.instantiate()'
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.julials.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "julia", "--startup-file=no", "--history-file=no", "-e", ' # Load LanguageServer.jl: attempt to load from ~/.julia/environments/nvim-lspconfig\n # with the regular load path as a fallback\n ls_install_path = joinpath(\n get(DEPOT_PATH, 1, joinpath(homedir(), ".julia")),\n "environments", "nvim-lspconfig"\n )\n pushfirst!(LOAD_PATH, ls_install_path)\n using LanguageServer\n popfirst!(LOAD_PATH)\n depot_path = get(ENV, "JULIA_DEPOT_PATH", "")\n project_path = let\n dirname(something(\n ## 1. Finds an explicitly set project (JULIA_PROJECT)\n Base.load_path_expand((\n p = get(ENV, "JULIA_PROJECT", nothing);\n p === nothing ? nothing : isempty(p) ? nothing : p\n )),\n ## 2. Look for a Project.toml file in the current working directory,\n ## or parent directories, with $HOME as an upper boundary\n Base.current_project(),\n ## 3. First entry in the load path\n get(Base.load_path(), 1, nothing),\n ## 4. Fallback to default global environment,\n ## this is more or less unreachable\n Base.load_path_expand("@v#.#"),\n ))\n end\n @info "Running language server" VERSION pwd() project_path depot_path\n server = LanguageServer.LanguageServerInstance(stdin, stdout, project_path, depot_path)\n server.runlinter = true\n run(server)\n ' }
- ```
- - `filetypes` :
- ```lua
- { "julia" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## kotlin_language_server
-
- A kotlin language server which was developed for internal usage and
- released afterwards. Maintaining is not done by the original author,
- but by fwcd.
-
- It is built via gradle and developed on github.
- Source and additional description:
- https://github.com/fwcd/kotlin-language-server
-
- This server requires vim to be aware of the kotlin-filetype.
- You could refer for this capability to:
- https://github.com/udalov/kotlin-vim (recommended)
- Note that there is no LICENSE specified yet.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.kotlin_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "kotlin-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "kotlin" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("settings.gradle")
- ```
-
-
-## lean3ls
-
-https://github.com/leanprover/lean-client-js/tree/master/lean-language-server
-
-Lean installation instructions can be found
-[here](https://leanprover-community.github.io/get_started.html#regular-install).
-
-Once Lean is installed, you can install the Lean 3 language server by running
-```sh
-npm install -g lean-language-server
-```
-
-Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim),
-that plugin fully handles the setup of the Lean language server,
-and you shouldn't set up `lean3ls` both with it and `lspconfig`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.lean3ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "lean-language-server", "--stdio", "--", "-M", "4096", "-T", "100000" }
- ```
- - `filetypes` :
- ```lua
- { "lean3" }
- ```
- - `offset_encoding` :
- ```lua
- "utf-32"
- ```
- - `root_dir` :
- ```lua
- root_pattern("leanpkg.toml") or root_pattern(".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## leanls
-
-https://github.com/leanprover/lean4
-
-Lean installation instructions can be found
-[here](https://leanprover-community.github.io/get_started.html#regular-install).
-
-The Lean 4 language server is built-in with a Lean 4 install
-(and can be manually run with, e.g., `lean --server`).
-
-Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim),
-that plugin fully handles the setup of the Lean language server,
-and you shouldn't set up `leanls` both with it and `lspconfig`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.leanls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "lake", "serve", "--" }
- ```
- - `filetypes` :
- ```lua
- { "lean" }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `options` :
- ```lua
- {
- no_lake_lsp_cmd = { "lean", "--server" }
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("lakefile.lean", "lean-toolchain", "leanpkg.toml", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## lelwel_ls
-
-https://github.com/0x2a-42/lelwel
-
-Language server for lelwel grammars.
-
-You can install `lelwel-ls` via cargo:
-```sh
-cargo install --features="lsp" lelwel
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.lelwel_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "lelwel-ls" }
- ```
- - `filetypes` :
- ```lua
- { "llw" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## lemminx
-
-https://github.com/eclipse/lemminx
-
-The easiest way to install the server is to get a binary at https://download.jboss.org/jbosstools/vscode/stable/lemminx-binary/ and place it in your PATH.
-
-NOTE to macOS users: Binaries from unidentified developers are blocked by default. If you trust the downloaded binary from jboss.org, run it once, cancel the prompt, then remove the binary from Gatekeeper quarantine with `xattr -d com.apple.quarantine lemminx`. It should now run without being blocked.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.lemminx.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "lemminx" }
- ```
- - `filetypes` :
- ```lua
- { "xml", "xsd", "xsl", "xslt", "svg" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## ltex
-
-https://github.com/valentjn/ltex-ls
-
-LTeX Language Server: LSP language server for LanguageTool 🔍✔️ with support for LaTeX 🎓, Markdown 📝, and others
-
-To install, download the latest [release](https://github.com/valentjn/ltex-ls/releases) and ensure `ltex-ls` is on your path.
-
-To support org files or R sweave, users can define a custom filetype autocommand (or use a plugin which defines these filetypes):
-
-```lua
-vim.cmd [[ autocmd BufRead,BufNewFile *.org set filetype=org ]]
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ltex.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ltex-ls" }
- ```
- - `filetypes` :
- ```lua
- { "bib", "gitcommit", "markdown", "org", "plaintex", "rst", "rnoweb", "tex" }
- ```
- - `get_language_id` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## metals
-
-https://scalameta.org/metals/
-
-Scala language server with rich IDE features.
-
-See full instructions in the Metals documentation:
-
-https://scalameta.org/metals/docs/editors/vim.html#using-an-alternative-lsp-client
-
-Note: that if you're using [nvim-metals](https://github.com/scalameta/nvim-metals), that plugin fully handles the setup and installation of Metals, and you shouldn't set up Metals both with it and `lspconfig`.
-
-To install Metals, make sure to have [coursier](https://get-coursier.io/docs/cli-installation) installed, and once you do you can install the latest Metals with `cs install metals`. You can also manually bootstrap Metals with the following command.
-
-```bash
-cs bootstrap \
- --java-opt -Xss4m \
- --java-opt -Xms100m \
- org.scalameta:metals_2.12:<enter-version-here> \
- -r bintray:scalacenter/releases \
- -r sonatype:snapshots \
- -o /usr/local/bin/metals -f
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.metals.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "metals" }
- ```
- - `filetypes` :
- ```lua
- { "scala" }
- ```
- - `init_options` :
- ```lua
- {
- compilerOptions = {
- snippetAutoIndent = false
- },
- isHttpEnabled = true,
- statusBarProvider = "show-message"
- }
- ```
- - `message_level` :
- ```lua
- 4
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("build.sbt", "build.sc", "build.gradle", "pom.xml")
- ```
-
-
-## mint
-
-https://www.mint-lang.com
-
-Install Mint using the [instructions](https://www.mint-lang.com/install).
