diff options
Diffstat (limited to 'start')
358 files changed, 37780 insertions, 15663 deletions
diff --git a/start/indent-blankline-2.20.4/LICENSE.md b/start/indent-blankline-2.20.4/LICENSE.md new file mode 100644 index 0000000..7074561 --- /dev/null +++ b/start/indent-blankline-2.20.4/LICENSE.md @@ -0,0 +1,21 @@ +The MIT Licence + +Copyright (c) 2022 Lukas Reineke + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/start/indent-blankline-2.20.4/doc/indent_blankline.txt b/start/indent-blankline-2.20.4/doc/indent_blankline.txt new file mode 100644 index 0000000..d3975e8 --- /dev/null +++ b/start/indent-blankline-2.20.4/doc/indent_blankline.txt @@ -0,0 +1,784 @@ +*indent_blankline.txt* Show vertical lines for indent on empty lines + + +Author: Lukas Reineke <lukas.reineke@protonmail.com> +Version: 2.20.4 + +============================================================================== +CONTENTS *indent-blankline* + + 1. Introduction |indent-blankline-introduction| + 2. Highlights |indent-blankline-highlights| + 3. Setup |indent-blankline-setup| + 4. Variables |indent-blankline-variables| + 5. Commands |indent-blankline-commands| + 6. License |indent-blankline-license| + +============================================================================== + 1. INTRODUCTION *indent-blankline-introduction* + +This plugin adds indentation guides to all lines (including empty lines). + +It uses Neovim's virtual text feature and **no conceal** + +This plugin requires Neovim 0.5 or higher. It makes use of Neovim only +features so it will not work in Vim. +There is a legacy version of the plugin that supports Neovim 0.4 under the +branch `version-1` + +============================================================================== + 2. HIGHLIGHTS *indent-blankline-highlights* + +To change the highlighting of either the indent character, or the whitespace +between indent characters, define or update these highlight groups. + +------------------------------------------------------------------------------ +IndentBlanklineChar *hl-IndentBlanklineChar* + + Highlight of indent character. + + Default: takes guifg color from 'Whitespace' ~ + + Example: > + + highlight IndentBlanklineChar guifg=#00FF00 gui=nocombine + +------------------------------------------------------------------------------ +IndentBlanklineSpaceChar *hl-IndentBlanklineSpaceChar* + + Highlight of space character. + + Default: takes guifg color from 'Whitespace' ~ + + Example: > + + highlight IndentBlanklineSpaceChar guifg=#00FF00 gui=nocombine + +------------------------------------------------------------------------------ +IndentBlanklineSpaceCharBlankline *hl-IndentBlanklineSpaceCharBlankline* + + Highlight of space character on blank lines. + + Default: takes guifg color from 'Whitespace' ~ + + Example: > + + highlight IndentBlanklineSpaceCharBlankline guifg=#00FF00 gui=nocombine + +------------------------------------------------------------------------------ +IndentBlanklineContextChar *hl-IndentBlanklineContextChar* + + Highlight of indent character when base of current context. + Only used when |g:indent_blankline_show_current_context| is active + + Default: takes guifg color from 'Label' ~ + + Example: > + + highlight IndentBlanklineContextChar guifg=#00FF00 gui=nocombine + +------------------------------------------------------------------------------ +IndentBlanklineContextSpaceChar *hl-IndentBlanklineContextSpaceChar* + + Highlight of space characters one indent level of the current context. + Only used when |g:indent_blankline_show_current_context| is active + + Default: takes guifg color from 'Label' ~ + + Example: > + + highlight IndentBlanklineContextSpaceChar guifg=#00FF00 gui=nocombine + +------------------------------------------------------------------------------ +IndentBlanklineContextStart *hl-IndentBlanklineContextStart* + + Highlight of the first line of the current context. + Only used when |g:indent_blankline_show_current_context_start| is active + + Default: takes guifg color from 'Label' as guisp and adds underline ~ + + Note: You need to have set |gui-colors| for the default to work. + + Example: > + + highlight IndentBlanklineContextStart guisp=#00FF00 gui=underline + +------------------------------------------------------------------------------ + +Note: Define your highlight group after setting colorscheme or your colorscheme will clear your highlight group + +When defining the highlight group, it is important to set |nocombine| as a +gui option. This is to make sure the character does not inherit gui options +from the underlying text, like italic or bold. + +Highlight groups get reset on |ColorScheme| autocommand, if both fg and bg +are empty. + +The set more than one highlight group that changes based on indentation level, +see: +|g:indent_blankline_char_highlight_list| +|g:indent_blankline_space_char_highlight_list| +|g:indent_blankline_space_char_blankline_highlight_list| + +============================================================================== + 3. SETUP *indent-blankline-setup* + +To configure indent-blankline, either run the setup function, or set variables +manually. +The setup function has a single table as argument, keys of the table match the +|indent-blankline-variables| without the `indent_blankline_` part. + +Example: > + + require("indent_blankline").setup { + -- for example, context is off by default, use this to turn it on + show_current_context = true, + show_current_context_start = true, + } + +============================================================================== + 4. VARIABLES *indent-blankline-variables* + +All variables can be set globally |g:var|, per tab |t:var|, or per buffer |b:var| + +------------------------------------------------------------------------------ +g:indent_blankline_char *g:indent_blankline_char* + + Specifies the character to be used as indent line. + Not used if |g:indent_blankline_char_list| is not empty. + + When set explicitly to empty string (""), no indentation character is + displayed at all, even when |g:indent_blankline_char_list| is not empty. + This can be useful in combination with + |g:indent_blankline_space_char_highlight_list| to only rely on different + highlighting of different indentation levels without needing to show a + special character. + + Also set by |g:indentLine_char| + + Default: '│' ~ + + Example: > + + let g:indent_blankline_char = '|' + +------------------------------------------------------------------------------ +g:indent_blankline_char_blankline *g:indent_blankline_char_blankline* + + Specifies the character to be used as indent line for blanklines. + Not used if |g:indent_blankline_char_list_blankline| is not empty. + + Default: '' ~ + + Example: > + + let g:indent_blankline_char_blankline = '┆' + +------------------------------------------------------------------------------ +g:indent_blankline_char_list *g:indent_blankline_char_list* + + Specifies a list of characters to be used as indent line for + each indentation level. + Ignored if the value is an empty list. + + Also set by |g:indentLine_char_list| + + Default: [] ~ + + Example: > + + let g:indent_blankline_char_list = ['|', '¦', '┆', '┊'] + +------------------------------------------------------------------------------ +g:indent_blankline_char_list_blankline *g:indent_blankline_char_list_blankline* + + Specifies a list of characters to be used as indent line for + each indentation level on blanklines. + Ignored if the value is an empty list. + + Default: [] ~ + + Example: > + + let g:indent_blankline_char_list_blankline = ['|', '¦', '┆', '┊'] + +------------------------------------------------------------------------------ + +g:indent_blankline_char_highlight_list *g:indent_blankline_char_highlight_list* + + Specifies the list of character highlights for each indentation level. + Ignored if the value is an empty list. + + Default: [] ~ + + Example: > + + let g:indent_blankline_char_highlight_list = ['Error', 'Function'] + +------------------------------------------------------------------------------ +g:indent_blankline_space_char_blankline *g:indent_blankline_space_char_blankline* + + Specifies the character to be used as the space value in between indent + lines when the line is blank. + + Default: An empty space character ~ + + Example: > + + let g:indent_blankline_space_char_blankline = ' ' + +------------------------------------------------------------------------------ + +g:indent_blankline_space_char_highlight_list *g:indent_blankline_space_char_highlight_list* + + Specifies the list of space character highlights for each indentation + level. + Ignored if the value is an empty list. + + Default: [] ~ + + Example: > + + let g:indent_blankline_space_char_highlight_list = ['Error', 'Function'] + +------------------------------------------------------------------------------ + +g:indent_blankline_space_char_blankline_highlight_list *g:indent_blankline_space_char_blankline_highlight_list* + + Specifies the list of space character highlights for each indentation + level when the line is empty. + Ignored if the value is an empty list. + + Also set by |g:indent_blankline_space_char_highlight_list| + + Default: [] ~ + + Example: > + + let g:indent_blankline_space_char_blankline_highlight_list = ['Error', 'Function'] + +------------------------------------------------------------------------------ +g:indent_blankline_use_treesitter *g:indent_blankline_use_treesitter* + + Use treesitter to calculate indentation when possible. + Requires treesitter + + Default: false ~ + + Example: > + + let g:indent_blankline_use_treesitter = v:true + +------------------------------------------------------------------------------ +g:indent_blankline_indent_level *g:indent_blankline_indent_level* + + Specifies the maximum indent level to display. + + Also set by |g:indentLine_indentLevel| + + Default: 10 ~ + + Example: > + + let g:indent_blankline_indent_level = 4 + +------------------------------------------------------------------------------ +g:indent_blankline_max_indent_increase *g:indent_blankline_max_indent_increase* + + The maximum indent level increase from line to line. + Set this option to 1 to make aligned trailing multiline comments not + create indentation. + + Default: g:indent_blankline_indent_level ~ + + Example: > + + let g:indent_blankline_max_indent_increase = 1 + +------------------------------------------------------------------------------ +g:indent_blankline_show_first_indent_level *g:indent_blankline_show_first_indent_level* + + Displays indentation in the first column. + + Default: v:true ~ + + Example: > + + let g:indent_blankline_show_first_indent_level = v:false + +------------------------------------------------------------------------------ +g:indent_blankline_show_trailing_blankline_indent *g:indent_blankline_show_trailing_blankline_indent* + + Displays a trailing indentation guide on blank lines, to match the + indentation of surrounding code. + Turn this off if you want to use background highlighting instead of chars. + + Default: v:true ~ + + Example: > + + let g:indent_blankline_show_trailing_blankline_indent = v:false + +------------------------------------------------------------------------------ +g:indent_blankline_show_end_of_line *g:indent_blankline_show_end_of_line* + + Displays the end of line character set by |listchars| instead of the + indent guide on line returns. + + Default: v:false ~ + + Example: > + + let g:indent_blankline_show_end_of_line = v:true + +------------------------------------------------------------------------------ +g:indent_blankline_show_foldtext *g:indent_blankline_show_foldtext* + + Displays the full fold text instead of the indent guide on folded lines. + + Note: there is no autocommand to subscribe to changes in folding. This + might lead to unexpected results. A possible solution for this is to + remap folding bindings to also call |IndentBlanklineRefresh| + + Default: v:true ~ + + Example: > + + let g:indent_blankline_show_foldtext = v:false + +------------------------------------------------------------------------------ +g:indent_blankline_enabled *g:indent_blankline_enabled* + + Turns this plugin on or off. + + Also set by |g:indentLine_enabled| + + Note: the buffer version of this variable overwrites all other + enabled/disabled checks. + + Default: v:true ~ + + Example: > + + let g:indent_blankline_enabled = v:false + +------------------------------------------------------------------------------ +g:indent_blankline_disable_with_nolist *g:indent_blankline_disable_with_nolist* + + When true, automatically turns this plugin off when |nolist| is set. + When false, setting |nolist| will keep displaying indentation guides but + removes whitespace characters set by |listchars|. + + Default: v:false ~ + + Example: > + + let g:indent_blankline_disable_with_nolist = v:true + +------------------------------------------------------------------------------ +g:indent_blankline_filetype *g:indent_blankline_filetype* + + Specifies a list of |filetype| values for which this plugin is enabled. + All |filetypes| are enabled if the value is an empty list. + + Also set by |g:indentLine_fileType| + + Default: [] ~ + + Example: > + + let g:indent_blankline_filetype = ['vim'] + +------------------------------------------------------------------------------ +g:indent_blankline_filetype_exclude *g:indent_blankline_filetype_exclude* + + Specifies a list of |filetype| values for which this plugin is not enabled. + Ignored if the value is an empty list. + + Also set by |g:indentLine_fileTypeExclude| + + Default: [ ~ + "lspinfo", ~ + "packer", ~ + "checkhealth", ~ + "help", ~ + "man", ~ + "", ~ + ] ~ + + Example: > + + let g:indent_blankline_filetype_exclude = ['help'] + +------------------------------------------------------------------------------ +g:indent_blankline_buftype_exclude *g:indent_blankline_buftype_exclude* + + Specifies a list of |buftype| values for which this plugin is not enabled. + Ignored if the value is an empty list. + + Also set by |g:indentLine_bufTypeExclude| + + Default: [ ~ + "terminal", ~ + "nofile", ~ + "quickfix", ~ + "prompt", ~ + ] ~ + + Example: > + + let g:indent_blankline_buftype_exclude = ['terminal'] + +------------------------------------------------------------------------------ +g:indent_blankline_bufname_exclude *g:indent_blankline_bufname_exclude* + + Specifies a list of buffer names (file name with full path) for which + this plugin is not enabled. + A name can be regular expression as well. + + Also set by |g:indentLine_bufNameExclude| + + Default: [] ~ + + Example: > + + let g:indent_blankline_bufname_exclude = ['README.md', '.*\.py'] + +------------------------------------------------------------------------------ +g:indent_blankline_strict_tabs *g:indent_blankline_strict_tabs* + + When on, if there is a single tab in a line, only tabs are used to + calculate the indentation level. + When off, both spaces and tabs are used to calculate the indentation + level. + Only makes a difference if a line has a mix of tabs and spaces for + indentation. + + Default: v:false ~ + + Example: > + + let g:indent_blankline_strict_tabs = v:true + +------------------------------------------------------------------------------ +g:indent_blankline_show_current_context *g:indent_blankline_show_current_context* + + When on, use treesitter to determine the current context. Then show the + indent character in a different highlight. + + Note: Requires https://github.com/nvim-treesitter/nvim-treesitter to be + installed + + Note: With this option enabled, the plugin refreshes on |CursorMoved|, + which might be slower + + Default: v:false ~ + + Example: > + + let g:indent_blankline_show_current_context = v:true + +------------------------------------------------------------------------------ +g:indent_blankline_show_current_context_start *g:indent_blankline_show_current_context_start* + + Applies the |hl-IndentBlanklineContextStart| highlight group to the first + line of the current context. + By default this will underline. + + Note: Requires https://github.com/nvim-treesitter/nvim-treesitter to be + installed + + Note: You need to have set |gui-colors| and it depends on your terminal + emulator if this works as expected. + If you are using kitty and tmux, take a look at this article to + make it work + http://evantravers.com/articles/2021/02/05/curly-underlines-in-kitty-tmux-neovim/ + + Default: v:false ~ + + Example: > + + let g:indent_blankline_show_current_context_start = v:true + +------------------------------------------------------------------------------ +g:indent_blankline_show_current_context_start_on_current_line *g:indent_blankline_show_current_context_start_on_current_line* + + Shows |g:indent_blankline_show_current_context_start| even when the cursor + is on the same line + + Default: v:true ~ + + Example: > + + let g:indent_blankline_show_current_context_start_on_current_line = v:false + +------------------------------------------------------------------------------ +g:indent_blankline_context_char *g:indent_blankline_context_char* + + Specifies the character to be used for the current context indent line. + Not used if |g:indent_blankline_context_char_list| is not empty. + + Useful to have a greater distinction between the current context indent + line and others. + + Also useful in combination with |g:indent_blankline_char| set to empty string + (""), as this allows only the current context indent line to be shown. + + Default: g:indent_blankline_char ~ + + Example: > + + let g:indent_blankline_context_char = '┃' + +------------------------------------------------------------------------------ +g:indent_blankline_context_char_blankline *g:indent_blankline_context_char_blankline* + + Equivalent of |g:indent_blankline_char_blankline| for + |g:indent_blankline_context_char|. + + Default: '' ~ + + Example: > + + let g:indent_blankline_context_char_blankline = '┆' + +------------------------------------------------------------------------------ +g:indent_blankline_context_char_list *g:indent_blankline_context_char_list* + + Equivalent of |g:indent_blankline_char_list| for + |g:indent_blankline_context_char|. + + Default: [] ~ + + Example: > + + let g:indent_blankline_context_char_list = ['┃', '║', '╬', '█'] + +------------------------------------------------------------------------------ +g:indent_blankline_context_char_list_blankline *g:indent_blankline_context_char_list_blankline* + + Equivalent of |g:indent_blankline_char_list_blankline| for + |g:indent_blankline_context_char_blankline|. + + Default: [] ~ + + Example: > + + let g:indent_blankline_context_char_list_blankline = ['┃', '║', '╬', '█'] + +------------------------------------------------------------------------------ +g:indent_blankline_context_highlight_list *g:indent_blankline_context_highlight_list* + + Specifies the list of character highlights for the current context at + each indentation level. + Ignored if the value is an empty list. + + Only used when |g:indent_blankline_show_current_context| is active + + Default: [] ~ + + Example: > + + let g:indent_blankline_context_highlight_list = ['Error', 'Warning'] + +------------------------------------------------------------------------------ +g:indent_blankline_char_priority *g:indent_blankline_char_priority* + + Specifies the |extmarks| priority for chars. + + Default: 1 ~ + + Example: > + + let g:indent_blankline_char_priority = 50 + +------------------------------------------------------------------------------ +g:indent_blankline_context_start_priority *g:indent_blankline_context_start_priority* + + Specifies the |extmarks| priority for the context start. + + Default: 10000 ~ + + Example: > + + let g:indent_blankline_context_start_priority = 50 + +------------------------------------------------------------------------------ +g:indent_blankline_context_patterns *g:indent_blankline_context_patterns* + + Specifies a list of lua patterns that are used to match against the + treesitter |tsnode:type()| at the cursor position to find the current + context. + + To learn more about how lua pattern work, see here: + https://www.lua.org/manual/5.1/manual.html#5.4.1 + + Only used when |g:indent_blankline_show_current_context| is active + + Default: [ ~ + "class", ~ + "^func", ~ + "method", ~ + "^if", ~ + "while", ~ + "for", ~ + "with", ~ + "try", ~ + "except", ~ + "arguments", ~ + "argument_list", ~ + "object", ~ + "dictionary", ~ + "element", ~ + "table", ~ + "tuple", ~ + "do_block", ~ + ] ~ + + Example: > + + let g:indent_blankline_context_patterns = ['^if'] + +------------------------------------------------------------------------------ +g:indent_blankline_use_treesitter_scope *g:indent_blankline_use_treesitter_scope* + + Instead of using |g:indent_blankline_context_patterns|, use the current + scope defined by nvim-treesitter as the context. + + Default: false ~ + + Example: > + + let g:indent_blankline_use_treesitter_scope = true + +------------------------------------------------------------------------------ +g:indent_blankline_context_pattern_highlight *g:indent_blankline_context_pattern_highlight* + + Specifies a map of patterns set in + |g:indent_blankline_context_patterns| to highlight groups. + When the current matching context pattern is in the map, the context + will be highlighted with the corresponding highlight group. + + Only used when |g:indent_blankline_show_current_context| is active + + Default: {} ~ + + Example: > + + let g:indent_blankline_context_pattern_highlight = {'function': 'Function'} + +------------------------------------------------------------------------------ +g:indent_blankline_viewport_buffer *g:indent_blankline_viewport_buffer* + + Sets the buffer of extra lines before and after the current viewport that + are considered when generating indentation and the context. + + Default: 10 ~ + + Example: > + + let g:indent_blankline_viewport_buffer = 20 + +------------------------------------------------------------------------------ +g:indent_blankline_disable_warning_message *g:indent_blankline_disable_warning_message* + + Turns deprecation warning messages off. + + Default: v:false ~ + + Example: > + + let g:indent_blankline_disable_warning_message = v:true + +============================================================================== + 5. COMMANDS *indent-blankline-commands* + +------------------------------------------------------------------------------ +:IndentBlanklineRefresh[!] *IndentBlanklineRefresh* + + Refreshes the indent guides for the current buffer. + Run this with |autocmd| when the file changes. For example after a plugin + formats the file. + + With bang (IndentBlanklineRefresh!) refreshes the indent guides globally. + + By default it is run for: + 1. |FileChangedShellPost| * + 2. |TextChanged| * + 3. |TextChangedI| * + 4. |CompleteChanged| * + 5. |BufWinEnter| * + 6. |Filetype| * + 7. |OptionSet| list,listchars,shiftwidth,tabstop,expandtab + + Example: > + + autocmd User ALEFixPost IndentBlanklineRefresh + +------------------------------------------------------------------------------ +:IndentBlanklineRefreshScroll[!] *IndentBlanklineRefreshScroll* + + Refreshes the indent guides for the current buffer. But tries to reuse as + indent guides that already exist. Only used if we are sure the buffer + content did not change. + + With bang (IndentBlanklineRefresh!) refreshes the indent guides globally. + + By default it is run for: + 1. |WinScrolled| * + + Example: > + + autocmd WinScrolled * IndentBlanklineRefreshScroll + +------------------------------------------------------------------------------ +:IndentBlanklineEnable[!] *IndentBlanklineEnable* + + Enables this plugin for the current buffer. + This overwrites any include/exclude rules. + + With bang (IndentBlanklineEnable!) enables this plugin globally + +------------------------------------------------------------------------------ +:IndentBlanklineDisable[!] *IndentBlanklineDisable* + + Disables this plugin for the current buffer. + This overwrites any include/exclude rules. + + With bang (IndentBlanklineDisable!) disables this plugin globally + +------------------------------------------------------------------------------ +:IndentBlanklineToggle[!] *IndentBlanklineToggle* + + Toggles between |IndentBlanklineEnable| and |IndentBlanklineDisable|. + + With bang (IndentBlanklineToggle!) toggles globally + +============================================================================== + 6. LICENSE *indent-blankline-license* + +The MIT Licence +http://www.opensource.org/licenses/mit-license.php + +Copyright (c) 2023 Lukas Reineke + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. + +============================================================================== +vim:tw=78:ts=8:ft=help:norl diff --git a/start/indent-blankline-2.20.4/lua/indent_blankline/commands.lua b/start/indent-blankline-2.20.4/lua/indent_blankline/commands.lua new file mode 100644 index 0000000..263d332 --- /dev/null +++ b/start/indent-blankline-2.20.4/lua/indent_blankline/commands.lua @@ -0,0 +1,58 @@ +local M = {} + +M.refresh = function(bang, scroll) + scroll = scroll or false + if bang then + local win = vim.api.nvim_get_current_win() + vim.cmd(string.format([[noautocmd windo lua require("indent_blankline").refresh(%s)]], tostring(scroll))) + if vim.api.nvim_win_is_valid(win) then + vim.api.nvim_set_current_win(win) + end + else + require("indent_blankline").refresh(scroll) + end +end + +M.enable = function(bang) + if bang then + vim.g.indent_blankline_enabled = true + local win = vim.api.nvim_get_current_win() + vim.cmd [[noautocmd windo lua require("indent_blankline").refresh(false)]] + vim.api.nvim_set_current_win(win) + else + vim.b.indent_blankline_enabled = true + require("indent_blankline").refresh(false) + end +end + +M.disable = function(bang) + if bang then + vim.g.indent_blankline_enabled = false + local buffers = vim.api.nvim_list_bufs() + for _, buffer in pairs(buffers) do + vim.api.nvim_buf_clear_namespace(buffer, vim.g.indent_blankline_namespace, 1, -1) + end + else + vim.b.indent_blankline_enabled = false + vim.b.__indent_blankline_active = false + vim.api.nvim_buf_clear_namespace(0, vim.g.indent_blankline_namespace, 1, -1) + end +end + +M.toggle = function(bang) + if bang then + if vim.g.indent_blankline_enabled then + M.disable(bang) + else + M.enable(bang) + end + else + if vim.b.__indent_blankline_active then + M.disable(bang) + else + M.enable(bang) + end + end +end + +return M diff --git a/start/indent-blankline-2.20.4/lua/indent_blankline/init.lua b/start/indent-blankline-2.20.4/lua/indent_blankline/init.lua new file mode 100644 index 0000000..129458e --- /dev/null +++ b/start/indent-blankline-2.20.4/lua/indent_blankline/init.lua @@ -0,0 +1,651 @@ +local utils = require "indent_blankline/utils" +local M = {} + +local char_highlight = "IndentBlanklineChar" +local space_char_highlight = "IndentBlanklineSpaceChar" +local space_char_blankline_highlight = "IndentBlanklineSpaceCharBlankline" +local context_highlight = "IndentBlanklineContextChar" +local context_space_char_highlight = "IndentBlanklineContextSpaceChar" + +M.init = function() + if not vim.g.indent_blankline_namespace then + vim.g.indent_blankline_namespace = vim.api.nvim_create_namespace "indent_blankline" + end + + utils.reset_highlights() + + require("indent_blankline.commands").refresh(true) +end + +M.setup = function(options) + if options == nil then + options = {} + end + + local o = utils.first_not_nil + + vim.g.indent_blankline_char = o(options.char, vim.g.indent_blankline_char, vim.g.indentLine_char, "│") + vim.g.indent_blankline_char_blankline = o(options.char_blankline, vim.g.indent_blankline_char_blankline) + vim.g.indent_blankline_char_list = + o(options.char_list, vim.g.indent_blankline_char_list, vim.g.indentLine_char_list) + vim.g.indent_blankline_char_list_blankline = + o(options.char_list_blankline, vim.g.indent_blankline_char_list_blankline) + vim.g.indent_blankline_context_char = + o(options.context_char, vim.g.indent_blankline_context_char, vim.g.indent_blankline_char) + vim.g.indent_blankline_context_char_blankline = o( + options.context_char_blankline, + vim.g.indent_blankline_context_char_blankline, + vim.g.indent_blankline_char_blankline + ) + vim.g.indent_blankline_context_char_list = o(options.context_char_list, vim.g.indent_blankline_context_char_list) + vim.g.indent_blankline_context_char_list_blankline = + o(options.context_char_list_blankline, vim.g.indent_blankline_context_char_list) + vim.g.indent_blankline_char_highlight_list = + o(options.char_highlight_list, vim.g.indent_blankline_char_highlight_list) + vim.g.indent_blankline_space_char_highlight_list = + o(options.space_char_highlight_list, vim.g.indent_blankline_space_char_highlight_list) + vim.g.indent_blankline_space_char_blankline = + o(options.space_char_blankline, vim.g.indent_blankline_space_char_blankline, " ") + vim.g.indent_blankline_space_char_blankline_highlight_list = o( + options.space_char_blankline_highlight_list, + vim.g.indent_blankline_space_char_blankline_highlight_list, + options.space_char_highlight_list, + vim.g.indent_blankline_space_char_highlight_list + ) + vim.g.indent_blankline_indent_level = o(options.indent_level, vim.g.indent_blankline_indent_level, 20) + vim.g.indent_blankline_enabled = o(options.enabled, vim.g.indent_blankline_enabled, true) + vim.g.indent_blankline_disable_with_nolist = + o(options.disable_with_nolist, vim.g.indent_blankline_disable_with_nolist, false) + vim.g.indent_blankline_filetype = o(options.filetype, vim.g.indent_blankline_filetype, vim.g.indentLine_fileType) + vim.g.indent_blankline_filetype_exclude = o( + options.filetype_exclude, + vim.g.indent_blankline_filetype_exclude, + vim.g.indentLine_fileTypeExclude, + { "lspinfo", "packer", "checkhealth", "help", "man", "" } + ) + vim.g.indent_blankline_bufname_exclude = + o(options.bufname_exclude, vim.g.indent_blankline_bufname_exclude, vim.g.indentLine_bufNameExclude) + vim.g.indent_blankline_buftype_exclude = o( + options.buftype_exclude, + vim.g.indent_blankline_buftype_exclude, + vim.g.indentLine_bufTypeExclude, + { "terminal", "nofile", "quickfix", "prompt" } + ) + vim.g.indent_blankline_viewport_buffer = o(options.viewport_buffer, vim.g.indent_blankline_viewport_buffer, 10) + vim.g.indent_blankline_use_treesitter = o(options.use_treesitter, vim.g.indent_blankline_use_treesitter, false) + vim.g.indent_blankline_max_indent_increase = o( + options.max_indent_increase, + vim.g.indent_blankline_max_indent_increase, + options.indent_level, + vim.g.indent_blankline_indent_level + ) + vim.g.indent_blankline_show_first_indent_level = + o(options.show_first_indent_level, vim.g.indent_blankline_show_first_indent_level, true) + vim.g.indent_blankline_show_trailing_blankline_indent = + o(options.show_trailing_blankline_indent, vim.g.indent_blankline_show_trailing_blankline_indent, true) + vim.g.indent_blankline_show_end_of_line = + o(options.show_end_of_line, vim.g.indent_blankline_show_end_of_line, false) + vim.g.indent_blankline_show_foldtext = o(options.show_foldtext, vim.g.indent_blankline_show_foldtext, true) + vim.g.indent_blankline_show_current_context = + o(options.show_current_context, vim.g.indent_blankline_show_current_context, false) + vim.g.indent_blankline_show_current_context_start = + o(options.show_current_context_start, vim.g.indent_blankline_show_current_context_start, false) + vim.g.indent_blankline_use_treesitter_scope = + o(options.use_treesitter_scope, vim.g.indent_blankline_use_treesitter_scope, false) + vim.g.indent_blankline_show_current_context_start_on_current_line = o( + options.show_current_context_start_on_current_line, + vim.g.indent_blankline_show_current_context_start_on_current_line, + true + ) + vim.g.indent_blankline_context_highlight_list = + o(options.context_highlight_list, vim.g.indent_blankline_context_highlight_list) + vim.g.indent_blankline_context_patterns = o(options.context_patterns, vim.g.indent_blankline_context_patterns, { + "class", + "^func", + "method", + "^if", + "while", + "for", + "with", + "try", + "except", + "match", + "arguments", + "argument_list", + "object", + "dictionary", + "element", + "table", + "tuple", + "do_block", + }) + vim.g.indent_blankline_context_pattern_highlight = + o(options.context_pattern_highlight, vim.g.indent_blankline_context_pattern_highlight) + vim.g.indent_blankline_strict_tabs = o(options.strict_tabs, vim.g.indent_blankline_strict_tabs, false) + + vim.g.indent_blankline_disable_warning_message = + o(options.disable_warning_message, vim.g.indent_blankline_disable_warning_message, false) + vim.g.indent_blankline_char_priority = o(options.char_priority, vim.g.indent_blankline_char_priority, 1) + vim.g.indent_blankline_context_start_priority = + o(options.context_start_priority, vim.g.indent_blankline_context_start_priority, 10000) + + if vim.g.indent_blankline_show_current_context then + vim.cmd [[ + augroup IndentBlanklineContextAutogroup + autocmd! + autocmd CursorMoved,CursorMovedI * IndentBlanklineRefresh + augroup END + ]] + end + + vim.g.__indent_blankline_setup_completed = true +end + +local refresh = function(scroll) + local v = utils.get_variable + local bufnr = vim.api.nvim_get_current_buf() + + if not vim.api.nvim_buf_is_loaded(bufnr) then + return + end + + if + not utils.is_indent_blankline_enabled( + vim.b.indent_blankline_enabled, + vim.g.indent_blankline_enabled, + v "indent_blankline_disable_with_nolist", + vim.opt.list:get(), + vim.bo.filetype, + v "indent_blankline_filetype" or {}, + v "indent_blankline_filetype_exclude", + vim.bo.buftype, + v "indent_blankline_buftype_exclude" or {}, + v "indent_blankline_bufname_exclude" or {}, + vim.fn["bufname"] "" + ) + then + if vim.b.__indent_blankline_active then + vim.schedule_wrap(utils.clear_buf_indent)(bufnr) + end + vim.b.__indent_blankline_active = false + return + else + vim.b.__indent_blankline_active = true + end + + local win_start = vim.fn.line "w0" + local win_end = vim.fn.line "w$" + local offset = math.max(win_start - 1 - v "indent_blankline_viewport_buffer", 0) + local win_view = vim.fn.winsaveview() + local left_offset = win_view.leftcol + local lnum = win_view.lnum + local left_offset_s = tostring(left_offset) + local range = math.min(win_end + v "indent_blankline_viewport_buffer", vim.api.nvim_buf_line_count(bufnr)) + + if not vim.b.__indent_blankline_ranges then + vim.b.__indent_blankline_ranges = {} + end + + if scroll then + local updated_range + + if vim.b.__indent_blankline_ranges[left_offset_s] then + local blankline_ranges = vim.b.__indent_blankline_ranges[left_offset_s] + local need_to_update = true + + -- find a candidate that could contain the window + local idx_candidate = utils.binary_search_ranges(blankline_ranges, { win_start, win_end }) + local candidate_start, candidate_end = unpack(blankline_ranges[idx_candidate]) + + -- check if the current window is contained or if a new range needs to be created + if candidate_start <= win_start then + if candidate_end >= win_end then + need_to_update = false + else + table.insert(blankline_ranges, idx_candidate + 1, { offset, range }) + end + else + table.insert(blankline_ranges, idx_candidate, { offset, range }) + end + + if not need_to_update then + return + end + + -- merge ranges and update the variable, strategies are: contains or extends + updated_range = utils.merge_ranges(blankline_ranges) + else + updated_range = { { offset, range } } + end + + -- we can't assign directly to a table key, so we update the reference to the variable + local new_ranges = vim.b.__indent_blankline_ranges + new_ranges[left_offset_s] = updated_range + vim.b.__indent_blankline_ranges = new_ranges + else + vim.b.__indent_blankline_ranges = { [left_offset_s] = { { offset, range } } } + end + + local lines = vim.api.nvim_buf_get_lines(bufnr, offset, range, false) + local char = v "indent_blankline_char" + local char_blankline = v "indent_blankline_char_blankline" + local char_list = v "indent_blankline_char_list" or {} + local char_list_blankline = v "indent_blankline_char_list_blankline" or {} + local context_char = v "indent_blankline_context_char" + local context_char_blankline = v "indent_blankline_context_char_blankline" + local context_char_list = v "indent_blankline_context_char_list" or {} + local context_char_list_blankline = v "indent_blankline_context_char_list_blankline" or {} + local char_highlight_list = v "indent_blankline_char_highlight_list" or {} + local space_char_highlight_list = v "indent_blankline_space_char_highlight_list" or {} + local space_char_blankline_highlight_list = v "indent_blankline_space_char_blankline_highlight_list" or {} + local space_char_blankline = v "indent_blankline_space_char_blankline" + local char_priority = v "indent_blankline_char_priority" + local context_start_priority = v "indent_blankline_context_start_priority" + + local list_chars + local no_tab_character = false + -- No need to check for disable_with_nolist as this part would never be executed if "true" && nolist + if vim.opt.list:get() then + -- list is set, get listchars + local tab_characters + local space_character = vim.opt.listchars:get().space or " " + if vim.opt.listchars:get().tab then + -- tab characters can be any UTF-8 character, Lua 5.1 cannot handle this without external libraries + tab_characters = vim.fn.split(vim.opt.listchars:get().tab, "\\zs") + else + no_tab_character = true + tab_characters = { "^", "I" } + end + list_chars = { + space_char = space_character, + trail_char = vim.opt.listchars:get().trail or space_character, + lead_char = vim.opt.listchars:get().lead or space_character, + tab_char_start = tab_characters[1] or space_character, + tab_char_fill = tab_characters[2] or space_character, + tab_char_end = tab_characters[3], + eol_char = vim.opt.listchars:get().eol, + } + else + -- nolist is set, replace all listchars with empty space + list_chars = { + space_char = " ", + trail_char = " ", + lead_char = " ", + tab_char_start = " ", + tab_char_fill = " ", + tab_char_end = nil, + eol_char = nil, + } + end + + local max_indent_level = v "indent_blankline_indent_level" + local max_indent_increase = v "indent_blankline_max_indent_increase" + local expandtab = vim.bo.expandtab + local use_ts_indent = false + local ts_indent + if v "indent_blankline_use_treesitter" then + local ts_query_status, ts_query = pcall(require, "nvim-treesitter.query") + if not ts_query_status then + vim.schedule_wrap(function() + utils.error_handler("nvim-treesitter not found. Treesitter indent will not work", vim.log.levels.WARN) + end)() + end + local ts_indent_status + ts_indent_status, ts_indent = pcall(require, "nvim-treesitter.indent") + use_ts_indent = ts_query_status and ts_indent_status and ts_query.has_indents(vim.bo.filetype) + end + local first_indent = v "indent_blankline_show_first_indent_level" + local trail_indent = v "indent_blankline_show_trailing_blankline_indent" + local end_of_line = v "indent_blankline_show_end_of_line" + local strict_tabs = v "indent_blankline_strict_tabs" + local foldtext = v "indent_blankline_show_foldtext" + + local tabs = vim.bo.shiftwidth == 0 or not expandtab + local shiftwidth = utils._if(tabs, utils._if(no_tab_character, 2, vim.bo.tabstop), vim.bo.shiftwidth) + + local context_highlight_list = v "indent_blankline_context_highlight_list" or {} + local context_pattern_highlight = v "indent_blankline_context_pattern_highlight" or {} + local context_status, context_start, context_end, context_pattern = false, 0, 0, nil + local show_current_context_start = v "indent_blankline_show_current_context_start" + local show_current_context_start_on_current_line = v "indent_blankline_show_current_context_start_on_current_line" + if v "indent_blankline_show_current_context" then + context_status, context_start, context_end, context_pattern = + utils.get_current_context(v "indent_blankline_context_patterns", v "indent_blankline_use_treesitter_scope") + end + + local get_virtual_text = + function(indent, extra, blankline, context_active, context_indent, prev_indent, virtual_string) + local virtual_text = {} + local current_left_offset = left_offset + local local_max_indent_level = math.min(max_indent_level, prev_indent + max_indent_increase) + local indent_char = utils._if(blankline and char_blankline, char_blankline, char) + local context_indent_char = + utils._if(blankline and context_char_blankline, context_char_blankline, context_char) + local indent_char_list = utils._if(blankline and #char_list_blankline > 0, char_list_blankline, char_list) + local context_indent_char_list = utils._if( + blankline and #context_char_list_blankline > 0, + context_char_list_blankline, + context_char_list + ) + for i = 1, math.min(math.max(indent, 0), local_max_indent_level) do + local space_count = shiftwidth + local context = context_active and context_indent == i + local show_indent_char = (i ~= 1 or first_indent) and indent_char ~= "" + local show_context_indent_char = context and (i ~= 1 or first_indent) and context_indent_char ~= "" + local show_end_of_line_char = i == 1 and blankline and end_of_line and list_chars["eol_char"] + local show_indent_or_eol_char = show_indent_char or show_context_indent_char or show_end_of_line_char + if show_indent_or_eol_char then + space_count = space_count - 1 + if current_left_offset > 0 then + current_left_offset = current_left_offset - 1 + else + table.insert(virtual_text, { + utils._if( + show_end_of_line_char, + list_chars["eol_char"], + utils._if( + context, + utils.get_from_list( + context_indent_char_list, + i - utils._if(not first_indent, 1, 0), + context_indent_char + ), + utils.get_from_list( + indent_char_list, + i - utils._if(not first_indent, 1, 0), + indent_char + ) + ) + ), + utils._if( + context, + utils._if( + context_pattern_highlight[context_pattern], + context_pattern_highlight[context_pattern], + utils.get_from_list(context_highlight_list, i, context_highlight) + ), + utils.get_from_list(char_highlight_list, i, char_highlight) + ), + }) + end + end + if current_left_offset > 0 then + local current_space_count = space_count + space_count = space_count - current_left_offset + current_left_offset = current_left_offset - current_space_count + end + if space_count > 0 then + -- ternary operator below in table.insert() doesn't work because it would evaluate each option regardless + local tmp_string + local index = 1 + (i - 1) * shiftwidth + if show_indent_or_eol_char then + if table.maxn(virtual_string) >= index + space_count then + -- first char was already set above + tmp_string = table.concat(virtual_string, "", index + 1, index + space_count) + end + else + if table.maxn(virtual_string) >= index + space_count - 1 then + tmp_string = table.concat(virtual_string, "", index, index + space_count - 1) + end + end + table.insert(virtual_text, { + utils._if( + tmp_string, + tmp_string, + utils._if(blankline, space_char_blankline, list_chars["lead_char"]):rep(space_count) + ), + utils._if( + blankline, + utils.get_from_list(space_char_blankline_highlight_list, i, space_char_blankline_highlight), + utils.get_from_list( + space_char_highlight_list, + i, + utils._if(context, context_space_char_highlight, space_char_highlight) + ) + ), + }) + end + end + + local index = math.ceil(#virtual_text / 2) + 1 + local extra_context_active = context_active and context_indent == index + + if + ( + (indent_char ~= "" or #indent_char_list > 0) + or (extra_context_active and (context_indent_char ~= "" or #context_char_list > 0)) + ) + and ((blankline or extra) and trail_indent) + and (first_indent or #virtual_text > 0) + and current_left_offset < 1 + and indent < local_max_indent_level + then + table.insert(virtual_text, { + utils._if( + extra_context_active, + utils.get_from_list( + context_indent_char_list, + index - utils._if(not first_indent, 1, 0), + context_indent_char + ), + utils.get_from_list(indent_char_list, index - utils._if(not first_indent, 1, 0), indent_char) + ), + utils._if( + extra_context_active, + utils.get_from_list(context_highlight_list, index, context_highlight), + utils.get_from_list(char_highlight_list, index, char_highlight) + ), + }) + end + + return virtual_text + end + + local prev_indent + local next_indent + local next_extra + local empty_line_counter = 0 + local context_indent + for i = 1, #lines do + if foldtext and vim.fn.foldclosed(i + offset) > 0 then + utils.clear_line_indent(bufnr, i + offset) + else + local async + async = vim.loop.new_async(function() + local blankline = lines[i]:len() == 0 + local whitespace = string.match(lines[i], "^%s+") or "" + local only_whitespace = whitespace == lines[i] + local context_active = false + local context_first_line = false + if context_status then + context_active = offset + i > context_start and offset + i <= context_end + context_first_line = offset + i == context_start + end + + if blankline and use_ts_indent then + vim.schedule_wrap(function() + local indent = ts_indent.get_indent(i + offset) or 0 + utils.clear_line_indent(bufnr, i + offset) + + if + context_first_line + and show_current_context_start + and (show_current_context_start_on_current_line or lnum ~= context_start) + then + if + not vim.api.nvim_buf_is_loaded(bufnr) + or not vim.api.nvim_buf_get_var(bufnr, "__indent_blankline_active") + then + return + end + xpcall( + vim.api.nvim_buf_set_extmark, + utils.error_handler, + bufnr, + vim.g.indent_blankline_namespace, + context_start - 1, + #whitespace, + { + end_col = #lines[i], + hl_group = "IndentBlanklineContextStart", + priority = context_start_priority, + } + ) + end + + if indent == 0 then + return + end + + indent = indent / shiftwidth + if context_first_line then + context_indent = indent + 1 + end + + local virtual_text = get_virtual_text( + indent, + false, + blankline, + context_active, + context_indent, + max_indent_level, + {} + ) + if + not vim.api.nvim_buf_is_loaded(bufnr) + or not vim.api.nvim_buf_get_var(bufnr, "__indent_blankline_active") + then + return + end + xpcall( + vim.api.nvim_buf_set_extmark, + utils.error_handler, + bufnr, + vim.g.indent_blankline_namespace, + i - 1 + offset, + 0, + { + virt_text = virtual_text, + virt_text_pos = "overlay", + hl_mode = "combine", + priority = char_priority, + } + ) + end)() + return async:close() + end + + local indent, extra + local virtual_string = {} + if not blankline then + indent, extra, virtual_string = + utils.find_indent(whitespace, only_whitespace, shiftwidth, strict_tabs, list_chars) + elseif empty_line_counter > 0 then + empty_line_counter = empty_line_counter - 1 + indent = next_indent + extra = next_extra + else + if i == #lines then + indent = 0 + extra = false + else + local j = i + 1 + while j < #lines and lines[j]:len() == 0 do + j = j + 1 + empty_line_counter = empty_line_counter + 1 + end + local j_whitespace = string.match(lines[j], "^%s+") + local j_only_whitespace = j_whitespace == lines[j] + indent, extra, _ = + utils.find_indent(j_whitespace, j_only_whitespace, shiftwidth, strict_tabs, list_chars) + end + next_indent = indent + next_extra = extra + end + + if context_first_line then + context_indent = indent + 1 + end + + vim.schedule_wrap(utils.clear_line_indent)(bufnr, i + offset) + if + context_first_line + and show_current_context_start + and (show_current_context_start_on_current_line or lnum ~= context_start) + then + vim.schedule_wrap(function() + if + not vim.api.nvim_buf_is_loaded(bufnr) + or not vim.api.nvim_buf_get_var(bufnr, "__indent_blankline_active") + then + return + end + xpcall( + vim.api.nvim_buf_set_extmark, + utils.error_handler, + bufnr, + vim.g.indent_blankline_namespace, + context_start - 1, + #whitespace, + { + end_col = #lines[i], + hl_group = "IndentBlanklineContextStart", + priority = context_start_priority, + } + ) + end)() + end + + if indent == 0 and #virtual_string == 0 and not extra then + prev_indent = 0 + return async:close() + end + + if not prev_indent or indent + utils._if(extra, 1, 0) <= prev_indent + max_indent_increase then + prev_indent = indent + end + + local virtual_text = get_virtual_text( + indent, + extra, + blankline, + context_active, + context_indent, + prev_indent - utils._if(trail_indent, 0, 1), + virtual_string + ) + vim.schedule_wrap(function() + if + not vim.api.nvim_buf_is_loaded(bufnr) + or not vim.api.nvim_buf_get_var(bufnr, "__indent_blankline_active") + then + return + end + xpcall( + vim.api.nvim_buf_set_extmark, + utils.error_handler, + bufnr, + vim.g.indent_blankline_namespace, + i - 1 + offset, + 0, + { + virt_text = virtual_text, + virt_text_pos = "overlay", + hl_mode = "combine", + priority = char_priority, + } + ) + end)() + return async:close() + end) + + async:send() + end + end +end + +M.refresh = function(scroll) + xpcall(refresh, utils.error_handler, scroll) +end + +return M diff --git a/start/indent-blankline-2.20.4/lua/indent_blankline/utils.lua b/start/indent-blankline-2.20.4/lua/indent_blankline/utils.lua new file mode 100644 index 0000000..e21a5c9 --- /dev/null +++ b/start/indent-blankline-2.20.4/lua/indent_blankline/utils.lua @@ -0,0 +1,341 @@ +local M = {} + +M.memo = setmetatable({ + put = function(cache, params, result) + local node = cache + for i = 1, #params do + local param = vim.inspect(params[i]) + node.children = node.children or {} + node.children[param] = node.children[param] or {} + node = node.children[param] + end + node.result = result + end, + get = function(cache, params) + local node = cache + for i = 1, #params do + local param = vim.inspect(params[i]) + node = node.children and node.children[param] + if not node then + return nil + end + end + return node.result + end, +}, { + __call = function(memo, func) + local cache = {} + + return function(...) + local params = { ... } + local result = memo.get(cache, params) + if not result then + result = { func(...) } + memo.put(cache, params, result) + end + return unpack(result) + end + end, +}) + +M.error_handler = function(err, level) + if err:match "Invalid buffer id.*" then + return + end + if not pcall(require, "notify") then + err = string.format("indent-blankline: %s", err) + end + vim.notify_once(err, level or vim.log.levels.DEBUG, { + title = "indent-blankline", + }) +end + +M.is_indent_blankline_enabled = M.memo( + function( + b_enabled, + g_enabled, + disable_with_nolist, + opt_list, + filetype, + filetype_include, + filetype_exclude, + buftype, + buftype_exclude, + bufname_exclude, + bufname + ) + if b_enabled ~= nil then + return b_enabled + end + if g_enabled ~= true then + return false + end + if disable_with_nolist and not opt_list then + return false + end + + local plain = M._if(vim.fn.has "nvim-0.6.0" == 1, { plain = true }, true) + local undotted_filetypes = vim.split(filetype, ".", plain) + table.insert(undotted_filetypes, filetype) + + for _, ft in ipairs(filetype_exclude) do + for _, undotted_filetype in ipairs(undotted_filetypes) do + if undotted_filetype == ft then + return false + end + end + end + + for _, bt in ipairs(buftype_exclude) do + if bt == buftype then + return false + end + end + + for _, bn in ipairs(bufname_exclude) do + if vim.fn["matchstr"](bufname, bn) == bufname then + return false + end + end + + if #filetype_include > 0 then + for _, ft in ipairs(filetype_include) do + if ft == filetype then + return true + end + end + return false + end + + return true + end +) + +M.clear_line_indent = function(buf, lnum) + xpcall(vim.api.nvim_buf_clear_namespace, M.error_handler, buf, vim.g.indent_blankline_namespace, lnum - 1, lnum) +end + +M.clear_buf_indent = function(buf) + xpcall(vim.api.nvim_buf_clear_namespace, M.error_handler, buf, vim.g.indent_blankline_namespace, 0, -1) +end + +M.get_from_list = function(list, i, default) + if not list or #list == 0 then + return default + end + return list[((i - 1) % #list) + 1] +end + +M._if = function(bool, a, b) + if bool then + return a + else + return b + end +end + +M.find_indent = function(whitespace, only_whitespace, shiftwidth, strict_tabs, list_chars) + local indent = 0 + local spaces = 0 + local tab_width + local virtual_string = {} + + if whitespace then + for ch in whitespace:gmatch "." do + if ch == "\t" then + if strict_tabs and indent == 0 and spaces ~= 0 then + return 0, false, {} + end + indent = indent + math.floor(spaces / shiftwidth) + 1 + spaces = 0 + -- replace dynamic-width tab with fixed-width string (ta..ab) + tab_width = shiftwidth - table.maxn(virtual_string) % shiftwidth + -- check if tab_char_end is set, see :help listchars + if list_chars["tab_char_end"] then + if tab_width == 1 then + table.insert(virtual_string, list_chars["tab_char_end"]) + else + table.insert(virtual_string, list_chars["tab_char_start"]) + for _ = 1, (tab_width - 2) do + table.insert(virtual_string, list_chars["tab_char_fill"]) + end + table.insert(virtual_string, list_chars["tab_char_end"]) + end + else + table.insert(virtual_string, list_chars["tab_char_start"]) + for _ = 1, (tab_width - 1) do + table.insert(virtual_string, list_chars["tab_char_fill"]) + end + end + else + if strict_tabs and indent ~= 0 then + -- return early when no more tabs are found + return indent, true, virtual_string + end + if only_whitespace then + -- if the entire line is only whitespace use trail_char instead of lead_char + table.insert(virtual_string, list_chars["trail_char"]) + else + table.insert(virtual_string, list_chars["lead_char"]) + end + spaces = spaces + 1 + end + end + end + + return indent + math.floor(spaces / shiftwidth), table.maxn(virtual_string) % shiftwidth ~= 0, virtual_string +end + +M.get_current_context = function(type_patterns, use_treesitter_scope) + local ts_utils_status, ts_utils = pcall(require, "nvim-treesitter.ts_utils") + if not ts_utils_status then + vim.schedule_wrap(function() + M.error_handler("nvim-treesitter not found. Context will not work", vim.log.levels.WARN) + end)() + return false + end + local locals = require "nvim-treesitter.locals" + local cursor_node = ts_utils.get_node_at_cursor() + + if use_treesitter_scope then + local current_scope = locals.containing_scope(cursor_node, 0) + if not current_scope then + return false + end + local node_start, _, node_end, _ = current_scope:range() + if node_start == node_end then + return false + end + return true, node_start + 1, node_end + 1, current_scope:type() + end + + while cursor_node do + local node_type = cursor_node:type() + for _, rgx in ipairs(type_patterns) do + if node_type:find(rgx) then + local node_start, _, node_end, _ = cursor_node:range() + if node_start ~= node_end then + return true, node_start + 1, node_end + 1, rgx + end + end + end + cursor_node = cursor_node:parent() + end + + return false +end + +M.reset_highlights = function() + local whitespace_highlight = vim.fn.synIDtrans(vim.fn.hlID "Whitespace") + local label_highlight = vim.fn.synIDtrans(vim.fn.hlID "Label") + + local whitespace_fg = { + vim.fn.synIDattr(whitespace_highlight, "fg", "gui"), + vim.fn.synIDattr(whitespace_highlight, "fg", "cterm"), + } + local label_fg = { + vim.fn.synIDattr(label_highlight, "fg", "gui"), + vim.fn.synIDattr(label_highlight, "fg", "cterm"), + } + + for highlight_name, highlight in pairs { + IndentBlanklineChar = whitespace_fg, + IndentBlanklineSpaceChar = whitespace_fg, + IndentBlanklineSpaceCharBlankline = whitespace_fg, + IndentBlanklineContextChar = label_fg, + IndentBlanklineContextStart = label_fg, + } do + local current_highlight = vim.fn.synIDtrans(vim.fn.hlID(highlight_name)) + if + vim.fn.synIDattr(current_highlight, "fg") == "" + and vim.fn.synIDattr(current_highlight, "bg") == "" + and vim.fn.synIDattr(current_highlight, "sp") == "" + then + if highlight_name == "IndentBlanklineContextStart" then + vim.cmd( + string.format( + "highlight %s guisp=%s gui=underline cterm=underline", + highlight_name, + M._if(highlight[1] == "", "NONE", highlight[1]) + ) + ) + else + vim.cmd( + string.format( + "highlight %s guifg=%s ctermfg=%s gui=nocombine cterm=nocombine", + highlight_name, + M._if(highlight[1] == "", "NONE", highlight[1]), + M._if(highlight[2] == "", "NONE", highlight[2]) + ) + ) + end + end + end +end + +M.first_not_nil = function(...) + for _, value in pairs { ... } do -- luacheck: ignore + return value + end +end + +M.get_variable = function(key) + if vim.b[key] ~= nil then + return vim.b[key] + end + if vim.t[key] ~= nil then + return vim.t[key] + end + return vim.g[key] +end + +M.merge_ranges = function(ranges) + local merged_ranges = { { unpack(ranges[1]) } } + + for i = 2, #ranges do + local current_end = merged_ranges[#merged_ranges][2] + local next_start, next_end = unpack(ranges[i]) + if current_end >= next_start - 1 then + if current_end < next_end then + merged_ranges[#merged_ranges][2] = next_end + end + else + table.insert(merged_ranges, { next_start, next_end }) + end + end + + return merged_ranges +end + +M.binary_search_ranges = function(ranges, target_range) + local exact_match = false + local idx_start = 1 + local idx_end = #ranges + local idx_mid + + local range_start + local target_start = target_range[1] + + while idx_start < idx_end do + idx_mid = math.ceil((idx_start + idx_end) / 2) + range_start = ranges[idx_mid][1] + + if range_start == target_start then + exact_match = true + break + elseif range_start < target_start then + idx_start = idx_mid -- it's important to make the low-end inclusive + else + idx_end = idx_mid - 1 + end + end + + -- if we don't have an exact match, choose the smallest index + if not exact_match then + idx_mid = idx_start + end + + return idx_mid +end + +return M diff --git a/start/indent-blankline-2.20.4/plugin/indent_blankline.vim b/start/indent-blankline-2.20.4/plugin/indent_blankline.vim new file mode 100644 index 0000000..203d140 --- /dev/null +++ b/start/indent-blankline-2.20.4/plugin/indent_blankline.vim @@ -0,0 +1,41 @@ + +if exists('g:loaded_indent_blankline') || !has('nvim-0.5.0') + finish +endif +let g:loaded_indent_blankline = 1 + +function s:try(cmd) + try + execute a:cmd + catch /E12/ + return + endtry +endfunction + +command! -bang IndentBlanklineRefresh call s:try('lua require("indent_blankline.commands").refresh("<bang>" == "!")') +command! -bang IndentBlanklineRefreshScroll call s:try('lua require("indent_blankline.commands").refresh("<bang>" == "!", true)') +command! -bang IndentBlanklineEnable call s:try('lua require("indent_blankline.commands").enable("<bang>" == "!")') +command! -bang IndentBlanklineDisable call s:try('lua require("indent_blankline.commands").disable("<bang>" == "!")') +command! -bang IndentBlanklineToggle call s:try('lua require("indent_blankline.commands").toggle("<bang>" == "!")') + +if exists(':IndentLinesEnable') && !g:indent_blankline_disable_warning_message + echohl Error + echom 'indent-blankline does not require IndentLine anymore, please remove it.' + echohl None +endif + +if !exists('g:__indent_blankline_setup_completed') + lua require("indent_blankline").setup {} +endif + +lua require("indent_blankline").init() + +augroup IndentBlanklineAutogroup + autocmd! + autocmd OptionSet list,listchars,shiftwidth,tabstop,expandtab IndentBlanklineRefresh + autocmd FileChangedShellPost,TextChanged,TextChangedI,CompleteChanged,BufWinEnter,Filetype * IndentBlanklineRefresh + autocmd WinScrolled * IndentBlanklineRefreshScroll + autocmd ColorScheme * lua require("indent_blankline.utils").reset_highlights() + autocmd VimEnter * lua require("indent_blankline").init() +augroup END + diff --git a/start/lspconfig-0.1.3/doc/server_configurations.md b/start/lspconfig-0.1.3/doc/server_configurations.md deleted file mode 100644 index 426c422..0000000 --- a/start/lspconfig-0.1.3/doc/server_configurations.md +++ /dev/null @@ -1,6554 +0,0 @@ -# Configurations -<!-- *lspconfig-server-configurations* --> - -The following LSP configs are included. This documentation is autogenerated from the lua files. Follow a link to find documentation for -that config. This file is accessible in neovim via `:help lspconfig-server-configurations` - -- [als](#als) -- [angularls](#angularls) -- [ansiblels](#ansiblels) -- [arduino_language_server](#arduino_language_server) -- [asm_lsp](#asm_lsp) -- [awk_ls](#awk_ls) -- [bashls](#bashls) -- [beancount](#beancount) -- [bicep](#bicep) -- [bsl_ls](#bsl_ls) -- [ccls](#ccls) -- [clangd](#clangd) -- [clarity_lsp](#clarity_lsp) -- [clojure_lsp](#clojure_lsp) -- [cmake](#cmake) -- [codeqlls](#codeqlls) -- [crystalline](#crystalline) -- [csharp_ls](#csharp_ls) -- [cssls](#cssls) -- [cssmodules_ls](#cssmodules_ls) -- [cucumber_language_server](#cucumber_language_server) -- [dartls](#dartls) -- [denols](#denols) -- [dhall_lsp_server](#dhall_lsp_server) -- [diagnosticls](#diagnosticls) -- [dockerls](#dockerls) -- [dotls](#dotls) -- [efm](#efm) -- [elixirls](#elixirls) -- [elmls](#elmls) -- [ember](#ember) -- [emmet_ls](#emmet_ls) -- [erlangls](#erlangls) -- [esbonio](#esbonio) -- [eslint](#eslint) -- [flow](#flow) -- [flux_lsp](#flux_lsp) -- [foam_ls](#foam_ls) -- [fortls](#fortls) -- [fsautocomplete](#fsautocomplete) -- [fstar](#fstar) -- [gdscript](#gdscript) -- [ghcide](#ghcide) -- [golangci_lint_ls](#golangci_lint_ls) -- [gopls](#gopls) -- [gradle_ls](#gradle_ls) -- [grammarly](#grammarly) -- [graphql](#graphql) -- [groovyls](#groovyls) -- [haxe_language_server](#haxe_language_server) -- [hdl_checker](#hdl_checker) -- [hhvm](#hhvm) -- [hie](#hie) -- [hls](#hls) -- [hoon_ls](#hoon_ls) -- [html](#html) -- [idris2_lsp](#idris2_lsp) -- [intelephense](#intelephense) -- [java_language_server](#java_language_server) -- [jdtls](#jdtls) -- [jedi_language_server](#jedi_language_server) -- [jsonls](#jsonls) -- [jsonnet_ls](#jsonnet_ls) -- [julials](#julials) -- [kotlin_language_server](#kotlin_language_server) -- [lean3ls](#lean3ls) -- [leanls](#leanls) -- [lelwel_ls](#lelwel_ls) -- [lemminx](#lemminx) -- [ltex](#ltex) -- [metals](#metals) -- [mint](#mint) -- [mm0_ls](#mm0_ls) -- [nickel_ls](#nickel_ls) -- [nimls](#nimls) -- [ocamlls](#ocamlls) -- [ocamllsp](#ocamllsp) -- [ols](#ols) -- [omnisharp](#omnisharp) -- [opencl_ls](#opencl_ls) -- [openscad_ls](#openscad_ls) -- [pasls](#pasls) -- [perlls](#perlls) -- [perlnavigator](#perlnavigator) -- [perlpls](#perlpls) -- [phpactor](#phpactor) -- [please](#please) -- [powershell_es](#powershell_es) -- [prismals](#prismals) -- [prosemd_lsp](#prosemd_lsp) -- [psalm](#psalm) -- [puppet](#puppet) -- [purescriptls](#purescriptls) -- [pylsp](#pylsp) -- [pyre](#pyre) -- [pyright](#pyright) -- [quick_lint_js](#quick_lint_js) -- [r_language_server](#r_language_server) -- [racket_langserver](#racket_langserver) -- [reason_ls](#reason_ls) -- [remark_ls](#remark_ls) -- [rescriptls](#rescriptls) -- [rls](#rls) -- [rnix](#rnix) -- [robotframework_ls](#robotframework_ls) -- [rome](#rome) -- [rust_analyzer](#rust_analyzer) -- [salt_ls](#salt_ls) -- [scry](#scry) -- [serve_d](#serve_d) -- [sixtyfps](#sixtyfps) -- [slint_lsp](#slint_lsp) -- [solang](#solang) -- [solargraph](#solargraph) -- [solc](#solc) -- [solidity_ls](#solidity_ls) -- [sorbet](#sorbet) -- [sourcekit](#sourcekit) -- [sourcery](#sourcery) -- [spectral](#spectral) -- [sqlls](#sqlls) -- [sqls](#sqls) -- [stylelint_lsp](#stylelint_lsp) -- [sumneko_lua](#sumneko_lua) -- [svelte](#svelte) -- [svls](#svls) -- [tailwindcss](#tailwindcss) -- [taplo](#taplo) -- [teal_ls](#teal_ls) -- [terraform_lsp](#terraform_lsp) -- [terraformls](#terraformls) -- [texlab](#texlab) -- [tflint](#tflint) -- [theme_check](#theme_check) -- [tsserver](#tsserver) -- [typeprof](#typeprof) -- [vala_ls](#vala_ls) -- [vdmj](#vdmj) -- [verible](#verible) -- [vimls](#vimls) -- [vls](#vls) -- [volar](#volar) -- [vuels](#vuels) -- [yamlls](#yamlls) -- [zeta_note](#zeta_note) -- [zk](#zk) -- [zls](#zls) - -## als - -https://github.com/AdaCore/ada_language_server - -Installation instructions can be found [here](https://github.com/AdaCore/ada_language_server#Install). - -Can be configured by passing a "settings" object to `als.setup{}`: - -```lua -require('lspconfig').als.setup{ - settings = { - ada = { - projectFile = "project.gpr"; - scenarioVariables = { ... }; - } - } -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.als.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ada_language_server" } - ``` - - `filetypes` : - ```lua - { "ada" } - ``` - - `root_dir` : - ```lua - util.root_pattern("Makefile", ".git", "*.gpr", "*.adc") - ``` - - -## angularls - -https://github.com/angular/vscode-ng-language-service - -`angular-language-server` can be installed via npm `npm install -g @angular/language-server`. - -Note, that if you override the default `cmd`, you must also update `on_new_config` to set `new_config.cmd` during startup. - -```lua -local project_library_path = "/path/to/project/lib" -local cmd = {"ngserver", "--stdio", "--tsProbeLocations", project_library_path , "--ngProbeLocations", project_library_path} - -require'lspconfig'.angularls.setup{ - cmd = cmd, - on_new_config = function(new_config,new_root_dir) - new_config.cmd = cmd - end, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.angularls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ngserver", "--stdio", "--tsProbeLocations", "", "--ngProbeLocations", "" } - ``` - - `filetypes` : - ```lua - { "typescript", "html", "typescriptreact", "typescript.tsx" } - ``` - - `root_dir` : - ```lua - root_pattern("angular.json", ".git") - ``` - - -## ansiblels - -https://github.com/ansible/ansible-language-server - -Language server for the ansible configuration management tool. - -`ansible-language-server` can be installed via `npm`: - -```sh -npm install -g @ansible/ansible-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ansiblels.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ansible-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "yaml.ansible" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - ansible = { - ansible = { - path = "ansible" - }, - ansibleLint = { - enabled = true, - path = "ansible-lint" - }, - executionEnvironment = { - enabled = false - }, - python = { - interpreterPath = "python" - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## arduino_language_server - -https://github.com/arduino/arduino-language-server - -Language server for Arduino - -The `arduino-language-server` can be installed by running: - go get -u github.com/arduino/arduino-language-server - -The `arduino-cli` tools must also be installed. Follow these instructions for your distro: - https://arduino.github.io/arduino-cli/latest/installation/ - -After installing the `arduino-cli` tools, follow these instructions for generating -a configuration file: - https://arduino.github.io/arduino-cli/latest/getting-started/#create-a-configuration-file -and make sure you install any relevant platforms libraries: - https://arduino.github.io/arduino-cli/latest/getting-started/#install-the-core-for-your-board - -The language server also requires `clangd` be installed. It will look for `clangd` by default but -the binary path can be overridden if need be. - -After all dependencies are installed you'll need to override the lspconfig command for the -language server in your setup function with the necessary configurations: - -```lua -lspconfig.arduino_language_server.setup({ - cmd = { - -- Required - "arduino-language-server", - "-cli-config", "/path/to/arduino-cli.yaml", - -- Optional - "-cli", "/path/to/arduino-cli", - "-clangd", "/path/to/clangd" - } -}) -``` - -For further instruction about configuration options, run `arduino-language-server --help`. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.arduino_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "arduino-language-server" } - ``` - - `filetypes` : - ```lua - { "arduino" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## asm_lsp - -https://github.com/bergercookie/asm-lsp - -Language Server for GAS/GO Assembly - -`asm-lsp` can be installed via cargo: -cargo install asm-lsp - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.asm_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "asm-lsp" } - ``` - - `filetypes` : - ```lua - { "asm", "vmasm" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## awk_ls - -https://github.com/Beaglefoot/awk-language-server/ - -`awk-language-server` can be installed via `npm`: -```sh -npm install -g awk-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.awk_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "awk-language-server" } - ``` - - `filetypes` : - ```lua - { "awk" } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## bashls - -https://github.com/mads-hartmann/bash-language-server - -`bash-language-server` can be installed via `npm`: -```sh -npm i -g bash-language-server -``` - -Language server for bash, written using tree sitter in typescript. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.bashls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "bash-language-server", "start" } - ``` - - `cmd_env` : - ```lua - { - GLOB_PATTERN = "*@(.sh|.inc|.bash|.command)" - } - ``` - - `filetypes` : - ```lua - { "sh" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## beancount - -https://github.com/polarmutex/beancount-language-server#installation - -See https://github.com/polarmutex/beancount-language-server#configuration for configuration options - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.beancount.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "beancount-langserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "beancount" } - ``` - - `init_options` : - ```lua - { - journalFile = "", - pythonPath = "python3" - } - ``` - - `root_dir` : - ```lua - root_pattern("elm.json") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## bicep - -https://github.com/azure/bicep -Bicep language server - -Bicep language server can be installed by downloading and extracting a release of bicep-langserver.zip from [Bicep GitHub releases](https://github.com/Azure/bicep/releases). - -Bicep language server requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -Neovim does not have built-in support for the bicep filetype which is required for lspconfig to automatically launch the language server. - -Filetype detection can be added via an autocmd: -```lua -vim.cmd [[ autocmd BufNewFile,BufRead *.bicep set filetype=bicep ]] -``` - -**By default, bicep language server does not have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. - -```lua -local bicep_lsp_bin = "/path/to/bicep-langserver/Bicep.LangServer.dll" -require'lspconfig'.bicep.setup{ - cmd = { "dotnet", bicep_lsp_bin }; - ... -} -``` - -To download the latest release and place in /usr/local/bin/bicep-langserver: -```bash -(cd $(mktemp -d) \ - && curl -fLO https://github.com/Azure/bicep/releases/latest/download/bicep-langserver.zip \ - && rm -rf /usr/local/bin/bicep-langserver \ - && unzip -d /usr/local/bin/bicep-langserver bicep-langserver.zip) -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.bicep.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "bicep" } - ``` - - `init_options` : - ```lua - {} - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## bsl_ls - - https://github.com/1c-syntax/bsl-language-server - - Language Server Protocol implementation for 1C (BSL) - 1C:Enterprise 8 and OneScript languages. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.bsl_ls.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "bsl", "os" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - -## ccls - -https://github.com/MaskRay/ccls/wiki - -ccls relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified -as compile_commands.json or, for simpler projects, a .ccls. -For details on how to automatically generate one using CMake look [here](https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html). Alternatively, you can use [Bear](https://github.com/rizsotto/Bear). - -Customization options are passed to ccls at initialization time via init_options, a list of available options can be found [here](https://github.com/MaskRay/ccls/wiki/Customization#initialization-options). For example: - -```lua -local lspconfig = require'lspconfig' -lspconfig.ccls.setup { - init_options = { - compilationDatabaseDirectory = "build"; - index = { - threads = 0; - }; - clang = { - excludeArgs = { "-frounding-math"} ; - }; - } -} - -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ccls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ccls" } - ``` - - `filetypes` : - ```lua - { "c", "cpp", "objc", "objcpp" } - ``` - - `offset_encoding` : - ```lua - "utf-32" - ``` - - `root_dir` : - ```lua - root_pattern("compile_commands.json", ".ccls", ".git") - ``` - - `single_file_support` : - ```lua - false - ``` - - -## clangd - -https://clangd.llvm.org/installation.html - -**NOTE:** Clang >= 11 is recommended! See [this issue for more](https://github.com/neovim/nvim-lsp/issues/23). - -clangd relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified as compile_commands.json, see https://clangd.llvm.org/installation#compile_commandsjson - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.clangd.setup{} -``` -**Commands:** -- ClangdSwitchSourceHeader: Switch between source/header - -**Default values:** - - `capabilities` : - ```lua - default capabilities, with offsetEncoding utf-8 - ``` - - `cmd` : - ```lua - { "clangd" } - ``` - - `filetypes` : - ```lua - { "c", "cpp", "objc", "objcpp" } - ``` - - `root_dir` : - ```lua - root_pattern( - '.clangd', - '.clang-tidy', - '.clang-format', - 'compile_commands.json', - 'compile_flags.txt', - 'configure.ac', - '.git' - ) - - ``` - - `single_file_support` : - ```lua - true - ``` - - -## clarity_lsp - -`clarity-lsp` is a language server for the Clarity language. Clarity is a decidable smart contract language that optimizes for predictability and security. Smart contracts allow developers to encode essential business logic on a blockchain. - -To learn how to configure the clarity language server, see the [clarity-lsp documentation](https://github.com/hirosystems/clarity-lsp). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.clarity_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "clarity-lsp" } - ``` - - `filetypes` : - ```lua - { "clar", "clarity" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - -## clojure_lsp - -https://github.com/snoe/clojure-lsp - -Clojure Language Server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.clojure_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "clojure-lsp" } - ``` - - `filetypes` : - ```lua - { "clojure", "edn" } - ``` - - `root_dir` : - ```lua - root_pattern("project.clj", "deps.edn", "build.boot", "shadow-cljs.edn", ".git") - ``` - - -## cmake - -https://github.com/regen100/cmake-language-server - -CMake LSP Implementation - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cmake.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "cmake-language-server" } - ``` - - `filetypes` : - ```lua - { "cmake" } - ``` - - `init_options` : - ```lua - { - buildDirectory = "build" - } - ``` - - `root_dir` : - ```lua - root_pattern(".git", "compile_commands.json", "build") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## codeqlls - -Reference: -https://help.semmle.com/codeql/codeql-cli.html - -Binaries: -https://github.com/github/codeql-cli-binaries - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.codeqlls.setup{} -``` - - -**Default values:** - - `before_init` : - ```lua - see source file - ``` - - `cmd` : - ```lua - { "codeql", "execute", "language-server", "--check-errors", "ON_CHANGE", "-q" } - ``` - - `filetypes` : - ```lua - { "ql" } - ``` - - `log_level` : - ```lua - 2 - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - search_path = "list containing all search paths, eg: '~/codeql-home/codeql-repo'" - } - ``` - - -## crystalline - -https://github.com/elbywan/crystalline - -Crystal language server. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.crystalline.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "crystalline" } - ``` - - `filetypes` : - ```lua - { "crystal" } - ``` - - `root_dir` : - ```lua - root_pattern('shard.yml', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## csharp_ls - -https://github.com/razzmatazz/csharp-language-server - -Language Server for C#. - -csharp-ls requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -The preferred way to install csharp-ls is with `dotnet tool install --global csharp-ls`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.csharp_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "csharp-ls" } - ``` - - `filetypes` : - ```lua - { "cs" } - ``` - - `init_options` : - ```lua - { - AutomaticWorkspaceInit = true - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## cssls - - -https://github.com/hrsh7th/vscode-langservers-extracted - -`css-languageserver` can be installed via `npm`: - -```sh -npm i -g vscode-langservers-extracted -``` - -Neovim does not currently include built-in snippets. `vscode-css-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. - -```lua ---Enable (broadcasting) snippet capability for completion -local capabilities = vim.lsp.protocol.make_client_capabilities() -capabilities.textDocument.completion.completionItem.snippetSupport = true - -require'lspconfig'.cssls.setup { - capabilities = capabilities, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cssls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vscode-css-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "css", "scss", "less" } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", ".git") or bufdir - ``` - - `settings` : - ```lua - { - css = { - validate = true - }, - less = { - validate = true - }, - scss = { - validate = true - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## cssmodules_ls - -https://github.com/antonk52/cssmodules-language-server - -Language server for autocompletion and go-to-definition functionality for CSS modules. - -You can install cssmodules-language-server via npm: -```sh -npm install -g cssmodules-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cssmodules_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "cssmodules-language-server" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "typescript", "typescriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern("package.json") - ``` - - -## cucumber_language_server - -https://cucumber.io -https://github.com/cucumber/common -https://www.npmjs.com/package/@cucumber/language-server - -Language server for Cucumber. - -`cucumber-language-server` can be installed via `npm`: -```sh -npm install -g @cucumber/language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cucumber_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "cucumber-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "cucumber" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## dartls - -https://github.com/dart-lang/sdk/tree/master/pkg/analysis_server/tool/lsp_spec - -Language server for dart. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dartls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "dart", "./snapshots/analysis_server.dart.snapshot", "--lsp" } - ``` - - `filetypes` : - ```lua - { "dart" } - ``` - - `init_options` : - ```lua - { - closingLabels = true, - flutterOutline = true, - onlyAnalyzeProjectsWithOpenFiles = true, - outline = true, - suggestFromUnimportedLibraries = true - } - ``` - - `root_dir` : - ```lua - root_pattern("pubspec.yaml") - ``` - - `settings` : - ```lua - { - dart = { - completeFunctionCalls = true, - showTodos = true - } - } - ``` - - -## denols - -https://github.com/denoland/deno - -Deno's built-in language server - -To approrpiately highlight codefences returned from denols, you will need to augment vim.g.markdown_fenced languages - in your init.lua. Example: - -```lua -vim.g.markdown_fenced_languages = { - "ts=typescript" -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.denols.setup{} -``` -**Commands:** -- DenolsCache: Cache a module and all of its dependencies. - -**Default values:** - - `cmd` : - ```lua - { "deno", "lsp" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } - ``` - - `handlers` : - ```lua - { - ["textDocument/definition"] = <function 1>, - ["textDocument/references"] = <function 1> - } - ``` - - `init_options` : - ```lua - { - enable = true, - lint = false, - unstable = false - } - ``` - - `root_dir` : - ```lua - root_pattern("deno.json", "deno.jsonc", "tsconfig.json", ".git") - ``` - - -## dhall_lsp_server - -https://github.com/dhall-lang/dhall-haskell/tree/master/dhall-lsp-server - -language server for dhall - -`dhall-lsp-server` can be installed via cabal: -```sh -cabal install dhall-lsp-server -``` -prebuilt binaries can be found [here](https://github.com/dhall-lang/dhall-haskell/releases). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dhall_lsp_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "dhall-lsp-server" } - ``` - - `filetypes` : - ```lua - { "dhall" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## diagnosticls - -https://github.com/iamcco/diagnostic-languageserver - -Diagnostic language server integrate with linters. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.diagnosticls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "diagnostic-languageserver", "--stdio" } - ``` - - `filetypes` : - ```lua - Empty by default, override to add filetypes - ``` - - `root_dir` : - ```lua - Vim's starting directory - ``` - - `single_file_support` : - ```lua - true - ``` - - -## dockerls - -https://github.com/rcjsuen/dockerfile-language-server-nodejs - -`docker-langserver` can be installed via `npm`: -```sh -npm install -g dockerfile-language-server-nodejs -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dockerls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "docker-langserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "dockerfile" } - ``` - - `root_dir` : - ```lua - root_pattern("Dockerfile") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## dotls - -https://github.com/nikeee/dot-language-server - -`dot-language-server` can be installed via `npm`: -```sh -npm install -g dot-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dotls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "dot-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "dot" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## efm - -https://github.com/mattn/efm-langserver - -General purpose Language Server that can use specified error message format generated from specified command. - -Requires at minimum EFM version [v0.0.38](https://github.com/mattn/efm-langserver/releases/tag/v0.0.38) to support -launching the language server on single files. If on an older version of EFM, disable single file support: - -```lua -require('lspconfig')['efm'].setup{ - settings = ..., -- You must populate this according to the EFM readme - filetypes = ..., -- Populate this according to the note below - single_file_support = false, -- This is the important line for supporting older version of EFM -} -``` - -Note: In order for neovim's built-in language server client to send the appropriate `languageId` to EFM, **you must -specify `filetypes` in your call to `setup{}`**. Otherwise `lspconfig` will launch EFM on the `BufEnter` instead -of the `FileType` autocommand, and the `filetype` variable used to populate the `languageId` will not yet be set. - -```lua -require('lspconfig')['efm'].setup{ - settings = ..., -- You must populate this according to the EFM readme - filetypes = { 'python','cpp','lua' } -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.efm.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "efm-langserver" } - ``` - - `root_dir` : - ```lua - util.root_pattern(".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## elixirls - -https://github.com/elixir-lsp/elixir-ls - -`elixir-ls` can be installed by following the instructions [here](https://github.com/elixir-lsp/elixir-ls#building-and-running). - -```bash -curl -fLO https://github.com/elixir-lsp/elixir-ls/releases/latest/download/elixir-ls.zip -unzip elixir-ls.zip -d /path/to/elixir-ls -# Unix -chmod +x /path/to/elixir-ls/language_server.sh -``` - -**By default, elixir-ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped elixir-ls. - -```lua -require'lspconfig'.elixirls.setup{ - -- Unix - cmd = { "/path/to/elixir-ls/language_server.sh" }; - -- Windows - cmd = { "/path/to/elixir-ls/language_server.bat" }; - ... -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.elixirls.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "elixir", "eelixir" } - ``` - - `root_dir` : - ```lua - root_pattern("mix.exs", ".git") or vim.loop.os_homedir() - ``` - - -## elmls - -https://github.com/elm-tooling/elm-language-server#installation - -If you don't want to use Nvim to install it, then you can use: -```sh -npm install -g elm elm-test elm-format @elm-tooling/elm-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.elmls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "elm-language-server" } - ``` - - `filetypes` : - ```lua - { "elm" } - ``` - - `init_options` : - ```lua - { - elmAnalyseTrigger = "change" - } - ``` - - `root_dir` : - ```lua - root_pattern("elm.json") - ``` - - -## ember - -https://github.com/lifeart/ember-language-server - -`ember-language-server` can be installed via `npm`: - -```sh -npm install -g @lifeart/ember-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ember.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ember-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "handlebars", "typescript", "javascript" } - ``` - - `root_dir` : - ```lua - root_pattern("ember-cli-build.js", ".git") - ``` - - -## emmet_ls - -https://github.com/aca/emmet-ls - -Package can be installed via `npm`: -```sh -npm install -g emmet-ls -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.emmet_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "emmet-ls", "--stdio" } - ``` - - `filetypes` : - ```lua - { "html", "css" } - ``` - - `root_dir` : - ```lua - git root - ``` - - `single_file_support` : - ```lua - true - ``` - - -## erlangls - -https://erlang-ls.github.io - -Language Server for Erlang. - -Clone [erlang_ls](https://github.com/erlang-ls/erlang_ls) -Compile the project with `make` and copy resulting binaries somewhere in your $PATH eg. `cp _build/*/bin/* ~/local/bin` - -Installation instruction can be found [here](https://github.com/erlang-ls/erlang_ls). - -Installation requirements: - - [Erlang OTP 21+](https://github.com/erlang/otp) - - [rebar3 3.9.1+](https://github.com/erlang/rebar3) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.erlangls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "erlang_ls" } - ``` - - `filetypes` : - ```lua - { "erlang" } - ``` - - `root_dir` : - ```lua - root_pattern('rebar.config', 'erlang.mk', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## esbonio - -https://github.com/swyddfa/esbonio - -Esbonio is a language server for [Sphinx](https://www.sphinx-doc.org/en/master/) documentation projects. -The language server can be installed via pip - -``` -pip install esbonio -``` - -Since Sphinx is highly extensible you will get best results if you install the language server in the same -Python environment as the one used to build your documentation. To ensure that the correct Python environment -is picked up, you can either launch `nvim` with the correct environment activated. - -``` -source env/bin/activate -nvim -``` - -Or you can modify the default `cmd` to include the full path to the Python interpreter. - -```lua -require'lspconfig'.esbonio.setup { - cmd = { '/path/to/virtualenv/bin/python', '-m', 'esbonio' } -} -``` - -Esbonio supports a number of config values passed as `init_options` on startup, for example. - -```lua -require'lspconfig'.esbonio.setup { - init_options = { - server = { - logLevel = "debug" - }, - sphinx = { - confDir = "/path/to/docs", - srcDir = "${confDir}/../docs-src" - } -} -``` - -A full list and explanation of the available options can be found [here](https://swyddfa.github.io/esbonio/docs/lsp/editors/index.html) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.esbonio.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "python3", "-m", "esbonio" } - ``` - - `filetypes` : - ```lua - { "rst" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## eslint - -https://github.com/hrsh7th/vscode-langservers-extracted - -vscode-eslint-language-server: A linting engine for JavaScript / Typescript - -`vscode-eslint-language-server` can be installed via `npm`: -```sh -npm i -g vscode-langservers-extracted -``` - -vscode-eslint-language-server provides an EslintFixAll command that can be used to format document on save -```vim -autocmd BufWritePre *.tsx,*.ts,*.jsx,*.js EslintFixAll -``` - -See [vscode-eslint](https://github.com/microsoft/vscode-eslint/blob/55871979d7af184bf09af491b6ea35ebd56822cf/server/src/eslintServer.ts#L216-L229) for configuration options. - -Additional messages you can handle: eslint/noConfig -Messages already handled in lspconfig: eslint/openDoc, eslint/confirmESLintExecution, eslint/probeFailed, eslint/noLibrary - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.eslint.setup{} -``` -**Commands:** -- EslintFixAll: Fix all eslint problems for this buffer - -**Default values:** - - `cmd` : - ```lua - { "vscode-eslint-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx", "vue" } - ``` - - `handlers` : - ```lua - { - ["eslint/confirmESLintExecution"] = <function 1>, - ["eslint/noLibrary"] = <function 2>, - ["eslint/openDoc"] = <function 3>, - ["eslint/probeFailed"] = <function 4> - } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - codeAction = { - disableRuleComment = { - enable = true, - location = "separateLine" - }, - showDocumentation = { - enable = true - } - }, - codeActionOnSave = { - enable = false, - mode = "all" - }, - format = true, - nodePath = "", - onIgnoredFiles = "off", - packageManager = "npm", - quiet = false, - rulesCustomizations = {}, - run = "onType", - useESLintClass = false, - validate = "on", - workingDirectory = { - mode = "location" - } - } - ``` - - -## flow - -https://flow.org/ -https://github.com/facebook/flow - -See below for how to setup Flow itself. -https://flow.org/en/docs/install/ - -See below for lsp command options. - -```sh -npx flow lsp --help -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.flow.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "npx", "--no-install", "flow", "lsp" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx" } - ``` - - `root_dir` : - ```lua - root_pattern(".flowconfig") - ``` - - -## flux_lsp - -https://github.com/influxdata/flux-lsp -`flux-lsp` can be installed via `cargo`: -```sh -cargo install --git https://github.com/influxdata/flux-lsp -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.flux_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "flux-lsp" } - ``` - - `filetypes` : - ```lua - { "flux" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## foam_ls - -https://github.com/FoamScience/foam-language-server - -`foam-language-server` can be installed via `npm` -```sh -npm install -g foam-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.foam_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "foam-ls", "--stdio" } - ``` - - `filetypes` : - ```lua - { "foam", "OpenFOAM" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## fortls - -https://github.com/hansec/fortran-language-server - -Fortran Language Server for the Language Server Protocol - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.fortls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "fortls" } - ``` - - `filetypes` : - ```lua - { "fortran" } - ``` - - `root_dir` : - ```lua - root_pattern(".fortls") - ``` - - `settings` : - ```lua - { - nthreads = 1 - } - ``` - - -## fsautocomplete - -https://github.com/fsharp/FsAutoComplete - -Language Server for F# provided by FsAutoComplete (FSAC). - -FsAutoComplete requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -The preferred way to install FsAutoComplete is with `dotnet tool install --global fsautocomplete`. - -Instructions to compile from source are found on the main [repository](https://github.com/fsharp/FsAutoComplete). - -You may also need to configure the filetype as Vim defaults to Forth for `*.fs` files: - -`autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp` - -This is automatically done by plugins such as [PhilT/vim-fsharp](https://github.com/PhilT/vim-fsharp), [fsharp/vim-fsharp](https://github.com/fsharp/vim-fsharp), and [adelarsq/neofsharp.vim](https://github.com/adelarsq/neofsharp.vim). - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.fsautocomplete.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "fsautocomplete", "--background-service-enabled" } - ``` - - `filetypes` : - ```lua - { "fsharp" } - ``` - - `init_options` : - ```lua - { - AutomaticWorkspaceInit = true - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## fstar - -https://github.com/FStarLang/FStar - -LSP support is included in FStar. Make sure `fstar.exe` is in your PATH. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.fstar.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "fstar.exe", "--lsp" } - ``` - - `filetypes` : - ```lua - { "fstar" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## gdscript - -https://github.com/godotengine/godot - -Language server for GDScript, used by Godot Engine. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.gdscript.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "nc", "localhost", "6008" } - ``` - - `filetypes` : - ```lua - { "gd", "gdscript", "gdscript3" } - ``` - - `root_dir` : - ```lua - util.root_pattern("project.godot", ".git") - ``` - - -## ghcide - -https://github.com/digital-asset/ghcide - -A library for building Haskell IDE tooling. -"ghcide" isn't for end users now. Use "haskell-language-server" instead of "ghcide". - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ghcide.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ghcide", "--lsp" } - ``` - - `filetypes` : - ```lua - { "haskell", "lhaskell" } - ``` - - `root_dir` : - ```lua - root_pattern("stack.yaml", "hie-bios", "BUILD.bazel", "cabal.config", "package.yaml") - ``` - - -## golangci_lint_ls - -Combination of both lint server and client - -https://github.com/nametake/golangci-lint-langserver -https://github.com/golangci/golangci-lint - - -Installation of binaries needed is done via - -``` -go install github.com/nametake/golangci-lint-langserver@latest -go install github.com/golangci/golangci-lint/cmd/golangci-lint@v1.42.1 -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.golangci_lint_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "golangci-lint-langserver" } - ``` - - `filetypes` : - ```lua - { "go", "gomod" } - ``` - - `init_options` : - ```lua - { - command = { "golangci-lint", "run", "--out-format", "json" } - } - ``` - - `root_dir` : - ```lua - root_pattern('go.work') or root_pattern('go.mod', '.golangci.yaml', '.git') - ``` - - -## gopls - -https://github.com/golang/tools/tree/master/gopls - -Google's lsp server for golang. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.gopls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "gopls" } - ``` - - `filetypes` : - ```lua - { "go", "gomod", "gotmpl" } - ``` - - `root_dir` : - ```lua - root_pattern("go.mod", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## gradle_ls - -https://github.com/microsoft/vscode-gradle - -Microsoft's lsp server for gradle files - -If you're setting this up manually, build vscode-gradle using `./gradlew installDist` and point `cmd` to the `gradle-language-server` generated in the build directory - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.gradle_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "gradle-language-server" } - ``` - - `filetypes` : - ```lua - { "groovy" } - ``` - - `root_dir` : - ```lua - root_pattern("settings.gradle") - ``` - - -## grammarly - -https://github.com/emacs-grammarly/unofficial-grammarly-language-server - -`unofficial-grammarly-language-server` can be installed via `npm`: - -```sh -npm i -g @emacs-grammarly/unofficial-grammarly-language-server -``` - -WARNING: Since this language server uses Grammarly's API, any document you open with it running is shared with them. Please evaluate their [privacy policy](https://www.grammarly.com/privacy-policy) before using this. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.grammarly.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "unofficial-grammarly-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `handlers` : - ```lua - { - ["$/updateDocumentState"] = <function 1> - } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## graphql - -https://github.com/graphql/graphiql/tree/main/packages/graphql-language-service-cli - -`graphql-lsp` can be installed via `npm`: - -```sh -npm install -g graphql-language-service-cli -``` - -Note that you must also have [the graphql package](https://github.com/graphql/graphql-js) installed and create a [GraphQL config file](https://www.graphql-config.com/docs/user/user-introduction). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.graphql.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "graphql-lsp", "server", "-m", "stream" } - ``` - - `filetypes` : - ```lua - { "graphql", "typescriptreact", "javascriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern('.git', '.graphqlrc*', '.graphql.config.*') - ``` - - -## groovyls - -https://github.com/prominic/groovy-language-server.git - -Requirements: - - Linux/macOS (for now) - - Java 11+ - -`groovyls` can be installed by following the instructions [here](https://github.com/prominic/groovy-language-server.git#build). - -If you have installed groovy language server, you can set the `cmd` custom path as follow: - -```lua -require'lspconfig'.groovyls.setup{ - -- Unix - cmd = { "java", "-jar", "path/to/groovyls/groovy-language-server-all.jar" }, - ... -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.groovyls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "java", "-jar", "groovy-language-server-all.jar" } - ``` - - `filetypes` : - ```lua - { "groovy" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## haxe_language_server - -https://github.com/vshaxe/haxe-language-server - -The Haxe language server can be built by running the following commands from -the project's root directory: - - npm install - npx lix run vshaxe-build -t language-server - -This will create `bin/server.js`. Note that the server requires Haxe 3.4.0 or -higher. - -After building the language server, set the `cmd` setting in your setup -function: - -```lua -lspconfig.haxe_language_server.setup({ - cmd = {"node", "path/to/bin/server.js"}, -}) -``` - -By default, an HXML compiler arguments file named `build.hxml` is expected in -your project's root directory. If your file is named something different, -specify it using the `init_options.displayArguments` setting. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.haxe_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "haxe-language-server" } - ``` - - `filetypes` : - ```lua - { "haxe" } - ``` - - `init_options` : - ```lua - { - displayArguments = { "build.hxml" } - } - ``` - - `root_dir` : - ```lua - root_pattern("*.hxml") - ``` - - `settings` : - ```lua - { - haxe = { - executable = "haxe" - } - } - ``` - - -## hdl_checker - -https://github.com/suoto/hdl_checker -Language server for hdl-checker. -Install using: `pip install hdl-checker --upgrade` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hdl_checker.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hdl_checker", "--lsp" } - ``` - - `filetypes` : - ```lua - { "vhdl", "verilog", "systemverilog" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## hhvm - -Language server for programs written in Hack -https://hhvm.com/ -https://github.com/facebook/hhvm -See below for how to setup HHVM & typechecker: -https://docs.hhvm.com/hhvm/getting-started/getting-started - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hhvm.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hh_client", "lsp" } - ``` - - `filetypes` : - ```lua - { "php", "hack" } - ``` - - `root_dir` : - ```lua - root_pattern(".hhconfig") - ``` - - -## hie - -https://github.com/haskell/haskell-ide-engine - -the following init_options are supported (see https://github.com/haskell/haskell-ide-engine#configuration): -```lua -init_options = { - languageServerHaskell = { - hlintOn = bool; - maxNumberOfProblems = number; - diagnosticsDebounceDuration = number; - liquidOn = bool (default false); - completionSnippetsOn = bool (default true); - formatOnImportOn = bool (default true); - formattingProvider = string (default "brittany", alternate "floskell"); - } -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hie.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hie-wrapper", "--lsp" } - ``` - - `filetypes` : - ```lua - { "haskell" } - ``` - - `root_dir` : - ```lua - root_pattern("stack.yaml", "package.yaml", ".git") - ``` - - -## hls - -https://github.com/haskell/haskell-language-server - -Haskell Language Server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "haskell-language-server-wrapper", "--lsp" } - ``` - - `filetypes` : - ```lua - { "haskell", "lhaskell" } - ``` - - `lspinfo` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern("*.cabal", "stack.yaml", "cabal.project", "package.yaml", "hie.yaml") - ``` - - `settings` : - ```lua - { - haskell = { - formattingProvider = "ormolu" - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## hoon_ls - -https://github.com/urbit/hoon-language-server - -A language server for Hoon. - -The language server can be installed via `npm install -g @hoon-language-server` - -Start a fake ~zod with `urbit -F zod`. -Start the language server at the Urbit Dojo prompt with: `|start %language-server` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hoon_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hoon-language-server" } - ``` - - `filetypes` : - ```lua - { "hoon" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## html - -https://github.com/hrsh7th/vscode-langservers-extracted - -`vscode-html-language-server` can be installed via `npm`: -```sh -npm i -g vscode-langservers-extracted -``` - -Neovim does not currently include built-in snippets. `vscode-html-language-server` only provides completions when snippet support is enabled. -To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. - -The code-formatting feature of the lsp can be controlled with the `provideFormatter` option. - -```lua ---Enable (broadcasting) snippet capability for completion -local capabilities = vim.lsp.protocol.make_client_capabilities() -capabilities.textDocument.completion.completionItem.snippetSupport = true - -require'lspconfig'.html.setup { - capabilities = capabilities, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.html.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vscode-html-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "html" } - ``` - - `init_options` : - ```lua - { - configurationSection = { "html", "css", "javascript" }, - embeddedLanguages = { - css = true, - javascript = true - }, - provideFormatter = true - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - `single_file_support` : - ```lua - true - ``` - - -## idris2_lsp - -https://github.com/idris-community/idris2-lsp - -The Idris 2 language server. - -Plugins for the Idris 2 filetype include -[Idris2-Vim](https://github.com/edwinb/idris2-vim) (fewer features, stable) and -[Nvim-Idris2](https://github.com/ShinKage/nvim-idris2) (cutting-edge, -experimental). - -Idris2-Lsp requires a build of Idris 2 that includes the "Idris 2 API" package. -Package managers with known support for this build include the -[AUR](https://aur.archlinux.org/packages/idris2-api-git/) and -[Homebrew](https://formulae.brew.sh/formula/idris2#default). - -If your package manager does not support the Idris 2 API, you will need to build -Idris 2 from source. Refer to the -[the Idris 2 installation instructions](https://github.com/idris-lang/Idris2/blob/main/INSTALL.md) -for details. Steps 5 and 8 are listed as "optional" in that guide, but they are -necessary in order to make the Idris 2 API available. - -You need to install a version of Idris2-Lsp that is compatible with your -version of Idris 2. There should be a branch corresponding to every released -Idris 2 version after v0.4.0. Use the latest commit on that branch. For example, -if you have Idris v0.5.1, you should use the v0.5.1 branch of Idris2-Lsp. - -If your Idris 2 version is newer than the newest Idris2-Lsp branch, use the -latest commit on the `master` branch, and set a reminder to check the Idris2-Lsp -repo for the release of a compatible versioned branch. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.idris2_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "idris2-lsp" } - ``` - - `filetypes` : - ```lua - { "idris2" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## intelephense - -https://intelephense.com/ - -`intelephense` can be installed via `npm`: -```sh -npm install -g intelephense -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.intelephense.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "intelephense", "--stdio" } - ``` - - `filetypes` : - ```lua - { "php" } - ``` - - `root_dir` : - ```lua - root_pattern("composer.json", ".git") - ``` - - -## java_language_server - -https://github.com/georgewfraser/java-language-server - -Java language server - -Point `cmd` to `lang_server_linux.sh` or the equivalent script for macOS/Windows provided by java-language-server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.java_language_server.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "java" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## jdtls - -https://projects.eclipse.org/projects/eclipse.jdt.ls - -Language server for Java. - -IMPORTANT: If you want all the features jdtls has to offer, [nvim-jdtls](https://github.com/mfussenegger/nvim-jdtls) -is highly recommended. If all you need is diagnostics, completion, imports, gotos and formatting and some code actions -you can keep reading here. - -For manual installation you can download precompiled binaries from the -[official downloads site](http://download.eclipse.org/jdtls/snapshots/?d) - -Due to the nature of java, settings cannot be inferred. Please set the following -environmental variables to match your installation. If you need per-project configuration -[direnv](https://github.com/direnv/direnv) is highly recommended. - -```bash -# Mandatory: -# .bashrc -export JDTLS_HOME=/path/to/jdtls_root # Directory with the plugin and configs directories - -# Optional: -export JAVA_HOME=/path/to/java_home # In case you don't have java in path or want to use a version in particular -export WORKSPACE=/path/to/workspace # Defaults to $HOME/workspace -``` -```lua - -- init.lua - require'lspconfig'.jdtls.setup{} -``` - -For automatic installation you can use the following unofficial installers/launchers under your own risk: - - [jdtls-launcher](https://github.com/eruizc-dev/jdtls-launcher) (Includes lombok support by default) - ```lua - -- init.lua - require'lspconfig'.jdtls.setup{ cmd = { 'jdtls' } } - ``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jdtls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "/usr/lib/jvm/temurin-11-jdk-amd64/bin/java", "-Declipse.application=org.eclipse.jdt.ls.core.id1", "-Dosgi.bundles.defaultStartLevel=4", "-Declipse.product=org.eclipse.jdt.ls.core.product", "-Dlog.protocol=true", "-Dlog.level=ALL", "-Xms1g", "-Xmx2G", "--add-modules=ALL-SYSTEM", "--add-opens", "java.base/java.util=ALL-UNNAMED", "--add-opens", "java.base/java.lang=ALL-UNNAMED", "-jar", "/plugins/org.eclipse.equinox.launcher_*.jar", "-configuration", "config_linux", "-data", "/home/runner/workspace" } - ``` - - `filetypes` : - ```lua - { "java" } - ``` - - `handlers` : - ```lua - { - ["language/status"] = <function 1>, - ["textDocument/codeAction"] = <function 2>, - ["textDocument/rename"] = <function 3>, - ["workspace/applyEdit"] = <function 4> - } - ``` - - `init_options` : - ```lua - { - jvm_args = {}, - workspace = "/home/runner/workspace" - } - ``` - - `root_dir` : - ```lua - { - -- Single-module projects - { - 'build.xml', -- Ant - 'pom.xml', -- Maven - 'settings.gradle', -- Gradle - 'settings.gradle.kts', -- Gradle - }, - -- Multi-module projects - { 'build.gradle', 'build.gradle.kts' }, - } or vim.fn.getcwd() - ``` - - `single_file_support` : - ```lua - true - ``` - - -## jedi_language_server - -https://github.com/pappasam/jedi-language-server - -`jedi-language-server`, a language server for Python, built on top of jedi - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jedi_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "jedi-language-server" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - vim's starting directory - ``` - - `single_file_support` : - ```lua - true - ``` - - -## jsonls - -https://github.com/hrsh7th/vscode-langservers-extracted - -vscode-json-language-server, a language server for JSON and JSON schema - -`vscode-json-language-server` can be installed via `npm`: -```sh -npm i -g vscode-langservers-extracted -``` - -Neovim does not currently include built-in snippets. `vscode-json-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. - -```lua ---Enable (broadcasting) snippet capability for completion -local capabilities = vim.lsp.protocol.make_client_capabilities() -capabilities.textDocument.completion.completionItem.snippetSupport = true - -require'lspconfig'.jsonls.setup { - capabilities = capabilities, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jsonls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vscode-json-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "json", "jsonc" } - ``` - - `init_options` : - ```lua - { - provideFormatter = true - } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## jsonnet_ls - -https://github.com/grafana/jsonnet-language-server - -A Language Server Protocol (LSP) server for Jsonnet. - -The language server can be installed with `go`: -```sh -go install github.com/grafana/jsonnet-language-server@latest -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jsonnet_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "jsonnet-language-server" } - ``` - - `filetypes` : - ```lua - { "jsonnet", "libsonnet" } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern("jsonnetfile.json") - ``` - - -## julials - -https://github.com/julia-vscode/julia-vscode - -LanguageServer.jl can be installed with `julia` and `Pkg`: -```sh -julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.add("LanguageServer")' -``` -where `~/.julia/environments/nvim-lspconfig` is the location where -the default configuration expects LanguageServer.jl to be installed. - -To update an existing install, use the following command: -```sh -julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.update()' -``` - -Note: In order to have LanguageServer.jl pick up installed packages or dependencies in a -Julia project, you must make sure that the project is instantiated: -```sh -julia --project=/path/to/my/project -e 'using Pkg; Pkg.instantiate()' -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.julials.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "julia", "--startup-file=no", "--history-file=no", "-e", ' # Load LanguageServer.jl: attempt to load from ~/.julia/environments/nvim-lspconfig\n # with the regular load path as a fallback\n ls_install_path = joinpath(\n get(DEPOT_PATH, 1, joinpath(homedir(), ".julia")),\n "environments", "nvim-lspconfig"\n )\n pushfirst!(LOAD_PATH, ls_install_path)\n using LanguageServer\n popfirst!(LOAD_PATH)\n depot_path = get(ENV, "JULIA_DEPOT_PATH", "")\n project_path = let\n dirname(something(\n ## 1. Finds an explicitly set project (JULIA_PROJECT)\n Base.load_path_expand((\n p = get(ENV, "JULIA_PROJECT", nothing);\n p === nothing ? nothing : isempty(p) ? nothing : p\n )),\n ## 2. Look for a Project.toml file in the current working directory,\n ## or parent directories, with $HOME as an upper boundary\n Base.current_project(),\n ## 3. First entry in the load path\n get(Base.load_path(), 1, nothing),\n ## 4. Fallback to default global environment,\n ## this is more or less unreachable\n Base.load_path_expand("@v#.#"),\n ))\n end\n @info "Running language server" VERSION pwd() project_path depot_path\n server = LanguageServer.LanguageServerInstance(stdin, stdout, project_path, depot_path)\n server.runlinter = true\n run(server)\n ' } - ``` - - `filetypes` : - ```lua - { "julia" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## kotlin_language_server - - A kotlin language server which was developed for internal usage and - released afterwards. Maintaining is not done by the original author, - but by fwcd. - - It is built via gradle and developed on github. - Source and additional description: - https://github.com/fwcd/kotlin-language-server - - This server requires vim to be aware of the kotlin-filetype. - You could refer for this capability to: - https://github.com/udalov/kotlin-vim (recommended) - Note that there is no LICENSE specified yet. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.kotlin_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "kotlin-language-server" } - ``` - - `filetypes` : - ```lua - { "kotlin" } - ``` - - `root_dir` : - ```lua - root_pattern("settings.gradle") - ``` - - -## lean3ls - -https://github.com/leanprover/lean-client-js/tree/master/lean-language-server - -Lean installation instructions can be found -[here](https://leanprover-community.github.io/get_started.html#regular-install). - -Once Lean is installed, you can install the Lean 3 language server by running -```sh -npm install -g lean-language-server -``` - -Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim), -that plugin fully handles the setup of the Lean language server, -and you shouldn't set up `lean3ls` both with it and `lspconfig`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.lean3ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lean-language-server", "--stdio", "--", "-M", "4096", "-T", "100000" } - ``` - - `filetypes` : - ```lua - { "lean3" } - ``` - - `offset_encoding` : - ```lua - "utf-32" - ``` - - `root_dir` : - ```lua - root_pattern("leanpkg.toml") or root_pattern(".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## leanls - -https://github.com/leanprover/lean4 - -Lean installation instructions can be found -[here](https://leanprover-community.github.io/get_started.html#regular-install). - -The Lean 4 language server is built-in with a Lean 4 install -(and can be manually run with, e.g., `lean --server`). - -Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim), -that plugin fully handles the setup of the Lean language server, -and you shouldn't set up `leanls` both with it and `lspconfig`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.leanls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lake", "serve", "--" } - ``` - - `filetypes` : - ```lua - { "lean" } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `options` : - ```lua - { - no_lake_lsp_cmd = { "lean", "--server" } - } - ``` - - `root_dir` : - ```lua - root_pattern("lakefile.lean", "lean-toolchain", "leanpkg.toml", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## lelwel_ls - -https://github.com/0x2a-42/lelwel - -Language server for lelwel grammars. - -You can install `lelwel-ls` via cargo: -```sh -cargo install --features="lsp" lelwel -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.lelwel_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lelwel-ls" } - ``` - - `filetypes` : - ```lua - { "llw" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## lemminx - -https://github.com/eclipse/lemminx - -The easiest way to install the server is to get a binary at https://download.jboss.org/jbosstools/vscode/stable/lemminx-binary/ and place it in your PATH. - -NOTE to macOS users: Binaries from unidentified developers are blocked by default. If you trust the downloaded binary from jboss.org, run it once, cancel the prompt, then remove the binary from Gatekeeper quarantine with `xattr -d com.apple.quarantine lemminx`. It should now run without being blocked. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.lemminx.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lemminx" } - ``` - - `filetypes` : - ```lua - { "xml", "xsd", "xsl", "xslt", "svg" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## ltex - -https://github.com/valentjn/ltex-ls - -LTeX Language Server: LSP language server for LanguageTool 🔍✔️ with support for LaTeX 🎓, Markdown 📝, and others - -To install, download the latest [release](https://github.com/valentjn/ltex-ls/releases) and ensure `ltex-ls` is on your path. - -To support org files or R sweave, users can define a custom filetype autocommand (or use a plugin which defines these filetypes): - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.org set filetype=org ]] -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ltex.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ltex-ls" } - ``` - - `filetypes` : - ```lua - { "bib", "gitcommit", "markdown", "org", "plaintex", "rst", "rnoweb", "tex" } - ``` - - `get_language_id` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## metals - -https://scalameta.org/metals/ - -Scala language server with rich IDE features. - -See full instructions in the Metals documentation: - -https://scalameta.org/metals/docs/editors/vim.html#using-an-alternative-lsp-client - -Note: that if you're using [nvim-metals](https://github.com/scalameta/nvim-metals), that plugin fully handles the setup and installation of Metals, and you shouldn't set up Metals both with it and `lspconfig`. - -To install Metals, make sure to have [coursier](https://get-coursier.io/docs/cli-installation) installed, and once you do you can install the latest Metals with `cs install metals`. You can also manually bootstrap Metals with the following command. - -```bash -cs bootstrap \ - --java-opt -Xss4m \ - --java-opt -Xms100m \ - org.scalameta:metals_2.12:<enter-version-here> \ - -r bintray:scalacenter/releases \ - -r sonatype:snapshots \ - -o /usr/local/bin/metals -f -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.metals.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "metals" } - ``` - - `filetypes` : - ```lua - { "scala" } - ``` - - `init_options` : - ```lua - { - compilerOptions = { - snippetAutoIndent = false - }, - isHttpEnabled = true, - statusBarProvider = "show-message" - } - ``` - - `message_level` : - ```lua - 4 - ``` - - `root_dir` : - ```lua - util.root_pattern("build.sbt", "build.sc", "build.gradle", "pom.xml") - ``` - - -## mint - -https://www.mint-lang.com - -Install Mint using the [instructions](https://www.mint-lang.com/install). -The language server is included since version 0.12.0. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.mint.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "mint", "ls" } - ``` - - `filetypes` : - ```lua - { "mint" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## mm0_ls - -https://github.com/digama0/mm0 - -Language Server for the metamath-zero theorem prover. - -Requires [mm0-rs](https://github.com/digama0/mm0/tree/master/mm0-rs) to be installed -and available on the `PATH`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.mm0_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "mm0-rs", "server" } - ``` - - `filetypes` : - ```lua - { "metamath-zero" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## nickel_ls - -Nickel Language Server - -https://github.com/tweag/nickel - -`nls` can be installed with nix, or cargo, from the Nickel repository. -```sh -git clone https://github.com/tweag/nickel.git -``` - -Nix: -```sh -cd nickel -nix-env -f . -i -``` - -cargo: -```sh -cd nickel/lsp/nls -cargo install --path . -``` - -In order to have lspconfig detect Nickel filetypes (a prequisite for autostarting a server), -install the [Nickel vim plugin](https://github.com/nickel-lang/vim-nickel). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.nickel_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "nls" } - ``` - - `filetypes` : - ```lua - { "ncl", "nickel" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## nimls - -https://github.com/PMunch/nimlsp -`nimlsp` can be installed via the `nimble` package manager: -```sh -nimble install nimlsp -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.nimls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "nimlsp" } - ``` - - `filetypes` : - ```lua - { "nim" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## ocamlls - -https://github.com/ocaml-lsp/ocaml-language-server - -`ocaml-language-server` can be installed via `npm` -```sh -npm install -g ocaml-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ocamlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ocaml-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "ocaml", "reason" } - ``` - - `root_dir` : - ```lua - root_pattern("*.opam", "esy.json", "package.json") - ``` - - -## ocamllsp - -https://github.com/ocaml/ocaml-lsp - -`ocaml-lsp` can be installed as described in [installation guide](https://github.com/ocaml/ocaml-lsp#installation). - -To install the lsp server in a particular opam switch: -```sh -opam pin add ocaml-lsp-server https://github.com/ocaml/ocaml-lsp.git -opam install ocaml-lsp-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ocamllsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ocamllsp" } - ``` - - `filetypes` : - ```lua - { "ocaml", "ocaml.menhir", "ocaml.interface", "ocaml.ocamllex", "reason" } - ``` - - `get_language_id` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern("*.opam", "esy.json", "package.json", ".git") - ``` - - -## ols - - https://github.com/DanielGavin/ols - - `Odin Language Server`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ols.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ols" } - ``` - - `filetypes` : - ```lua - { "odin" } - ``` - - `root_dir` : - ```lua - util.root_pattern("ols.json", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## omnisharp - -https://github.com/omnisharp/omnisharp-roslyn -OmniSharp server based on Roslyn workspaces - -`omnisharp-roslyn` can be installed by downloading and extracting a release from [here](https://github.com/OmniSharp/omnisharp-roslyn/releases). -Omnisharp can also be built from source by following the instructions [here](https://github.com/omnisharp/omnisharp-roslyn#downloading-omnisharp). - -Omnisharp requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -**By default, omnisharp-roslyn doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. - -```lua -local pid = vim.fn.getpid() --- On linux/darwin if using a release build, otherwise under scripts/OmniSharp(.Core)(.cmd) -local omnisharp_bin = "/path/to/omnisharp-repo/run" --- on Windows --- local omnisharp_bin = "/path/to/omnisharp/OmniSharp.exe" -require'lspconfig'.omnisharp.setup{ - cmd = { omnisharp_bin, "--languageserver" , "--hostPID", tostring(pid) }; - ... -} -``` - -Note, if you download the executable for darwin you will need to strip the quarantine label to run: -```bash -find /path/to/omnisharp-osx | xargs xattr -r -d com.apple.quarantine -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.omnisharp.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "cs", "vb" } - ``` - - `init_options` : - ```lua - {} - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern(".sln") or root_pattern(".csproj") - ``` - - -## opencl_ls - -https://github.com/Galarius/opencl-language-server - -Build instructions can be found [here](https://github.com/Galarius/opencl-language-server/blob/main/_dev/build.md). - -Prebuilt binaries are available for Linux, macOS and Windows [here](https://github.com/Galarius/opencl-language-server/releases). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.opencl_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "opencl-language-server" } - ``` - - `filetypes` : - ```lua - { "opencl" } - ``` - - `root_dir` : - ```lua - util.root_pattern(".git") - ``` - - -## openscad_ls - -https://github.com/dzhu/openscad-language-server - -A Language Server Protocol server for OpenSCAD - -You can build and install `openscad-language-server` binary with `cargo`: -```sh -cargo install openscad-language-server -``` - -Vim does not have built-in syntax for the `openscad` filetype currently. - -This can be added via an autocmd: - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.scad set filetype=openscad ]] -``` - -or by installing a filetype plugin such as https://github.com/sirtaj/vim-openscad - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.openscad_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "openscad-language-server" } - ``` - - `filetypes` : - ```lua - { "openscad" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## pasls - -https://github.com/genericptr/pascal-language-server - -An LSP server implementation for Pascal variants that are supported by Free Pascal, including Object Pascal. It uses CodeTools from Lazarus as backend. - -First set `cmd` to the Pascal lsp binary. - -Customization options are passed to pasls as environment variables for example in your `.bashrc`: -```bash -export FPCDIR='/usr/lib/fpc/src' # FPC source directory (This is the only required option for the server to work). -export PP='/usr/lib/fpc/3.2.2/ppcx64' # Path to the Free Pascal compiler executable. -export LAZARUSDIR='/usr/lib/lazarus' # Path to the Lazarus sources. -export FPCTARGET='' # Target operating system for cross compiling. -export FPCTARGETCPU='x86_64' # Target CPU for cross compiling. -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pasls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pasls" } - ``` - - `filetypes` : - ```lua - { "pascal" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## perlls - -https://github.com/richterger/Perl-LanguageServer/tree/master/clients/vscode/perl - -`Perl-LanguageServer`, a language server for Perl. - -To use the language server, ensure that you have Perl::LanguageServer installed and perl command is on your path. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.perlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "perl", "-MPerl::LanguageServer", "-e", "Perl::LanguageServer::run", "--", "--port 13603", "--nostdio 0", "--version 2.1.0" } - ``` - - `filetypes` : - ```lua - { "perl" } - ``` - - `root_dir` : - ```lua - vim's starting directory - ``` - - `settings` : - ```lua - { - perl = { - fileFilter = { ".pm", ".pl" }, - ignoreDirs = ".git", - perlCmd = "perl", - perlInc = " " - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## perlnavigator - -https://github.com/bscan/PerlNavigator - -A Perl language server - -**By default, perlnavigator doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -Clone the PerlNavigator repo, install based on the [instructions](https://github.com/bscan/PerlNavigator#installation-for-other-editors), -and point `cmd` to `server.js` inside the `server/out` directory: - -```lua -cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'} -``` - -At minimum, you will need `perl` in your path. If you want to use a non-standard `perl` you will need to set your configuration like so: -```lua -settings = { - perlnavigator = { - perlPath = '/some/odd/location/my-perl' - } -} -``` - -The `contributes.configuration.properties` section of `perlnavigator`'s `package.json` has all available configuration settings. All -settings have a reasonable default, but, at minimum, you may want to point `perlnavigator` at your `perltidy` and `perlcritic` configurations. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.perlnavigator.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - {} - ``` - - `filetypes` : - ```lua - { "perl" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## perlpls - -https://github.com/FractalBoy/perl-language-server -https://metacpan.org/pod/PLS - -`PLS`, another language server for Perl. - -To use the language server, ensure that you have PLS installed and that it is in your path - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.perlpls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pls" } - ``` - - `filetypes` : - ```lua - { "perl" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `settings` : - ```lua - { - perl = { - perlcritic = { - enabled = false - }, - syntax = { - enabled = true - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## phpactor - -https://github.com/phpactor/phpactor - -Installation: https://phpactor.readthedocs.io/en/master/usage/standalone.html#global-installation - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.phpactor.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "phpactor", "language-server" } - ``` - - `filetypes` : - ```lua - { "php" } - ``` - - `root_dir` : - ```lua - root_pattern("composer.json", ".git") - ``` - - -## please - -https://github.com/thought-machine/please - -High-performance extensible build system for reproducible multi-language builds. - -The `plz` binary will automatically install the LSP for you on first run - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.please.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "plz", "tool", "lps" } - ``` - - `filetypes` : - ```lua - { "bzl" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## powershell_es - -https://github.com/PowerShell/PowerShellEditorServices - -Language server for PowerShell. - -To install, download and extract PowerShellEditorServices.zip -from the [releases](https://github.com/PowerShell/PowerShellEditorServices/releases). -To configure the language server, set the property `bundle_path` to the root -of the extracted PowerShellEditorServices.zip. - -The default configuration doesn't set `cmd` unless `bundle_path` is specified. - -```lua -require'lspconfig'.powershell_es.setup{ - bundle_path = 'c:/w/PowerShellEditorServices', -} -``` - -By default the languageserver is started in `pwsh` (PowerShell Core). This can be changed by specifying `shell`. - -```lua -require'lspconfig'.powershell_es.setup{ - bundle_path = 'c:/w/PowerShellEditorServices', - shell = 'powershell.exe', -} -``` - -Note that the execution policy needs to be set to `Unrestricted` for the languageserver run under PowerShell - -If necessary, specific `cmd` can be defined instead of `bundle_path`. -See [PowerShellEditorServices](https://github.com/PowerShell/PowerShellEditorServices#stdio) -to learn more. - -```lua -require'lspconfig'.powershell_es.setup{ - cmd = {'pwsh', '-NoLogo', '-NoProfile', '-Command', "c:/PSES/Start-EditorServices.ps1 ..."} -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.powershell_es.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "ps1" } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - git root or current directory - ``` - - `shell` : - ```lua - "pwsh" - ``` - - `single_file_support` : - ```lua - true - ``` - - -## prismals - -Language Server for the Prisma JavaScript and TypeScript ORM - -`@prisma/language-server` can be installed via npm -```sh -npm install -g @prisma/language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.prismals.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "prisma-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "prisma" } - ``` - - `root_dir` : - ```lua - root_pattern(".git", "package.json") - ``` - - `settings` : - ```lua - { - prisma = { - prismaFmtBinPath = "" - } - } - ``` - - -## prosemd_lsp - -https://github.com/kitten/prosemd-lsp - -An experimental LSP for Markdown. - -Please see the manual installation instructions: https://github.com/kitten/prosemd-lsp#manual-installation - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.prosemd_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "prosemd-lsp", "--stdio" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - <function 1> - ``` - - `single_file_support` : - ```lua - true - ``` - - -## psalm - -https://github.com/vimeo/psalm - -Can be installed with composer. -```sh -composer global require vimeo/psalm -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.psalm.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "psalm-language-server" } - ``` - - `filetypes` : - ```lua - { "php" } - ``` - - `root_dir` : - ```lua - root_pattern("psalm.xml", "psalm.xml.dist") - ``` - - -## puppet - -LSP server for Puppet. - -Installation: - -- Clone the editor-services repository: - https://github.com/puppetlabs/puppet-editor-services - -- Navigate into that directory and run: `bundle install` - -- Install the 'puppet-lint' gem: `gem install puppet-lint` - -- Add that repository to $PATH. - -- Ensure you can run `puppet-languageserver` from outside the editor-services directory. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.puppet.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "puppet-languageserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "puppet" } - ``` - - `root_dir` : - ```lua - root_pattern("manifests", ".puppet-lint.rc", "hiera.yaml", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## purescriptls - -https://github.com/nwolverson/purescript-language-server -`purescript-language-server` can be installed via `npm` -```sh -npm install -g purescript-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.purescriptls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "purescript-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "purescript" } - ``` - - `root_dir` : - ```lua - root_pattern("spago.dhall, 'psc-package.json', bower.json") - ``` - - -## pylsp - -https://github.com/python-lsp/python-lsp-server - -A Python 3.6+ implementation of the Language Server Protocol. - -The language server can be installed via `pipx install 'python-lsp-server[all]'`. -Further instructions can be found in the [project's README](https://github.com/python-lsp/python-lsp-server). - -Note: This is a community fork of `pyls`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pylsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pylsp" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## pyre - -https://pyre-check.org/ - -`pyre` a static type checker for Python 3. - -`pyre` offers an extremely limited featureset. It currently only supports diagnostics, -which are triggered on save. - -Do not report issues for missing features in `pyre` to `lspconfig`. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pyre.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pyre", "persistent" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## pyright - -https://github.com/microsoft/pyright - -`pyright`, a static type checker and language server for python - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pyright.setup{} -``` -**Commands:** -- PyrightOrganizeImports: Organize Imports - -**Default values:** - - `cmd` : - ```lua - { "pyright-langserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - python = { - analysis = { - autoSearchPaths = true, - diagnosticMode = "workspace", - useLibraryCodeForTypes = true - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## quick_lint_js - -https://quick-lint-js.com/ - -quick-lint-js finds bugs in JavaScript programs. - -See installation [instructions](https://quick-lint-js.com/install/) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.quick_lint_js.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "quick-lint-js", "--lsp-server" } - ``` - - `filetypes` : - ```lua - { "javascript" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## r_language_server - -[languageserver](https://github.com/REditorSupport/languageserver) is an -implementation of the Microsoft's Language Server Protocol for the R -language. - -It is released on CRAN and can be easily installed by - -```R -install.packages("languageserver") -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.r_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "R", "--slave", "-e", "languageserver::run()" } - ``` - - `filetypes` : - ```lua - { "r", "rmd" } - ``` - - `log_level` : - ```lua - 2 - ``` - - `root_dir` : - ```lua - root_pattern(".git") or os_homedir - ``` - - -## racket_langserver - -[https://github.com/jeapostrophe/racket-langserver](https://github.com/jeapostrophe/racket-langserver) - -The Racket language server. This project seeks to use -[DrRacket](https://github.com/racket/drracket)'s public API to provide -functionality that mimics DrRacket's code tools as closely as possible. - -Install via `raco`: `raco pkg install racket-langserver` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.racket_langserver.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "racket", "--lib", "racket-langserver" } - ``` - - `filetypes` : - ```lua - { "racket", "scheme" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## reason_ls - -Reason language server - -**By default, reason_ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -You can install reason language server from [reason-language-server](https://github.com/jaredly/reason-language-server) repository. - -```lua -cmd = {'<path_to_reason_language_server>'} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.reason_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "reason-language-server" } - ``` - - `filetypes` : - ```lua - { "reason" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## remark_ls - -https://github.com/remarkjs/remark-language-server - -`remark-language-server` can be installed via `npm`: -```sh -npm install -g remark-language-server -``` - -`remark-language-server` uses the same -[configuration files](https://github.com/remarkjs/remark/tree/main/packages/remark-cli#example-config-files-json-yaml-js) -as `remark-cli`. - -This uses a plugin based system. Each plugin needs to be installed locally using `npm` or `yarn`. - -For example, given the following `.remarkrc.json`: - -```json -{ - "presets": [ - "remark-preset-lint-recommended" - ] -} -``` - -`remark-preset-lint-recommended` needs to be installed in the local project: - -```sh -npm install remark-preset-lint-recommended -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.remark_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "remark-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## rescriptls - -https://github.com/rescript-lang/rescript-vscode - -ReScript language server - -**By default, rescriptls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -You can use the bundled language server inside the [vim-rescript](https://github.com/rescript-lang/vim-rescript) repo. - -Clone the vim-rescript repo and point `cmd` to `server.js` inside `server/out` directory: - -```lua -cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'} - -``` - -If you have vim-rescript installed you can also use that installation. for example if you're using packer.nvim you can set cmd to something like this: - -```lua -cmd = { - 'node', - '/home/username/.local/share/nvim/site/pack/packer/start/vim-rescript/server/out/server.js', - '--stdio' -} -``` - -Another option is to use vscode extension [release](https://github.com/rescript-lang/rescript-vscode/releases). -Take a look at [here](https://github.com/rescript-lang/rescript-vscode#use-with-other-editors) for instructions. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rescriptls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - {} - ``` - - `filetypes` : - ```lua - { "rescript" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## rls - -https://github.com/rust-lang/rls - -rls, a language server for Rust - -See https://github.com/rust-lang/rls#setup to setup rls itself. -See https://github.com/rust-lang/rls#configuration for rls-specific settings. -All settings listed on the rls configuration section of the readme -must be set under settings.rust as follows: - -```lua -nvim_lsp.rls.setup { - settings = { - rust = { - unstable_features = true, - build_on_save = false, - all_features = true, - }, - }, -} -``` - -If you want to use rls for a particular build, eg nightly, set cmd as follows: - -```lua -cmd = {"rustup", "run", "nightly", "rls"} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "rls" } - ``` - - `filetypes` : - ```lua - { "rust" } - ``` - - `root_dir` : - ```lua - root_pattern("Cargo.toml") - ``` - - -## rnix - -https://github.com/nix-community/rnix-lsp - -A language server for Nix providing basic completion and formatting via nixpkgs-fmt. - -To install manually, run `cargo install rnix-lsp`. If you are using nix, rnix-lsp is in nixpkgs. - -This server accepts configuration via the `settings` key. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rnix.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "rnix-lsp" } - ``` - - `filetypes` : - ```lua - { "nix" } - ``` - - `init_options` : - ```lua - {} - ``` - - `root_dir` : - ```lua - vim's starting directory - ``` - - `settings` : - ```lua - {} - ``` - - -## robotframework_ls - -https://github.com/robocorp/robotframework-lsp - -Language Server Protocol implementation for Robot Framework. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.robotframework_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "robotframework_ls" } - ``` - - `filetypes` : - ```lua - { "robot" } - ``` - - `root_dir` : - ```lua - util.root_pattern('robotidy.toml', 'pyproject.toml')(fname) or util.find_git_ancestor(fname) - ``` - - -## rome - -https://rome.tools - -Language server for the Rome Frontend Toolchain. - -```sh -npm install [-g] rome -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rome.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "rome", "lsp" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "json", "typescript", "typescript.tsx", "typescriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern('package.json', 'node_modules', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## rust_analyzer - -https://github.com/rust-analyzer/rust-analyzer - -rust-analyzer (aka rls 2.0), a language server for Rust - -See [docs](https://github.com/rust-analyzer/rust-analyzer/tree/master/docs/user#settings) for extra settings. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rust_analyzer.setup{} -``` -**Commands:** -- CargoReload: Reload current cargo workspace - -**Default values:** - - `cmd` : - ```lua - { "rust-analyzer" } - ``` - - `filetypes` : - ```lua - { "rust" } - ``` - - `root_dir` : - ```lua - root_pattern("Cargo.toml", "rust-project.json") - ``` - - `settings` : - ```lua - { - ["rust-analyzer"] = {} - } - ``` - - -## salt_ls - -Language server for Salt configuration files. -https://github.com/dcermak/salt-lsp - -The language server can be installed with `pip`: -```sh -pip install salt-lsp -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.salt_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "salt_lsp_server" } - ``` - - `filetypes` : - ```lua - { "sls" } - ``` - - `root_dir` : - ```lua - root_pattern('.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## scry - -https://github.com/crystal-lang-tools/scry - -Crystal language server. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.scry.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "scry" } - ``` - - `filetypes` : - ```lua - { "crystal" } - ``` - - `root_dir` : - ```lua - root_pattern('shard.yml', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## serve_d - - https://github.com/Pure-D/serve-d - - `Microsoft language server protocol implementation for D using workspace-d.` - Download a binary from https://github.com/Pure-D/serve-d/releases and put it in your $PATH. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.serve_d.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "serve-d" } - ``` - - `filetypes` : - ```lua - { "d" } - ``` - - `root_dir` : - ```lua - util.root_pattern("dub.json", "dub.sdl", ".git") - ``` - - -## sixtyfps - -https://github.com/sixtyfpsui/sixtyfps -`SixtyFPS`'s language server - -You can build and install `sixtyfps-lsp` binary with `cargo`: -```sh -cargo install sixtyfps-lsp -``` - -Vim does not have built-in syntax for the `sixtyfps` filetype currently. - -This can be added via an autocmd: - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.60 set filetype=sixtyfps ]] -``` - -or by installing a filetype plugin such as https://github.com/RustemB/sixtyfps-vim - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sixtyfps.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sixtyfps-lsp" } - ``` - - `filetypes` : - ```lua - { "sixtyfps" } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## slint_lsp - -https://github.com/slint-ui/slint -`Slint`'s language server - -You can build and install `slint-lsp` binary with `cargo`: -```sh -cargo install slint-lsp -``` - -Vim does not have built-in syntax for the `slint` filetype at this time. - -This can be added via an autocmd: - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.slint set filetype=slint ]] -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.slint_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "slint-lsp" } - ``` - - `filetypes` : - ```lua - { "slint" } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## solang - -A language server for Solidity - -See the [documentation](https://solang.readthedocs.io/en/latest/installing.html) for installation instructions. - -The language server only provides the following capabilities: -* Syntax highlighting -* Diagnostics -* Hover - -There is currently no support for completion, goto definition, references, or other functionality. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solang.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solang", "--language-server", "--target", "ewasm" } - ``` - - `filetypes` : - ```lua - { "solidity" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## solargraph - -https://solargraph.org/ - -solargraph, a language server for Ruby - -You can install solargraph via gem install. - -```sh -gem install --user-install solargraph -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solargraph.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solargraph", "stdio" } - ``` - - `filetypes` : - ```lua - { "ruby" } - ``` - - `init_options` : - ```lua - { - formatting = true - } - ``` - - `root_dir` : - ```lua - root_pattern("Gemfile", ".git") - ``` - - `settings` : - ```lua - { - solargraph = { - diagnostics = true - } - } - ``` - - -## solc - -https://docs.soliditylang.org/en/latest/installing-solidity.html - -solc is the native language server for the Solidity language. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solc.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solc", "--lsp" } - ``` - - `filetypes` : - ```lua - { "solidity" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - -## solidity_ls - -npm install -g solidity-language-server - -solidity-language-server is a language server for the solidity language ported from the vscode solidity extension - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solidity_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solidity-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "solidity" } - ``` - - `root_dir` : - ```lua - root_pattern(".git", "package.json") - ``` - - -## sorbet - -https://sorbet.org - -Sorbet is a fast, powerful type checker designed for Ruby. - -You can install Sorbet via gem install. You might also be interested in how to set -Sorbet up for new projects: https://sorbet.org/docs/adopting. - -```sh -gem install sorbet -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sorbet.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "srb", "tc", "--lsp" } - ``` - - `filetypes` : - ```lua - { "ruby" } - ``` - - `root_dir` : - ```lua - root_pattern("Gemfile", ".git") - ``` - - -## sourcekit - -https://github.com/apple/sourcekit-lsp - -Language server for Swift and C/C++/Objective-C. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sourcekit.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sourcekit-lsp" } - ``` - - `filetypes` : - ```lua - { "swift", "c", "cpp", "objective-c", "objective-cpp" } - ``` - - `root_dir` : - ```lua - root_pattern("Package.swift", ".git") - ``` - - -## sourcery - -https://github.com/sourcery-ai/sourcery - -Refactor Python instantly using the power of AI. - -It requires the initializationOptions param to be populated as shown below and will respond with the list of ServerCapabilities that it supports. - -init_options = { - --- The Sourcery token for authenticating the user. - --- This is retrieved from the Sourcery website and must be - --- provided by each user. The extension must provide a - --- configuration option for the user to provide this value. - token = <YOUR_TOKEN> - - --- The extension's name and version as defined by the extension. - extension_version = 'vim.lsp' - - --- The editor's name and version as defined by the editor. - editor_version = 'vim' -} - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sourcery.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sourcery", "lsp" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `init_options` : - ```lua - { - editor_version = "vim", - extension_version = "vim.lsp" - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## spectral - -https://github.com/luizcorreia/spectral-language-server - `A flexible JSON/YAML linter for creating automated style guides, with baked in support for OpenAPI v2 & v3.` - -`spectral-language-server` can be installed via `npm`: -```sh -npm i -g spectral-language-server -``` -See [vscode-spectral](https://github.com/stoplightio/vscode-spectral#extension-settings) for configuration options. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.spectral.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "spectral-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "yaml", "json", "yml" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - enable = true, - run = "onType", - validateLanguages = { "yaml", "json", "yml" } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## sqlls - -https://github.com/joe-re/sql-language-server - -This LSP can be installed via `npm`. Find further instructions on manual installation of the sql-language-server at [joe-re/sql-language-server](https://github.com/joe-re/sql-language-server). -<br> - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sqlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sql-language-server", "up", "--method", "stdio" } - ``` - - `filetypes` : - ```lua - { "sql", "mysql" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## sqls - -https://github.com/lighttiger2505/sqls - -```lua -require'lspconfig'.sqls.setup{ - cmd = {"path/to/command", "-config", "path/to/config.yml"}; - ... -} -``` -Sqls can be installed via `go get github.com/lighttiger2505/sqls`. Instructions for compiling Sqls from the source can be found at [lighttiger2505/sqls](https://github.com/lighttiger2505/sqls). - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sqls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sqls" } - ``` - - `filetypes` : - ```lua - { "sql", "mysql" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - `single_file_support` : - ```lua - true - ``` - - -## stylelint_lsp - -https://github.com/bmatcuk/stylelint-lsp - -`stylelint-lsp` can be installed via `npm`: - -```sh -npm i -g stylelint-lsp -``` - -Can be configured by passing a `settings.stylelintplus` object to `stylelint_lsp.setup`: - -```lua -require'lspconfig'.stylelint_lsp.setup{ - settings = { - stylelintplus = { - -- see available options in stylelint-lsp documentation - } - } -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.stylelint_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "stylelint-lsp", "--stdio" } - ``` - - `filetypes` : - ```lua - { "css", "less", "scss", "sugarss", "vue", "wxss", "javascript", "javascriptreact", "typescript", "typescriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern('.stylelintrc', 'package.json') - ``` - - `settings` : - ```lua - {} - ``` - - -## sumneko_lua - -https://github.com/sumneko/lua-language-server - -Lua language server. - -`lua-language-server` can be installed by following the instructions [here](https://github.com/sumneko/lua-language-server/wiki/Build-and-Run). The default `cmd` assumes that the `lua-language-server` binary can be found in `$PATH`. - -```lua -local runtime_path = vim.split(package.path, ';') -table.insert(runtime_path, "lua/?.lua") -table.insert(runtime_path, "lua/?/init.lua") - -require'lspconfig'.sumneko_lua.setup { - settings = { - Lua = { - runtime = { - -- Tell the language server which version of Lua you're using (most likely LuaJIT in the case of Neovim) - version = 'LuaJIT', - -- Setup your lua path - path = runtime_path, - }, - diagnostics = { - -- Get the language server to recognize the `vim` global - globals = {'vim'}, - }, - workspace = { - -- Make the server aware of Neovim runtime files - library = vim.api.nvim_get_runtime_file("", true), - }, - -- Do not send telemetry data containing a randomized but unique identifier - telemetry = { - enable = false, - }, - }, - }, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sumneko_lua.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lua-language-server" } - ``` - - `filetypes` : - ```lua - { "lua" } - ``` - - `log_level` : - ```lua - 2 - ``` - - `root_dir` : - ```lua - root_pattern(".luarc.json", ".luacheckrc", ".stylua.toml", "selene.toml", ".git") - ``` - - `settings` : - ```lua - { - Lua = { - telemetry = { - enable = false - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## svelte - -https://github.com/sveltejs/language-tools/tree/master/packages/language-server - -`svelte-language-server` can be installed via `npm`: -```sh -npm install -g svelte-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.svelte.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "svelteserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "svelte" } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", ".git") - ``` - - -## svls - -https://github.com/dalance/svls - -Language server for verilog and SystemVerilog - -`svls` can be installed via `cargo`: - ```sh - cargo install svls - ``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.svls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "svls" } - ``` - - `filetypes` : - ```lua - { "verilog", "systemverilog" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## tailwindcss - -https://github.com/tailwindlabs/tailwindcss-intellisense - -Tailwind CSS Language Server can be installed via npm: -```sh -npm install -g @tailwindcss/language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.tailwindcss.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "tailwindcss-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "aspnetcorerazor", "astro", "astro-markdown", "blade", "django-html", "htmldjango", "edge", "eelixir", "ejs", "erb", "eruby", "gohtml", "haml", "handlebars", "hbs", "html", "html-eex", "heex", "jade", "leaf", "liquid", "markdown", "mdx", "mustache", "njk", "nunjucks", "php", "razor", "slim", "twig", "css", "less", "postcss", "sass", "scss", "stylus", "sugarss", "javascript", "javascriptreact", "reason", "rescript", "typescript", "typescriptreact", "vue", "svelte" } - ``` - - `init_options` : - ```lua - { - userLanguages = { - eelixir = "html-eex", - eruby = "erb" - } - } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern('tailwind.config.js', 'tailwind.config.ts', 'postcss.config.js', 'postcss.config.ts', 'package.json', 'node_modules', '.git') - ``` - - `settings` : - ```lua - { - tailwindCSS = { - classAttributes = { "class", "className", "classList", "ngClass" }, - lint = { - cssConflict = "warning", - invalidApply = "error", - invalidConfigPath = "error", - invalidScreen = "error", - invalidTailwindDirective = "error", - invalidVariant = "error", - recommendedVariantOrder = "warning" - }, - validate = true - } - } - ``` - - -## taplo - -https://taplo.tamasfe.dev/lsp/ - -Language server for Taplo, a TOML toolkit. - -`taplo-cli` can be installed via `cargo`: -```sh -cargo install --locked taplo-cli -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.taplo.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "taplo", "lsp", "stdio" } - ``` - - `filetypes` : - ```lua - { "toml" } - ``` - - `root_dir` : - ```lua - root_pattern("*.toml", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## teal_ls - -https://github.com/teal-language/teal-language-server - -Install with: -``` -luarocks install --dev teal-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.teal_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "teal-language-server" } - ``` - - `filetypes` : - ```lua - { "teal" } - ``` - - `root_dir` : - ```lua - root_pattern("tlconfig.lua", ".git") - ``` - - -## terraform_lsp - -https://github.com/juliosueiras/terraform-lsp - -Terraform language server -Download a released binary from -https://github.com/juliosueiras/terraform-lsp/releases. - -From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp: - -Both HashiCorp and the maintainer of terraform-lsp expressed interest in -collaborating on a language server and are working towards a _long-term_ -goal of a single stable and feature-complete implementation. - -For the time being both projects continue to exist, giving users the -choice: - -- `terraform-ls` providing - - overall stability (by relying only on public APIs) - - compatibility with any provider and any Terraform >=0.12.0 currently - less features - - due to project being younger and relying on public APIs which may - not offer the same functionality yet - -- `terraform-lsp` providing - - currently more features - - compatibility with a single particular Terraform (0.12.20 at time of writing) - - configs designed for other 0.12 versions may work, but interpretation may be inaccurate - - less stability (due to reliance on Terraform's own internal packages) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.terraform_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "terraform-lsp" } - ``` - - `filetypes` : - ```lua - { "terraform", "hcl" } - ``` - - `root_dir` : - ```lua - root_pattern(".terraform", ".git") - ``` - - -## terraformls - -https://github.com/hashicorp/terraform-ls - -Terraform language server -Download a released binary from https://github.com/hashicorp/terraform-ls/releases. - -From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp: - -Both HashiCorp and the maintainer of terraform-lsp expressed interest in -collaborating on a language server and are working towards a _long-term_ -goal of a single stable and feature-complete implementation. - -For the time being both projects continue to exist, giving users the -choice: - -- `terraform-ls` providing - - overall stability (by relying only on public APIs) - - compatibility with any provider and any Terraform >=0.12.0 currently - less features - - due to project being younger and relying on public APIs which may - not offer the same functionality yet - -- `terraform-lsp` providing - - currently more features - - compatibility with a single particular Terraform (0.12.20 at time of writing) - - configs designed for other 0.12 versions may work, but interpretation may be inaccurate - - less stability (due to reliance on Terraform's own internal packages) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.terraformls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "terraform-ls", "serve" } - ``` - - `filetypes` : - ```lua - { "terraform" } - ``` - - `root_dir` : - ```lua - root_pattern(".terraform", ".git") - ``` - - -## texlab - -https://github.com/latex-lsp/texlab - -A completion engine built from scratch for (La)TeX. - -See https://github.com/latex-lsp/texlab/blob/master/docs/options.md for configuration options. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.texlab.setup{} -``` -**Commands:** -- TexlabBuild: Build the current buffer -- TexlabForward: Forward search from current position - -**Default values:** - - `cmd` : - ```lua - { "texlab" } - ``` - - `filetypes` : - ```lua - { "tex", "bib" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - texlab = { - auxDirectory = ".", - bibtexFormatter = "texlab", - build = { - args = { "-pdf", "-interaction=nonstopmode", "-synctex=1", "%f" }, - executable = "latexmk", - forwardSearchAfter = false, - onSave = false - }, - chktex = { - onEdit = false, - onOpenAndSave = false - }, - diagnosticsDelay = 300, - formatterLineLength = 80, - forwardSearch = { - args = {} - }, - latexFormatter = "latexindent", - latexindent = { - modifyLineBreaks = false - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## tflint - -https://github.com/terraform-linters/tflint - -A pluggable Terraform linter that can act as lsp server. -Installation instructions can be found in https://github.com/terraform-linters/tflint#installation. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.tflint.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "tflint", "--langserver" } - ``` - - `filetypes` : - ```lua - { "terraform" } - ``` - - `root_dir` : - ```lua - root_pattern(".terraform", ".git", ".tflint.hcl") - ``` - - -## theme_check - -https://github.com/Shopify/shopify-cli - -`theme-check-language-server` is bundled with `shopify-cli` or it can also be installed via - -https://github.com/Shopify/theme-check#installation - -**NOTE:** -If installed via Homebrew, `cmd` must be set to 'theme-check-liquid-server' - -```lua -require lspconfig.theme_check.setup { - cmd = { 'theme-check-liquid-server' } -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.theme_check.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "theme-check-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "liquid" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## tsserver - -https://github.com/theia-ide/typescript-language-server - -`typescript-language-server` depends on `typescript`. Both packages can be installed via `npm`: -```sh -npm install -g typescript typescript-language-server -``` - -To configure type language server, add a -[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or -[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your -project. - -Here's an example that disables type checking in JavaScript files. - -```json -{ - "compilerOptions": { - "module": "commonjs", - "target": "es6", - "checkJs": false - }, - "exclude": [ - "node_modules" - ] -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.tsserver.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "typescript-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } - ``` - - `init_options` : - ```lua - { - hostInfo = "neovim" - } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git") - ``` - - -## typeprof - -https://github.com/ruby/typeprof - -`typeprof` is the built-in analysis and LSP tool for Ruby 3.1+. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.typeprof.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "typeprof", "--lsp", "--stdio" } - ``` - - `filetypes` : - ```lua - { "ruby", "eruby" } - ``` - - `root_dir` : - ```lua - root_pattern("Gemfile", ".git") - ``` - - -## vala_ls - -https://github.com/Prince781/vala-language-server - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vala_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vala-language-server" } - ``` - - `filetypes` : - ```lua - { "vala", "genie" } - ``` - - `root_dir` : - ```lua - root_pattern("meson.build", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## vdmj - -https://github.com/nickbattle/vdmj - -The VDMJ language server can be installed by cloning the VDMJ repository and -running `mvn clean install`. - -Various options are provided to configure the language server (see below). In -particular: -- `annotation_paths` is a list of folders and/or jar file paths for annotations -that should be used with the language server; -- any value of `debugger_port` less than zero will disable the debugger; note -that if a non-zero value is used, only one instance of the server can be active -at a time. - -More settings for VDMJ can be changed in a file called `vdmj.properties` under -`root_dir/.vscode`. For a description of the available settings, see -[Section 7 of the VDMJ User Guide](https://raw.githubusercontent.com/nickbattle/vdmj/master/vdmj/documentation/UserGuide.pdf). - -Note: proof obligations and combinatorial testing are not currently supported -by neovim. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vdmj.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - Generated from the options given - ``` - - `filetypes` : - ```lua - { "vdmsl", "vdmpp", "vdmrt" } - ``` - - `options` : - ```lua - { - annotation_paths = {}, - debugger_port = -1, - high_precision = false, - java = "$JAVA_HOME/bin/java", - java_opts = { "-Xmx3000m", "-Xss1m" }, - logfile = "path.join(vim.fn.stdpath 'cache', 'vdm-lsp.log')", - mavenrepo = "$HOME/.m2/repository/com/fujitsu", - version = "The latest version installed in `mavenrepo`" - } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor(fname) or find_vscode_ancestor(fname) - ``` - - -## verible - -https://github.com/chipsalliance/verible - -A linter and formatter for verilog and SystemVerilog files. - -Release binaries can be downloaded from [here](https://github.com/chipsalliance/verible/releases) -and placed in a directory on PATH. - -See https://github.com/chipsalliance/verible/tree/master/verilog/tools/ls/README.md for options. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.verible.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "verible-verilog-ls" } - ``` - - `filetypes` : - ```lua - { "systemverilog", "verilog" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## vimls - -https://github.com/iamcco/vim-language-server - -You can install vim-language-server via npm: -```sh -npm install -g vim-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vimls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vim-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "vim" } - ``` - - `init_options` : - ```lua - { - diagnostic = { - enable = true - }, - indexes = { - count = 3, - gap = 100, - projectRootPatterns = { "runtime", "nvim", ".git", "autoload", "plugin" }, - runtimepath = true - }, - iskeyword = "@,48-57,_,192-255,-#", - runtimepath = "", - suggest = { - fromRuntimepath = true, - fromVimruntime = true - }, - vimruntime = "" - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## vls - -https://github.com/vlang/vls - -V language server. - -`v-language-server` can be installed by following the instructions [here](https://github.com/vlang/vls#installation). - -**By default, v-language-server doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped and compiled v-language-server. - -```lua --- set the path to the vls installation; -local vls_root_path = vim.fn.stdpath('cache')..'/lspconfig/vls' -local vls_binary = vls_root_path.."/cmd/vls/vls" - -require'lspconfig'.vls.setup { - cmd = {vls_binary}, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vls.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "vlang" } - ``` - - `root_dir` : - ```lua - root_pattern("v.mod", ".git") - ``` - - -## volar - -https://github.com/johnsoncodehk/volar/tree/master/packages/vue-language-server - -Volar language server for Vue - -Volar can be installed via npm: - -```sh -npm install -g @volar/vue-language-server -``` - -Volar by default supports Vue 3 projects. Vue 2 projects need [additional configuration](https://github.com/johnsoncodehk/volar/blob/master/extensions/vscode-vue-language-features/README.md?plain=1#L28-L63). - -**Take Over Mode** -Volar can serve as a language server for both Vue and TypeScript via [Take Over Mode](https://github.com/johnsoncodehk/volar/discussions/471). - -To enable Take Over Mode, override the default filetypes in `setup{}` as follows: - -```lua -require'lspconfig'.volar.setup{ - filetypes = {'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue', 'json'} -} -``` - -**Overriding the default TypeScript Server used by Volar** -The default config looks for TS in the local node_modules. The alternatives are: - -- use a global TypeScript Server installation - -```lua -require'lspconfig'.volar.setup{ - init_options = { - typescript = { - serverPath = '/path/to/.npm/lib/node_modules/typescript/lib/tsserverlib.js' - } - } -} -``` - -- use a global TypeScript Server installation if a local server is not found - -```lua -local util = require 'lspconfig.util' - -local function get_typescript_server_path(root_dir) - local project_root = util.find_node_modules_ancestor(root_dir) - - local local_tsserverlib = project_root ~= nil and util.path.join(project_root, 'node_modules', 'typescript', 'lib', 'tsserverlibrary.js') - local global_tsserverlib = '/home/[yourusernamehere]/.npm/lib/node_modules/typescript/lib/tsserverlibrary.js' - - if local_tsserverlib and util.path.exists(local_tsserverlib) then - return local_tsserverlib - else - return global_tsserverlib - end -end - -require'lspconfig'.volar.setup{ - on_new_config = function(new_config, new_root_dir) - new_config.init_options.typescript.serverPath = get_typescript_server_path(new_root_dir) - end, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.volar.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vue-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "vue" } - ``` - - `init_options` : - ```lua - { - documentFeatures = { - documentColor = false, - documentFormatting = { - defaultPrintWidth = 100 - }, - documentSymbol = true, - foldingRange = true, - linkedEditingRange = true, - selectionRange = true - }, - languageFeatures = { - callHierarchy = true, - codeAction = true, - codeLens = true, - completion = { - defaultAttrNameCase = "kebabCase", - defaultTagNameCase = "both" - }, - definition = true, - diagnostics = true, - documentHighlight = true, - documentLink = true, - hover = true, - implementation = true, - references = true, - rename = true, - renameFileRefactoring = true, - schemaRequestService = true, - semanticTokens = false, - signatureHelp = true, - typeDefinition = true - }, - typescript = { - serverPath = "" - } - } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## vuels - -https://github.com/vuejs/vetur/tree/master/server - -Vue language server(vls) -`vue-language-server` can be installed via `npm`: -```sh -npm install -g vls -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vuels.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vls" } - ``` - - `filetypes` : - ```lua - { "vue" } - ``` - - `init_options` : - ```lua - { - config = { - css = {}, - emmet = {}, - html = { - suggest = {} - }, - javascript = { - format = {} - }, - stylusSupremacy = {}, - typescript = { - format = {} - }, - vetur = { - completion = { - autoImport = false, - tagCasing = "kebab", - useScaffoldSnippets = false - }, - format = { - defaultFormatter = { - js = "none", - ts = "none" - }, - defaultFormatterOptions = {}, - scriptInitialIndent = false, - styleInitialIndent = false - }, - useWorkspaceDependencies = false, - validation = { - script = true, - style = true, - template = true - } - } - } - } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", "vue.config.js") - ``` - - -## yamlls - -https://github.com/redhat-developer/yaml-language-server - -`yaml-language-server` can be installed via `yarn`: -```sh -yarn global add yaml-language-server -``` - -To use a schema for validation, there are two options: - -1. Add a modeline to the file. A modeline is a comment of the form: - -``` -# yaml-language-server: $schema=<urlToTheSchema|relativeFilePath|absoluteFilePath}> -``` - -where the relative filepath is the path relative to the open yaml file, and the absolute filepath -is the filepath relative to the filesystem root ('/' on unix systems) - -2. Associated a schema url, relative , or absolute (to root of project, not to filesystem root) path to -the a glob pattern relative to the detected project root. Check `:LspInfo` to determine the resolved project -root. - -```lua -require('lspconfig').yamlls.setup { - ... -- other configuration for setup {} - settings = { - yaml = { - ... -- other settings. note this overrides the lspconfig defaults. - schemas = { - ["https://json.schemastore.org/github-workflow.json"] = "/.github/workflows/*" - ["../path/relative/to/file.yml"] = "/.github/workflows/*" - ["/path/from/root/of/project"] = "/.github/workflows/*" - }, - }, - } -} -``` - -Currently, kubernetes is special-cased in yammls, see the following upstream issues: -* [#211](https://github.com/redhat-developer/yaml-language-server/issues/211). -* [#307](https://github.com/redhat-developer/yaml-language-server/issues/307). - -To override a schema to use a specific k8s schema version (for example, to use 1.18): - -```lua -require('lspconfig').yamlls.setup { - ... -- other configuration for setup {} - settings = { - yaml = { - ... -- other settings. note this overrides the lspconfig defaults. - schemas = { - ["https://raw.githubusercontent.com/instrumenta/kubernetes-json-schema/master/v1.18.0-standalone-strict/all.json"] = "/*.k8s.yaml", - ... -- other schemas - }, - }, - } -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.yamlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "yaml-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "yaml", "yaml.docker-compose" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `settings` : - ```lua - { - redhat = { - telemetry = { - enabled = false - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## zeta_note - -https://github.com/artempyanykh/zeta-note - -Markdown LSP server for easy note-taking with cross-references and diagnostics. - -Binaries can be downloaded from https://github.com/artempyanykh/zeta-note/releases - -**By default, zeta-note doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your zeta-note binary. - -```lua -require'lspconfig'.zeta_note.setup{ - cmd = {'path/to/zeta-note'} -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.zeta_note.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - root_pattern(".zeta.toml") - ``` - - -## zk - -github.com/mickael-menu/zk - -A plain text note-taking assistant - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.zk.setup{} -``` -**Commands:** -- ZkIndex: Index -- ZkNew: ZkNew - -**Default values:** - - `cmd` : - ```lua - { "zk", "lsp" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - root_pattern(".zk") - ``` - - -## zls - -https://github.com/zigtools/zls - -Zig LSP implementation + Zig Language Server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.zls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "zls" } - ``` - - `filetypes` : - ```lua - { "zig", "zir" } - ``` - - `root_dir` : - ```lua - util.root_pattern("zls.json", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - - -vim:ft=markdown diff --git a/start/lspconfig-0.1.3/doc/server_configurations.txt b/start/lspconfig-0.1.3/doc/server_configurations.txt deleted file mode 100644 index 426c422..0000000 --- a/start/lspconfig-0.1.3/doc/server_configurations.txt +++ /dev/null @@ -1,6554 +0,0 @@ -# Configurations -<!-- *lspconfig-server-configurations* --> - -The following LSP configs are included. This documentation is autogenerated from the lua files. Follow a link to find documentation for -that config. This file is accessible in neovim via `:help lspconfig-server-configurations` - -- [als](#als) -- [angularls](#angularls) -- [ansiblels](#ansiblels) -- [arduino_language_server](#arduino_language_server) -- [asm_lsp](#asm_lsp) -- [awk_ls](#awk_ls) -- [bashls](#bashls) -- [beancount](#beancount) -- [bicep](#bicep) -- [bsl_ls](#bsl_ls) -- [ccls](#ccls) -- [clangd](#clangd) -- [clarity_lsp](#clarity_lsp) -- [clojure_lsp](#clojure_lsp) -- [cmake](#cmake) -- [codeqlls](#codeqlls) -- [crystalline](#crystalline) -- [csharp_ls](#csharp_ls) -- [cssls](#cssls) -- [cssmodules_ls](#cssmodules_ls) -- [cucumber_language_server](#cucumber_language_server) -- [dartls](#dartls) -- [denols](#denols) -- [dhall_lsp_server](#dhall_lsp_server) -- [diagnosticls](#diagnosticls) -- [dockerls](#dockerls) -- [dotls](#dotls) -- [efm](#efm) -- [elixirls](#elixirls) -- [elmls](#elmls) -- [ember](#ember) -- [emmet_ls](#emmet_ls) -- [erlangls](#erlangls) -- [esbonio](#esbonio) -- [eslint](#eslint) -- [flow](#flow) -- [flux_lsp](#flux_lsp) -- [foam_ls](#foam_ls) -- [fortls](#fortls) -- [fsautocomplete](#fsautocomplete) -- [fstar](#fstar) -- [gdscript](#gdscript) -- [ghcide](#ghcide) -- [golangci_lint_ls](#golangci_lint_ls) -- [gopls](#gopls) -- [gradle_ls](#gradle_ls) -- [grammarly](#grammarly) -- [graphql](#graphql) -- [groovyls](#groovyls) -- [haxe_language_server](#haxe_language_server) -- [hdl_checker](#hdl_checker) -- [hhvm](#hhvm) -- [hie](#hie) -- [hls](#hls) -- [hoon_ls](#hoon_ls) -- [html](#html) -- [idris2_lsp](#idris2_lsp) -- [intelephense](#intelephense) -- [java_language_server](#java_language_server) -- [jdtls](#jdtls) -- [jedi_language_server](#jedi_language_server) -- [jsonls](#jsonls) -- [jsonnet_ls](#jsonnet_ls) -- [julials](#julials) -- [kotlin_language_server](#kotlin_language_server) -- [lean3ls](#lean3ls) -- [leanls](#leanls) -- [lelwel_ls](#lelwel_ls) -- [lemminx](#lemminx) -- [ltex](#ltex) -- [metals](#metals) -- [mint](#mint) -- [mm0_ls](#mm0_ls) -- [nickel_ls](#nickel_ls) -- [nimls](#nimls) -- [ocamlls](#ocamlls) -- [ocamllsp](#ocamllsp) -- [ols](#ols) -- [omnisharp](#omnisharp) -- [opencl_ls](#opencl_ls) -- [openscad_ls](#openscad_ls) -- [pasls](#pasls) -- [perlls](#perlls) -- [perlnavigator](#perlnavigator) -- [perlpls](#perlpls) -- [phpactor](#phpactor) -- [please](#please) -- [powershell_es](#powershell_es) -- [prismals](#prismals) -- [prosemd_lsp](#prosemd_lsp) -- [psalm](#psalm) -- [puppet](#puppet) -- [purescriptls](#purescriptls) -- [pylsp](#pylsp) -- [pyre](#pyre) -- [pyright](#pyright) -- [quick_lint_js](#quick_lint_js) -- [r_language_server](#r_language_server) -- [racket_langserver](#racket_langserver) -- [reason_ls](#reason_ls) -- [remark_ls](#remark_ls) -- [rescriptls](#rescriptls) -- [rls](#rls) -- [rnix](#rnix) -- [robotframework_ls](#robotframework_ls) -- [rome](#rome) -- [rust_analyzer](#rust_analyzer) -- [salt_ls](#salt_ls) -- [scry](#scry) -- [serve_d](#serve_d) -- [sixtyfps](#sixtyfps) -- [slint_lsp](#slint_lsp) -- [solang](#solang) -- [solargraph](#solargraph) -- [solc](#solc) -- [solidity_ls](#solidity_ls) -- [sorbet](#sorbet) -- [sourcekit](#sourcekit) -- [sourcery](#sourcery) -- [spectral](#spectral) -- [sqlls](#sqlls) -- [sqls](#sqls) -- [stylelint_lsp](#stylelint_lsp) -- [sumneko_lua](#sumneko_lua) -- [svelte](#svelte) -- [svls](#svls) -- [tailwindcss](#tailwindcss) -- [taplo](#taplo) -- [teal_ls](#teal_ls) -- [terraform_lsp](#terraform_lsp) -- [terraformls](#terraformls) -- [texlab](#texlab) -- [tflint](#tflint) -- [theme_check](#theme_check) -- [tsserver](#tsserver) -- [typeprof](#typeprof) -- [vala_ls](#vala_ls) -- [vdmj](#vdmj) -- [verible](#verible) -- [vimls](#vimls) -- [vls](#vls) -- [volar](#volar) -- [vuels](#vuels) -- [yamlls](#yamlls) -- [zeta_note](#zeta_note) -- [zk](#zk) -- [zls](#zls) - -## als - -https://github.com/AdaCore/ada_language_server - -Installation instructions can be found [here](https://github.com/AdaCore/ada_language_server#Install). - -Can be configured by passing a "settings" object to `als.setup{}`: - -```lua -require('lspconfig').als.setup{ - settings = { - ada = { - projectFile = "project.gpr"; - scenarioVariables = { ... }; - } - } -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.als.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ada_language_server" } - ``` - - `filetypes` : - ```lua - { "ada" } - ``` - - `root_dir` : - ```lua - util.root_pattern("Makefile", ".git", "*.gpr", "*.adc") - ``` - - -## angularls - -https://github.com/angular/vscode-ng-language-service - -`angular-language-server` can be installed via npm `npm install -g @angular/language-server`. - -Note, that if you override the default `cmd`, you must also update `on_new_config` to set `new_config.cmd` during startup. - -```lua -local project_library_path = "/path/to/project/lib" -local cmd = {"ngserver", "--stdio", "--tsProbeLocations", project_library_path , "--ngProbeLocations", project_library_path} - -require'lspconfig'.angularls.setup{ - cmd = cmd, - on_new_config = function(new_config,new_root_dir) - new_config.cmd = cmd - end, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.angularls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ngserver", "--stdio", "--tsProbeLocations", "", "--ngProbeLocations", "" } - ``` - - `filetypes` : - ```lua - { "typescript", "html", "typescriptreact", "typescript.tsx" } - ``` - - `root_dir` : - ```lua - root_pattern("angular.json", ".git") - ``` - - -## ansiblels - -https://github.com/ansible/ansible-language-server - -Language server for the ansible configuration management tool. - -`ansible-language-server` can be installed via `npm`: - -```sh -npm install -g @ansible/ansible-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ansiblels.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ansible-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "yaml.ansible" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - ansible = { - ansible = { - path = "ansible" - }, - ansibleLint = { - enabled = true, - path = "ansible-lint" - }, - executionEnvironment = { - enabled = false - }, - python = { - interpreterPath = "python" - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## arduino_language_server - -https://github.com/arduino/arduino-language-server - -Language server for Arduino - -The `arduino-language-server` can be installed by running: - go get -u github.com/arduino/arduino-language-server - -The `arduino-cli` tools must also be installed. Follow these instructions for your distro: - https://arduino.github.io/arduino-cli/latest/installation/ - -After installing the `arduino-cli` tools, follow these instructions for generating -a configuration file: - https://arduino.github.io/arduino-cli/latest/getting-started/#create-a-configuration-file -and make sure you install any relevant platforms libraries: - https://arduino.github.io/arduino-cli/latest/getting-started/#install-the-core-for-your-board - -The language server also requires `clangd` be installed. It will look for `clangd` by default but -the binary path can be overridden if need be. - -After all dependencies are installed you'll need to override the lspconfig command for the -language server in your setup function with the necessary configurations: - -```lua -lspconfig.arduino_language_server.setup({ - cmd = { - -- Required - "arduino-language-server", - "-cli-config", "/path/to/arduino-cli.yaml", - -- Optional - "-cli", "/path/to/arduino-cli", - "-clangd", "/path/to/clangd" - } -}) -``` - -For further instruction about configuration options, run `arduino-language-server --help`. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.arduino_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "arduino-language-server" } - ``` - - `filetypes` : - ```lua - { "arduino" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## asm_lsp - -https://github.com/bergercookie/asm-lsp - -Language Server for GAS/GO Assembly - -`asm-lsp` can be installed via cargo: -cargo install asm-lsp - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.asm_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "asm-lsp" } - ``` - - `filetypes` : - ```lua - { "asm", "vmasm" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## awk_ls - -https://github.com/Beaglefoot/awk-language-server/ - -`awk-language-server` can be installed via `npm`: -```sh -npm install -g awk-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.awk_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "awk-language-server" } - ``` - - `filetypes` : - ```lua - { "awk" } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## bashls - -https://github.com/mads-hartmann/bash-language-server - -`bash-language-server` can be installed via `npm`: -```sh -npm i -g bash-language-server -``` - -Language server for bash, written using tree sitter in typescript. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.bashls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "bash-language-server", "start" } - ``` - - `cmd_env` : - ```lua - { - GLOB_PATTERN = "*@(.sh|.inc|.bash|.command)" - } - ``` - - `filetypes` : - ```lua - { "sh" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## beancount - -https://github.com/polarmutex/beancount-language-server#installation - -See https://github.com/polarmutex/beancount-language-server#configuration for configuration options - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.beancount.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "beancount-langserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "beancount" } - ``` - - `init_options` : - ```lua - { - journalFile = "", - pythonPath = "python3" - } - ``` - - `root_dir` : - ```lua - root_pattern("elm.json") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## bicep - -https://github.com/azure/bicep -Bicep language server - -Bicep language server can be installed by downloading and extracting a release of bicep-langserver.zip from [Bicep GitHub releases](https://github.com/Azure/bicep/releases). - -Bicep language server requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -Neovim does not have built-in support for the bicep filetype which is required for lspconfig to automatically launch the language server. - -Filetype detection can be added via an autocmd: -```lua -vim.cmd [[ autocmd BufNewFile,BufRead *.bicep set filetype=bicep ]] -``` - -**By default, bicep language server does not have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. - -```lua -local bicep_lsp_bin = "/path/to/bicep-langserver/Bicep.LangServer.dll" -require'lspconfig'.bicep.setup{ - cmd = { "dotnet", bicep_lsp_bin }; - ... -} -``` - -To download the latest release and place in /usr/local/bin/bicep-langserver: -```bash -(cd $(mktemp -d) \ - && curl -fLO https://github.com/Azure/bicep/releases/latest/download/bicep-langserver.zip \ - && rm -rf /usr/local/bin/bicep-langserver \ - && unzip -d /usr/local/bin/bicep-langserver bicep-langserver.zip) -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.bicep.