-The language server is included since version 0.12.0.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.mint.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "mint", "ls" }
- ```
- - `filetypes` :
- ```lua
- { "mint" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## mm0_ls
-
-https://github.com/digama0/mm0
-
-Language Server for the metamath-zero theorem prover.
-
-Requires [mm0-rs](https://github.com/digama0/mm0/tree/master/mm0-rs) to be installed
-and available on the `PATH`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.mm0_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "mm0-rs", "server" }
- ```
- - `filetypes` :
- ```lua
- { "metamath-zero" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## nickel_ls
-
-Nickel Language Server
-
-https://github.com/tweag/nickel
-
-`nls` can be installed with nix, or cargo, from the Nickel repository.
-```sh
-git clone https://github.com/tweag/nickel.git
-```
-
-Nix:
-```sh
-cd nickel
-nix-env -f . -i
-```
-
-cargo:
-```sh
-cd nickel/lsp/nls
-cargo install --path .
-```
-
-In order to have lspconfig detect Nickel filetypes (a prequisite for autostarting a server),
-install the [Nickel vim plugin](https://github.com/nickel-lang/vim-nickel).
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.nickel_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "nls" }
- ```
- - `filetypes` :
- ```lua
- { "ncl", "nickel" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## nimls
-
-https://github.com/PMunch/nimlsp
-`nimlsp` can be installed via the `nimble` package manager:
-```sh
-nimble install nimlsp
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.nimls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "nimlsp" }
- ```
- - `filetypes` :
- ```lua
- { "nim" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## ocamlls
-
-https://github.com/ocaml-lsp/ocaml-language-server
-
-`ocaml-language-server` can be installed via `npm`
-```sh
-npm install -g ocaml-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ocamlls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ocaml-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "ocaml", "reason" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("*.opam", "esy.json", "package.json")
- ```
-
-
-## ocamllsp
-
-https://github.com/ocaml/ocaml-lsp
-
-`ocaml-lsp` can be installed as described in [installation guide](https://github.com/ocaml/ocaml-lsp#installation).
-
-To install the lsp server in a particular opam switch:
-```sh
-opam pin add ocaml-lsp-server https://github.com/ocaml/ocaml-lsp.git
-opam install ocaml-lsp-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ocamllsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ocamllsp" }
- ```
- - `filetypes` :
- ```lua
- { "ocaml", "ocaml.menhir", "ocaml.interface", "ocaml.ocamllex", "reason" }
- ```
- - `get_language_id` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- root_pattern("*.opam", "esy.json", "package.json", ".git")
- ```
-
-
-## ols
-
- https://github.com/DanielGavin/ols
-
- `Odin Language Server`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.ols.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "ols" }
- ```
- - `filetypes` :
- ```lua
- { "odin" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("ols.json", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## omnisharp
-
-https://github.com/omnisharp/omnisharp-roslyn
-OmniSharp server based on Roslyn workspaces
-
-`omnisharp-roslyn` can be installed by downloading and extracting a release from [here](https://github.com/OmniSharp/omnisharp-roslyn/releases).
-Omnisharp can also be built from source by following the instructions [here](https://github.com/omnisharp/omnisharp-roslyn#downloading-omnisharp).
-
-Omnisharp requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed.
-
-**By default, omnisharp-roslyn doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary.
-
-```lua
-local pid = vim.fn.getpid()
--- On linux/darwin if using a release build, otherwise under scripts/OmniSharp(.Core)(.cmd)
-local omnisharp_bin = "/path/to/omnisharp-repo/run"
--- on Windows
--- local omnisharp_bin = "/path/to/omnisharp/OmniSharp.exe"
-require'lspconfig'.omnisharp.setup{
- cmd = { omnisharp_bin, "--languageserver" , "--hostPID", tostring(pid) };
- ...
-}
-```
-
-Note, if you download the executable for darwin you will need to strip the quarantine label to run:
-```bash
-find /path/to/omnisharp-osx | xargs xattr -r -d com.apple.quarantine
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.omnisharp.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "cs", "vb" }
- ```
- - `init_options` :
- ```lua
- {}
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- root_pattern(".sln") or root_pattern(".csproj")
- ```
-
-
-## opencl_ls
-
-https://github.com/Galarius/opencl-language-server
-
-Build instructions can be found [here](https://github.com/Galarius/opencl-language-server/blob/main/_dev/build.md).
-
-Prebuilt binaries are available for Linux, macOS and Windows [here](https://github.com/Galarius/opencl-language-server/releases).
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.opencl_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "opencl-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "opencl" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern(".git")
- ```
-
-
-## openscad_ls
-
-https://github.com/dzhu/openscad-language-server
-
-A Language Server Protocol server for OpenSCAD
-
-You can build and install `openscad-language-server` binary with `cargo`:
-```sh
-cargo install openscad-language-server
-```
-
-Vim does not have built-in syntax for the `openscad` filetype currently.
-
-This can be added via an autocmd:
-
-```lua
-vim.cmd [[ autocmd BufRead,BufNewFile *.scad set filetype=openscad ]]
-```
-
-or by installing a filetype plugin such as https://github.com/sirtaj/vim-openscad
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.openscad_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "openscad-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "openscad" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## pasls
-
-https://github.com/genericptr/pascal-language-server
-
-An LSP server implementation for Pascal variants that are supported by Free Pascal, including Object Pascal. It uses CodeTools from Lazarus as backend.
-
-First set `cmd` to the Pascal lsp binary.
-
-Customization options are passed to pasls as environment variables for example in your `.bashrc`:
-```bash
-export FPCDIR='/usr/lib/fpc/src' # FPC source directory (This is the only required option for the server to work).
-export PP='/usr/lib/fpc/3.2.2/ppcx64' # Path to the Free Pascal compiler executable.
-export LAZARUSDIR='/usr/lib/lazarus' # Path to the Lazarus sources.
-export FPCTARGET='' # Target operating system for cross compiling.
-export FPCTARGETCPU='x86_64' # Target CPU for cross compiling.
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.pasls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "pasls" }
- ```
- - `filetypes` :
- ```lua
- { "pascal" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## perlls
-
-https://github.com/richterger/Perl-LanguageServer/tree/master/clients/vscode/perl
-
-`Perl-LanguageServer`, a language server for Perl.
-
-To use the language server, ensure that you have Perl::LanguageServer installed and perl command is on your path.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.perlls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "perl", "-MPerl::LanguageServer", "-e", "Perl::LanguageServer::run", "--", "--port 13603", "--nostdio 0", "--version 2.1.0" }
- ```
- - `filetypes` :
- ```lua
- { "perl" }
- ```
- - `root_dir` :
- ```lua
- vim's starting directory
- ```
- - `settings` :
- ```lua
- {
- perl = {
- fileFilter = { ".pm", ".pl" },
- ignoreDirs = ".git",
- perlCmd = "perl",
- perlInc = " "
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## perlnavigator
-
-https://github.com/bscan/PerlNavigator
-
-A Perl language server
-
-**By default, perlnavigator doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path.