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "bicep" } - ``` - - `init_options` : - ```lua - {} - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## bsl_ls - - https://github.com/1c-syntax/bsl-language-server - - Language Server Protocol implementation for 1C (BSL) - 1C:Enterprise 8 and OneScript languages. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.bsl_ls.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "bsl", "os" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - -## ccls - -https://github.com/MaskRay/ccls/wiki - -ccls relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified -as compile_commands.json or, for simpler projects, a .ccls. -For details on how to automatically generate one using CMake look [here](https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html). Alternatively, you can use [Bear](https://github.com/rizsotto/Bear). - -Customization options are passed to ccls at initialization time via init_options, a list of available options can be found [here](https://github.com/MaskRay/ccls/wiki/Customization#initialization-options). For example: - -```lua -local lspconfig = require'lspconfig' -lspconfig.ccls.setup { - init_options = { - compilationDatabaseDirectory = "build"; - index = { - threads = 0; - }; - clang = { - excludeArgs = { "-frounding-math"} ; - }; - } -} - -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ccls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ccls" } - ``` - - `filetypes` : - ```lua - { "c", "cpp", "objc", "objcpp" } - ``` - - `offset_encoding` : - ```lua - "utf-32" - ``` - - `root_dir` : - ```lua - root_pattern("compile_commands.json", ".ccls", ".git") - ``` - - `single_file_support` : - ```lua - false - ``` - - -## clangd - -https://clangd.llvm.org/installation.html - -**NOTE:** Clang >= 11 is recommended! See [this issue for more](https://github.com/neovim/nvim-lsp/issues/23). - -clangd relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified as compile_commands.json, see https://clangd.llvm.org/installation#compile_commandsjson - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.clangd.setup{} -``` -**Commands:** -- ClangdSwitchSourceHeader: Switch between source/header - -**Default values:** - - `capabilities` : - ```lua - default capabilities, with offsetEncoding utf-8 - ``` - - `cmd` : - ```lua - { "clangd" } - ``` - - `filetypes` : - ```lua - { "c", "cpp", "objc", "objcpp" } - ``` - - `root_dir` : - ```lua - root_pattern( - '.clangd', - '.clang-tidy', - '.clang-format', - 'compile_commands.json', - 'compile_flags.txt', - 'configure.ac', - '.git' - ) - - ``` - - `single_file_support` : - ```lua - true - ``` - - -## clarity_lsp - -`clarity-lsp` is a language server for the Clarity language. Clarity is a decidable smart contract language that optimizes for predictability and security. Smart contracts allow developers to encode essential business logic on a blockchain. - -To learn how to configure the clarity language server, see the [clarity-lsp documentation](https://github.com/hirosystems/clarity-lsp). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.clarity_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "clarity-lsp" } - ``` - - `filetypes` : - ```lua - { "clar", "clarity" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - -## clojure_lsp - -https://github.com/snoe/clojure-lsp - -Clojure Language Server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.clojure_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "clojure-lsp" } - ``` - - `filetypes` : - ```lua - { "clojure", "edn" } - ``` - - `root_dir` : - ```lua - root_pattern("project.clj", "deps.edn", "build.boot", "shadow-cljs.edn", ".git") - ``` - - -## cmake - -https://github.com/regen100/cmake-language-server - -CMake LSP Implementation - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cmake.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "cmake-language-server" } - ``` - - `filetypes` : - ```lua - { "cmake" } - ``` - - `init_options` : - ```lua - { - buildDirectory = "build" - } - ``` - - `root_dir` : - ```lua - root_pattern(".git", "compile_commands.json", "build") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## codeqlls - -Reference: -https://help.semmle.com/codeql/codeql-cli.html - -Binaries: -https://github.com/github/codeql-cli-binaries - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.codeqlls.setup{} -``` - - -**Default values:** - - `before_init` : - ```lua - see source file - ``` - - `cmd` : - ```lua - { "codeql", "execute", "language-server", "--check-errors", "ON_CHANGE", "-q" } - ``` - - `filetypes` : - ```lua - { "ql" } - ``` - - `log_level` : - ```lua - 2 - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - search_path = "list containing all search paths, eg: '~/codeql-home/codeql-repo'" - } - ``` - - -## crystalline - -https://github.com/elbywan/crystalline - -Crystal language server. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.crystalline.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "crystalline" } - ``` - - `filetypes` : - ```lua - { "crystal" } - ``` - - `root_dir` : - ```lua - root_pattern('shard.yml', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## csharp_ls - -https://github.com/razzmatazz/csharp-language-server - -Language Server for C#. - -csharp-ls requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -The preferred way to install csharp-ls is with `dotnet tool install --global csharp-ls`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.csharp_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "csharp-ls" } - ``` - - `filetypes` : - ```lua - { "cs" } - ``` - - `init_options` : - ```lua - { - AutomaticWorkspaceInit = true - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## cssls - - -https://github.com/hrsh7th/vscode-langservers-extracted - -`css-languageserver` can be installed via `npm`: - -```sh -npm i -g vscode-langservers-extracted -``` - -Neovim does not currently include built-in snippets. `vscode-css-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. - -```lua ---Enable (broadcasting) snippet capability for completion -local capabilities = vim.lsp.protocol.make_client_capabilities() -capabilities.textDocument.completion.completionItem.snippetSupport = true - -require'lspconfig'.cssls.setup { - capabilities = capabilities, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cssls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vscode-css-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "css", "scss", "less" } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", ".git") or bufdir - ``` - - `settings` : - ```lua - { - css = { - validate = true - }, - less = { - validate = true - }, - scss = { - validate = true - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## cssmodules_ls - -https://github.com/antonk52/cssmodules-language-server - -Language server for autocompletion and go-to-definition functionality for CSS modules. - -You can install cssmodules-language-server via npm: -```sh -npm install -g cssmodules-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cssmodules_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "cssmodules-language-server" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "typescript", "typescriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern("package.json") - ``` - - -## cucumber_language_server - -https://cucumber.io -https://github.com/cucumber/common -https://www.npmjs.com/package/@cucumber/language-server - -Language server for Cucumber. - -`cucumber-language-server` can be installed via `npm`: -```sh -npm install -g @cucumber/language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cucumber_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "cucumber-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "cucumber" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## dartls - -https://github.com/dart-lang/sdk/tree/master/pkg/analysis_server/tool/lsp_spec - -Language server for dart. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dartls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "dart", "./snapshots/analysis_server.dart.snapshot", "--lsp" } - ``` - - `filetypes` : - ```lua - { "dart" } - ``` - - `init_options` : - ```lua - { - closingLabels = true, - flutterOutline = true, - onlyAnalyzeProjectsWithOpenFiles = true, - outline = true, - suggestFromUnimportedLibraries = true - } - ``` - - `root_dir` : - ```lua - root_pattern("pubspec.yaml") - ``` - - `settings` : - ```lua - { - dart = { - completeFunctionCalls = true, - showTodos = true - } - } - ``` - - -## denols - -https://github.com/denoland/deno - -Deno's built-in language server - -To approrpiately highlight codefences returned from denols, you will need to augment vim.g.markdown_fenced languages - in your init.lua. Example: - -```lua -vim.g.markdown_fenced_languages = { - "ts=typescript" -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.denols.setup{} -``` -**Commands:** -- DenolsCache: Cache a module and all of its dependencies. - -**Default values:** - - `cmd` : - ```lua - { "deno", "lsp" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } - ``` - - `handlers` : - ```lua - { - ["textDocument/definition"] = <function 1>, - ["textDocument/references"] = <function 1> - } - ``` - - `init_options` : - ```lua - { - enable = true, - lint = false, - unstable = false - } - ``` - - `root_dir` : - ```lua - root_pattern("deno.json", "deno.jsonc", "tsconfig.json", ".git") - ``` - - -## dhall_lsp_server - -https://github.com/dhall-lang/dhall-haskell/tree/master/dhall-lsp-server - -language server for dhall - -`dhall-lsp-server` can be installed via cabal: -```sh -cabal install dhall-lsp-server -``` -prebuilt binaries can be found [here](https://github.com/dhall-lang/dhall-haskell/releases). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dhall_lsp_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "dhall-lsp-server" } - ``` - - `filetypes` : - ```lua - { "dhall" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## diagnosticls - -https://github.com/iamcco/diagnostic-languageserver - -Diagnostic language server integrate with linters. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.diagnosticls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "diagnostic-languageserver", "--stdio" } - ``` - - `filetypes` : - ```lua - Empty by default, override to add filetypes - ``` - - `root_dir` : - ```lua - Vim's starting directory - ``` - - `single_file_support` : - ```lua - true - ``` - - -## dockerls - -https://github.com/rcjsuen/dockerfile-language-server-nodejs - -`docker-langserver` can be installed via `npm`: -```sh -npm install -g dockerfile-language-server-nodejs -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dockerls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "docker-langserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "dockerfile" } - ``` - - `root_dir` : - ```lua - root_pattern("Dockerfile") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## dotls - -https://github.com/nikeee/dot-language-server - -`dot-language-server` can be installed via `npm`: -```sh -npm install -g dot-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dotls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "dot-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "dot" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## efm - -https://github.com/mattn/efm-langserver - -General purpose Language Server that can use specified error message format generated from specified command. - -Requires at minimum EFM version [v0.0.38](https://github.com/mattn/efm-langserver/releases/tag/v0.0.38) to support -launching the language server on single files. If on an older version of EFM, disable single file support: - -```lua -require('lspconfig')['efm'].setup{ - settings = ..., -- You must populate this according to the EFM readme - filetypes = ..., -- Populate this according to the note below - single_file_support = false, -- This is the important line for supporting older version of EFM -} -``` - -Note: In order for neovim's built-in language server client to send the appropriate `languageId` to EFM, **you must -specify `filetypes` in your call to `setup{}`**. Otherwise `lspconfig` will launch EFM on the `BufEnter` instead -of the `FileType` autocommand, and the `filetype` variable used to populate the `languageId` will not yet be set. - -```lua -require('lspconfig')['efm'].setup{ - settings = ..., -- You must populate this according to the EFM readme - filetypes = { 'python','cpp','lua' } -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.efm.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "efm-langserver" } - ``` - - `root_dir` : - ```lua - util.root_pattern(".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## elixirls - -https://github.com/elixir-lsp/elixir-ls - -`elixir-ls` can be installed by following the instructions [here](https://github.com/elixir-lsp/elixir-ls#building-and-running). - -```bash -curl -fLO https://github.com/elixir-lsp/elixir-ls/releases/latest/download/elixir-ls.zip -unzip elixir-ls.zip -d /path/to/elixir-ls -# Unix -chmod +x /path/to/elixir-ls/language_server.sh -``` - -**By default, elixir-ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped elixir-ls. - -```lua -require'lspconfig'.elixirls.setup{ - -- Unix - cmd = { "/path/to/elixir-ls/language_server.sh" }; - -- Windows - cmd = { "/path/to/elixir-ls/language_server.bat" }; - ... -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.elixirls.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "elixir", "eelixir" } - ``` - - `root_dir` : - ```lua - root_pattern("mix.exs", ".git") or vim.loop.os_homedir() - ``` - - -## elmls - -https://github.com/elm-tooling/elm-language-server#installation - -If you don't want to use Nvim to install it, then you can use: -```sh -npm install -g elm elm-test elm-format @elm-tooling/elm-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.elmls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "elm-language-server" } - ``` - - `filetypes` : - ```lua - { "elm" } - ``` - - `init_options` : - ```lua - { - elmAnalyseTrigger = "change" - } - ``` - - `root_dir` : - ```lua - root_pattern("elm.json") - ``` - - -## ember - -https://github.com/lifeart/ember-language-server - -`ember-language-server` can be installed via `npm`: - -```sh -npm install -g @lifeart/ember-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ember.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ember-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "handlebars", "typescript", "javascript" } - ``` - - `root_dir` : - ```lua - root_pattern("ember-cli-build.js", ".git") - ``` - - -## emmet_ls - -https://github.com/aca/emmet-ls - -Package can be installed via `npm`: -```sh -npm install -g emmet-ls -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.emmet_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "emmet-ls", "--stdio" } - ``` - - `filetypes` : - ```lua - { "html", "css" } - ``` - - `root_dir` : - ```lua - git root - ``` - - `single_file_support` : - ```lua - true - ``` - - -## erlangls - -https://erlang-ls.github.io - -Language Server for Erlang. - -Clone [erlang_ls](https://github.com/erlang-ls/erlang_ls) -Compile the project with `make` and copy resulting binaries somewhere in your $PATH eg. `cp _build/*/bin/* ~/local/bin` - -Installation instruction can be found [here](https://github.com/erlang-ls/erlang_ls). - -Installation requirements: - - [Erlang OTP 21+](https://github.com/erlang/otp) - - [rebar3 3.9.1+](https://github.com/erlang/rebar3) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.erlangls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "erlang_ls" } - ``` - - `filetypes` : - ```lua - { "erlang" } - ``` - - `root_dir` : - ```lua - root_pattern('rebar.config', 'erlang.mk', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## esbonio - -https://github.com/swyddfa/esbonio - -Esbonio is a language server for [Sphinx](https://www.sphinx-doc.org/en/master/) documentation projects. -The language server can be installed via pip - -``` -pip install esbonio -``` - -Since Sphinx is highly extensible you will get best results if you install the language server in the same -Python environment as the one used to build your documentation. To ensure that the correct Python environment -is picked up, you can either launch `nvim` with the correct environment activated. - -``` -source env/bin/activate -nvim -``` - -Or you can modify the default `cmd` to include the full path to the Python interpreter. - -```lua -require'lspconfig'.esbonio.setup { - cmd = { '/path/to/virtualenv/bin/python', '-m', 'esbonio' } -} -``` - -Esbonio supports a number of config values passed as `init_options` on startup, for example. - -```lua -require'lspconfig'.esbonio.setup { - init_options = { - server = { - logLevel = "debug" - }, - sphinx = { - confDir = "/path/to/docs", - srcDir = "${confDir}/../docs-src" - } -} -``` - -A full list and explanation of the available options can be found [here](https://swyddfa.github.io/esbonio/docs/lsp/editors/index.html) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.esbonio.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "python3", "-m", "esbonio" } - ``` - - `filetypes` : - ```lua - { "rst" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## eslint - -https://github.com/hrsh7th/vscode-langservers-extracted - -vscode-eslint-language-server: A linting engine for JavaScript / Typescript - -`vscode-eslint-language-server` can be installed via `npm`: -```sh -npm i -g vscode-langservers-extracted -``` - -vscode-eslint-language-server provides an EslintFixAll command that can be used to format document on save -```vim -autocmd BufWritePre *.tsx,*.ts,*.jsx,*.js EslintFixAll -``` - -See [vscode-eslint](https://github.com/microsoft/vscode-eslint/blob/55871979d7af184bf09af491b6ea35ebd56822cf/server/src/eslintServer.ts#L216-L229) for configuration options. - -Additional messages you can handle: eslint/noConfig -Messages already handled in lspconfig: eslint/openDoc, eslint/confirmESLintExecution, eslint/probeFailed, eslint/noLibrary - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.eslint.setup{} -``` -**Commands:** -- EslintFixAll: Fix all eslint problems for this buffer - -**Default values:** - - `cmd` : - ```lua - { "vscode-eslint-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx", "vue" } - ``` - - `handlers` : - ```lua - { - ["eslint/confirmESLintExecution"] = <function 1>, - ["eslint/noLibrary"] = <function 2>, - ["eslint/openDoc"] = <function 3>, - ["eslint/probeFailed"] = <function 4> - } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - codeAction = { - disableRuleComment = { - enable = true, - location = "separateLine" - }, - showDocumentation = { - enable = true - } - }, - codeActionOnSave = { - enable = false, - mode = "all" - }, - format = true, - nodePath = "", - onIgnoredFiles = "off", - packageManager = "npm", - quiet = false, - rulesCustomizations = {}, - run = "onType", - useESLintClass = false, - validate = "on", - workingDirectory = { - mode = "location" - } - } - ``` - - -## flow - -https://flow.org/ -https://github.com/facebook/flow - -See below for how to setup Flow itself. -https://flow.org/en/docs/install/ - -See below for lsp command options. - -```sh -npx flow lsp --help -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.flow.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "npx", "--no-install", "flow", "lsp" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx" } - ``` - - `root_dir` : - ```lua - root_pattern(".flowconfig") - ``` - - -## flux_lsp - -https://github.com/influxdata/flux-lsp -`flux-lsp` can be installed via `cargo`: -```sh -cargo install --git https://github.com/influxdata/flux-lsp -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.flux_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "flux-lsp" } - ``` - - `filetypes` : - ```lua - { "flux" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## foam_ls - -https://github.com/FoamScience/foam-language-server - -`foam-language-server` can be installed via `npm` -```sh -npm install -g foam-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.foam_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "foam-ls", "--stdio" } - ``` - - `filetypes` : - ```lua - { "foam", "OpenFOAM" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## fortls - -https://github.com/hansec/fortran-language-server - -Fortran Language Server for the Language Server Protocol - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.fortls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "fortls" } - ``` - - `filetypes` : - ```lua - { "fortran" } - ``` - - `root_dir` : - ```lua - root_pattern(".fortls") - ``` - - `settings` : - ```lua - { - nthreads = 1 - } - ``` - - -## fsautocomplete - -https://github.com/fsharp/FsAutoComplete - -Language Server for F# provided by FsAutoComplete (FSAC). - -FsAutoComplete requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -The preferred way to install FsAutoComplete is with `dotnet tool install --global fsautocomplete`. - -Instructions to compile from source are found on the main [repository](https://github.com/fsharp/FsAutoComplete). - -You may also need to configure the filetype as Vim defaults to Forth for `*.fs` files: - -`autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp` - -This is automatically done by plugins such as [PhilT/vim-fsharp](https://github.com/PhilT/vim-fsharp), [fsharp/vim-fsharp](https://github.com/fsharp/vim-fsharp), and [adelarsq/neofsharp.vim](https://github.com/adelarsq/neofsharp.vim). - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.fsautocomplete.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "fsautocomplete", "--background-service-enabled" } - ``` - - `filetypes` : - ```lua - { "fsharp" } - ``` - - `init_options` : - ```lua - { - AutomaticWorkspaceInit = true - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## fstar - -https://github.com/FStarLang/FStar - -LSP support is included in FStar. Make sure `fstar.exe` is in your PATH. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.fstar.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "fstar.exe", "--lsp" } - ``` - - `filetypes` : - ```lua - { "fstar" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## gdscript - -https://github.com/godotengine/godot - -Language server for GDScript, used by Godot Engine. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.gdscript.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "nc", "localhost", "6008" } - ``` - - `filetypes` : - ```lua - { "gd", "gdscript", "gdscript3" } - ``` - - `root_dir` : - ```lua - util.root_pattern("project.godot", ".git") - ``` - - -## ghcide - -https://github.com/digital-asset/ghcide - -A library for building Haskell IDE tooling. -"ghcide" isn't for end users now. Use "haskell-language-server" instead of "ghcide". - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ghcide.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ghcide", "--lsp" } - ``` - - `filetypes` : - ```lua - { "haskell", "lhaskell" } - ``` - - `root_dir` : - ```lua - root_pattern("stack.yaml", "hie-bios", "BUILD.bazel", "cabal.config", "package.yaml") - ``` - - -## golangci_lint_ls - -Combination of both lint server and client - -https://github.com/nametake/golangci-lint-langserver -https://github.com/golangci/golangci-lint - - -Installation of binaries needed is done via - -``` -go install github.com/nametake/golangci-lint-langserver@latest -go install github.com/golangci/golangci-lint/cmd/golangci-lint@v1.42.1 -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.golangci_lint_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "golangci-lint-langserver" } - ``` - - `filetypes` : - ```lua - { "go", "gomod" } - ``` - - `init_options` : - ```lua - { - command = { "golangci-lint", "run", "--out-format", "json" } - } - ``` - - `root_dir` : - ```lua - root_pattern('go.work') or root_pattern('go.mod', '.golangci.yaml', '.git') - ``` - - -## gopls - -https://github.com/golang/tools/tree/master/gopls - -Google's lsp server for golang. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.gopls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "gopls" } - ``` - - `filetypes` : - ```lua - { "go", "gomod", "gotmpl" } - ``` - - `root_dir` : - ```lua - root_pattern("go.mod", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## gradle_ls - -https://github.com/microsoft/vscode-gradle - -Microsoft's lsp server for gradle files - -If you're setting this up manually, build vscode-gradle using `./gradlew installDist` and point `cmd` to the `gradle-language-server` generated in the build directory - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.gradle_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "gradle-language-server" } - ``` - - `filetypes` : - ```lua - { "groovy" } - ``` - - `root_dir` : - ```lua - root_pattern("settings.gradle") - ``` - - -## grammarly - -https://github.com/emacs-grammarly/unofficial-grammarly-language-server - -`unofficial-grammarly-language-server` can be installed via `npm`: - -```sh -npm i -g @emacs-grammarly/unofficial-grammarly-language-server -``` - -WARNING: Since this language server uses Grammarly's API, any document you open with it running is shared with them. Please evaluate their [privacy policy](https://www.grammarly.com/privacy-policy) before using this. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.grammarly.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "unofficial-grammarly-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `handlers` : - ```lua - { - ["$/updateDocumentState"] = <function 1> - } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## graphql - -https://github.com/graphql/graphiql/tree/main/packages/graphql-language-service-cli - -`graphql-lsp` can be installed via `npm`: - -```sh -npm install -g graphql-language-service-cli -``` - -Note that you must also have [the graphql package](https://github.com/graphql/graphql-js) installed and create a [GraphQL config file](https://www.graphql-config.com/docs/user/user-introduction). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.graphql.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "graphql-lsp", "server", "-m", "stream" } - ``` - - `filetypes` : - ```lua - { "graphql", "typescriptreact", "javascriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern('.git', '.graphqlrc*', '.graphql.config.*') - ``` - - -## groovyls - -https://github.com/prominic/groovy-language-server.git - -Requirements: - - Linux/macOS (for now) - - Java 11+ - -`groovyls` can be installed by following the instructions [here](https://github.com/prominic/groovy-language-server.git#build). - -If you have installed groovy language server, you can set the `cmd` custom path as follow: - -```lua -require'lspconfig'.groovyls.setup{ - -- Unix - cmd = { "java", "-jar", "path/to/groovyls/groovy-language-server-all.jar" }, - ... -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.groovyls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "java", "-jar", "groovy-language-server-all.jar" } - ``` - - `filetypes` : - ```lua - { "groovy" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## haxe_language_server - -https://github.com/vshaxe/haxe-language-server - -The Haxe language server can be built by running the following commands from -the project's root directory: - - npm install - npx lix run vshaxe-build -t language-server - -This will create `bin/server.js`. Note that the server requires Haxe 3.4.0 or -higher. - -After building the language server, set the `cmd` setting in your setup -function: - -```lua -lspconfig.haxe_language_server.setup({ - cmd = {"node", "path/to/bin/server.js"}, -}) -``` - -By default, an HXML compiler arguments file named `build.hxml` is expected in -your project's root directory. If your file is named something different, -specify it using the `init_options.displayArguments` setting. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.haxe_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "haxe-language-server" } - ``` - - `filetypes` : - ```lua - { "haxe" } - ``` - - `init_options` : - ```lua - { - displayArguments = { "build.hxml" } - } - ``` - - `root_dir` : - ```lua - root_pattern("*.hxml") - ``` - - `settings` : - ```lua - { - haxe = { - executable = "haxe" - } - } - ``` - - -## hdl_checker - -https://github.com/suoto/hdl_checker -Language server for hdl-checker. -Install using: `pip install hdl-checker --upgrade` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hdl_checker.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hdl_checker", "--lsp" } - ``` - - `filetypes` : - ```lua - { "vhdl", "verilog", "systemverilog" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## hhvm - -Language server for programs written in Hack -https://hhvm.com/ -https://github.com/facebook/hhvm -See below for how to setup HHVM & typechecker: -https://docs.hhvm.com/hhvm/getting-started/getting-started - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hhvm.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hh_client", "lsp" } - ``` - - `filetypes` : - ```lua - { "php", "hack" } - ``` - - `root_dir` : - ```lua - root_pattern(".hhconfig") - ``` - - -## hie - -https://github.com/haskell/haskell-ide-engine - -the following init_options are supported (see https://github.com/haskell/haskell-ide-engine#configuration): -```lua -init_options = { - languageServerHaskell = { - hlintOn = bool; - maxNumberOfProblems = number; - diagnosticsDebounceDuration = number; - liquidOn = bool (default false); - completionSnippetsOn = bool (default true); - formatOnImportOn = bool (default true); - formattingProvider = string (default "brittany", alternate "floskell"); - } -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hie.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hie-wrapper", "--lsp" } - ``` - - `filetypes` : - ```lua - { "haskell" } - ``` - - `root_dir` : - ```lua - root_pattern("stack.yaml", "package.yaml", ".git") - ``` - - -## hls - -https://github.com/haskell/haskell-language-server - -Haskell Language Server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "haskell-language-server-wrapper", "--lsp" } - ``` - - `filetypes` : - ```lua - { "haskell", "lhaskell" } - ``` - - `lspinfo` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern("*.cabal", "stack.yaml", "cabal.project", "package.yaml", "hie.yaml") - ``` - - `settings` : - ```lua - { - haskell = { - formattingProvider = "ormolu" - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## hoon_ls - -https://github.com/urbit/hoon-language-server - -A language server for Hoon. - -The language server can be installed via `npm install -g @hoon-language-server` - -Start a fake ~zod with `urbit -F zod`. -Start the language server at the Urbit Dojo prompt with: `|start %language-server` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hoon_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hoon-language-server" } - ``` - - `filetypes` : - ```lua - { "hoon" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## html - -https://github.com/hrsh7th/vscode-langservers-extracted - -`vscode-html-language-server` can be installed via `npm`: -```sh -npm i -g vscode-langservers-extracted -``` - -Neovim does not currently include built-in snippets. `vscode-html-language-server` only provides completions when snippet support is enabled. -To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. - -The code-formatting feature of the lsp can be controlled with the `provideFormatter` option. - -```lua ---Enable (broadcasting) snippet capability for completion -local capabilities = vim.lsp.protocol.make_client_capabilities() -capabilities.textDocument.completion.completionItem.snippetSupport = true - -require'lspconfig'.html.setup { - capabilities = capabilities, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.html.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vscode-html-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "html" } - ``` - - `init_options` : - ```lua - { - configurationSection = { "html", "css", "javascript" }, - embeddedLanguages = { - css = true, - javascript = true - }, - provideFormatter = true - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - `single_file_support` : - ```lua - true - ``` - - -## idris2_lsp - -https://github.com/idris-community/idris2-lsp - -The Idris 2 language server. - -Plugins for the Idris 2 filetype include -[Idris2-Vim](https://github.com/edwinb/idris2-vim) (fewer features, stable) and -[Nvim-Idris2](https://github.com/ShinKage/nvim-idris2) (cutting-edge, -experimental). - -Idris2-Lsp requires a build of Idris 2 that includes the "Idris 2 API" package. -Package managers with known support for this build include the -[AUR](https://aur.archlinux.org/packages/idris2-api-git/) and -[Homebrew](https://formulae.brew.sh/formula/idris2#default). - -If your package manager does not support the Idris 2 API, you will need to build -Idris 2 from source. Refer to the -[the Idris 2 installation instructions](https://github.com/idris-lang/Idris2/blob/main/INSTALL.md) -for details. Steps 5 and 8 are listed as "optional" in that guide, but they are -necessary in order to make the Idris 2 API available. - -You need to install a version of Idris2-Lsp that is compatible with your -version of Idris 2. There should be a branch corresponding to every released -Idris 2 version after v0.4.0. Use the latest commit on that branch. For example, -if you have Idris v0.5.1, you should use the v0.5.1 branch of Idris2-Lsp. - -If your Idris 2 version is newer than the newest Idris2-Lsp branch, use the -latest commit on the `master` branch, and set a reminder to check the Idris2-Lsp -repo for the release of a compatible versioned branch. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.idris2_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "idris2-lsp" } - ``` - - `filetypes` : - ```lua - { "idris2" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## intelephense - -https://intelephense.com/ - -`intelephense` can be installed via `npm`: -```sh -npm install -g intelephense -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.intelephense.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "intelephense", "--stdio" } - ``` - - `filetypes` : - ```lua - { "php" } - ``` - - `root_dir` : - ```lua - root_pattern("composer.json", ".git") - ``` - - -## java_language_server - -https://github.com/georgewfraser/java-language-server - -Java language server - -Point `cmd` to `lang_server_linux.sh` or the equivalent script for macOS/Windows provided by java-language-server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.java_language_server.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "java" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## jdtls - -https://projects.eclipse.org/projects/eclipse.jdt.ls - -Language server for Java. - -IMPORTANT: If you want all the features jdtls has to offer, [nvim-jdtls](https://github.com/mfussenegger/nvim-jdtls) -is highly recommended. If all you need is diagnostics, completion, imports, gotos and formatting and some code actions -you can keep reading here. - -For manual installation you can download precompiled binaries from the -[official downloads site](http://download.eclipse.org/jdtls/snapshots/?d) - -Due to the nature of java, settings cannot be inferred. Please set the following -environmental variables to match your installation. If you need per-project configuration -[direnv](https://github.com/direnv/direnv) is highly recommended. - -```bash -# Mandatory: -# .bashrc -export JDTLS_HOME=/path/to/jdtls_root # Directory with the plugin and configs directories - -# Optional: -export JAVA_HOME=/path/to/java_home # In case you don't have java in path or want to use a version in particular -export WORKSPACE=/path/to/workspace # Defaults to $HOME/workspace -``` -```lua - -- init.lua - require'lspconfig'.jdtls.setup{} -``` - -For automatic installation you can use the following unofficial installers/launchers under your own risk: - - [jdtls-launcher](https://github.com/eruizc-dev/jdtls-launcher) (Includes lombok support by default) - ```lua - -- init.lua - require'lspconfig'.jdtls.setup{ cmd = { 'jdtls' } } - ``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jdtls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "/usr/lib/jvm/temurin-11-jdk-amd64/bin/java", "-Declipse.application=org.eclipse.jdt.ls.core.id1", "-Dosgi.bundles.defaultStartLevel=4", "-Declipse.product=org.eclipse.jdt.ls.core.product", "-Dlog.protocol=true", "-Dlog.level=ALL", "-Xms1g", "-Xmx2G", "--add-modules=ALL-SYSTEM", "--add-opens", "java.base/java.util=ALL-UNNAMED", "--add-opens", "java.base/java.lang=ALL-UNNAMED", "-jar", "/plugins/org.eclipse.equinox.launcher_*.jar", "-configuration", "config_linux", "-data", "/home/runner/workspace" } - ``` - - `filetypes` : - ```lua - { "java" } - ``` - - `handlers` : - ```lua - { - ["language/status"] = <function 1>, - ["textDocument/codeAction"] = <function 2>, - ["textDocument/rename"] = <function 3>, - ["workspace/applyEdit"] = <function 4> - } - ``` - - `init_options` : - ```lua - { - jvm_args = {}, - workspace = "/home/runner/workspace" - } - ``` - - `root_dir` : - ```lua - { - -- Single-module projects - { - 'build.xml', -- Ant - 'pom.xml', -- Maven - 'settings.gradle', -- Gradle - 'settings.gradle.kts', -- Gradle - }, - -- Multi-module projects - { 'build.gradle', 'build.gradle.kts' }, - } or vim.fn.getcwd() - ``` - - `single_file_support` : - ```lua - true - ``` - - -## jedi_language_server - -https://github.com/pappasam/jedi-language-server - -`jedi-language-server`, a language server for Python, built on top of jedi - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jedi_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "jedi-language-server" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - vim's starting directory - ``` - - `single_file_support` : - ```lua - true - ``` - - -## jsonls - -https://github.com/hrsh7th/vscode-langservers-extracted - -vscode-json-language-server, a language server for JSON and JSON schema - -`vscode-json-language-server` can be installed via `npm`: -```sh -npm i -g vscode-langservers-extracted -``` - -Neovim does not currently include built-in snippets. `vscode-json-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. - -```lua ---Enable (broadcasting) snippet capability for completion -local capabilities = vim.lsp.protocol.make_client_capabilities() -capabilities.textDocument.completion.completionItem.snippetSupport = true - -require'lspconfig'.jsonls.setup { - capabilities = capabilities, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jsonls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vscode-json-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "json", "jsonc" } - ``` - - `init_options` : - ```lua - { - provideFormatter = true - } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## jsonnet_ls - -https://github.com/grafana/jsonnet-language-server - -A Language Server Protocol (LSP) server for Jsonnet. - -The language server can be installed with `go`: -```sh -go install github.com/grafana/jsonnet-language-server@latest -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jsonnet_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "jsonnet-language-server" } - ``` - - `filetypes` : - ```lua - { "jsonnet", "libsonnet" } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern("jsonnetfile.json") - ``` - - -## julials - -https://github.com/julia-vscode/julia-vscode - -LanguageServer.jl can be installed with `julia` and `Pkg`: -```sh -julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.add("LanguageServer")' -``` -where `~/.julia/environments/nvim-lspconfig` is the location where -the default configuration expects LanguageServer.jl to be installed. - -To update an existing install, use the following command: -```sh -julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.update()' -``` - -Note: In order to have LanguageServer.jl pick up installed packages or dependencies in a -Julia project, you must make sure that the project is instantiated: -```sh -julia --project=/path/to/my/project -e 'using Pkg; Pkg.instantiate()' -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.julials.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "julia", "--startup-file=no", "--history-file=no", "-e", ' # Load LanguageServer.jl: attempt to load from ~/.julia/environments/nvim-lspconfig\n # with the regular load path as a fallback\n ls_install_path = joinpath(\n get(DEPOT_PATH, 1, joinpath(homedir(), ".julia")),\n "environments", "nvim-lspconfig"\n )\n pushfirst!(LOAD_PATH, ls_install_path)\n using LanguageServer\n popfirst!(LOAD_PATH)\n depot_path = get(ENV, "JULIA_DEPOT_PATH", "")\n project_path = let\n dirname(something(\n ## 1. Finds an explicitly set project (JULIA_PROJECT)\n Base.load_path_expand((\n p = get(ENV, "JULIA_PROJECT", nothing);\n p === nothing ? nothing : isempty(p) ? nothing : p\n )),\n ## 2. Look for a Project.toml file in the current working directory,\n ## or parent directories, with $HOME as an upper boundary\n Base.current_project(),\n ## 3. First entry in the load path\n get(Base.load_path(), 1, nothing),\n ## 4. Fallback to default global environment,\n ## this is more or less unreachable\n Base.load_path_expand("@v#.#"),\n ))\n end\n @info "Running language server" VERSION pwd() project_path depot_path\n server = LanguageServer.LanguageServerInstance(stdin, stdout, project_path, depot_path)\n server.runlinter = true\n run(server)\n ' } - ``` - - `filetypes` : - ```lua - { "julia" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## kotlin_language_server - - A kotlin language server which was developed for internal usage and - released afterwards. Maintaining is not done by the original author, - but by fwcd. - - It is built via gradle and developed on github. - Source and additional description: - https://github.com/fwcd/kotlin-language-server - - This server requires vim to be aware of the kotlin-filetype. - You could refer for this capability to: - https://github.com/udalov/kotlin-vim (recommended) - Note that there is no LICENSE specified yet. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.kotlin_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "kotlin-language-server" } - ``` - - `filetypes` : - ```lua - { "kotlin" } - ``` - - `root_dir` : - ```lua - root_pattern("settings.gradle") - ``` - - -## lean3ls - -https://github.com/leanprover/lean-client-js/tree/master/lean-language-server - -Lean installation instructions can be found -[here](https://leanprover-community.github.io/get_started.html#regular-install). - -Once Lean is installed, you can install the Lean 3 language server by running -```sh -npm install -g lean-language-server -``` - -Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim), -that plugin fully handles the setup of the Lean language server, -and you shouldn't set up `lean3ls` both with it and `lspconfig`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.lean3ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lean-language-server", "--stdio", "--", "-M", "4096", "-T", "100000" } - ``` - - `filetypes` : - ```lua - { "lean3" } - ``` - - `offset_encoding` : - ```lua - "utf-32" - ``` - - `root_dir` : - ```lua - root_pattern("leanpkg.toml") or root_pattern(".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## leanls - -https://github.com/leanprover/lean4 - -Lean installation instructions can be found -[here](https://leanprover-community.github.io/get_started.html#regular-install). - -The Lean 4 language server is built-in with a Lean 4 install -(and can be manually run with, e.g., `lean --server`). - -Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim), -that plugin fully handles the setup of the Lean language server, -and you shouldn't set up `leanls` both with it and `lspconfig`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.leanls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lake", "serve", "--" } - ``` - - `filetypes` : - ```lua - { "lean" } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `options` : - ```lua - { - no_lake_lsp_cmd = { "lean", "--server" } - } - ``` - - `root_dir` : - ```lua - root_pattern("lakefile.lean", "lean-toolchain", "leanpkg.toml", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## lelwel_ls - -https://github.com/0x2a-42/lelwel - -Language server for lelwel grammars. - -You can install `lelwel-ls` via cargo: -```sh -cargo install --features="lsp" lelwel -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.lelwel_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lelwel-ls" } - ``` - - `filetypes` : - ```lua - { "llw" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## lemminx - -https://github.com/eclipse/lemminx - -The easiest way to install the server is to get a binary at https://download.jboss.org/jbosstools/vscode/stable/lemminx-binary/ and place it in your PATH. - -NOTE to macOS users: Binaries from unidentified developers are blocked by default. If you trust the downloaded binary from jboss.org, run it once, cancel the prompt, then remove the binary from Gatekeeper quarantine with `xattr -d com.apple.quarantine lemminx`. It should now run without being blocked. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.lemminx.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lemminx" } - ``` - - `filetypes` : - ```lua - { "xml", "xsd", "xsl", "xslt", "svg" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## ltex - -https://github.com/valentjn/ltex-ls - -LTeX Language Server: LSP language server for LanguageTool 🔍✔️ with support for LaTeX 🎓, Markdown 📝, and others - -To install, download the latest [release](https://github.com/valentjn/ltex-ls/releases) and ensure `ltex-ls` is on your path. - -To support org files or R sweave, users can define a custom filetype autocommand (or use a plugin which defines these filetypes): - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.org set filetype=org ]] -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ltex.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ltex-ls" } - ``` - - `filetypes` : - ```lua - { "bib", "gitcommit", "markdown", "org", "plaintex", "rst", "rnoweb", "tex" } - ``` - - `get_language_id` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## metals - -https://scalameta.org/metals/ - -Scala language server with rich IDE features. - -See full instructions in the Metals documentation: - -https://scalameta.org/metals/docs/editors/vim.html#using-an-alternative-lsp-client - -Note: that if you're using [nvim-metals](https://github.com/scalameta/nvim-metals), that plugin fully handles the setup and installation of Metals, and you shouldn't set up Metals both with it and `lspconfig`. - -To install Metals, make sure to have [coursier](https://get-coursier.io/docs/cli-installation) installed, and once you do you can install the latest Metals with `cs install metals`. You can also manually bootstrap Metals with the following command. - -```bash -cs bootstrap \ - --java-opt -Xss4m \ - --java-opt -Xms100m \ - org.scalameta:metals_2.12:<enter-version-here> \ - -r bintray:scalacenter/releases \ - -r sonatype:snapshots \ - -o /usr/local/bin/metals -f -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.metals.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "metals" } - ``` - - `filetypes` : - ```lua - { "scala" } - ``` - - `init_options` : - ```lua - { - compilerOptions = { - snippetAutoIndent = false - }, - isHttpEnabled = true, - statusBarProvider = "show-message" - } - ``` - - `message_level` : - ```lua - 4 - ``` - - `root_dir` : - ```lua - util.root_pattern("build.sbt", "build.sc", "build.gradle", "pom.xml") - ``` - - -## mint - -https://www.mint-lang.com - -Install Mint using the [instructions](https://www.mint-lang.com/install). -The language server is included since version 0.12.0. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.mint.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "mint", "ls" } - ``` - - `filetypes` : - ```lua - { "mint" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## mm0_ls - -https://github.com/digama0/mm0 - -Language Server for the metamath-zero theorem prover. - -Requires [mm0-rs](https://github.com/digama0/mm0/tree/master/mm0-rs) to be installed -and available on the `PATH`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.mm0_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "mm0-rs", "server" } - ``` - - `filetypes` : - ```lua - { "metamath-zero" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## nickel_ls - -Nickel Language Server - -https://github.com/tweag/nickel - -`nls` can be installed with nix, or cargo, from the Nickel repository. -```sh -git clone https://github.com/tweag/nickel.git -``` - -Nix: -```sh -cd nickel -nix-env -f . -i -``` - -cargo: -```sh -cd nickel/lsp/nls -cargo install --path . -``` - -In order to have lspconfig detect Nickel filetypes (a prequisite for autostarting a server), -install the [Nickel vim plugin](https://github.com/nickel-lang/vim-nickel). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.nickel_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "nls" } - ``` - - `filetypes` : - ```lua - { "ncl", "nickel" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## nimls - -https://github.com/PMunch/nimlsp -`nimlsp` can be installed via the `nimble` package manager: -```sh -nimble install nimlsp -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.nimls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "nimlsp" } - ``` - - `filetypes` : - ```lua - { "nim" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## ocamlls - -https://github.com/ocaml-lsp/ocaml-language-server - -`ocaml-language-server` can be installed via `npm` -```sh -npm install -g ocaml-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ocamlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ocaml-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "ocaml", "reason" } - ``` - - `root_dir` : - ```lua - root_pattern("*.opam", "esy.json", "package.json") - ``` - - -## ocamllsp - -https://github.com/ocaml/ocaml-lsp - -`ocaml-lsp` can be installed as described in [installation guide](https://github.com/ocaml/ocaml-lsp#installation). - -To install the lsp server in a particular opam switch: -```sh -opam pin add ocaml-lsp-server https://github.com/ocaml/ocaml-lsp.git -opam install ocaml-lsp-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ocamllsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ocamllsp" } - ``` - - `filetypes` : - ```lua - { "ocaml", "ocaml.menhir", "ocaml.interface", "ocaml.ocamllex", "reason" } - ``` - - `get_language_id` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern("*.opam", "esy.json", "package.json", ".git") - ``` - - -## ols - - https://github.com/DanielGavin/ols - - `Odin Language Server`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ols.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ols" } - ``` - - `filetypes` : - ```lua - { "odin" } - ``` - - `root_dir` : - ```lua - util.root_pattern("ols.json", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## omnisharp - -https://github.com/omnisharp/omnisharp-roslyn -OmniSharp server based on Roslyn workspaces - -`omnisharp-roslyn` can be installed by downloading and extracting a release from [here](https://github.com/OmniSharp/omnisharp-roslyn/releases). -Omnisharp can also be built from source by following the instructions [here](https://github.com/omnisharp/omnisharp-roslyn#downloading-omnisharp). - -Omnisharp requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -**By default, omnisharp-roslyn doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. - -```lua -local pid = vim.fn.getpid() --- On linux/darwin if using a release build, otherwise under scripts/OmniSharp(.Core)(.cmd) -local omnisharp_bin = "/path/to/omnisharp-repo/run" --- on Windows --- local omnisharp_bin = "/path/to/omnisharp/OmniSharp.exe" -require'lspconfig'.omnisharp.setup{ - cmd = { omnisharp_bin, "--languageserver" , "--hostPID", tostring(pid) }; - ... -} -``` - -Note, if you download the executable for darwin you will need to strip the quarantine label to run: -```bash -find /path/to/omnisharp-osx | xargs xattr -r -d com.apple.quarantine -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.omnisharp.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "cs", "vb" } - ``` - - `init_options` : - ```lua - {} - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern(".sln") or root_pattern(".csproj") - ``` - - -## opencl_ls - -https://github.com/Galarius/opencl-language-server - -Build instructions can be found [here](https://github.com/Galarius/opencl-language-server/blob/main/_dev/build.md). - -Prebuilt binaries are available for Linux, macOS and Windows [here](https://github.com/Galarius/opencl-language-server/releases). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.opencl_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "opencl-language-server" } - ``` - - `filetypes` : - ```lua - { "opencl" } - ``` - - `root_dir` : - ```lua - util.root_pattern(".git") - ``` - - -## openscad_ls - -https://github.com/dzhu/openscad-language-server - -A Language Server Protocol server for OpenSCAD - -You can build and install `openscad-language-server` binary with `cargo`: -```sh -cargo install openscad-language-server -``` - -Vim does not have built-in syntax for the `openscad` filetype currently. - -This can be added via an autocmd: - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.scad set filetype=openscad ]] -``` - -or by installing a filetype plugin such as https://github.com/sirtaj/vim-openscad - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.openscad_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "openscad-language-server" } - ``` - - `filetypes` : - ```lua - { "openscad" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## pasls - -https://github.com/genericptr/pascal-language-server - -An LSP server implementation for Pascal variants that are supported by Free Pascal, including Object Pascal. It uses CodeTools from Lazarus as backend. - -First set `cmd` to the Pascal lsp binary. - -Customization options are passed to pasls as environment variables for example in your `.bashrc`: -```bash -export FPCDIR='/usr/lib/fpc/src' # FPC source directory (This is the only required option for the server to work). -export PP='/usr/lib/fpc/3.2.2/ppcx64' # Path to the Free Pascal compiler executable. -export LAZARUSDIR='/usr/lib/lazarus' # Path to the Lazarus sources. -export FPCTARGET='' # Target operating system for cross compiling. -export FPCTARGETCPU='x86_64' # Target CPU for cross compiling. -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pasls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pasls" } - ``` - - `filetypes` : - ```lua - { "pascal" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## perlls - -https://github.com/richterger/Perl-LanguageServer/tree/master/clients/vscode/perl - -`Perl-LanguageServer`, a language server for Perl. - -To use the language server, ensure that you have Perl::LanguageServer installed and perl command is on your path. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.perlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "perl", "-MPerl::LanguageServer", "-e", "Perl::LanguageServer::run", "--", "--port 13603", "--nostdio 0", "--version 2.1.0" } - ``` - - `filetypes` : - ```lua - { "perl" } - ``` - - `root_dir` : - ```lua - vim's starting directory - ``` - - `settings` : - ```lua - { - perl = { - fileFilter = { ".pm", ".pl" }, - ignoreDirs = ".git", - perlCmd = "perl", - perlInc = " " - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## perlnavigator - -https://github.com/bscan/PerlNavigator - -A Perl language server - -**By default, perlnavigator doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -Clone the PerlNavigator repo, install based on the [instructions](https://github.com/bscan/PerlNavigator#installation-for-other-editors), -and point `cmd` to `server.js` inside the `server/out` directory: - -```lua -cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'} -``` - -At minimum, you will need `perl` in your path. If you want to use a non-standard `perl` you will need to set your configuration like so: -```lua -settings = { - perlnavigator = { - perlPath = '/some/odd/location/my-perl' - } -} -``` - -The `contributes.configuration.properties` section of `perlnavigator`'s `package.json` has all available configuration settings. All -settings have a reasonable default, but, at minimum, you may want to point `perlnavigator` at your `perltidy` and `perlcritic` configurations. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.perlnavigator.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - {} - ``` - - `filetypes` : - ```lua - { "perl" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## perlpls - -https://github.com/FractalBoy/perl-language-server -https://metacpan.org/pod/PLS - -`PLS`, another language server for Perl. - -To use the language server, ensure that you have PLS installed and that it is in your path - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.perlpls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pls" } - ``` - - `filetypes` : - ```lua - { "perl" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `settings` : - ```lua - { - perl = { - perlcritic = { - enabled = false - }, - syntax = { - enabled = true - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## phpactor - -https://github.com/phpactor/phpactor - -Installation: https://phpactor.readthedocs.io/en/master/usage/standalone.html#global-installation - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.phpactor.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "phpactor", "language-server" } - ``` - - `filetypes` : - ```lua - { "php" } - ``` - - `root_dir` : - ```lua - root_pattern("composer.json", ".git") - ``` - - -## please - -https://github.com/thought-machine/please - -High-performance extensible build system for reproducible multi-language builds. - -The `plz` binary will automatically install the LSP for you on first run - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.please.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "plz", "tool", "lps" } - ``` - - `filetypes` : - ```lua - { "bzl" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## powershell_es - -https://github.com/PowerShell/PowerShellEditorServices - -Language server for PowerShell. - -To install, download and extract PowerShellEditorServices.zip -from the [releases](https://github.com/PowerShell/PowerShellEditorServices/releases). -To configure the language server, set the property `bundle_path` to the root -of the extracted PowerShellEditorServices.zip. - -The default configuration doesn't set `cmd` unless `bundle_path` is specified. - -```lua -require'lspconfig'.powershell_es.setup{ - bundle_path = 'c:/w/PowerShellEditorServices', -} -``` - -By default the languageserver is started in `pwsh` (PowerShell Core). This can be changed by specifying `shell`. - -```lua -require'lspconfig'.powershell_es.setup{ - bundle_path = 'c:/w/PowerShellEditorServices', - shell = 'powershell.exe', -} -``` - -Note that the execution policy needs to be set to `Unrestricted` for the languageserver run under PowerShell - -If necessary, specific `cmd` can be defined instead of `bundle_path`. -See [PowerShellEditorServices](https://github.com/PowerShell/PowerShellEditorServices#stdio) -to learn more. - -```lua -require'lspconfig'.powershell_es.setup{ - cmd = {'pwsh', '-NoLogo', '-NoProfile', '-Command', "c:/PSES/Start-EditorServices.ps1 ..."} -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.powershell_es.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "ps1" } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - git root or current directory - ``` - - `shell` : - ```lua - "pwsh" - ``` - - `single_file_support` : - ```lua - true - ``` - - -## prismals - -Language Server for the Prisma JavaScript and TypeScript ORM - -`@prisma/language-server` can be installed via npm -```sh -npm install -g @prisma/language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.prismals.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "prisma-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "prisma" } - ``` - - `root_dir` : - ```lua - root_pattern(".git", "package.json") - ``` - - `settings` : - ```lua - { - prisma = { - prismaFmtBinPath = "" - } - } - ``` - - -## prosemd_lsp - -https://github.com/kitten/prosemd-lsp - -An experimental LSP for Markdown. - -Please see the manual installation instructions: https://github.com/kitten/prosemd-lsp#manual-installation - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.prosemd_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "prosemd-lsp", "--stdio" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - <function 1> - ``` - - `single_file_support` : - ```lua - true - ``` - - -## psalm - -https://github.com/vimeo/psalm - -Can be installed with composer. -```sh -composer global require vimeo/psalm -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.psalm.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "psalm-language-server" } - ``` - - `filetypes` : - ```lua - { "php" } - ``` - - `root_dir` : - ```lua - root_pattern("psalm.xml", "psalm.xml.dist") - ``` - - -## puppet - -LSP server for Puppet. - -Installation: - -- Clone the editor-services repository: - https://github.com/puppetlabs/puppet-editor-services - -- Navigate into that directory and run: `bundle install` - -- Install the 'puppet-lint' gem: `gem install puppet-lint` - -- Add that repository to $PATH. - -- Ensure you can run `puppet-languageserver` from outside the editor-services directory. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.puppet.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "puppet-languageserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "puppet" } - ``` - - `root_dir` : - ```lua - root_pattern("manifests", ".puppet-lint.rc", "hiera.yaml", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## purescriptls - -https://github.com/nwolverson/purescript-language-server -`purescript-language-server` can be installed via `npm` -```sh -npm install -g purescript-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.purescriptls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "purescript-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "purescript" } - ``` - - `root_dir` : - ```lua - root_pattern("spago.dhall, 'psc-package.json', bower.json") - ``` - - -## pylsp - -https://github.com/python-lsp/python-lsp-server - -A Python 3.6+ implementation of the Language Server Protocol. - -The language server can be installed via `pipx install 'python-lsp-server[all]'`. -Further instructions can be found in the [project's README](https://github.com/python-lsp/python-lsp-server). - -Note: This is a community fork of `pyls`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pylsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pylsp" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## pyre - -https://pyre-check.org/ - -`pyre` a static type checker for Python 3. - -`pyre` offers an extremely limited featureset. It currently only supports diagnostics, -which are triggered on save. - -Do not report issues for missing features in `pyre` to `lspconfig`. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pyre.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pyre", "persistent" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## pyright - -https://github.com/microsoft/pyright - -`pyright`, a static type checker and language server for python - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pyright.setup{} -``` -**Commands:** -- PyrightOrganizeImports: Organize Imports - -**Default values:** - - `cmd` : - ```lua - { "pyright-langserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - python = { - analysis = { - autoSearchPaths = true, - diagnosticMode = "workspace", - useLibraryCodeForTypes = true - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## quick_lint_js - -https://quick-lint-js.com/ - -quick-lint-js finds bugs in JavaScript programs. - -See installation [instructions](https://quick-lint-js.com/install/) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.quick_lint_js.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "quick-lint-js", "--lsp-server" } - ``` - - `filetypes` : - ```lua - { "javascript" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## r_language_server - -[languageserver](https://github.com/REditorSupport/languageserver) is an -implementation of the Microsoft's Language Server Protocol for the R -language. - -It is released on CRAN and can be easily installed by - -```R -install.packages("languageserver") -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.r_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "R", "--slave", "-e", "languageserver::run()" } - ``` - - `filetypes` : - ```lua - { "r", "rmd" } - ``` - - `log_level` : - ```lua - 2 - ``` - - `root_dir` : - ```lua - root_pattern(".git") or os_homedir - ``` - - -## racket_langserver - -[https://github.com/jeapostrophe/racket-langserver](https://github.com/jeapostrophe/racket-langserver) - -The Racket language server. This project seeks to use -[DrRacket](https://github.com/racket/drracket)'s public API to provide -functionality that mimics DrRacket's code tools as closely as possible. - -Install via `raco`: `raco pkg install racket-langserver` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.racket_langserver.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "racket", "--lib", "racket-langserver" } - ``` - - `filetypes` : - ```lua - { "racket", "scheme" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## reason_ls - -Reason language server - -**By default, reason_ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -You can install reason language server from [reason-language-server](https://github.com/jaredly/reason-language-server) repository. - -```lua -cmd = {'<path_to_reason_language_server>'} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.reason_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "reason-language-server" } - ``` - - `filetypes` : - ```lua - { "reason" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## remark_ls - -https://github.com/remarkjs/remark-language-server - -`remark-language-server` can be installed via `npm`: -```sh -npm install -g remark-language-server -``` - -`remark-language-server` uses the same -[configuration files](https://github.com/remarkjs/remark/tree/main/packages/remark-cli#example-config-files-json-yaml-js) -as `remark-cli`. - -This uses a plugin based system. Each plugin needs to be installed locally using `npm` or `yarn`. - -For example, given the following `.remarkrc.json`: - -```json -{ - "presets": [ - "remark-preset-lint-recommended" - ] -} -``` - -`remark-preset-lint-recommended` needs to be installed in the local project: - -```sh -npm install remark-preset-lint-recommended -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.remark_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "remark-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## rescriptls - -https://github.com/rescript-lang/rescript-vscode - -ReScript language server - -**By default, rescriptls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -You can use the bundled language server inside the [vim-rescript](https://github.com/rescript-lang/vim-rescript) repo. - -Clone the vim-rescript repo and point `cmd` to `server.js` inside `server/out` directory: - -```lua -cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'} - -``` - -If you have vim-rescript installed you can also use that installation. for example if you're using packer.nvim you can set cmd to something like this: - -```lua -cmd = { - 'node', - '/home/username/.local/share/nvim/site/pack/packer/start/vim-rescript/server/out/server.js', - '--stdio' -} -``` - -Another option is to use vscode extension [release](https://github.com/rescript-lang/rescript-vscode/releases). -Take a look at [here](https://github.com/rescript-lang/rescript-vscode#use-with-other-editors) for instructions. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rescriptls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - {} - ``` - - `filetypes` : - ```lua - { "rescript" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## rls - -https://github.com/rust-lang/rls - -rls, a language server for Rust - -See https://github.com/rust-lang/rls#setup to setup rls itself. -See https://github.com/rust-lang/rls#configuration for rls-specific settings. -All settings listed on the rls configuration section of the readme -must be set under settings.rust as follows: - -```lua -nvim_lsp.rls.setup { - settings = { - rust = { - unstable_features = true, - build_on_save = false, - all_features = true, - }, - }, -} -``` - -If you want to use rls for a particular build, eg nightly, set cmd as follows: - -```lua -cmd = {"rustup", "run", "nightly", "rls"} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "rls" } - ``` - - `filetypes` : - ```lua - { "rust" } - ``` - - `root_dir` : - ```lua - root_pattern("Cargo.toml") - ``` - - -## rnix - -https://github.com/nix-community/rnix-lsp - -A language server for Nix providing basic completion and formatting via nixpkgs-fmt. - -To install manually, run `cargo install rnix-lsp`. If you are using nix, rnix-lsp is in nixpkgs. - -This server accepts configuration via the `settings` key. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rnix.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "rnix-lsp" } - ``` - - `filetypes` : - ```lua - { "nix" } - ``` - - `init_options` : - ```lua - {} - ``` - - `root_dir` : - ```lua - vim's starting directory - ``` - - `settings` : - ```lua - {} - ``` - - -## robotframework_ls - -https://github.com/robocorp/robotframework-lsp - -Language Server Protocol implementation for Robot Framework. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.robotframework_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "robotframework_ls" } - ``` - - `filetypes` : - ```lua - { "robot" } - ``` - - `root_dir` : - ```lua - util.root_pattern('robotidy.toml', 'pyproject.toml')(fname) or util.find_git_ancestor(fname) - ``` - - -## rome - -https://rome.tools - -Language server for the Rome Frontend Toolchain. - -```sh -npm install [-g] rome -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rome.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "rome", "lsp" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "json", "typescript", "typescript.tsx", "typescriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern('package.json', 'node_modules', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## rust_analyzer - -https://github.com/rust-analyzer/rust-analyzer - -rust-analyzer (aka rls 2.0), a language server for Rust - -See [docs](https://github.com/rust-analyzer/rust-analyzer/tree/master/docs/user#settings) for extra settings. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rust_analyzer.setup{} -``` -**Commands:** -- CargoReload: Reload current cargo workspace - -**Default values:** - - `cmd` : - ```lua - { "rust-analyzer" } - ``` - - `filetypes` : - ```lua - { "rust" } - ``` - - `root_dir` : - ```lua - root_pattern("Cargo.toml", "rust-project.json") - ``` - - `settings` : - ```lua - { - ["rust-analyzer"] = {} - } - ``` - - -## salt_ls - -Language server for Salt configuration files. -https://github.com/dcermak/salt-lsp - -The language server can be installed with `pip`: -```sh -pip install salt-lsp -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.salt_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "salt_lsp_server" } - ``` - - `filetypes` : - ```lua - { "sls" } - ``` - - `root_dir` : - ```lua - root_pattern('.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## scry - -https://github.com/crystal-lang-tools/scry - -Crystal language server. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.scry.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "scry" } - ``` - - `filetypes` : - ```lua - { "crystal" } - ``` - - `root_dir` : - ```lua - root_pattern('shard.yml', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## serve_d - - https://github.com/Pure-D/serve-d - - `Microsoft language server protocol implementation for D using workspace-d.` - Download a binary from https://github.com/Pure-D/serve-d/releases and put it in your $PATH. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.serve_d.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "serve-d" } - ``` - - `filetypes` : - ```lua - { "d" } - ``` - - `root_dir` : - ```lua - util.root_pattern("dub.json", "dub.sdl", ".git") - ``` - - -## sixtyfps - -https://github.com/sixtyfpsui/sixtyfps -`SixtyFPS`'s language server - -You can build and install `sixtyfps-lsp` binary with `cargo`: -```sh -cargo install sixtyfps-lsp -``` - -Vim does not have built-in syntax for the `sixtyfps` filetype currently. - -This can be added via an autocmd: - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.60 set filetype=sixtyfps ]] -``` - -or by installing a filetype plugin such as https://github.com/RustemB/sixtyfps-vim - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sixtyfps.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sixtyfps-lsp" } - ``` - - `filetypes` : - ```lua - { "sixtyfps" } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## slint_lsp - -https://github.com/slint-ui/slint -`Slint`'s language server - -You can build and install `slint-lsp` binary with `cargo`: -```sh -cargo install slint-lsp -``` - -Vim does not have built-in syntax for the `slint` filetype at this time. - -This can be added via an autocmd: - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.slint set filetype=slint ]] -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.slint_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "slint-lsp" } - ``` - - `filetypes` : - ```lua - { "slint" } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## solang - -A language server for Solidity - -See the [documentation](https://solang.readthedocs.io/en/latest/installing.html) for installation instructions. - -The language server only provides the following capabilities: -* Syntax highlighting -* Diagnostics -* Hover - -There is currently no support for completion, goto definition, references, or other functionality. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solang.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solang", "--language-server", "--target", "ewasm" } - ``` - - `filetypes` : - ```lua - { "solidity" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## solargraph - -https://solargraph.org/ - -solargraph, a language server for Ruby - -You can install solargraph via gem install. - -```sh -gem install --user-install solargraph -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solargraph.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solargraph", "stdio" } - ``` - - `filetypes` : - ```lua - { "ruby" } - ``` - - `init_options` : - ```lua - { - formatting = true - } - ``` - - `root_dir` : - ```lua - root_pattern("Gemfile", ".git") - ``` - - `settings` : - ```lua - { - solargraph = { - diagnostics = true - } - } - ``` - - -## solc - -https://docs.soliditylang.org/en/latest/installing-solidity.html - -solc is the native language server for the Solidity language. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solc.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solc", "--lsp" } - ``` - - `filetypes` : - ```lua - { "solidity" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - -## solidity_ls - -npm install -g solidity-language-server - -solidity-language-server is a language server for the solidity language ported from the vscode solidity extension - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solidity_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solidity-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "solidity" } - ``` - - `root_dir` : - ```lua - root_pattern(".git", "package.json") - ``` - - -## sorbet - -https://sorbet.org - -Sorbet is a fast, powerful type checker designed for Ruby. - -You can install Sorbet via gem install. You might also be interested in how to set -Sorbet up for new projects: https://sorbet.org/docs/adopting. - -```sh -gem install sorbet -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sorbet.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "srb", "tc", "--lsp" } - ``` - - `filetypes` : - ```lua - { "ruby" } - ``` - - `root_dir` : - ```lua - root_pattern("Gemfile", ".git") - ``` - - -## sourcekit - -https://github.com/apple/sourcekit-lsp - -Language server for Swift and C/C++/Objective-C. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sourcekit.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sourcekit-lsp" } - ``` - - `filetypes` : - ```lua - { "swift", "c", "cpp", "objective-c", "objective-cpp" } - ``` - - `root_dir` : - ```lua - root_pattern("Package.swift", ".git") - ``` - - -## sourcery - -https://github.com/sourcery-ai/sourcery - -Refactor Python instantly using the power of AI. - -It requires the initializationOptions param to be populated as shown below and will respond with the list of ServerCapabilities that it supports. - -init_options = { - --- The Sourcery token for authenticating the user. - --- This is retrieved from the Sourcery website and must be - --- provided by each user. The extension must provide a - --- configuration option for the user to provide this value. - token = <YOUR_TOKEN> - - --- The extension's name and version as defined by the extension. - extension_version = 'vim.lsp' - - --- The editor's name and version as defined by the editor. - editor_version = 'vim' -} - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sourcery.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sourcery", "lsp" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `init_options` : - ```lua - { - editor_version = "vim", - extension_version = "vim.lsp" - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## spectral - -https://github.com/luizcorreia/spectral-language-server - `A flexible JSON/YAML linter for creating automated style guides, with baked in support for OpenAPI v2 & v3.` - -`spectral-language-server` can be installed via `npm`: -```sh -npm i -g spectral-language-server -``` -See [vscode-spectral](https://github.com/stoplightio/vscode-spectral#extension-settings) for configuration options. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.spectral.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "spectral-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "yaml", "json", "yml" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - enable = true, - run = "onType", - validateLanguages = { "yaml", "json", "yml" } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## sqlls - -https://github.com/joe-re/sql-language-server - -This LSP can be installed via `npm`. Find further instructions on manual installation of the sql-language-server at [joe-re/sql-language-server](https://github.com/joe-re/sql-language-server). -<br> - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sqlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sql-language-server", "up", "--method", "stdio" } - ``` - - `filetypes` : - ```lua - { "sql", "mysql" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## sqls - -https://github.com/lighttiger2505/sqls - -```lua -require'lspconfig'.sqls.setup{ - cmd = {"path/to/command", "-config", "path/to/config.yml"}; - ... -} -``` -Sqls can be installed via `go get github.com/lighttiger2505/sqls`. Instructions for compiling Sqls from the source can be found at [lighttiger2505/sqls](https://github.com/lighttiger2505/sqls). - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sqls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sqls" } - ``` - - `filetypes` : - ```lua - { "sql", "mysql" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - `single_file_support` : - ```lua - true - ``` - - -## stylelint_lsp - -https://github.com/bmatcuk/stylelint-lsp - -`stylelint-lsp` can be installed via `npm`: - -```sh -npm i -g stylelint-lsp -``` - -Can be configured by passing a `settings.stylelintplus` object to `stylelint_lsp.setup`: - -```lua -require'lspconfig'.stylelint_lsp.setup{ - settings = { - stylelintplus = { - -- see available options in stylelint-lsp documentation - } - } -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.stylelint_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "stylelint-lsp", "--stdio" } - ``` - - `filetypes` : - ```lua - { "css", "less", "scss", "sugarss", "vue", "wxss", "javascript", "javascriptreact", "typescript", "typescriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern('.stylelintrc', 'package.json') - ``` - - `settings` : - ```lua - {} - ``` - - -## sumneko_lua - -https://github.com/sumneko/lua-language-server - -Lua language server. - -`lua-language-server` can be installed by following the instructions [here](https://github.com/sumneko/lua-language-server/wiki/Build-and-Run). The default `cmd` assumes that the `lua-language-server` binary can be found in `$PATH`. - -```lua -local runtime_path = vim.split(package.path, ';') -table.insert(runtime_path, "lua/?.lua") -table.insert(runtime_path, "lua/?/init.lua") - -require'lspconfig'.sumneko_lua.setup { - settings = { - Lua = { - runtime = { - -- Tell the language server which version of Lua you're using (most likely LuaJIT in the case of Neovim) - version = 'LuaJIT', - -- Setup your lua path - path = runtime_path, - }, - diagnostics = { - -- Get the language server to recognize the `vim` global - globals = {'vim'}, - }, - workspace = { - -- Make the server aware of Neovim runtime files - library = vim.api.nvim_get_runtime_file("", true), - }, - -- Do not send telemetry data containing a randomized but unique identifier - telemetry = { - enable = false, - }, - }, - }, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sumneko_lua.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lua-language-server" } - ``` - - `filetypes` : - ```lua - { "lua" } - ``` - - `log_level` : - ```lua - 2 - ``` - - `root_dir` : - ```lua - root_pattern(".luarc.json", ".luacheckrc", ".stylua.toml", "selene.toml", ".git") - ``` - - `settings` : - ```lua - { - Lua = { - telemetry = { - enable = false - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## svelte - -https://github.com/sveltejs/language-tools/tree/master/packages/language-server - -`svelte-language-server` can be installed via `npm`: -```sh -npm install -g svelte-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.svelte.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "svelteserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "svelte" } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", ".git") - ``` - - -## svls - -https://github.com/dalance/svls - -Language server for verilog and SystemVerilog - -`svls` can be installed via `cargo`: - ```sh - cargo install svls - ``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.svls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "svls" } - ``` - - `filetypes` : - ```lua - { "verilog", "systemverilog" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## tailwindcss - -https://github.com/tailwindlabs/tailwindcss-intellisense - -Tailwind CSS Language Server can be installed via npm: -```sh -npm install -g @tailwindcss/language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.tailwindcss.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "tailwindcss-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "aspnetcorerazor", "astro", "astro-markdown", "blade", "django-html", "htmldjango", "edge", "eelixir", "ejs", "erb", "eruby", "gohtml", "haml", "handlebars", "hbs", "html", "html-eex", "heex", "jade", "leaf", "liquid", "markdown", "mdx", "mustache", "njk", "nunjucks", "php", "razor", "slim", "twig", "css", "less", "postcss", "sass", "scss", "stylus", "sugarss", "javascript", "javascriptreact", "reason", "rescript", "typescript", "typescriptreact", "vue", "svelte" } - ``` - - `init_options` : - ```lua - { - userLanguages = { - eelixir = "html-eex", - eruby = "erb" - } - } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern('tailwind.config.js', 'tailwind.config.ts', 'postcss.config.js', 'postcss.config.ts', 'package.json', 'node_modules', '.git') - ``` - - `settings` : - ```lua - { - tailwindCSS = { - classAttributes = { "class", "className", "classList", "ngClass" }, - lint = { - cssConflict = "warning", - invalidApply = "error", - invalidConfigPath = "error", - invalidScreen = "error", - invalidTailwindDirective = "error", - invalidVariant = "error", - recommendedVariantOrder = "warning" - }, - validate = true - } - } - ``` - - -## taplo - -https://taplo.tamasfe.dev/lsp/ - -Language server for Taplo, a TOML toolkit. - -`taplo-cli` can be installed via `cargo`: -```sh -cargo install --locked taplo-cli -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.taplo.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "taplo", "lsp", "stdio" } - ``` - - `filetypes` : - ```lua - { "toml" } - ``` - - `root_dir` : - ```lua - root_pattern("*.toml", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## teal_ls - -https://github.com/teal-language/teal-language-server - -Install with: -``` -luarocks install --dev teal-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.teal_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "teal-language-server" } - ``` - - `filetypes` : - ```lua - { "teal" } - ``` - - `root_dir` : - ```lua - root_pattern("tlconfig.lua", ".git") - ``` - - -## terraform_lsp - -https://github.com/juliosueiras/terraform-lsp - -Terraform language server -Download a released binary from -https://github.com/juliosueiras/terraform-lsp/releases. - -From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp: - -Both HashiCorp and the maintainer of terraform-lsp expressed interest in -collaborating on a language server and are working towards a _long-term_ -goal of a single stable and feature-complete implementation. - -For the time being both projects continue to exist, giving users the -choice: - -- `terraform-ls` providing - - overall stability (by relying only on public APIs) - - compatibility with any provider and any Terraform >=0.12.0 currently - less features - - due to project being younger and relying on public APIs which may - not offer the same functionality yet - -- `terraform-lsp` providing - - currently more features - - compatibility with a single particular Terraform (0.12.20 at time of writing) - - configs designed for other 0.12 versions may work, but interpretation may be inaccurate - - less stability (due to reliance on Terraform's own internal packages) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.terraform_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "terraform-lsp" } - ``` - - `filetypes` : - ```lua - { "terraform", "hcl" } - ``` - - `root_dir` : - ```lua - root_pattern(".terraform", ".git") - ``` - - -## terraformls - -https://github.com/hashicorp/terraform-ls - -Terraform language server -Download a released binary from https://github.com/hashicorp/terraform-ls/releases. - -From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp: - -Both HashiCorp and the maintainer of terraform-lsp expressed interest in -collaborating on a language server and are working towards a _long-term_ -goal of a single stable and feature-complete implementation. - -For the time being both projects continue to exist, giving users the -choice: - -- `terraform-ls` providing - - overall stability (by relying only on public APIs) - - compatibility with any provider and any Terraform >=0.12.0 currently - less features - - due to project being younger and relying on public APIs which may - not offer the same functionality yet - -- `terraform-lsp` providing - - currently more features - - compatibility with a single particular Terraform (0.12.20 at time of writing) - - configs designed for other 0.12 versions may work, but interpretation may be inaccurate - - less stability (due to reliance on Terraform's own internal packages) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.terraformls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "terraform-ls", "serve" } - ``` - - `filetypes` : - ```lua - { "terraform" } - ``` - - `root_dir` : - ```lua - root_pattern(".terraform", ".git") - ``` - - -## texlab - -https://github.com/latex-lsp/texlab - -A completion engine built from scratch for (La)TeX. - -See https://github.com/latex-lsp/texlab/blob/master/docs/options.md for configuration options. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.texlab.setup{} -``` -**Commands:** -- TexlabBuild: Build the current buffer -- TexlabForward: Forward search from current position - -**Default values:** - - `cmd` : - ```lua - { "texlab" } - ``` - - `filetypes` : - ```lua - { "tex", "bib" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - texlab = { - auxDirectory = ".", - bibtexFormatter = "texlab", - build = { - args = { "-pdf", "-interaction=nonstopmode", "-synctex=1", "%f" }, - executable = "latexmk", - forwardSearchAfter = false, - onSave = false - }, - chktex = { - onEdit = false, - onOpenAndSave = false - }, - diagnosticsDelay = 300, - formatterLineLength = 80, - forwardSearch = { - args = {} - }, - latexFormatter = "latexindent", - latexindent = { - modifyLineBreaks = false - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## tflint - -https://github.com/terraform-linters/tflint - -A pluggable Terraform linter that can act as lsp server. -Installation instructions can be found in https://github.com/terraform-linters/tflint#installation. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.tflint.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "tflint", "--langserver" } - ``` - - `filetypes` : - ```lua - { "terraform" } - ``` - - `root_dir` : - ```lua - root_pattern(".terraform", ".git", ".tflint.hcl") - ``` - - -## theme_check - -https://github.com/Shopify/shopify-cli - -`theme-check-language-server` is bundled with `shopify-cli` or it can also be installed via - -https://github.com/Shopify/theme-check#installation - -**NOTE:** -If installed via Homebrew, `cmd` must be set to 'theme-check-liquid-server' - -```lua -require lspconfig.theme_check.setup { - cmd = { 'theme-check-liquid-server' } -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.theme_check.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "theme-check-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "liquid" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## tsserver - -https://github.com/theia-ide/typescript-language-server - -`typescript-language-server` depends on `typescript`. Both packages can be installed via `npm`: -```sh -npm install -g typescript typescript-language-server -``` - -To configure type language server, add a -[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or -[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your -project. - -Here's an example that disables type checking in JavaScript files. - -```json -{ - "compilerOptions": { - "module": "commonjs", - "target": "es6", - "checkJs": false - }, - "exclude": [ - "node_modules" - ] -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.tsserver.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "typescript-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } - ``` - - `init_options` : - ```lua - { - hostInfo = "neovim" - } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git") - ``` - - -## typeprof - -https://github.com/ruby/typeprof - -`typeprof` is the built-in analysis and LSP tool for Ruby 3.1+. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.typeprof.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "typeprof", "--lsp", "--stdio" } - ``` - - `filetypes` : - ```lua - { "ruby", "eruby" } - ``` - - `root_dir` : - ```lua - root_pattern("Gemfile", ".git") - ``` - - -## vala_ls - -https://github.com/Prince781/vala-language-server - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vala_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vala-language-server" } - ``` - - `filetypes` : - ```lua - { "vala", "genie" } - ``` - - `root_dir` : - ```lua - root_pattern("meson.build", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## vdmj - -https://github.com/nickbattle/vdmj - -The VDMJ language server can be installed by cloning the VDMJ repository and -running `mvn clean install`. - -Various options are provided to configure the language server (see below). In -particular: -- `annotation_paths` is a list of folders and/or jar file paths for annotations -that should be used with the language server; -- any value of `debugger_port` less than zero will disable the debugger; note -that if a non-zero value is used, only one instance of the server can be active -at a time. - -More settings for VDMJ can be changed in a file called `vdmj.properties` under -`root_dir/.vscode`. For a description of the available settings, see -[Section 7 of the VDMJ User Guide](https://raw.githubusercontent.com/nickbattle/vdmj/master/vdmj/documentation/UserGuide.pdf). - -Note: proof obligations and combinatorial testing are not currently supported -by neovim. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vdmj.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - Generated from the options given - ``` - - `filetypes` : - ```lua - { "vdmsl", "vdmpp", "vdmrt" } - ``` - - `options` : - ```lua - { - annotation_paths = {}, - debugger_port = -1, - high_precision = false, - java = "$JAVA_HOME/bin/java", - java_opts = { "-Xmx3000m", "-Xss1m" }, - logfile = "path.join(vim.fn.stdpath 'cache', 'vdm-lsp.log')", - mavenrepo = "$HOME/.m2/repository/com/fujitsu", - version = "The latest version installed in `mavenrepo`" - } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor(fname) or find_vscode_ancestor(fname) - ``` - - -## verible - -https://github.com/chipsalliance/verible - -A linter and formatter for verilog and SystemVerilog files. - -Release binaries can be downloaded from [here](https://github.com/chipsalliance/verible/releases) -and placed in a directory on PATH. - -See https://github.com/chipsalliance/verible/tree/master/verilog/tools/ls/README.md for options. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.verible.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "verible-verilog-ls" } - ``` - - `filetypes` : - ```lua - { "systemverilog", "verilog" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## vimls - -https://github.com/iamcco/vim-language-server - -You can install vim-language-server via npm: -```sh -npm install -g vim-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vimls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vim-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "vim" } - ``` - - `init_options` : - ```lua - { - diagnostic = { - enable = true - }, - indexes = { - count = 3, - gap = 100, - projectRootPatterns = { "runtime", "nvim", ".git", "autoload", "plugin" }, - runtimepath = true - }, - iskeyword = "@,48-57,_,192-255,-#", - runtimepath = "", - suggest = { - fromRuntimepath = true, - fromVimruntime = true - }, - vimruntime = "" - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## vls - -https://github.com/vlang/vls - -V language server. - -`v-language-server` can be installed by following the instructions [here](https://github.com/vlang/vls#installation). - -**By default, v-language-server doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped and compiled v-language-server. - -```lua --- set the path to the vls installation; -local vls_root_path = vim.fn.stdpath('cache')..'/lspconfig/vls' -local vls_binary = vls_root_path.."/cmd/vls/vls" - -require'lspconfig'.vls.setup { - cmd = {vls_binary}, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vls.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "vlang" } - ``` - - `root_dir` : - ```lua - root_pattern("v.mod", ".git") - ``` - - -## volar - -https://github.com/johnsoncodehk/volar/tree/master/packages/vue-language-server - -Volar language server for Vue - -Volar can be installed via npm: - -```sh -npm install -g @volar/vue-language-server -``` - -Volar by default supports Vue 3 projects. Vue 2 projects need [additional configuration](https://github.com/johnsoncodehk/volar/blob/master/extensions/vscode-vue-language-features/README.md?plain=1#L28-L63). - -**Take Over Mode** -Volar can serve as a language server for both Vue and TypeScript via [Take Over Mode](https://github.com/johnsoncodehk/volar/discussions/471). - -To enable Take Over Mode, override the default filetypes in `setup{}` as follows: - -```lua -require'lspconfig'.volar.setup{ - filetypes = {'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue', 'json'} -} -``` - -**Overriding the default TypeScript Server used by Volar** -The default config looks for TS in the local node_modules. The alternatives are: - -- use a global TypeScript Server installation - -```lua -require'lspconfig'.volar.setup{ - init_options = { - typescript = { - serverPath = '/path/to/.npm/lib/node_modules/typescript/lib/tsserverlib.js' - } - } -} -``` - -- use a global TypeScript Server installation if a local server is not found - -```lua -local util = require 'lspconfig.util' - -local function get_typescript_server_path(root_dir) - local project_root = util.find_node_modules_ancestor(root_dir) - - local local_tsserverlib = project_root ~= nil and util.path.join(project_root, 'node_modules', 'typescript', 'lib', 'tsserverlibrary.js') - local global_tsserverlib = '/home/[yourusernamehere]/.npm/lib/node_modules/typescript/lib/tsserverlibrary.js' - - if local_tsserverlib and util.path.exists(local_tsserverlib) then - return local_tsserverlib - else - return global_tsserverlib - end -end - -require'lspconfig'.volar.setup{ - on_new_config = function(new_config, new_root_dir) - new_config.init_options.typescript.serverPath = get_typescript_server_path(new_root_dir) - end, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.volar.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vue-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "vue" } - ``` - - `init_options` : - ```lua - { - documentFeatures = { - documentColor = false, - documentFormatting = { - defaultPrintWidth = 100 - }, - documentSymbol = true, - foldingRange = true, - linkedEditingRange = true, - selectionRange = true - }, - languageFeatures = { - callHierarchy = true, - codeAction = true, - codeLens = true, - completion = { - defaultAttrNameCase = "kebabCase", - defaultTagNameCase = "both" - }, - definition = true, - diagnostics = true, - documentHighlight = true, - documentLink = true, - hover = true, - implementation = true, - references = true, - rename = true, - renameFileRefactoring = true, - schemaRequestService = true, - semanticTokens = false, - signatureHelp = true, - typeDefinition = true - }, - typescript = { - serverPath = "" - } - } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## vuels - -https://github.com/vuejs/vetur/tree/master/server - -Vue language server(vls) -`vue-language-server` can be installed via `npm`: -```sh -npm install -g vls -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vuels.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vls" } - ``` - - `filetypes` : - ```lua - { "vue" } - ``` - - `init_options` : - ```lua - { - config = { - css = {}, - emmet = {}, - html = { - suggest = {} - }, - javascript = { - format = {} - }, - stylusSupremacy = {}, - typescript = { - format = {} - }, - vetur = { - completion = { - autoImport = false, - tagCasing = "kebab", - useScaffoldSnippets = false - }, - format = { - defaultFormatter = { - js = "none", - ts = "none" - }, - defaultFormatterOptions = {}, - scriptInitialIndent = false, - styleInitialIndent = false - }, - useWorkspaceDependencies = false, - validation = { - script = true, - style = true, - template = true - } - } - } - } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", "vue.config.js") - ``` - - -## yamlls - -https://github.com/redhat-developer/yaml-language-server - -`yaml-language-server` can be installed via `yarn`: -```sh -yarn global add yaml-language-server -``` - -To use a schema for validation, there are two options: - -1. Add a modeline to the file. A modeline is a comment of the form: - -``` -# yaml-language-server: $schema=<urlToTheSchema|relativeFilePath|absoluteFilePath}> -``` - -where the relative filepath is the path relative to the open yaml file, and the absolute filepath -is the filepath relative to the filesystem root ('/' on unix systems) - -2. Associated a schema url, relative , or absolute (to root of project, not to filesystem root) path to -the a glob pattern relative to the detected project root. Check `:LspInfo` to determine the resolved project -root. - -```lua -require('lspconfig').yamlls.setup { - ... -- other configuration for setup {} - settings = { - yaml = { - ... -- other settings. note this overrides the lspconfig defaults. - schemas = { - ["https://json.schemastore.org/github-workflow.json"] = "/.github/workflows/*" - ["../path/relative/to/file.yml"] = "/.github/workflows/*" - ["/path/from/root/of/project"] = "/.github/workflows/*" - }, - }, - } -} -``` - -Currently, kubernetes is special-cased in yammls, see the following upstream issues: -* [#211](https://github.com/redhat-developer/yaml-language-server/issues/211). -* [#307](https://github.com/redhat-developer/yaml-language-server/issues/307). - -To override a schema to use a specific k8s schema version (for example, to use 1.18): - -```lua -require('lspconfig').yamlls.setup { - ... -- other configuration for setup {} - settings = { - yaml = { - ... -- other settings. note this overrides the lspconfig defaults. - schemas = { - ["https://raw.githubusercontent.com/instrumenta/kubernetes-json-schema/master/v1.18.0-standalone-strict/all.json"] = "/*.k8s.yaml", - ... -- other schemas - }, - }, - } -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.yamlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "yaml-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "yaml", "yaml.docker-compose" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `settings` : - ```lua - { - redhat = { - telemetry = { - enabled = false - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## zeta_note - -https://github.com/artempyanykh/zeta-note - -Markdown LSP server for easy note-taking with cross-references and diagnostics. - -Binaries can be downloaded from https://github.com/artempyanykh/zeta-note/releases - -**By default, zeta-note doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your zeta-note binary. - -```lua -require'lspconfig'.zeta_note.setup{ - cmd = {'path/to/zeta-note'} -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.zeta_note.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - root_pattern(".zeta.toml") - ``` - - -## zk - -github.com/mickael-menu/zk - -A plain text note-taking assistant - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.zk.setup{} -``` -**Commands:** -- ZkIndex: Index -- ZkNew: ZkNew - -**Default values:** - - `cmd` : - ```lua - { "zk", "lsp" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - root_pattern(".zk") - ``` - - -## zls - -https://github.com/zigtools/zls - -Zig LSP implementation + Zig Language Server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.zls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "zls" } - ``` - - `filetypes` : - ```lua - { "zig", "zir" } - ``` - - `root_dir` : - ```lua - util.root_pattern("zls.json", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - - -vim:ft=markdown diff --git a/start/lspconfig-0.1.3/lua/lspconfig.lua b/start/lspconfig-0.1.3/lua/lspconfig.lua deleted file mode 100644 index 8404632..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig.lua +++ /dev/null @@ -1,92 +0,0 @@ -local configs = require 'lspconfig.configs' - -local M = { - util = require 'lspconfig.util', -} - -M._root = {} - -function M.available_servers() - return vim.tbl_keys(configs) -end - --- Called from plugin/lspconfig.vim because it requires knowing that the last --- script in scriptnames to be executed is lspconfig. -function M._root._setup() - M._root.commands = { - LspInfo = { - function() - require 'lspconfig.ui.lspinfo'() - end, - '-nargs=0', - description = '`:LspInfo` Displays attached, active, and configured language servers', - }, - LspStart = { - function(server_name) - if server_name then - if configs[server_name] then - configs[server_name].launch() - end - else - local buffer_filetype = vim.bo.filetype - for _, config in pairs(configs) do - for _, filetype_match in ipairs(config.filetypes or {}) do - if buffer_filetype == filetype_match then - config.launch() - end - end - end - end - end, - '-nargs=? -complete=custom,v:lua.lsp_complete_configured_servers', - description = '`:LspStart` Manually launches a language server.', - }, - LspStop = { - function(cmd_args) - for _, client in ipairs(M.util.get_clients_from_cmd_args(cmd_args)) do - client.stop() - end - end, - '-nargs=? -complete=customlist,v:lua.lsp_get_active_client_ids', - description = '`:LspStop` Manually stops the given language client(s).', - }, - LspRestart = { - function(cmd_args) - for _, client in ipairs(M.util.get_clients_from_cmd_args(cmd_args)) do - client.stop() - vim.defer_fn(function() - configs[client.name].launch() - end, 500) - end - end, - '-nargs=? -complete=customlist,v:lua.lsp_get_active_client_ids', - description = '`:LspRestart` Manually restart the given language client(s).', - }, - } - - M.util.create_module_commands('_root', M._root.commands) -end - -local mt = {} -function mt:__index(k) - if configs[k] == nil then - local success, config = pcall(require, 'lspconfig.server_configurations.' .. k) - if success then - configs[k] = config - else - vim.notify( - string.format( - '[lspconfig] Cannot access configuration for %s. Ensure this server is listed in ' - .. '`server_configurations.md` or added as a custom server.', - k - ), - vim.log.levels.WARN - ) - -- Return a dummy function for compatibility with user configs - return { setup = function() end } - end - end - return configs[k] -end - -return setmetatable(M, mt) diff --git a/start/lspconfig-0.1.3/lua/lspconfig/configs.lua b/start/lspconfig-0.1.3/lua/lspconfig/configs.lua deleted file mode 100644 index a47ecba..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/configs.lua +++ /dev/null @@ -1,295 +0,0 @@ -local util = require 'lspconfig.util' -local api, validate, lsp = vim.api, vim.validate, vim.lsp -local tbl_extend = vim.tbl_extend - -local configs = {} - -function configs.__newindex(t, config_name, config_def) - validate { - name = { config_name, 's' }, - default_config = { config_def.default_config, 't' }, - on_new_config = { config_def.on_new_config, 'f', true }, - on_attach = { config_def.on_attach, 'f', true }, - commands = { config_def.commands, 't', true }, - } - if config_def.commands then - for k, v in pairs(config_def.commands) do - validate { - ['command.name'] = { k, 's' }, - ['command.fn'] = { v[1], 'f' }, - } - end - else - config_def.commands = {} - end - - local M = {} - - local default_config = tbl_extend('keep', config_def.default_config, util.default_config) - - -- Force this part. - default_config.name = config_name - - function M.setup(config) - validate { - cmd = { config.cmd, 't', true }, - root_dir = { config.root_dir, 'f', true }, - filetypes = { config.filetype, 't', true }, - on_new_config = { config.on_new_config, 'f', true }, - on_attach = { config.on_attach, 'f', true }, - commands = { config.commands, 't', true }, - } - if config.commands then - for k, v in pairs(config.commands) do - validate { - ['command.name'] = { k, 's' }, - ['command.fn'] = { v[1], 'f' }, - } - end - end - - config = tbl_extend('keep', config, default_config) - - if util.on_setup then - pcall(util.on_setup, config) - end - - if config.autostart == true then - local event - local pattern - if config.filetypes then - event = 'FileType' - pattern = table.concat(config.filetypes, ',') - else - event = 'BufReadPost' - pattern = '*' - end - api.nvim_command( - string.format( - "autocmd %s %s unsilent lua require'lspconfig'[%q].manager.try_add()", - event, - pattern, - config.name - ) - ) - end - - local get_root_dir = config.root_dir - - function M.launch() - local root_dir - if get_root_dir then - local bufnr = api.nvim_get_current_buf() - local bufname = api.nvim_buf_get_name(bufnr) - if not util.bufname_valid(bufname) then - return - end - root_dir = get_root_dir(util.path.sanitize(bufname), bufnr) - end - - if root_dir then - api.nvim_command( - string.format( - "autocmd BufReadPost %s/* unsilent lua require'lspconfig'[%q].manager.try_add_wrapper()", - vim.fn.fnameescape(root_dir), - config.name - ) - ) - for _, bufnr in ipairs(vim.api.nvim_list_bufs()) do - local bufname = api.nvim_buf_get_name(bufnr) - if util.bufname_valid(bufname) then - local buf_dir = util.path.sanitize(bufname) - if buf_dir:sub(1, root_dir:len()) == root_dir then - M.manager.try_add_wrapper(bufnr) - end - end - end - elseif config.single_file_support then - -- This allows on_new_config to use the parent directory of the file - -- Effectively this is the root from lspconfig's perspective, as we use - -- this to attach additional files in the same parent folder to the same server. - -- We just no longer send rootDirectory or workspaceFolders during initialization. - local bufname = api.nvim_buf_get_name(0) - if not util.bufname_valid(bufname) then - return - end - local pseudo_root = util.path.dirname(util.path.sanitize(bufname)) - local client_id = M.manager.add(pseudo_root, true) - vim.lsp.buf_attach_client(vim.api.nvim_get_current_buf(), client_id) - end - end - - -- Used by :LspInfo - M.get_root_dir = get_root_dir - M.filetypes = config.filetypes - M.handlers = config.handlers - M.cmd = config.cmd - M.autostart = config.autostart - - -- In the case of a reload, close existing things. - local reload = false - if M.manager then - for _, client in ipairs(M.manager.clients()) do - client.stop(true) - end - reload = true - M.manager = nil - end - - local make_config = function(root_dir) - local new_config = vim.tbl_deep_extend('keep', vim.empty_dict(), config) - new_config = vim.tbl_deep_extend('keep', new_config, default_config) - new_config.capabilities = new_config.capabilities or lsp.protocol.make_client_capabilities() - new_config.capabilities = vim.tbl_deep_extend('keep', new_config.capabilities, { - workspace = { - configuration = true, - }, - }) - - if config_def.on_new_config then - pcall(config_def.on_new_config, new_config, root_dir) - end - if config.on_new_config then - pcall(config.on_new_config, new_config, root_dir) - end - - new_config.on_init = util.add_hook_after(new_config.on_init, function(client, result) - -- Handle offset encoding by default - if result.offsetEncoding then - client.offset_encoding = result.offsetEncoding - end - - -- Send `settings to server via workspace/didChangeConfiguration - function client.workspace_did_change_configuration(settings) - if not settings then - return - end - if vim.tbl_isempty(settings) then - settings = { [vim.type_idx] = vim.types.dictionary } - end - return client.notify('workspace/didChangeConfiguration', { - settings = settings, - }) - end - if not vim.tbl_isempty(new_config.settings) then - client.workspace_did_change_configuration(new_config.settings) - end - end) - - -- Save the old _on_attach so that we can reference it via the BufEnter. - new_config._on_attach = new_config.on_attach - new_config.on_attach = vim.schedule_wrap(function(client, bufnr) - if bufnr == api.nvim_get_current_buf() then - M._setup_buffer(client.id, bufnr) - else - api.nvim_command( - string.format( - "autocmd BufEnter <buffer=%d> ++once lua require'lspconfig'[%q]._setup_buffer(%d,%d)", - bufnr, - config_name, - client.id, - bufnr - ) - ) - end - end) - - new_config.root_dir = root_dir - new_config.workspace_folders = { - { - uri = vim.uri_from_fname(root_dir), - name = string.format('%s', root_dir), - }, - } - return new_config - end - - local manager = util.server_per_root_dir_manager(function(root_dir) - return make_config(root_dir) - end) - - function manager.try_add(bufnr) - bufnr = bufnr or api.nvim_get_current_buf() - - if vim.api.nvim_buf_get_option(bufnr, 'buftype') == 'nofile' then - return - end - - local id - local root_dir - - local bufname = api.nvim_buf_get_name(bufnr) - if not util.bufname_valid(bufname) then - return - end - local buf_path = util.path.sanitize(bufname) - - if get_root_dir then - root_dir = get_root_dir(buf_path, bufnr) - end - - if root_dir then - id = manager.add(root_dir, false) - elseif config.single_file_support then - local pseudo_root = util.path.dirname(buf_path) - id = manager.add(pseudo_root, true) - end - - if id then - lsp.buf_attach_client(bufnr, id) - end - end - - function manager.try_add_wrapper(bufnr) - bufnr = bufnr or api.nvim_get_current_buf() - local buf_filetype = vim.api.nvim_buf_get_option(bufnr, 'filetype') - if config.filetypes then - for _, filetype in ipairs(config.filetypes) do - if buf_filetype == filetype then - manager.try_add(bufnr) - return - end - end - else - manager.try_add(bufnr) - end - end - - M.manager = manager - M.make_config = make_config - if reload and config.autostart ~= false then - for _, bufnr in ipairs(vim.api.nvim_list_bufs()) do - manager.try_add_wrapper(bufnr) - end - end - end - - function M._setup_buffer(client_id, bufnr) - local client = lsp.get_client_by_id(client_id) - if not client then - return - end - if client.config._on_attach then - client.config._on_attach(client, bufnr) - end - if client.config.commands and not vim.tbl_isempty(client.config.commands) then - M.commands = vim.tbl_deep_extend('force', M.commands, client.config.commands) - end - if not M.commands_created and not vim.tbl_isempty(M.commands) then - -- Create the module commands - util.create_module_commands(config_name, M.commands) - M.commands_created = true - end - end - - M.commands_created = false - M.commands = config_def.commands - M.name = config_name - M.document_config = config_def - - rawset(t, config_name, M) - - return M -end - -return setmetatable({}, configs) diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/arduino_language_server.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/arduino_language_server.lua deleted file mode 100644 index 72f48a1..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/arduino_language_server.lua +++ /dev/null @@ -1,50 +0,0 @@ -local util = require 'lspconfig.util' - -return { - default_config = { - cmd = { 'arduino-language-server' }, - filetypes = { 'arduino' }, - root_dir = util.root_pattern '*.ino', - }, - docs = { - description = [[ -https://github.com/arduino/arduino-language-server - -Language server for Arduino - -The `arduino-language-server` can be installed by running: - go get -u github.com/arduino/arduino-language-server - -The `arduino-cli` tools must also be installed. Follow these instructions for your distro: - https://arduino.github.io/arduino-cli/latest/installation/ - -After installing the `arduino-cli` tools, follow these instructions for generating -a configuration file: - https://arduino.github.io/arduino-cli/latest/getting-started/#create-a-configuration-file -and make sure you install any relevant platforms libraries: - https://arduino.github.io/arduino-cli/latest/getting-started/#install-the-core-for-your-board - -The language server also requires `clangd` be installed. It will look for `clangd` by default but -the binary path can be overridden if need be. - -After all dependencies are installed you'll need to override the lspconfig command for the -language server in your setup function with the necessary configurations: - -```lua -lspconfig.arduino_language_server.setup({ - cmd = { - -- Required - "arduino-language-server", - "-cli-config", "/path/to/arduino-cli.yaml", - -- Optional - "-cli", "/path/to/arduino-cli", - "-clangd", "/path/to/clangd" - } -}) -``` - -For further instruction about configuration options, run `arduino-language-server --help`. - -]], - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/dartls.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/dartls.lua deleted file mode 100644 index eecb0b7..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/dartls.lua +++ /dev/null @@ -1,60 +0,0 @@ -local util = require 'lspconfig.util' - -local bin_name = 'dart' - -local find_dart_sdk_root_path = function() - if os.getenv 'FLUTTER_SDK' then - local flutter_path = os.getenv 'FLUTTER_SDK' - return util.path.join(flutter_path, 'cache', 'dart-sdk', 'bin', 'dart') - elseif vim.fn['executable'] 'flutter' == 1 then - local flutter_path = vim.fn['resolve'](vim.fn['exepath'] 'flutter') - local flutter_bin = vim.fn['fnamemodify'](flutter_path, ':h') - return util.path.join(flutter_bin, 'cache', 'dart-sdk', 'bin', 'dart') - elseif vim.fn['executable'] 'dart' == 1 then - return vim.fn['resolve'](vim.fn['exepath'] 'dart') - else - return '' - end -end - -local analysis_server_snapshot_path = function() - local dart_sdk_root_path = vim.fn['fnamemodify'](find_dart_sdk_root_path(), ':h') - local snapshot = util.path.join(dart_sdk_root_path, 'snapshots', 'analysis_server.dart.snapshot') - - if vim.fn['has'] 'win32' == 1 or vim.fn['has'] 'win64' == 1 then - snapshot = snapshot:gsub('/', '\\') - end - - return snapshot -end - -return { - default_config = { - cmd = { bin_name, analysis_server_snapshot_path(), '--lsp' }, - filetypes = { 'dart' }, - root_dir = util.root_pattern 'pubspec.yaml', - init_options = { - onlyAnalyzeProjectsWithOpenFiles = true, - suggestFromUnimportedLibraries = true, - closingLabels = true, - outline = true, - flutterOutline = true, - }, - settings = { - dart = { - completeFunctionCalls = true, - showTodos = true, - }, - }, - }, - docs = { - description = [[ -https://github.com/dart-lang/sdk/tree/master/pkg/analysis_server/tool/lsp_spec - -Language server for dart. -]], - default_config = { - root_dir = [[root_pattern("pubspec.yaml")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/denols.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/denols.lua deleted file mode 100644 index a7bed35..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/denols.lua +++ /dev/null @@ -1,114 +0,0 @@ -local util = require 'lspconfig.util' -local lsp = vim.lsp - -local function buf_cache(bufnr) - local params = {} - params['referrer'] = { uri = vim.uri_from_bufnr(bufnr) } - params['uris'] = {} - lsp.buf_request(bufnr, 'deno/cache', params, function(err) - if err then - error(tostring(err)) - end - end) -end - -local function virtual_text_document_handler(uri, result) - if not result then - return nil - end - - for client_id, res in pairs(result) do - local lines = vim.split(res.result, '\n') - local bufnr = vim.uri_to_bufnr(uri) - - local current_buf = vim.api.nvim_buf_get_lines(bufnr, 0, -1, false) - if #current_buf ~= 0 then - return nil - end - - vim.api.nvim_buf_set_lines(bufnr, 0, -1, nil, lines) - vim.api.nvim_buf_set_option(bufnr, 'readonly', true) - vim.api.nvim_buf_set_option(bufnr, 'modified', false) - vim.api.nvim_buf_set_option(bufnr, 'modifiable', false) - lsp.buf_attach_client(bufnr, client_id) - end -end - -local function virtual_text_document(uri) - local params = { - textDocument = { - uri = uri, - }, - } - local result = lsp.buf_request_sync(0, 'deno/virtualTextDocument', params) - virtual_text_document_handler(uri, result) -end - -local function denols_handler(err, result, ctx) - if not result or vim.tbl_isempty(result) then - return nil - end - - for _, res in pairs(result) do - local uri = res.uri or res.targetUri - if uri:match '^deno:' then - virtual_text_document(uri) - res['uri'] = uri - res['targetUri'] = uri - end - end - - lsp.handlers[ctx.method](err, result, ctx) -end - -return { - default_config = { - cmd = { 'deno', 'lsp' }, - filetypes = { - 'javascript', - 'javascriptreact', - 'javascript.jsx', - 'typescript', - 'typescriptreact', - 'typescript.tsx', - }, - root_dir = util.root_pattern('deno.json', 'deno.jsonc', 'tsconfig.json', '.git'), - init_options = { - enable = true, - lint = false, - unstable = false, - }, - handlers = { - ['textDocument/definition'] = denols_handler, - ['textDocument/references'] = denols_handler, - }, - }, - commands = { - DenolsCache = { - function() - buf_cache(0) - end, - description = 'Cache a module and all of its dependencies.', - }, - }, - docs = { - description = [[ -https://github.com/denoland/deno - -Deno's built-in language server - -To approrpiately highlight codefences returned from denols, you will need to augment vim.g.markdown_fenced languages - in your init.lua. Example: - -```lua -vim.g.markdown_fenced_languages = { - "ts=typescript" -} -``` - -]], - default_config = { - root_dir = [[root_pattern("deno.json", "deno.jsonc", "tsconfig.json", ".git")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/fortls.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/fortls.lua deleted file mode 100644 index 5879139..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/fortls.lua +++ /dev/null @@ -1,24 +0,0 @@ -local util = require 'lspconfig.util' - -return { - default_config = { - cmd = { 'fortls' }, - filetypes = { 'fortran' }, - root_dir = function(fname) - return util.root_pattern '.fortls'(fname) or util.find_git_ancestor(fname) - end, - settings = { - nthreads = 1, - }, - }, - docs = { - description = [[ -https://github.com/hansec/fortran-language-server - -Fortran Language Server for the Language Server Protocol - ]], - default_config = { - root_dir = [[root_pattern(".fortls")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/gopls.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/gopls.lua deleted file mode 100644 index f6a085d..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/gopls.lua +++ /dev/null @@ -1,22 +0,0 @@ -local util = require 'lspconfig.util' - -return { - default_config = { - cmd = { 'gopls' }, - filetypes = { 'go', 'gomod', 'gotmpl' }, - root_dir = function(fname) - return util.root_pattern 'go.work'(fname) or util.root_pattern('go.mod', '.git')(fname) - end, - single_file_support = true, - }, - docs = { - description = [[ -https://github.com/golang/tools/tree/master/gopls - -Google's lsp server for golang. -]], - default_config = { - root_dir = [[root_pattern("go.mod", ".git")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/graphql.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/graphql.lua deleted file mode 100644 index d34881c..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/graphql.lua +++ /dev/null @@ -1,33 +0,0 @@ -local util = require 'lspconfig.util' - -local bin_name = 'graphql-lsp' -local cmd = { bin_name, 'server', '-m', 'stream' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, 'server', '-m', 'stream' } -end - -return { - default_config = { - cmd = cmd, - filetypes = { 'graphql', 'typescriptreact', 'javascriptreact' }, - root_dir = util.root_pattern('.git', '.graphqlrc*', '.graphql.config.*', 'graphql.config.*'), - }, - - docs = { - description = [[ -https://github.com/graphql/graphiql/tree/main/packages/graphql-language-service-cli - -`graphql-lsp` can be installed via `npm`: - -```sh -npm install -g graphql-language-service-cli -``` - -Note that you must also have [the graphql package](https://github.com/graphql/graphql-js) installed and create a [GraphQL config file](https://www.graphql-config.com/docs/user/user-introduction). -]], - default_config = { - root_dir = [[root_pattern('.git', '.graphqlrc*', '.graphql.config.*')]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ltex.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ltex.lua deleted file mode 100644 index 0aeb387..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ltex.lua +++ /dev/null @@ -1,47 +0,0 @@ -local util = require 'lspconfig.util' - -local language_id_mapping = { - bib = 'bibtex', - plaintex = 'tex', - rnoweb = 'sweave', - rst = 'restructuredtext', - tex = 'latex', - xhtml = 'xhtml', -} - -local bin_name = 'ltex-ls' -if vim.fn.has 'win32' == 1 then - bin_name = bin_name .. '.bat' -end - -return { - default_config = { - cmd = { bin_name }, - filetypes = { 'bib', 'gitcommit', 'markdown', 'org', 'plaintex', 'rst', 'rnoweb', 'tex' }, - root_dir = util.find_git_ancestor, - single_file_support = true, - get_language_id = function(_, filetype) - local language_id = language_id_mapping[filetype] - if language_id then - return language_id - else - return filetype - end - end, - }, - docs = { - description = [=[ -https://github.com/valentjn/ltex-ls - -LTeX Language Server: LSP language server for LanguageTool 🔍✔️ with support for LaTeX 🎓, Markdown 📝, and others - -To install, download the latest [release](https://github.com/valentjn/ltex-ls/releases) and ensure `ltex-ls` is on your path. - -To support org files or R sweave, users can define a custom filetype autocommand (or use a plugin which defines these filetypes): - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.org set filetype=org ]] -``` -]=], - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/omnisharp.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/omnisharp.lua deleted file mode 100644 index b51d898..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/omnisharp.lua +++ /dev/null @@ -1,52 +0,0 @@ -local util = require 'lspconfig.util' - -return { - default_config = { - filetypes = { 'cs', 'vb' }, - root_dir = function(fname) - return util.root_pattern '*.sln'(fname) or util.root_pattern '*.csproj'(fname) - end, - on_new_config = function(new_config, new_root_dir) - if new_root_dir then - table.insert(new_config.cmd, '-s') - table.insert(new_config.cmd, new_root_dir) - end - end, - init_options = {}, - }, - -- on_new_config = function(new_config) end; - -- on_attach = function(client, bufnr) end; - docs = { - description = [[ -https://github.com/omnisharp/omnisharp-roslyn -OmniSharp server based on Roslyn workspaces - -`omnisharp-roslyn` can be installed by downloading and extracting a release from [here](https://github.com/OmniSharp/omnisharp-roslyn/releases). -Omnisharp can also be built from source by following the instructions [here](https://github.com/omnisharp/omnisharp-roslyn#downloading-omnisharp). - -Omnisharp requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -**By default, omnisharp-roslyn doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. - -```lua -local pid = vim.fn.getpid() --- On linux/darwin if using a release build, otherwise under scripts/OmniSharp(.Core)(.cmd) -local omnisharp_bin = "/path/to/omnisharp-repo/run" --- on Windows --- local omnisharp_bin = "/path/to/omnisharp/OmniSharp.exe" -require'lspconfig'.omnisharp.setup{ - cmd = { omnisharp_bin, "--languageserver" , "--hostPID", tostring(pid) }; - ... -} -``` - -Note, if you download the executable for darwin you will need to strip the quarantine label to run: -```bash -find /path/to/omnisharp-osx | xargs xattr -r -d com.apple.quarantine -``` -]], - default_config = { - root_dir = [[root_pattern(".sln") or root_pattern(".csproj")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/purescriptls.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/purescriptls.lua deleted file mode 100644 index 495133d..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/purescriptls.lua +++ /dev/null @@ -1,28 +0,0 @@ -local util = require 'lspconfig.util' - -local bin_name = 'purescript-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - -return { - default_config = { - cmd = cmd, - filetypes = { 'purescript' }, - root_dir = util.root_pattern('bower.json', 'psc-package.json', 'spago.dhall'), - }, - docs = { - description = [[ -https://github.com/nwolverson/purescript-language-server -`purescript-language-server` can be installed via `npm` -```sh -npm install -g purescript-language-server -``` -]], - default_config = { - root_dir = [[root_pattern("spago.dhall, 'psc-package.json', bower.json")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/pylsp.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/pylsp.lua deleted file mode 100644 index 7284fac..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/pylsp.lua +++ /dev/null @@ -1,31 +0,0 @@ -local util = require 'lspconfig.util' - -return { - default_config = { - cmd = { 'pylsp' }, - filetypes = { 'python' }, - root_dir = function(fname) - local root_files = { - 'pyproject.toml', - 'setup.py', - 'setup.cfg', - 'requirements.txt', - 'Pipfile', - } - return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) - end, - single_file_support = true, - }, - docs = { - description = [[ -https://github.com/python-lsp/python-lsp-server - -A Python 3.6+ implementation of the Language Server Protocol. - -The language server can be installed via `pipx install 'python-lsp-server[all]'`. -Further instructions can be found in the [project's README](https://github.com/python-lsp/python-lsp-server). - -Note: This is a community fork of `pyls`. - ]], - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/pyright.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/pyright.lua deleted file mode 100644 index a198477..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/pyright.lua +++ /dev/null @@ -1,56 +0,0 @@ -local util = require 'lspconfig.util' - -local bin_name = 'pyright-langserver' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - -local root_files = { - 'pyproject.toml', - 'setup.py', - 'setup.cfg', - 'requirements.txt', - 'Pipfile', - 'pyrightconfig.json', -} - -local function organize_imports() - local params = { - command = 'pyright.organizeimports', - arguments = { vim.uri_from_bufnr(0) }, - } - vim.lsp.buf.execute_command(params) -end - -return { - default_config = { - cmd = cmd, - filetypes = { 'python' }, - root_dir = util.root_pattern(unpack(root_files)), - single_file_support = true, - settings = { - python = { - analysis = { - autoSearchPaths = true, - useLibraryCodeForTypes = true, - diagnosticMode = 'workspace', - }, - }, - }, - }, - commands = { - PyrightOrganizeImports = { - organize_imports, - description = 'Organize Imports', - }, - }, - docs = { - description = [[ -https://github.com/microsoft/pyright - -`pyright`, a static type checker and language server for python -]], - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rescriptls.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rescriptls.lua deleted file mode 100644 index 1c80ada..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rescriptls.lua +++ /dev/null @@ -1,42 +0,0 @@ -local util = require 'lspconfig.util' - -return { - default_config = { - cmd = {}, - filetypes = { 'rescript' }, - root_dir = util.root_pattern('bsconfig.json', '.git'), - settings = {}, - }, - docs = { - description = [[ -https://github.com/rescript-lang/rescript-vscode - -ReScript language server - -**By default, rescriptls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -You can use the bundled language server inside the [vim-rescript](https://github.com/rescript-lang/vim-rescript) repo. - -Clone the vim-rescript repo and point `cmd` to `server.js` inside `server/out` directory: - -```lua -cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'} - -``` - -If you have vim-rescript installed you can also use that installation. for example if you're using packer.nvim you can set cmd to something like this: - -```lua -cmd = { - 'node', - '/home/username/.local/share/nvim/site/pack/packer/start/vim-rescript/server/out/server.js', - '--stdio' -} -``` - -Another option is to use vscode extension [release](https://github.com/rescript-lang/rescript-vscode/releases). -Take a look at [here](https://github.com/rescript-lang/rescript-vscode#use-with-other-editors) for instructions. -]], - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rust_analyzer.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rust_analyzer.lua deleted file mode 100644 index 6331cf5..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rust_analyzer.lua +++ /dev/null @@ -1,79 +0,0 @@ -local util = require 'lspconfig.util' - -local function reload_workspace(bufnr) - bufnr = util.validate_bufnr(bufnr) - vim.lsp.buf_request(bufnr, 'rust-analyzer/reloadWorkspace', nil, function(err) - if err then - error(tostring(err)) - end - vim.notify 'Cargo workspace reloaded' - end) -end - -return { - default_config = { - cmd = { 'rust-analyzer' }, - filetypes = { 'rust' }, - root_dir = function(fname) - local cargo_crate_dir = util.root_pattern 'Cargo.toml'(fname) - local cmd = { 'cargo', 'metadata', '--no-deps', '--format-version', '1' } - if cargo_crate_dir ~= nil then - cmd[#cmd + 1] = '--manifest-path' - cmd[#cmd + 1] = util.path.join(cargo_crate_dir, 'Cargo.toml') - end - local cargo_metadata = '' - local cargo_metadata_err = '' - local cm = vim.fn.jobstart(cmd, { - on_stdout = function(_, d, _) - cargo_metadata = table.concat(d, '\n') - end, - on_stderr = function(_, d, _) - cargo_metadata_err = table.concat(d, '\n') - end, - stdout_buffered = true, - stderr_buffered = true, - }) - if cm > 0 then - cm = vim.fn.jobwait({ cm })[1] - else - cm = -1 - end - local cargo_workspace_dir = nil - if cm == 0 then - cargo_workspace_dir = vim.fn.json_decode(cargo_metadata)['workspace_root'] - else - vim.notify( - string.format('[lspconfig] cmd (%q) failed:\n%s', table.concat(cmd, ' '), cargo_metadata_err), - vim.log.levels.WARN - ) - end - return cargo_workspace_dir - or cargo_crate_dir - or util.root_pattern 'rust-project.json'(fname) - or util.find_git_ancestor(fname) - end, - settings = { - ['rust-analyzer'] = {}, - }, - }, - commands = { - CargoReload = { - function() - reload_workspace(0) - end, - description = 'Reload current cargo workspace', - }, - }, - docs = { - description = [[ -https://github.com/rust-analyzer/rust-analyzer - -rust-analyzer (aka rls 2.0), a language server for Rust - -See [docs](https://github.com/rust-analyzer/rust-analyzer/tree/master/docs/user#settings) for extra settings. - ]], - default_config = { - root_dir = [[root_pattern("Cargo.toml", "rust-project.json")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/solidity_ls.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/solidity_ls.lua deleted file mode 100644 index 4d4c490..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/solidity_ls.lua +++ /dev/null @@ -1,24 +0,0 @@ -local util = require 'lspconfig.util' - -local bin_name = 'solidity-language-server' -if vim.fn.has 'win32' == 1 then - bin_name = bin_name .. '.cmd' -end - -return { - default_config = { - cmd = { bin_name, '--stdio' }, - filetypes = { 'solidity' }, - root_dir = util.root_pattern('.git', 'package.json'), - }, - docs = { - description = [[ -npm install -g solidity-language-server - -solidity-language-server is a language server for the solidity language ported from the vscode solidity extension -]], - default_config = { - root_dir = [[root_pattern(".git", "package.json")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sourcekit.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sourcekit.lua deleted file mode 100644 index d90b30a..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sourcekit.lua +++ /dev/null @@ -1,19 +0,0 @@ -local util = require 'lspconfig.util' - -return { - default_config = { - cmd = { 'sourcekit-lsp' }, - filetypes = { 'swift', 'c', 'cpp', 'objective-c', 'objective-cpp' }, - root_dir = util.root_pattern('Package.swift', '.git'), - }, - docs = { - description = [[ -https://github.com/apple/sourcekit-lsp - -Language server for Swift and C/C++/Objective-C. - ]], - default_config = { - root_dir = [[root_pattern("Package.swift", ".git")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sourcery.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sourcery.lua deleted file mode 100644 index 9100c5a..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sourcery.lua +++ /dev/null @@ -1,55 +0,0 @@ -local util = require 'lspconfig/util' - -local root_files = { - 'pyproject.toml', - 'setup.py', - 'setup.cfg', - 'requirements.txt', - 'Pipfile', - 'pyrightconfig.json', -} - -return { - default_config = { - cmd = { 'sourcery', 'lsp' }, - filetypes = { 'python' }, - init_options = { - editor_version = 'vim', - extension_version = 'vim.lsp', - token = nil, - }, - root_dir = function(fname) - return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) - end, - single_file_support = true, - }, - on_new_config = function(new_config, _) - if not new_config.init_options.token then - local notify = vim.notify_once or vim.notify - notify('[lspconfig] The authentication token must be provided in config.init_options', vim.log.levels.ERROR) - end - end, - docs = { - description = [[ -https://github.com/sourcery-ai/sourcery - -Refactor Python instantly using the power of AI. - -It requires the initializationOptions param to be populated as shown below and will respond with the list of ServerCapabilities that it supports. - -init_options = { - --- The Sourcery token for authenticating the user. - --- This is retrieved from the Sourcery website and must be - --- provided by each user. The extension must provide a - --- configuration option for the user to provide this value. - token = <YOUR_TOKEN> - - --- The extension's name and version as defined by the extension. - extension_version = 'vim.lsp' - - --- The editor's name and version as defined by the editor. - editor_version = 'vim' -} -]], - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sumneko_lua.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sumneko_lua.lua deleted file mode 100644 index 6338095..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sumneko_lua.lua +++ /dev/null @@ -1,63 +0,0 @@ -local util = require 'lspconfig.util' - -local root_files = { - '.luarc.json', - '.luacheckrc', - '.stylua.toml', - 'selene.toml', -} -return { - default_config = { - cmd = { 'lua-language-server' }, - filetypes = { 'lua' }, - root_dir = function(fname) - return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) - end, - single_file_support = true, - log_level = vim.lsp.protocol.MessageType.Warning, - settings = { Lua = { telemetry = { enable = false } } }, - }, - docs = { - description = [[ -https://github.com/sumneko/lua-language-server - -Lua language server. - -`lua-language-server` can be installed by following the instructions [here](https://github.com/sumneko/lua-language-server/wiki/Build-and-Run). The default `cmd` assumes that the `lua-language-server` binary can be found in `$PATH`. - -```lua -local runtime_path = vim.split(package.path, ';') -table.insert(runtime_path, "lua/?.lua") -table.insert(runtime_path, "lua/?/init.lua") - -require'lspconfig'.sumneko_lua.setup { - settings = { - Lua = { - runtime = { - -- Tell the language server which version of Lua you're using (most likely LuaJIT in the case of Neovim) - version = 'LuaJIT', - -- Setup your lua path - path = runtime_path, - }, - diagnostics = { - -- Get the language server to recognize the `vim` global - globals = {'vim'}, - }, - workspace = { - -- Make the server aware of Neovim runtime files - library = vim.api.nvim_get_runtime_file("", true), - }, - -- Do not send telemetry data containing a randomized but unique identifier - telemetry = { - enable = false, - }, - }, - }, -} -``` -]], - default_config = { - root_dir = [[root_pattern(".luarc.json", ".luacheckrc", ".stylua.toml", "selene.toml", ".git")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/tsserver.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/tsserver.lua deleted file mode 100644 index 0f916fe..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/tsserver.lua +++ /dev/null @@ -1,60 +0,0 @@ -local util = require 'lspconfig.util' - -local bin_name = 'typescript-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - -return { - default_config = { - init_options = { hostInfo = 'neovim' }, - cmd = cmd, - filetypes = { - 'javascript', - 'javascriptreact', - 'javascript.jsx', - 'typescript', - 'typescriptreact', - 'typescript.tsx', - }, - root_dir = function(fname) - return util.root_pattern 'tsconfig.json'(fname) - or util.root_pattern('package.json', 'jsconfig.json', '.git')(fname) - end, - }, - docs = { - description = [[ -https://github.com/theia-ide/typescript-language-server - -`typescript-language-server` depends on `typescript`. Both packages can be installed via `npm`: -```sh -npm install -g typescript typescript-language-server -``` - -To configure type language server, add a -[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or -[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your -project. - -Here's an example that disables type checking in JavaScript files. - -```json -{ - "compilerOptions": { - "module": "commonjs", - "target": "es6", - "checkJs": false - }, - "exclude": [ - "node_modules" - ] -} -``` -]], - default_config = { - root_dir = [[root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vls.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vls.lua deleted file mode 100644 index 36255c0..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vls.lua +++ /dev/null @@ -1,32 +0,0 @@ -local util = require 'lspconfig.util' - -return { - default_config = { - filetypes = { 'vlang' }, - root_dir = util.root_pattern('v.mod', '.git'), - }, - docs = { - description = [[ -https://github.com/vlang/vls - -V language server. - -`v-language-server` can be installed by following the instructions [here](https://github.com/vlang/vls#installation). - -**By default, v-language-server doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped and compiled v-language-server. - -```lua --- set the path to the vls installation; -local vls_root_path = vim.fn.stdpath('cache')..'/lspconfig/vls' -local vls_binary = vls_root_path.."/cmd/vls/vls" - -require'lspconfig'.vls.setup { - cmd = {vls_binary}, -} -``` -]], - default_config = { - root_dir = [[root_pattern("v.mod", ".git")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/volar.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/volar.lua deleted file mode 100644 index 7742757..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/volar.lua +++ /dev/null @@ -1,138 +0,0 @@ -local util = require 'lspconfig.util' - -local function get_typescript_server_path(root_dir) - local project_root = util.find_node_modules_ancestor(root_dir) - return project_root and (util.path.join(project_root, 'node_modules', 'typescript', 'lib', 'tsserverlibrary.js')) - or '' -end - --- https://github.com/johnsoncodehk/volar/blob/master/packages/shared/src/types.ts -local volar_init_options = { - typescript = { - serverPath = '', - }, - languageFeatures = { - implementation = true, - -- not supported - https://github.com/neovim/neovim/pull/14122 - semanticTokens = false, - references = true, - definition = true, - typeDefinition = true, - callHierarchy = true, - hover = true, - rename = true, - renameFileRefactoring = true, - signatureHelp = true, - codeAction = true, - completion = { - defaultTagNameCase = 'both', - defaultAttrNameCase = 'kebabCase', - }, - schemaRequestService = true, - documentHighlight = true, - documentLink = true, - codeLens = true, - diagnostics = true, - }, - documentFeatures = { - -- not supported - https://github.com/neovim/neovim/pull/13654 - documentColor = false, - selectionRange = true, - foldingRange = true, - linkedEditingRange = true, - documentSymbol = true, - documentFormatting = { - defaultPrintWidth = 100, - }, - }, -} - -local bin_name = 'vue-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end -return { - default_config = { - cmd = cmd, - filetypes = { 'vue' }, - root_dir = util.root_pattern 'package.json', - init_options = volar_init_options, - on_new_config = function(new_config, new_root_dir) - if - new_config.init_options - and new_config.init_options.typescript - and new_config.init_options.typescript.serverPath == '' - then - new_config.init_options.typescript.serverPath = get_typescript_server_path(new_root_dir) - end - end, - }, - docs = { - description = [[ -https://github.com/johnsoncodehk/volar/tree/master/packages/vue-language-server - -Volar language server for Vue - -Volar can be installed via npm: - -```sh -npm install -g @volar/vue-language-server -``` - -Volar by default supports Vue 3 projects. Vue 2 projects need [additional configuration](https://github.com/johnsoncodehk/volar/blob/master/extensions/vscode-vue-language-features/README.md?plain=1#L28-L63). - -**Take Over Mode** -Volar can serve as a language server for both Vue and TypeScript via [Take Over Mode](https://github.com/johnsoncodehk/volar/discussions/471). - -To enable Take Over Mode, override the default filetypes in `setup{}` as follows: - -```lua -require'lspconfig'.volar.setup{ - filetypes = {'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue', 'json'} -} -``` - -**Overriding the default TypeScript Server used by Volar** -The default config looks for TS in the local node_modules. The alternatives are: - -- use a global TypeScript Server installation - -```lua -require'lspconfig'.volar.setup{ - init_options = { - typescript = { - serverPath = '/path/to/.npm/lib/node_modules/typescript/lib/tsserverlib.js' - } - } -} -``` - -- use a global TypeScript Server installation if a local server is not found - -```lua -local util = require 'lspconfig.util' - -local function get_typescript_server_path(root_dir) - local project_root = util.find_node_modules_ancestor(root_dir) - - local local_tsserverlib = project_root ~= nil and util.path.join(project_root, 'node_modules', 'typescript', 'lib', 'tsserverlibrary.js') - local global_tsserverlib = '/home/[yourusernamehere]/.npm/lib/node_modules/typescript/lib/tsserverlibrary.js' - - if local_tsserverlib and util.path.exists(local_tsserverlib) then - return local_tsserverlib - else - return global_tsserverlib - end -end - -require'lspconfig'.volar.setup{ - on_new_config = function(new_config, new_root_dir) - new_config.init_options.typescript.serverPath = get_typescript_server_path(new_root_dir) - end, -} -``` - ]], - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/zeta_note.lua b/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/zeta_note.lua deleted file mode 100644 index 9798af9..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/zeta_note.lua +++ /dev/null @@ -1,28 +0,0 @@ -local util = require 'lspconfig.util' - -return { - default_config = { - filetypes = { 'markdown' }, - root_dir = util.root_pattern '.zeta.toml', - }, - docs = { - description = [[ -https://github.com/artempyanykh/zeta-note - -Markdown LSP server for easy note-taking with cross-references and diagnostics. - -Binaries can be downloaded from https://github.com/artempyanykh/zeta-note/releases - -**By default, zeta-note doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your zeta-note binary. - -```lua -require'lspconfig'.zeta_note.setup{ - cmd = {'path/to/zeta-note'} -} -``` -]], - default_config = { - root_dir = [[root_pattern(".zeta.toml")]], - }, - }, -} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/ui/lspinfo.lua b/start/lspconfig-0.1.3/lua/lspconfig/ui/lspinfo.lua deleted file mode 100644 index 42a7fed..0000000 --- a/start/lspconfig-0.1.3/lua/lspconfig/ui/lspinfo.lua +++ /dev/null @@ -1,225 +0,0 @@ -local configs = require 'lspconfig.configs' -local windows = require 'lspconfig.ui.windows' -local util = require 'lspconfig.util' - -local error_messages = { - cmd_not_found = 'Unable to find executable. Please check your path and ensure the server is installed', - no_filetype_defined = 'No filetypes defined, Please define filetypes in setup()', -} - -local function trim_blankspace(cmd) - local trimmed_cmd = {} - for _, str in pairs(cmd) do - table.insert(trimmed_cmd, str:match '^%s*(.*)') - end - return trimmed_cmd -end - -local function indent_lines(lines, offset) - return vim.tbl_map(function(val) - return offset .. val - end, lines) -end - -local function remove_newlines(cmd) - cmd = trim_blankspace(cmd) - cmd = table.concat(cmd, ' ') - cmd = vim.split(cmd, '\n') - cmd = trim_blankspace(cmd) - cmd = table.concat(cmd, ' ') - return cmd -end - -local function make_config_info(config) - local config_info = {} - config_info.name = config.name - if config.cmd then - config_info.cmd = remove_newlines(config.cmd) - if vim.fn.executable(config.cmd[1]) == 1 then - config_info.cmd_is_executable = 'true' - else - config_info.cmd_is_executable = error_messages.cmd_not_found - end - else - config_info.cmd = 'cmd not defined' - config_info.cmd_is_executable = 'NA' - end - - local buffer_dir = vim.fn.expand '%:p:h' - config_info.root_dir = config.get_root_dir(buffer_dir) or 'NA' - config_info.autostart = (config.autostart and 'true') or 'false' - config_info.handlers = table.concat(vim.tbl_keys(config.handlers), ', ') - config_info.filetypes = table.concat(config.filetypes or {}, ', ') - - local lines = { - 'Config: ' .. config_info.name, - } - - local info_lines = { - 'filetypes: ' .. config_info.filetypes, - 'root directory: ' .. config_info.root_dir, - 'cmd: ' .. config_info.cmd, - 'cmd is executable: ' .. config_info.cmd_is_executable, - 'autostart: ' .. config_info.autostart, - 'custom handlers: ' .. config_info.handlers, - } - - vim.list_extend(lines, indent_lines(info_lines, '\t')) - - return lines -end - -local function make_client_info(client) - local client_info = {} - - client_info.cmd = remove_newlines(client.config.cmd) - if client.workspaceFolders then - client_info.root_dir = client.workspaceFolders[1].name - else - client_info.root_dir = 'Running in single file mode.' - end - client_info.filetypes = table.concat(client.config.filetypes or {}, ', ') - client_info.autostart = (client.config.autostart and 'true') or 'false' - client_info.attached_buffers_list = table.concat(vim.lsp.get_buffers_by_client_id(client.id), ', ') - - local lines = { - '', - 'Client: ' - .. client.name - .. ' (id: ' - .. tostring(client.id) - .. ', pid: ' - .. tostring(client.rpc.pid) - .. ', bufnr: [' - .. client_info.attached_buffers_list - .. '])', - } - - local info_lines = { - 'filetypes: ' .. client_info.filetypes, - 'autostart: ' .. client_info.autostart, - 'root directory: ' .. client_info.root_dir, - 'cmd: ' .. client_info.cmd, - } - - if client.config.lspinfo then - local server_specific_info = client.config.lspinfo(client.config) - info_lines = vim.list_extend(info_lines, server_specific_info) - end - - vim.list_extend(lines, indent_lines(info_lines, '\t')) - - return lines -end - -return function() - -- These options need to be cached before switching to the floating - -- buffer. - local buf_clients = vim.lsp.buf_get_clients() - local clients = vim.lsp.get_active_clients() - local buffer_filetype = vim.bo.filetype - - local win_info = windows.percentage_range_window(0.8, 0.7) - local bufnr, win_id = win_info.bufnr, win_info.win_id - - local buf_lines = {} - - local buf_client_names = {} - for _, client in pairs(buf_clients) do - table.insert(buf_client_names, client.name) - end - - local buf_client_ids = {} - for _, client in pairs(buf_clients) do - table.insert(buf_client_ids, client.id) - end - - local other_active_clients = {} - local client_names = {} - for _, client in pairs(clients) do - if not vim.tbl_contains(buf_client_ids, client.id) then - table.insert(other_active_clients, client) - end - table.insert(client_names, client.name) - end - - local header = { - '', - 'Language client log: ' .. (vim.lsp.get_log_path()), - 'Detected filetype: ' .. buffer_filetype, - } - vim.list_extend(buf_lines, header) - - local buffer_clients_header = { - '', - tostring(#vim.tbl_keys(buf_clients)) .. ' client(s) attached to this buffer: ', - } - - vim.list_extend(buf_lines, buffer_clients_header) - for _, client in pairs(buf_clients) do - local client_info = make_client_info(client) - vim.list_extend(buf_lines, client_info) - end - - local other_active_section_header = { - '', - tostring(#other_active_clients) .. ' active client(s) not attached to this buffer: ', - } - if not vim.tbl_isempty(other_active_clients) then - vim.list_extend(buf_lines, other_active_section_header) - end - for _, client in pairs(other_active_clients) do - local client_info = make_client_info(client) - vim.list_extend(buf_lines, client_info) - end - - local other_matching_configs_header = { - '', - 'Other clients that match the filetype: ' .. buffer_filetype, - '', - } - - local other_matching_configs = util.get_other_matching_providers(buffer_filetype) - - if not vim.tbl_isempty(other_matching_configs) then - vim.list_extend(buf_lines, other_matching_configs_header) - for _, config in pairs(other_matching_configs) do - vim.list_extend(buf_lines, make_config_info(config)) - end - end - - local matching_config_header = { - '', - 'Configured servers list: ' .. table.concat(vim.tbl_keys(configs), ', '), - } - vim.list_extend(buf_lines, matching_config_header) - - local fmt_buf_lines = indent_lines(buf_lines, ' ') - - fmt_buf_lines = vim.lsp.util._trim(fmt_buf_lines, {}) - - vim.api.nvim_buf_set_lines(bufnr, 0, -1, true, fmt_buf_lines) - vim.api.nvim_buf_set_option(bufnr, 'modifiable', false) - vim.api.nvim_buf_set_option(bufnr, 'filetype', 'lspinfo') - - vim.api.nvim_buf_set_keymap(bufnr, 'n', '<esc>', '<cmd>bd<CR>', { noremap = true }) - vim.api.nvim_command( - string.format('autocmd BufHidden,BufLeave <buffer> ++once lua pcall(vim.api.nvim_win_close, %d, true)', win_id) - ) - - vim.fn.matchadd( - 'Error', - error_messages.no_filetype_defined .. '.\\|' .. 'cmd not defined\\|' .. error_messages.cmd_not_found - ) - vim.cmd 'let m=matchadd("string", "true")' - vim.cmd 'let m=matchadd("error", "false")' - for _, config in pairs(configs) do - vim.fn.matchadd('Title', '\\%(Client\\|Config\\):.*\\zs' .. config.name .. '\\ze') - vim.fn.matchadd('Visual', 'list:.*\\zs' .. config.name .. '\\ze') - if config.filetypes then - for _, ft in pairs(config.filetypes) do - vim.fn.matchadd('Type', '\\%(filetypes\\|filetype\\):.*\\zs' .. ft .. '\\ze') - end - end - end -end diff --git a/start/lspconfig-0.1.3/plugin/lspconfig.vim b/start/lspconfig-0.1.3/plugin/lspconfig.vim deleted file mode 100644 index 5c52d4e..0000000 --- a/start/lspconfig-0.1.3/plugin/lspconfig.vim +++ /dev/null @@ -1,16 +0,0 @@ -if exists('g:lspconfig') - finish -endif -let g:lspconfig = 1 - -lua << EOF -lsp_complete_configured_servers = function() - return table.concat(require'lspconfig'.available_servers(), '\n') -end -lsp_get_active_client_ids = function() - return vim.tbl_map(function(client) - return ("%d (%s)"):format(client.id, client.name) - end, require'lspconfig.util'.get_managed_clients()) -end -require'lspconfig'._root._setup() -EOF diff --git a/start/lspconfig-0.1.3/LICENSE.md b/start/lspconfig-0.1.8/LICENSE.md index be03814..d9a10c0 100644 --- a/start/lspconfig-0.1.3/LICENSE.md +++ b/start/lspconfig-0.1.8/LICENSE.md @@ -1,10 +1,3 @@ -Copyright Neovim contributors. All rights reserved. - -nvim-lsp is licensed under the terms of the Apache 2.0 license. - -nvim-lsp's license follows: - -==== Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ diff --git a/start/lspconfig-0.1.3/doc/lspconfig.txt b/start/lspconfig-0.1.8/doc/lspconfig.txt index d1d9103..50a8f9d 100644 --- a/start/lspconfig-0.1.3/doc/lspconfig.txt +++ b/start/lspconfig-0.1.8/doc/lspconfig.txt @@ -1,29 +1,14 @@ -*lspconfig.txt* For Nvim version 0.6.1+ Last change: 2021 Nov 7 -============================================================================== -TABLE OF CONTENTS *lspconfig-toc* - -1. Introduction (|lspconfig|) -2. LSP overview (|lspconfig-lsp|) -3. Quickstart (|lspconfig-quickstart|) -4. Setup {} (|lspconfig-setup|) -5. Global defaults (|lspconfig-global-defaults|) -6. Server configurations (|lspconfig-configurations|) - 6a. Adding servers (|lspconfig-adding-servers|) -7. Root directories (|lspconfig-root-detection|) - 7a. Advanced detection (|lspconfig-root-advanced|) - 7b. Single file support (|lspconfig-single-file-support|) -8. Commands (|lspconfig-commands|) -9. Keybindings (|lspconfig-keybindings|) -10. Completion (|lspconfig-completion|) -11. Debugging (|lspconfig-debugging|) -12. Logging (|lspconfig-logging|) -13. Scope (|lspconfig-scope|) +*lspconfig.txt* For Nvim version 0.8+ + +nvim-lspconfig provides user-contributed configs for the Nvim |lsp| client. + + Type |gO| to see the table of contents. ============================================================================== INTRODUCTION *lspconfig* -`lspconfig` is a collection of community contributed configurations for the -built-in language server client in Neovim core. This plugin provides four +nvim-lspconfig is a collection of community-contributed configurations for the +built-in language server client in Nvim core. This plugin provides four primary functionalities: - default launch commands, initialization options, and settings for each @@ -35,33 +20,10 @@ primary functionalities: - utility commands such as LspInfo, LspStart, LspStop, and LspRestart for managing language server instances -`lspconfig` is not required to use the built-in client, it is only one front-end -interface for when a language server specific plugin is not available. - -See |lspconfig-server-configurations| by typing `K` over it for the complete -list of language servers configurations. - -============================================================================== -LSP OVERVIEW *lspconfig-lsp* - -Nvim supports the Language Server Protocol (LSP) via the built-in language -server client. LSP facilitates many features, some of which include: - -- go-to-definition -- find-references -- hover -- completion -- rename -- format -- refactor - -These features are implemented in Neovim core, not `lspconfig`. See `:help lsp` -for more details. +nvim-lspconfig is not required to use the builtin Nvim |lsp| client, it is +just a convenience layer. -NOTE: Feature availability depends on the implementation details of the -server. A server may implement only a subset of these features. Always -consult the server documentation before filing a bug report on a missing -feature. +See |lspconfig-all| for the complete list of language server configurations. ============================================================================== QUICKSTART *lspconfig-quickstart* @@ -73,12 +35,12 @@ QUICKSTART *lspconfig-quickstart* require'lspconfig'.clangd.setup{} < - create a new project, ensure that it contains a root marker which matches the - server requirements specified in |lspconfig-server-configurations|. + server requirements specified in |lspconfig-all|. - open a file within that project, such as `main.c`. - If you need more information about a server configuration, read the corresponding - entry in |lspconfig-server-configurations|. + entry in |lspconfig-all|. ============================================================================== THE SETUP METAMETHOD *lspconfig-setup* @@ -92,9 +54,8 @@ Using the default configuration for a server is simple: > require'lspconfig'.clangd.setup{} < -The available server names are listed in |lspconfig-server-configurations| and -match the server name in `config.SERVER_NAME` defined in each configuration's -source file. +The available server names are listed in |lspconfig-all| and match the server +name in `config.SERVER_NAME` defined in each configuration's source file. The purpose of `setup{}` is to wrap the call to Nvim's built-in `vim.lsp.start_client()` with an autocommand that automatically launch a @@ -186,7 +147,7 @@ passed overrides to `setup {}` are: < is: > - {'foo', '--bar', 'baz} + {'foo', '--bar', 'baz'} < - {handlers} `list[functions]` @@ -207,13 +168,13 @@ passed overrides to `setup {}` are: Callback invoked by Nvim's built-in client when attaching a buffer to a language server. Often used to set Nvim (buffer or global) options or to - override the Nvim client properties (`resolved_capabilities`) after a + override the Nvim client properties (`server_capabilities`) after a language server attaches. Most commonly used for settings buffer local keybindings. See |lspconfig-keybindings| for a usage example. - {settings} `table <string, string|table|bool>` - The `settings` table is sent in `on_init` via a + The `settings` table is sent after initialization via a `workspace/didChangeConfiguration` notification from the Nvim client to the language server. These settings allow a user to change optional runtime settings of the language server. @@ -254,12 +215,12 @@ The global defaults for all servers can be overridden by extending the if params and params.type <= vim.lsp.protocol.MessageType.Log then vim.lsp.handlers["window/logMessage"](err, method, params, client_id) end - end; + end, ["window/showMessage"] = function(err, method, params, client_id) if params and params.type <= vim.lsp.protocol.MessageType.Warning.Error then vim.lsp.handlers["window/showMessage"](err, method, params, client_id) end - end; + end, } } ) @@ -267,10 +228,31 @@ The global defaults for all servers can be overridden by extending the `setup {}` can additionally override these defaults in subsequent calls. ============================================================================== +SETUP HOOK *lspconfig-setup-hook* + +`lspconfig` will execute the `on_setup` hook for each setup call to a server after +validating its configuration, and before attempting to launch the server +itself. One typical usage is to allow ad-hoc substitution for any +configuration entry, such as `cmd`. + +> + local lspconfig = require 'lspconfig' + lspconfig.util.on_setup = lspconfig.util.add_hook_before(lspconfig.util.on_setup, function(config) + if some_condition and config.name == "clangd" then + local custom_server_prefix = "/my/custom/server/prefix" + config.cmd = { custom_server_prefix .. "/bin/clangd" } + end + end) + + +Note: This is primarily targeted at plugins developers, so make sure to use +`util.add_hook_before()` as a wrapper instead of overriding the original function +completely, to void breaking external integrations with lspconfig. + +============================================================================== SERVER CONFIGURATIONS *lspconfig-configurations* -See |lspconfig-server-configurations| by typing `K` over it for the complete -list of language servers configurations. +See |lspconfig-all| for the complete list of language server configurations. While the `setup {}` function is the primary interface to `lspconfig`, for servers for which there is not a configuration, it is necessary to define a @@ -282,35 +264,49 @@ The `configs` module is a singleton where configs are defined. The schema for validating using `vim.validate` is: > configs.SERVER_NAME = { - default_config = {'t'}; - on_new_config = {'f', true}; - on_attach = {'f', true}; - commands = {'t', true}; - docs = {'t', true}; + default_config = {'t'}, + on_new_config = {'f', true}, + on_attach = {'f', true}, + commands = {'t', true}, + docs = {'t', true}, } < where the structure of the docs table is as follows: > docs = { - description = {'s', true}; - default_config = {'t', true}; + description = {'s', true}, + default_config = {'t', true}, } < `commands` is a map of `name:definition` key:value pairs, where `definition` is a list whose first value is a function implementing the command, and the rest are either array values which will be formed into flags for the command, -or special keys like `description`. Example: +or special keys like `description`. + +Warning: Commands is deprecated and will be removed in future releases. +It is recommended to use `vim.api.nvim_create_user_command()` instead in an `on_attach` function. + +Example: > - commands = { - TexlabBuild = { - function() - buf_build(0) - end; - "-range"; - description = "Build the current buffer"; - }; - }; + local function organize_imports() + local params = { + command = 'pyright.organizeimports', + arguments = { vim.uri_from_bufnr(0) }, + } + vim.lsp.buf.execute_command(params) + end + + local on_attach = function(client, bufnr) + if client.name == "pyright" then + vim.api.nvim_create_user_command("PyrightOrganizeImports", organize_imports, {desc = 'Organize Imports'}) + end + end + + require("lspconfig")['pyright'].setup({ + on_attach = on_attach + }) < + The `configs.__newindex` metamethod consumes the config definition and returns an object with a `setup()` method, to be invoked by users: > @@ -320,40 +316,36 @@ After you set `configs.SERVER_NAME` you can add arbitrary language-specific functions to it if necessary. Example: - > configs.texlab.buf_build = buf_build < + ============================================================================== -ADDING NEW SERVERS *lspconfig-adding-servers* +ADDING NEW SERVERS *lspconfig-new* -The three steps for adding and enabling a new server configuration are: +The steps for adding and enabling a new server configuration are: -- load the `lspconfig` module (note that this is a stylistic choice) -> +1. load the `lspconfig` module (note that this is a stylistic choice) > local lspconfig = require 'lspconfig' < -- define the configuration - -> +2. define the configuration > local configs = require 'lspconfig.configs' -- Check if the config is already defined (useful when reloading this file) if not configs.foo_lsp then configs.foo_lsp = { default_config = { - cmd = {'/home/neovim/lua-language-server/run.sh'}; - filetypes = {'lua'}; + cmd = {'/home/neovim/lua-language-server/run.sh'}, + filetypes = {'lua'}, root_dir = function(fname) return lspconfig.util.find_git_ancestor(fname) - end; - settings = {}; - }; + end, + settings = {}, + }, } end -- call `setup()` to enable the FileType autocmd -> +3. call `setup()` to enable the FileType autocmd > lspconfig.foo_lsp.setup{} < ============================================================================== @@ -378,8 +370,9 @@ below returns a function that takes as its argument the current buffer path. - `util.root_pattern`: function which takes multiple arguments, each corresponding to a different root pattern against which the contents of the - current directory are matched using |vim.fin.glob()| while traversing up the - filesystem. + current directory are matched using |vim.fn.glob()| while traversing up the + filesystem. Parent directories are traversed once per pattern, in the order + the patterns are specified. > root_dir = util.root_pattern('pyproject.toml', 'requirements.txt') < @@ -397,7 +390,7 @@ below returns a function that takes as its argument the current buffer path. - `util.find_package_json_ancestor`: a function that locates the first parent directory containing a `package.json`. > - root_dir = util.find_json_ancestor + root_dir = util.find_package_json_ancestor < Note: On Windows, `lspconfig` always assumes forward slash normalized paths with capitalized drive letters. @@ -450,6 +443,8 @@ mode under which cross-file features may be degraded. `workspaceFolders` during initialization. - attaching subsequent files in the parent directory to the same server instance, depending on filetype. +- also supports unnamed buffer if filetype matches the server filetype + settings. Cross-file features (navigation, hover) may or may not work depending on the language server. For a full feature-set, consider moving your files to a @@ -473,7 +468,8 @@ contained in `:LspInfo`: if it successfully resolves a root directory. Note: Defaults to all configured servers matching the current buffer filetype. - `:LspStop <client_id>` stops the server with the given client id. Defaults to - stopping all servers active on the current buffer. + stopping all servers active on the current buffer. if you want to force stop + a language server you can do it like `:LspStop <client_id> ++force` - `:LspRestart <client_id>` restarts the client with the given client id, and will attempt to reattach to all previously attached buffers. @@ -481,67 +477,69 @@ contained in `:LspInfo`: EXAMPLE KEYBINDINGS *lspconfig-keybindings* `lspconfig`, and the core client, do not map any keybindings by default. The -following is an example Lua block which demonstrates how to leverage -`on-attach` to selectively apply keybindings after a language servers has -attached to a given buffer. +following is an example Lua block which demonstrates how to leverage the +`LspAttach` (Nvim 0.8+) autocommand to apply keybindings after a language +server has attached to a given buffer. > -> - -- Mappings. + -- Setup language servers. + local lspconfig = require('lspconfig') + lspconfig.pyright.setup {} + lspconfig.tsserver.setup {} + lspconfig.rust_analyzer.setup { + -- Server-specific settings. See `:help lspconfig-setup` + settings = { + ['rust-analyzer'] = {}, + }, + } + + + -- Global mappings. -- See `:help vim.diagnostic.*` for documentation on any of the below functions - local opts = { noremap=true, silent=true } - vim.api.nvim_set_keymap('n', '<space>e', '<cmd>lua vim.diagnostic.open_float()<CR>', opts) - vim.api.nvim_set_keymap('n', '[d', '<cmd>lua vim.diagnostic.goto_prev()<CR>', opts) - vim.api.nvim_set_keymap('n', ']d', '<cmd>lua vim.diagnostic.goto_next()<CR>', opts) - vim.api.nvim_set_keymap('n', '<space>q', '<cmd>lua vim.diagnostic.setloclist()<CR>', opts) + vim.keymap.set('n', '<space>e', vim.diagnostic.open_float) + vim.keymap.set('n', '[d', vim.diagnostic.goto_prev) + vim.keymap.set('n', ']d', vim.diagnostic.goto_next) + vim.keymap.set('n', '<space>q', vim.diagnostic.setloclist) - -- Use an on_attach function to only map the following keys + -- Use LspAttach autocommand to only map the following keys -- after the language server attaches to the current buffer - local on_attach = function(client, bufnr) - -- Enable completion triggered by <c-x><c-o> - vim.api.nvim_buf_set_option(bufnr, 'omnifunc', 'v:lua.vim.lsp.omnifunc') - - -- Mappings. - -- See `:help vim.lsp.*` for documentation on any of the below functions - vim.api.nvim_buf_set_keymap(bufnr, 'n', 'gD', '<cmd>lua vim.lsp.buf.declaration()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', 'gd', '<cmd>lua vim.lsp.buf.definition()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', 'K', '<cmd>lua vim.lsp.buf.hover()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', 'gi', '<cmd>lua vim.lsp.buf.implementation()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', '<C-k>', '<cmd>lua vim.lsp.buf.signature_help()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>wa', '<cmd>lua vim.lsp.buf.add_workspace_folder()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>wr', '<cmd>lua vim.lsp.buf.remove_workspace_folder()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>wl', '<cmd>lua print(vim.inspect(vim.lsp.buf.list_workspace_folders()))<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>D', '<cmd>lua vim.lsp.buf.type_definition()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>rn', '<cmd>lua vim.lsp.buf.rename()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>ca', '<cmd>lua vim.lsp.buf.code_action()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', 'gr', '<cmd>lua vim.lsp.buf.references()<CR>', opts) - vim.api.nvim_buf_set_keymap(bufnr, 'n', '<space>f', '<cmd>lua vim.lsp.buf.formatting()<CR>', opts) - end - - -- Use a loop to conveniently call 'setup' on multiple servers and - -- map buffer local keybindings when the language server attaches - local servers = { 'pyright', 'rust_analyzer', 'tsserver' } - for _, lsp in pairs(servers) do - require('lspconfig')[lsp].setup { - on_attach = on_attach, - flags = { - -- This will be the default in neovim 0.7+ - debounce_text_changes = 150, - } - } - end -< -Note: these keymappings are meant for illustration and override some -infrequently used default mappings. + vim.api.nvim_create_autocmd('LspAttach', { + group = vim.api.nvim_create_augroup('UserLspConfig', {}), + callback = function(ev) + -- Enable completion triggered by <c-x><c-o> + vim.bo[ev.buf].omnifunc = 'v:lua.vim.lsp.omnifunc' + + -- Buffer local mappings. + -- See `:help vim.lsp.*` for documentation on any of the below functions + local opts = { buffer = ev.buf } + vim.keymap.set('n', 'gD', vim.lsp.buf.declaration, opts) + vim.keymap.set('n', 'gd', vim.lsp.buf.definition, opts) + vim.keymap.set('n', 'K', vim.lsp.buf.hover, opts) + vim.keymap.set('n', 'gi', vim.lsp.buf.implementation, opts) + vim.keymap.set('n', '<C-k>', vim.lsp.buf.signature_help, opts) + vim.keymap.set('n', '<space>wa', vim.lsp.buf.add_workspace_folder, opts) + vim.keymap.set('n', '<space>wr', vim.lsp.buf.remove_workspace_folder, opts) + vim.keymap.set('n', '<space>wl', function() + print(vim.inspect(vim.lsp.buf.list_workspace_folders())) + end, opts) + vim.keymap.set('n', '<space>D', vim.lsp.buf.type_definition, opts) + vim.keymap.set('n', '<space>rn', vim.lsp.buf.rename, opts) + vim.keymap.set({ 'n', 'v' }, '<space>ca', vim.lsp.buf.code_action, opts) + vim.keymap.set('n', 'gr', vim.lsp.buf.references, opts) + vim.keymap.set('n', '<space>f', function() + vim.lsp.buf.format { async = true } + end, opts) + end, + }) ============================================================================== COMPLETION SUPPORT *lspconfig-completion* Manually triggered completion can be provided by Nvim's built-in omnifunc. -See `:help omnifunc` for more details. +See |lspconfig|. -For autocompletion, Nvim does not offer built-in functionality at this time. -Consult the `lspconfig` wiki, which provides configuration examples for using a -completion plugin with the built-in client +For autocompletion, Nvim does not provide built-in functionality. Consult the +nvim-lspconfig wiki, which provides configuration examples for using +a completion plugin with the built-in client ============================================================================== DEBUGGING *lspconfig-debugging* @@ -554,17 +552,17 @@ is typically (in rough order): - a plugin - overrides in a user configuration - the built-in client in Nvim core -- `lspconfig` +- nvim-lspconfig The first step in debugging is to test with a minimal configuration (such as `../test/minimal_init.lua`). Historically, many users problems are due to plugins or misconfiguration. Should that fail, identifying which component is the culprit is challenging. -The following are the only categories of bugs that pertain to `lspconfig`. +The following are the only categories of bugs that pertain to nvim-lspconfig. - The root directory inferred for your project is wrong, or it should be - detected but is not due to a bug in the `lspconfig` path utilities. + detected but is not due to a bug in the nvim-lspconfig path utilities. - The server is launching, but you believe that the default settings, initialization options, or command arguments are suboptimal and should be replaced based on your understanding of the server documentation. @@ -574,14 +572,14 @@ tracker. All bugs pertaining to plugins should be reported to the respective plugin. All missing features in a language server should be reported to the upstream language server issue tracker. -For debugging `lspconfig` issues, the most common hurdles users face are: +For debugging nvim-lspconfig issues, the most common hurdles users face are: - The language server is not installed or is otherwise not executable. - `lspconfig` does not install language servers for you. Ensure the `cmd` + nvim-lspconfig does not install language servers for you. Ensure the `cmd` defined in `server_configurations.md` is executable from the command line. If the absolute path to the binary is not supplied in `cmd`, ensure it is on your PATH. - - No root detected. `lspconfig` is built around the concept of projects. See + - No root detected. nvim-lspconfig is built around the concept of projects. See |lspconfig-root-detection| for more details. Most of the time, initializing a git repo will suffice. - Misconfiguration. Often users will override `cmd`, `on_init`, or @@ -608,7 +606,7 @@ the built-in client, specifically considering the RPC logs. Example: Attempt to run the language server, and open the log with: > - :lua vim.cmd('e'..vim.lsp.get_log_path()) + :LspLog < Note that `ERROR` messages containing `stderr` only indicate that the log was sent to `stderr`. Many servers counter-intuitively send harmless messages @@ -632,5 +630,17 @@ the built-in client to provide functionality tailored to specific language servers. ============================================================================== +Highlights *lspconfig-highlight* + +LspInfoTitle Client name +LspInfoList Server name list +LspInfoFiletype `filetypes` area +LspInfoTip Tip +LspInfoBorder Window border + To set the border use: > + require('lspconfig.ui.windows').default_options.border = 'single' +< Accepts the same values as the `border` option to |nvim_open_win()| + +============================================================================== vim:tw=78:ts=8:ft=help:norl: diff --git a/start/lspconfig-0.1.8/doc/server_configurations.md b/start/lspconfig-0.1.8/doc/server_configurations.md new file mode 100644 index 0000000..45946af --- /dev/null +++ b/start/lspconfig-0.1.8/doc/server_configurations.md @@ -0,0 +1,13815 @@ +# Configurations +<!-- *lspconfig-all* *lspconfig-server-configurations* --> + +LSP configs provided by nvim-lspconfig are listed below. This documentation is +autogenerated from the Lua files. You can view this file in Nvim by running +`:help lspconfig-all`. + +- [agda_ls](#agda_ls) +- [aiken](#aiken) +- [als](#als) +- [anakin_language_server](#anakin_language_server) +- [angularls](#angularls) +- [ansiblels](#ansiblels) +- [antlersls](#antlersls) +- [apex_ls](#apex_ls) +- [arduino_language_server](#arduino_language_server) +- [asm_lsp](#asm_lsp) +- [ast_grep](#ast_grep) +- [astro](#astro) +- [autotools_ls](#autotools_ls) +- [awk_ls](#awk_ls) +- [azure_pipelines_ls](#azure_pipelines_ls) +- [basedpyright](#basedpyright) +- [bashls](#bashls) +- [beancount](#beancount) +- [bicep](#bicep) +- [biome](#biome) +- [bitbake_language_server](#bitbake_language_server) +- [blueprint_ls](#blueprint_ls) +- [bqnlsp](#bqnlsp) +- [bright_script](#bright_script) +- [bsl_ls](#bsl_ls) +- [buck2](#buck2) +- [buddy_ls](#buddy_ls) +- [bufls](#bufls) +- [bzl](#bzl) +- [cadence](#cadence) +- [cairo_ls](#cairo_ls) +- [ccls](#ccls) +- [cds_lsp](#cds_lsp) +- [circom-lsp](#circom-lsp) +- [clangd](#clangd) +- [clarity_lsp](#clarity_lsp) +- [clojure_lsp](#clojure_lsp) +- [cmake](#cmake) +- [cobol_ls](#cobol_ls) +- [codeqlls](#codeqlls) +- [coffeesense](#coffeesense) +- [contextive](#contextive) +- [coq_lsp](#coq_lsp) +- [crystalline](#crystalline) +- [csharp_ls](#csharp_ls) +- [css_variables](#css_variables) +- [cssls](#cssls) +- [cssmodules_ls](#cssmodules_ls) +- [cucumber_language_server](#cucumber_language_server) +- [custom_elements_ls](#custom_elements_ls) +- [cypher_ls](#cypher_ls) +- [dafny](#dafny) +- [dagger](#dagger) +- [dartls](#dartls) +- [dcmls](#dcmls) +- [debputy](#debputy) +- [delphi_ls](#delphi_ls) +- [denols](#denols) +- [dhall_lsp_server](#dhall_lsp_server) +- [diagnosticls](#diagnosticls) +- [digestif](#digestif) +- [docker_compose_language_service](#docker_compose_language_service) +- [dockerls](#dockerls) +- [dolmenls](#dolmenls) +- [dotls](#dotls) +- [dprint](#dprint) +- [drools_lsp](#drools_lsp) +- [ds_pinyin_lsp](#ds_pinyin_lsp) +- [earthlyls](#earthlyls) +- [ecsact](#ecsact) +- [efm](#efm) +- [elixirls](#elixirls) +- [elmls](#elmls) +- [elp](#elp) +- [ember](#ember) +- [emmet_language_server](#emmet_language_server) +- [emmet_ls](#emmet_ls) +- [erg_language_server](#erg_language_server) +- [erlangls](#erlangls) +- [esbonio](#esbonio) +- [eslint](#eslint) +- [facility_language_server](#facility_language_server) +- [fennel_language_server](#fennel_language_server) +- [fennel_ls](#fennel_ls) +- [flow](#flow) +- [flux_lsp](#flux_lsp) +- [foam_ls](#foam_ls) +- [fortls](#fortls) +- [fsautocomplete](#fsautocomplete) +- [fsharp_language_server](#fsharp_language_server) +- [fstar](#fstar) +- [futhark_lsp](#futhark_lsp) +- [gdscript](#gdscript) +- [gdshader_lsp](#gdshader_lsp) +- [ghcide](#ghcide) +- [ghdl_ls](#ghdl_ls) +- [ginko_ls](#ginko_ls) +- [gitlab_ci_ls](#gitlab_ci_ls) +- [gleam](#gleam) +- [glint](#glint) +- [glsl_analyzer](#glsl_analyzer) +- [glslls](#glslls) +- [golangci_lint_ls](#golangci_lint_ls) +- [gopls](#gopls) +- [gradle_ls](#gradle_ls) +- [grammarly](#grammarly) +- [graphql](#graphql) +- [groovyls](#groovyls) +- [guile_ls](#guile_ls) +- [harper_ls](#harper_ls) +- [haxe_language_server](#haxe_language_server) +- [hdl_checker](#hdl_checker) +- [helm_ls](#helm_ls) +- [hhvm](#hhvm) +- [hie](#hie) +- [hlasm](#hlasm) +- [hls](#hls) +- [hoon_ls](#hoon_ls) +- [html](#html) +- [htmx](#htmx) +- [hydra_lsp](#hydra_lsp) +- [hyprls](#hyprls) +- [idris2_lsp](#idris2_lsp) +- [intelephense](#intelephense) +- [java_language_server](#java_language_server) +- [jdtls](#jdtls) +- [jedi_language_server](#jedi_language_server) +- [jinja_lsp](#jinja_lsp) +- [jqls](#jqls) +- [jsonls](#jsonls) +- [jsonnet_ls](#jsonnet_ls) +- [julials](#julials) +- [koka](#koka) +- [kotlin_language_server](#kotlin_language_server) +- [lean3ls](#lean3ls) +- [leanls](#leanls) +- [lelwel_ls](#lelwel_ls) +- [lemminx](#lemminx) +- [lexical](#lexical) +- [ltex](#ltex) +- [lua_ls](#lua_ls) +- [luau_lsp](#luau_lsp) +- [lwc_ls](#lwc_ls) +- [m68k](#m68k) +- [markdown_oxide](#markdown_oxide) +- [marksman](#marksman) +- [matlab_ls](#matlab_ls) +- [mdx_analyzer](#mdx_analyzer) +- [mesonlsp](#mesonlsp) +- [metals](#metals) +- [millet](#millet) +- [mint](#mint) +- [mlir_lsp_server](#mlir_lsp_server) +- [mlir_pdll_lsp_server](#mlir_pdll_lsp_server) +- [mm0_ls](#mm0_ls) +- [mojo](#mojo) +- [motoko_lsp](#motoko_lsp) +- [move_analyzer](#move_analyzer) +- [mutt_ls](#mutt_ls) +- [nelua_lsp](#nelua_lsp) +- [neocmake](#neocmake) +- [nextls](#nextls) +- [nginx_language_server](#nginx_language_server) +- [nickel_ls](#nickel_ls) +- [nil_ls](#nil_ls) +- [nim_langserver](#nim_langserver) +- [nimls](#nimls) +- [nixd](#nixd) +- [nomad_lsp](#nomad_lsp) +- [ntt](#ntt) +- [nushell](#nushell) +- [nxls](#nxls) +- [ocamlls](#ocamlls) +- [ocamllsp](#ocamllsp) +- [ols](#ols) +- [omnisharp](#omnisharp) +- [opencl_ls](#opencl_ls) +- [openedge_ls](#openedge_ls) +- [openscad_ls](#openscad_ls) +- [openscad_lsp](#openscad_lsp) +- [pact_ls](#pact_ls) +- [pasls](#pasls) +- [pbls](#pbls) +- [perlls](#perlls) +- [perlnavigator](#perlnavigator) +- [perlpls](#perlpls) +- [pest_ls](#pest_ls) +- [phan](#phan) +- [phpactor](#phpactor) +- [pico8_ls](#pico8_ls) +- [pkgbuild_language_server](#pkgbuild_language_server) +- [please](#please) +- [postgres_lsp](#postgres_lsp) +- [powershell_es](#powershell_es) +- [prismals](#prismals) +- [prolog_ls](#prolog_ls) +- [prosemd_lsp](#prosemd_lsp) +- [psalm](#psalm) +- [puppet](#puppet) +- [purescriptls](#purescriptls) +- [pylsp](#pylsp) +- [pylyzer](#pylyzer) +- [pyre](#pyre) +- [pyright](#pyright) +- [qml_lsp](#qml_lsp) +- [qmlls](#qmlls) +- [quick_lint_js](#quick_lint_js) +- [r_language_server](#r_language_server) +- [racket_langserver](#racket_langserver) +- [raku_navigator](#raku_navigator) +- [reason_ls](#reason_ls) +- [regal](#regal) +- [regols](#regols) +- [relay_lsp](#relay_lsp) +- [remark_ls](#remark_ls) +- [rescriptls](#rescriptls) +- [rls](#rls) +- [rnix](#rnix) +- [robotframework_ls](#robotframework_ls) +- [roc_ls](#roc_ls) +- [rome](#rome) +- [rubocop](#rubocop) +- [ruby_lsp](#ruby_lsp) +- [ruff](#ruff) +- [ruff_lsp](#ruff_lsp) +- [rune_languageserver](#rune_languageserver) +- [rust_analyzer](#rust_analyzer) +- [salt_ls](#salt_ls) +- [scheme_langserver](#scheme_langserver) +- [scry](#scry) +- [serve_d](#serve_d) +- [shopify_theme_ls](#shopify_theme_ls) +- [sixtyfps](#sixtyfps) +- [slangd](#slangd) +- [slint_lsp](#slint_lsp) +- [smarty_ls](#smarty_ls) +- [smithy_ls](#smithy_ls) +- [snyk_ls](#snyk_ls) +- [solang](#solang) +- [solargraph](#solargraph) +- [solc](#solc) +- [solidity](#solidity) +- [solidity_ls](#solidity_ls) +- [solidity_ls_nomicfoundation](#solidity_ls_nomicfoundation) +- [somesass_ls](#somesass_ls) +- [sorbet](#sorbet) +- [sourcekit](#sourcekit) +- [sourcery](#sourcery) +- [spectral](#spectral) +- [spyglassmc_language_server](#spyglassmc_language_server) +- [sqlls](#sqlls) +- [sqls](#sqls) +- [standardrb](#standardrb) +- [starlark_rust](#starlark_rust) +- [starpls](#starpls) +- [statix](#statix) +- [steep](#steep) +- [stimulus_ls](#stimulus_ls) +- [stylelint_lsp](#stylelint_lsp) +- [svelte](#svelte) +- [svlangserver](#svlangserver) +- [svls](#svls) +- [swift_mesonls](#swift_mesonls) +- [syntax_tree](#syntax_tree) +- [tabby_ml](#tabby_ml) +- [tailwindcss](#tailwindcss) +- [taplo](#taplo) +- [tblgen_lsp_server](#tblgen_lsp_server) +- [teal_ls](#teal_ls) +- [templ](#templ) +- [terraform_lsp](#terraform_lsp) +- [terraformls](#terraformls) +- [texlab](#texlab) +- [textlsp](#textlsp) +- [tflint](#tflint) +- [theme_check](#theme_check) +- [thriftls](#thriftls) +- [tilt_ls](#tilt_ls) +- [tinymist](#tinymist) +- [tsp_server](#tsp_server) +- [tsserver](#tsserver) +- [ttags](#ttags) +- [turtle_ls](#turtle_ls) +- [twiggy_language_server](#twiggy_language_server) +- [typeprof](#typeprof) +- [typos_lsp](#typos_lsp) +- [typst_lsp](#typst_lsp) +- [uiua](#uiua) +- [unison](#unison) +- [unocss](#unocss) +- [uvls](#uvls) +- [v_analyzer](#v_analyzer) +- [vacuum](#vacuum) +- [vala_ls](#vala_ls) +- [vale_ls](#vale_ls) +- [vdmj](#vdmj) +- [verible](#verible) +- [veridian](#veridian) +- [veryl_ls](#veryl_ls) +- [vhdl_ls](#vhdl_ls) +- [vimls](#vimls) +- [visualforce_ls](#visualforce_ls) +- [vls](#vls) +- [volar](#volar) +- [vtsls](#vtsls) +- [vuels](#vuels) +- [wgsl_analyzer](#wgsl_analyzer) +- [yamlls](#yamlls) +- [yang_lsp](#yang_lsp) +- [yls](#yls) +- [zk](#zk) +- [zls](#zls) + +## agda_ls + +https://github.com/agda/agda-language-server + +Language Server for Agda. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.agda_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "als" } + ``` + - `filetypes` : + ```lua + { "agda" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## aiken + +https://github.com/aiken-lang/aiken + +A language server for Aiken Programming Language. +[Installation](https://aiken-lang.org/installation-instructions) + +It can be i + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.aiken.