-You have to install the language server manually.
-
-Clone the PerlNavigator repo, install based on the [instructions](https://github.com/bscan/PerlNavigator#installation-for-other-editors),
-and point `cmd` to `server.js` inside the `server/out` directory:
-
-```lua
-cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'}
-```
-
-At minimum, you will need `perl` in your path. If you want to use a non-standard `perl` you will need to set your configuration like so:
-```lua
-settings = {
- perlnavigator = {
- perlPath = '/some/odd/location/my-perl'
- }
-}
-```
-
-The `contributes.configuration.properties` section of `perlnavigator`'s `package.json` has all available configuration settings. All
-settings have a reasonable default, but, at minimum, you may want to point `perlnavigator` at your `perltidy` and `perlcritic` configurations.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.perlnavigator.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- {}
- ```
- - `filetypes` :
- ```lua
- { "perl" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## perlpls
-
-https://github.com/FractalBoy/perl-language-server
-https://metacpan.org/pod/PLS
-
-`PLS`, another language server for Perl.
-
-To use the language server, ensure that you have PLS installed and that it is in your path
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.perlpls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "pls" }
- ```
- - `filetypes` :
- ```lua
- { "perl" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `settings` :
- ```lua
- {
- perl = {
- perlcritic = {
- enabled = false
- },
- syntax = {
- enabled = true
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## phpactor
-
-https://github.com/phpactor/phpactor
-
-Installation: https://phpactor.readthedocs.io/en/master/usage/standalone.html#global-installation
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.phpactor.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "phpactor", "language-server" }
- ```
- - `filetypes` :
- ```lua
- { "php" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("composer.json", ".git")
- ```
-
-
-## please
-
-https://github.com/thought-machine/please
-
-High-performance extensible build system for reproducible multi-language builds.
-
-The `plz` binary will automatically install the LSP for you on first run
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.please.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "plz", "tool", "lps" }
- ```
- - `filetypes` :
- ```lua
- { "bzl" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## powershell_es
-
-https://github.com/PowerShell/PowerShellEditorServices
-
-Language server for PowerShell.
-
-To install, download and extract PowerShellEditorServices.zip
-from the [releases](https://github.com/PowerShell/PowerShellEditorServices/releases).
-To configure the language server, set the property `bundle_path` to the root
-of the extracted PowerShellEditorServices.zip.
-
-The default configuration doesn't set `cmd` unless `bundle_path` is specified.
-
-```lua
-require'lspconfig'.powershell_es.setup{
- bundle_path = 'c:/w/PowerShellEditorServices',
-}
-```
-
-By default the languageserver is started in `pwsh` (PowerShell Core). This can be changed by specifying `shell`.
-
-```lua
-require'lspconfig'.powershell_es.setup{
- bundle_path = 'c:/w/PowerShellEditorServices',
- shell = 'powershell.exe',
-}
-```
-
-Note that the execution policy needs to be set to `Unrestricted` for the languageserver run under PowerShell
-
-If necessary, specific `cmd` can be defined instead of `bundle_path`.
-See [PowerShellEditorServices](https://github.com/PowerShell/PowerShellEditorServices#stdio)
-to learn more.
-
-```lua
-require'lspconfig'.powershell_es.setup{
- cmd = {'pwsh', '-NoLogo', '-NoProfile', '-Command', "c:/PSES/Start-EditorServices.ps1 ..."}
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.powershell_es.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "ps1" }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- git root or current directory
- ```
- - `shell` :
- ```lua
- "pwsh"
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## prismals
-
-Language Server for the Prisma JavaScript and TypeScript ORM
-
-`@prisma/language-server` can be installed via npm
-```sh
-npm install -g @prisma/language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.prismals.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "prisma-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "prisma" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git", "package.json")
- ```
- - `settings` :
- ```lua
- {
- prisma = {
- prismaFmtBinPath = ""
- }
- }
- ```
-
-
-## prosemd_lsp
-
-https://github.com/kitten/prosemd-lsp
-
-An experimental LSP for Markdown.
-
-Please see the manual installation instructions: https://github.com/kitten/prosemd-lsp#manual-installation
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.prosemd_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "prosemd-lsp", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "markdown" }
- ```
- - `root_dir` :
- ```lua
- <function 1>
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## psalm
-
-https://github.com/vimeo/psalm
-
-Can be installed with composer.
-```sh
-composer global require vimeo/psalm
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.psalm.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "psalm-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "php" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("psalm.xml", "psalm.xml.dist")
- ```
-
-
-## puppet
-
-LSP server for Puppet.
-
-Installation:
-
-- Clone the editor-services repository:
- https://github.com/puppetlabs/puppet-editor-services
-
-- Navigate into that directory and run: `bundle install`
-
-- Install the 'puppet-lint' gem: `gem install puppet-lint`
-
-- Add that repository to $PATH.
-
-- Ensure you can run `puppet-languageserver` from outside the editor-services directory.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.puppet.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "puppet-languageserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "puppet" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("manifests", ".puppet-lint.rc", "hiera.yaml", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## purescriptls
-
-https://github.com/nwolverson/purescript-language-server
-`purescript-language-server` can be installed via `npm`
-```sh
-npm install -g purescript-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.purescriptls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "purescript-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "purescript" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("spago.dhall, 'psc-package.json', bower.json")
- ```
-
-
-## pylsp
-
-https://github.com/python-lsp/python-lsp-server
-
-A Python 3.6+ implementation of the Language Server Protocol.
-
-The language server can be installed via `pipx install 'python-lsp-server[all]'`.
-Further instructions can be found in the [project's README](https://github.com/python-lsp/python-lsp-server).
-
-Note: This is a community fork of `pyls`.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.pylsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "pylsp" }
- ```
- - `filetypes` :
- ```lua
- { "python" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## pyre
-
-https://pyre-check.org/
-
-`pyre` a static type checker for Python 3.
-
-`pyre` offers an extremely limited featureset. It currently only supports diagnostics,
-which are triggered on save.
-
-Do not report issues for missing features in `pyre` to `lspconfig`.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.pyre.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "pyre", "persistent" }
- ```
- - `filetypes` :
- ```lua
- { "python" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## pyright
-
-https://github.com/microsoft/pyright
-
-`pyright`, a static type checker and language server for python
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.pyright.setup{}
-```
-**Commands:**
-- PyrightOrganizeImports: Organize Imports
-
-**Default values:**
- - `cmd` :
- ```lua
- { "pyright-langserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "python" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- python = {
- analysis = {
- autoSearchPaths = true,
- diagnosticMode = "workspace",
- useLibraryCodeForTypes = true
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## quick_lint_js
-
-https://quick-lint-js.com/
-
-quick-lint-js finds bugs in JavaScript programs.
-
-See installation [instructions](https://quick-lint-js.com/install/)
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.quick_lint_js.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "quick-lint-js", "--lsp-server" }
- ```
- - `filetypes` :
- ```lua
- { "javascript" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## r_language_server
-
-[languageserver](https://github.com/REditorSupport/languageserver) is an
-implementation of the Microsoft's Language Server Protocol for the R
-language.
-
-It is released on CRAN and can be easily installed by
-
-```R
-install.packages("languageserver")
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.r_language_server.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "R", "--slave", "-e", "languageserver::run()" }
- ```
- - `filetypes` :
- ```lua
- { "r", "rmd" }
- ```
- - `log_level` :
- ```lua
- 2
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git") or os_homedir
- ```
-
-
-## racket_langserver
-
-[https://github.com/jeapostrophe/racket-langserver](https://github.com/jeapostrophe/racket-langserver)
-
-The Racket language server. This project seeks to use
-[DrRacket](https://github.com/racket/drracket)'s public API to provide
-functionality that mimics DrRacket's code tools as closely as possible.
-
-Install via `raco`: `raco pkg install racket-langserver`
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.racket_langserver.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "racket", "--lib", "racket-langserver" }
- ```
- - `filetypes` :
- ```lua
- { "racket", "scheme" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## reason_ls
-
-Reason language server
-
-**By default, reason_ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path.
-You have to install the language server manually.
-
-You can install reason language server from [reason-language-server](https://github.com/jaredly/reason-language-server) repository.
-
-```lua
-cmd = {'<path_to_reason_language_server>'}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.reason_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "reason-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "reason" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## remark_ls
-
-https://github.com/remarkjs/remark-language-server
-
-`remark-language-server` can be installed via `npm`:
-```sh
-npm install -g remark-language-server
-```
-
-`remark-language-server` uses the same
-[configuration files](https://github.com/remarkjs/remark/tree/main/packages/remark-cli#example-config-files-json-yaml-js)
-as `remark-cli`.
-
-This uses a plugin based system. Each plugin needs to be installed locally using `npm` or `yarn`.
-
-For example, given the following `.remarkrc.json`:
-
-```json
-{
- "presets": [
- "remark-preset-lint-recommended"
- ]
-}
-```
-
-`remark-preset-lint-recommended` needs to be installed in the local project:
-
-```sh
-npm install remark-preset-lint-recommended
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.remark_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "remark-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "markdown" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## rescriptls
-
-https://github.com/rescript-lang/rescript-vscode
-
-ReScript language server
-
-**By default, rescriptls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path.
-You have to install the language server manually.
-
-You can use the bundled language server inside the [vim-rescript](https://github.com/rescript-lang/vim-rescript) repo.
-
-Clone the vim-rescript repo and point `cmd` to `server.js` inside `server/out` directory:
-
-```lua
-cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'}
-
-```
-
-If you have vim-rescript installed you can also use that installation. for example if you're using packer.nvim you can set cmd to something like this:
-
-```lua
-cmd = {
- 'node',
- '/home/username/.local/share/nvim/site/pack/packer/start/vim-rescript/server/out/server.js',
- '--stdio'
-}
-```
-
-Another option is to use vscode extension [release](https://github.com/rescript-lang/rescript-vscode/releases).
-Take a look at [here](https://github.com/rescript-lang/rescript-vscode#use-with-other-editors) for instructions.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.rescriptls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- {}
- ```
- - `filetypes` :
- ```lua
- { "rescript" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## rls
-
-https://github.com/rust-lang/rls
-
-rls, a language server for Rust
-
-See https://github.com/rust-lang/rls#setup to setup rls itself.
-See https://github.com/rust-lang/rls#configuration for rls-specific settings.
-All settings listed on the rls configuration section of the readme
-must be set under settings.rust as follows:
-
-```lua
-nvim_lsp.rls.setup {
- settings = {
- rust = {
- unstable_features = true,
- build_on_save = false,
- all_features = true,
- },
- },
-}
-```
-
-If you want to use rls for a particular build, eg nightly, set cmd as follows:
-
-```lua
-cmd = {"rustup", "run", "nightly", "rls"}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.rls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "rls" }
- ```
- - `filetypes` :
- ```lua
- { "rust" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Cargo.toml")
- ```
-
-
-## rnix
-
-https://github.com/nix-community/rnix-lsp
-
-A language server for Nix providing basic completion and formatting via nixpkgs-fmt.
-
-To install manually, run `cargo install rnix-lsp`. If you are using nix, rnix-lsp is in nixpkgs.
-
-This server accepts configuration via the `settings` key.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.rnix.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "rnix-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "nix" }
- ```
- - `init_options` :
- ```lua
- {}
- ```
- - `root_dir` :
- ```lua
- vim's starting directory
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## robotframework_ls
-
-https://github.com/robocorp/robotframework-lsp
-
-Language Server Protocol implementation for Robot Framework.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.robotframework_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "robotframework_ls" }
- ```
- - `filetypes` :
- ```lua
- { "robot" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern('robotidy.toml', 'pyproject.toml')(fname) or util.find_git_ancestor(fname)
- ```
-
-
-## rome
-
-https://rome.tools
-
-Language server for the Rome Frontend Toolchain.
-
-```sh
-npm install [-g] rome
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.rome.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "rome", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "json", "typescript", "typescript.tsx", "typescriptreact" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('package.json', 'node_modules', '.git')
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## rust_analyzer
-
-https://github.com/rust-analyzer/rust-analyzer
-
-rust-analyzer (aka rls 2.0), a language server for Rust
-
-See [docs](https://github.com/rust-analyzer/rust-analyzer/tree/master/docs/user#settings) for extra settings.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.rust_analyzer.setup{}
-```
-**Commands:**
-- CargoReload: Reload current cargo workspace
-
-**Default values:**
- - `cmd` :
- ```lua
- { "rust-analyzer" }
- ```
- - `filetypes` :
- ```lua
- { "rust" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Cargo.toml", "rust-project.json")
- ```
- - `settings` :
- ```lua
- {
- ["rust-analyzer"] = {}
- }
- ```
-
-
-## salt_ls
-
-Language server for Salt configuration files.
-https://github.com/dcermak/salt-lsp
-
-The language server can be installed with `pip`:
-```sh
-pip install salt-lsp
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.salt_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "salt_lsp_server" }
- ```
- - `filetypes` :
- ```lua
- { "sls" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('.git')
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## scry
-
-https://github.com/crystal-lang-tools/scry
-
-Crystal language server.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.scry.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "scry" }
- ```
- - `filetypes` :
- ```lua
- { "crystal" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('shard.yml', '.git')
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## serve_d
-
- https://github.com/Pure-D/serve-d
-
- `Microsoft language server protocol implementation for D using workspace-d.`
- Download a binary from https://github.com/Pure-D/serve-d/releases and put it in your $PATH.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.serve_d.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "serve-d" }
- ```
- - `filetypes` :
- ```lua
- { "d" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("dub.json", "dub.sdl", ".git")
- ```
-
-
-## sixtyfps
-
-https://github.com/sixtyfpsui/sixtyfps
-`SixtyFPS`'s language server
-
-You can build and install `sixtyfps-lsp` binary with `cargo`:
-```sh
-cargo install sixtyfps-lsp
-```
-
-Vim does not have built-in syntax for the `sixtyfps` filetype currently.