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "aiken", "lsp" } + ``` + - `filetypes` : + ```lua + { "aiken" } + ``` + - `root_dir` : + ```lua + root_pattern("aiken.toml", ".git") + ``` + + +## als + +https://github.com/AdaCore/ada_language_server + +Installation instructions can be found [here](https://github.com/AdaCore/ada_language_server#Install). + +Can be configured by passing a "settings" object to `als.setup{}`: + +```lua +require('lspconfig').als.setup{ + settings = { + ada = { + projectFile = "project.gpr"; + scenarioVariables = { ... }; + } + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.als.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ada_language_server" } + ``` + - `filetypes` : + ```lua + { "ada" } + ``` + - `root_dir` : + ```lua + util.root_pattern("Makefile", ".git", "*.gpr", "*.adc") + ``` + + +## anakin_language_server + +https://pypi.org/project/anakin-language-server/ + +`anakin-language-server` is yet another Jedi Python language server. + +Available options: + +* Initialization: https://github.com/muffinmad/anakin-language-server#initialization-option +* Configuration: https://github.com/muffinmad/anakin-language-server#configuration-options + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.anakin_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "anakinls" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + anakinls = { + pyflakes_errors = { "ImportStarNotPermitted", "UndefinedExport", "UndefinedLocal", "UndefinedName", "DuplicateArgument", "MultiValueRepeatedKeyLiteral", "MultiValueRepeatedKeyVariable", "FutureFeatureNotDefined", "LateFutureImport", "ReturnOutsideFunction", "YieldOutsideFunction", "ContinueOutsideLoop", "BreakOutsideLoop", "TwoStarredExpressions", "TooManyExpressionsInStarredAssignment", "ForwardAnnotationSyntaxError", "RaiseNotImplemented", "StringDotFormatExtraPositionalArguments", "StringDotFormatExtraNamedArguments", "StringDotFormatMissingArgument", "StringDotFormatMixingAutomatic", "StringDotFormatInvalidFormat", "PercentFormatInvalidFormat", "PercentFormatMixedPositionalAndNamed", "PercentFormatUnsupportedFormat", "PercentFormatPositionalCountMismatch", "PercentFormatExtraNamedArguments", "PercentFormatMissingArgument", "PercentFormatExpectedMapping", "PercentFormatExpectedSequence", "PercentFormatStarRequiresSequence" } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## angularls + +https://github.com/angular/vscode-ng-language-service + +`angular-language-server` can be installed via npm `npm install -g @angular/language-server`. + +Note, that if you override the default `cmd`, you must also update `on_new_config` to set `new_config.cmd` during startup. + +```lua +local project_library_path = "/path/to/project/lib" +local cmd = {"ngserver", "--stdio", "--tsProbeLocations", project_library_path , "--ngProbeLocations", project_library_path} + +require'lspconfig'.angularls.setup{ + cmd = cmd, + on_new_config = function(new_config,new_root_dir) + new_config.cmd = cmd + end, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.angularls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ngserver", "--stdio", "--tsProbeLocations", "", "--ngProbeLocations", "" } + ``` + - `filetypes` : + ```lua + { "typescript", "html", "typescriptreact", "typescript.tsx" } + ``` + - `root_dir` : + ```lua + root_pattern("angular.json") + ``` + + +## ansiblels + +https://github.com/ansible/vscode-ansible + +Language server for the ansible configuration management tool. + +`ansible-language-server` can be installed via `npm`: + +```sh +npm install -g @ansible/ansible-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ansiblels.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ansible-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "yaml.ansible" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + ansible = { + ansible = { + path = "ansible" + }, + executionEnvironment = { + enabled = false + }, + python = { + interpreterPath = "python" + }, + validation = { + enabled = true, + lint = { + enabled = true, + path = "ansible-lint" + } + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## antlersls + +https://www.npmjs.com/package/antlers-language-server + +`antlersls` can be installed via `npm`: +```sh +npm install -g antlers-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.antlersls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "antlersls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "html", "antlers" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## apex_ls + +https://github.com/forcedotcom/salesforcedx-vscode + +Language server for Apex. + +For manual installation, download the JAR file from the [VSCode +extension](https://github.com/forcedotcom/salesforcedx-vscode/tree/develop/packages/salesforcedx-vscode-apex). + +```lua +require'lspconfig'.apex_ls.setup { + apex_jar_path = '/path/to/apex-jorje-lsp.jar', + apex_enable_semantic_errors = false, -- Whether to allow Apex Language Server to surface semantic errors + apex_enable_completion_statistics = false, -- Whether to allow Apex Language Server to collect telemetry on code completion usage +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.apex_ls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "apexcode" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern('sfdx-project.json') + ``` + + +## arduino_language_server + +https://github.com/arduino/arduino-language-server + +Language server for Arduino + +The `arduino-language-server` can be installed by running: + +``` +go install github.com/arduino/arduino-language-server@latest +``` + +The `arduino-cli` tool must also be installed. Follow [these +installation instructions](https://arduino.github.io/arduino-cli/latest/installation/) for +your platform. + +After installing `arduino-cli`, follow [these +instructions](https://arduino.github.io/arduino-cli/latest/getting-started/#create-a-configuration-file) +for generating a configuration file if you haven't done so already, and make +sure you [install any relevant platforms +libraries](https://arduino.github.io/arduino-cli/latest/getting-started/#install-the-core-for-your-board). + +The language server also requires `clangd` to be installed. Follow [these +installation instructions](https://clangd.llvm.org/installation) for your +platform. + +If you don't have a sketch yet create one. + +```sh +$ arduino-cli sketch new test +$ cd test +``` + +You will need a `sketch.yaml` file in order for the language server to understand your project. It will also save you passing options to `arduino-cli` each time you compile or upload a file. You can generate the file like using the following commands. + + +First gather some information about your board. Make sure your board is connected and run the following: + +```sh +$ arduino-cli board list +Port Protocol Type Board Name FQBN Core +/dev/ttyACM0 serial Serial Port (USB) Arduino Uno arduino:avr:uno arduino:avr +``` + +Then generate the file: + +```sh +arduino-cli board attach -p /dev/ttyACM0 -b arduino:avr:uno test.ino +``` + +The resulting file should like like this: + +```yaml +default_fqbn: arduino:avr:uno +default_port: /dev/ttyACM0 +``` + +Your folder structure should look like this: + +``` +. +├── test.ino +└── sketch.yaml +``` + +For further instruction about configuration options, run `arduino-language-server --help`. + +Note that an upstream bug makes keywords in some cases become undefined by the language server. +Ref: https://github.com/arduino/arduino-ide/issues/159 + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.arduino_language_server.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + { + general = { + positionEncodings = { "utf-16" } + }, + textDocument = { + callHierarchy = { + dynamicRegistration = false + }, + codeAction = { + codeActionLiteralSupport = { + codeActionKind = { + valueSet = { "", "quickfix", "refactor", "refactor.extract", "refactor.inline", "refactor.rewrite", "source", "source.organizeImports" } + } + }, + dataSupport = true, + dynamicRegistration = true, + isPreferredSupport = true, + resolveSupport = { + properties = { "edit" } + } + }, + completion = { + completionItem = { + commitCharactersSupport = false, + deprecatedSupport = false, + documentationFormat = { "markdown", "plaintext" }, + preselectSupport = false, + snippetSupport = false + }, + completionItemKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 } + }, + completionList = { + itemDefaults = { "editRange", "insertTextFormat", "insertTextMode", "data" } + }, + contextSupport = false, + dynamicRegistration = false + }, + declaration = { + linkSupport = true + }, + definition = { + dynamicRegistration = true, + linkSupport = true + }, + diagnostic = { + dynamicRegistration = false + }, + documentHighlight = { + dynamicRegistration = false + }, + documentSymbol = { + dynamicRegistration = false, + hierarchicalDocumentSymbolSupport = true, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + formatting = { + dynamicRegistration = true + }, + hover = { + contentFormat = { "markdown", "plaintext" }, + dynamicRegistration = true + }, + implementation = { + linkSupport = true + }, + inlayHint = { + dynamicRegistration = true, + resolveSupport = { + properties = { "textEdits", "tooltip", "location", "command" } + } + }, + publishDiagnostics = { + dataSupport = true, + relatedInformation = true, + tagSupport = { + valueSet = { 1, 2 } + } + }, + rangeFormatting = { + dynamicRegistration = true + }, + references = { + dynamicRegistration = false + }, + rename = { + dynamicRegistration = true, + prepareSupport = true + }, + semanticTokens = vim.NIL, + signatureHelp = { + dynamicRegistration = false, + signatureInformation = { + activeParameterSupport = true, + documentationFormat = { "markdown", "plaintext" }, + parameterInformation = { + labelOffsetSupport = true + } + } + }, + synchronization = { + didSave = true, + dynamicRegistration = false, + willSave = true, + willSaveWaitUntil = true + }, + typeDefinition = { + linkSupport = true + } + }, + window = { + showDocument = { + support = true + }, + showMessage = { + messageActionItem = { + additionalPropertiesSupport = false + } + }, + workDoneProgress = true + }, + workspace = { + applyEdit = true, + configuration = true, + didChangeConfiguration = { + dynamicRegistration = false + }, + didChangeWatchedFiles = { + dynamicRegistration = false, + relativePatternSupport = true + }, + inlayHint = { + refreshSupport = true + }, + semanticTokens = vim.NIL, + symbol = { + dynamicRegistration = false, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + workspaceEdit = { + resourceOperations = { "rename", "create", "delete" } + }, + workspaceFolders = true + } + } + ``` + - `cmd` : + ```lua + { "arduino-language-server" } + ``` + - `filetypes` : + ```lua + { "arduino" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## asm_lsp + +https://github.com/bergercookie/asm-lsp + +Language Server for GAS/GO Assembly + +`asm-lsp` can be installed via cargo: +cargo install asm-lsp + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.asm_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "asm-lsp" } + ``` + - `filetypes` : + ```lua + { "asm", "vmasm" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## ast_grep + +https://ast-grep.github.io/ + +ast-grep(sg) is a fast and polyglot tool for code structural search, lint, rewriting at large scale. +ast-grep LSP only works in projects that have `sgconfig.y[a]ml` in their root directories. +```sh +npm install [-g] @ast-grep/cli +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ast_grep.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ast-grep", "lsp" } + ``` + - `filetypes` : + ```lua + { "c", "cpp", "rust", "go", "java", "python", "javascript", "typescript", "html", "css", "kotlin", "dart", "lua" } + ``` + - `root_dir` : + ```lua + root_pattern('sgconfig.yaml', 'sgconfig.yml') + ``` + + +## astro + +https://github.com/withastro/language-tools/tree/main/packages/language-server + +`astro-ls` can be installed via `npm`: +```sh +npm install -g @astrojs/language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.astro.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "astro-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "astro" } + ``` + - `init_options` : + ```lua + { + typescript = {} + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git") + ``` + + +## autotools_ls + +https://github.com/Freed-Wu/autotools-language-server + +`autotools-language-server` can be installed via `pip`: +```sh +pip install autotools-language-server +``` + +Language server for autoconf, automake and make using tree sitter in python. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.autotools_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "autotools-language-server" } + ``` + - `filetypes` : + ```lua + { "config", "automake", "make" } + ``` + - `root_dir` : + ```lua + { "configure.ac", "Makefile", "Makefile.am", "*.mk" } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## awk_ls + +https://github.com/Beaglefoot/awk-language-server/ + +`awk-language-server` can be installed via `npm`: +```sh +npm install -g awk-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.awk_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "awk-language-server" } + ``` + - `filetypes` : + ```lua + { "awk" } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## azure_pipelines_ls + +https://github.com/microsoft/azure-pipelines-language-server + +An Azure Pipelines language server + +`azure-pipelines-ls` can be installed via `npm`: + +```sh +npm install -g azure-pipelines-language-server +``` + +By default `azure-pipelines-ls` will only work in files named `azure-pipelines.yml`, this can be changed by providing additional settings like so: +```lua +require("lspconfig").azure_pipelines_ls.setup { + ... -- other configuration for setup {} + settings = { + yaml = { + schemas = { + ["https://raw.githubusercontent.com/microsoft/azure-pipelines-vscode/master/service-schema.json"] = { + "/azure-pipeline*.y*l", + "/*.azure*", + "Azure-Pipelines/**/*.y*l", + "Pipelines/*.y*l", + }, + }, + }, + }, +} +``` +The Azure Pipelines LSP is a fork of `yaml-language-server` and as such the same settings can be passed to it as `yaml-language-server`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.azure_pipelines_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "azure-pipelines-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "yaml" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## basedpyright + +https://detachhead.github.io/basedpyright + +`basedpyright`, a static type checker and language server for python + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.basedpyright.setup{} +``` +**Commands:** +- PyrightOrganizeImports: Organize Imports +- PyrightSetPythonPath: Reconfigure basedpyright with the provided python path + +**Default values:** + - `cmd` : + ```lua + { "basedpyright-langserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + basedpyright = { + analysis = { + autoSearchPaths = true, + diagnosticMode = "openFilesOnly", + useLibraryCodeForTypes = true + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bashls + +https://github.com/bash-lsp/bash-language-server + +`bash-language-server` can be installed via `npm`: +```sh +npm i -g bash-language-server +``` + +Language server for bash, written using tree sitter in typescript. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bashls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bash-language-server", "start" } + ``` + - `filetypes` : + ```lua + { "sh" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `settings` : + ```lua + { + bashIde = { + globPattern = "*@(.sh|.inc|.bash|.command)" + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## beancount + +https://github.com/polarmutex/beancount-language-server#installation + +See https://github.com/polarmutex/beancount-language-server#configuration for configuration options + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.beancount.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "beancount-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "beancount", "bean" } + ``` + - `init_options` : + ```lua + {} + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bicep + +https://github.com/azure/bicep +Bicep language server + +Bicep language server can be installed by downloading and extracting a release of bicep-langserver.zip from [Bicep GitHub releases](https://github.com/Azure/bicep/releases). + +Bicep language server requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. + +Neovim does not have built-in support for the bicep filetype which is required for lspconfig to automatically launch the language server. + +Filetype detection can be added via an autocmd: +```lua +vim.cmd [[ autocmd BufNewFile,BufRead *.bicep set filetype=bicep ]] +``` + +**By default, bicep language server does not have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. + +```lua +local bicep_lsp_bin = "/path/to/bicep-langserver/Bicep.LangServer.dll" +require'lspconfig'.bicep.setup{ + cmd = { "dotnet", bicep_lsp_bin }; + ... +} +``` + +To download the latest release and place in /usr/local/bin/bicep-langserver: +```bash +(cd $(mktemp -d) \ + && curl -fLO https://github.com/Azure/bicep/releases/latest/download/bicep-langserver.zip \ + && rm -rf /usr/local/bin/bicep-langserver \ + && unzip -d /usr/local/bin/bicep-langserver bicep-langserver.zip) +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bicep.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "bicep" } + ``` + - `init_options` : + ```lua + {} + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## biome + +https://biomejs.dev + +Toolchain of the web. [Successor of Rome](https://biomejs.dev/blog/annoucing-biome). + +```sh +npm install [-g] @biomejs/biome +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.biome.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "biome", "lsp-proxy" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "json", "jsonc", "typescript", "typescript.tsx", "typescriptreact", "astro", "svelte", "vue" } + ``` + - `root_dir` : + ```lua + root_pattern('biome.json', 'biome.jsonc') + ``` + - `single_file_support` : + ```lua + false + ``` + + +## bitbake_language_server + +🛠️ bitbake language server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bitbake_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bitbake-language-server" } + ``` + - `filetypes` : + ```lua + { "bitbake" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## blueprint_ls + +https://gitlab.gnome.org/jwestman/blueprint-compiler + +`blueprint-compiler` can be installed via your system package manager. + +Language server for the blueprint markup language, written in python and part +of the blueprint-compiler. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.blueprint_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "blueprint-compiler", "lsp" } + ``` + - `cmd_env` : + ```lua + { + GLOB_PATTERN = "*@(.blp)" + } + ``` + - `filetypes` : + ```lua + { "blueprint" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bqnlsp + +https://git.sr.ht/~detegr/bqnlsp + + +`bqnlsp`, a language server for BQN. + +The binary depends on the shared library of [CBQN](https://github.com/dzaima/CBQN) `libcbqn.so`. +If CBQN is installed system-wide (using `sudo make install` in its source directory) and `bqnlsp` errors that it can't find the shared library, update the linker cache by executing `sudo ldconfig`. +If CBQN has been installed in a non-standard directory or can't be installed globally pass `libcbqnPath = '/path/to/CBQN'` to the setup function. +This will set the environment variables `LD_LIBRARY_PATH` (Linux) or `DYLD_LIBRARY_PATH` (macOS) to the provided path. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bqnlsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bqnlsp" } + ``` + - `filetypes` : + ```lua + { "bqn" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bright_script + +https://github.com/RokuCommunity/brighterscript + +`brightscript` can be installed via `npm`: +```sh +npm install -g brighterscript +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bright_script.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bsc", "--lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "brs" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bsl_ls + + https://github.com/1c-syntax/bsl-language-server + + Language Server Protocol implementation for 1C (BSL) - 1C:Enterprise 8 and OneScript languages. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bsl_ls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "bsl", "os" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + + +## buck2 + +https://github.com/facebook/buck2 + +Build system, successor to Buck + +To better detect Buck2 project files, the following can be added: + +``` +vim.cmd [[ autocmd BufRead,BufNewFile *.bxl,BUCK,TARGETS set filetype=bzl ]] +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.buck2.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "buck2", "lsp" } + ``` + - `filetypes` : + ```lua + { "bzl" } + ``` + - `root_dir` : + ```lua + root_pattern(".buckconfig") + ``` + + +## buddy_ls + +https://github.com/buddy-compiler/buddy-mlir#buddy-lsp-server +The Language Server for the buddy-mlir, a drop-in replacement for mlir-lsp-server, +supporting new dialects defined in buddy-mlir. +`buddy-lsp-server` can be installed at the buddy-mlir repository (buddy-compiler/buddy-mlir) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.buddy_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "buddy-lsp-server" } + ``` + - `filetypes` : + ```lua + { "mlir" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bufls + +https://github.com/bufbuild/buf-language-server + +`buf-language-server` can be installed via `go install`: +```sh +go install github.com/bufbuild/buf-language-server/cmd/bufls@latest +``` + +bufls is a Protobuf language server compatible with Buf modules and workspaces + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bufls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bufls", "serve" } + ``` + - `filetypes` : + ```lua + { "proto" } + ``` + - `root_dir` : + ```lua + root_pattern("buf.work.yaml", ".git") + ``` + + +## bzl + +https://bzl.io/ + +https://docs.stack.build/docs/cli/installation + +https://docs.stack.build/docs/vscode/starlark-language-server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bzl.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bzl", "lsp", "serve" } + ``` + - `filetypes` : + ```lua + { "bzl" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + + +## cadence + +[Cadence Language Server](https://github.com/onflow/cadence-tools/tree/master/languageserver) +using the [flow-cli](https://developers.flow.com/tools/flow-cli). + +The `flow` command from flow-cli must be available. For install instructions see +[the docs](https://developers.flow.com/tools/flow-cli/install#install-the-flow-cli) or the +[Github page](https://github.com/onflow/flow-cli). + +By default the configuration is taken from the closest `flow.json` or the `flow.json` in the users home directory. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cadence.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "flow", "cadence", "language-server" } + ``` + - `filetypes` : + ```lua + { "cdc" } + ``` + - `init_options` : + ```lua + { + numberOfAccounts = "1" + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + util.root_pattern('flow.json') or vim.env.HOME + ``` + + +## cairo_ls + +[Cairo Language Server](https://github.com/starkware-libs/cairo/tree/main/crates/cairo-lang-language-server) + +First, install cairo following [this tutorial](https://medium.com/@elias.tazartes/ahead-of-the-curve-install-cairo-1-0-alpha-and-prepare-for-regenesis-85f4e3940e20) + +Then enable cairo language server in your lua configuration. +```lua +require'lspconfig'.cairo_ls.setup{} +``` + +*cairo-language-server is still under active development, some features might not work yet !* + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cairo_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cairo-language-server", "/C", "--node-ipc" } + ``` + - `filetypes` : + ```lua + { "cairo" } + ``` + - `init_options` : + ```lua + { + hostInfo = "neovim" + } + ``` + - `root_dir` : + ```lua + root_pattern("Scarb.toml", "cairo_project.toml", ".git") + ``` + + +## ccls + +https://github.com/MaskRay/ccls/wiki + +ccls relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified +as compile_commands.json or, for simpler projects, a .ccls. +For details on how to automatically generate one using CMake look [here](https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html). Alternatively, you can use [Bear](https://github.com/rizsotto/Bear). + +Customization options are passed to ccls at initialization time via init_options, a list of available options can be found [here](https://github.com/MaskRay/ccls/wiki/Customization#initialization-options). For example: + +```lua +local lspconfig = require'lspconfig' +lspconfig.ccls.setup { + init_options = { + compilationDatabaseDirectory = "build"; + index = { + threads = 0; + }; + clang = { + excludeArgs = { "-frounding-math"} ; + }; + } +} + +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ccls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ccls" } + ``` + - `filetypes` : + ```lua + { "c", "cpp", "objc", "objcpp", "cuda" } + ``` + - `offset_encoding` : + ```lua + "utf-32" + ``` + - `root_dir` : + ```lua + root_pattern('compile_commands.json', '.ccls', '.git') + ``` + - `single_file_support` : + ```lua + false + ``` + + +## cds_lsp + + +https://cap.cloud.sap/docs/ + +`cds-lsp` can be installed via `npm`: + +```sh +npm i -g @sap/cds-lsp +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cds_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cds-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "cds" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + cds = { + validate = true + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## circom-lsp + +[Circom Language Server](https://github.com/rubydusa/circom-lsp) + +`circom-lsp`, the language server for the Circom language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.circom-lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "circom-lsp" } + ``` + - `filetypes` : + ```lua + { "circom" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## clangd + +https://clangd.llvm.org/installation.html + +- **NOTE:** Clang >= 11 is recommended! See [#23](https://github.com/neovim/nvim-lsp/issues/23). +- If `compile_commands.json` lives in a build directory, you should + symlink it to the root of your source tree. + ``` + ln -s /path/to/myproject/build/compile_commands.json /path/to/myproject/ + ``` +- clangd relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) + specified as compile_commands.json, see https://clangd.llvm.org/installation#compile_commandsjson + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.clangd.setup{} +``` +**Commands:** +- ClangdSwitchSourceHeader: Switch between source/header + +**Default values:** + - `capabilities` : + ```lua + default capabilities, with offsetEncoding utf-8 + ``` + - `cmd` : + ```lua + { "clangd" } + ``` + - `filetypes` : + ```lua + { "c", "cpp", "objc", "objcpp", "cuda", "proto" } + ``` + - `root_dir` : + ```lua + root_pattern( + '.clangd', + '.clang-tidy', + '.clang-format', + 'compile_commands.json', + 'compile_flags.txt', + 'configure.ac', + '.git' + ) + + ``` + - `single_file_support` : + ```lua + true + ``` + + +## clarity_lsp + +`clarity-lsp` is a language server for the Clarity language. Clarity is a decidable smart contract language that optimizes for predictability and security. Smart contracts allow developers to encode essential business logic on a blockchain. + +To learn how to configure the clarity language server, see the [clarity-lsp documentation](https://github.com/hirosystems/clarity-lsp). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.clarity_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "clarity-lsp" } + ``` + - `filetypes` : + ```lua + { "clar", "clarity" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + + +## clojure_lsp + +https://github.com/clojure-lsp/clojure-lsp + +Clojure Language Server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.clojure_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "clojure-lsp" } + ``` + - `filetypes` : + ```lua + { "clojure", "edn" } + ``` + - `root_dir` : + ```lua + root_pattern("project.clj", "deps.edn", "build.boot", "shadow-cljs.edn", ".git", "bb.edn") + ``` + + +## cmake + +https://github.com/regen100/cmake-language-server + +CMake LSP Implementation + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cmake.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cmake-language-server" } + ``` + - `filetypes` : + ```lua + { "cmake" } + ``` + - `init_options` : + ```lua + { + buildDirectory = "build" + } + ``` + - `root_dir` : + ```lua + root_pattern('CMakePresets.json', 'CTestConfig.cmake', '.git', 'build', 'cmake') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## cobol_ls + +Cobol language support + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cobol_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cobol-language-support" } + ``` + - `filetypes` : + ```lua + { "cobol" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## codeqlls + +Reference: +https://codeql.github.com/docs/codeql-cli/ + +Binaries: +https://github.com/github/codeql-cli-binaries + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.codeqlls.setup{} +``` + + +**Default values:** + - `before_init` : + ```lua + see source file + ``` + - `cmd` : + ```lua + { "codeql", "execute", "language-server", "--check-errors", "ON_CHANGE", "-q" } + ``` + - `filetypes` : + ```lua + { "ql" } + ``` + - `log_level` : + ```lua + 2 + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + search_path = "list containing all search paths, eg: '~/codeql-home/codeql-repo'" + } + ``` + + +## coffeesense + +https://github.com/phil294/coffeesense + +CoffeeSense Language Server +`coffeesense-language-server` can be installed via `npm`: +```sh +npm install -g coffeesense-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.coffeesense.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "coffeesense-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "coffee" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## contextive + +https://github.com/dev-cycles/contextive + +Language Server for Contextive. + +Contextive allows you to define terms in a central file and provides auto-completion suggestions and hover panels for these terms wherever they're used. + +To install the language server, you need to download the appropriate [GitHub release asset](https://github.com/dev-cycles/contextive/releases/) for your operating system and architecture. + +After the download unzip the Contextive.LanguageServer binary and copy the file into a folder that is included in your system's PATH. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.contextive.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "Contextive.LanguageServer" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## coq_lsp + +https://github.com/ejgallego/coq-lsp/ + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.coq_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "coq-lsp" } + ``` + - `filetypes` : + ```lua + { "coq" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## crystalline + +https://github.com/elbywan/crystalline + +Crystal language server. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.crystalline.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "crystalline" } + ``` + - `filetypes` : + ```lua + { "crystal" } + ``` + - `root_dir` : + ```lua + root_pattern('shard.yml', '.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## csharp_ls + +https://github.com/razzmatazz/csharp-language-server + +Language Server for C#. + +csharp-ls requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. + +The preferred way to install csharp-ls is with `dotnet tool install --global csharp-ls`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.csharp_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "csharp-ls" } + ``` + - `filetypes` : + ```lua + { "cs" } + ``` + - `init_options` : + ```lua + { + AutomaticWorkspaceInit = true + } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## css_variables + +https://github.com/vunguyentuan/vscode-css-variables/tree/master/packages/css-variables-language-server + +CSS variables autocompletion and go-to-definition + +`css-variables-language-server` can be installed via `npm`: + +```sh +npm i -g css-variables-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.css_variables.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "css-variables-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "css", "scss", "less" } + ``` + - `root_dir` : + ```lua + root_pattern("package.json", ".git") or bufdir + ``` + - `settings` : + ```lua + cssVariables = { + lookupFiles = { '**/*.less', '**/*.scss', '**/*.sass', '**/*.css' }, + blacklistFolders = { + '**/.cache', + '**/.DS_Store', + '**/.git', + '**/.hg', + '**/.next', + '**/.svn', + '**/bower_components', + '**/CVS', + '**/dist', + '**/node_modules', + '**/tests', + '**/tmp', + }, + }, + + ``` + + +## cssls + + +https://github.com/hrsh7th/vscode-langservers-extracted + +`css-languageserver` can be installed via `npm`: + +```sh +npm i -g vscode-langservers-extracted +``` + +Neovim does not currently include built-in snippets. `vscode-css-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. + +```lua +--Enable (broadcasting) snippet capability for completion +local capabilities = vim.lsp.protocol.make_client_capabilities() +capabilities.textDocument.completion.completionItem.snippetSupport = true + +require'lspconfig'.cssls.setup { + capabilities = capabilities, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cssls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vscode-css-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "css", "scss", "less" } + ``` + - `init_options` : + ```lua + { + provideFormatter = true + } + ``` + - `root_dir` : + ```lua + root_pattern("package.json", ".git") or bufdir + ``` + - `settings` : + ```lua + { + css = { + validate = true + }, + less = { + validate = true + }, + scss = { + validate = true + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## cssmodules_ls + +https://github.com/antonk52/cssmodules-language-server + +Language server for autocompletion and go-to-definition functionality for CSS modules. + +You can install cssmodules-language-server via npm: +```sh +npm install -g cssmodules-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cssmodules_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cssmodules-language-server" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "typescript", "typescriptreact" } + ``` + - `root_dir` : + ```lua + root_pattern("package.json") + ``` + + +## cucumber_language_server + +https://cucumber.io +https://github.com/cucumber/common +https://www.npmjs.com/package/@cucumber/language-server + +Language server for Cucumber. + +`cucumber-language-server` can be installed via `npm`: +```sh +npm install -g @cucumber/language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cucumber_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cucumber-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "cucumber" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## custom_elements_ls + +https://github.com/Matsuuu/custom-elements-language-server + +`custom-elements-languageserver` depends on `typescript`. Both packages can be installed via `npm`: +```sh +npm install -g typescript custom-elements-languageserver +``` +To configure typescript language server, add a +[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or +[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your +project. +Here's an example that disables type checking in JavaScript files. +```json +{ + "compilerOptions": { + "module": "commonjs", + "target": "es6", + "checkJs": false + }, + "exclude": [ + "node_modules" + ] +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.custom_elements_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "custom-elements-languageserver", "--stdio" } + ``` + - `init_options` : + ```lua + { + hostInfo = "neovim" + } + ``` + - `root_dir` : + ```lua + root_pattern("tsconfig.json", "package.json", "jsconfig.json", ".git") + ``` + + +## cypher_ls + +https://github.com/neo4j/cypher-language-support/tree/main/packages/language-server + +`cypher-language-server`, language server for Cypher query language. +Part of the umbrella project cypher-language-support: https://github.com/neo4j/cypher-language-support + +`cypher-language-server` can be installed via `npm`: +```sh +npm i -g @neo4j-cypher/language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cypher_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cypher-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "cypher" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dafny + + Support for the Dafny language server. + + The default `cmd` uses "dafny server", which works on Dafny 4.0.0+. For + older versions of Dafny, you can compile the language server from source at + [dafny-lang/language-server-csharp](https://github.com/dafny-lang/language-server-csharp) + and set `cmd = {"dotnet", "<Path to your language server>"}`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dafny.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dafny", "server" } + ``` + - `filetypes` : + ```lua + { "dfy", "dafny" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dagger + +https://github.com/dagger/cuelsp + +Dagger's lsp server for cuelang. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dagger.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cuelsp" } + ``` + - `filetypes` : + ```lua + { "cue" } + ``` + - `root_dir` : + ```lua + root_pattern("cue.mod", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dartls + +https://github.com/dart-lang/sdk/tree/master/pkg/analysis_server/tool/lsp_spec + +Language server for dart. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dartls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dart", "language-server", "--protocol=lsp" } + ``` + - `filetypes` : + ```lua + { "dart" } + ``` + - `init_options` : + ```lua + { + closingLabels = true, + flutterOutline = true, + onlyAnalyzeProjectsWithOpenFiles = true, + outline = true, + suggestFromUnimportedLibraries = true + } + ``` + - `root_dir` : + ```lua + root_pattern("pubspec.yaml") + ``` + - `settings` : + ```lua + { + dart = { + completeFunctionCalls = true, + showTodos = true + } + } + ``` + + +## dcmls + +https://dcm.dev/ + +Language server for DCM analyzer. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dcmls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dcm", "start-server", "--client=neovim" } + ``` + - `filetypes` : + ```lua + { "dart" } + ``` + - `root_dir` : + ```lua + root_pattern("pubspec.yaml") + ``` + + +## debputy + +https://salsa.debian.org/debian/debputy + +Language Server for Debian packages. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.debputy.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "debputy", "lsp", "server" } + ``` + - `filetypes` : + ```lua + { "debcontrol", "debcopyright", "debchangelog", "make", "yaml" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## delphi_ls + +Language server for Delphi from Embarcadero. +https://marketplace.visualstudio.com/items?itemName=EmbarcaderoTechnologies.delphilsp + +Note, the '*.delphilsp.json' file is required, more details at: +https://docwiki.embarcadero.com/RADStudio/Alexandria/en/Using_DelphiLSP_Code_Insight_with_Other_Editors + +Below, you'll find a sample configuration for the lazy manager. +When on_attach is triggered, it signals DelphiLSP to load settings from a configuration file. +Without this step, DelphiLSP initializes but remains non-functional: + +```lua +"neovim/nvim-lspconfig", +lazy = false, +config = function() + local capabilities = require("cmp_nvim_lsp").default_capabilities() + local lspconfig = require("lspconfig") + + lspconfig.delphi_ls.setup({ + capabilities = capabilities, + + on_attach = function(client) + local lsp_config = vim.fs.find(function(name) + return name:match(".*%.delphilsp.json$") + end, { type = "file", path = client.config.root_dir, upward = false })[1] + + if lsp_config then + client.config.settings = { settingsFile = lsp_config } + client.notify("workspace/didChangeConfiguration", { settings = client.config.settings }) + else + vim.notify_once("delphi_ls: '*.delphilsp.json' config file not found") + end + end, + }) +end, +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.delphi_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "DelphiLSP.exe" } + ``` + - `filetypes` : + ```lua + { "pascal" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + false + ``` + + +## denols + +https://github.com/denoland/deno + +Deno's built-in language server + +To appropriately highlight codefences returned from denols, you will need to augment vim.g.markdown_fenced languages + in your init.lua. Example: + +```lua +vim.g.markdown_fenced_languages = { + "ts=typescript" +} +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.denols.setup{} +``` +**Commands:** +- DenolsCache: Cache a module and all of its dependencies. + +**Default values:** + - `cmd` : + ```lua + { "deno", "lsp" } + ``` + - `cmd_env` : + ```lua + { + NO_COLOR = true + } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } + ``` + - `handlers` : + ```lua + { + ["textDocument/definition"] = <function 1>, + ["textDocument/references"] = <function 1>, + ["textDocument/typeDefinition"] = <function 1> + } + ``` + - `root_dir` : + ```lua + root_pattern("deno.json", "deno.jsonc", ".git") + ``` + - `settings` : + ```lua + { + deno = { + enable = true, + suggest = { + imports = { + hosts = { + ["https://deno.land"] = true + } + } + } + } + } + ``` + + +## dhall_lsp_server + +https://github.com/dhall-lang/dhall-haskell/tree/master/dhall-lsp-server + +language server for dhall + +`dhall-lsp-server` can be installed via cabal: +```sh +cabal install dhall-lsp-server +``` +prebuilt binaries can be found [here](https://github.com/dhall-lang/dhall-haskell/releases). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dhall_lsp_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dhall-lsp-server" } + ``` + - `filetypes` : + ```lua + { "dhall" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## diagnosticls + +https://github.com/iamcco/diagnostic-languageserver + +Diagnostic language server integrate with linters. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.diagnosticls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "diagnostic-languageserver", "--stdio" } + ``` + - `filetypes` : + ```lua + Empty by default, override to add filetypes + ``` + - `root_dir` : + ```lua + Vim's starting directory + ``` + - `single_file_support` : + ```lua + true + ``` + + +## digestif + +https://github.com/astoff/digestif + +Digestif is a code analyzer, and a language server, for LaTeX, ConTeXt et caterva. It provides + +context-sensitive completion, documentation, code navigation, and related functionality to any + +text editor that speaks the LSP protocol. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.digestif.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "digestif" } + ``` + - `filetypes` : + ```lua + { "tex", "plaintex", "context" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## docker_compose_language_service + +https://github.com/microsoft/compose-language-service +This project contains a language service for Docker Compose. + +`compose-language-service` can be installed via `npm`: + +```sh +npm install @microsoft/compose-language-service +``` + +Note: If the docker-compose-langserver doesn't startup when entering a `docker-compose.yaml` file, make sure that the filetype is `yaml.docker-compose`. You can set with: `:set filetype=yaml.docker-compose`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.docker_compose_language_service.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "docker-compose-langserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "yaml.docker-compose" } + ``` + - `root_dir` : + ```lua + root_pattern("docker-compose.yaml", "docker-compose.yml", "compose.yaml", "compose.yml") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dockerls + +https://github.com/rcjsuen/dockerfile-language-server-nodejs + +`docker-langserver` can be installed via `npm`: +```sh +npm install -g dockerfile-language-server-nodejs +``` + +Additional configuration can be applied in the following way: +```lua +require("lspconfig").dockerls.setup { + settings = { + docker = { + languageserver = { + formatter = { + ignoreMultilineInstructions = true, + }, + }, + } + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dockerls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "docker-langserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "dockerfile" } + ``` + - `root_dir` : + ```lua + root_pattern("Dockerfile") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dolmenls + +https://github.com/Gbury/dolmen/blob/master/doc/lsp.md + +`dolmenls` can be installed via `opam` +```sh +opam install dolmen_lsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dolmenls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dolmenls" } + ``` + - `filetypes` : + ```lua + { "smt2", "tptp", "p", "cnf", "icnf", "zf" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dotls + +https://github.com/nikeee/dot-language-server + +`dot-language-server` can be installed via `npm`: +```sh +npm install -g dot-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dotls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dot-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "dot" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dprint + +https://github.com/dprint/dprint + +Pluggable and configurable code formatting platform written in Rust. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dprint.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dprint", "lsp" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "typescript", "typescriptreact", "json", "jsonc", "markdown", "python", "toml", "rust", "roslyn" } + ``` + - `root_dir` : + ```lua + <function 1> + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## drools_lsp + +https://github.com/kiegroup/drools-lsp + +Language server for the [Drools Rule Language (DRL)](https://docs.drools.org/latest/drools-docs/docs-website/drools/language-reference/#con-drl_drl-rules). + +The `drools-lsp` server is a self-contained java jar file (`drools-lsp-server-jar-with-dependencies.jar`), and can be downloaded from [https://github.com/kiegroup/drools-lsp/releases/](https://github.com/kiegroup/drools-lsp/releases/). + +Configuration information: +```lua +-- Option 1) Specify the entire command: +require('lspconfig').drools_lsp.setup { + cmd = { '/path/to/java', '-jar', '/path/to/drools-lsp-server-jar-with-dependencies.jar' }, +} + +-- Option 2) Specify just the jar path (the JAVA_HOME environment variable will be respected if present): +require('lspconfig').drools_lsp.setup { + drools = { jar = '/path/to/drools-lsp-server-jar-with-dependencies.jar' }, +} + +-- Option 3) Specify the java bin and/or java opts in addition to the jar path: +require('lspconfig').drools_lsp.setup { + drools = { + java = { bin = '/path/to/java', opts = { '-Xmx100m' } }, + jar = '/path/to/drools-lsp-server-jar-with-dependencies.jar', + }, +} +``` + +Neovim does not yet have automatic detection for the `drools` filetype, but it can be added with: +```lua +vim.cmd [[ autocmd BufNewFile,BufRead *.drl set filetype=drools ]] +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.drools_lsp.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "drools" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ds_pinyin_lsp + +https://github.com/iamcco/ds-pinyin-lsp +Dead simple Pinyin language server for input Chinese without IME(input method). +To install, download the latest [release](https://github.com/iamcco/ds-pinyin-lsp/releases) and ensure `ds-pinyin-lsp` is on your path. +And make ensure the database file `dict.db3` is also downloaded. And put the path to `dict.dbs` in the following code. + +```lua + +require('lspconfig').ds_pinyin_lsp.setup { + init_options = { + db_path = "your_path_to_database" + } +} + +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ds_pinyin_lsp.setup{} +``` +**Commands:** +- DsPinyinCompletionOff: Turn off the ds-pinyin-lsp completion +- DsPinyinCompletionOn: Turn on the ds-pinyin-lsp completion + +**Default values:** + - `cmd` : + ```lua + { "ds-pinyin-lsp" } + ``` + - `filetypes` : + ```lua + { "markdown", "org" } + ``` + - `init_options` : + ```lua + { + completion_on = true, + match_as_same_as_input = true, + match_long_input = true, + max_suggest = 15, + show_symbols = true, + show_symbols_by_n_times = 0, + show_symbols_only_follow_by_hanzi = false + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## earthlyls + +https://github.com/glehmann/earthlyls + +A fast language server for earthly. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.earthlyls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "earthlyls" } + ``` + - `filetypes` : + ```lua + { "earthfile" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## ecsact + +https://github.com/ecsact-dev/ecsact_lsp_server + +Language server for Ecsact. + +The default cmd assumes `ecsact_lsp_server` is in your PATH. Typically from the +Ecsact SDK: https://ecsact.dev/start + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ecsact.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ecsact_lsp_server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "ecsact" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## efm + +https://github.com/mattn/efm-langserver + +General purpose Language Server that can use specified error message format generated from specified command. + +Requires at minimum EFM version [v0.0.38](https://github.com/mattn/efm-langserver/releases/tag/v0.0.38) to support +launching the language server on single files. If on an older version of EFM, disable single file support: + +```lua +require('lspconfig')['efm'].setup{ + settings = ..., -- You must populate this according to the EFM readme + filetypes = ..., -- Populate this according to the note below + single_file_support = false, -- This is the important line for supporting older version of EFM +} +``` + +Note: In order for neovim's built-in language server client to send the appropriate `languageId` to EFM, **you must +specify `filetypes` in your call to `setup{}`**. Otherwise `lspconfig` will launch EFM on the `BufEnter` instead +of the `FileType` autocommand, and the `filetype` variable used to populate the `languageId` will not yet be set. + +```lua +require('lspconfig')['efm'].setup{ + settings = ..., -- You must populate this according to the EFM readme + filetypes = { 'python','cpp','lua' } +} +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.efm.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "efm-langserver" } + ``` + - `root_dir` : + ```lua + util.root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## elixirls + +https://github.com/elixir-lsp/elixir-ls + +`elixir-ls` can be installed by following the instructions [here](https://github.com/elixir-lsp/elixir-ls#building-and-running). + +```bash +curl -fLO https://github.com/elixir-lsp/elixir-ls/releases/latest/download/elixir-ls.zip +unzip elixir-ls.zip -d /path/to/elixir-ls +# Unix +chmod +x /path/to/elixir-ls/language_server.sh +``` + +**By default, elixir-ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped elixir-ls. + +```lua +require'lspconfig'.elixirls.setup{ + -- Unix + cmd = { "/path/to/elixir-ls/language_server.sh" }; + -- Windows + cmd = { "/path/to/elixir-ls/language_server.bat" }; + ... +} +``` + +'root_dir' is chosen like this: if two or more directories containing `mix.exs` were found when searching directories upward, the second one (higher up) is chosen, with the assumption that it is the root of an umbrella app. Otherwise the directory containing the single mix.exs that was found is chosen. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.elixirls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "elixir", "eelixir", "heex", "surface" } + ``` + - `root_dir` : + ```lua + {{see description above}} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## elmls + +https://github.com/elm-tooling/elm-language-server#installation + +If you don't want to use Nvim to install it, then you can use: +```sh +npm install -g elm elm-test elm-format @elm-tooling/elm-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.elmls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "elm-language-server" } + ``` + - `filetypes` : + ```lua + { "elm" } + ``` + - `init_options` : + ```lua + { + disableElmLSDiagnostics = false, + elmReviewDiagnostics = "off", + onlyUpdateDiagnosticsOnSave = false, + skipInstallPackageConfirmation = false + } + ``` + - `root_dir` : + ```lua + root_pattern("elm.json") + ``` + + +## elp + +https://whatsapp.github.io/erlang-language-platform + +ELP integrates Erlang into modern IDEs via the language server protocol and was +inspired by rust-analyzer. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.elp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "elp", "server" } + ``` + - `filetypes` : + ```lua + { "erlang" } + ``` + - `root_dir` : + ```lua + root_pattern('rebar.config', 'erlang.mk', '.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ember + +https://github.com/ember-tooling/ember-language-server + +`ember-language-server` can be installed via `npm`: + +```sh +npm install -g @ember-tooling/ember-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ember.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ember-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "handlebars", "typescript", "javascript", "typescript.glimmer", "javascript.glimmer" } + ``` + - `root_dir` : + ```lua + root_pattern("ember-cli-build.js", ".git") + ``` + + +## emmet_language_server + +https://github.com/olrtg/emmet-language-server + +Package can be installed via `npm`: +```sh +npm install -g @olrtg/emmet-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.emmet_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "emmet-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "css", "eruby", "html", "htmldjango", "javascriptreact", "less", "pug", "sass", "scss", "typescriptreact" } + ``` + - `root_dir` : + ```lua + git root + ``` + - `single_file_support` : + ```lua + true + ``` + + +## emmet_ls + +https://github.com/aca/emmet-ls + +Package can be installed via `npm`: +```sh +npm install -g emmet-ls +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.emmet_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "emmet-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "astro", "css", "eruby", "html", "htmldjango", "javascriptreact", "less", "pug", "sass", "scss", "svelte", "typescriptreact", "vue" } + ``` + - `root_dir` : + ```lua + git root + ``` + - `single_file_support` : + ```lua + true + ``` + + +## erg_language_server + +https://github.com/erg-lang/erg#flags ELS + +ELS (erg-language-server) is a language server for the Erg programming language. + +erg-language-server can be installed via `cargo` and used as follows: + ```sh + cargo install erg --features els + erg --language-server + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.erg_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "erg", "--language-server" } + ``` + - `filetypes` : + ```lua + { "erg" } + ``` + - `root_dir` : + ```lua + root_pattern("package.er") or find_git_ancestor + ``` + + +## erlangls + +https://erlang-ls.github.io + +Language Server for Erlang. + +Clone [erlang_ls](https://github.com/erlang-ls/erlang_ls) +Compile the project with `make` and copy resulting binaries somewhere in your $PATH eg. `cp _build/*/bin/* ~/local/bin` + +Installation instruction can be found [here](https://github.com/erlang-ls/erlang_ls). + +Installation requirements: + - [Erlang OTP 21+](https://github.com/erlang/otp) + - [rebar3 3.9.1+](https://github.com/erlang/rebar3) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.erlangls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "erlang_ls" } + ``` + - `filetypes` : + ```lua + { "erlang" } + ``` + - `root_dir` : + ```lua + root_pattern('rebar.config', 'erlang.mk', '.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## esbonio + +https://github.com/swyddfa/esbonio + +Esbonio is a language server for [Sphinx](https://www.sphinx-doc.org/en/master/) documentation projects. +The language server can be installed via pip + +``` +pip install esbonio +``` + +Since Sphinx is highly extensible you will get best results if you install the language server in the same +Python environment as the one used to build your documentation. To ensure that the correct Python environment +is picked up, you can either launch `nvim` with the correct environment activated. + +``` +source env/bin/activate +nvim +``` + +Or you can modify the default `cmd` to include the full path to the Python interpreter. + +```lua +require'lspconfig'.esbonio.setup { + cmd = { '/path/to/virtualenv/bin/python', '-m', 'esbonio' } +} +``` + +Esbonio supports a number of config values passed as `init_options` on startup, for example. + +```lua +require'lspconfig'.esbonio.setup { + init_options = { + server = { + logLevel = "debug" + }, + sphinx = { + confDir = "/path/to/docs", + srcDir = "${confDir}/../docs-src" + } +} +``` + +A full list and explanation of the available options can be found [here](https://docs.esbon.io/en/esbonio-language-server-v0.16.4/lsp/getting-started.html?editor=neovim-lspconfig#configuration) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.esbonio.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "python3", "-m", "esbonio" } + ``` + - `filetypes` : + ```lua + { "rst" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## eslint + +https://github.com/hrsh7th/vscode-langservers-extracted + +`vscode-eslint-language-server` is a linting engine for JavaScript / Typescript. +It can be installed via `npm`: + +```sh +npm i -g vscode-langservers-extracted +``` + +`vscode-eslint-language-server` provides an `EslintFixAll` command that can be used to format a document on save: +```lua +lspconfig.eslint.setup({ + --- ... + on_attach = function(client, bufnr) + vim.api.nvim_create_autocmd("BufWritePre", { + buffer = bufnr, + command = "EslintFixAll", + }) + end, +}) +``` + +See [vscode-eslint](https://github.com/microsoft/vscode-eslint/blob/55871979d7af184bf09af491b6ea35ebd56822cf/server/src/eslintServer.ts#L216-L229) for configuration options. + +Messages handled in lspconfig: `eslint/openDoc`, `eslint/confirmESLintExecution`, `eslint/probeFailed`, `eslint/noLibrary` + +Additional messages you can handle: `eslint/noConfig` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.eslint.setup{} +``` +**Commands:** +- EslintFixAll: Fix all eslint problems for this buffer + +**Default values:** + - `cmd` : + ```lua + { "vscode-eslint-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx", "vue", "svelte", "astro" } + ``` + - `handlers` : + ```lua + { + ["eslint/confirmESLintExecution"] = <function 1>, + ["eslint/noLibrary"] = <function 2>, + ["eslint/openDoc"] = <function 3>, + ["eslint/probeFailed"] = <function 4> + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + codeAction = { + disableRuleComment = { + enable = true, + location = "separateLine" + }, + showDocumentation = { + enable = true + } + }, + codeActionOnSave = { + enable = false, + mode = "all" + }, + experimental = { + useFlatConfig = false + }, + format = true, + nodePath = "", + onIgnoredFiles = "off", + problems = { + shortenToSingleLine = false + }, + quiet = false, + rulesCustomizations = {}, + run = "onType", + useESLintClass = false, + validate = "on", + workingDirectory = { + mode = "location" + } + } + ``` + + +## facility_language_server + +https://github.com/FacilityApi/FacilityLanguageServer + +Facility language server protocol (LSP) support. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.facility_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "facility-language-server" } + ``` + - `filetypes` : + ```lua + { "fsd" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## fennel_language_server + +https://github.com/rydesun/fennel-language-server + +Fennel language server protocol (LSP) support. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fennel_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "fennel-language-server" } + ``` + - `filetypes` : + ```lua + { "fennel" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## fennel_ls + +https://sr.ht/~xerool/fennel-ls/ + +A language server for fennel. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fennel_ls.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + { + general = { + positionEncodings = { "utf-16" } + }, + offsetEncoding = { "utf-8", "utf-16" }, + textDocument = { + callHierarchy = { + dynamicRegistration = false + }, + codeAction = { + codeActionLiteralSupport = { + codeActionKind = { + valueSet = { "", "quickfix", "refactor", "refactor.extract", "refactor.inline", "refactor.rewrite", "source", "source.organizeImports" } + } + }, + dataSupport = true, + dynamicRegistration = true, + isPreferredSupport = true, + resolveSupport = { + properties = { "edit" } + } + }, + completion = { + completionItem = { + commitCharactersSupport = false, + deprecatedSupport = false, + documentationFormat = { "markdown", "plaintext" }, + preselectSupport = false, + snippetSupport = false + }, + completionItemKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 } + }, + completionList = { + itemDefaults = { "editRange", "insertTextFormat", "insertTextMode", "data" } + }, + contextSupport = false, + dynamicRegistration = false + }, + declaration = { + linkSupport = true + }, + definition = { + dynamicRegistration = true, + linkSupport = true + }, + diagnostic = { + dynamicRegistration = false + }, + documentHighlight = { + dynamicRegistration = false + }, + documentSymbol = { + dynamicRegistration = false, + hierarchicalDocumentSymbolSupport = true, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + formatting = { + dynamicRegistration = true + }, + hover = { + contentFormat = { "markdown", "plaintext" }, + dynamicRegistration = true + }, + implementation = { + linkSupport = true + }, + inlayHint = { + dynamicRegistration = true, + resolveSupport = { + properties = { "textEdits", "tooltip", "location", "command" } + } + }, + publishDiagnostics = { + dataSupport = true, + relatedInformation = true, + tagSupport = { + valueSet = { 1, 2 } + } + }, + rangeFormatting = { + dynamicRegistration = true + }, + references = { + dynamicRegistration = false + }, + rename = { + dynamicRegistration = true, + prepareSupport = true + }, + semanticTokens = { + augmentsSyntaxTokens = true, + dynamicRegistration = false, + formats = { "relative" }, + multilineTokenSupport = false, + overlappingTokenSupport = true, + requests = { + full = { + delta = true + }, + range = false + }, + serverCancelSupport = false, + tokenModifiers = { "declaration", "definition", "readonly", "static", "deprecated", "abstract", "async", "modification", "documentation", "defaultLibrary" }, + tokenTypes = { "namespace", "type", "class", "enum", "interface", "struct", "typeParameter", "parameter", "variable", "property", "enumMember", "event", "function", "method", "macro", "keyword", "modifier", "comment", "string", "number", "regexp", "operator", "decorator" } + }, + signatureHelp = { + dynamicRegistration = false, + signatureInformation = { + activeParameterSupport = true, + documentationFormat = { "markdown", "plaintext" }, + parameterInformation = { + labelOffsetSupport = true + } + } + }, + synchronization = { + didSave = true, + dynamicRegistration = false, + willSave = true, + willSaveWaitUntil = true + }, + typeDefinition = { + linkSupport = true + } + }, + window = { + showDocument = { + support = true + }, + showMessage = { + messageActionItem = { + additionalPropertiesSupport = false + } + }, + workDoneProgress = true + }, + workspace = { + applyEdit = true, + configuration = true, + didChangeConfiguration = { + dynamicRegistration = false + }, + didChangeWatchedFiles = { + dynamicRegistration = false, + relativePatternSupport = true + }, + inlayHint = { + refreshSupport = true + }, + semanticTokens = { + refreshSupport = true + }, + symbol = { + dynamicRegistration = false, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + workspaceEdit = { + resourceOperations = { "rename", "create", "delete" } + }, + workspaceFolders = true + } + } + ``` + - `cmd` : + ```lua + { "fennel-ls" } + ``` + - `filetypes` : + ```lua + { "fennel" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## flow + +https://flow.org/ +https://github.com/facebook/flow + +See below for how to setup Flow itself. +https://flow.org/en/docs/install/ + +See below for lsp command options. + +```sh +npx flow lsp --help +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.flow.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "npx", "--no-install", "flow", "lsp" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx" } + ``` + - `root_dir` : + ```lua + root_pattern(".flowconfig") + ``` + + +## flux_lsp + +https://github.com/influxdata/flux-lsp +`flux-lsp` can be installed via `cargo`: +```sh +cargo install --git https://github.com/influxdata/flux-lsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.flux_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "flux-lsp" } + ``` + - `filetypes` : + ```lua + { "flux" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## foam_ls + +https://github.com/FoamScience/foam-language-server + +`foam-language-server` can be installed via `npm` +```sh +npm install -g foam-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.foam_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "foam-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "foam", "OpenFOAM" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## fortls + +https://github.com/gnikit/fortls + +fortls is a Fortran Language Server, the server can be installed via pip + +```sh +pip install fortls +``` + +Settings to the server can be passed either through the `cmd` option or through +a local configuration file e.g. `.fortls`. For more information +see the `fortls` [documentation](https://gnikit.github.io/fortls/options.html). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fortls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "fortls", "--notify_init", "--hover_signature", "--hover_language=fortran", "--use_signature_help" } + ``` + - `filetypes` : + ```lua + { "fortran" } + ``` + - `root_dir` : + ```lua + root_pattern(".fortls") + ``` + - `settings` : + ```lua + {} + ``` + + +## fsautocomplete + +https://github.com/fsharp/FsAutoComplete + +Language Server for F# provided by FsAutoComplete (FSAC). + +FsAutoComplete requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. + +The preferred way to install FsAutoComplete is with `dotnet tool install --global fsautocomplete`. + +Instructions to compile from source are found on the main [repository](https://github.com/fsharp/FsAutoComplete). + +You may also need to configure the filetype as Vim defaults to Forth for `*.fs` files: + +`autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp` + +This is automatically done by plugins such as [PhilT/vim-fsharp](https://github.com/PhilT/vim-fsharp), [fsharp/vim-fsharp](https://github.com/fsharp/vim-fsharp), and [adelarsq/neofsharp.vim](https://github.com/adelarsq/neofsharp.vim). + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fsautocomplete.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "fsautocomplete", "--adaptive-lsp-server-enabled" } + ``` + - `filetypes` : + ```lua + { "fsharp" } + ``` + - `init_options` : + ```lua + { + AutomaticWorkspaceInit = true + } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## fsharp_language_server + +F# Language Server +https://github.com/faldor20/fsharp-language-server + +An implementation of the language server protocol using the F# Compiler Service. + +Build the project from source and override the command path to location of DLL. + +If filetype determination is not already performed by an available plugin ([PhilT/vim-fsharp](https://github.com/PhilT/vim-fsharp), [fsharp/vim-fsharp](https://github.com/fsharp/vim-fsharp), and [adelarsq/neofsharp.vim](https://github.com/adelarsq/neofsharp.vim). +), then the following must be added to initialization configuration: + + +`autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fsharp_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dotnet", "FSharpLanguageServer.dll" } + ``` + - `filetypes` : + ```lua + { "fsharp" } + ``` + - `init_options` : + ```lua + { + AutomaticWorkspaceInit = true + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## fstar + +https://github.com/FStarLang/FStar + +LSP support is included in FStar. Make sure `fstar.exe` is in your PATH. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fstar.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "fstar.exe", "--lsp" } + ``` + - `filetypes` : + ```lua + { "fstar" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## futhark_lsp + +https://github.com/diku-dk/futhark + +Futhark Language Server + +This language server comes with the futhark compiler and is run with the command +``` +futhark lsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.futhark_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "futhark", "lsp" } + ``` + - `filetypes` : + ```lua + { "futhark", "fut" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## gdscript + +https://github.com/godotengine/godot + +Language server for GDScript, used by Godot Engine. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gdscript.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + see source file + ``` + - `filetypes` : + ```lua + { "gd", "gdscript", "gdscript3" } + ``` + - `root_dir` : + ```lua + util.root_pattern("project.godot", ".git") + ``` + + +## gdshader_lsp + +https://github.com/godofavacyn/gdshader-lsp + +A language server for the Godot Shading language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gdshader_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "gdshader-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "gdshader", "gdshaderinc" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## ghcide + +https://github.com/digital-asset/ghcide + +A library for building Haskell IDE tooling. +"ghcide" isn't for end users now. Use "haskell-language-server" instead of "ghcide". + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ghcide.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ghcide", "--lsp" } + ``` + - `filetypes` : + ```lua + { "haskell", "lhaskell" } + ``` + - `root_dir` : + ```lua + root_pattern("stack.yaml", "hie-bios", "BUILD.bazel", "cabal.config", "package.yaml") + ``` + + +## ghdl_ls + +https://github.com/ghdl/ghdl-language-server + +A language server for VHDL, using ghdl as its backend. + +`ghdl-ls` is part of pyghdl, for installation instructions see +[the upstream README](https://github.com/ghdl/ghdl/tree/master/pyGHDL/lsp). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ghdl_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ghdl-ls" } + ``` + - `filetypes` : + ```lua + { "vhdl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ginko_ls + +`ginko_ls` is meant to be a feature-complete language server for device-trees. +Language servers can be used in many editors, such as Visual Studio Code, Emacs +or Vim + +Install `ginko_ls` from https://github.com/Schottkyc137/ginko and add it to path + +`ginko_ls` doesn't require any configuration. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ginko_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ginko_ls" } + ``` + - `filetypes` : + ```lua + { "dts" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## gitlab_ci_ls + +https://github.com/alesbrelih/gitlab-ci-ls + +Language Server for Gitlab CI + +`gitlab-ci-ls` can be installed via cargo: +cargo install gitlab-ci-ls + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gitlab_ci_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "gitlab-ci-ls" } + ``` + - `filetypes` : + ```lua + { "yaml.gitlab" } + ``` + - `init_options` : + ```lua + { + cache_path = "util.path.join(vim.loop.os_homedir(), '.cache/gitlab-ci-ls/')", + log_path = "util.path.join(util.path.join(vim.loop.os_homedir(), '.cache/gitlab-ci-ls/'), 'log/gitlab-ci-ls.log')" + } + ``` + - `root_dir` : + ```lua + util.root_pattern('.gitlab*', '.git') + ``` + + +## gleam + +https://github.com/gleam-lang/gleam + +A language server for Gleam Programming Language. +[Installation](https://gleam.run/getting-started/installing/) + +It can be i + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gleam.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "gleam", "lsp" } + ``` + - `filetypes` : + ```lua + { "gleam" } + ``` + - `root_dir` : + ```lua + root_pattern("gleam.toml", ".git") + ``` + + +## glint + + https://github.com/typed-ember/glint + + https://typed-ember.gitbook.io/glint/ + + `glint-language-server` is installed when adding `@glint/core` to your project's devDependencies: + + ```sh + npm install @glint/core --save-dev + ``` + + or + + ```sh + yarn add -D @glint/core + ``` + + or + + ```sh + pnpm add -D @glint/core + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.glint.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "glint-language-server" } + ``` + - `filetypes` : + ```lua + { "html.handlebars", "handlebars", "typescript", "typescript.glimmer", "javascript", "javascript.glimmer" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## glsl_analyzer + +https://github.com/nolanderc/glsl_analyzer + +Language server for GLSL + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.glsl_analyzer.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + {} + ``` + - `cmd` : + ```lua + { "glsl_analyzer" } + ``` + - `filetypes` : + ```lua + { "glsl", "vert", "tesc", "tese", "frag", "geom", "comp" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## glslls + +https://github.com/svenstaro/glsl-language-server + +Language server implementation for GLSL + +`glslls` can be compiled and installed manually, or, if your distribution has access to the AUR, +via the `glsl-language-server` AUR package + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.glslls.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + { + offsetEncoding = { "utf-8", "utf-16" }, + textDocument = { + completion = { + editsNearCursor = true + } + } + } + ``` + - `cmd` : + ```lua + { "glslls", "--stdin" } + ``` + - `filetypes` : + ```lua + { "glsl", "vert", "tesc", "tese", "frag", "geom", "comp" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## golangci_lint_ls + +Combination of both lint server and client + +https://github.com/nametake/golangci-lint-langserver +https://github.com/golangci/golangci-lint + + +Installation of binaries needed is done via + +``` +go install github.com/nametake/golangci-lint-langserver@latest +go install github.com/golangci/golangci-lint/cmd/golangci-lint@latest +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.golangci_lint_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "golangci-lint-langserver" } + ``` + - `filetypes` : + ```lua + { "go", "gomod" } + ``` + - `init_options` : + ```lua + { + command = { "golangci-lint", "run", "--out-format", "json" } + } + ``` + - `root_dir` : + ```lua + root_pattern('.golangci.yml', '.golangci.yaml', '.golangci.toml', '.golangci.json', 'go.work', 'go.mod', '.git') + ``` + + +## gopls + +https://github.com/golang/tools/tree/master/gopls + +Google's lsp server for golang. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gopls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "gopls" } + ``` + - `filetypes` : + ```lua + { "go", "gomod", "gowork", "gotmpl" } + ``` + - `root_dir` : + ```lua + root_pattern("go.work", "go.mod", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## gradle_ls + +https://github.com/microsoft/vscode-gradle + +Microsoft's lsp server for gradle files + +If you're setting this up manually, build vscode-gradle using `./gradlew installDist` and point `cmd` to the `gradle-language-server` generated in the build directory + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gradle_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "gradle-language-server" } + ``` + - `filetypes` : + ```lua + { "groovy" } + ``` + - `init_options` : + ```lua + { + settings = { + gradleWrapperEnabled = true + } + } + ``` + - `root_dir` : + ```lua + root_pattern("settings.gradle", "build.gradle") + ``` + + +## grammarly + +https://github.com/znck/grammarly + +`grammarly-languageserver` can be installed via `npm`: + +```sh +npm i -g grammarly-languageserver +``` + +WARNING: Since this language server uses Grammarly's API, any document you open with it running is shared with them. Please evaluate their [privacy policy](https://www.grammarly.com/privacy-policy) before using this. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.grammarly.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "grammarly-languageserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "markdown" } + ``` + - `handlers` : + ```lua + { + ["$/updateDocumentState"] = <function 1> + } + ``` + - `init_options` : + ```lua + { + clientId = "client_BaDkMgx4X19X9UxxYRCXZo" + } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## graphql + +https://github.com/graphql/graphiql/tree/main/packages/graphql-language-service-cli + +`graphql-lsp` can be installed via `npm`: + +```sh +npm install -g graphql-language-service-cli +``` + +Note that you must also have [the graphql package](https://github.com/graphql/graphql-js) installed within your project and create a [GraphQL config file](https://the-guild.dev/graphql/config/docs). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.graphql.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "graphql-lsp", "server", "-m", "stream" } + ``` + - `filetypes` : + ```lua + { "graphql", "typescriptreact", "javascriptreact" } + ``` + - `root_dir` : + ```lua + util.root_pattern('.git', '.graphqlrc*', '.graphql.config.*', 'graphql.config.*') + ``` + + +## groovyls + +https://github.com/prominic/groovy-language-server.git + +Requirements: + - Linux/macOS (for now) + - Java 11+ + +`groovyls` can be installed by following the instructions [here](https://github.com/prominic/groovy-language-server.git#build). + +If you have installed groovy language server, you can set the `cmd` custom path as follow: + +```lua +require'lspconfig'.groovyls.setup{ + -- Unix + cmd = { "java", "-jar", "path/to/groovyls/groovy-language-server-all.jar" }, + ... +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.groovyls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "java", "-jar", "groovy-language-server-all.jar" } + ``` + - `filetypes` : + ```lua + { "groovy" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## guile_ls + +https://codeberg.org/rgherdt/scheme-lsp-server + +The recommended way is to install guile-lsp-server is using Guix. Unfortunately it is still not available at the official Guix channels, but you can use the provided channel guix.scm in the repo: +```sh +guix package -f guix.scm +``` + +Checkout the repo for more info. + +Note: This LSP will start on `scheme.guile` filetype. You can set this file type using `:help modeline` or adding https://gitlab.com/HiPhish/guile.vim to your plugins to automatically set it. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.guile_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "guile-lsp-server" } + ``` + - `filetypes` : + ```lua + { "scheme.guile" } + ``` + - `root_dir` : + ```lua + root_pattern("guix.scm", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## harper_ls + +https://github.com/chilipepperhott/harper + +The language server for Harper, the slim, clean language checker for developers. + +See [docs](https://github.com/chilipepperhott/harper/tree/master/harper-ls#configuration) for more information on settings. + +In short, however, they should look something like this: +```lua +lspconfig.harper_ls.setup { + settings = { + ["harper-ls"] = { + userDictPath = "~/dict.txt" + } + }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.harper_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "harper-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "markdown", "rust", "typescript", "typescriptreact", "javascript", "python", "go", "c", "cpp", "ruby", "swift", "csharp", "toml", "lua" } + ``` + - `root_dir` : + ```lua + bufdir + ``` + - `single_file_support` : + ```lua + true + ``` + + +## haxe_language_server + +https://github.com/vshaxe/haxe-language-server + +The Haxe language server can be built by running the following commands from +the project's root directory: + + npm install + npx lix run vshaxe-build -t language-server + +This will create `bin/server.js`. Note that the server requires Haxe 3.4.0 or +higher. + +After building the language server, set the `cmd` setting in your setup +function: + +```lua +lspconfig.haxe_language_server.setup({ + cmd = {"node", "path/to/bin/server.js"}, +}) +``` + +By default, an HXML compiler arguments file named `build.hxml` is expected in +your project's root directory. If your file is named something different, +specify it using the `init_options.displayArguments` setting. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.haxe_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "haxe-language-server" } + ``` + - `filetypes` : + ```lua + { "haxe" } + ``` + - `init_options` : + ```lua + { + displayArguments = { "build.hxml" } + } + ``` + - `root_dir` : + ```lua + root_pattern("*.hxml") + ``` + - `settings` : + ```lua + { + haxe = { + executable = "haxe" + } + } + ``` + + +## hdl_checker + +https://github.com/suoto/hdl_checker +Language server for hdl-checker. +Install using: `pip install hdl-checker --upgrade` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hdl_checker.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hdl_checker", "--lsp" } + ``` + - `filetypes` : + ```lua + { "vhdl", "verilog", "systemverilog" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## helm_ls + +https://github.com/mrjosh/helm-ls + +Helm Language server. (This LSP is in early development) + +`helm Language server` can be installed by following the instructions [here](https://github.com/mrjosh/helm-ls). + +The default `cmd` assumes that the `helm_ls` binary can be found in `$PATH`. + +If need Helm file highlight use [vim-helm](https://github.com/towolf/vim-helm) plugin. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.helm_ls.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + default capabilities, with dynamicRegistration for didChangeWatchedFiles true + ``` + - `cmd` : + ```lua + { "helm_ls", "serve" } + ``` + - `filetypes` : + ```lua + { "helm" } + ``` + - `root_dir` : + ```lua + root_pattern("Chart.yaml") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## hhvm + +Language server for programs written in Hack +https://hhvm.com/ +https://github.com/facebook/hhvm +See below for how to setup HHVM & typechecker: +https://docs.hhvm.com/hhvm/getting-started/getting-started + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hhvm.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hh_client", "lsp" } + ``` + - `filetypes` : + ```lua + { "php", "hack" } + ``` + - `root_dir` : + ```lua + root_pattern(".hhconfig") + ``` + + +## hie + +https://github.com/haskell/haskell-ide-engine + +the following init_options are supported (see https://github.com/haskell/haskell-ide-engine#configuration): +```lua +init_options = { + languageServerHaskell = { + hlintOn = bool; + maxNumberOfProblems = number; + diagnosticsDebounceDuration = number; + liquidOn = bool (default false); + completionSnippetsOn = bool (default true); + formatOnImportOn = bool (default true); + formattingProvider = string (default "brittany", alternate "floskell"); + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hie.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hie-wrapper", "--lsp" } + ``` + - `filetypes` : + ```lua + { "haskell" } + ``` + - `root_dir` : + ```lua + root_pattern("stack.yaml", "package.yaml", ".git") + ``` + + +## hlasm + + `hlasm_language_server` is a language server for the High Level Assembler language used on IBM SystemZ mainframes. + + To learn how to configure the HLASM language server, see the [HLASM Language Support documentation](https://github.com/eclipse-che4z/che-che4z-lsp-for-hlasm). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hlasm.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hlasm_language_server" } + ``` + - `filetypes` : + ```lua + { "hlasm" } + ``` + - `root_dir` : + ```lua + root_pattern(".hlasmplugin") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## hls + +https://github.com/haskell/haskell-language-server + +Haskell Language Server + +If you are using HLS 1.9.0.0, enable the language server to launch on Cabal files as well: + +```lua +require('lspconfig')['hls'].setup{ + filetypes = { 'haskell', 'lhaskell', 'cabal' }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "haskell-language-server-wrapper", "--lsp" } + ``` + - `filetypes` : + ```lua + { "haskell", "lhaskell" } + ``` + - `lspinfo` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("hie.yaml", "stack.yaml", "cabal.project", "*.cabal", "package.yaml") + ``` + - `settings` : + ```lua + { + haskell = { + cabalFormattingProvider = "cabalfmt", + formattingProvider = "ormolu" + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## hoon_ls + +https://github.com/urbit/hoon-language-server + +A language server for Hoon. + +The language server can be installed via `npm install -g @hoon-language-server` + +Start a fake ~zod with `urbit -F zod`. +Start the language server at the Urbit Dojo prompt with: `|start %language-server` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hoon_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hoon-language-server" } + ``` + - `filetypes` : + ```lua + { "hoon" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## html + +https://github.com/hrsh7th/vscode-langservers-extracted + +`vscode-html-language-server` can be installed via `npm`: +```sh +npm i -g vscode-langservers-extracted +``` + +Neovim does not currently include built-in snippets. `vscode-html-language-server` only provides completions when snippet support is enabled. +To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. + +The code-formatting feature of the lsp can be controlled with the `provideFormatter` option. + +```lua +--Enable (broadcasting) snippet capability for completion +local capabilities = vim.lsp.protocol.make_client_capabilities() +capabilities.textDocument.completion.completionItem.snippetSupport = true + +require'lspconfig'.html.setup { + capabilities = capabilities, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.html.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vscode-html-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "html", "templ" } + ``` + - `init_options` : + ```lua + { + configurationSection = { "html", "css", "javascript" }, + embeddedLanguages = { + css = true, + javascript = true + }, + provideFormatter = true + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## htmx + +https://github.com/ThePrimeagen/htmx-lsp + +`htmx-lsp` can be installed via `cargo`: +```sh +cargo install htmx-lsp +``` + +Lsp is still very much work in progress and experimental. Use at your own risk. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.htmx.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "htmx-lsp" } + ``` + - `filetypes` : + ```lua + { "html", "templ" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## hydra_lsp + +https://github.com/Retsediv/hydra-lsp + +LSP for Hydra Python package config files. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hydra_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hydra-lsp" } + ``` + - `filetypes` : + ```lua + { "yaml" } + ``` + - `root_dir` : + ```lua + util.root_pattern '.git' + ``` + - `single_file_support` : + ```lua + true + ``` + + +## hyprls + +https://github.com/hyprland-community/hyprls + +`hyprls` can be installed via `go`: +```sh +go install github.com/ewen-lbh/hyprls/cmd/hyprls@latest +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hyprls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hyprls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "*.hl", "hypr*.conf", ".config/hypr/*.conf" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## idris2_lsp + +https://github.com/idris-community/idris2-lsp + +The Idris 2 language server. + +Plugins for the Idris 2 filetype include +[Idris2-Vim](https://github.com/edwinb/idris2-vim) (fewer features, stable) and +[Nvim-Idris2](https://github.com/ShinKage/nvim-idris2) (cutting-edge, +experimental). + +Idris2-Lsp requires a build of Idris 2 that includes the "Idris 2 API" package. +Package managers with known support for this build include the +[AUR](https://aur.archlinux.org/packages/idris2/) and +[Homebrew](https://formulae.brew.sh/formula/idris2#default). + +If your package manager does not support the Idris 2 API, you will need to build +Idris 2 from source. Refer to the +[the Idris 2 installation instructions](https://github.com/idris-lang/Idris2/blob/main/INSTALL.md) +for details. Steps 5 and 8 are listed as "optional" in that guide, but they are +necessary in order to make the Idris 2 API available. + +You need to install a version of Idris2-Lsp that is compatible with your +version of Idris 2. There should be a branch corresponding to every released +Idris 2 version after v0.4.0. Use the latest commit on that branch. For example, +if you have Idris v0.5.1, you should use the v0.5.1 branch of Idris2-Lsp. + +If your Idris 2 version is newer than the newest Idris2-Lsp branch, use the +latest commit on the `master` branch, and set a reminder to check the Idris2-Lsp +repo for the release of a compatible versioned branch. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.idris2_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "idris2-lsp" } + ``` + - `filetypes` : + ```lua + { "idris2" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## intelephense + +https://intelephense.com/ + +`intelephense` can be installed via `npm`: +```sh +npm install -g intelephense +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.intelephense.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "intelephense", "--stdio" } + ``` + - `filetypes` : + ```lua + { "php" } + ``` + - `root_dir` : + ```lua + root_pattern("composer.json", ".git") + ``` + + +## java_language_server + +https://github.com/georgewfraser/java-language-server + +Java language server + +Point `cmd` to `lang_server_linux.sh` or the equivalent script for macOS/Windows provided by java-language-server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.java_language_server.