-
-This can be added via an autocmd:
-
-```lua
-vim.cmd [[ autocmd BufRead,BufNewFile *.60 set filetype=sixtyfps ]]
-```
-
-or by installing a filetype plugin such as https://github.com/RustemB/sixtyfps-vim
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sixtyfps.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "sixtyfps-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "sixtyfps" }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## slint_lsp
-
-https://github.com/slint-ui/slint
-`Slint`'s language server
-
-You can build and install `slint-lsp` binary with `cargo`:
-```sh
-cargo install slint-lsp
-```
-
-Vim does not have built-in syntax for the `slint` filetype at this time.
-
-This can be added via an autocmd:
-
-```lua
-vim.cmd [[ autocmd BufRead,BufNewFile *.slint set filetype=slint ]]
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.slint_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "slint-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "slint" }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## solang
-
-A language server for Solidity
-
-See the [documentation](https://solang.readthedocs.io/en/latest/installing.html) for installation instructions.
-
-The language server only provides the following capabilities:
-* Syntax highlighting
-* Diagnostics
-* Hover
-
-There is currently no support for completion, goto definition, references, or other functionality.
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.solang.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "solang", "--language-server", "--target", "ewasm" }
- ```
- - `filetypes` :
- ```lua
- { "solidity" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
-
-
-## solargraph
-
-https://solargraph.org/
-
-solargraph, a language server for Ruby
-
-You can install solargraph via gem install.
-
-```sh
-gem install --user-install solargraph
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.solargraph.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "solargraph", "stdio" }
- ```
- - `filetypes` :
- ```lua
- { "ruby" }
- ```
- - `init_options` :
- ```lua
- {
- formatting = true
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Gemfile", ".git")
- ```
- - `settings` :
- ```lua
- {
- solargraph = {
- diagnostics = true
- }
- }
- ```
-
-
-## solc
-
-https://docs.soliditylang.org/en/latest/installing-solidity.html
-
-solc is the native language server for the Solidity language.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.solc.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "solc", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "solidity" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git")
- ```
-
-
-## solidity_ls
-
-npm install -g solidity-language-server
-
-solidity-language-server is a language server for the solidity language ported from the vscode solidity extension
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.solidity_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "solidity-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "solidity" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".git", "package.json")
- ```
-
-
-## sorbet
-
-https://sorbet.org
-
-Sorbet is a fast, powerful type checker designed for Ruby.
-
-You can install Sorbet via gem install. You might also be interested in how to set
-Sorbet up for new projects: https://sorbet.org/docs/adopting.
-
-```sh
-gem install sorbet
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sorbet.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "srb", "tc", "--lsp" }
- ```
- - `filetypes` :
- ```lua
- { "ruby" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Gemfile", ".git")
- ```
-
-
-## sourcekit
-
-https://github.com/apple/sourcekit-lsp
-
-Language server for Swift and C/C++/Objective-C.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sourcekit.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "sourcekit-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "swift", "c", "cpp", "objective-c", "objective-cpp" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Package.swift", ".git")
- ```
-
-
-## sourcery
-
-https://github.com/sourcery-ai/sourcery
-
-Refactor Python instantly using the power of AI.
-
-It requires the initializationOptions param to be populated as shown below and will respond with the list of ServerCapabilities that it supports.
-
-init_options = {
- --- The Sourcery token for authenticating the user.
- --- This is retrieved from the Sourcery website and must be
- --- provided by each user. The extension must provide a
- --- configuration option for the user to provide this value.
- token = <YOUR_TOKEN>
-
- --- The extension's name and version as defined by the extension.
- extension_version = 'vim.lsp'
-
- --- The editor's name and version as defined by the editor.
- editor_version = 'vim'
-}
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sourcery.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "sourcery", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "python" }
- ```
- - `init_options` :
- ```lua
- {
- editor_version = "vim",
- extension_version = "vim.lsp"
- }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## spectral
-
-https://github.com/luizcorreia/spectral-language-server
- `A flexible JSON/YAML linter for creating automated style guides, with baked in support for OpenAPI v2 & v3.`
-
-`spectral-language-server` can be installed via `npm`:
-```sh
-npm i -g spectral-language-server
-```
-See [vscode-spectral](https://github.com/stoplightio/vscode-spectral#extension-settings) for configuration options.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.spectral.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "spectral-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "yaml", "json", "yml" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- enable = true,
- run = "onType",
- validateLanguages = { "yaml", "json", "yml" }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## sqlls
-
-https://github.com/joe-re/sql-language-server
-
-This LSP can be installed via `npm`. Find further instructions on manual installation of the sql-language-server at [joe-re/sql-language-server](https://github.com/joe-re/sql-language-server).
-<br>
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sqlls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "sql-language-server", "up", "--method", "stdio" }
- ```
- - `filetypes` :
- ```lua
- { "sql", "mysql" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## sqls
-
-https://github.com/lighttiger2505/sqls
-
-```lua
-require'lspconfig'.sqls.setup{
- cmd = {"path/to/command", "-config", "path/to/config.yml"};
- ...
-}
-```
-Sqls can be installed via `go get github.com/lighttiger2505/sqls`. Instructions for compiling Sqls from the source can be found at [lighttiger2505/sqls](https://github.com/lighttiger2505/sqls).
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sqls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "sqls" }
- ```
- - `filetypes` :
- ```lua
- { "sql", "mysql" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## stylelint_lsp
-
-https://github.com/bmatcuk/stylelint-lsp
-
-`stylelint-lsp` can be installed via `npm`:
-
-```sh
-npm i -g stylelint-lsp
-```
-
-Can be configured by passing a `settings.stylelintplus` object to `stylelint_lsp.setup`:
-
-```lua
-require'lspconfig'.stylelint_lsp.setup{
- settings = {
- stylelintplus = {
- -- see available options in stylelint-lsp documentation
- }
- }
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.stylelint_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "stylelint-lsp", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "css", "less", "scss", "sugarss", "vue", "wxss", "javascript", "javascriptreact", "typescript", "typescriptreact" }
- ```
- - `root_dir` :
- ```lua
- root_pattern('.stylelintrc', 'package.json')
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## sumneko_lua
-
-https://github.com/sumneko/lua-language-server
-
-Lua language server.
-
-`lua-language-server` can be installed by following the instructions [here](https://github.com/sumneko/lua-language-server/wiki/Build-and-Run). The default `cmd` assumes that the `lua-language-server` binary can be found in `$PATH`.
-
-```lua
-local runtime_path = vim.split(package.path, ';')
-table.insert(runtime_path, "lua/?.lua")
-table.insert(runtime_path, "lua/?/init.lua")
-
-require'lspconfig'.sumneko_lua.setup {
- settings = {
- Lua = {
- runtime = {
- -- Tell the language server which version of Lua you're using (most likely LuaJIT in the case of Neovim)
- version = 'LuaJIT',
- -- Setup your lua path
- path = runtime_path,
- },
- diagnostics = {
- -- Get the language server to recognize the `vim` global
- globals = {'vim'},
- },
- workspace = {
- -- Make the server aware of Neovim runtime files
- library = vim.api.nvim_get_runtime_file("", true),
- },
- -- Do not send telemetry data containing a randomized but unique identifier
- telemetry = {
- enable = false,
- },
- },
- },
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.sumneko_lua.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "lua-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "lua" }
- ```
- - `log_level` :
- ```lua
- 2
- ```
- - `root_dir` :
- ```lua
- root_pattern(".luarc.json", ".luacheckrc", ".stylua.toml", "selene.toml", ".git")
- ```
- - `settings` :
- ```lua
- {
- Lua = {
- telemetry = {
- enable = false
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## svelte
-
-https://github.com/sveltejs/language-tools/tree/master/packages/language-server
-
-`svelte-language-server` can be installed via `npm`:
-```sh
-npm install -g svelte-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.svelte.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "svelteserver", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "svelte" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("package.json", ".git")
- ```
-
-
-## svls
-
-https://github.com/dalance/svls
-
-Language server for verilog and SystemVerilog
-
-`svls` can be installed via `cargo`:
- ```sh
- cargo install svls
- ```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.svls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "svls" }
- ```
- - `filetypes` :
- ```lua
- { "verilog", "systemverilog" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
-
-
-## tailwindcss
-
-https://github.com/tailwindlabs/tailwindcss-intellisense
-
-Tailwind CSS Language Server can be installed via npm:
-```sh
-npm install -g @tailwindcss/language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.tailwindcss.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "tailwindcss-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "aspnetcorerazor", "astro", "astro-markdown", "blade", "django-html", "htmldjango", "edge", "eelixir", "ejs", "erb", "eruby", "gohtml", "haml", "handlebars", "hbs", "html", "html-eex", "heex", "jade", "leaf", "liquid", "markdown", "mdx", "mustache", "njk", "nunjucks", "php", "razor", "slim", "twig", "css", "less", "postcss", "sass", "scss", "stylus", "sugarss", "javascript", "javascriptreact", "reason", "rescript", "typescript", "typescriptreact", "vue", "svelte" }
- ```
- - `init_options` :
- ```lua
- {
- userLanguages = {
- eelixir = "html-eex",
- eruby = "erb"
- }
- }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- root_pattern('tailwind.config.js', 'tailwind.config.ts', 'postcss.config.js', 'postcss.config.ts', 'package.json', 'node_modules', '.git')
- ```
- - `settings` :
- ```lua
- {
- tailwindCSS = {
- classAttributes = { "class", "className", "classList", "ngClass" },
- lint = {
- cssConflict = "warning",
- invalidApply = "error",
- invalidConfigPath = "error",
- invalidScreen = "error",
- invalidTailwindDirective = "error",
- invalidVariant = "error",
- recommendedVariantOrder = "warning"
- },
- validate = true
- }
- }
- ```
-
-
-## taplo
-
-https://taplo.tamasfe.dev/lsp/
-
-Language server for Taplo, a TOML toolkit.
-
-`taplo-cli` can be installed via `cargo`:
-```sh
-cargo install --locked taplo-cli
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.taplo.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "taplo", "lsp", "stdio" }
- ```
- - `filetypes` :
- ```lua
- { "toml" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("*.toml", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## teal_ls
-
-https://github.com/teal-language/teal-language-server
-
-Install with:
-```
-luarocks install --dev teal-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.teal_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "teal-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "teal" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("tlconfig.lua", ".git")
- ```
-
-
-## terraform_lsp
-
-https://github.com/juliosueiras/terraform-lsp
-
-Terraform language server
-Download a released binary from
-https://github.com/juliosueiras/terraform-lsp/releases.
-
-From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp:
-
-Both HashiCorp and the maintainer of terraform-lsp expressed interest in
-collaborating on a language server and are working towards a _long-term_
-goal of a single stable and feature-complete implementation.
-
-For the time being both projects continue to exist, giving users the
-choice:
-
-- `terraform-ls` providing
- - overall stability (by relying only on public APIs)
- - compatibility with any provider and any Terraform >=0.12.0 currently
- less features
- - due to project being younger and relying on public APIs which may
- not offer the same functionality yet
-
-- `terraform-lsp` providing
- - currently more features
- - compatibility with a single particular Terraform (0.12.20 at time of writing)
- - configs designed for other 0.12 versions may work, but interpretation may be inaccurate
- - less stability (due to reliance on Terraform's own internal packages)
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.terraform_lsp.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "terraform-lsp" }
- ```
- - `filetypes` :
- ```lua
- { "terraform", "hcl" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".terraform", ".git")
- ```
-
-
-## terraformls
-
-https://github.com/hashicorp/terraform-ls
-
-Terraform language server
-Download a released binary from https://github.com/hashicorp/terraform-ls/releases.
-
-From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp:
-
-Both HashiCorp and the maintainer of terraform-lsp expressed interest in
-collaborating on a language server and are working towards a _long-term_
-goal of a single stable and feature-complete implementation.
-
-For the time being both projects continue to exist, giving users the
-choice:
-
-- `terraform-ls` providing
- - overall stability (by relying only on public APIs)
- - compatibility with any provider and any Terraform >=0.12.0 currently
- less features
- - due to project being younger and relying on public APIs which may
- not offer the same functionality yet
-
-- `terraform-lsp` providing
- - currently more features
- - compatibility with a single particular Terraform (0.12.20 at time of writing)
- - configs designed for other 0.12 versions may work, but interpretation may be inaccurate
- - less stability (due to reliance on Terraform's own internal packages)
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.terraformls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "terraform-ls", "serve" }
- ```
- - `filetypes` :
- ```lua
- { "terraform" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".terraform", ".git")
- ```
-
-
-## texlab
-
-https://github.com/latex-lsp/texlab
-
-A completion engine built from scratch for (La)TeX.
-
-See https://github.com/latex-lsp/texlab/blob/master/docs/options.md for configuration options.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.texlab.setup{}
-```
-**Commands:**
-- TexlabBuild: Build the current buffer
-- TexlabForward: Forward search from current position
-
-**Default values:**
- - `cmd` :
- ```lua
- { "texlab" }
- ```
- - `filetypes` :
- ```lua
- { "tex", "bib" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {
- texlab = {
- auxDirectory = ".",
- bibtexFormatter = "texlab",
- build = {
- args = { "-pdf", "-interaction=nonstopmode", "-synctex=1", "%f" },
- executable = "latexmk",
- forwardSearchAfter = false,
- onSave = false
- },
- chktex = {
- onEdit = false,
- onOpenAndSave = false
- },
- diagnosticsDelay = 300,
- formatterLineLength = 80,
- forwardSearch = {
- args = {}
- },
- latexFormatter = "latexindent",
- latexindent = {
- modifyLineBreaks = false
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## tflint
-
-https://github.com/terraform-linters/tflint
-
-A pluggable Terraform linter that can act as lsp server.