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "java" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## jdtls + +https://projects.eclipse.org/projects/eclipse.jdt.ls + +Language server for Java. + +IMPORTANT: If you want all the features jdtls has to offer, [nvim-jdtls](https://github.com/mfussenegger/nvim-jdtls) +is highly recommended. If all you need is diagnostics, completion, imports, gotos and formatting and some code actions +you can keep reading here. + +For manual installation you can download precompiled binaries from the +[official downloads site](http://download.eclipse.org/jdtls/snapshots/?d) +and ensure that the `PATH` variable contains the `bin` directory of the extracted archive. + +```lua + -- init.lua + require'lspconfig'.jdtls.setup{} +``` + +You can also pass extra custom jvm arguments with the JDTLS_JVM_ARGS environment variable as a space separated list of arguments, +that will be converted to multiple --jvm-arg=<param> args when passed to the jdtls script. This will allow for example tweaking +the jvm arguments or integration with external tools like lombok: + +```sh +export JDTLS_JVM_ARGS="-javaagent:$HOME/.local/share/java/lombok.jar" +``` + +For automatic installation you can use the following unofficial installers/launchers under your own risk: + - [jdtls-launcher](https://github.com/eruizc-dev/jdtls-launcher) (Includes lombok support by default) + ```lua + -- init.lua + require'lspconfig'.jdtls.setup{ cmd = { 'jdtls' } } + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jdtls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "jdtls", "-configuration", "/home/user/.cache/jdtls/config", "-data", "/home/user/.cache/jdtls/workspace" } + ``` + - `filetypes` : + ```lua + { "java" } + ``` + - `handlers` : + ```lua + { + ["language/status"] = <function 1>, + ["textDocument/codeAction"] = <function 2>, + ["textDocument/rename"] = <function 3>, + ["workspace/applyEdit"] = <function 4> + } + ``` + - `init_options` : + ```lua + { + jvm_args = {}, + workspace = "/home/user/.cache/jdtls/workspace" + } + ``` + - `root_dir` : + ```lua + { + -- Single-module projects + { + 'build.xml', -- Ant + 'pom.xml', -- Maven + 'settings.gradle', -- Gradle + 'settings.gradle.kts', -- Gradle + }, + -- Multi-module projects + { 'build.gradle', 'build.gradle.kts' }, + } or vim.fn.getcwd() + ``` + - `single_file_support` : + ```lua + true + ``` + + +## jedi_language_server + +https://github.com/pappasam/jedi-language-server + +`jedi-language-server`, a language server for Python, built on top of jedi + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jedi_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "jedi-language-server" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + vim's starting directory + ``` + - `single_file_support` : + ```lua + true + ``` + + +## jinja_lsp + +jinja-lsp enhances minijinja development experience by providing Helix/Nvim users with advanced features such as autocomplete, syntax highlighting, hover, goto definition, code actions and linting. + +The file types are not detected automatically, you can register them manually (see below) or override the filetypes: + +```lua +vim.filetype.add { + extension = { + jinja = 'jinja', + jinja2 = 'jinja', + j2 = 'jinja', + }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jinja_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "jinja-lsp" } + ``` + - `filetypes` : + ```lua + { "jinja" } + ``` + - `name` : + ```lua + "jinja_lsp" + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## jqls + +https://github.com/wader/jq-lsp +Language server for jq, written using Go. +You can install the server easily using go install: +```sh +# install directly +go install github.com/wader/jq-lsp@master +# copy binary to $PATH +cp $(go env GOPATH)/bin/jq-lsp /usr/local/bin +``` +Note: To activate properly nvim needs to know the jq filetype. +You can add it via: +```lua +vim.cmd(\[\[au BufRead,BufNewFile *.jq setfiletype jq\]\]) +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jqls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "jq-lsp" } + ``` + - `filetypes` : + ```lua + { "jq" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## jsonls + +https://github.com/hrsh7th/vscode-langservers-extracted + +vscode-json-language-server, a language server for JSON and JSON schema + +`vscode-json-language-server` can be installed via `npm`: +```sh +npm i -g vscode-langservers-extracted +``` + +Neovim does not currently include built-in snippets. `vscode-json-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. + +```lua +--Enable (broadcasting) snippet capability for completion +local capabilities = vim.lsp.protocol.make_client_capabilities() +capabilities.textDocument.completion.completionItem.snippetSupport = true + +require'lspconfig'.jsonls.setup { + capabilities = capabilities, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jsonls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vscode-json-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "json", "jsonc" } + ``` + - `init_options` : + ```lua + { + provideFormatter = true + } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## jsonnet_ls + +https://github.com/grafana/jsonnet-language-server + +A Language Server Protocol (LSP) server for Jsonnet. + +The language server can be installed with `go`: +```sh +go install github.com/grafana/jsonnet-language-server@latest +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jsonnet_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "jsonnet-language-server" } + ``` + - `filetypes` : + ```lua + { "jsonnet", "libsonnet" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("jsonnetfile.json") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## julials + +https://github.com/julia-vscode/julia-vscode + +LanguageServer.jl can be installed with `julia` and `Pkg`: +```sh +julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.add("LanguageServer")' +``` +where `~/.julia/environments/nvim-lspconfig` is the location where +the default configuration expects LanguageServer.jl to be installed. + +To update an existing install, use the following command: +```sh +julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.update()' +``` + +Note: In order to have LanguageServer.jl pick up installed packages or dependencies in a +Julia project, you must make sure that the project is instantiated: +```sh +julia --project=/path/to/my/project -e 'using Pkg; Pkg.instantiate()' +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.julials.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "julia", "--startup-file=no", "--history-file=no", "-e", ' # Load LanguageServer.jl: attempt to load from ~/.julia/environments/nvim-lspconfig\n # with the regular load path as a fallback\n ls_install_path = joinpath(\n get(DEPOT_PATH, 1, joinpath(homedir(), ".julia")),\n "environments", "nvim-lspconfig"\n )\n pushfirst!(LOAD_PATH, ls_install_path)\n using LanguageServer\n popfirst!(LOAD_PATH)\n depot_path = get(ENV, "JULIA_DEPOT_PATH", "")\n project_path = let\n dirname(something(\n ## 1. Finds an explicitly set project (JULIA_PROJECT)\n Base.load_path_expand((\n p = get(ENV, "JULIA_PROJECT", nothing);\n p === nothing ? nothing : isempty(p) ? nothing : p\n )),\n ## 2. Look for a Project.toml file in the current working directory,\n ## or parent directories, with $HOME as an upper boundary\n Base.current_project(),\n ## 3. First entry in the load path\n get(Base.load_path(), 1, nothing),\n ## 4. Fallback to default global environment,\n ## this is more or less unreachable\n Base.load_path_expand("@v#.#"),\n ))\n end\n @info "Running language server" VERSION pwd() project_path depot_path\n server = LanguageServer.LanguageServerInstance(stdin, stdout, project_path, depot_path)\n server.runlinter = true\n run(server)\n ' } + ``` + - `filetypes` : + ```lua + { "julia" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## koka + + https://koka-lang.github.io/koka/doc/index.html +Koka is a functional programming language with effect types and handlers. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.koka.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + default capabilities, with offsetEncoding utf-8 + ``` + - `cmd` : + ```lua + { "koka", "--language-server" } + ``` + - `filetypes` : + ```lua + { "kk" } + ``` + - `root_dir` : + ```lua + + ``` + - `single_file_support` : + ```lua + true + ``` + + +## kotlin_language_server + + A kotlin language server which was developed for internal usage and + released afterwards. Maintaining is not done by the original author, + but by fwcd. + + It is built via gradle and developed on github. + Source and additional description: + https://github.com/fwcd/kotlin-language-server + + This server requires vim to be aware of the kotlin-filetype. + You could refer for this capability to: + https://github.com/udalov/kotlin-vim (recommended) + Note that there is no LICENSE specified yet. + + For faster startup, you can setup caching by specifying a storagePath + in the init_options. The default is your home directory. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.kotlin_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "kotlin-language-server" } + ``` + - `filetypes` : + ```lua + { "kotlin" } + ``` + - `init_options` : + ```lua + { + storagePath = "Enables caching and use project root to store cache data. See source" + } + ``` + - `root_dir` : + ```lua + See source + ``` + + +## lean3ls + +https://github.com/leanprover/lean-client-js/tree/master/lean-language-server + +Lean installation instructions can be found +[here](https://leanprover-community.github.io/get_started.html#regular-install). + +Once Lean is installed, you can install the Lean 3 language server by running +```sh +npm install -g lean-language-server +``` + +Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim), +that plugin fully handles the setup of the Lean language server, +and you shouldn't set up `lean3ls` both with it and `lspconfig`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lean3ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lean-language-server", "--stdio", "--", "-M", "4096", "-T", "100000" } + ``` + - `filetypes` : + ```lua + { "lean3" } + ``` + - `offset_encoding` : + ```lua + "utf-32" + ``` + - `root_dir` : + ```lua + root_pattern("leanpkg.toml") or root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## leanls + +https://github.com/leanprover/lean4 + +Lean installation instructions can be found +[here](https://leanprover-community.github.io/get_started.html#regular-install). + +The Lean 4 language server is built-in with a Lean 4 install +(and can be manually run with, e.g., `lean --server`). + +Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim), +that plugin fully handles the setup of the Lean language server, +and you shouldn't set up `leanls` both with it and `lspconfig`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.leanls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lake", "serve", "--" } + ``` + - `filetypes` : + ```lua + { "lean" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `options` : + ```lua + { + no_lake_lsp_cmd = { "lean", "--server" } + } + ``` + - `root_dir` : + ```lua + root_pattern("lakefile.lean", "lean-toolchain", "leanpkg.toml", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## lelwel_ls + +https://github.com/0x2a-42/lelwel + +Language server for lelwel grammars. + +You can install `lelwel-ls` via cargo: +```sh +cargo install --features="lsp" lelwel +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lelwel_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lelwel-ls" } + ``` + - `filetypes` : + ```lua + { "llw" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## lemminx + +https://github.com/eclipse/lemminx + +The easiest way to install the server is to get a binary from https://github.com/redhat-developer/vscode-xml/releases and place it on your PATH. + +NOTE to macOS users: Binaries from unidentified developers are blocked by default. If you trust the downloaded binary, run it once, cancel the prompt, then remove the binary from Gatekeeper quarantine with `xattr -d com.apple.quarantine lemminx`. It should now run without being blocked. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lemminx.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lemminx" } + ``` + - `filetypes` : + ```lua + { "xml", "xsd", "xsl", "xslt", "svg" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## lexical + + https://github.com/lexical-lsp/lexical + + Lexical is a next-generation language server for the Elixir programming language. + + Follow the [Detailed Installation Instructions](https://github.com/lexical-lsp/lexical/blob/main/pages/installation.md) + + **By default, `lexical` doesn't have a `cmd` set.** + This is because nvim-lspconfig does not make assumptions about your path. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lexical.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "elixir", "eelixir", "heex", "surface" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ltex + +https://github.com/valentjn/ltex-ls + +LTeX Language Server: LSP language server for LanguageTool 🔍✔️ with support for LaTeX 🎓, Markdown 📝, and others + +To install, download the latest [release](https://github.com/valentjn/ltex-ls/releases) and ensure `ltex-ls` is on your path. + +This server accepts configuration via the `settings` key. + +```lua + settings = { + ltex = { + language = "en-GB", + }, + }, +``` + +To support org files or R sweave, users can define a custom filetype autocommand (or use a plugin which defines these filetypes): + +```lua +vim.cmd [[ autocmd BufRead,BufNewFile *.org set filetype=org ]] +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ltex.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ltex-ls" } + ``` + - `filetypes` : + ```lua + { "bib", "gitcommit", "markdown", "org", "plaintex", "rst", "rnoweb", "tex", "pandoc", "quarto", "rmd", "context", "html", "xhtml", "mail", "text" } + ``` + - `get_language_id` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + ltex = { + enabled = { "bibtex", "gitcommit", "markdown", "org", "tex", "restructuredtext", "rsweave", "latex", "quarto", "rmd", "context", "html", "xhtml", "mail", "plaintext" } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## lua_ls + +https://github.com/luals/lua-language-server + +Lua language server. + +`lua-language-server` can be installed by following the instructions [here](https://luals.github.io/#neovim-install). + +The default `cmd` assumes that the `lua-language-server` binary can be found in `$PATH`. + +If you primarily use `lua-language-server` for Neovim, and want to provide completions, +analysis, and location handling for plugins on runtime path, you can use the following +settings. + +```lua +require'lspconfig'.lua_ls.setup { + on_init = function(client) + local path = client.workspace_folders[1].name + if vim.loop.fs_stat(path..'/.luarc.json') or vim.loop.fs_stat(path..'/.luarc.jsonc') then + return + end + + client.config.settings.Lua = vim.tbl_deep_extend('force', client.config.settings.Lua, { + runtime = { + -- Tell the language server which version of Lua you're using + -- (most likely LuaJIT in the case of Neovim) + version = 'LuaJIT' + }, + -- Make the server aware of Neovim runtime files + workspace = { + checkThirdParty = false, + library = { + vim.env.VIMRUNTIME + -- Depending on the usage, you might want to add additional paths here. + -- "${3rd}/luv/library" + -- "${3rd}/busted/library", + } + -- or pull in all of 'runtimepath'. NOTE: this is a lot slower + -- library = vim.api.nvim_get_runtime_file("", true) + } + }) + end, + settings = { + Lua = {} + } +} +``` + +See `lua-language-server`'s [documentation](https://luals.github.io/wiki/settings/) for an explanation of the above fields: +* [Lua.runtime.path](https://luals.github.io/wiki/settings/#runtimepath) +* [Lua.workspace.library](https://luals.github.io/wiki/settings/#workspacelibrary) + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lua_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lua-language-server" } + ``` + - `filetypes` : + ```lua + { "lua" } + ``` + - `log_level` : + ```lua + 2 + ``` + - `root_dir` : + ```lua + root_pattern(".luarc.json", ".luarc.jsonc", ".luacheckrc", ".stylua.toml", "stylua.toml", "selene.toml", "selene.yml", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## luau_lsp + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.luau_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "luau-lsp", "lsp" } + ``` + - `filetypes` : + ```lua + { "luau" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + + +## lwc_ls + +https://github.com/forcedotcom/lightning-language-server/ + +Language server for Lightning Web Components. + +For manual installation, utilize the official [NPM package](https://www.npmjs.com/package/@salesforce/lwc-language-server). +Then, configure `cmd` to run the Node script at the unpacked location: + +```lua +require'lspconfig'.lwc_ls.setup { + cmd = { + 'node', + '/path/to/node_modules/@salesforce/lwc-language-server/bin/lwc-language-server.js', + '--stdio' + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lwc_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lwc-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "javascript", "html" } + ``` + - `init_options` : + ```lua + { + embeddedLanguages = { + javascript = true + } + } + ``` + - `root_dir` : + ```lua + root_pattern('sfdx-project.json') + ``` + + +## m68k + +https://github.com/grahambates/m68k-lsp + +Language server for Motorola 68000 family assembly + +`m68k-lsp-server` can be installed via `npm`: + +```sh +npm install -g m68k-lsp-server +``` + +Ensure you are using the 68k asm syntax variant in Neovim. + +```lua +vim.g.asmsyntax = 'asm68k' +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.m68k.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "m68k-lsp-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "asm68k" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## markdown_oxide + +https://github.com/Feel-ix-343/markdown-oxide + +Let's record your consciousness! Bring your own text editor! +Implemented as a language server compatible with any text +editor, Markdown-Oxide is attempting to be the best PKM +system for software enthusiasts. + +Check the readme to see how to properly setup nvim-cmp. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.markdown_oxide.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "markdown-oxide" } + ``` + - `filetypes` : + ```lua + { "markdown" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## marksman + +https://github.com/artempyanykh/marksman + +Marksman is a Markdown LSP server providing completion, cross-references, diagnostics, and more. + +Marksman works on MacOS, Linux, and Windows and is distributed as a self-contained binary for each OS. + +Pre-built binaries can be downloaded from https://github.com/artempyanykh/marksman/releases + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.marksman.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "marksman", "server" } + ``` + - `filetypes` : + ```lua + { "markdown", "markdown.mdx" } + ``` + - `root_dir` : + ```lua + root_pattern(".git", ".marksman.toml") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## matlab_ls + +https://github.com/mathworks/MATLAB-language-server + +MATLAB® language server implements the Microsoft® Language Server Protocol for the MATLAB language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.matlab_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "matlab-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "matlab" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + MATLAB = { + indexWorkspace = false, + installPath = "", + matlabConnectionTiming = "onStart", + telemetry = true + } + } + ``` + - `single_file_support` : + ```lua + false + ``` + + +## mdx_analyzer + +https://github.com/mdx-js/mdx-analyzer + +`mdx-analyzer`, a language server for MDX + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mdx_analyzer.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mdx-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "markdown.mdx" } + ``` + - `init_options` : + ```lua + { + typescript = {} + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## mesonlsp + +https://github.com/JCWasmx86/mesonlsp + +An unofficial, unendorsed language server for meson written in C++ + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mesonlsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mesonlsp", "--lsp" } + ``` + - `filetypes` : + ```lua + { "meson" } + ``` + - `root_dir` : + ```lua + util.root_pattern("meson_options.txt", "meson.options", ".git") + ``` + + +## metals + +https://scalameta.org/metals/ + +Scala language server with rich IDE features. + +See full instructions in the Metals documentation: + +https://scalameta.org/metals/docs/editors/vim#using-an-alternative-lsp-client + +Note: that if you're using [nvim-metals](https://github.com/scalameta/nvim-metals), that plugin fully handles the setup and installation of Metals, and you shouldn't set up Metals both with it and `lspconfig`. + +To install Metals, make sure to have [coursier](https://get-coursier.io/docs/cli-installation) installed, and once you do you can install the latest Metals with `cs install metals`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.metals.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + { + workspace = { + configuration = false + } + } + ``` + - `cmd` : + ```lua + { "metals" } + ``` + - `filetypes` : + ```lua + { "scala" } + ``` + - `init_options` : + ```lua + { + compilerOptions = { + snippetAutoIndent = false + }, + isHttpEnabled = true, + statusBarProvider = "show-message" + } + ``` + - `message_level` : + ```lua + 4 + ``` + - `root_dir` : + ```lua + util.root_pattern("build.sbt", "build.sc", "build.gradle", "pom.xml") + ``` + + +## millet + +https://github.com/azdavis/millet + +Millet, a language server for Standard ML + +To use with nvim: + +1. Install a Rust toolchain: https://rustup.rs +2. Clone the repo +3. Run `cargo build --release --bin lang-srv` +4. Move `target/release/lang-srv` to somewhere on your $PATH as `millet` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.millet.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "millet" } + ``` + - `filetypes` : + ```lua + { "sml" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## mint + +https://www.mint-lang.com + +Install Mint using the [instructions](https://www.mint-lang.com/install). +The language server is included since version 0.12.0. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mint.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mint", "ls" } + ``` + - `filetypes` : + ```lua + { "mint" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## mlir_lsp_server + +https://mlir.llvm.org/docs/Tools/MLIRLSP/#mlir-lsp-language-server--mlir-lsp-server= + +The Language Server for the LLVM MLIR language + +`mlir-lsp-server` can be installed at the llvm-project repository (https://github.com/llvm/llvm-project) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mlir_lsp_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mlir-lsp-server" } + ``` + - `filetypes` : + ```lua + { "mlir" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## mlir_pdll_lsp_server + +https://mlir.llvm.org/docs/Tools/MLIRLSP/#pdll-lsp-language-server--mlir-pdll-lsp-server + +The Language Server for the LLVM PDLL language + +`mlir-pdll-lsp-server` can be installed at the llvm-project repository (https://github.com/llvm/llvm-project) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mlir_pdll_lsp_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mlir-pdll-lsp-server" } + ``` + - `filetypes` : + ```lua + { "pdll" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## mm0_ls + +https://github.com/digama0/mm0 + +Language Server for the metamath-zero theorem prover. + +Requires [mm0-rs](https://github.com/digama0/mm0/tree/master/mm0-rs) to be installed +and available on the `PATH`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mm0_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mm0-rs", "server" } + ``` + - `filetypes` : + ```lua + { "metamath-zero" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## mojo + +https://github.com/modularml/mojo + +`mojo-lsp-server` can be installed [via Modular](https://developer.modular.com/download) + +Mojo is a new programming language that bridges the gap between research and production by combining Python syntax and ecosystem with systems programming and metaprogramming features. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mojo.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mojo-lsp-server" } + ``` + - `filetypes` : + ```lua + { "mojo" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## motoko_lsp + +https://github.com/dfinity/vscode-motoko + +Language server for the Motoko programming language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.motoko_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "motoko-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "motoko" } + ``` + - `init_options` : + ```lua + { + formatter = "auto" + } + ``` + - `root_dir` : + ```lua + root_pattern("dfx.json", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## move_analyzer + +https://github.com/move-language/move/tree/main/language/move-analyzer + +Language server for Move + +The `move-analyzer` can be installed by running: + +``` +cargo install --git https://github.com/move-language/move move-analyzer +``` + +See [`move-analyzer`'s doc](https://github.com/move-language/move/blob/1b258a06e3c7d2bc9174578aac92cca3ac19de71/language/move-analyzer/editors/code/README.md#how-to-install) for details. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.move_analyzer.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "move-analyzer" } + ``` + - `filetypes` : + ```lua + { "move" } + ``` + - `root_dir` : + ```lua + root_pattern("Move.toml") + ``` + + +## mutt_ls + +https://github.com/neomutt/mutt-language-server + +A language server for (neo)mutt's muttrc. It can be installed via pip. + +```sh +pip install mutt-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mutt_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mutt-language-server" } + ``` + - `filetypes` : + ```lua + { "muttrc", "neomuttrc" } + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nelua_lsp + +https://github.com/codehz/nelua-lsp + +nelua-lsp is an experimental nelua language server. + +You need [nelua.vim](https://github.com/stefanos82/nelua.vim/blob/main/ftdetect/nelua.vim) for nelua files to be recognized or add this to your config: + +in vimscript: +```vimscript +au BufNewFile,BufRead *.nelua setf nelua +``` + +in lua: +```lua +vim.api.nvim_create_autocmd({ "BufNewFile", "BufRead" }, { pattern = { "*.nelua" }, command = "setf nelua"}) +``` + +**By default, nelua-lsp doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. + +```lua +require'lspconfig'.nelua_lsp.setup { + cmd = { "nelua", "-L", "/path/to/nelua-lsp/", "--script", "/path/to/nelua-lsp/nelua-lsp.lua" }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nelua_lsp.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "nelua" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## neocmake + +https://github.com/Decodetalkers/neocmakelsp + +CMake LSP Implementation + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.neocmake.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "neocmakelsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "cmake" } + ``` + - `root_dir` : + ```lua + root_pattern('.git', 'cmake') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nextls + +https://github.com/elixir-tools/next-ls + +**By default, next-ls does not set its `cmd`. Please see the following [detailed instructions](https://www.elixir-tools.dev/docs/next-ls/installation/) for possible installation methods.** + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nextls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "elixir", "eelixir", "heex", "surface" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nginx_language_server + +https://pypi.org/project/nginx-language-server/ + +`nginx-language-server` can be installed via pip: + +```sh +pip install -U nginx-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nginx_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nginx-language-server" } + ``` + - `filetypes` : + ```lua + { "nginx" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nickel_ls + +Nickel Language Server + +https://github.com/tweag/nickel + +`nls` can be installed with nix, or cargo, from the Nickel repository. +```sh +git clone https://github.com/tweag/nickel.git +``` + +Nix: +```sh +cd nickel +nix-env -f . -i +``` + +cargo: +```sh +cd nickel/lsp/nls +cargo install --path . +``` + +In order to have lspconfig detect Nickel filetypes (a prerequisite for autostarting a server), +install the [Nickel vim plugin](https://github.com/nickel-lang/vim-nickel). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nickel_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nls" } + ``` + - `filetypes` : + ```lua + { "ncl", "nickel" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## nil_ls + +https://github.com/oxalica/nil + +A new language server for Nix Expression Language. + +If you are using Nix with Flakes support, run `nix profile install github:oxalica/nil` to install. +Check the repository README for more information. + +_See an example config at https://github.com/oxalica/nil/blob/main/dev/nvim-lsp.nix._ + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nil_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nil" } + ``` + - `filetypes` : + ```lua + { "nix" } + ``` + - `root_dir` : + ```lua + root_pattern("flake.nix", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nim_langserver + +https://github.com/nim-lang/langserver + + +`nim-langserver` can be installed via the `nimble` package manager: +```sh +nimble install nimlangserver +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nim_langserver.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nimlangserver" } + ``` + - `filetypes` : + ```lua + { "nim" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nimls + +https://github.com/PMunch/nimlsp + +`nimlsp` can be installed via the `nimble` package manager: + +```sh +nimble install nimlsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nimls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nimlsp" } + ``` + - `filetypes` : + ```lua + { "nim" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nixd + +https://github.com/nix-community/nixd + +Nix language server, based on nix libraries. + +If you are using Nix with Flakes support, run `nix profile install github:nix-community/nixd` to install. +Check the repository README for more information. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nixd.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nixd" } + ``` + - `filetypes` : + ```lua + { "nix" } + ``` + - `root_dir` : + ```lua + root_pattern("flake.nix",".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nomad_lsp + +https://github.com/juliosueiras/nomad-lsp + +Written in Go, compilation is needed for `nomad_lsp` to be used. Please see the [original repository](https://github.com/juliosuieras/nomad-lsp). + +Add the executable to your system or vim PATH and it will be set to go. + +No configuration option is needed unless you choose not to add `nomad-lsp` executable to the PATH. You should know what you are doing if you choose so. + +```lua +require('lspconfig').nomad_lsp.setup{ } +``` + +However, a `hcl.nomad` or `nomad` filetype should be defined. + +Description of your jobs should be written in `.nomad` files for the LSP client to configure the server's `root_dir` configuration option. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nomad_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nomad-lsp" } + ``` + - `filetypes` : + ```lua + { "hcl.nomad", "nomad" } + ``` + - `root_dir` : + ```lua + util.root_pattern("hcl.nomad", "nomad") + ``` + + +## ntt + +https://github.com/nokia/ntt +Installation instructions can be found [here](https://github.com/nokia/ntt#Install). +Can be configured by passing a "settings" object to `ntt.setup{}`: +```lua +require('lspconfig').ntt.setup{ + settings = { + ntt = { + } + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ntt.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ntt", "langserver" } + ``` + - `filetypes` : + ```lua + { "ttcn" } + ``` + - `root_dir` : + ```lua + util.root_pattern(".git") + ``` + + +## nushell + +https://github.com/nushell/nushell + +Nushell built-in language server. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nushell.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nu", "--lsp" } + ``` + - `filetypes` : + ```lua + { "nu" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nxls + +https://github.com/nrwl/nx-console/tree/master/apps/nxls + +nxls, a language server for Nx Workspaces + +`nxls` can be installed via `npm`: +```sh +npm i -g nxls +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nxls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nxls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "json", "jsonc" } + ``` + - `root_dir` : + ```lua + util.root_pattern + ``` + + +## ocamlls + +https://github.com/ocaml-lsp/ocaml-language-server + +`ocaml-language-server` can be installed via `npm` +```sh +npm install -g ocaml-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ocamlls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ocaml-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "ocaml", "reason" } + ``` + - `root_dir` : + ```lua + root_pattern("*.opam", "esy.json", "package.json") + ``` + + +## ocamllsp + +https://github.com/ocaml/ocaml-lsp + +`ocaml-lsp` can be installed as described in [installation guide](https://github.com/ocaml/ocaml-lsp#installation). + +To install the lsp server in a particular opam switch: +```sh +opam install ocaml-lsp-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ocamllsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ocamllsp" } + ``` + - `filetypes` : + ```lua + { "ocaml", "menhir", "ocamlinterface", "ocamllex", "reason", "dune" } + ``` + - `get_language_id` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("*.opam", "esy.json", "package.json", ".git", "dune-project", "dune-workspace") + ``` + + +## ols + + https://github.com/DanielGavin/ols + + `Odin Language Server`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ols.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ols" } + ``` + - `filetypes` : + ```lua + { "odin" } + ``` + - `root_dir` : + ```lua + util.root_pattern("ols.json", ".git", "*.odin") + ``` + + +## omnisharp + +https://github.com/omnisharp/omnisharp-roslyn +OmniSharp server based on Roslyn workspaces + +`omnisharp-roslyn` can be installed by downloading and extracting a release from [here](https://github.com/OmniSharp/omnisharp-roslyn/releases). +OmniSharp can also be built from source by following the instructions [here](https://github.com/omnisharp/omnisharp-roslyn#downloading-omnisharp). + +OmniSharp requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. + +**By default, omnisharp-roslyn doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. + +For `go_to_definition` to work fully, extended `textDocument/definition` handler is needed, for example see [omnisharp-extended-lsp.nvim](https://github.com/Hoffs/omnisharp-extended-lsp.nvim) + +```lua +require'lspconfig'.omnisharp.setup { + cmd = { "dotnet", "/path/to/omnisharp/OmniSharp.dll" }, + + settings = { + FormattingOptions = { + -- Enables support for reading code style, naming convention and analyzer + -- settings from .editorconfig. + EnableEditorConfigSupport = true, + -- Specifies whether 'using' directives should be grouped and sorted during + -- document formatting. + OrganizeImports = nil, + }, + MsBuild = { + -- If true, MSBuild project system will only load projects for files that + -- were opened in the editor. This setting is useful for big C# codebases + -- and allows for faster initialization of code navigation features only + -- for projects that are relevant to code that is being edited. With this + -- setting enabled OmniSharp may load fewer projects and may thus display + -- incomplete reference lists for symbols. + LoadProjectsOnDemand = nil, + }, + RoslynExtensionsOptions = { + -- Enables support for roslyn analyzers, code fixes and rulesets. + EnableAnalyzersSupport = nil, + -- Enables support for showing unimported types and unimported extension + -- methods in completion lists. When committed, the appropriate using + -- directive will be added at the top of the current file. This option can + -- have a negative impact on initial completion responsiveness, + -- particularly for the first few completion sessions after opening a + -- solution. + EnableImportCompletion = nil, + -- Only run analyzers against open files when 'enableRoslynAnalyzers' is + -- true + AnalyzeOpenDocumentsOnly = nil, + }, + Sdk = { + -- Specifies whether to include preview versions of the .NET SDK when + -- determining which version to use for project loading. + IncludePrereleases = true, + }, + }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.omnisharp.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "cs", "vb" } + ``` + - `init_options` : + ```lua + {} + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("*.sln", "*.csproj", "omnisharp.json", "function.json") + ``` + - `settings` : + ```lua + { + FormattingOptions = { + EnableEditorConfigSupport = true + }, + MsBuild = {}, + RoslynExtensionsOptions = {}, + Sdk = { + IncludePrereleases = true + } + } + ``` + + +## opencl_ls + +https://github.com/Galarius/opencl-language-server + +Build instructions can be found [here](https://github.com/Galarius/opencl-language-server/blob/main/_dev/build.md). + +Prebuilt binaries are available for Linux, macOS and Windows [here](https://github.com/Galarius/opencl-language-server/releases). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.opencl_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "opencl-language-server" } + ``` + - `filetypes` : + ```lua + { "opencl" } + ``` + - `root_dir` : + ```lua + util.root_pattern(".git") + ``` + + +## openedge_ls + +[Language server](https://github.com/vscode-abl/vscode-abl) for Progress OpenEdge ABL. + +For manual installation, download abl-lsp.jar from the [VSCode +extension](https://github.com/vscode-abl/vscode-abl/releases/latest). + +Configuration + +```lua +require('lspconfig').['openedge_ls'].setup { + oe_jar_path = '/path/to/abl-lsp.jar', + dlc = '12.2:/path/to/dlc-12.2', -- Version number and OpenEdge root directory (colon separator) + debug = false, -- Set to true for debug logging + trace = false -- Set to true for trace logging (REALLY verbose) +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.openedge_ls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "progress" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern('openedge-project.json') + ``` + + +## openscad_ls + +https://github.com/dzhu/openscad-language-server + +A Language Server Protocol server for OpenSCAD + +You can build and install `openscad-language-server` binary with `cargo`: +```sh +cargo install openscad-language-server +``` + +Vim does not have built-in syntax for the `openscad` filetype currently. + +This can be added via an autocmd: + +```lua +vim.cmd [[ autocmd BufRead,BufNewFile *.scad set filetype=openscad ]] +``` + +or by installing a filetype plugin such as https://github.com/sirtaj/vim-openscad + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.openscad_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "openscad-language-server" } + ``` + - `filetypes` : + ```lua + { "openscad" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## openscad_lsp + +https://github.com/Leathong/openscad-LSP + +A Language Server Protocol server for OpenSCAD + +You can build and install `openscad-lsp` binary with `cargo`: +```sh +cargo install openscad-lsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.openscad_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "openscad-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "openscad" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pact_ls + +https://github.com/kadena-io/pact-lsp + +The Pact language server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pact_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pact-lsp" } + ``` + - `filetypes` : + ```lua + { "pact" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pasls + +https://github.com/genericptr/pascal-language-server + +An LSP server implementation for Pascal variants that are supported by Free Pascal, including Object Pascal. It uses CodeTools from Lazarus as backend. + +First set `cmd` to the Pascal lsp binary. + +Customization options are passed to pasls as environment variables for example in your `.bashrc`: +```bash +export FPCDIR='/usr/lib/fpc/src' # FPC source directory (This is the only required option for the server to work). +export PP='/usr/lib/fpc/3.2.2/ppcx64' # Path to the Free Pascal compiler executable. +export LAZARUSDIR='/usr/lib/lazarus' # Path to the Lazarus sources. +export FPCTARGET='' # Target operating system for cross compiling. +export FPCTARGETCPU='x86_64' # Target CPU for cross compiling. +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pasls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pasls" } + ``` + - `filetypes` : + ```lua + { "pascal" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pbls + +https://git.sr.ht/~rrc/pbls + +Prerequisites: Ensure protoc is on your $PATH. + +`pbls` can be installed via `cargo install`: +```sh +cargo install --git https://git.sr.ht/~rrc/pbls +``` + +pbls is a Language Server for protobuf + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pbls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pbls" } + ``` + - `filetypes` : + ```lua + { "proto" } + ``` + - `root_dir` : + ```lua + root_pattern(".pbls.toml", ".git") + ``` + + +## perlls + +https://github.com/richterger/Perl-LanguageServer/tree/master/clients/vscode/perl + +`Perl-LanguageServer`, a language server for Perl. + +To use the language server, ensure that you have Perl::LanguageServer installed and perl command is on your path. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.perlls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "perl", "-MPerl::LanguageServer", "-e", "Perl::LanguageServer::run", "--", "--port 13603", "--nostdio 0" } + ``` + - `filetypes` : + ```lua + { "perl" } + ``` + - `root_dir` : + ```lua + vim's starting directory + ``` + - `settings` : + ```lua + { + perl = { + fileFilter = { ".pm", ".pl" }, + ignoreDirs = ".git", + perlCmd = "perl", + perlInc = " " + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## perlnavigator + +https://github.com/bscan/PerlNavigator + +A Perl language server. It can be installed via npm: + +```sh +npm i -g perlnavigator-server +``` + +At minimum, you will need `perl` in your path. If you want to use a non-standard `perl` you will need to set your configuration like so: +```lua +settings = { + perlnavigator = { + perlPath = '/some/odd/location/my-perl' + } +} +``` + +The `contributes.configuration.properties` section of `perlnavigator`'s `package.json` has all available configuration settings. All +settings have a reasonable default, but, at minimum, you may want to point `perlnavigator` at your `perltidy` and `perlcritic` configurations. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.perlnavigator.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "perlnavigator" } + ``` + - `filetypes` : + ```lua + { "perl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## perlpls + +https://github.com/FractalBoy/perl-language-server +https://metacpan.org/pod/PLS + +`PLS`, another language server for Perl. + +To use the language server, ensure that you have PLS installed and that it is in your path + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.perlpls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pls" } + ``` + - `filetypes` : + ```lua + { "perl" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `settings` : + ```lua + { + perl = { + perlcritic = { + enabled = false + }, + syntax = { + enabled = true + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pest_ls + +https://github.com/pest-parser/pest-ide-tools + +Language server for pest grammars. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pest_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pest-language-server" } + ``` + - `filetypes` : + ```lua + { "pest" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## phan + +https://github.com/phan/phan + +Installation: https://github.com/phan/phan#getting-started + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.phan.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "phan", "-m", "json", "--no-color", "--no-progress-bar", "-x", "-u", "-S", "--language-server-on-stdin", "--allow-polyfill-parser" } + ``` + - `filetypes` : + ```lua + { "php" } + ``` + - `root_dir` : + ```lua + root_pattern("composer.json", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## phpactor + +https://github.com/phpactor/phpactor + +Installation: https://phpactor.readthedocs.io/en/master/usage/standalone.html#global-installation + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.phpactor.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "phpactor", "language-server" } + ``` + - `filetypes` : + ```lua + { "php" } + ``` + - `root_dir` : + ```lua + root_pattern("composer.json", ".git") + ``` + + +## pico8_ls + +https://github.com/japhib/pico8-ls + +Full language support for the PICO-8 dialect of Lua. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pico8_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pico8-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "p8" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## pkgbuild_language_server + +https://github.com/Freed-Wu/pkgbuild-language-server + +Language server for ArchLinux/Windows Msys2's PKGBUILD. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pkgbuild_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pkgbuild-language-server" } + ``` + - `filetypes` : + ```lua + { "PKGBUILD" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## please + +https://github.com/thought-machine/please + +High-performance extensible build system for reproducible multi-language builds. + +The `plz` binary will automatically install the LSP for you on first run + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.please.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "plz", "tool", "lps" } + ``` + - `filetypes` : + ```lua + { "bzl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## postgres_lsp + +https://github.com/supabase/postgres_lsp + +A Language Server for Postgres + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.postgres_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "postgres_lsp" } + ``` + - `filetypes` : + ```lua + { "sql" } + ``` + - `root_dir` : + ```lua + util.root_pattern 'root-file.txt' + ``` + - `single_file_support` : + ```lua + true + ``` + + +## powershell_es + +https://github.com/PowerShell/PowerShellEditorServices + +Language server for PowerShell. + +To install, download and extract PowerShellEditorServices.zip +from the [releases](https://github.com/PowerShell/PowerShellEditorServices/releases). +To configure the language server, set the property `bundle_path` to the root +of the extracted PowerShellEditorServices.zip. + +The default configuration doesn't set `cmd` unless `bundle_path` is specified. + +```lua +require'lspconfig'.powershell_es.setup{ + bundle_path = 'c:/w/PowerShellEditorServices', +} +``` + +By default the languageserver is started in `pwsh` (PowerShell Core). This can be changed by specifying `shell`. + +```lua +require'lspconfig'.powershell_es.setup{ + bundle_path = 'c:/w/PowerShellEditorServices', + shell = 'powershell.exe', +} +``` + +Note that the execution policy needs to be set to `Unrestricted` for the languageserver run under PowerShell + +If necessary, specific `cmd` can be defined instead of `bundle_path`. +See [PowerShellEditorServices](https://github.com/PowerShell/PowerShellEditorServices#stdio) +to learn more. + +```lua +require'lspconfig'.powershell_es.setup{ + cmd = {'pwsh', '-NoLogo', '-NoProfile', '-Command', "c:/PSES/Start-EditorServices.ps1 ..."} +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.powershell_es.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "ps1" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + git root or current directory + ``` + - `shell` : + ```lua + "pwsh" + ``` + - `single_file_support` : + ```lua + true + ``` + + +## prismals + +Language Server for the Prisma JavaScript and TypeScript ORM + +`@prisma/language-server` can be installed via npm +```sh +npm install -g @prisma/language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.prismals.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "prisma-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "prisma" } + ``` + - `root_dir` : + ```lua + root_pattern(".git", "package.json") + ``` + - `settings` : + ```lua + { + prisma = { + prismaFmtBinPath = "" + } + } + ``` + + +## prolog_ls + + https://github.com/jamesnvc/lsp_server + + Language Server Protocol server for SWI-Prolog + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.prolog_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "swipl", "-g", "use_module(library(lsp_server)).", "-g", "lsp_server:main", "-t", "halt", "--", "stdio" } + ``` + - `filetypes` : + ```lua + { "prolog" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## prosemd_lsp + +https://github.com/kitten/prosemd-lsp + +An experimental LSP for Markdown. + +Please see the manual installation instructions: https://github.com/kitten/prosemd-lsp#manual-installation + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.prosemd_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "prosemd-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "markdown" } + ``` + - `root_dir` : + ```lua + <function 1> + ``` + - `single_file_support` : + ```lua + true + ``` + + +## psalm + +https://github.com/vimeo/psalm + +Can be installed with composer. +```sh +composer global require vimeo/psalm +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.psalm.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "psalm", "--language-server" } + ``` + - `filetypes` : + ```lua + { "php" } + ``` + - `root_dir` : + ```lua + root_pattern("psalm.xml", "psalm.xml.dist") + ``` + + +## puppet + +LSP server for Puppet. + +Installation: + +- Clone the editor-services repository: + https://github.com/puppetlabs/puppet-editor-services + +- Navigate into that directory and run: `bundle install` + +- Install the 'puppet-lint' gem: `gem install puppet-lint` + +- Add that repository to $PATH. + +- Ensure you can run `puppet-languageserver` from outside the editor-services directory. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.puppet.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "puppet-languageserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "puppet" } + ``` + - `root_dir` : + ```lua + root_pattern("manifests", ".puppet-lint.rc", "hiera.yaml", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## purescriptls + +https://github.com/nwolverson/purescript-language-server + +The `purescript-language-server` can be added to your project and `$PATH` via + +* JavaScript package manager such as npm, pnpm, Yarn, et al. +* Nix under the `nodePackages` and `nodePackages_latest` package sets + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.purescriptls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "purescript-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "purescript" } + ``` + - `root_dir` : + ```lua + root_pattern('bower.json', 'flake.nix', 'psc-package.json', 'shell.nix', 'spago.dhall', 'spago.yaml'), + ``` + + +## pylsp + +https://github.com/python-lsp/python-lsp-server + +A Python 3.6+ implementation of the Language Server Protocol. + +See the [project's README](https://github.com/python-lsp/python-lsp-server) for installation instructions. + +Configuration options are documented [here](https://github.com/python-lsp/python-lsp-server/blob/develop/CONFIGURATION.md). +In order to configure an option, it must be translated to a nested Lua table and included in the `settings` argument to the `setup{}` function. +For example, in order to set the `pylsp.plugins.pycodestyle.ignore` option: +```lua +require'lspconfig'.pylsp.setup{ + settings = { + pylsp = { + plugins = { + pycodestyle = { + ignore = {'W391'}, + maxLineLength = 100 + } + } + } + } +} +``` + +Note: This is a community fork of `pyls`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pylsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pylsp" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pylyzer + + https://github.com/mtshiba/pylyzer + + `pylyzer`, a fast static code analyzer & language server for Python. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pylyzer.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pylyzer", "--server" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + python = { + checkOnType = false, + diagnostics = true, + inlayHints = true, + smartCompletion = true + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pyre + +https://pyre-check.org/ + +`pyre` a static type checker for Python 3. + +`pyre` offers an extremely limited featureset. It currently only supports diagnostics, +which are triggered on save. + +Do not report issues for missing features in `pyre` to `lspconfig`. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pyre.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pyre", "persistent" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## pyright + +https://github.com/microsoft/pyright + +`pyright`, a static type checker and language server for python + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pyright.setup{} +``` +**Commands:** +- PyrightOrganizeImports: Organize Imports +- PyrightSetPythonPath: Reconfigure pyright with the provided python path + +**Default values:** + - `cmd` : + ```lua + { "pyright-langserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + python = { + analysis = { + autoSearchPaths = true, + diagnosticMode = "openFilesOnly", + useLibraryCodeForTypes = true + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## qml_lsp + +https://invent.kde.org/sdk/qml-lsp + +LSP implementation for QML (autocompletion, live linting, etc. in editors) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.qml_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "qml-lsp" } + ``` + - `filetypes` : + ```lua + { "qmljs" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## qmlls + +https://github.com/qt/qtdeclarative + +LSP implementation for QML (autocompletion, live linting, etc. in editors), + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.qmlls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "qmlls" } + ``` + - `filetypes` : + ```lua + { "qml", "qmljs" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## quick_lint_js + +https://quick-lint-js.com/ + +quick-lint-js finds bugs in JavaScript programs. + +See installation [instructions](https://quick-lint-js.com/install/) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.quick_lint_js.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "quick-lint-js", "--lsp-server" } + ``` + - `filetypes` : + ```lua + { "javascript", "typescript" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## r_language_server + +[languageserver](https://github.com/REditorSupport/languageserver) is an +implementation of the Microsoft's Language Server Protocol for the R +language. + +It is released on CRAN and can be easily installed by + +```r +install.packages("languageserver") +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.r_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "R", "--slave", "-e", "languageserver::run()" } + ``` + - `filetypes` : + ```lua + { "r", "rmd" } + ``` + - `log_level` : + ```lua + 2 + ``` + - `root_dir` : + ```lua + root_pattern(".git") or os_homedir + ``` + + +## racket_langserver + +[https://github.com/jeapostrophe/racket-langserver](https://github.com/jeapostrophe/racket-langserver) + +The Racket language server. This project seeks to use +[DrRacket](https://github.com/racket/drracket)'s public API to provide +functionality that mimics DrRacket's code tools as closely as possible. + +Install via `raco`: `raco pkg install racket-langserver` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.racket_langserver.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "racket", "--lib", "racket-langserver" } + ``` + - `filetypes` : + ```lua + { "racket", "scheme" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## raku_navigator + +https://github.com/bscan/RakuNavigator +A Raku language server +**By default, raku_navigator doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. +You have to install the language server manually. +Clone the RakuNavigator repo, install based on the [instructions](https://github.com/bscan/raku_Navigator#installation-for-other-editors), +and point `cmd` to `server.js` inside the `server/out` directory: +```lua +cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'} +``` +At minimum, you will need `raku` in your path. If you want to use a non-standard `raku` you will need to set your configuration like so: +```lua +settings = { + raku_navigator = { + rakuPath = '/some/odd/location/my-raku' + } +} +``` +The `contributes.configuration.properties` section of `raku_navigator`'s `package.json` has all available configuration settings. All +settings have a reasonable default, but, at minimum, you may want to point `raku_navigator` at your `raku_tidy` and `raku_critic` configurations. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.raku_navigator.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + {} + ``` + - `filetypes` : + ```lua + { "raku" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## reason_ls + +Reason language server + +You can install reason language server from [reason-language-server](https://github.com/jaredly/reason-language-server) repository. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.reason_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "reason-language-server" } + ``` + - `filetypes` : + ```lua + { "reason" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## regal + +https://github.com/StyraInc/regal + +A linter for Rego, with support for running as an LSP server. + +`regal` can be installed by running: +```sh +go install github.com/StyraInc/regal@latest +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.regal.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "regal", "language-server" } + ``` + - `filetypes` : + ```lua + { "rego" } + ``` + - `root_dir` : + ```lua + root_pattern("*.rego", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## regols + +https://github.com/kitagry/regols + +OPA Rego language server. + +`regols` can be installed by running: +```sh +go install github.com/kitagry/regols@latest +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.regols.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "regols" } + ``` + - `filetypes` : + ```lua + { "rego" } + ``` + - `root_dir` : + ```lua + root_pattern("*.rego", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## relay_lsp + + https://github.com/facebook/relay + `Relay` is a JavaScript framework for building data-driven React applications + + Setup: + + - Make sure you have a Relay config file somewhere in your project. + - We support standard config file formats (`.yml`, `.js`, `.json`), and the the `relay` field in your `package.json` + - Make sure you have the `relay-compiler` installed in your project. The bare minimum is v13. + - Make sure you are able to run the `relay-compiler` command from the command line. If `yarn relay-compiler` works, it's very likely that the LSP will work. + - Remove / disable any conflicting GraphQL LSPs you have installed. + + Relay LSP is a part of the Relay Compiler binary and available when adding `relay-compiler` to your project's devDependencies. + + ```lua + require'lspconfig'.relay_lsp.setup { + -- (default: false) Whether or not we should automatically start + -- the Relay Compiler in watch mode when you open a project + auto_start_compiler = false, + + + -- (default: null) Path to a relay config relative to the + -- `root_dir`. Without this, the compiler will search for your + -- config. This is helpful if your relay project is in a nested + -- directory. + path_to_config = nil, + } + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.relay_lsp.setup{} +``` + + +**Default values:** + - `auto_start_compiler` : + ```lua + false + ``` + - `cmd` : + ```lua + { "relay-compiler", "lsp" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } + ``` + - `handlers` : + ```lua + { + ["window/showStatus"] = <function 1> + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("relay.config.*", "package.json") + ``` + + +## remark_ls + +https://github.com/remarkjs/remark-language-server + +`remark-language-server` can be installed via `npm`: +```sh +npm install -g remark-language-server +``` + +`remark-language-server` uses the same +[configuration files](https://github.com/remarkjs/remark/tree/main/packages/remark-cli#example-config-files-json-yaml-js) +as `remark-cli`. + +This uses a plugin based system. Each plugin needs to be installed locally using `npm` or `yarn`. + +For example, given the following `.remarkrc.json`: + +```json +{ + "presets": [ + "remark-preset-lint-recommended" + ] +} +``` + +`remark-preset-lint-recommended` needs to be installed in the local project: + +```sh +npm install remark-preset-lint-recommended +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.remark_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "remark-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "markdown" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## rescriptls + +https://github.com/rescript-lang/rescript-vscode/tree/master/server + +ReScript Language Server can be installed via npm: +```sh +npm install -g @rescript/language-server +``` + +See the init_options supported (see https://github.com/rescript-lang/rescript-vscode/tree/master/server/config.md): + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rescriptls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rescript-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "rescript" } + ``` + - `init_options` : + ```lua + { + extensionConfiguration = { + askToStartBuild = false + } + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## rls + +https://github.com/rust-lang/rls + +rls, a language server for Rust + +See https://github.com/rust-lang/rls#setup to setup rls itself. +See https://github.com/rust-lang/rls#configuration for rls-specific settings. +All settings listed on the rls configuration section of the readme +must be set under settings.rust as follows: + +```lua +nvim_lsp.rls.setup { + settings = { + rust = { + unstable_features = true, + build_on_save = false, + all_features = true, + }, + }, +} +``` + +If you want to use rls for a particular build, eg nightly, set cmd as follows: + +```lua +cmd = {"rustup", "run", "nightly", "rls"} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rls" } + ``` + - `filetypes` : + ```lua + { "rust" } + ``` + - `root_dir` : + ```lua + root_pattern("Cargo.toml") + ``` + + +## rnix + +https://github.com/nix-community/rnix-lsp + +A language server for Nix providing basic completion and formatting via nixpkgs-fmt. + +To install manually, run `cargo install rnix-lsp`. If you are using nix, rnix-lsp is in nixpkgs. + +This server accepts configuration via the `settings` key. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rnix.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rnix-lsp" } + ``` + - `filetypes` : + ```lua + { "nix" } + ``` + - `init_options` : + ```lua + {} + ``` + - `root_dir` : + ```lua + vim's starting directory + ``` + - `settings` : + ```lua + {} + ``` + + +## robotframework_ls + +https://github.com/robocorp/robotframework-lsp + +Language Server Protocol implementation for Robot Framework. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.robotframework_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "robotframework_ls" } + ``` + - `filetypes` : + ```lua + { "robot" } + ``` + - `root_dir` : + ```lua + util.root_pattern('robotidy.toml', 'pyproject.toml', 'conda.yaml', 'robot.yaml')(fname) + or util.find_git_ancestor(fname) + ``` + + +## roc_ls + +https://github.com/roc-lang/roc/tree/main/crates/language_server#roc_language_server + +The built-in language server for the Roc programming language. +[Installation](https://github.com/roc-lang/roc/tree/main/crates/language_server#installing) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.roc_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "roc_language_server" } + ``` + - `filetypes` : + ```lua + { "roc" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## rome + +https://rome.tools + +Language server for the Rome Frontend Toolchain. + +(Unmaintained, use [Biome](https://biomejs.dev/blog/annoucing-biome) instead.) + +```sh +npm install [-g] rome +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rome.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rome", "lsp-proxy" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "json", "typescript", "typescript.tsx", "typescriptreact" } + ``` + - `root_dir` : + ```lua + root_pattern('package.json', 'node_modules', '.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## rubocop + +https://github.com/rubocop/rubocop + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rubocop.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rubocop", "--lsp" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + + +## ruby_lsp + +https://shopify.github.io/ruby-lsp/ + +This gem is an implementation of the language server protocol specification for +Ruby, used to improve editor features. + +Install the gem. There's no need to require it, since the server is used as a +standalone executable. + +```sh +group :development do + gem "ruby-lsp", require: false +end +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ruby_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ruby-lsp" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `init_options` : + ```lua + { + formatter = "auto" + } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ruff + +https://github.com/astral-sh/ruff + +A Language Server Protocol implementation for Ruff, an extremely fast Python linter and code formatter, written in Rust. It can be installed via pip. + +```sh +pip install ruff +``` + +_Requires Ruff v0.3.3 or later._ + +This is the new Rust-based version of the original `ruff-lsp` implementation. It's currently in alpha, meaning that some features are under development. Currently, the following capabilities are supported: + +1. Diagnostics +2. Code actions +3. Formatting +4. Range Formatting + +Please note that the `ruff-lsp` server will continue to be maintained until further notice. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ruff.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ruff", "server", "--preview" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ruff_lsp + +https://github.com/astral-sh/ruff-lsp + +A Language Server Protocol implementation for Ruff, an extremely fast Python linter and code transformation tool, written in Rust. It can be installed via pip. + +```sh +pip install ruff-lsp +``` + +Extra CLI arguments for `ruff` can be provided via + +```lua +require'lspconfig'.ruff_lsp.setup{ + init_options = { + settings = { + -- Any extra CLI arguments for `ruff` go here. + args = {}, + } + } +} +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ruff_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ruff-lsp" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## rune_languageserver + +https://crates.io/crates/rune-languageserver + +A language server for the [Rune](https://rune-rs.github.io/) Language, +an embeddable dynamic programming language for Rust + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rune_languageserver.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rune-languageserver" } + ``` + - `filetypes` : + ```lua + { "rune" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## rust_analyzer + +https://github.com/rust-lang/rust-analyzer + +rust-analyzer (aka rls 2.0), a language server for Rust + + +See [docs](https://github.com/rust-lang/rust-analyzer/blob/master/docs/user/generated_config.adoc) for extra settings. The settings can be used like this: +```lua +require'lspconfig'.rust_analyzer.setup{ + settings = { + ['rust-analyzer'] = { + diagnostics = { + enable = false; + } + } + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rust_analyzer.setup{} +``` +**Commands:** +- CargoReload: Reload current cargo workspace + +**Default values:** + - `capabilities` : + ```lua + { + experimental = { + serverStatusNotification = true + }, + general = { + positionEncodings = { "utf-16" } + }, + textDocument = { + callHierarchy = { + dynamicRegistration = false + }, + codeAction = { + codeActionLiteralSupport = { + codeActionKind = { + valueSet = { "", "quickfix", "refactor", "refactor.extract", "refactor.inline", "refactor.rewrite", "source", "source.organizeImports" } + } + }, + dataSupport = true, + dynamicRegistration = true, + isPreferredSupport = true, + resolveSupport = { + properties = { "edit" } + } + }, + completion = { + completionItem = { + commitCharactersSupport = false, + deprecatedSupport = false, + documentationFormat = { "markdown", "plaintext" }, + preselectSupport = false, + snippetSupport = false + }, + completionItemKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 } + }, + completionList = { + itemDefaults = { "editRange", "insertTextFormat", "insertTextMode", "data" } + }, + contextSupport = false, + dynamicRegistration = false + }, + declaration = { + linkSupport = true + }, + definition = { + dynamicRegistration = true, + linkSupport = true + }, + diagnostic = { + dynamicRegistration = false + }, + documentHighlight = { + dynamicRegistration = false + }, + documentSymbol = { + dynamicRegistration = false, + hierarchicalDocumentSymbolSupport = true, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + formatting = { + dynamicRegistration = true + }, + hover = { + contentFormat = { "markdown", "plaintext" }, + dynamicRegistration = true + }, + implementation = { + linkSupport = true + }, + inlayHint = { + dynamicRegistration = true, + resolveSupport = { + properties = { "textEdits", "tooltip", "location", "command" } + } + }, + publishDiagnostics = { + dataSupport = true, + relatedInformation = true, + tagSupport = { + valueSet = { 1, 2 } + } + }, + rangeFormatting = { + dynamicRegistration = true + }, + references = { + dynamicRegistration = false + }, + rename = { + dynamicRegistration = true, + prepareSupport = true + }, + semanticTokens = { + augmentsSyntaxTokens = true, + dynamicRegistration = false, + formats = { "relative" }, + multilineTokenSupport = false, + overlappingTokenSupport = true, + requests = { + full = { + delta = true + }, + range = false + }, + serverCancelSupport = false, + tokenModifiers = { "declaration", "definition", "readonly", "static", "deprecated", "abstract", "async", "modification", "documentation", "defaultLibrary" }, + tokenTypes = { "namespace", "type", "class", "enum", "interface", "struct", "typeParameter", "parameter", "variable", "property", "enumMember", "event", "function", "method", "macro", "keyword", "modifier", "comment", "string", "number", "regexp", "operator", "decorator" } + }, + signatureHelp = { + dynamicRegistration = false, + signatureInformation = { + activeParameterSupport = true, + documentationFormat = { "markdown", "plaintext" }, + parameterInformation = { + labelOffsetSupport = true + } + } + }, + synchronization = { + didSave = true, + dynamicRegistration = false, + willSave = true, + willSaveWaitUntil = true + }, + typeDefinition = { + linkSupport = true + } + }, + window = { + showDocument = { + support = true + }, + showMessage = { + messageActionItem = { + additionalPropertiesSupport = false + } + }, + workDoneProgress = true + }, + workspace = { + applyEdit = true, + configuration = true, + didChangeConfiguration = { + dynamicRegistration = false + }, + didChangeWatchedFiles = { + dynamicRegistration = false, + relativePatternSupport = true + }, + inlayHint = { + refreshSupport = true + }, + semanticTokens = { + refreshSupport = true + }, + symbol = { + dynamicRegistration = false, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + workspaceEdit = { + resourceOperations = { "rename", "create", "delete" } + }, + workspaceFolders = true + } + } + ``` + - `cmd` : + ```lua + { "rust-analyzer" } + ``` + - `filetypes` : + ```lua + { "rust" } + ``` + - `root_dir` : + ```lua + root_pattern("Cargo.toml", "rust-project.json") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## salt_ls + +Language server for Salt configuration files. +https://github.com/dcermak/salt-lsp + +The language server can be installed with `pip`: +```sh +pip install salt-lsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.salt_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "salt_lsp_server" } + ``` + - `filetypes` : + ```lua + { "sls" } + ``` + - `root_dir` : + ```lua + root_pattern('.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## scheme_langserver + +https://github.com/ufo5260987423/scheme-langserver +`scheme-langserver`, a language server protocol implementation for scheme. +And for nvim user, please add .sls to scheme file extension list. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.scheme_langserver.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "scheme-langserver" } + ``` + - `filetypes` : + ```lua + { "scheme" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## scry + +https://github.com/crystal-lang-tools/scry + +Crystal language server. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.scry.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "scry" } + ``` + - `filetypes` : + ```lua + { "crystal" } + ``` + - `root_dir` : + ```lua + root_pattern('shard.yml', '.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## serve_d + + https://github.com/Pure-D/serve-d + + `Microsoft language server protocol implementation for D using workspace-d.` + Download a binary from https://github.com/Pure-D/serve-d/releases and put it in your $PATH. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.serve_d.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "serve-d" } + ``` + - `filetypes` : + ```lua + { "d" } + ``` + - `root_dir` : + ```lua + util.root_pattern("dub.json", "dub.sdl", ".git") + ``` + + +## shopify_theme_ls + +https://shopify.dev/docs/api/shopify-cli + +[Language Server](https://shopify.dev/docs/themes/tools/cli/language-server) and Theme Check (linter) for Shopify themes. + +`shopify` can be installed via npm `npm install -g @shopify/cli`. + +```lua +require lspconfig.shopify_theme_ls.setup {} +``` + +Note: This LSP already includes Theme Check so you don't need to use the `theme_check` server configuration as well. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.shopify_theme_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "shopify", "theme", "language-server" } + ``` + - `filetypes` : + ```lua + { "liquid" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## sixtyfps + +https://github.com/sixtyfpsui/sixtyfps +`SixtyFPS`'s language server + +You can build and install `sixtyfps-lsp` binary with `cargo`: +```sh +cargo install sixtyfps-lsp +``` + +Vim does not have built-in syntax for the `sixtyfps` filetype currently. + +This can be added via an autocmd: + +```lua +vim.cmd [[ autocmd BufRead,BufNewFile *.60 set filetype=sixtyfps ]] +``` + +or by installing a filetype plugin such as https://github.com/RustemB/sixtyfps-vim + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sixtyfps.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "sixtyfps-lsp" } + ``` + - `filetypes` : + ```lua + { "sixtyfps" } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## slangd + +https://github.com/shader-slang/slang + +The `slangd` binary can be downloaded as part of [slang releases](https://github.com/shader-slang/slang/releases) or +by [building `slang` from source](https://github.com/shader-slang/slang/blob/master/docs/building.md). + +The server can be configured by passing a "settings" object to `slangd.setup{}`: + +```lua +require('lspconfig').slangd.setup{ + settings = { + slang = { + predefinedMacros = {"MY_VALUE_MACRO=1"}, + inlayHints = { + deducedTypes = true, + parameterNames = true, + } + } + } +} +``` +Available options are documented [here](https://github.com/shader-slang/slang-vscode-extension/tree/main?tab=readme-ov-file#configurations) +or in more detail [here](https://github.com/shader-slang/slang-vscode-extension/blob/main/package.json#L70). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.slangd.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "slangd" } + ``` + - `filetypes` : + ```lua + { "hlsl", "shaderslang" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## slint_lsp + +https://github.com/slint-ui/slint +`Slint`'s language server + +You can build and install `slint-lsp` binary with `cargo`: +```sh +cargo install slint-lsp +``` + +Vim does not have built-in syntax for the `slint` filetype at this time. + +This can be added via an autocmd: + +```lua +vim.cmd [[ autocmd BufRead,BufNewFile *.slint set filetype=slint ]] +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.slint_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "slint-lsp" } + ``` + - `filetypes` : + ```lua + { "slint" } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## smarty_ls + +https://github.com/landeaux/vscode-smarty-langserver-extracted + +Language server for Smarty. + +`smarty-language-server` can be installed via `npm`: + +```sh +npm i -g vscode-smarty-langserver-extracted +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.smarty_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "smarty-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "smarty" } + ``` + - `init_options` : + ```lua + {} + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + css = { + validate = true + }, + smarty = { + pluginDirs = {} + } + } + ``` + + +## smithy_ls + +https://github.com/awslabs/smithy-language-server + +`Smithy Language Server`, A Language Server Protocol implementation for the Smithy IDL + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.smithy_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "smithy-language-server", "0" } + ``` + - `filetypes` : + ```lua + { "smithy" } + ``` + - `root_dir` : + ```lua + root_pattern("smithy-build.json", "build.gradle", "build.gradle.kts", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## snyk_ls + +https://github.com/snyk/snyk-ls + +LSP for Snyk Open Source, Snyk Infrastructure as Code, and Snyk Code. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.snyk_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "snyk-ls" } + ``` + - `filetypes` : + ```lua + { "go", "gomod", "javascript", "typescript", "json", "python", "requirements", "helm", "yaml", "terraform", "terraform-vars" } + ``` + - `init_options` : + ```lua + Configuration from https://github.com/snyk/snyk-ls#configuration-1 + ``` + - `root_dir` : + ```lua + root_pattern(".git", ".snyk") + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## solang + +A language server for Solidity + +See the [documentation](https://solang.readthedocs.io/en/latest/installing.html) for installation instructions. + +The language server only provides the following capabilities: +* Syntax highlighting +* Diagnostics +* Hover + +There is currently no support for completion, goto definition, references, or other functionality. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solang.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "solang", "language-server", "--target", "evm" } + ``` + - `filetypes` : + ```lua + { "solidity" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## solargraph + +https://solargraph.org/ + +solargraph, a language server for Ruby + +You can install solargraph via gem install. + +```sh +gem install --user-install solargraph +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solargraph.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "solargraph", "stdio" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `init_options` : + ```lua + { + formatting = true + } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + - `settings` : + ```lua + { + solargraph = { + diagnostics = true + } + } + ``` + + +## solc + +https://docs.soliditylang.org/en/latest/installing-solidity.html + +solc is the native language server for the Solidity language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solc.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "solc", "--lsp" } + ``` + - `filetypes` : + ```lua + { "solidity" } + ``` + - `root_dir` : + ```lua + root_pattern('hardhat.config.*', '.git') + ``` + + +## solidity + +https://github.com/qiuxiang/solidity-ls + +npm i solidity-ls -g + +Make sure that solc is installed and it's the same version of the file. solc-select is recommended. + +Solidity language server is a LSP with autocomplete, go to definition and diagnostics. + +If you use brownie, use this root_dir: +root_dir = util.root_pattern('brownie-config.yaml', '.git') + +on includePath, you can add an extra path to search for external libs, on remapping you can remap lib <> path, like: + +```lua +{ solidity = { includePath = '/Users/your_user/.brownie/packages/', remapping = { ["@OpenZeppelin/"] = 'OpenZeppelin/openzeppelin-contracts@4.6.0/' } } } +``` + +**For brownie users** +Change the root_dir to: + +```lua +root_pattern("brownie-config.yaml", ".git") +``` + +The best way of using it is to have a package.json in your project folder with the packages that you will use. +After installing with package.json, just create a `remappings.txt` with: + +``` +@OpenZeppelin/=node_modules/OpenZeppelin/openzeppelin-contracts@4.6.0/ +``` + +You can omit the node_modules as well. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solidity.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "solidity-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "solidity" } + ``` + - `root_dir` : + ```lua + root_pattern("package.json", ".git") + ``` + - `settings` : + ```lua + { + solidity = { + includePath = "", + remapping = {} + } + } + ``` + + +## solidity_ls + +https://github.com/juanfranblanco/vscode-solidity + +`vscode-solidity-server` can be installed via `npm`: + +```sh +npm install -g vscode-solidity-server +``` + +`vscode-solidity-server` is a language server for the Solidity language ported from the VSCode "solidity" extension. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solidity_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vscode-solidity-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "solidity" } + ``` + - `root_dir` : + ```lua + root_pattern("hardhat.config.js", "hardhat.config.ts", "foundry.toml", "remappings.txt", "truffle.js", "truffle-config.js", "ape-config.yaml", ".git", "package.json") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## solidity_ls_nomicfoundation + +https://github.com/NomicFoundation/hardhat-vscode/blob/development/server/README.md + +`nomicfoundation-solidity-language-server` can be installed via `npm`: + +```sh +npm install -g @nomicfoundation/solidity-language-server +``` + +A language server for the Solidity programming language, built by the Nomic Foundation for the Ethereum community. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solidity_ls_nomicfoundation.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nomicfoundation-solidity-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "solidity" } + ``` + - `root_dir` : + ```lua + root_pattern("hardhat.config.js", "hardhat.config.ts", "foundry.toml", "remappings.txt", "truffle.js", "truffle-config.js", "ape-config.yaml", ".git", "package.json") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## somesass_ls + + +https://github.com/wkillerud/some-sass/tree/main/packages/language-server + +`some-sass-language-server` can be installed via `npm`: + +```sh +npm i -g some-sass-language-server +``` + +The language server provides: + +- Full support for @use and @forward, including aliases, prefixes and hiding. +- Workspace-wide code navigation and refactoring, such as Rename Symbol. +- Rich documentation through SassDoc. +- Language features for %placeholder-selectors, both when using them and writing them. +- Suggestions and hover info for built-in Sass modules, when used with @use. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.somesass_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "some-sass-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "scss", "sass" } + ``` + - `name` : + ```lua + "somesass_ls" + ``` + - `root_dir` : + ```lua + root_pattern("package.json", ".git") or bufdir + ``` + - `settings` : + ```lua + { + somesass = { + suggestAllFromOpenDocument = true + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## sorbet + +https://sorbet.org + +Sorbet is a fast, powerful type checker designed for Ruby. + +You can install Sorbet via gem install. You might also be interested in how to set +Sorbet up for new projects: https://sorbet.org/docs/adopting. + +```sh +gem install sorbet +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sorbet.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "srb", "tc", "--lsp" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + + +## sourcekit + +https://github.com/apple/sourcekit-lsp + +Language server for Swift and C/C++/Objective-C. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sourcekit.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "sourcekit-lsp" } + ``` + - `filetypes` : + ```lua + { "swift", "c", "cpp", "objective-c", "objective-cpp" } + ``` + - `root_dir` : + ```lua + root_pattern("buildServer.json", "*.xcodeproj", "*.xcworkspace", ".git", "compile_commands.json", "Package.swift") + ``` + + +## sourcery + +https://github.com/sourcery-ai/sourcery + +Refactor Python instantly using the power of AI. + +It requires the init_options param to be populated as shown below and will respond with the list of ServerCapabilities that it supports: + +```lua +require'lspconfig'.sourcery.setup { + init_options = { + --- The Sourcery token for authenticating the user. + --- This is retrieved from the Sourcery website and must be + --- provided by each user. The extension must provide a + --- configuration option for the user to provide this value. + token = <YOUR_TOKEN>, + + --- The extension's name and version as defined by the extension. + extension_version = 'vim.lsp', + + --- The editor's name and version as defined by the editor. + editor_version = 'vim', + }, +} +``` + +Alternatively, you can login to sourcery by running `sourcery login` with sourcery-cli. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sourcery.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "sourcery", "lsp" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "python", "typescript", "typescriptreact" } + ``` + - `init_options` : + ```lua + { + editor_version = "vim", + extension_version = "vim.lsp" + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## spectral + +https://github.com/luizcorreia/spectral-language-server + `A flexible JSON/YAML linter for creating automated style guides, with baked in support for OpenAPI v2 & v3.` + +`spectral-language-server` can be installed via `npm`: +```sh +npm i -g spectral-language-server +``` +See [vscode-spectral](https://github.com/stoplightio/vscode-spectral#extension-settings) for configuration options. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.spectral.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "spectral-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "yaml", "json", "yml" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + enable = true, + run = "onType", + validateLanguages = { "yaml", "json", "yml" } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## spyglassmc_language_server + +https://github.com/SpyglassMC/Spyglass/tree/main/packages/language-server + +Language server for Minecraft datapacks. + +`spyglassmc-language-server` can be installed via `npm`: + +```sh +npm i -g @spyglassmc/language-server +``` + +You may also need to configure the filetype: + +`autocmd BufNewFile,BufRead *.mcfunction set filetype=mcfunction` + +This is automatically done by [CrystalAlpha358/vim-mcfunction](https://github.com/CrystalAlpha358/vim-mcfunction), which also provide syntax highlight. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.spyglassmc_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "spyglassmc-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "mcfunction" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## sqlls + +https://github.com/joe-re/sql-language-server + +This LSP can be installed via `npm`. Find further instructions on manual installation of the sql-language-server at [joe-re/sql-language-server](https://github.com/joe-re/sql-language-server). +<br> + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sqlls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "sql-language-server", "up", "--method", "stdio" } + ``` + - `filetypes` : + ```lua + { "sql", "mysql" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## sqls + +https://github.com/sqls-server/sqls + +```lua +require'lspconfig'.sqls.setup{ + cmd = {"path/to/command", "-config", "path/to/config.yml"}; + ... +} +``` +Sqls can be installed via `go get github.com/sqls-server/sqls`. Instructions for compiling Sqls from the source can be found at [sqls-server/sqls](https://github.com/sqls-server/sqls). + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sqls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "sqls" } + ``` + - `filetypes` : + ```lua + { "sql", "mysql" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## standardrb + +https://github.com/testdouble/standard + +Ruby Style Guide, with linter & automatic code fixer. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.standardrb.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "standardrb", "--lsp" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + + +## starlark_rust + +https://github.com/facebookexperimental/starlark-rust/ +The LSP part of `starlark-rust` is not currently documented, + but the implementation works well for linting. +This gives valuable warnings for potential issues in the code, +but does not support refactorings. + +It can be installed with cargo: https://crates.io/crates/starlark + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.starlark_rust.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "starlark", "--lsp" } + ``` + - `filetypes` : + ```lua + { "star", "bzl", "BUILD.bazel" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## starpls + +https://github.com/withered-magic/starpls + +`starpls` is an LSP implementation for Starlark. Installation instructions can be found in the project's README. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.starpls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "starpls" } + ``` + - `filetypes` : + ```lua + { "bzl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## statix + +https://github.com/nerdypepper/statix + +lints and suggestions for the nix programming language + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.statix.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "statix" } + ``` + - `filetypes` : + ```lua + { "nix" } + ``` + - `root_dir` : + ```lua + root_pattern("flake.nix", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## steep + +https://github.com/soutaro/steep + +`steep` is a static type checker for Ruby. + +You need `Steepfile` to make it work. Generate it with `steep init`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.steep.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "steep", "langserver" } + ``` + - `filetypes` : + ```lua + { "ruby", "eruby" } + ``` + - `root_dir` : + ```lua + root_pattern("Steepfile", ".git") + ``` + + +## stimulus_ls + +https://www.npmjs.com/package/stimulus-language-server + +`stimulus-lsp` can be installed via `npm`: + +```sh +npm install -g stimulus-language-server +``` + +or via `yarn`: + +```sh +yarn global add stimulus-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.stimulus_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "stimulus-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "html", "ruby", "eruby", "blade", "php" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## stylelint_lsp + +https://github.com/bmatcuk/stylelint-lsp + +`stylelint-lsp` can be installed via `npm`: + +```sh +npm i -g stylelint-lsp +``` + +Can be configured by passing a `settings.stylelintplus` object to `stylelint_lsp.setup`: + +```lua +require'lspconfig'.stylelint_lsp.setup{ + settings = { + stylelintplus = { + -- see available options in stylelint-lsp documentation + } + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.stylelint_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "stylelint-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "css", "less", "scss", "sugarss", "vue", "wxss", "javascript", "javascriptreact", "typescript", "typescriptreact" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## svelte + +https://github.com/sveltejs/language-tools/tree/master/packages/language-server + +Note: assuming that [tsserver](#tsserver) is setup, full JavaScript/TypeScript support (find references, rename, etc of symbols in Svelte files when working in JS/TS files) requires per-project installation and configuration of [typescript-svelte-plugin](https://github.com/sveltejs/language-tools/tree/master/packages/typescript-plugin#usage). + +`svelte-language-server` can be installed via `npm`: +```sh +npm install -g svelte-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.svelte.