-Installation instructions can be found in https://github.com/terraform-linters/tflint#installation.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.tflint.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "tflint", "--langserver" }
- ```
- - `filetypes` :
- ```lua
- { "terraform" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".terraform", ".git", ".tflint.hcl")
- ```
-
-
-## theme_check
-
-https://github.com/Shopify/shopify-cli
-
-`theme-check-language-server` is bundled with `shopify-cli` or it can also be installed via
-
-https://github.com/Shopify/theme-check#installation
-
-**NOTE:**
-If installed via Homebrew, `cmd` must be set to 'theme-check-liquid-server'
-
-```lua
-require lspconfig.theme_check.setup {
- cmd = { 'theme-check-liquid-server' }
-}
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.theme_check.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "theme-check-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "liquid" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
- - `settings` :
- ```lua
- {}
- ```
-
-
-## tsserver
-
-https://github.com/theia-ide/typescript-language-server
-
-`typescript-language-server` depends on `typescript`. Both packages can be installed via `npm`:
-```sh
-npm install -g typescript typescript-language-server
-```
-
-To configure type language server, add a
-[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or
-[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your
-project.
-
-Here's an example that disables type checking in JavaScript files.
-
-```json
-{
- "compilerOptions": {
- "module": "commonjs",
- "target": "es6",
- "checkJs": false
- },
- "exclude": [
- "node_modules"
- ]
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.tsserver.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "typescript-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" }
- ```
- - `init_options` :
- ```lua
- {
- hostInfo = "neovim"
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git")
- ```
-
-
-## typeprof
-
-https://github.com/ruby/typeprof
-
-`typeprof` is the built-in analysis and LSP tool for Ruby 3.1+.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.typeprof.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "typeprof", "--lsp", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "ruby", "eruby" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("Gemfile", ".git")
- ```
-
-
-## vala_ls
-
-https://github.com/Prince781/vala-language-server
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.vala_ls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vala-language-server" }
- ```
- - `filetypes` :
- ```lua
- { "vala", "genie" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("meson.build", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## vdmj
-
-https://github.com/nickbattle/vdmj
-
-The VDMJ language server can be installed by cloning the VDMJ repository and
-running `mvn clean install`.
-
-Various options are provided to configure the language server (see below). In
-particular:
-- `annotation_paths` is a list of folders and/or jar file paths for annotations
-that should be used with the language server;
-- any value of `debugger_port` less than zero will disable the debugger; note
-that if a non-zero value is used, only one instance of the server can be active
-at a time.
-
-More settings for VDMJ can be changed in a file called `vdmj.properties` under
-`root_dir/.vscode`. For a description of the available settings, see
-[Section 7 of the VDMJ User Guide](https://raw.githubusercontent.com/nickbattle/vdmj/master/vdmj/documentation/UserGuide.pdf).
-
-Note: proof obligations and combinatorial testing are not currently supported
-by neovim.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.vdmj.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- Generated from the options given
- ```
- - `filetypes` :
- ```lua
- { "vdmsl", "vdmpp", "vdmrt" }
- ```
- - `options` :
- ```lua
- {
- annotation_paths = {},
- debugger_port = -1,
- high_precision = false,
- java = "$JAVA_HOME/bin/java",
- java_opts = { "-Xmx3000m", "-Xss1m" },
- logfile = "path.join(vim.fn.stdpath 'cache', 'vdm-lsp.log')",
- mavenrepo = "$HOME/.m2/repository/com/fujitsu",
- version = "The latest version installed in `mavenrepo`"
- }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor(fname) or find_vscode_ancestor(fname)
- ```
-
-
-## verible
-
-https://github.com/chipsalliance/verible
-
-A linter and formatter for verilog and SystemVerilog files.
-
-Release binaries can be downloaded from [here](https://github.com/chipsalliance/verible/releases)
-and placed in a directory on PATH.
-
-See https://github.com/chipsalliance/verible/tree/master/verilog/tools/ls/README.md for options.
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.verible.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "verible-verilog-ls" }
- ```
- - `filetypes` :
- ```lua
- { "systemverilog", "verilog" }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## vimls
-
-https://github.com/iamcco/vim-language-server
-
-You can install vim-language-server via npm:
-```sh
-npm install -g vim-language-server
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.vimls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vim-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "vim" }
- ```
- - `init_options` :
- ```lua
- {
- diagnostic = {
- enable = true
- },
- indexes = {
- count = 3,
- gap = 100,
- projectRootPatterns = { "runtime", "nvim", ".git", "autoload", "plugin" },
- runtimepath = true
- },
- iskeyword = "@,48-57,_,192-255,-#",
- runtimepath = "",
- suggest = {
- fromRuntimepath = true,
- fromVimruntime = true
- },
- vimruntime = ""
- }
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## vls
-
-https://github.com/vlang/vls
-
-V language server.
-
-`v-language-server` can be installed by following the instructions [here](https://github.com/vlang/vls#installation).
-
-**By default, v-language-server doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped and compiled v-language-server.
-
-```lua
--- set the path to the vls installation;
-local vls_root_path = vim.fn.stdpath('cache')..'/lspconfig/vls'
-local vls_binary = vls_root_path.."/cmd/vls/vls"
-
-require'lspconfig'.vls.setup {
- cmd = {vls_binary},
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.vls.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "vlang" }
- ```
- - `root_dir` :
- ```lua
- root_pattern("v.mod", ".git")
- ```
-
-
-## volar
-
-https://github.com/johnsoncodehk/volar/tree/master/packages/vue-language-server
-
-Volar language server for Vue
-
-Volar can be installed via npm:
-
-```sh
-npm install -g @volar/vue-language-server
-```
-
-Volar by default supports Vue 3 projects. Vue 2 projects need [additional configuration](https://github.com/johnsoncodehk/volar/blob/master/extensions/vscode-vue-language-features/README.md?plain=1#L28-L63).
-
-**Take Over Mode**
-Volar can serve as a language server for both Vue and TypeScript via [Take Over Mode](https://github.com/johnsoncodehk/volar/discussions/471).
-
-To enable Take Over Mode, override the default filetypes in `setup{}` as follows:
-
-```lua
-require'lspconfig'.volar.setup{
- filetypes = {'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue', 'json'}
-}
-```
-
-**Overriding the default TypeScript Server used by Volar**
-The default config looks for TS in the local node_modules. The alternatives are:
-
-- use a global TypeScript Server installation
-
-```lua
-require'lspconfig'.volar.setup{
- init_options = {
- typescript = {
- serverPath = '/path/to/.npm/lib/node_modules/typescript/lib/tsserverlib.js'
- }
- }
-}
-```
-
-- use a global TypeScript Server installation if a local server is not found
-
-```lua
-local util = require 'lspconfig.util'
-
-local function get_typescript_server_path(root_dir)
- local project_root = util.find_node_modules_ancestor(root_dir)
-
- local local_tsserverlib = project_root ~= nil and util.path.join(project_root, 'node_modules', 'typescript', 'lib', 'tsserverlibrary.js')
- local global_tsserverlib = '/home/[yourusernamehere]/.npm/lib/node_modules/typescript/lib/tsserverlibrary.js'
-
- if local_tsserverlib and util.path.exists(local_tsserverlib) then
- return local_tsserverlib
- else
- return global_tsserverlib
- end
-end
-
-require'lspconfig'.volar.setup{
- on_new_config = function(new_config, new_root_dir)
- new_config.init_options.typescript.serverPath = get_typescript_server_path(new_root_dir)
- end,
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.volar.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vue-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "vue" }
- ```
- - `init_options` :
- ```lua
- {
- documentFeatures = {
- documentColor = false,
- documentFormatting = {
- defaultPrintWidth = 100
- },
- documentSymbol = true,
- foldingRange = true,
- linkedEditingRange = true,
- selectionRange = true
- },
- languageFeatures = {
- callHierarchy = true,
- codeAction = true,
- codeLens = true,
- completion = {
- defaultAttrNameCase = "kebabCase",
- defaultTagNameCase = "both"
- },
- definition = true,
- diagnostics = true,
- documentHighlight = true,
- documentLink = true,
- hover = true,
- implementation = true,
- references = true,
- rename = true,
- renameFileRefactoring = true,
- schemaRequestService = true,
- semanticTokens = false,
- signatureHelp = true,
- typeDefinition = true
- },
- typescript = {
- serverPath = ""
- }
- }
- ```
- - `on_new_config` :
- ```lua
- see source file
- ```
- - `root_dir` :
- ```lua
- see source file
- ```
-
-
-## vuels
-
-https://github.com/vuejs/vetur/tree/master/server
-
-Vue language server(vls)
-`vue-language-server` can be installed via `npm`:
-```sh
-npm install -g vls
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.vuels.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "vls" }
- ```
- - `filetypes` :
- ```lua
- { "vue" }
- ```
- - `init_options` :
- ```lua
- {
- config = {
- css = {},
- emmet = {},
- html = {
- suggest = {}
- },
- javascript = {
- format = {}
- },
- stylusSupremacy = {},
- typescript = {
- format = {}
- },
- vetur = {
- completion = {
- autoImport = false,
- tagCasing = "kebab",
- useScaffoldSnippets = false
- },
- format = {
- defaultFormatter = {
- js = "none",
- ts = "none"
- },
- defaultFormatterOptions = {},
- scriptInitialIndent = false,
- styleInitialIndent = false
- },
- useWorkspaceDependencies = false,
- validation = {
- script = true,
- style = true,
- template = true
- }
- }
- }
- }
- ```
- - `root_dir` :
- ```lua
- root_pattern("package.json", "vue.config.js")
- ```
-
-
-## yamlls
-
-https://github.com/redhat-developer/yaml-language-server
-
-`yaml-language-server` can be installed via `yarn`:
-```sh
-yarn global add yaml-language-server
-```
-
-To use a schema for validation, there are two options:
-
-1. Add a modeline to the file. A modeline is a comment of the form:
-
-```
-# yaml-language-server: $schema=<urlToTheSchema|relativeFilePath|absoluteFilePath}>
-```
-
-where the relative filepath is the path relative to the open yaml file, and the absolute filepath
-is the filepath relative to the filesystem root ('/' on unix systems)
-
-2. Associated a schema url, relative , or absolute (to root of project, not to filesystem root) path to
-the a glob pattern relative to the detected project root. Check `:LspInfo` to determine the resolved project
-root.
-
-```lua
-require('lspconfig').yamlls.setup {
- ... -- other configuration for setup {}
- settings = {
- yaml = {
- ... -- other settings. note this overrides the lspconfig defaults.
- schemas = {
- ["https://json.schemastore.org/github-workflow.json"] = "/.github/workflows/*"
- ["../path/relative/to/file.yml"] = "/.github/workflows/*"
- ["/path/from/root/of/project"] = "/.github/workflows/*"
- },
- },
- }
-}
-```
-
-Currently, kubernetes is special-cased in yammls, see the following upstream issues:
-* [#211](https://github.com/redhat-developer/yaml-language-server/issues/211).
-* [#307](https://github.com/redhat-developer/yaml-language-server/issues/307).
-
-To override a schema to use a specific k8s schema version (for example, to use 1.18):
-
-```lua
-require('lspconfig').yamlls.setup {
- ... -- other configuration for setup {}
- settings = {
- yaml = {
- ... -- other settings. note this overrides the lspconfig defaults.
- schemas = {
- ["https://raw.githubusercontent.com/instrumenta/kubernetes-json-schema/master/v1.18.0-standalone-strict/all.json"] = "/*.k8s.yaml",
- ... -- other schemas
- },
- },
- }
-}
-```
-
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.yamlls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "yaml-language-server", "--stdio" }
- ```
- - `filetypes` :
- ```lua
- { "yaml", "yaml.docker-compose" }
- ```
- - `root_dir` :
- ```lua
- util.find_git_ancestor
- ```
- - `settings` :
- ```lua
- {
- redhat = {
- telemetry = {
- enabled = false
- }
- }
- }
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-## zeta_note
-
-https://github.com/artempyanykh/zeta-note
-
-Markdown LSP server for easy note-taking with cross-references and diagnostics.
-
-Binaries can be downloaded from https://github.com/artempyanykh/zeta-note/releases
-
-**By default, zeta-note doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your zeta-note binary.
-
-```lua
-require'lspconfig'.zeta_note.setup{
- cmd = {'path/to/zeta-note'}
-}
-```
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.zeta_note.setup{}
-```
-
-
-**Default values:**
- - `filetypes` :
- ```lua
- { "markdown" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".zeta.toml")
- ```
-
-
-## zk
-
-github.com/mickael-menu/zk
-
-A plain text note-taking assistant
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.zk.setup{}
-```
-**Commands:**
-- ZkIndex: Index
-- ZkNew: ZkNew
-
-**Default values:**
- - `cmd` :
- ```lua
- { "zk", "lsp" }
- ```
- - `filetypes` :
- ```lua
- { "markdown" }
- ```
- - `root_dir` :
- ```lua
- root_pattern(".zk")
- ```
-
-
-## zls
-
-https://github.com/zigtools/zls
-
-Zig LSP implementation + Zig Language Server
-
-
-
-**Snippet to enable the language server:**
-```lua
-require'lspconfig'.zls.setup{}
-```
-
-
-**Default values:**
- - `cmd` :
- ```lua
- { "zls" }
- ```
- - `filetypes` :
- ```lua
- { "zig", "zir" }
- ```
- - `root_dir` :
- ```lua
- util.root_pattern("zls.json", ".git")
- ```
- - `single_file_support` :
- ```lua
- true
- ```
-
-
-
-vim:ft=markdown