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "svelteserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "svelte" } + ``` + - `root_dir` : + ```lua + root_pattern("package.json", ".git") + ``` + + +## svlangserver + +https://github.com/imc-trading/svlangserver + +Language server for SystemVerilog. + +`svlangserver` can be installed via `npm`: + +```sh +$ npm install -g @imc-trading/svlangserver +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.svlangserver.setup{} +``` +**Commands:** +- SvlangserverBuildIndex: Instructs language server to rerun indexing +- SvlangserverReportHierarchy: Generates hierarchy for the given module + +**Default values:** + - `cmd` : + ```lua + { "svlangserver" } + ``` + - `filetypes` : + ```lua + { "verilog", "systemverilog" } + ``` + - `root_dir` : + ```lua + root_pattern(".svlangserver", ".git") + ``` + - `settings` : + ```lua + { + systemverilog = { + includeIndexing = { "*.{v,vh,sv,svh}", "**/*.{v,vh,sv,svh}" } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## svls + +https://github.com/dalance/svls + +Language server for verilog and SystemVerilog + +`svls` can be installed via `cargo`: + ```sh + cargo install svls + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.svls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "svls" } + ``` + - `filetypes` : + ```lua + { "verilog", "systemverilog" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## swift_mesonls + +https://github.com/JCWasmx86/Swift-MesonLSP + +Meson language server written in Swift + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.swift_mesonls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "Swift-MesonLSP", "--lsp" } + ``` + - `filetypes` : + ```lua + { "meson" } + ``` + - `root_dir` : + ```lua + util.root_pattern("meson_options.txt", "meson.options", ".git") + ``` + + +## syntax_tree + +https://ruby-syntax-tree.github.io/syntax_tree/ + +A fast Ruby parser and formatter. + +Syntax Tree is a suite of tools built on top of the internal CRuby parser. It +provides the ability to generate a syntax tree from source, as well as the +tools necessary to inspect and manipulate that syntax tree. It can be used to +build formatters, linters, language servers, and more. + +```sh +gem install syntax_tree +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.syntax_tree.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "stree", "lsp" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `root_dir` : + ```lua + root_pattern(".streerc", "Gemfile", ".git") + ``` + + +## tabby_ml + +https://tabby.tabbyml.com/blog/running-tabby-as-a-language-server + +Language server for Tabby, an opensource, self-hosted AI coding assistant. + +`tabby-agent` can be installed via `npm`: + +```sh +npm install --global tabby-agent +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tabby_ml.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tabby-agent", "--lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + {} + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## tailwindcss + +https://github.com/tailwindlabs/tailwindcss-intellisense + +Tailwind CSS Language Server can be installed via npm: +```sh +npm install -g @tailwindcss/language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tailwindcss.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tailwindcss-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "aspnetcorerazor", "astro", "astro-markdown", "blade", "clojure", "django-html", "htmldjango", "edge", "eelixir", "elixir", "ejs", "erb", "eruby", "gohtml", "gohtmltmpl", "haml", "handlebars", "hbs", "html", "html-eex", "heex", "jade", "leaf", "liquid", "markdown", "mdx", "mustache", "njk", "nunjucks", "php", "razor", "slim", "twig", "css", "less", "postcss", "sass", "scss", "stylus", "sugarss", "javascript", "javascriptreact", "reason", "rescript", "typescript", "typescriptreact", "vue", "svelte", "templ" } + ``` + - `init_options` : + ```lua + { + userLanguages = { + eelixir = "html-eex", + eruby = "erb", + templ = "html" + } + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern('tailwind.config.js', 'tailwind.config.cjs', 'tailwind.config.mjs', 'tailwind.config.ts', 'postcss.config.js', 'postcss.config.cjs', 'postcss.config.mjs', 'postcss.config.ts', 'package.json', 'node_modules', '.git') + ``` + - `settings` : + ```lua + { + tailwindCSS = { + classAttributes = { "class", "className", "class:list", "classList", "ngClass" }, + lint = { + cssConflict = "warning", + invalidApply = "error", + invalidConfigPath = "error", + invalidScreen = "error", + invalidTailwindDirective = "error", + invalidVariant = "error", + recommendedVariantOrder = "warning" + }, + validate = true + } + } + ``` + + +## taplo + +https://taplo.tamasfe.dev/cli/usage/language-server.html + +Language server for Taplo, a TOML toolkit. + +`taplo-cli` can be installed via `cargo`: +```sh +cargo install --features lsp --locked taplo-cli +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.taplo.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "taplo", "lsp", "stdio" } + ``` + - `filetypes` : + ```lua + { "toml" } + ``` + - `root_dir` : + ```lua + root_pattern("*.toml", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## tblgen_lsp_server + +https://mlir.llvm.org/docs/Tools/MLIRLSP/#tablegen-lsp-language-server--tblgen-lsp-server + +The Language Server for the LLVM TableGen language + +`tblgen-lsp-server` can be installed at the llvm-project repository (https://github.com/llvm/llvm-project) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tblgen_lsp_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tblgen-lsp-server" } + ``` + - `filetypes` : + ```lua + { "tablegen" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## teal_ls + +https://github.com/teal-language/teal-language-server + +Install with: +``` +luarocks install --dev teal-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.teal_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "teal-language-server" } + ``` + - `filetypes` : + ```lua + { "teal" } + ``` + - `root_dir` : + ```lua + root_pattern("tlconfig.lua", ".git") + ``` + + +## templ + +https://templ.guide + +The official language server for the templ HTML templating language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.templ.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "templ", "lsp" } + ``` + - `filetypes` : + ```lua + { "templ" } + ``` + - `root_dir` : + ```lua + root_pattern('go.work', 'go.mod', '.git') + ``` + + +## terraform_lsp + +https://github.com/juliosueiras/terraform-lsp + +Terraform language server +Download a released binary from +https://github.com/juliosueiras/terraform-lsp/releases. + +From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp: + +Both HashiCorp and the maintainer of terraform-lsp expressed interest in +collaborating on a language server and are working towards a _long-term_ +goal of a single stable and feature-complete implementation. + +For the time being both projects continue to exist, giving users the +choice: + +- `terraform-ls` providing + - overall stability (by relying only on public APIs) + - compatibility with any provider and any Terraform >=0.12.0 currently + less features + - due to project being younger and relying on public APIs which may + not offer the same functionality yet + +- `terraform-lsp` providing + - currently more features + - compatibility with a single particular Terraform (0.12.20 at time of writing) + - configs designed for other 0.12 versions may work, but interpretation may be inaccurate + - less stability (due to reliance on Terraform's own internal packages) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.terraform_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "terraform-lsp" } + ``` + - `filetypes` : + ```lua + { "terraform", "hcl" } + ``` + - `root_dir` : + ```lua + root_pattern(".terraform", ".git") + ``` + + +## terraformls + +https://github.com/hashicorp/terraform-ls + +Terraform language server +Download a released binary from https://github.com/hashicorp/terraform-ls/releases. + +From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp: + +Both HashiCorp and the maintainer of terraform-lsp expressed interest in +collaborating on a language server and are working towards a _long-term_ +goal of a single stable and feature-complete implementation. + +For the time being both projects continue to exist, giving users the +choice: + +- `terraform-ls` providing + - overall stability (by relying only on public APIs) + - compatibility with any provider and any Terraform >=0.12.0 currently + less features + - due to project being younger and relying on public APIs which may + not offer the same functionality yet + +- `terraform-lsp` providing + - currently more features + - compatibility with a single particular Terraform (0.12.20 at time of writing) + - configs designed for other 0.12 versions may work, but interpretation may be inaccurate + - less stability (due to reliance on Terraform's own internal packages) + +Note, that the `settings` configuration option uses the `workspace/didChangeConfiguration` event, +[which is not supported by terraform-ls](https://github.com/hashicorp/terraform-ls/blob/main/docs/features.md). +Instead you should use `init_options` which passes the settings as part of the LSP initialize call +[as is required by terraform-ls](https://github.com/hashicorp/terraform-ls/blob/main/docs/SETTINGS.md#how-to-pass-settings). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.terraformls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "terraform-ls", "serve" } + ``` + - `filetypes` : + ```lua + { "terraform", "terraform-vars" } + ``` + - `root_dir` : + ```lua + root_pattern(".terraform", ".git") + ``` + + +## texlab + +https://github.com/latex-lsp/texlab + +A completion engine built from scratch for (La)TeX. + +See https://github.com/latex-lsp/texlab/wiki/Configuration for configuration options. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.texlab.setup{} +``` +**Commands:** +- TexlabBuild: Build the current buffer +- TexlabForward: Forward search from current position + +**Default values:** + - `cmd` : + ```lua + { "texlab" } + ``` + - `filetypes` : + ```lua + { "tex", "plaintex", "bib" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + texlab = { + auxDirectory = ".", + bibtexFormatter = "texlab", + build = { + args = { "-pdf", "-interaction=nonstopmode", "-synctex=1", "%f" }, + executable = "latexmk", + forwardSearchAfter = false, + onSave = false + }, + chktex = { + onEdit = false, + onOpenAndSave = false + }, + diagnosticsDelay = 300, + formatterLineLength = 80, + forwardSearch = { + args = {} + }, + latexFormatter = "latexindent", + latexindent = { + modifyLineBreaks = false + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## textlsp + +https://github.com/hangyav/textLSP + +`textLSP` is an LSP server for text spell and grammar checking with various AI tools. +It supports multiple text file formats, such as LaTeX, Org or txt. + +For the available text analyzer tools and their configuration, see the [GitHub](https://github.com/hangyav/textLSP) page. +By default, all analyzers are disabled in textLSP, since most of them need special settings. +For quick testing, LanguageTool is enabled in the default `nvim-lspconfig` configuration. + +To install run: `pip install textLSP` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.textlsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "textlsp" } + ``` + - `filetypes` : + ```lua + { "text", "tex", "org" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + textLSP = { + analysers = { + languagetool = { + check_text = { + on_change = false, + on_open = true, + on_save = true + }, + enabled = true + } + }, + documents = { + org = { + org_todo_keywords = { "TODO", "IN_PROGRESS", "DONE" } + } + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## tflint + +https://github.com/terraform-linters/tflint + +A pluggable Terraform linter that can act as lsp server. +Installation instructions can be found in https://github.com/terraform-linters/tflint#installation. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tflint.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tflint", "--langserver" } + ``` + - `filetypes` : + ```lua + { "terraform" } + ``` + - `root_dir` : + ```lua + root_pattern(".terraform", ".git", ".tflint.hcl") + ``` + + +## theme_check + +https://github.com/Shopify/shopify-cli + +`theme-check-language-server` is bundled with `shopify-cli` or it can also be installed via + +https://github.com/Shopify/theme-check#installation + +**NOTE:** +If installed via Homebrew, `cmd` must be set to 'theme-check-liquid-server' + +```lua +require lspconfig.theme_check.setup { + cmd = { 'theme-check-liquid-server' } +} +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.theme_check.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "theme-check-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "liquid" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## thriftls + +https://github.com/joyme123/thrift-ls + +you can install thriftls by mason or download binary here: https://github.com/joyme123/thrift-ls/releases + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.thriftls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "thriftls" } + ``` + - `filetypes` : + ```lua + { "thrift" } + ``` + - `root_dir` : + ```lua + root_pattern(".thrift") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## tilt_ls + +https://github.com/tilt-dev/tilt + +Tilt language server. + +You might need to add filetype detection manually: + +```vim +autocmd BufRead Tiltfile setf=tiltfile +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tilt_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tilt", "lsp", "start" } + ``` + - `filetypes` : + ```lua + { "tiltfile" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## tinymist + +https://github.com/Myriad-Dreamin/tinymist +An integrated language service for Typst [taɪpst]. You can also call it "微霭" [wēi ǎi] in Chinese. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tinymist.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tinymist" } + ``` + - `filetypes` : + ```lua + { "typst" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + false + ``` + + +## tsp_server + +https://github.com/microsoft/typespec + +The language server for TypeSpec, a language for defining cloud service APIs and shapes. + +`tsp-server` can be installed together with the typespec compiler via `npm`: +```sh +npm install -g @typespec/compiler +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tsp_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tsp-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "typespec" } + ``` + - `root_dir` : + ```lua + util.root_pattern("tspconfig.yaml", ".git") + ``` + + +## tsserver + +https://github.com/typescript-language-server/typescript-language-server + +`typescript-language-server` depends on `typescript`. Both packages can be installed via `npm`: +```sh +npm install -g typescript typescript-language-server +``` + +To configure typescript language server, add a +[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or +[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your +project. + +Here's an example that disables type checking in JavaScript files. + +```json +{ + "compilerOptions": { + "module": "commonjs", + "target": "es6", + "checkJs": false + }, + "exclude": [ + "node_modules" + ] +} +``` + +### Vue support + +As of 2.0.0, Volar no longer supports TypeScript itself. Instead, a plugin +adds Vue support to this language server. + +*IMPORTANT*: It is crucial to ensure that `@vue/typescript-plugin` and `volar `are of identical versions. + +```lua +require'lspconfig'.tsserver.setup{ + init_options = { + plugins = { + { + name = "@vue/typescript-plugin", + location = "/usr/local/lib/node_modules/@vue/typescript-plugin", + languages = {"javascript", "typescript", "vue"}, + }, + }, + }, + filetypes = { + "javascript", + "typescript", + "vue", + }, +} + +-- You must make sure volar is setup +-- e.g. require'lspconfig'.volar.setup{} +-- See volar's section for more information +``` + +`location` MUST be defined. If the plugin is installed in `node_modules`, +`location` can have any value. + +`languages` must include `vue` even if it is listed in `filetypes`. + +`filetypes` is extended here to include Vue SFC. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tsserver.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "typescript-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } + ``` + - `init_options` : + ```lua + { + hostInfo = "neovim" + } + ``` + - `root_dir` : + ```lua + root_pattern("tsconfig.json", "package.json", "jsconfig.json", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ttags + +https://github.com/npezza93/ttags + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ttags.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ttags", "lsp" } + ``` + - `filetypes` : + ```lua + { "ruby", "rust", "javascript", "haskell" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + + +## turtle_ls + +https://github.com/stardog-union/stardog-language-servers/tree/master/packages/turtle-language-server +`turtle-language-server`, An editor-agnostic server providing language intelligence (diagnostics, hover tooltips, etc.) for the W3C standard Turtle RDF syntax via the Language Server Protocol. +installable via npm install -g turtle-language-server or yarn global add turtle-language-server. +requires node. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.turtle_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "node", + [3] = "--stdio" + } + ``` + - `filetypes` : + ```lua + { "turtle", "ttl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## twiggy_language_server + +https://github.com/moetelo/twiggy + +`twiggy-language-server` can be installed via `npm`: +```sh +npm install -g twiggy-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.twiggy_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "twiggy-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "twig" } + ``` + - `root_dir` : + ```lua + root_pattern("composer.json", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## typeprof + +https://github.com/ruby/typeprof + +`typeprof` is the built-in analysis and LSP tool for Ruby 3.1+. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.typeprof.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "typeprof", "--lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "ruby", "eruby" } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + + +## typos_lsp + +https://github.com/crate-ci/typos +https://github.com/tekumara/typos-lsp + +A Language Server Protocol implementation for Typos, a low false-positive +source code spell checker, written in Rust. Download it from the releases page +on GitHub: https://github.com/tekumara/typos-lsp/releases + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.typos_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "typos-lsp" } + ``` + - `filetypes` : + ```lua + { "*" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## typst_lsp + +https://github.com/nvarner/typst-lsp + +Language server for Typst. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.typst_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "typst-lsp" } + ``` + - `filetypes` : + ```lua + { "typst" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## uiua + +https://github.com/uiua-lang/uiua/ + +The builtin language server of the Uiua interpreter. + +The Uiua interpreter can be installed with `cargo install uiua` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.uiua.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "uiua", "lsp" } + ``` + - `filetypes` : + ```lua + { "uiua" } + ``` + - `root_dir` : + ```lua + root_pattern( + 'main.ua', + 'fmt.ua', + '.git' + ) + + ``` + + +## unison + +https://github.com/unisonweb/unison/blob/trunk/docs/language-server.markdown + + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.unison.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nc", "localhost", "5757" } + ``` + - `filetypes` : + ```lua + { "unison" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## unocss + +https://github.com/xna00/unocss-language-server + +UnoCSS Language Server can be installed via npm: +```sh +npm i unocss-language-server -g +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.unocss.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "unocss-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "html", "javascriptreact", "rescript", "typescriptreact", "vue", "svelte" } + ``` + - `root_dir` : + ```lua + root_pattern('unocss.config.js', 'unocss.config.ts', 'uno.config.js', 'uno.config.ts') + ``` + + +## uvls + +https://codeberg.org/caradhras/uvls +Language server for UVL, written using tree sitter and rust. +You can install the server easily using cargo: +```sh +git clone https://codeberg.org/caradhras/uvls +cd uvls +cargo install --path . +``` +Note: To activate properly nvim needs to know the uvl filetype. +You can add it via: +```lua +vim.cmd(\[\[au BufRead,BufNewFile *.uvl setfiletype uvl\]\]) +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.uvls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "uvls" } + ``` + - `filetypes` : + ```lua + { "uvl" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## v_analyzer + +https://github.com/v-analyzer/v-analyzer + +V language server. + +`v-analyzer` can be installed by following the instructions [here](https://github.com/v-analyzer/v-analyzer#installation). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.v_analyzer.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "v-analyzer" } + ``` + - `filetypes` : + ```lua + { "v", "vsh", "vv" } + ``` + - `root_dir` : + ```lua + root_pattern("v.mod", ".git") + ``` + + +## vacuum + +Vacuum is the worlds fastest OpenAPI 3, OpenAPI 2 / Swagger linter and quality analysis tool. + +You can install vacuum using mason or follow the instructions here: https://github.com/daveshanley/vacuum + +The file types are not detected automatically, you can register them manually (see below) or override the filetypes: + +```lua +vim.filetype.add { + pattern = { + ['openapi.*%.ya?ml'] = 'yaml.openapi', + ['openapi.*%.json'] = 'json.openapi', + }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vacuum.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vacuum", "language-server" } + ``` + - `filetypes` : + ```lua + { "yaml.openapi", "json.openapi" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## vala_ls + +https://github.com/Prince781/vala-language-server + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vala_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vala-language-server" } + ``` + - `filetypes` : + ```lua + { "vala", "genie" } + ``` + - `root_dir` : + ```lua + root_pattern("meson.build", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## vale_ls + +https://github.com/errata-ai/vale-ls + +An implementation of the Language Server Protocol (LSP) for the Vale command-line tool. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vale_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vale-ls" } + ``` + - `filetypes` : + ```lua + { "markdown", "text", "tex" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## vdmj + +https://github.com/nickbattle/vdmj + +The VDMJ language server can be installed by cloning the VDMJ repository and +running `mvn clean install`. + +Various options are provided to configure the language server (see below). In +particular: +- `annotation_paths` is a list of folders and/or jar file paths for annotations +that should be used with the language server; +- any value of `debugger_port` less than zero will disable the debugger; note +that if a non-zero value is used, only one instance of the server can be active +at a time. + +More settings for VDMJ can be changed in a file called `vdmj.properties` under +`root_dir/.vscode`. For a description of the available settings, see +[Section 7 of the VDMJ User Guide](https://raw.githubusercontent.com/nickbattle/vdmj/master/vdmj/documentation/UserGuide.pdf). + +Note: proof obligations and combinatorial testing are not currently supported +by neovim. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vdmj.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + Generated from the options given + ``` + - `filetypes` : + ```lua + { "vdmsl", "vdmpp", "vdmrt" } + ``` + - `options` : + ```lua + { + annotation_paths = {}, + debugger_port = -1, + high_precision = false, + java = "$JAVA_HOME/bin/java", + java_opts = { "-Xmx3000m", "-Xss1m" }, + logfile = "path.join(vim.fn.stdpath 'cache', 'vdm-lsp.log')", + mavenrepo = "$HOME/.m2/repository/dk/au/ece/vdmj", + version = "The latest version installed in `mavenrepo`" + } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor(fname) or find_vscode_ancestor(fname) + ``` + + +## verible + +https://github.com/chipsalliance/verible + +A linter and formatter for verilog and SystemVerilog files. + +Release binaries can be downloaded from [here](https://github.com/chipsalliance/verible/releases) +and placed in a directory on PATH. + +See https://github.com/chipsalliance/verible/tree/master/verilog/tools/ls/README.md for options. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.verible.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "verible-verilog-ls" } + ``` + - `filetypes` : + ```lua + { "systemverilog", "verilog" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## veridian + +https://github.com/vivekmalneedi/veridian + +A SystemVerilog LanguageServer. + +Download the latest release for your OS from the releases page + +# install with slang feature, if C++17 compiler is available +cargo install --git https://github.com/vivekmalneedi/veridian.git --all-features +# install if C++17 compiler is not available +cargo install --git https://github.com/vivekmalneedi/veridian.git + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.veridian.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "veridian" } + ``` + - `filetypes` : + ```lua + { "systemverilog", "verilog" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## veryl_ls + +https://github.com/veryl-lang/veryl + +Language server for Veryl + +`veryl-ls` can be installed via `cargo`: + ```sh + cargo install veryl-ls + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.veryl_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "veryl-ls" } + ``` + - `filetypes` : + ```lua + { "veryl" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## vhdl_ls + +Install vhdl_ls from https://github.com/VHDL-LS/rust_hdl and add it to path + +Configuration + +The language server needs to know your library mapping to perform full analysis of the code. For this it uses a configuration file in the TOML format named vhdl_ls.toml. + +vhdl_ls will load configuration files in the following order of priority (first to last): + + A file named .vhdl_ls.toml in the user home folder. + A file name from the VHDL_LS_CONFIG environment variable. + A file named vhdl_ls.toml in the workspace root. + +Settings in a later files overwrites those from previously loaded files. + +Example vhdl_ls.toml +``` +# File names are either absolute or relative to the parent folder of the vhdl_ls.toml file +[libraries] +lib2.files = [ + 'pkg2.vhd', +] +lib1.files = [ + 'pkg1.vhd', + 'tb_ent.vhd' +] +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vhdl_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vhdl_ls" } + ``` + - `filetypes` : + ```lua + { "vhd", "vhdl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## vimls + +https://github.com/iamcco/vim-language-server + +You can install vim-language-server via npm: +```sh +npm install -g vim-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vimls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vim-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "vim" } + ``` + - `init_options` : + ```lua + { + diagnostic = { + enable = true + }, + indexes = { + count = 3, + gap = 100, + projectRootPatterns = { "runtime", "nvim", ".git", "autoload", "plugin" }, + runtimepath = true + }, + isNeovim = true, + iskeyword = "@,48-57,_,192-255,-#", + runtimepath = "", + suggest = { + fromRuntimepath = true, + fromVimruntime = true + }, + vimruntime = "" + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## visualforce_ls + +https://github.com/forcedotcom/salesforcedx-vscode + +Language server for Visualforce. + +For manual installation, download the .vsix archive file from the +[forcedotcom/salesforcedx-vscode](https://github.com/forcedotcom/salesforcedx-vscode) +GitHub releases. Then, configure `cmd` to run the Node script at the unpacked location: + +```lua +require'lspconfig'.visualforce_ls.setup { + cmd = { + 'node', + '/path/to/unpacked/archive/extension/node_modules/@salesforce/salesforcedx-visualforce-language-server/out/src/visualforceServer.js', + '--stdio' + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.visualforce_ls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "visualforce" } + ``` + - `init_options` : + ```lua + { + embeddedLanguages = { + css = true, + javascript = true + } + } + ``` + - `root_dir` : + ```lua + root_pattern('sfdx-project.json') + ``` + + +## vls + +https://github.com/vlang/vls + +V language server. + +`v-language-server` can be installed by following the instructions [here](https://github.com/vlang/vls#installation). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "v", "ls" } + ``` + - `filetypes` : + ```lua + { "v", "vlang" } + ``` + - `root_dir` : + ```lua + root_pattern("v.mod", ".git") + ``` + + +## volar + +https://github.com/johnsoncodehk/volar/tree/20d713b/packages/vue-language-server + +Volar language server for Vue + +Volar can be installed via npm: + +```sh +npm install -g @vue/language-server +``` + +Volar by default supports Vue 3 projects. Vue 2 projects need +[additional configuration](https://github.com/vuejs/language-tools/tree/master/packages/vscode-vue#usage). + +**TypeScript support** +As of release 2.0.0, Volar no longer wraps around tsserver. For typescript +support, `tsserver` needs to be configured with the `@vue/typescript-plugin` +plugin. + +**Take Over Mode** + +Volar (prior to 2.0.0), can serve as a language server for both Vue and TypeScript via [Take Over Mode](https://github.com/johnsoncodehk/volar/discussions/471). + +To enable Take Over Mode, override the default filetypes in `setup{}` as follows: + +```lua +require'lspconfig'.volar.setup{ + filetypes = {'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue', 'json'} +} +``` + +**Overriding the default TypeScript Server used by Volar** + +The default config looks for TS in the local `node_modules`. This can lead to issues +e.g. when working on a [monorepo](https://monorepo.tools/). The alternatives are: + +- use a global TypeScript Server installation + +```lua +require'lspconfig'.volar.setup{ + init_options = { + typescript = { + tsdk = '/path/to/.npm/lib/node_modules/typescript/lib' + -- Alternative location if installed as root: + -- tsdk = '/usr/local/lib/node_modules/typescript/lib' + } + } +} +``` + +- use a local server and fall back to a global TypeScript Server installation + +```lua +local util = require 'lspconfig.util' +local function get_typescript_server_path(root_dir) + + local global_ts = '/home/[yourusernamehere]/.npm/lib/node_modules/typescript/lib' + -- Alternative location if installed as root: + -- local global_ts = '/usr/local/lib/node_modules/typescript/lib' + local found_ts = '' + local function check_dir(path) + found_ts = util.path.join(path, 'node_modules', 'typescript', 'lib') + if util.path.exists(found_ts) then + return path + end + end + if util.search_ancestors(root_dir, check_dir) then + return found_ts + else + return global_ts + end +end + +require'lspconfig'.volar.setup{ + on_new_config = function(new_config, new_root_dir) + new_config.init_options.typescript.tsdk = get_typescript_server_path(new_root_dir) + end, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.volar.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vue-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "vue" } + ``` + - `init_options` : + ```lua + { + typescript = { + tsdk = "" + } + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## vtsls + +https://github.com/yioneko/vtsls + +`vtsls` can be installed with npm: +```sh +npm install -g @vtsls/language-server +``` + +To configure a TypeScript project, add a +[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) +or [`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to +the root of your project. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vtsls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vtsls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } + ``` + - `root_dir` : + ```lua + root_pattern("tsconfig.json", "package.json", "jsconfig.json", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## vuels + +https://github.com/vuejs/vetur/tree/master/server + +Vue language server(vls) +`vue-language-server` can be installed via `npm`: +```sh +npm install -g vls +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vuels.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vls" } + ``` + - `filetypes` : + ```lua + { "vue" } + ``` + - `init_options` : + ```lua + { + config = { + css = {}, + emmet = {}, + html = { + suggest = {} + }, + javascript = { + format = {} + }, + stylusSupremacy = {}, + typescript = { + format = {} + }, + vetur = { + completion = { + autoImport = false, + tagCasing = "kebab", + useScaffoldSnippets = false + }, + format = { + defaultFormatter = { + js = "none", + ts = "none" + }, + defaultFormatterOptions = {}, + scriptInitialIndent = false, + styleInitialIndent = false + }, + useWorkspaceDependencies = false, + validation = { + script = true, + style = true, + template = true + } + } + } + } + ``` + - `root_dir` : + ```lua + root_pattern("package.json", "vue.config.js") + ``` + + +## wgsl_analyzer + +https://github.com/wgsl-analyzer/wgsl-analyzer + +`wgsl_analyzer` can be installed via `cargo`: +```sh +cargo install --git https://github.com/wgsl-analyzer/wgsl-analyzer wgsl_analyzer +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.wgsl_analyzer.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "wgsl_analyzer" } + ``` + - `filetypes` : + ```lua + { "wgsl" } + ``` + - `root_dir` : + ```lua + root_pattern(".git" + ``` + - `settings` : + ```lua + {} + ``` + + +## yamlls + +https://github.com/redhat-developer/yaml-language-server + +`yaml-language-server` can be installed via `yarn`: +```sh +yarn global add yaml-language-server +``` + +To use a schema for validation, there are two options: + +1. Add a modeline to the file. A modeline is a comment of the form: + +``` +# yaml-language-server: $schema=<urlToTheSchema|relativeFilePath|absoluteFilePath}> +``` + +where the relative filepath is the path relative to the open yaml file, and the absolute filepath +is the filepath relative to the filesystem root ('/' on unix systems) + +2. Associated a schema url, relative , or absolute (to root of project, not to filesystem root) path to +the a glob pattern relative to the detected project root. Check `:LspInfo` to determine the resolved project +root. + +```lua +require('lspconfig').yamlls.setup { + ... -- other configuration for setup {} + settings = { + yaml = { + ... -- other settings. note this overrides the lspconfig defaults. + schemas = { + ["https://json.schemastore.org/github-workflow.json"] = "/.github/workflows/*", + ["../path/relative/to/file.yml"] = "/.github/workflows/*", + ["/path/from/root/of/project"] = "/.github/workflows/*", + }, + }, + } +} +``` + +Currently, kubernetes is special-cased in yammls, see the following upstream issues: +* [#211](https://github.com/redhat-developer/yaml-language-server/issues/211). +* [#307](https://github.com/redhat-developer/yaml-language-server/issues/307). + +To override a schema to use a specific k8s schema version (for example, to use 1.18): + +```lua +require('lspconfig').yamlls.setup { + ... -- other configuration for setup {} + settings = { + yaml = { + ... -- other settings. note this overrides the lspconfig defaults. + schemas = { + ["https://raw.githubusercontent.com/instrumenta/kubernetes-json-schema/master/v1.18.0-standalone-strict/all.json"] = "/*.k8s.yaml", + ... -- other schemas + }, + }, + } +} +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.yamlls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "yaml-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "yaml", "yaml.docker-compose", "yaml.gitlab" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `settings` : + ```lua + { + redhat = { + telemetry = { + enabled = false + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## yang_lsp + +https://github.com/TypeFox/yang-lsp + +A Language Server for the YANG data modeling language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.yang_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "yang-language-server" } + ``` + - `filetypes` : + ```lua + { "yang" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## yls + +https://pypi.org/project/yls-yara/ + +An YLS plugin adding YARA linting capabilities. + +This plugin runs yara.compile on every save, parses the errors, and returns list of diagnostic messages. + +Language Server: https://github.com/avast/yls + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.yls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "yls", "-vv" } + ``` + - `filetypes` : + ```lua + { "yar", "yara" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## zk + +https://github.com/mickael-menu/zk + +A plain text note-taking assistant + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.zk.setup{} +``` +**Commands:** +- ZkIndex: ZkIndex +- ZkNew: ZkNew + +**Default values:** + - `cmd` : + ```lua + { "zk", "lsp" } + ``` + - `filetypes` : + ```lua + { "markdown" } + ``` + - `root_dir` : + ```lua + root_pattern(".zk") + ``` + + +## zls + +https://github.com/zigtools/zls + +Zig LSP implementation + Zig Language Server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.zls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "zls" } + ``` + - `filetypes` : + ```lua + { "zig", "zir" } + ``` + - `root_dir` : + ```lua + util.root_pattern("zls.json", "build.zig", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + + +vim:ft=markdown diff --git a/start/lspconfig-0.1.8/doc/server_configurations.txt b/start/lspconfig-0.1.8/doc/server_configurations.txt new file mode 100644 index 0000000..45946af --- /dev/null +++ b/start/lspconfig-0.1.8/doc/server_configurations.txt @@ -0,0 +1,13815 @@ +# Configurations +<!-- *lspconfig-all* *lspconfig-server-configurations* --> + +LSP configs provided by nvim-lspconfig are listed below. This documentation is +autogenerated from the Lua files. You can view this file in Nvim by running +`:help lspconfig-all`. + +- [agda_ls](#agda_ls) +- [aiken](#aiken) +- [als](#als) +- [anakin_language_server](#anakin_language_server) +- [angularls](#angularls) +- [ansiblels](#ansiblels) +- [antlersls](#antlersls) +- [apex_ls](#apex_ls) +- [arduino_language_server](#arduino_language_server) +- [asm_lsp](#asm_lsp) +- [ast_grep](#ast_grep) +- [astro](#astro) +- [autotools_ls](#autotools_ls) +- [awk_ls](#awk_ls) +- [azure_pipelines_ls](#azure_pipelines_ls) +- [basedpyright](#basedpyright) +- [bashls](#bashls) +- [beancount](#beancount) +- [bicep](#bicep) +- [biome](#biome) +- [bitbake_language_server](#bitbake_language_server) +- [blueprint_ls](#blueprint_ls) +- [bqnlsp](#bqnlsp) +- [bright_script](#bright_script) +- [bsl_ls](#bsl_ls) +- [buck2](#buck2) +- [buddy_ls](#buddy_ls) +- [bufls](#bufls) +- [bzl](#bzl) +- [cadence](#cadence) +- [cairo_ls](#cairo_ls) +- [ccls](#ccls) +- [cds_lsp](#cds_lsp) +- [circom-lsp](#circom-lsp) +- [clangd](#clangd) +- [clarity_lsp](#clarity_lsp) +- [clojure_lsp](#clojure_lsp) +- [cmake](#cmake) +- [cobol_ls](#cobol_ls) +- [codeqlls](#codeqlls) +- [coffeesense](#coffeesense) +- [contextive](#contextive) +- [coq_lsp](#coq_lsp) +- [crystalline](#crystalline) +- [csharp_ls](#csharp_ls) +- [css_variables](#css_variables) +- [cssls](#cssls) +- [cssmodules_ls](#cssmodules_ls) +- [cucumber_language_server](#cucumber_language_server) +- [custom_elements_ls](#custom_elements_ls) +- [cypher_ls](#cypher_ls) +- [dafny](#dafny) +- [dagger](#dagger) +- [dartls](#dartls) +- [dcmls](#dcmls) +- [debputy](#debputy) +- [delphi_ls](#delphi_ls) +- [denols](#denols) +- [dhall_lsp_server](#dhall_lsp_server) +- [diagnosticls](#diagnosticls) +- [digestif](#digestif) +- [docker_compose_language_service](#docker_compose_language_service) +- [dockerls](#dockerls) +- [dolmenls](#dolmenls) +- [dotls](#dotls) +- [dprint](#dprint) +- [drools_lsp](#drools_lsp) +- [ds_pinyin_lsp](#ds_pinyin_lsp) +- [earthlyls](#earthlyls) +- [ecsact](#ecsact) +- [efm](#efm) +- [elixirls](#elixirls) +- [elmls](#elmls) +- [elp](#elp) +- [ember](#ember) +- [emmet_language_server](#emmet_language_server) +- [emmet_ls](#emmet_ls) +- [erg_language_server](#erg_language_server) +- [erlangls](#erlangls) +- [esbonio](#esbonio) +- [eslint](#eslint) +- [facility_language_server](#facility_language_server) +- [fennel_language_server](#fennel_language_server) +- [fennel_ls](#fennel_ls) +- [flow](#flow) +- [flux_lsp](#flux_lsp) +- [foam_ls](#foam_ls) +- [fortls](#fortls) +- [fsautocomplete](#fsautocomplete) +- [fsharp_language_server](#fsharp_language_server) +- [fstar](#fstar) +- [futhark_lsp](#futhark_lsp) +- [gdscript](#gdscript) +- [gdshader_lsp](#gdshader_lsp) +- [ghcide](#ghcide) +- [ghdl_ls](#ghdl_ls) +- [ginko_ls](#ginko_ls) +- [gitlab_ci_ls](#gitlab_ci_ls) +- [gleam](#gleam) +- [glint](#glint) +- [glsl_analyzer](#glsl_analyzer) +- [glslls](#glslls) +- [golangci_lint_ls](#golangci_lint_ls) +- [gopls](#gopls) +- [gradle_ls](#gradle_ls) +- [grammarly](#grammarly) +- [graphql](#graphql) +- [groovyls](#groovyls) +- [guile_ls](#guile_ls) +- [harper_ls](#harper_ls) +- [haxe_language_server](#haxe_language_server) +- [hdl_checker](#hdl_checker) +- [helm_ls](#helm_ls) +- [hhvm](#hhvm) +- [hie](#hie) +- [hlasm](#hlasm) +- [hls](#hls) +- [hoon_ls](#hoon_ls) +- [html](#html) +- [htmx](#htmx) +- [hydra_lsp](#hydra_lsp) +- [hyprls](#hyprls) +- [idris2_lsp](#idris2_lsp) +- [intelephense](#intelephense) +- [java_language_server](#java_language_server) +- [jdtls](#jdtls) +- [jedi_language_server](#jedi_language_server) +- [jinja_lsp](#jinja_lsp) +- [jqls](#jqls) +- [jsonls](#jsonls) +- [jsonnet_ls](#jsonnet_ls) +- [julials](#julials) +- [koka](#koka) +- [kotlin_language_server](#kotlin_language_server) +- [lean3ls](#lean3ls) +- [leanls](#leanls) +- [lelwel_ls](#lelwel_ls) +- [lemminx](#lemminx) +- [lexical](#lexical) +- [ltex](#ltex) +- [lua_ls](#lua_ls) +- [luau_lsp](#luau_lsp) +- [lwc_ls](#lwc_ls) +- [m68k](#m68k) +- [markdown_oxide](#markdown_oxide) +- [marksman](#marksman) +- [matlab_ls](#matlab_ls) +- [mdx_analyzer](#mdx_analyzer) +- [mesonlsp](#mesonlsp) +- [metals](#metals) +- [millet](#millet) +- [mint](#mint) +- [mlir_lsp_server](#mlir_lsp_server) +- [mlir_pdll_lsp_server](#mlir_pdll_lsp_server) +- [mm0_ls](#mm0_ls) +- [mojo](#mojo) +- [motoko_lsp](#motoko_lsp) +- [move_analyzer](#move_analyzer) +- [mutt_ls](#mutt_ls) +- [nelua_lsp](#nelua_lsp) +- [neocmake](#neocmake) +- [nextls](#nextls) +- [nginx_language_server](#nginx_language_server) +- [nickel_ls](#nickel_ls) +- [nil_ls](#nil_ls) +- [nim_langserver](#nim_langserver) +- [nimls](#nimls) +- [nixd](#nixd) +- [nomad_lsp](#nomad_lsp) +- [ntt](#ntt) +- [nushell](#nushell) +- [nxls](#nxls) +- [ocamlls](#ocamlls) +- [ocamllsp](#ocamllsp) +- [ols](#ols) +- [omnisharp](#omnisharp) +- [opencl_ls](#opencl_ls) +- [openedge_ls](#openedge_ls) +- [openscad_ls](#openscad_ls) +- [openscad_lsp](#openscad_lsp) +- [pact_ls](#pact_ls) +- [pasls](#pasls) +- [pbls](#pbls) +- [perlls](#perlls) +- [perlnavigator](#perlnavigator) +- [perlpls](#perlpls) +- [pest_ls](#pest_ls) +- [phan](#phan) +- [phpactor](#phpactor) +- [pico8_ls](#pico8_ls) +- [pkgbuild_language_server](#pkgbuild_language_server) +- [please](#please) +- [postgres_lsp](#postgres_lsp) +- [powershell_es](#powershell_es) +- [prismals](#prismals) +- [prolog_ls](#prolog_ls) +- [prosemd_lsp](#prosemd_lsp) +- [psalm](#psalm) +- [puppet](#puppet) +- [purescriptls](#purescriptls) +- [pylsp](#pylsp) +- [pylyzer](#pylyzer) +- [pyre](#pyre) +- [pyright](#pyright) +- [qml_lsp](#qml_lsp) +- [qmlls](#qmlls) +- [quick_lint_js](#quick_lint_js) +- [r_language_server](#r_language_server) +- [racket_langserver](#racket_langserver) +- [raku_navigator](#raku_navigator) +- [reason_ls](#reason_ls) +- [regal](#regal) +- [regols](#regols) +- [relay_lsp](#relay_lsp) +- [remark_ls](#remark_ls) +- [rescriptls](#rescriptls) +- [rls](#rls) +- [rnix](#rnix) +- [robotframework_ls](#robotframework_ls) +- [roc_ls](#roc_ls) +- [rome](#rome) +- [rubocop](#rubocop) +- [ruby_lsp](#ruby_lsp) +- [ruff](#ruff) +- [ruff_lsp](#ruff_lsp) +- [rune_languageserver](#rune_languageserver) +- [rust_analyzer](#rust_analyzer) +- [salt_ls](#salt_ls) +- [scheme_langserver](#scheme_langserver) +- [scry](#scry) +- [serve_d](#serve_d) +- [shopify_theme_ls](#shopify_theme_ls) +- [sixtyfps](#sixtyfps) +- [slangd](#slangd) +- [slint_lsp](#slint_lsp) +- [smarty_ls](#smarty_ls) +- [smithy_ls](#smithy_ls) +- [snyk_ls](#snyk_ls) +- [solang](#solang) +- [solargraph](#solargraph) +- [solc](#solc) +- [solidity](#solidity) +- [solidity_ls](#solidity_ls) +- [solidity_ls_nomicfoundation](#solidity_ls_nomicfoundation) +- [somesass_ls](#somesass_ls) +- [sorbet](#sorbet) +- [sourcekit](#sourcekit) +- [sourcery](#sourcery) +- [spectral](#spectral) +- [spyglassmc_language_server](#spyglassmc_language_server) +- [sqlls](#sqlls) +- [sqls](#sqls) +- [standardrb](#standardrb) +- [starlark_rust](#starlark_rust) +- [starpls](#starpls) +- [statix](#statix) +- [steep](#steep) +- [stimulus_ls](#stimulus_ls) +- [stylelint_lsp](#stylelint_lsp) +- [svelte](#svelte) +- [svlangserver](#svlangserver) +- [svls](#svls) +- [swift_mesonls](#swift_mesonls) +- [syntax_tree](#syntax_tree) +- [tabby_ml](#tabby_ml) +- [tailwindcss](#tailwindcss) +- [taplo](#taplo) +- [tblgen_lsp_server](#tblgen_lsp_server) +- [teal_ls](#teal_ls) +- [templ](#templ) +- [terraform_lsp](#terraform_lsp) +- [terraformls](#terraformls) +- [texlab](#texlab) +- [textlsp](#textlsp) +- [tflint](#tflint) +- [theme_check](#theme_check) +- [thriftls](#thriftls) +- [tilt_ls](#tilt_ls) +- [tinymist](#tinymist) +- [tsp_server](#tsp_server) +- [tsserver](#tsserver) +- [ttags](#ttags) +- [turtle_ls](#turtle_ls) +- [twiggy_language_server](#twiggy_language_server) +- [typeprof](#typeprof) +- [typos_lsp](#typos_lsp) +- [typst_lsp](#typst_lsp) +- [uiua](#uiua) +- [unison](#unison) +- [unocss](#unocss) +- [uvls](#uvls) +- [v_analyzer](#v_analyzer) +- [vacuum](#vacuum) +- [vala_ls](#vala_ls) +- [vale_ls](#vale_ls) +- [vdmj](#vdmj) +- [verible](#verible) +- [veridian](#veridian) +- [veryl_ls](#veryl_ls) +- [vhdl_ls](#vhdl_ls) +- [vimls](#vimls) +- [visualforce_ls](#visualforce_ls) +- [vls](#vls) +- [volar](#volar) +- [vtsls](#vtsls) +- [vuels](#vuels) +- [wgsl_analyzer](#wgsl_analyzer) +- [yamlls](#yamlls) +- [yang_lsp](#yang_lsp) +- [yls](#yls) +- [zk](#zk) +- [zls](#zls) + +## agda_ls + +https://github.com/agda/agda-language-server + +Language Server for Agda. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.agda_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "als" } + ``` + - `filetypes` : + ```lua + { "agda" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## aiken + +https://github.com/aiken-lang/aiken + +A language server for Aiken Programming Language. +[Installation](https://aiken-lang.org/installation-instructions) + +It can be i + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.aiken.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "aiken", "lsp" } + ``` + - `filetypes` : + ```lua + { "aiken" } + ``` + - `root_dir` : + ```lua + root_pattern("aiken.toml", ".git") + ``` + + +## als + +https://github.com/AdaCore/ada_language_server + +Installation instructions can be found [here](https://github.com/AdaCore/ada_language_server#Install). + +Can be configured by passing a "settings" object to `als.setup{}`: + +```lua +require('lspconfig').als.setup{ + settings = { + ada = { + projectFile = "project.gpr"; + scenarioVariables = { ... }; + } + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.als.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ada_language_server" } + ``` + - `filetypes` : + ```lua + { "ada" } + ``` + - `root_dir` : + ```lua + util.root_pattern("Makefile", ".git", "*.gpr", "*.adc") + ``` + + +## anakin_language_server + +https://pypi.org/project/anakin-language-server/ + +`anakin-language-server` is yet another Jedi Python language server. + +Available options: + +* Initialization: https://github.com/muffinmad/anakin-language-server#initialization-option +* Configuration: https://github.com/muffinmad/anakin-language-server#configuration-options + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.anakin_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "anakinls" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + anakinls = { + pyflakes_errors = { "ImportStarNotPermitted", "UndefinedExport", "UndefinedLocal", "UndefinedName", "DuplicateArgument", "MultiValueRepeatedKeyLiteral", "MultiValueRepeatedKeyVariable", "FutureFeatureNotDefined", "LateFutureImport", "ReturnOutsideFunction", "YieldOutsideFunction", "ContinueOutsideLoop", "BreakOutsideLoop", "TwoStarredExpressions", "TooManyExpressionsInStarredAssignment", "ForwardAnnotationSyntaxError", "RaiseNotImplemented", "StringDotFormatExtraPositionalArguments", "StringDotFormatExtraNamedArguments", "StringDotFormatMissingArgument", "StringDotFormatMixingAutomatic", "StringDotFormatInvalidFormat", "PercentFormatInvalidFormat", "PercentFormatMixedPositionalAndNamed", "PercentFormatUnsupportedFormat", "PercentFormatPositionalCountMismatch", "PercentFormatExtraNamedArguments", "PercentFormatMissingArgument", "PercentFormatExpectedMapping", "PercentFormatExpectedSequence", "PercentFormatStarRequiresSequence" } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## angularls + +https://github.com/angular/vscode-ng-language-service + +`angular-language-server` can be installed via npm `npm install -g @angular/language-server`. + +Note, that if you override the default `cmd`, you must also update `on_new_config` to set `new_config.cmd` during startup. + +```lua +local project_library_path = "/path/to/project/lib" +local cmd = {"ngserver", "--stdio", "--tsProbeLocations", project_library_path , "--ngProbeLocations", project_library_path} + +require'lspconfig'.angularls.setup{ + cmd = cmd, + on_new_config = function(new_config,new_root_dir) + new_config.cmd = cmd + end, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.angularls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ngserver", "--stdio", "--tsProbeLocations", "", "--ngProbeLocations", "" } + ``` + - `filetypes` : + ```lua + { "typescript", "html", "typescriptreact", "typescript.tsx" } + ``` + - `root_dir` : + ```lua + root_pattern("angular.json") + ``` + + +## ansiblels + +https://github.com/ansible/vscode-ansible + +Language server for the ansible configuration management tool. + +`ansible-language-server` can be installed via `npm`: + +```sh +npm install -g @ansible/ansible-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ansiblels.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ansible-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "yaml.ansible" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + ansible = { + ansible = { + path = "ansible" + }, + executionEnvironment = { + enabled = false + }, + python = { + interpreterPath = "python" + }, + validation = { + enabled = true, + lint = { + enabled = true, + path = "ansible-lint" + } + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## antlersls + +https://www.npmjs.com/package/antlers-language-server + +`antlersls` can be installed via `npm`: +```sh +npm install -g antlers-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.antlersls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "antlersls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "html", "antlers" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## apex_ls + +https://github.com/forcedotcom/salesforcedx-vscode + +Language server for Apex. + +For manual installation, download the JAR file from the [VSCode +extension](https://github.com/forcedotcom/salesforcedx-vscode/tree/develop/packages/salesforcedx-vscode-apex). + +```lua +require'lspconfig'.apex_ls.setup { + apex_jar_path = '/path/to/apex-jorje-lsp.jar', + apex_enable_semantic_errors = false, -- Whether to allow Apex Language Server to surface semantic errors + apex_enable_completion_statistics = false, -- Whether to allow Apex Language Server to collect telemetry on code completion usage +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.apex_ls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "apexcode" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern('sfdx-project.json') + ``` + + +## arduino_language_server + +https://github.com/arduino/arduino-language-server + +Language server for Arduino + +The `arduino-language-server` can be installed by running: + +``` +go install github.com/arduino/arduino-language-server@latest +``` + +The `arduino-cli` tool must also be installed. Follow [these +installation instructions](https://arduino.github.io/arduino-cli/latest/installation/) for +your platform. + +After installing `arduino-cli`, follow [these +instructions](https://arduino.github.io/arduino-cli/latest/getting-started/#create-a-configuration-file) +for generating a configuration file if you haven't done so already, and make +sure you [install any relevant platforms +libraries](https://arduino.github.io/arduino-cli/latest/getting-started/#install-the-core-for-your-board). + +The language server also requires `clangd` to be installed. Follow [these +installation instructions](https://clangd.llvm.org/installation) for your +platform. + +If you don't have a sketch yet create one. + +```sh +$ arduino-cli sketch new test +$ cd test +``` + +You will need a `sketch.yaml` file in order for the language server to understand your project. It will also save you passing options to `arduino-cli` each time you compile or upload a file. You can generate the file like using the following commands. + + +First gather some information about your board. Make sure your board is connected and run the following: + +```sh +$ arduino-cli board list +Port Protocol Type Board Name FQBN Core +/dev/ttyACM0 serial Serial Port (USB) Arduino Uno arduino:avr:uno arduino:avr +``` + +Then generate the file: + +```sh +arduino-cli board attach -p /dev/ttyACM0 -b arduino:avr:uno test.ino +``` + +The resulting file should like like this: + +```yaml +default_fqbn: arduino:avr:uno +default_port: /dev/ttyACM0 +``` + +Your folder structure should look like this: + +``` +. +├── test.ino +└── sketch.yaml +``` + +For further instruction about configuration options, run `arduino-language-server --help`. + +Note that an upstream bug makes keywords in some cases become undefined by the language server. +Ref: https://github.com/arduino/arduino-ide/issues/159 + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.arduino_language_server.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + { + general = { + positionEncodings = { "utf-16" } + }, + textDocument = { + callHierarchy = { + dynamicRegistration = false + }, + codeAction = { + codeActionLiteralSupport = { + codeActionKind = { + valueSet = { "", "quickfix", "refactor", "refactor.extract", "refactor.inline", "refactor.rewrite", "source", "source.organizeImports" } + } + }, + dataSupport = true, + dynamicRegistration = true, + isPreferredSupport = true, + resolveSupport = { + properties = { "edit" } + } + }, + completion = { + completionItem = { + commitCharactersSupport = false, + deprecatedSupport = false, + documentationFormat = { "markdown", "plaintext" }, + preselectSupport = false, + snippetSupport = false + }, + completionItemKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 } + }, + completionList = { + itemDefaults = { "editRange", "insertTextFormat", "insertTextMode", "data" } + }, + contextSupport = false, + dynamicRegistration = false + }, + declaration = { + linkSupport = true + }, + definition = { + dynamicRegistration = true, + linkSupport = true + }, + diagnostic = { + dynamicRegistration = false + }, + documentHighlight = { + dynamicRegistration = false + }, + documentSymbol = { + dynamicRegistration = false, + hierarchicalDocumentSymbolSupport = true, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + formatting = { + dynamicRegistration = true + }, + hover = { + contentFormat = { "markdown", "plaintext" }, + dynamicRegistration = true + }, + implementation = { + linkSupport = true + }, + inlayHint = { + dynamicRegistration = true, + resolveSupport = { + properties = { "textEdits", "tooltip", "location", "command" } + } + }, + publishDiagnostics = { + dataSupport = true, + relatedInformation = true, + tagSupport = { + valueSet = { 1, 2 } + } + }, + rangeFormatting = { + dynamicRegistration = true + }, + references = { + dynamicRegistration = false + }, + rename = { + dynamicRegistration = true, + prepareSupport = true + }, + semanticTokens = vim.NIL, + signatureHelp = { + dynamicRegistration = false, + signatureInformation = { + activeParameterSupport = true, + documentationFormat = { "markdown", "plaintext" }, + parameterInformation = { + labelOffsetSupport = true + } + } + }, + synchronization = { + didSave = true, + dynamicRegistration = false, + willSave = true, + willSaveWaitUntil = true + }, + typeDefinition = { + linkSupport = true + } + }, + window = { + showDocument = { + support = true + }, + showMessage = { + messageActionItem = { + additionalPropertiesSupport = false + } + }, + workDoneProgress = true + }, + workspace = { + applyEdit = true, + configuration = true, + didChangeConfiguration = { + dynamicRegistration = false + }, + didChangeWatchedFiles = { + dynamicRegistration = false, + relativePatternSupport = true + }, + inlayHint = { + refreshSupport = true + }, + semanticTokens = vim.NIL, + symbol = { + dynamicRegistration = false, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + workspaceEdit = { + resourceOperations = { "rename", "create", "delete" } + }, + workspaceFolders = true + } + } + ``` + - `cmd` : + ```lua + { "arduino-language-server" } + ``` + - `filetypes` : + ```lua + { "arduino" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## asm_lsp + +https://github.com/bergercookie/asm-lsp + +Language Server for GAS/GO Assembly + +`asm-lsp` can be installed via cargo: +cargo install asm-lsp + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.asm_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "asm-lsp" } + ``` + - `filetypes` : + ```lua + { "asm", "vmasm" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## ast_grep + +https://ast-grep.github.io/ + +ast-grep(sg) is a fast and polyglot tool for code structural search, lint, rewriting at large scale. +ast-grep LSP only works in projects that have `sgconfig.y[a]ml` in their root directories. +```sh +npm install [-g] @ast-grep/cli +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ast_grep.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ast-grep", "lsp" } + ``` + - `filetypes` : + ```lua + { "c", "cpp", "rust", "go", "java", "python", "javascript", "typescript", "html", "css", "kotlin", "dart", "lua" } + ``` + - `root_dir` : + ```lua + root_pattern('sgconfig.yaml', 'sgconfig.yml') + ``` + + +## astro + +https://github.com/withastro/language-tools/tree/main/packages/language-server + +`astro-ls` can be installed via `npm`: +```sh +npm install -g @astrojs/language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.astro.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "astro-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "astro" } + ``` + - `init_options` : + ```lua + { + typescript = {} + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git") + ``` + + +## autotools_ls + +https://github.com/Freed-Wu/autotools-language-server + +`autotools-language-server` can be installed via `pip`: +```sh +pip install autotools-language-server +``` + +Language server for autoconf, automake and make using tree sitter in python. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.autotools_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "autotools-language-server" } + ``` + - `filetypes` : + ```lua + { "config", "automake", "make" } + ``` + - `root_dir` : + ```lua + { "configure.ac", "Makefile", "Makefile.am", "*.mk" } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## awk_ls + +https://github.com/Beaglefoot/awk-language-server/ + +`awk-language-server` can be installed via `npm`: +```sh +npm install -g awk-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.awk_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "awk-language-server" } + ``` + - `filetypes` : + ```lua + { "awk" } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## azure_pipelines_ls + +https://github.com/microsoft/azure-pipelines-language-server + +An Azure Pipelines language server + +`azure-pipelines-ls` can be installed via `npm`: + +```sh +npm install -g azure-pipelines-language-server +``` + +By default `azure-pipelines-ls` will only work in files named `azure-pipelines.yml`, this can be changed by providing additional settings like so: +```lua +require("lspconfig").azure_pipelines_ls.setup { + ... -- other configuration for setup {} + settings = { + yaml = { + schemas = { + ["https://raw.githubusercontent.com/microsoft/azure-pipelines-vscode/master/service-schema.json"] = { + "/azure-pipeline*.y*l", + "/*.azure*", + "Azure-Pipelines/**/*.y*l", + "Pipelines/*.y*l", + }, + }, + }, + }, +} +``` +The Azure Pipelines LSP is a fork of `yaml-language-server` and as such the same settings can be passed to it as `yaml-language-server`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.azure_pipelines_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "azure-pipelines-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "yaml" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## basedpyright + +https://detachhead.github.io/basedpyright + +`basedpyright`, a static type checker and language server for python + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.basedpyright.setup{} +``` +**Commands:** +- PyrightOrganizeImports: Organize Imports +- PyrightSetPythonPath: Reconfigure basedpyright with the provided python path + +**Default values:** + - `cmd` : + ```lua + { "basedpyright-langserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + basedpyright = { + analysis = { + autoSearchPaths = true, + diagnosticMode = "openFilesOnly", + useLibraryCodeForTypes = true + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bashls + +https://github.com/bash-lsp/bash-language-server + +`bash-language-server` can be installed via `npm`: +```sh +npm i -g bash-language-server +``` + +Language server for bash, written using tree sitter in typescript. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bashls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bash-language-server", "start" } + ``` + - `filetypes` : + ```lua + { "sh" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `settings` : + ```lua + { + bashIde = { + globPattern = "*@(.sh|.inc|.bash|.command)" + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## beancount + +https://github.com/polarmutex/beancount-language-server#installation + +See https://github.com/polarmutex/beancount-language-server#configuration for configuration options + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.beancount.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "beancount-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "beancount", "bean" } + ``` + - `init_options` : + ```lua + {} + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bicep + +https://github.com/azure/bicep +Bicep language server + +Bicep language server can be installed by downloading and extracting a release of bicep-langserver.zip from [Bicep GitHub releases](https://github.com/Azure/bicep/releases). + +Bicep language server requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. + +Neovim does not have built-in support for the bicep filetype which is required for lspconfig to automatically launch the language server. + +Filetype detection can be added via an autocmd: +```lua +vim.cmd [[ autocmd BufNewFile,BufRead *.bicep set filetype=bicep ]] +``` + +**By default, bicep language server does not have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. + +```lua +local bicep_lsp_bin = "/path/to/bicep-langserver/Bicep.LangServer.dll" +require'lspconfig'.bicep.setup{ + cmd = { "dotnet", bicep_lsp_bin }; + ... +} +``` + +To download the latest release and place in /usr/local/bin/bicep-langserver: +```bash +(cd $(mktemp -d) \ + && curl -fLO https://github.com/Azure/bicep/releases/latest/download/bicep-langserver.zip \ + && rm -rf /usr/local/bin/bicep-langserver \ + && unzip -d /usr/local/bin/bicep-langserver bicep-langserver.zip) +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bicep.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "bicep" } + ``` + - `init_options` : + ```lua + {} + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## biome + +https://biomejs.dev + +Toolchain of the web. [Successor of Rome](https://biomejs.dev/blog/annoucing-biome). + +```sh +npm install [-g] @biomejs/biome +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.biome.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "biome", "lsp-proxy" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "json", "jsonc", "typescript", "typescript.tsx", "typescriptreact", "astro", "svelte", "vue" } + ``` + - `root_dir` : + ```lua + root_pattern('biome.json', 'biome.jsonc') + ``` + - `single_file_support` : + ```lua + false + ``` + + +## bitbake_language_server + +🛠️ bitbake language server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bitbake_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bitbake-language-server" } + ``` + - `filetypes` : + ```lua + { "bitbake" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## blueprint_ls + +https://gitlab.gnome.org/jwestman/blueprint-compiler + +`blueprint-compiler` can be installed via your system package manager. + +Language server for the blueprint markup language, written in python and part +of the blueprint-compiler. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.blueprint_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "blueprint-compiler", "lsp" } + ``` + - `cmd_env` : + ```lua + { + GLOB_PATTERN = "*@(.blp)" + } + ``` + - `filetypes` : + ```lua + { "blueprint" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bqnlsp + +https://git.sr.ht/~detegr/bqnlsp + + +`bqnlsp`, a language server for BQN. + +The binary depends on the shared library of [CBQN](https://github.com/dzaima/CBQN) `libcbqn.so`. +If CBQN is installed system-wide (using `sudo make install` in its source directory) and `bqnlsp` errors that it can't find the shared library, update the linker cache by executing `sudo ldconfig`. +If CBQN has been installed in a non-standard directory or can't be installed globally pass `libcbqnPath = '/path/to/CBQN'` to the setup function. +This will set the environment variables `LD_LIBRARY_PATH` (Linux) or `DYLD_LIBRARY_PATH` (macOS) to the provided path. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bqnlsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bqnlsp" } + ``` + - `filetypes` : + ```lua + { "bqn" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bright_script + +https://github.com/RokuCommunity/brighterscript + +`brightscript` can be installed via `npm`: +```sh +npm install -g brighterscript +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bright_script.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bsc", "--lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "brs" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bsl_ls + + https://github.com/1c-syntax/bsl-language-server + + Language Server Protocol implementation for 1C (BSL) - 1C:Enterprise 8 and OneScript languages. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bsl_ls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "bsl", "os" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + + +## buck2 + +https://github.com/facebook/buck2 + +Build system, successor to Buck + +To better detect Buck2 project files, the following can be added: + +``` +vim.cmd [[ autocmd BufRead,BufNewFile *.bxl,BUCK,TARGETS set filetype=bzl ]] +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.buck2.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "buck2", "lsp" } + ``` + - `filetypes` : + ```lua + { "bzl" } + ``` + - `root_dir` : + ```lua + root_pattern(".buckconfig") + ``` + + +## buddy_ls + +https://github.com/buddy-compiler/buddy-mlir#buddy-lsp-server +The Language Server for the buddy-mlir, a drop-in replacement for mlir-lsp-server, +supporting new dialects defined in buddy-mlir. +`buddy-lsp-server` can be installed at the buddy-mlir repository (buddy-compiler/buddy-mlir) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.buddy_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "buddy-lsp-server" } + ``` + - `filetypes` : + ```lua + { "mlir" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## bufls + +https://github.com/bufbuild/buf-language-server + +`buf-language-server` can be installed via `go install`: +```sh +go install github.com/bufbuild/buf-language-server/cmd/bufls@latest +``` + +bufls is a Protobuf language server compatible with Buf modules and workspaces + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bufls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bufls", "serve" } + ``` + - `filetypes` : + ```lua + { "proto" } + ``` + - `root_dir` : + ```lua + root_pattern("buf.work.yaml", ".git") + ``` + + +## bzl + +https://bzl.io/ + +https://docs.stack.build/docs/cli/installation + +https://docs.stack.build/docs/vscode/starlark-language-server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.bzl.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "bzl", "lsp", "serve" } + ``` + - `filetypes` : + ```lua + { "bzl" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + + +## cadence + +[Cadence Language Server](https://github.com/onflow/cadence-tools/tree/master/languageserver) +using the [flow-cli](https://developers.flow.com/tools/flow-cli). + +The `flow` command from flow-cli must be available. For install instructions see +[the docs](https://developers.flow.com/tools/flow-cli/install#install-the-flow-cli) or the +[Github page](https://github.com/onflow/flow-cli). + +By default the configuration is taken from the closest `flow.json` or the `flow.json` in the users home directory. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cadence.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "flow", "cadence", "language-server" } + ``` + - `filetypes` : + ```lua + { "cdc" } + ``` + - `init_options` : + ```lua + { + numberOfAccounts = "1" + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + util.root_pattern('flow.json') or vim.env.HOME + ``` + + +## cairo_ls + +[Cairo Language Server](https://github.com/starkware-libs/cairo/tree/main/crates/cairo-lang-language-server) + +First, install cairo following [this tutorial](https://medium.com/@elias.tazartes/ahead-of-the-curve-install-cairo-1-0-alpha-and-prepare-for-regenesis-85f4e3940e20) + +Then enable cairo language server in your lua configuration. +```lua +require'lspconfig'.cairo_ls.setup{} +``` + +*cairo-language-server is still under active development, some features might not work yet !* + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cairo_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cairo-language-server", "/C", "--node-ipc" } + ``` + - `filetypes` : + ```lua + { "cairo" } + ``` + - `init_options` : + ```lua + { + hostInfo = "neovim" + } + ``` + - `root_dir` : + ```lua + root_pattern("Scarb.toml", "cairo_project.toml", ".git") + ``` + + +## ccls + +https://github.com/MaskRay/ccls/wiki + +ccls relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified +as compile_commands.json or, for simpler projects, a .ccls. +For details on how to automatically generate one using CMake look [here](https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html). Alternatively, you can use [Bear](https://github.com/rizsotto/Bear). + +Customization options are passed to ccls at initialization time via init_options, a list of available options can be found [here](https://github.com/MaskRay/ccls/wiki/Customization#initialization-options). For example: + +```lua +local lspconfig = require'lspconfig' +lspconfig.ccls.setup { + init_options = { + compilationDatabaseDirectory = "build"; + index = { + threads = 0; + }; + clang = { + excludeArgs = { "-frounding-math"} ; + }; + } +} + +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ccls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ccls" } + ``` + - `filetypes` : + ```lua + { "c", "cpp", "objc", "objcpp", "cuda" } + ``` + - `offset_encoding` : + ```lua + "utf-32" + ``` + - `root_dir` : + ```lua + root_pattern('compile_commands.json', '.ccls', '.git') + ``` + - `single_file_support` : + ```lua + false + ``` + + +## cds_lsp + + +https://cap.cloud.sap/docs/ + +`cds-lsp` can be installed via `npm`: + +```sh +npm i -g @sap/cds-lsp +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cds_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cds-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "cds" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + cds = { + validate = true + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## circom-lsp + +[Circom Language Server](https://github.com/rubydusa/circom-lsp) + +`circom-lsp`, the language server for the Circom language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.circom-lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "circom-lsp" } + ``` + - `filetypes` : + ```lua + { "circom" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## clangd + +https://clangd.llvm.org/installation.html + +- **NOTE:** Clang >= 11 is recommended! See [#23](https://github.com/neovim/nvim-lsp/issues/23). +- If `compile_commands.json` lives in a build directory, you should + symlink it to the root of your source tree. + ``` + ln -s /path/to/myproject/build/compile_commands.json /path/to/myproject/ + ``` +- clangd relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) + specified as compile_commands.json, see https://clangd.llvm.org/installation#compile_commandsjson + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.clangd.setup{} +``` +**Commands:** +- ClangdSwitchSourceHeader: Switch between source/header + +**Default values:** + - `capabilities` : + ```lua + default capabilities, with offsetEncoding utf-8 + ``` + - `cmd` : + ```lua + { "clangd" } + ``` + - `filetypes` : + ```lua + { "c", "cpp", "objc", "objcpp", "cuda", "proto" } + ``` + - `root_dir` : + ```lua + root_pattern( + '.clangd', + '.clang-tidy', + '.clang-format', + 'compile_commands.json', + 'compile_flags.txt', + 'configure.ac', + '.git' + ) + + ``` + - `single_file_support` : + ```lua + true + ``` + + +## clarity_lsp + +`clarity-lsp` is a language server for the Clarity language. Clarity is a decidable smart contract language that optimizes for predictability and security. Smart contracts allow developers to encode essential business logic on a blockchain. + +To learn how to configure the clarity language server, see the [clarity-lsp documentation](https://github.com/hirosystems/clarity-lsp). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.clarity_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "clarity-lsp" } + ``` + - `filetypes` : + ```lua + { "clar", "clarity" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + + +## clojure_lsp + +https://github.com/clojure-lsp/clojure-lsp + +Clojure Language Server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.clojure_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "clojure-lsp" } + ``` + - `filetypes` : + ```lua + { "clojure", "edn" } + ``` + - `root_dir` : + ```lua + root_pattern("project.clj", "deps.edn", "build.boot", "shadow-cljs.edn", ".git", "bb.edn") + ``` + + +## cmake + +https://github.com/regen100/cmake-language-server + +CMake LSP Implementation + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cmake.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cmake-language-server" } + ``` + - `filetypes` : + ```lua + { "cmake" } + ``` + - `init_options` : + ```lua + { + buildDirectory = "build" + } + ``` + - `root_dir` : + ```lua + root_pattern('CMakePresets.json', 'CTestConfig.cmake', '.git', 'build', 'cmake') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## cobol_ls + +Cobol language support + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cobol_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cobol-language-support" } + ``` + - `filetypes` : + ```lua + { "cobol" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## codeqlls + +Reference: +https://codeql.github.com/docs/codeql-cli/ + +Binaries: +https://github.com/github/codeql-cli-binaries + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.codeqlls.setup{} +``` + + +**Default values:** + - `before_init` : + ```lua + see source file + ``` + - `cmd` : + ```lua + { "codeql", "execute", "language-server", "--check-errors", "ON_CHANGE", "-q" } + ``` + - `filetypes` : + ```lua + { "ql" } + ``` + - `log_level` : + ```lua + 2 + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + search_path = "list containing all search paths, eg: '~/codeql-home/codeql-repo'" + } + ``` + + +## coffeesense + +https://github.com/phil294/coffeesense + +CoffeeSense Language Server +`coffeesense-language-server` can be installed via `npm`: +```sh +npm install -g coffeesense-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.coffeesense.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "coffeesense-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "coffee" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## contextive + +https://github.com/dev-cycles/contextive + +Language Server for Contextive. + +Contextive allows you to define terms in a central file and provides auto-completion suggestions and hover panels for these terms wherever they're used. + +To install the language server, you need to download the appropriate [GitHub release asset](https://github.com/dev-cycles/contextive/releases/) for your operating system and architecture. + +After the download unzip the Contextive.LanguageServer binary and copy the file into a folder that is included in your system's PATH. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.contextive.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "Contextive.LanguageServer" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## coq_lsp + +https://github.com/ejgallego/coq-lsp/ + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.coq_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "coq-lsp" } + ``` + - `filetypes` : + ```lua + { "coq" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## crystalline + +https://github.com/elbywan/crystalline + +Crystal language server. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.crystalline.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "crystalline" } + ``` + - `filetypes` : + ```lua + { "crystal" } + ``` + - `root_dir` : + ```lua + root_pattern('shard.yml', '.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## csharp_ls + +https://github.com/razzmatazz/csharp-language-server + +Language Server for C#. + +csharp-ls requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. + +The preferred way to install csharp-ls is with `dotnet tool install --global csharp-ls`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.csharp_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "csharp-ls" } + ``` + - `filetypes` : + ```lua + { "cs" } + ``` + - `init_options` : + ```lua + { + AutomaticWorkspaceInit = true + } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## css_variables + +https://github.com/vunguyentuan/vscode-css-variables/tree/master/packages/css-variables-language-server + +CSS variables autocompletion and go-to-definition + +`css-variables-language-server` can be installed via `npm`: + +```sh +npm i -g css-variables-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.css_variables.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "css-variables-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "css", "scss", "less" } + ``` + - `root_dir` : + ```lua + root_pattern("package.json", ".git") or bufdir + ``` + - `settings` : + ```lua + cssVariables = { + lookupFiles = { '**/*.less', '**/*.scss', '**/*.sass', '**/*.css' }, + blacklistFolders = { + '**/.cache', + '**/.DS_Store', + '**/.git', + '**/.hg', + '**/.next', + '**/.svn', + '**/bower_components', + '**/CVS', + '**/dist', + '**/node_modules', + '**/tests', + '**/tmp', + }, + }, + + ``` + + +## cssls + + +https://github.com/hrsh7th/vscode-langservers-extracted + +`css-languageserver` can be installed via `npm`: + +```sh +npm i -g vscode-langservers-extracted +``` + +Neovim does not currently include built-in snippets. `vscode-css-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. + +```lua +--Enable (broadcasting) snippet capability for completion +local capabilities = vim.lsp.protocol.make_client_capabilities() +capabilities.textDocument.completion.completionItem.snippetSupport = true + +require'lspconfig'.cssls.setup { + capabilities = capabilities, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cssls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vscode-css-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "css", "scss", "less" } + ``` + - `init_options` : + ```lua + { + provideFormatter = true + } + ``` + - `root_dir` : + ```lua + root_pattern("package.json", ".git") or bufdir + ``` + - `settings` : + ```lua + { + css = { + validate = true + }, + less = { + validate = true + }, + scss = { + validate = true + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## cssmodules_ls + +https://github.com/antonk52/cssmodules-language-server + +Language server for autocompletion and go-to-definition functionality for CSS modules. + +You can install cssmodules-language-server via npm: +```sh +npm install -g cssmodules-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cssmodules_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cssmodules-language-server" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "typescript", "typescriptreact" } + ``` + - `root_dir` : + ```lua + root_pattern("package.json") + ``` + + +## cucumber_language_server + +https://cucumber.io +https://github.com/cucumber/common +https://www.npmjs.com/package/@cucumber/language-server + +Language server for Cucumber. + +`cucumber-language-server` can be installed via `npm`: +```sh +npm install -g @cucumber/language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cucumber_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cucumber-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "cucumber" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## custom_elements_ls + +https://github.com/Matsuuu/custom-elements-language-server + +`custom-elements-languageserver` depends on `typescript`. Both packages can be installed via `npm`: +```sh +npm install -g typescript custom-elements-languageserver +``` +To configure typescript language server, add a +[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or +[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your +project. +Here's an example that disables type checking in JavaScript files. +```json +{ + "compilerOptions": { + "module": "commonjs", + "target": "es6", + "checkJs": false + }, + "exclude": [ + "node_modules" + ] +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.custom_elements_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "custom-elements-languageserver", "--stdio" } + ``` + - `init_options` : + ```lua + { + hostInfo = "neovim" + } + ``` + - `root_dir` : + ```lua + root_pattern("tsconfig.json", "package.json", "jsconfig.json", ".git") + ``` + + +## cypher_ls + +https://github.com/neo4j/cypher-language-support/tree/main/packages/language-server + +`cypher-language-server`, language server for Cypher query language. +Part of the umbrella project cypher-language-support: https://github.com/neo4j/cypher-language-support + +`cypher-language-server` can be installed via `npm`: +```sh +npm i -g @neo4j-cypher/language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.cypher_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cypher-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "cypher" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dafny + + Support for the Dafny language server. + + The default `cmd` uses "dafny server", which works on Dafny 4.0.0+. For + older versions of Dafny, you can compile the language server from source at + [dafny-lang/language-server-csharp](https://github.com/dafny-lang/language-server-csharp) + and set `cmd = {"dotnet", "<Path to your language server>"}`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dafny.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dafny", "server" } + ``` + - `filetypes` : + ```lua + { "dfy", "dafny" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dagger + +https://github.com/dagger/cuelsp + +Dagger's lsp server for cuelang. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dagger.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "cuelsp" } + ``` + - `filetypes` : + ```lua + { "cue" } + ``` + - `root_dir` : + ```lua + root_pattern("cue.mod", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dartls + +https://github.com/dart-lang/sdk/tree/master/pkg/analysis_server/tool/lsp_spec + +Language server for dart. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dartls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dart", "language-server", "--protocol=lsp" } + ``` + - `filetypes` : + ```lua + { "dart" } + ``` + - `init_options` : + ```lua + { + closingLabels = true, + flutterOutline = true, + onlyAnalyzeProjectsWithOpenFiles = true, + outline = true, + suggestFromUnimportedLibraries = true + } + ``` + - `root_dir` : + ```lua + root_pattern("pubspec.yaml") + ``` + - `settings` : + ```lua + { + dart = { + completeFunctionCalls = true, + showTodos = true + } + } + ``` + + +## dcmls + +https://dcm.dev/ + +Language server for DCM analyzer. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dcmls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dcm", "start-server", "--client=neovim" } + ``` + - `filetypes` : + ```lua + { "dart" } + ``` + - `root_dir` : + ```lua + root_pattern("pubspec.yaml") + ``` + + +## debputy + +https://salsa.debian.org/debian/debputy + +Language Server for Debian packages. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.debputy.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "debputy", "lsp", "server" } + ``` + - `filetypes` : + ```lua + { "debcontrol", "debcopyright", "debchangelog", "make", "yaml" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## delphi_ls + +Language server for Delphi from Embarcadero. +https://marketplace.visualstudio.com/items?itemName=EmbarcaderoTechnologies.delphilsp + +Note, the '*.delphilsp.json' file is required, more details at: +https://docwiki.embarcadero.com/RADStudio/Alexandria/en/Using_DelphiLSP_Code_Insight_with_Other_Editors + +Below, you'll find a sample configuration for the lazy manager. +When on_attach is triggered, it signals DelphiLSP to load settings from a configuration file. +Without this step, DelphiLSP initializes but remains non-functional: + +```lua +"neovim/nvim-lspconfig", +lazy = false, +config = function() + local capabilities = require("cmp_nvim_lsp").default_capabilities() + local lspconfig = require("lspconfig") + + lspconfig.delphi_ls.setup({ + capabilities = capabilities, + + on_attach = function(client) + local lsp_config = vim.fs.find(function(name) + return name:match(".*%.delphilsp.json$") + end, { type = "file", path = client.config.root_dir, upward = false })[1] + + if lsp_config then + client.config.settings = { settingsFile = lsp_config } + client.notify("workspace/didChangeConfiguration", { settings = client.config.settings }) + else + vim.notify_once("delphi_ls: '*.delphilsp.json' config file not found") + end + end, + }) +end, +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.delphi_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "DelphiLSP.exe" } + ``` + - `filetypes` : + ```lua + { "pascal" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + false + ``` + + +## denols + +https://github.com/denoland/deno + +Deno's built-in language server + +To appropriately highlight codefences returned from denols, you will need to augment vim.g.markdown_fenced languages + in your init.lua. Example: + +```lua +vim.g.markdown_fenced_languages = { + "ts=typescript" +} +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.denols.setup{} +``` +**Commands:** +- DenolsCache: Cache a module and all of its dependencies. + +**Default values:** + - `cmd` : + ```lua + { "deno", "lsp" } + ``` + - `cmd_env` : + ```lua + { + NO_COLOR = true + } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } + ``` + - `handlers` : + ```lua + { + ["textDocument/definition"] = <function 1>, + ["textDocument/references"] = <function 1>, + ["textDocument/typeDefinition"] = <function 1> + } + ``` + - `root_dir` : + ```lua + root_pattern("deno.json", "deno.jsonc", ".git") + ``` + - `settings` : + ```lua + { + deno = { + enable = true, + suggest = { + imports = { + hosts = { + ["https://deno.land"] = true + } + } + } + } + } + ``` + + +## dhall_lsp_server + +https://github.com/dhall-lang/dhall-haskell/tree/master/dhall-lsp-server + +language server for dhall + +`dhall-lsp-server` can be installed via cabal: +```sh +cabal install dhall-lsp-server +``` +prebuilt binaries can be found [here](https://github.com/dhall-lang/dhall-haskell/releases). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dhall_lsp_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dhall-lsp-server" } + ``` + - `filetypes` : + ```lua + { "dhall" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## diagnosticls + +https://github.com/iamcco/diagnostic-languageserver + +Diagnostic language server integrate with linters. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.diagnosticls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "diagnostic-languageserver", "--stdio" } + ``` + - `filetypes` : + ```lua + Empty by default, override to add filetypes + ``` + - `root_dir` : + ```lua + Vim's starting directory + ``` + - `single_file_support` : + ```lua + true + ``` + + +## digestif + +https://github.com/astoff/digestif + +Digestif is a code analyzer, and a language server, for LaTeX, ConTeXt et caterva. It provides + +context-sensitive completion, documentation, code navigation, and related functionality to any + +text editor that speaks the LSP protocol. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.digestif.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "digestif" } + ``` + - `filetypes` : + ```lua + { "tex", "plaintex", "context" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## docker_compose_language_service + +https://github.com/microsoft/compose-language-service +This project contains a language service for Docker Compose. + +`compose-language-service` can be installed via `npm`: + +```sh +npm install @microsoft/compose-language-service +``` + +Note: If the docker-compose-langserver doesn't startup when entering a `docker-compose.yaml` file, make sure that the filetype is `yaml.docker-compose`. You can set with: `:set filetype=yaml.docker-compose`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.docker_compose_language_service.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "docker-compose-langserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "yaml.docker-compose" } + ``` + - `root_dir` : + ```lua + root_pattern("docker-compose.yaml", "docker-compose.yml", "compose.yaml", "compose.yml") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dockerls + +https://github.com/rcjsuen/dockerfile-language-server-nodejs + +`docker-langserver` can be installed via `npm`: +```sh +npm install -g dockerfile-language-server-nodejs +``` + +Additional configuration can be applied in the following way: +```lua +require("lspconfig").dockerls.setup { + settings = { + docker = { + languageserver = { + formatter = { + ignoreMultilineInstructions = true, + }, + }, + } + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dockerls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "docker-langserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "dockerfile" } + ``` + - `root_dir` : + ```lua + root_pattern("Dockerfile") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dolmenls + +https://github.com/Gbury/dolmen/blob/master/doc/lsp.md + +`dolmenls` can be installed via `opam` +```sh +opam install dolmen_lsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dolmenls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dolmenls" } + ``` + - `filetypes` : + ```lua + { "smt2", "tptp", "p", "cnf", "icnf", "zf" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dotls + +https://github.com/nikeee/dot-language-server + +`dot-language-server` can be installed via `npm`: +```sh +npm install -g dot-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dotls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dot-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "dot" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## dprint + +https://github.com/dprint/dprint + +Pluggable and configurable code formatting platform written in Rust. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.dprint.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dprint", "lsp" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "typescript", "typescriptreact", "json", "jsonc", "markdown", "python", "toml", "rust", "roslyn" } + ``` + - `root_dir` : + ```lua + <function 1> + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## drools_lsp + +https://github.com/kiegroup/drools-lsp + +Language server for the [Drools Rule Language (DRL)](https://docs.drools.org/latest/drools-docs/docs-website/drools/language-reference/#con-drl_drl-rules). + +The `drools-lsp` server is a self-contained java jar file (`drools-lsp-server-jar-with-dependencies.jar`), and can be downloaded from [https://github.com/kiegroup/drools-lsp/releases/](https://github.com/kiegroup/drools-lsp/releases/). + +Configuration information: +```lua +-- Option 1) Specify the entire command: +require('lspconfig').drools_lsp.setup { + cmd = { '/path/to/java', '-jar', '/path/to/drools-lsp-server-jar-with-dependencies.jar' }, +} + +-- Option 2) Specify just the jar path (the JAVA_HOME environment variable will be respected if present): +require('lspconfig').drools_lsp.setup { + drools = { jar = '/path/to/drools-lsp-server-jar-with-dependencies.jar' }, +} + +-- Option 3) Specify the java bin and/or java opts in addition to the jar path: +require('lspconfig').drools_lsp.setup { + drools = { + java = { bin = '/path/to/java', opts = { '-Xmx100m' } }, + jar = '/path/to/drools-lsp-server-jar-with-dependencies.jar', + }, +} +``` + +Neovim does not yet have automatic detection for the `drools` filetype, but it can be added with: +```lua +vim.cmd [[ autocmd BufNewFile,BufRead *.drl set filetype=drools ]] +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.drools_lsp.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "drools" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ds_pinyin_lsp + +https://github.com/iamcco/ds-pinyin-lsp +Dead simple Pinyin language server for input Chinese without IME(input method). +To install, download the latest [release](https://github.com/iamcco/ds-pinyin-lsp/releases) and ensure `ds-pinyin-lsp` is on your path. +And make ensure the database file `dict.db3` is also downloaded. And put the path to `dict.dbs` in the following code. + +```lua + +require('lspconfig').ds_pinyin_lsp.setup { + init_options = { + db_path = "your_path_to_database" + } +} + +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ds_pinyin_lsp.setup{} +``` +**Commands:** +- DsPinyinCompletionOff: Turn off the ds-pinyin-lsp completion +- DsPinyinCompletionOn: Turn on the ds-pinyin-lsp completion + +**Default values:** + - `cmd` : + ```lua + { "ds-pinyin-lsp" } + ``` + - `filetypes` : + ```lua + { "markdown", "org" } + ``` + - `init_options` : + ```lua + { + completion_on = true, + match_as_same_as_input = true, + match_long_input = true, + max_suggest = 15, + show_symbols = true, + show_symbols_by_n_times = 0, + show_symbols_only_follow_by_hanzi = false + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## earthlyls + +https://github.com/glehmann/earthlyls + +A fast language server for earthly. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.earthlyls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "earthlyls" } + ``` + - `filetypes` : + ```lua + { "earthfile" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## ecsact + +https://github.com/ecsact-dev/ecsact_lsp_server + +Language server for Ecsact. + +The default cmd assumes `ecsact_lsp_server` is in your PATH. Typically from the +Ecsact SDK: https://ecsact.dev/start + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ecsact.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ecsact_lsp_server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "ecsact" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## efm + +https://github.com/mattn/efm-langserver + +General purpose Language Server that can use specified error message format generated from specified command. + +Requires at minimum EFM version [v0.0.38](https://github.com/mattn/efm-langserver/releases/tag/v0.0.38) to support +launching the language server on single files. If on an older version of EFM, disable single file support: + +```lua +require('lspconfig')['efm'].setup{ + settings = ..., -- You must populate this according to the EFM readme + filetypes = ..., -- Populate this according to the note below + single_file_support = false, -- This is the important line for supporting older version of EFM +} +``` + +Note: In order for neovim's built-in language server client to send the appropriate `languageId` to EFM, **you must +specify `filetypes` in your call to `setup{}`**. Otherwise `lspconfig` will launch EFM on the `BufEnter` instead +of the `FileType` autocommand, and the `filetype` variable used to populate the `languageId` will not yet be set. + +```lua +require('lspconfig')['efm'].setup{ + settings = ..., -- You must populate this according to the EFM readme + filetypes = { 'python','cpp','lua' } +} +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.efm.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "efm-langserver" } + ``` + - `root_dir` : + ```lua + util.root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## elixirls + +https://github.com/elixir-lsp/elixir-ls + +`elixir-ls` can be installed by following the instructions [here](https://github.com/elixir-lsp/elixir-ls#building-and-running). + +```bash +curl -fLO https://github.com/elixir-lsp/elixir-ls/releases/latest/download/elixir-ls.zip +unzip elixir-ls.zip -d /path/to/elixir-ls +# Unix +chmod +x /path/to/elixir-ls/language_server.sh +``` + +**By default, elixir-ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped elixir-ls. + +```lua +require'lspconfig'.elixirls.setup{ + -- Unix + cmd = { "/path/to/elixir-ls/language_server.sh" }; + -- Windows + cmd = { "/path/to/elixir-ls/language_server.bat" }; + ... +} +``` + +'root_dir' is chosen like this: if two or more directories containing `mix.exs` were found when searching directories upward, the second one (higher up) is chosen, with the assumption that it is the root of an umbrella app. Otherwise the directory containing the single mix.exs that was found is chosen. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.elixirls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "elixir", "eelixir", "heex", "surface" } + ``` + - `root_dir` : + ```lua + {{see description above}} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## elmls + +https://github.com/elm-tooling/elm-language-server#installation + +If you don't want to use Nvim to install it, then you can use: +```sh +npm install -g elm elm-test elm-format @elm-tooling/elm-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.elmls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "elm-language-server" } + ``` + - `filetypes` : + ```lua + { "elm" } + ``` + - `init_options` : + ```lua + { + disableElmLSDiagnostics = false, + elmReviewDiagnostics = "off", + onlyUpdateDiagnosticsOnSave = false, + skipInstallPackageConfirmation = false + } + ``` + - `root_dir` : + ```lua + root_pattern("elm.json") + ``` + + +## elp + +https://whatsapp.github.io/erlang-language-platform + +ELP integrates Erlang into modern IDEs via the language server protocol and was +inspired by rust-analyzer. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.elp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "elp", "server" } + ``` + - `filetypes` : + ```lua + { "erlang" } + ``` + - `root_dir` : + ```lua + root_pattern('rebar.config', 'erlang.mk', '.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ember + +https://github.com/ember-tooling/ember-language-server + +`ember-language-server` can be installed via `npm`: + +```sh +npm install -g @ember-tooling/ember-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ember.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ember-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "handlebars", "typescript", "javascript", "typescript.glimmer", "javascript.glimmer" } + ``` + - `root_dir` : + ```lua + root_pattern("ember-cli-build.js", ".git") + ``` + + +## emmet_language_server + +https://github.com/olrtg/emmet-language-server + +Package can be installed via `npm`: +```sh +npm install -g @olrtg/emmet-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.emmet_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "emmet-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "css", "eruby", "html", "htmldjango", "javascriptreact", "less", "pug", "sass", "scss", "typescriptreact" } + ``` + - `root_dir` : + ```lua + git root + ``` + - `single_file_support` : + ```lua + true + ``` + + +## emmet_ls + +https://github.com/aca/emmet-ls + +Package can be installed via `npm`: +```sh +npm install -g emmet-ls +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.emmet_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "emmet-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "astro", "css", "eruby", "html", "htmldjango", "javascriptreact", "less", "pug", "sass", "scss", "svelte", "typescriptreact", "vue" } + ``` + - `root_dir` : + ```lua + git root + ``` + - `single_file_support` : + ```lua + true + ``` + + +## erg_language_server + +https://github.com/erg-lang/erg#flags ELS + +ELS (erg-language-server) is a language server for the Erg programming language. + +erg-language-server can be installed via `cargo` and used as follows: + ```sh + cargo install erg --features els + erg --language-server + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.erg_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "erg", "--language-server" } + ``` + - `filetypes` : + ```lua + { "erg" } + ``` + - `root_dir` : + ```lua + root_pattern("package.er") or find_git_ancestor + ``` + + +## erlangls + +https://erlang-ls.github.io + +Language Server for Erlang. + +Clone [erlang_ls](https://github.com/erlang-ls/erlang_ls) +Compile the project with `make` and copy resulting binaries somewhere in your $PATH eg. `cp _build/*/bin/* ~/local/bin` + +Installation instruction can be found [here](https://github.com/erlang-ls/erlang_ls). + +Installation requirements: + - [Erlang OTP 21+](https://github.com/erlang/otp) + - [rebar3 3.9.1+](https://github.com/erlang/rebar3) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.erlangls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "erlang_ls" } + ``` + - `filetypes` : + ```lua + { "erlang" } + ``` + - `root_dir` : + ```lua + root_pattern('rebar.config', 'erlang.mk', '.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## esbonio + +https://github.com/swyddfa/esbonio + +Esbonio is a language server for [Sphinx](https://www.sphinx-doc.org/en/master/) documentation projects. +The language server can be installed via pip + +``` +pip install esbonio +``` + +Since Sphinx is highly extensible you will get best results if you install the language server in the same +Python environment as the one used to build your documentation. To ensure that the correct Python environment +is picked up, you can either launch `nvim` with the correct environment activated. + +``` +source env/bin/activate +nvim +``` + +Or you can modify the default `cmd` to include the full path to the Python interpreter. + +```lua +require'lspconfig'.esbonio.setup { + cmd = { '/path/to/virtualenv/bin/python', '-m', 'esbonio' } +} +``` + +Esbonio supports a number of config values passed as `init_options` on startup, for example. + +```lua +require'lspconfig'.esbonio.setup { + init_options = { + server = { + logLevel = "debug" + }, + sphinx = { + confDir = "/path/to/docs", + srcDir = "${confDir}/../docs-src" + } +} +``` + +A full list and explanation of the available options can be found [here](https://docs.esbon.io/en/esbonio-language-server-v0.16.4/lsp/getting-started.html?editor=neovim-lspconfig#configuration) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.esbonio.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "python3", "-m", "esbonio" } + ``` + - `filetypes` : + ```lua + { "rst" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## eslint + +https://github.com/hrsh7th/vscode-langservers-extracted + +`vscode-eslint-language-server` is a linting engine for JavaScript / Typescript. +It can be installed via `npm`: + +```sh +npm i -g vscode-langservers-extracted +``` + +`vscode-eslint-language-server` provides an `EslintFixAll` command that can be used to format a document on save: +```lua +lspconfig.eslint.setup({ + --- ... + on_attach = function(client, bufnr) + vim.api.nvim_create_autocmd("BufWritePre", { + buffer = bufnr, + command = "EslintFixAll", + }) + end, +}) +``` + +See [vscode-eslint](https://github.com/microsoft/vscode-eslint/blob/55871979d7af184bf09af491b6ea35ebd56822cf/server/src/eslintServer.ts#L216-L229) for configuration options. + +Messages handled in lspconfig: `eslint/openDoc`, `eslint/confirmESLintExecution`, `eslint/probeFailed`, `eslint/noLibrary` + +Additional messages you can handle: `eslint/noConfig` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.eslint.setup{} +``` +**Commands:** +- EslintFixAll: Fix all eslint problems for this buffer + +**Default values:** + - `cmd` : + ```lua + { "vscode-eslint-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx", "vue", "svelte", "astro" } + ``` + - `handlers` : + ```lua + { + ["eslint/confirmESLintExecution"] = <function 1>, + ["eslint/noLibrary"] = <function 2>, + ["eslint/openDoc"] = <function 3>, + ["eslint/probeFailed"] = <function 4> + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + codeAction = { + disableRuleComment = { + enable = true, + location = "separateLine" + }, + showDocumentation = { + enable = true + } + }, + codeActionOnSave = { + enable = false, + mode = "all" + }, + experimental = { + useFlatConfig = false + }, + format = true, + nodePath = "", + onIgnoredFiles = "off", + problems = { + shortenToSingleLine = false + }, + quiet = false, + rulesCustomizations = {}, + run = "onType", + useESLintClass = false, + validate = "on", + workingDirectory = { + mode = "location" + } + } + ``` + + +## facility_language_server + +https://github.com/FacilityApi/FacilityLanguageServer + +Facility language server protocol (LSP) support. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.facility_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "facility-language-server" } + ``` + - `filetypes` : + ```lua + { "fsd" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## fennel_language_server + +https://github.com/rydesun/fennel-language-server + +Fennel language server protocol (LSP) support. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fennel_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "fennel-language-server" } + ``` + - `filetypes` : + ```lua + { "fennel" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## fennel_ls + +https://sr.ht/~xerool/fennel-ls/ + +A language server for fennel. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fennel_ls.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + { + general = { + positionEncodings = { "utf-16" } + }, + offsetEncoding = { "utf-8", "utf-16" }, + textDocument = { + callHierarchy = { + dynamicRegistration = false + }, + codeAction = { + codeActionLiteralSupport = { + codeActionKind = { + valueSet = { "", "quickfix", "refactor", "refactor.extract", "refactor.inline", "refactor.rewrite", "source", "source.organizeImports" } + } + }, + dataSupport = true, + dynamicRegistration = true, + isPreferredSupport = true, + resolveSupport = { + properties = { "edit" } + } + }, + completion = { + completionItem = { + commitCharactersSupport = false, + deprecatedSupport = false, + documentationFormat = { "markdown", "plaintext" }, + preselectSupport = false, + snippetSupport = false + }, + completionItemKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 } + }, + completionList = { + itemDefaults = { "editRange", "insertTextFormat", "insertTextMode", "data" } + }, + contextSupport = false, + dynamicRegistration = false + }, + declaration = { + linkSupport = true + }, + definition = { + dynamicRegistration = true, + linkSupport = true + }, + diagnostic = { + dynamicRegistration = false + }, + documentHighlight = { + dynamicRegistration = false + }, + documentSymbol = { + dynamicRegistration = false, + hierarchicalDocumentSymbolSupport = true, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + formatting = { + dynamicRegistration = true + }, + hover = { + contentFormat = { "markdown", "plaintext" }, + dynamicRegistration = true + }, + implementation = { + linkSupport = true + }, + inlayHint = { + dynamicRegistration = true, + resolveSupport = { + properties = { "textEdits", "tooltip", "location", "command" } + } + }, + publishDiagnostics = { + dataSupport = true, + relatedInformation = true, + tagSupport = { + valueSet = { 1, 2 } + } + }, + rangeFormatting = { + dynamicRegistration = true + }, + references = { + dynamicRegistration = false + }, + rename = { + dynamicRegistration = true, + prepareSupport = true + }, + semanticTokens = { + augmentsSyntaxTokens = true, + dynamicRegistration = false, + formats = { "relative" }, + multilineTokenSupport = false, + overlappingTokenSupport = true, + requests = { + full = { + delta = true + }, + range = false + }, + serverCancelSupport = false, + tokenModifiers = { "declaration", "definition", "readonly", "static", "deprecated", "abstract", "async", "modification", "documentation", "defaultLibrary" }, + tokenTypes = { "namespace", "type", "class", "enum", "interface", "struct", "typeParameter", "parameter", "variable", "property", "enumMember", "event", "function", "method", "macro", "keyword", "modifier", "comment", "string", "number", "regexp", "operator", "decorator" } + }, + signatureHelp = { + dynamicRegistration = false, + signatureInformation = { + activeParameterSupport = true, + documentationFormat = { "markdown", "plaintext" }, + parameterInformation = { + labelOffsetSupport = true + } + } + }, + synchronization = { + didSave = true, + dynamicRegistration = false, + willSave = true, + willSaveWaitUntil = true + }, + typeDefinition = { + linkSupport = true + } + }, + window = { + showDocument = { + support = true + }, + showMessage = { + messageActionItem = { + additionalPropertiesSupport = false + } + }, + workDoneProgress = true + }, + workspace = { + applyEdit = true, + configuration = true, + didChangeConfiguration = { + dynamicRegistration = false + }, + didChangeWatchedFiles = { + dynamicRegistration = false, + relativePatternSupport = true + }, + inlayHint = { + refreshSupport = true + }, + semanticTokens = { + refreshSupport = true + }, + symbol = { + dynamicRegistration = false, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + workspaceEdit = { + resourceOperations = { "rename", "create", "delete" } + }, + workspaceFolders = true + } + } + ``` + - `cmd` : + ```lua + { "fennel-ls" } + ``` + - `filetypes` : + ```lua + { "fennel" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## flow + +https://flow.org/ +https://github.com/facebook/flow + +See below for how to setup Flow itself. +https://flow.org/en/docs/install/ + +See below for lsp command options. + +```sh +npx flow lsp --help +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.flow.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "npx", "--no-install", "flow", "lsp" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx" } + ``` + - `root_dir` : + ```lua + root_pattern(".flowconfig") + ``` + + +## flux_lsp + +https://github.com/influxdata/flux-lsp +`flux-lsp` can be installed via `cargo`: +```sh +cargo install --git https://github.com/influxdata/flux-lsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.flux_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "flux-lsp" } + ``` + - `filetypes` : + ```lua + { "flux" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## foam_ls + +https://github.com/FoamScience/foam-language-server + +`foam-language-server` can be installed via `npm` +```sh +npm install -g foam-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.foam_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "foam-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "foam", "OpenFOAM" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## fortls + +https://github.com/gnikit/fortls + +fortls is a Fortran Language Server, the server can be installed via pip + +```sh +pip install fortls +``` + +Settings to the server can be passed either through the `cmd` option or through +a local configuration file e.g. `.fortls`. For more information +see the `fortls` [documentation](https://gnikit.github.io/fortls/options.html). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fortls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "fortls", "--notify_init", "--hover_signature", "--hover_language=fortran", "--use_signature_help" } + ``` + - `filetypes` : + ```lua + { "fortran" } + ``` + - `root_dir` : + ```lua + root_pattern(".fortls") + ``` + - `settings` : + ```lua + {} + ``` + + +## fsautocomplete + +https://github.com/fsharp/FsAutoComplete + +Language Server for F# provided by FsAutoComplete (FSAC). + +FsAutoComplete requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. + +The preferred way to install FsAutoComplete is with `dotnet tool install --global fsautocomplete`. + +Instructions to compile from source are found on the main [repository](https://github.com/fsharp/FsAutoComplete). + +You may also need to configure the filetype as Vim defaults to Forth for `*.fs` files: + +`autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp` + +This is automatically done by plugins such as [PhilT/vim-fsharp](https://github.com/PhilT/vim-fsharp), [fsharp/vim-fsharp](https://github.com/fsharp/vim-fsharp), and [adelarsq/neofsharp.vim](https://github.com/adelarsq/neofsharp.vim). + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fsautocomplete.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "fsautocomplete", "--adaptive-lsp-server-enabled" } + ``` + - `filetypes` : + ```lua + { "fsharp" } + ``` + - `init_options` : + ```lua + { + AutomaticWorkspaceInit = true + } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## fsharp_language_server + +F# Language Server +https://github.com/faldor20/fsharp-language-server + +An implementation of the language server protocol using the F# Compiler Service. + +Build the project from source and override the command path to location of DLL. + +If filetype determination is not already performed by an available plugin ([PhilT/vim-fsharp](https://github.com/PhilT/vim-fsharp), [fsharp/vim-fsharp](https://github.com/fsharp/vim-fsharp), and [adelarsq/neofsharp.vim](https://github.com/adelarsq/neofsharp.vim). +), then the following must be added to initialization configuration: + + +`autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fsharp_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "dotnet", "FSharpLanguageServer.dll" } + ``` + - `filetypes` : + ```lua + { "fsharp" } + ``` + - `init_options` : + ```lua + { + AutomaticWorkspaceInit = true + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## fstar + +https://github.com/FStarLang/FStar + +LSP support is included in FStar. Make sure `fstar.exe` is in your PATH. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.fstar.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "fstar.exe", "--lsp" } + ``` + - `filetypes` : + ```lua + { "fstar" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## futhark_lsp + +https://github.com/diku-dk/futhark + +Futhark Language Server + +This language server comes with the futhark compiler and is run with the command +``` +futhark lsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.futhark_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "futhark", "lsp" } + ``` + - `filetypes` : + ```lua + { "futhark", "fut" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## gdscript + +https://github.com/godotengine/godot + +Language server for GDScript, used by Godot Engine. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gdscript.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + see source file + ``` + - `filetypes` : + ```lua + { "gd", "gdscript", "gdscript3" } + ``` + - `root_dir` : + ```lua + util.root_pattern("project.godot", ".git") + ``` + + +## gdshader_lsp + +https://github.com/godofavacyn/gdshader-lsp + +A language server for the Godot Shading language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gdshader_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "gdshader-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "gdshader", "gdshaderinc" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## ghcide + +https://github.com/digital-asset/ghcide + +A library for building Haskell IDE tooling. +"ghcide" isn't for end users now. Use "haskell-language-server" instead of "ghcide". + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ghcide.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ghcide", "--lsp" } + ``` + - `filetypes` : + ```lua + { "haskell", "lhaskell" } + ``` + - `root_dir` : + ```lua + root_pattern("stack.yaml", "hie-bios", "BUILD.bazel", "cabal.config", "package.yaml") + ``` + + +## ghdl_ls + +https://github.com/ghdl/ghdl-language-server + +A language server for VHDL, using ghdl as its backend. + +`ghdl-ls` is part of pyghdl, for installation instructions see +[the upstream README](https://github.com/ghdl/ghdl/tree/master/pyGHDL/lsp). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ghdl_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ghdl-ls" } + ``` + - `filetypes` : + ```lua + { "vhdl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ginko_ls + +`ginko_ls` is meant to be a feature-complete language server for device-trees. +Language servers can be used in many editors, such as Visual Studio Code, Emacs +or Vim + +Install `ginko_ls` from https://github.com/Schottkyc137/ginko and add it to path + +`ginko_ls` doesn't require any configuration. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ginko_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ginko_ls" } + ``` + - `filetypes` : + ```lua + { "dts" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## gitlab_ci_ls + +https://github.com/alesbrelih/gitlab-ci-ls + +Language Server for Gitlab CI + +`gitlab-ci-ls` can be installed via cargo: +cargo install gitlab-ci-ls + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gitlab_ci_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "gitlab-ci-ls" } + ``` + - `filetypes` : + ```lua + { "yaml.gitlab" } + ``` + - `init_options` : + ```lua + { + cache_path = "util.path.join(vim.loop.os_homedir(), '.cache/gitlab-ci-ls/')", + log_path = "util.path.join(util.path.join(vim.loop.os_homedir(), '.cache/gitlab-ci-ls/'), 'log/gitlab-ci-ls.log')" + } + ``` + - `root_dir` : + ```lua + util.root_pattern('.gitlab*', '.git') + ``` + + +## gleam + +https://github.com/gleam-lang/gleam + +A language server for Gleam Programming Language. +[Installation](https://gleam.run/getting-started/installing/) + +It can be i + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gleam.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "gleam", "lsp" } + ``` + - `filetypes` : + ```lua + { "gleam" } + ``` + - `root_dir` : + ```lua + root_pattern("gleam.toml", ".git") + ``` + + +## glint + + https://github.com/typed-ember/glint + + https://typed-ember.gitbook.io/glint/ + + `glint-language-server` is installed when adding `@glint/core` to your project's devDependencies: + + ```sh + npm install @glint/core --save-dev + ``` + + or + + ```sh + yarn add -D @glint/core + ``` + + or + + ```sh + pnpm add -D @glint/core + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.glint.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "glint-language-server" } + ``` + - `filetypes` : + ```lua + { "html.handlebars", "handlebars", "typescript", "typescript.glimmer", "javascript", "javascript.glimmer" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## glsl_analyzer + +https://github.com/nolanderc/glsl_analyzer + +Language server for GLSL + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.glsl_analyzer.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + {} + ``` + - `cmd` : + ```lua + { "glsl_analyzer" } + ``` + - `filetypes` : + ```lua + { "glsl", "vert", "tesc", "tese", "frag", "geom", "comp" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## glslls + +https://github.com/svenstaro/glsl-language-server + +Language server implementation for GLSL + +`glslls` can be compiled and installed manually, or, if your distribution has access to the AUR, +via the `glsl-language-server` AUR package + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.glslls.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + { + offsetEncoding = { "utf-8", "utf-16" }, + textDocument = { + completion = { + editsNearCursor = true + } + } + } + ``` + - `cmd` : + ```lua + { "glslls", "--stdin" } + ``` + - `filetypes` : + ```lua + { "glsl", "vert", "tesc", "tese", "frag", "geom", "comp" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## golangci_lint_ls + +Combination of both lint server and client + +https://github.com/nametake/golangci-lint-langserver +https://github.com/golangci/golangci-lint + + +Installation of binaries needed is done via + +``` +go install github.com/nametake/golangci-lint-langserver@latest +go install github.com/golangci/golangci-lint/cmd/golangci-lint@latest +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.golangci_lint_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "golangci-lint-langserver" } + ``` + - `filetypes` : + ```lua + { "go", "gomod" } + ``` + - `init_options` : + ```lua + { + command = { "golangci-lint", "run", "--out-format", "json" } + } + ``` + - `root_dir` : + ```lua + root_pattern('.golangci.yml', '.golangci.yaml', '.golangci.toml', '.golangci.json', 'go.work', 'go.mod', '.git') + ``` + + +## gopls + +https://github.com/golang/tools/tree/master/gopls + +Google's lsp server for golang. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gopls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "gopls" } + ``` + - `filetypes` : + ```lua + { "go", "gomod", "gowork", "gotmpl" } + ``` + - `root_dir` : + ```lua + root_pattern("go.work", "go.mod", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## gradle_ls + +https://github.com/microsoft/vscode-gradle + +Microsoft's lsp server for gradle files + +If you're setting this up manually, build vscode-gradle using `./gradlew installDist` and point `cmd` to the `gradle-language-server` generated in the build directory + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.gradle_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "gradle-language-server" } + ``` + - `filetypes` : + ```lua + { "groovy" } + ``` + - `init_options` : + ```lua + { + settings = { + gradleWrapperEnabled = true + } + } + ``` + - `root_dir` : + ```lua + root_pattern("settings.gradle", "build.gradle") + ``` + + +## grammarly + +https://github.com/znck/grammarly + +`grammarly-languageserver` can be installed via `npm`: + +```sh +npm i -g grammarly-languageserver +``` + +WARNING: Since this language server uses Grammarly's API, any document you open with it running is shared with them. Please evaluate their [privacy policy](https://www.grammarly.com/privacy-policy) before using this. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.grammarly.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "grammarly-languageserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "markdown" } + ``` + - `handlers` : + ```lua + { + ["$/updateDocumentState"] = <function 1> + } + ``` + - `init_options` : + ```lua + { + clientId = "client_BaDkMgx4X19X9UxxYRCXZo" + } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## graphql + +https://github.com/graphql/graphiql/tree/main/packages/graphql-language-service-cli + +`graphql-lsp` can be installed via `npm`: + +```sh +npm install -g graphql-language-service-cli +``` + +Note that you must also have [the graphql package](https://github.com/graphql/graphql-js) installed within your project and create a [GraphQL config file](https://the-guild.dev/graphql/config/docs). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.graphql.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "graphql-lsp", "server", "-m", "stream" } + ``` + - `filetypes` : + ```lua + { "graphql", "typescriptreact", "javascriptreact" } + ``` + - `root_dir` : + ```lua + util.root_pattern('.git', '.graphqlrc*', '.graphql.config.*', 'graphql.config.*') + ``` + + +## groovyls + +https://github.com/prominic/groovy-language-server.git + +Requirements: + - Linux/macOS (for now) + - Java 11+ + +`groovyls` can be installed by following the instructions [here](https://github.com/prominic/groovy-language-server.git#build). + +If you have installed groovy language server, you can set the `cmd` custom path as follow: + +```lua +require'lspconfig'.groovyls.setup{ + -- Unix + cmd = { "java", "-jar", "path/to/groovyls/groovy-language-server-all.jar" }, + ... +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.groovyls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "java", "-jar", "groovy-language-server-all.jar" } + ``` + - `filetypes` : + ```lua + { "groovy" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## guile_ls + +https://codeberg.org/rgherdt/scheme-lsp-server + +The recommended way is to install guile-lsp-server is using Guix. Unfortunately it is still not available at the official Guix channels, but you can use the provided channel guix.scm in the repo: +```sh +guix package -f guix.scm +``` + +Checkout the repo for more info. + +Note: This LSP will start on `scheme.guile` filetype. You can set this file type using `:help modeline` or adding https://gitlab.com/HiPhish/guile.vim to your plugins to automatically set it. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.guile_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "guile-lsp-server" } + ``` + - `filetypes` : + ```lua + { "scheme.guile" } + ``` + - `root_dir` : + ```lua + root_pattern("guix.scm", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## harper_ls + +https://github.com/chilipepperhott/harper + +The language server for Harper, the slim, clean language checker for developers. + +See [docs](https://github.com/chilipepperhott/harper/tree/master/harper-ls#configuration) for more information on settings. + +In short, however, they should look something like this: +```lua +lspconfig.harper_ls.setup { + settings = { + ["harper-ls"] = { + userDictPath = "~/dict.txt" + } + }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.harper_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "harper-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "markdown", "rust", "typescript", "typescriptreact", "javascript", "python", "go", "c", "cpp", "ruby", "swift", "csharp", "toml", "lua" } + ``` + - `root_dir` : + ```lua + bufdir + ``` + - `single_file_support` : + ```lua + true + ``` + + +## haxe_language_server + +https://github.com/vshaxe/haxe-language-server + +The Haxe language server can be built by running the following commands from +the project's root directory: + + npm install + npx lix run vshaxe-build -t language-server + +This will create `bin/server.js`. Note that the server requires Haxe 3.4.0 or +higher. + +After building the language server, set the `cmd` setting in your setup +function: + +```lua +lspconfig.haxe_language_server.setup({ + cmd = {"node", "path/to/bin/server.js"}, +}) +``` + +By default, an HXML compiler arguments file named `build.hxml` is expected in +your project's root directory. If your file is named something different, +specify it using the `init_options.displayArguments` setting. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.haxe_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "haxe-language-server" } + ``` + - `filetypes` : + ```lua + { "haxe" } + ``` + - `init_options` : + ```lua + { + displayArguments = { "build.hxml" } + } + ``` + - `root_dir` : + ```lua + root_pattern("*.hxml") + ``` + - `settings` : + ```lua + { + haxe = { + executable = "haxe" + } + } + ``` + + +## hdl_checker + +https://github.com/suoto/hdl_checker +Language server for hdl-checker. +Install using: `pip install hdl-checker --upgrade` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hdl_checker.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hdl_checker", "--lsp" } + ``` + - `filetypes` : + ```lua + { "vhdl", "verilog", "systemverilog" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## helm_ls + +https://github.com/mrjosh/helm-ls + +Helm Language server. (This LSP is in early development) + +`helm Language server` can be installed by following the instructions [here](https://github.com/mrjosh/helm-ls). + +The default `cmd` assumes that the `helm_ls` binary can be found in `$PATH`. + +If need Helm file highlight use [vim-helm](https://github.com/towolf/vim-helm) plugin. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.helm_ls.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + default capabilities, with dynamicRegistration for didChangeWatchedFiles true + ``` + - `cmd` : + ```lua + { "helm_ls", "serve" } + ``` + - `filetypes` : + ```lua + { "helm" } + ``` + - `root_dir` : + ```lua + root_pattern("Chart.yaml") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## hhvm + +Language server for programs written in Hack +https://hhvm.com/ +https://github.com/facebook/hhvm +See below for how to setup HHVM & typechecker: +https://docs.hhvm.com/hhvm/getting-started/getting-started + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hhvm.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hh_client", "lsp" } + ``` + - `filetypes` : + ```lua + { "php", "hack" } + ``` + - `root_dir` : + ```lua + root_pattern(".hhconfig") + ``` + + +## hie + +https://github.com/haskell/haskell-ide-engine + +the following init_options are supported (see https://github.com/haskell/haskell-ide-engine#configuration): +```lua +init_options = { + languageServerHaskell = { + hlintOn = bool; + maxNumberOfProblems = number; + diagnosticsDebounceDuration = number; + liquidOn = bool (default false); + completionSnippetsOn = bool (default true); + formatOnImportOn = bool (default true); + formattingProvider = string (default "brittany", alternate "floskell"); + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hie.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hie-wrapper", "--lsp" } + ``` + - `filetypes` : + ```lua + { "haskell" } + ``` + - `root_dir` : + ```lua + root_pattern("stack.yaml", "package.yaml", ".git") + ``` + + +## hlasm + + `hlasm_language_server` is a language server for the High Level Assembler language used on IBM SystemZ mainframes. + + To learn how to configure the HLASM language server, see the [HLASM Language Support documentation](https://github.com/eclipse-che4z/che-che4z-lsp-for-hlasm). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hlasm.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hlasm_language_server" } + ``` + - `filetypes` : + ```lua + { "hlasm" } + ``` + - `root_dir` : + ```lua + root_pattern(".hlasmplugin") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## hls + +https://github.com/haskell/haskell-language-server + +Haskell Language Server + +If you are using HLS 1.9.0.0, enable the language server to launch on Cabal files as well: + +```lua +require('lspconfig')['hls'].setup{ + filetypes = { 'haskell', 'lhaskell', 'cabal' }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "haskell-language-server-wrapper", "--lsp" } + ``` + - `filetypes` : + ```lua + { "haskell", "lhaskell" } + ``` + - `lspinfo` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("hie.yaml", "stack.yaml", "cabal.project", "*.cabal", "package.yaml") + ``` + - `settings` : + ```lua + { + haskell = { + cabalFormattingProvider = "cabalfmt", + formattingProvider = "ormolu" + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## hoon_ls + +https://github.com/urbit/hoon-language-server + +A language server for Hoon. + +The language server can be installed via `npm install -g @hoon-language-server` + +Start a fake ~zod with `urbit -F zod`. +Start the language server at the Urbit Dojo prompt with: `|start %language-server` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hoon_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hoon-language-server" } + ``` + - `filetypes` : + ```lua + { "hoon" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## html + +https://github.com/hrsh7th/vscode-langservers-extracted + +`vscode-html-language-server` can be installed via `npm`: +```sh +npm i -g vscode-langservers-extracted +``` + +Neovim does not currently include built-in snippets. `vscode-html-language-server` only provides completions when snippet support is enabled. +To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. + +The code-formatting feature of the lsp can be controlled with the `provideFormatter` option. + +```lua +--Enable (broadcasting) snippet capability for completion +local capabilities = vim.lsp.protocol.make_client_capabilities() +capabilities.textDocument.completion.completionItem.snippetSupport = true + +require'lspconfig'.html.setup { + capabilities = capabilities, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.html.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vscode-html-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "html", "templ" } + ``` + - `init_options` : + ```lua + { + configurationSection = { "html", "css", "javascript" }, + embeddedLanguages = { + css = true, + javascript = true + }, + provideFormatter = true + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## htmx + +https://github.com/ThePrimeagen/htmx-lsp + +`htmx-lsp` can be installed via `cargo`: +```sh +cargo install htmx-lsp +``` + +Lsp is still very much work in progress and experimental. Use at your own risk. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.htmx.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "htmx-lsp" } + ``` + - `filetypes` : + ```lua + { "html", "templ" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## hydra_lsp + +https://github.com/Retsediv/hydra-lsp + +LSP for Hydra Python package config files. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hydra_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hydra-lsp" } + ``` + - `filetypes` : + ```lua + { "yaml" } + ``` + - `root_dir` : + ```lua + util.root_pattern '.git' + ``` + - `single_file_support` : + ```lua + true + ``` + + +## hyprls + +https://github.com/hyprland-community/hyprls + +`hyprls` can be installed via `go`: +```sh +go install github.com/ewen-lbh/hyprls/cmd/hyprls@latest +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.hyprls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "hyprls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "*.hl", "hypr*.conf", ".config/hypr/*.conf" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## idris2_lsp + +https://github.com/idris-community/idris2-lsp + +The Idris 2 language server. + +Plugins for the Idris 2 filetype include +[Idris2-Vim](https://github.com/edwinb/idris2-vim) (fewer features, stable) and +[Nvim-Idris2](https://github.com/ShinKage/nvim-idris2) (cutting-edge, +experimental). + +Idris2-Lsp requires a build of Idris 2 that includes the "Idris 2 API" package. +Package managers with known support for this build include the +[AUR](https://aur.archlinux.org/packages/idris2/) and +[Homebrew](https://formulae.brew.sh/formula/idris2#default). + +If your package manager does not support the Idris 2 API, you will need to build +Idris 2 from source. Refer to the +[the Idris 2 installation instructions](https://github.com/idris-lang/Idris2/blob/main/INSTALL.md) +for details. Steps 5 and 8 are listed as "optional" in that guide, but they are +necessary in order to make the Idris 2 API available. + +You need to install a version of Idris2-Lsp that is compatible with your +version of Idris 2. There should be a branch corresponding to every released +Idris 2 version after v0.4.0. Use the latest commit on that branch. For example, +if you have Idris v0.5.1, you should use the v0.5.1 branch of Idris2-Lsp. + +If your Idris 2 version is newer than the newest Idris2-Lsp branch, use the +latest commit on the `master` branch, and set a reminder to check the Idris2-Lsp +repo for the release of a compatible versioned branch. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.idris2_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "idris2-lsp" } + ``` + - `filetypes` : + ```lua + { "idris2" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## intelephense + +https://intelephense.com/ + +`intelephense` can be installed via `npm`: +```sh +npm install -g intelephense +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.intelephense.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "intelephense", "--stdio" } + ``` + - `filetypes` : + ```lua + { "php" } + ``` + - `root_dir` : + ```lua + root_pattern("composer.json", ".git") + ``` + + +## java_language_server + +https://github.com/georgewfraser/java-language-server + +Java language server + +Point `cmd` to `lang_server_linux.sh` or the equivalent script for macOS/Windows provided by java-language-server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.java_language_server.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "java" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## jdtls + +https://projects.eclipse.org/projects/eclipse.jdt.ls + +Language server for Java. + +IMPORTANT: If you want all the features jdtls has to offer, [nvim-jdtls](https://github.com/mfussenegger/nvim-jdtls) +is highly recommended. If all you need is diagnostics, completion, imports, gotos and formatting and some code actions +you can keep reading here. + +For manual installation you can download precompiled binaries from the +[official downloads site](http://download.eclipse.org/jdtls/snapshots/?d) +and ensure that the `PATH` variable contains the `bin` directory of the extracted archive. + +```lua + -- init.lua + require'lspconfig'.jdtls.setup{} +``` + +You can also pass extra custom jvm arguments with the JDTLS_JVM_ARGS environment variable as a space separated list of arguments, +that will be converted to multiple --jvm-arg=<param> args when passed to the jdtls script. This will allow for example tweaking +the jvm arguments or integration with external tools like lombok: + +```sh +export JDTLS_JVM_ARGS="-javaagent:$HOME/.local/share/java/lombok.jar" +``` + +For automatic installation you can use the following unofficial installers/launchers under your own risk: + - [jdtls-launcher](https://github.com/eruizc-dev/jdtls-launcher) (Includes lombok support by default) + ```lua + -- init.lua + require'lspconfig'.jdtls.setup{ cmd = { 'jdtls' } } + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jdtls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "jdtls", "-configuration", "/home/user/.cache/jdtls/config", "-data", "/home/user/.cache/jdtls/workspace" } + ``` + - `filetypes` : + ```lua + { "java" } + ``` + - `handlers` : + ```lua + { + ["language/status"] = <function 1>, + ["textDocument/codeAction"] = <function 2>, + ["textDocument/rename"] = <function 3>, + ["workspace/applyEdit"] = <function 4> + } + ``` + - `init_options` : + ```lua + { + jvm_args = {}, + workspace = "/home/user/.cache/jdtls/workspace" + } + ``` + - `root_dir` : + ```lua + { + -- Single-module projects + { + 'build.xml', -- Ant + 'pom.xml', -- Maven + 'settings.gradle', -- Gradle + 'settings.gradle.kts', -- Gradle + }, + -- Multi-module projects + { 'build.gradle', 'build.gradle.kts' }, + } or vim.fn.getcwd() + ``` + - `single_file_support` : + ```lua + true + ``` + + +## jedi_language_server + +https://github.com/pappasam/jedi-language-server + +`jedi-language-server`, a language server for Python, built on top of jedi + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jedi_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "jedi-language-server" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + vim's starting directory + ``` + - `single_file_support` : + ```lua + true + ``` + + +## jinja_lsp + +jinja-lsp enhances minijinja development experience by providing Helix/Nvim users with advanced features such as autocomplete, syntax highlighting, hover, goto definition, code actions and linting. + +The file types are not detected automatically, you can register them manually (see below) or override the filetypes: + +```lua +vim.filetype.add { + extension = { + jinja = 'jinja', + jinja2 = 'jinja', + j2 = 'jinja', + }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jinja_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "jinja-lsp" } + ``` + - `filetypes` : + ```lua + { "jinja" } + ``` + - `name` : + ```lua + "jinja_lsp" + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## jqls + +https://github.com/wader/jq-lsp +Language server for jq, written using Go. +You can install the server easily using go install: +```sh +# install directly +go install github.com/wader/jq-lsp@master +# copy binary to $PATH +cp $(go env GOPATH)/bin/jq-lsp /usr/local/bin +``` +Note: To activate properly nvim needs to know the jq filetype. +You can add it via: +```lua +vim.cmd(\[\[au BufRead,BufNewFile *.jq setfiletype jq\]\]) +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jqls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "jq-lsp" } + ``` + - `filetypes` : + ```lua + { "jq" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## jsonls + +https://github.com/hrsh7th/vscode-langservers-extracted + +vscode-json-language-server, a language server for JSON and JSON schema + +`vscode-json-language-server` can be installed via `npm`: +```sh +npm i -g vscode-langservers-extracted +``` + +Neovim does not currently include built-in snippets. `vscode-json-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. + +```lua +--Enable (broadcasting) snippet capability for completion +local capabilities = vim.lsp.protocol.make_client_capabilities() +capabilities.textDocument.completion.completionItem.snippetSupport = true + +require'lspconfig'.jsonls.setup { + capabilities = capabilities, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jsonls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vscode-json-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "json", "jsonc" } + ``` + - `init_options` : + ```lua + { + provideFormatter = true + } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## jsonnet_ls + +https://github.com/grafana/jsonnet-language-server + +A Language Server Protocol (LSP) server for Jsonnet. + +The language server can be installed with `go`: +```sh +go install github.com/grafana/jsonnet-language-server@latest +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.jsonnet_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "jsonnet-language-server" } + ``` + - `filetypes` : + ```lua + { "jsonnet", "libsonnet" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("jsonnetfile.json") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## julials + +https://github.com/julia-vscode/julia-vscode + +LanguageServer.jl can be installed with `julia` and `Pkg`: +```sh +julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.add("LanguageServer")' +``` +where `~/.julia/environments/nvim-lspconfig` is the location where +the default configuration expects LanguageServer.jl to be installed. + +To update an existing install, use the following command: +```sh +julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.update()' +``` + +Note: In order to have LanguageServer.jl pick up installed packages or dependencies in a +Julia project, you must make sure that the project is instantiated: +```sh +julia --project=/path/to/my/project -e 'using Pkg; Pkg.instantiate()' +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.julials.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "julia", "--startup-file=no", "--history-file=no", "-e", ' # Load LanguageServer.jl: attempt to load from ~/.julia/environments/nvim-lspconfig\n # with the regular load path as a fallback\n ls_install_path = joinpath(\n get(DEPOT_PATH, 1, joinpath(homedir(), ".julia")),\n "environments", "nvim-lspconfig"\n )\n pushfirst!(LOAD_PATH, ls_install_path)\n using LanguageServer\n popfirst!(LOAD_PATH)\n depot_path = get(ENV, "JULIA_DEPOT_PATH", "")\n project_path = let\n dirname(something(\n ## 1. Finds an explicitly set project (JULIA_PROJECT)\n Base.load_path_expand((\n p = get(ENV, "JULIA_PROJECT", nothing);\n p === nothing ? nothing : isempty(p) ? nothing : p\n )),\n ## 2. Look for a Project.toml file in the current working directory,\n ## or parent directories, with $HOME as an upper boundary\n Base.current_project(),\n ## 3. First entry in the load path\n get(Base.load_path(), 1, nothing),\n ## 4. Fallback to default global environment,\n ## this is more or less unreachable\n Base.load_path_expand("@v#.#"),\n ))\n end\n @info "Running language server" VERSION pwd() project_path depot_path\n server = LanguageServer.LanguageServerInstance(stdin, stdout, project_path, depot_path)\n server.runlinter = true\n run(server)\n ' } + ``` + - `filetypes` : + ```lua + { "julia" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## koka + + https://koka-lang.github.io/koka/doc/index.html +Koka is a functional programming language with effect types and handlers. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.koka.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + default capabilities, with offsetEncoding utf-8 + ``` + - `cmd` : + ```lua + { "koka", "--language-server" } + ``` + - `filetypes` : + ```lua + { "kk" } + ``` + - `root_dir` : + ```lua + + ``` + - `single_file_support` : + ```lua + true + ``` + + +## kotlin_language_server + + A kotlin language server which was developed for internal usage and + released afterwards. Maintaining is not done by the original author, + but by fwcd. + + It is built via gradle and developed on github. + Source and additional description: + https://github.com/fwcd/kotlin-language-server + + This server requires vim to be aware of the kotlin-filetype. + You could refer for this capability to: + https://github.com/udalov/kotlin-vim (recommended) + Note that there is no LICENSE specified yet. + + For faster startup, you can setup caching by specifying a storagePath + in the init_options. The default is your home directory. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.kotlin_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "kotlin-language-server" } + ``` + - `filetypes` : + ```lua + { "kotlin" } + ``` + - `init_options` : + ```lua + { + storagePath = "Enables caching and use project root to store cache data. See source" + } + ``` + - `root_dir` : + ```lua + See source + ``` + + +## lean3ls + +https://github.com/leanprover/lean-client-js/tree/master/lean-language-server + +Lean installation instructions can be found +[here](https://leanprover-community.github.io/get_started.html#regular-install). + +Once Lean is installed, you can install the Lean 3 language server by running +```sh +npm install -g lean-language-server +``` + +Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim), +that plugin fully handles the setup of the Lean language server, +and you shouldn't set up `lean3ls` both with it and `lspconfig`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lean3ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lean-language-server", "--stdio", "--", "-M", "4096", "-T", "100000" } + ``` + - `filetypes` : + ```lua + { "lean3" } + ``` + - `offset_encoding` : + ```lua + "utf-32" + ``` + - `root_dir` : + ```lua + root_pattern("leanpkg.toml") or root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## leanls + +https://github.com/leanprover/lean4 + +Lean installation instructions can be found +[here](https://leanprover-community.github.io/get_started.html#regular-install). + +The Lean 4 language server is built-in with a Lean 4 install +(and can be manually run with, e.g., `lean --server`). + +Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim), +that plugin fully handles the setup of the Lean language server, +and you shouldn't set up `leanls` both with it and `lspconfig`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.leanls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lake", "serve", "--" } + ``` + - `filetypes` : + ```lua + { "lean" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `options` : + ```lua + { + no_lake_lsp_cmd = { "lean", "--server" } + } + ``` + - `root_dir` : + ```lua + root_pattern("lakefile.lean", "lean-toolchain", "leanpkg.toml", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## lelwel_ls + +https://github.com/0x2a-42/lelwel + +Language server for lelwel grammars. + +You can install `lelwel-ls` via cargo: +```sh +cargo install --features="lsp" lelwel +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lelwel_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lelwel-ls" } + ``` + - `filetypes` : + ```lua + { "llw" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## lemminx + +https://github.com/eclipse/lemminx + +The easiest way to install the server is to get a binary from https://github.com/redhat-developer/vscode-xml/releases and place it on your PATH. + +NOTE to macOS users: Binaries from unidentified developers are blocked by default. If you trust the downloaded binary, run it once, cancel the prompt, then remove the binary from Gatekeeper quarantine with `xattr -d com.apple.quarantine lemminx`. It should now run without being blocked. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lemminx.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lemminx" } + ``` + - `filetypes` : + ```lua + { "xml", "xsd", "xsl", "xslt", "svg" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## lexical + + https://github.com/lexical-lsp/lexical + + Lexical is a next-generation language server for the Elixir programming language. + + Follow the [Detailed Installation Instructions](https://github.com/lexical-lsp/lexical/blob/main/pages/installation.md) + + **By default, `lexical` doesn't have a `cmd` set.** + This is because nvim-lspconfig does not make assumptions about your path. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lexical.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "elixir", "eelixir", "heex", "surface" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ltex + +https://github.com/valentjn/ltex-ls + +LTeX Language Server: LSP language server for LanguageTool 🔍✔️ with support for LaTeX 🎓, Markdown 📝, and others + +To install, download the latest [release](https://github.com/valentjn/ltex-ls/releases) and ensure `ltex-ls` is on your path. + +This server accepts configuration via the `settings` key. + +```lua + settings = { + ltex = { + language = "en-GB", + }, + }, +``` + +To support org files or R sweave, users can define a custom filetype autocommand (or use a plugin which defines these filetypes): + +```lua +vim.cmd [[ autocmd BufRead,BufNewFile *.org set filetype=org ]] +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ltex.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ltex-ls" } + ``` + - `filetypes` : + ```lua + { "bib", "gitcommit", "markdown", "org", "plaintex", "rst", "rnoweb", "tex", "pandoc", "quarto", "rmd", "context", "html", "xhtml", "mail", "text" } + ``` + - `get_language_id` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + ltex = { + enabled = { "bibtex", "gitcommit", "markdown", "org", "tex", "restructuredtext", "rsweave", "latex", "quarto", "rmd", "context", "html", "xhtml", "mail", "plaintext" } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## lua_ls + +https://github.com/luals/lua-language-server + +Lua language server. + +`lua-language-server` can be installed by following the instructions [here](https://luals.github.io/#neovim-install). + +The default `cmd` assumes that the `lua-language-server` binary can be found in `$PATH`. + +If you primarily use `lua-language-server` for Neovim, and want to provide completions, +analysis, and location handling for plugins on runtime path, you can use the following +settings. + +```lua +require'lspconfig'.lua_ls.setup { + on_init = function(client) + local path = client.workspace_folders[1].name + if vim.loop.fs_stat(path..'/.luarc.json') or vim.loop.fs_stat(path..'/.luarc.jsonc') then + return + end + + client.config.settings.Lua = vim.tbl_deep_extend('force', client.config.settings.Lua, { + runtime = { + -- Tell the language server which version of Lua you're using + -- (most likely LuaJIT in the case of Neovim) + version = 'LuaJIT' + }, + -- Make the server aware of Neovim runtime files + workspace = { + checkThirdParty = false, + library = { + vim.env.VIMRUNTIME + -- Depending on the usage, you might want to add additional paths here. + -- "${3rd}/luv/library" + -- "${3rd}/busted/library", + } + -- or pull in all of 'runtimepath'. NOTE: this is a lot slower + -- library = vim.api.nvim_get_runtime_file("", true) + } + }) + end, + settings = { + Lua = {} + } +} +``` + +See `lua-language-server`'s [documentation](https://luals.github.io/wiki/settings/) for an explanation of the above fields: +* [Lua.runtime.path](https://luals.github.io/wiki/settings/#runtimepath) +* [Lua.workspace.library](https://luals.github.io/wiki/settings/#workspacelibrary) + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lua_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lua-language-server" } + ``` + - `filetypes` : + ```lua + { "lua" } + ``` + - `log_level` : + ```lua + 2 + ``` + - `root_dir` : + ```lua + root_pattern(".luarc.json", ".luarc.jsonc", ".luacheckrc", ".stylua.toml", "stylua.toml", "selene.toml", "selene.yml", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## luau_lsp + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.luau_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "luau-lsp", "lsp" } + ``` + - `filetypes` : + ```lua + { "luau" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + + +## lwc_ls + +https://github.com/forcedotcom/lightning-language-server/ + +Language server for Lightning Web Components. + +For manual installation, utilize the official [NPM package](https://www.npmjs.com/package/@salesforce/lwc-language-server). +Then, configure `cmd` to run the Node script at the unpacked location: + +```lua +require'lspconfig'.lwc_ls.setup { + cmd = { + 'node', + '/path/to/node_modules/@salesforce/lwc-language-server/bin/lwc-language-server.js', + '--stdio' + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.lwc_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "lwc-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "javascript", "html" } + ``` + - `init_options` : + ```lua + { + embeddedLanguages = { + javascript = true + } + } + ``` + - `root_dir` : + ```lua + root_pattern('sfdx-project.json') + ``` + + +## m68k + +https://github.com/grahambates/m68k-lsp + +Language server for Motorola 68000 family assembly + +`m68k-lsp-server` can be installed via `npm`: + +```sh +npm install -g m68k-lsp-server +``` + +Ensure you are using the 68k asm syntax variant in Neovim. + +```lua +vim.g.asmsyntax = 'asm68k' +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.m68k.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "m68k-lsp-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "asm68k" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## markdown_oxide + +https://github.com/Feel-ix-343/markdown-oxide + +Let's record your consciousness! Bring your own text editor! +Implemented as a language server compatible with any text +editor, Markdown-Oxide is attempting to be the best PKM +system for software enthusiasts. + +Check the readme to see how to properly setup nvim-cmp. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.markdown_oxide.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "markdown-oxide" } + ``` + - `filetypes` : + ```lua + { "markdown" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## marksman + +https://github.com/artempyanykh/marksman + +Marksman is a Markdown LSP server providing completion, cross-references, diagnostics, and more. + +Marksman works on MacOS, Linux, and Windows and is distributed as a self-contained binary for each OS. + +Pre-built binaries can be downloaded from https://github.com/artempyanykh/marksman/releases + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.marksman.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "marksman", "server" } + ``` + - `filetypes` : + ```lua + { "markdown", "markdown.mdx" } + ``` + - `root_dir` : + ```lua + root_pattern(".git", ".marksman.toml") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## matlab_ls + +https://github.com/mathworks/MATLAB-language-server + +MATLAB® language server implements the Microsoft® Language Server Protocol for the MATLAB language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.matlab_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "matlab-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "matlab" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + MATLAB = { + indexWorkspace = false, + installPath = "", + matlabConnectionTiming = "onStart", + telemetry = true + } + } + ``` + - `single_file_support` : + ```lua + false + ``` + + +## mdx_analyzer + +https://github.com/mdx-js/mdx-analyzer + +`mdx-analyzer`, a language server for MDX + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mdx_analyzer.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mdx-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "markdown.mdx" } + ``` + - `init_options` : + ```lua + { + typescript = {} + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## mesonlsp + +https://github.com/JCWasmx86/mesonlsp + +An unofficial, unendorsed language server for meson written in C++ + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mesonlsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mesonlsp", "--lsp" } + ``` + - `filetypes` : + ```lua + { "meson" } + ``` + - `root_dir` : + ```lua + util.root_pattern("meson_options.txt", "meson.options", ".git") + ``` + + +## metals + +https://scalameta.org/metals/ + +Scala language server with rich IDE features. + +See full instructions in the Metals documentation: + +https://scalameta.org/metals/docs/editors/vim#using-an-alternative-lsp-client + +Note: that if you're using [nvim-metals](https://github.com/scalameta/nvim-metals), that plugin fully handles the setup and installation of Metals, and you shouldn't set up Metals both with it and `lspconfig`. + +To install Metals, make sure to have [coursier](https://get-coursier.io/docs/cli-installation) installed, and once you do you can install the latest Metals with `cs install metals`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.metals.setup{} +``` + + +**Default values:** + - `capabilities` : + ```lua + { + workspace = { + configuration = false + } + } + ``` + - `cmd` : + ```lua + { "metals" } + ``` + - `filetypes` : + ```lua + { "scala" } + ``` + - `init_options` : + ```lua + { + compilerOptions = { + snippetAutoIndent = false + }, + isHttpEnabled = true, + statusBarProvider = "show-message" + } + ``` + - `message_level` : + ```lua + 4 + ``` + - `root_dir` : + ```lua + util.root_pattern("build.sbt", "build.sc", "build.gradle", "pom.xml") + ``` + + +## millet + +https://github.com/azdavis/millet + +Millet, a language server for Standard ML + +To use with nvim: + +1. Install a Rust toolchain: https://rustup.rs +2. Clone the repo +3. Run `cargo build --release --bin lang-srv` +4. Move `target/release/lang-srv` to somewhere on your $PATH as `millet` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.millet.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "millet" } + ``` + - `filetypes` : + ```lua + { "sml" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## mint + +https://www.mint-lang.com + +Install Mint using the [instructions](https://www.mint-lang.com/install). +The language server is included since version 0.12.0. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mint.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mint", "ls" } + ``` + - `filetypes` : + ```lua + { "mint" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## mlir_lsp_server + +https://mlir.llvm.org/docs/Tools/MLIRLSP/#mlir-lsp-language-server--mlir-lsp-server= + +The Language Server for the LLVM MLIR language + +`mlir-lsp-server` can be installed at the llvm-project repository (https://github.com/llvm/llvm-project) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mlir_lsp_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mlir-lsp-server" } + ``` + - `filetypes` : + ```lua + { "mlir" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## mlir_pdll_lsp_server + +https://mlir.llvm.org/docs/Tools/MLIRLSP/#pdll-lsp-language-server--mlir-pdll-lsp-server + +The Language Server for the LLVM PDLL language + +`mlir-pdll-lsp-server` can be installed at the llvm-project repository (https://github.com/llvm/llvm-project) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mlir_pdll_lsp_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mlir-pdll-lsp-server" } + ``` + - `filetypes` : + ```lua + { "pdll" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## mm0_ls + +https://github.com/digama0/mm0 + +Language Server for the metamath-zero theorem prover. + +Requires [mm0-rs](https://github.com/digama0/mm0/tree/master/mm0-rs) to be installed +and available on the `PATH`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mm0_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mm0-rs", "server" } + ``` + - `filetypes` : + ```lua + { "metamath-zero" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## mojo + +https://github.com/modularml/mojo + +`mojo-lsp-server` can be installed [via Modular](https://developer.modular.com/download) + +Mojo is a new programming language that bridges the gap between research and production by combining Python syntax and ecosystem with systems programming and metaprogramming features. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mojo.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mojo-lsp-server" } + ``` + - `filetypes` : + ```lua + { "mojo" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## motoko_lsp + +https://github.com/dfinity/vscode-motoko + +Language server for the Motoko programming language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.motoko_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "motoko-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "motoko" } + ``` + - `init_options` : + ```lua + { + formatter = "auto" + } + ``` + - `root_dir` : + ```lua + root_pattern("dfx.json", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## move_analyzer + +https://github.com/move-language/move/tree/main/language/move-analyzer + +Language server for Move + +The `move-analyzer` can be installed by running: + +``` +cargo install --git https://github.com/move-language/move move-analyzer +``` + +See [`move-analyzer`'s doc](https://github.com/move-language/move/blob/1b258a06e3c7d2bc9174578aac92cca3ac19de71/language/move-analyzer/editors/code/README.md#how-to-install) for details. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.move_analyzer.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "move-analyzer" } + ``` + - `filetypes` : + ```lua + { "move" } + ``` + - `root_dir` : + ```lua + root_pattern("Move.toml") + ``` + + +## mutt_ls + +https://github.com/neomutt/mutt-language-server + +A language server for (neo)mutt's muttrc. It can be installed via pip. + +```sh +pip install mutt-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.mutt_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "mutt-language-server" } + ``` + - `filetypes` : + ```lua + { "muttrc", "neomuttrc" } + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nelua_lsp + +https://github.com/codehz/nelua-lsp + +nelua-lsp is an experimental nelua language server. + +You need [nelua.vim](https://github.com/stefanos82/nelua.vim/blob/main/ftdetect/nelua.vim) for nelua files to be recognized or add this to your config: + +in vimscript: +```vimscript +au BufNewFile,BufRead *.nelua setf nelua +``` + +in lua: +```lua +vim.api.nvim_create_autocmd({ "BufNewFile", "BufRead" }, { pattern = { "*.nelua" }, command = "setf nelua"}) +``` + +**By default, nelua-lsp doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. + +```lua +require'lspconfig'.nelua_lsp.setup { + cmd = { "nelua", "-L", "/path/to/nelua-lsp/", "--script", "/path/to/nelua-lsp/nelua-lsp.lua" }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nelua_lsp.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "nelua" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## neocmake + +https://github.com/Decodetalkers/neocmakelsp + +CMake LSP Implementation + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.neocmake.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "neocmakelsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "cmake" } + ``` + - `root_dir` : + ```lua + root_pattern('.git', 'cmake') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nextls + +https://github.com/elixir-tools/next-ls + +**By default, next-ls does not set its `cmd`. Please see the following [detailed instructions](https://www.elixir-tools.dev/docs/next-ls/installation/) for possible installation methods.** + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nextls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "elixir", "eelixir", "heex", "surface" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nginx_language_server + +https://pypi.org/project/nginx-language-server/ + +`nginx-language-server` can be installed via pip: + +```sh +pip install -U nginx-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nginx_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nginx-language-server" } + ``` + - `filetypes` : + ```lua + { "nginx" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nickel_ls + +Nickel Language Server + +https://github.com/tweag/nickel + +`nls` can be installed with nix, or cargo, from the Nickel repository. +```sh +git clone https://github.com/tweag/nickel.git +``` + +Nix: +```sh +cd nickel +nix-env -f . -i +``` + +cargo: +```sh +cd nickel/lsp/nls +cargo install --path . +``` + +In order to have lspconfig detect Nickel filetypes (a prerequisite for autostarting a server), +install the [Nickel vim plugin](https://github.com/nickel-lang/vim-nickel). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nickel_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nls" } + ``` + - `filetypes` : + ```lua + { "ncl", "nickel" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## nil_ls + +https://github.com/oxalica/nil + +A new language server for Nix Expression Language. + +If you are using Nix with Flakes support, run `nix profile install github:oxalica/nil` to install. +Check the repository README for more information. + +_See an example config at https://github.com/oxalica/nil/blob/main/dev/nvim-lsp.nix._ + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nil_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nil" } + ``` + - `filetypes` : + ```lua + { "nix" } + ``` + - `root_dir` : + ```lua + root_pattern("flake.nix", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nim_langserver + +https://github.com/nim-lang/langserver + + +`nim-langserver` can be installed via the `nimble` package manager: +```sh +nimble install nimlangserver +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nim_langserver.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nimlangserver" } + ``` + - `filetypes` : + ```lua + { "nim" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nimls + +https://github.com/PMunch/nimlsp + +`nimlsp` can be installed via the `nimble` package manager: + +```sh +nimble install nimlsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nimls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nimlsp" } + ``` + - `filetypes` : + ```lua + { "nim" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nixd + +https://github.com/nix-community/nixd + +Nix language server, based on nix libraries. + +If you are using Nix with Flakes support, run `nix profile install github:nix-community/nixd` to install. +Check the repository README for more information. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nixd.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nixd" } + ``` + - `filetypes` : + ```lua + { "nix" } + ``` + - `root_dir` : + ```lua + root_pattern("flake.nix",".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nomad_lsp + +https://github.com/juliosueiras/nomad-lsp + +Written in Go, compilation is needed for `nomad_lsp` to be used. Please see the [original repository](https://github.com/juliosuieras/nomad-lsp). + +Add the executable to your system or vim PATH and it will be set to go. + +No configuration option is needed unless you choose not to add `nomad-lsp` executable to the PATH. You should know what you are doing if you choose so. + +```lua +require('lspconfig').nomad_lsp.setup{ } +``` + +However, a `hcl.nomad` or `nomad` filetype should be defined. + +Description of your jobs should be written in `.nomad` files for the LSP client to configure the server's `root_dir` configuration option. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nomad_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nomad-lsp" } + ``` + - `filetypes` : + ```lua + { "hcl.nomad", "nomad" } + ``` + - `root_dir` : + ```lua + util.root_pattern("hcl.nomad", "nomad") + ``` + + +## ntt + +https://github.com/nokia/ntt +Installation instructions can be found [here](https://github.com/nokia/ntt#Install). +Can be configured by passing a "settings" object to `ntt.setup{}`: +```lua +require('lspconfig').ntt.setup{ + settings = { + ntt = { + } + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ntt.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ntt", "langserver" } + ``` + - `filetypes` : + ```lua + { "ttcn" } + ``` + - `root_dir` : + ```lua + util.root_pattern(".git") + ``` + + +## nushell + +https://github.com/nushell/nushell + +Nushell built-in language server. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nushell.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nu", "--lsp" } + ``` + - `filetypes` : + ```lua + { "nu" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## nxls + +https://github.com/nrwl/nx-console/tree/master/apps/nxls + +nxls, a language server for Nx Workspaces + +`nxls` can be installed via `npm`: +```sh +npm i -g nxls +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.nxls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nxls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "json", "jsonc" } + ``` + - `root_dir` : + ```lua + util.root_pattern + ``` + + +## ocamlls + +https://github.com/ocaml-lsp/ocaml-language-server + +`ocaml-language-server` can be installed via `npm` +```sh +npm install -g ocaml-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ocamlls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ocaml-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "ocaml", "reason" } + ``` + - `root_dir` : + ```lua + root_pattern("*.opam", "esy.json", "package.json") + ``` + + +## ocamllsp + +https://github.com/ocaml/ocaml-lsp + +`ocaml-lsp` can be installed as described in [installation guide](https://github.com/ocaml/ocaml-lsp#installation). + +To install the lsp server in a particular opam switch: +```sh +opam install ocaml-lsp-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ocamllsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ocamllsp" } + ``` + - `filetypes` : + ```lua + { "ocaml", "menhir", "ocamlinterface", "ocamllex", "reason", "dune" } + ``` + - `get_language_id` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("*.opam", "esy.json", "package.json", ".git", "dune-project", "dune-workspace") + ``` + + +## ols + + https://github.com/DanielGavin/ols + + `Odin Language Server`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ols.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ols" } + ``` + - `filetypes` : + ```lua + { "odin" } + ``` + - `root_dir` : + ```lua + util.root_pattern("ols.json", ".git", "*.odin") + ``` + + +## omnisharp + +https://github.com/omnisharp/omnisharp-roslyn +OmniSharp server based on Roslyn workspaces + +`omnisharp-roslyn` can be installed by downloading and extracting a release from [here](https://github.com/OmniSharp/omnisharp-roslyn/releases). +OmniSharp can also be built from source by following the instructions [here](https://github.com/omnisharp/omnisharp-roslyn#downloading-omnisharp). + +OmniSharp requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. + +**By default, omnisharp-roslyn doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. + +For `go_to_definition` to work fully, extended `textDocument/definition` handler is needed, for example see [omnisharp-extended-lsp.nvim](https://github.com/Hoffs/omnisharp-extended-lsp.nvim) + +```lua +require'lspconfig'.omnisharp.setup { + cmd = { "dotnet", "/path/to/omnisharp/OmniSharp.dll" }, + + settings = { + FormattingOptions = { + -- Enables support for reading code style, naming convention and analyzer + -- settings from .editorconfig. + EnableEditorConfigSupport = true, + -- Specifies whether 'using' directives should be grouped and sorted during + -- document formatting. + OrganizeImports = nil, + }, + MsBuild = { + -- If true, MSBuild project system will only load projects for files that + -- were opened in the editor. This setting is useful for big C# codebases + -- and allows for faster initialization of code navigation features only + -- for projects that are relevant to code that is being edited. With this + -- setting enabled OmniSharp may load fewer projects and may thus display + -- incomplete reference lists for symbols. + LoadProjectsOnDemand = nil, + }, + RoslynExtensionsOptions = { + -- Enables support for roslyn analyzers, code fixes and rulesets. + EnableAnalyzersSupport = nil, + -- Enables support for showing unimported types and unimported extension + -- methods in completion lists. When committed, the appropriate using + -- directive will be added at the top of the current file. This option can + -- have a negative impact on initial completion responsiveness, + -- particularly for the first few completion sessions after opening a + -- solution. + EnableImportCompletion = nil, + -- Only run analyzers against open files when 'enableRoslynAnalyzers' is + -- true + AnalyzeOpenDocumentsOnly = nil, + }, + Sdk = { + -- Specifies whether to include preview versions of the .NET SDK when + -- determining which version to use for project loading. + IncludePrereleases = true, + }, + }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.omnisharp.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "cs", "vb" } + ``` + - `init_options` : + ```lua + {} + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("*.sln", "*.csproj", "omnisharp.json", "function.json") + ``` + - `settings` : + ```lua + { + FormattingOptions = { + EnableEditorConfigSupport = true + }, + MsBuild = {}, + RoslynExtensionsOptions = {}, + Sdk = { + IncludePrereleases = true + } + } + ``` + + +## opencl_ls + +https://github.com/Galarius/opencl-language-server + +Build instructions can be found [here](https://github.com/Galarius/opencl-language-server/blob/main/_dev/build.md). + +Prebuilt binaries are available for Linux, macOS and Windows [here](https://github.com/Galarius/opencl-language-server/releases). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.opencl_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "opencl-language-server" } + ``` + - `filetypes` : + ```lua + { "opencl" } + ``` + - `root_dir` : + ```lua + util.root_pattern(".git") + ``` + + +## openedge_ls + +[Language server](https://github.com/vscode-abl/vscode-abl) for Progress OpenEdge ABL. + +For manual installation, download abl-lsp.jar from the [VSCode +extension](https://github.com/vscode-abl/vscode-abl/releases/latest). + +Configuration + +```lua +require('lspconfig').['openedge_ls'].setup { + oe_jar_path = '/path/to/abl-lsp.jar', + dlc = '12.2:/path/to/dlc-12.2', -- Version number and OpenEdge root directory (colon separator) + debug = false, -- Set to true for debug logging + trace = false -- Set to true for trace logging (REALLY verbose) +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.openedge_ls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "progress" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern('openedge-project.json') + ``` + + +## openscad_ls + +https://github.com/dzhu/openscad-language-server + +A Language Server Protocol server for OpenSCAD + +You can build and install `openscad-language-server` binary with `cargo`: +```sh +cargo install openscad-language-server +``` + +Vim does not have built-in syntax for the `openscad` filetype currently. + +This can be added via an autocmd: + +```lua +vim.cmd [[ autocmd BufRead,BufNewFile *.scad set filetype=openscad ]] +``` + +or by installing a filetype plugin such as https://github.com/sirtaj/vim-openscad + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.openscad_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "openscad-language-server" } + ``` + - `filetypes` : + ```lua + { "openscad" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## openscad_lsp + +https://github.com/Leathong/openscad-LSP + +A Language Server Protocol server for OpenSCAD + +You can build and install `openscad-lsp` binary with `cargo`: +```sh +cargo install openscad-lsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.openscad_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "openscad-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "openscad" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pact_ls + +https://github.com/kadena-io/pact-lsp + +The Pact language server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pact_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pact-lsp" } + ``` + - `filetypes` : + ```lua + { "pact" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pasls + +https://github.com/genericptr/pascal-language-server + +An LSP server implementation for Pascal variants that are supported by Free Pascal, including Object Pascal. It uses CodeTools from Lazarus as backend. + +First set `cmd` to the Pascal lsp binary. + +Customization options are passed to pasls as environment variables for example in your `.bashrc`: +```bash +export FPCDIR='/usr/lib/fpc/src' # FPC source directory (This is the only required option for the server to work). +export PP='/usr/lib/fpc/3.2.2/ppcx64' # Path to the Free Pascal compiler executable. +export LAZARUSDIR='/usr/lib/lazarus' # Path to the Lazarus sources. +export FPCTARGET='' # Target operating system for cross compiling. +export FPCTARGETCPU='x86_64' # Target CPU for cross compiling. +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pasls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pasls" } + ``` + - `filetypes` : + ```lua + { "pascal" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pbls + +https://git.sr.ht/~rrc/pbls + +Prerequisites: Ensure protoc is on your $PATH. + +`pbls` can be installed via `cargo install`: +```sh +cargo install --git https://git.sr.ht/~rrc/pbls +``` + +pbls is a Language Server for protobuf + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pbls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pbls" } + ``` + - `filetypes` : + ```lua + { "proto" } + ``` + - `root_dir` : + ```lua + root_pattern(".pbls.toml", ".git") + ``` + + +## perlls + +https://github.com/richterger/Perl-LanguageServer/tree/master/clients/vscode/perl + +`Perl-LanguageServer`, a language server for Perl. + +To use the language server, ensure that you have Perl::LanguageServer installed and perl command is on your path. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.perlls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "perl", "-MPerl::LanguageServer", "-e", "Perl::LanguageServer::run", "--", "--port 13603", "--nostdio 0" } + ``` + - `filetypes` : + ```lua + { "perl" } + ``` + - `root_dir` : + ```lua + vim's starting directory + ``` + - `settings` : + ```lua + { + perl = { + fileFilter = { ".pm", ".pl" }, + ignoreDirs = ".git", + perlCmd = "perl", + perlInc = " " + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## perlnavigator + +https://github.com/bscan/PerlNavigator + +A Perl language server. It can be installed via npm: + +```sh +npm i -g perlnavigator-server +``` + +At minimum, you will need `perl` in your path. If you want to use a non-standard `perl` you will need to set your configuration like so: +```lua +settings = { + perlnavigator = { + perlPath = '/some/odd/location/my-perl' + } +} +``` + +The `contributes.configuration.properties` section of `perlnavigator`'s `package.json` has all available configuration settings. All +settings have a reasonable default, but, at minimum, you may want to point `perlnavigator` at your `perltidy` and `perlcritic` configurations. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.perlnavigator.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "perlnavigator" } + ``` + - `filetypes` : + ```lua + { "perl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## perlpls + +https://github.com/FractalBoy/perl-language-server +https://metacpan.org/pod/PLS + +`PLS`, another language server for Perl. + +To use the language server, ensure that you have PLS installed and that it is in your path + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.perlpls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pls" } + ``` + - `filetypes` : + ```lua + { "perl" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `settings` : + ```lua + { + perl = { + perlcritic = { + enabled = false + }, + syntax = { + enabled = true + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pest_ls + +https://github.com/pest-parser/pest-ide-tools + +Language server for pest grammars. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pest_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pest-language-server" } + ``` + - `filetypes` : + ```lua + { "pest" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## phan + +https://github.com/phan/phan + +Installation: https://github.com/phan/phan#getting-started + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.phan.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "phan", "-m", "json", "--no-color", "--no-progress-bar", "-x", "-u", "-S", "--language-server-on-stdin", "--allow-polyfill-parser" } + ``` + - `filetypes` : + ```lua + { "php" } + ``` + - `root_dir` : + ```lua + root_pattern("composer.json", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## phpactor + +https://github.com/phpactor/phpactor + +Installation: https://phpactor.readthedocs.io/en/master/usage/standalone.html#global-installation + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.phpactor.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "phpactor", "language-server" } + ``` + - `filetypes` : + ```lua + { "php" } + ``` + - `root_dir` : + ```lua + root_pattern("composer.json", ".git") + ``` + + +## pico8_ls + +https://github.com/japhib/pico8-ls + +Full language support for the PICO-8 dialect of Lua. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pico8_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pico8-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "p8" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## pkgbuild_language_server + +https://github.com/Freed-Wu/pkgbuild-language-server + +Language server for ArchLinux/Windows Msys2's PKGBUILD. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pkgbuild_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pkgbuild-language-server" } + ``` + - `filetypes` : + ```lua + { "PKGBUILD" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## please + +https://github.com/thought-machine/please + +High-performance extensible build system for reproducible multi-language builds. + +The `plz` binary will automatically install the LSP for you on first run + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.please.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "plz", "tool", "lps" } + ``` + - `filetypes` : + ```lua + { "bzl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## postgres_lsp + +https://github.com/supabase/postgres_lsp + +A Language Server for Postgres + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.postgres_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "postgres_lsp" } + ``` + - `filetypes` : + ```lua + { "sql" } + ``` + - `root_dir` : + ```lua + util.root_pattern 'root-file.txt' + ``` + - `single_file_support` : + ```lua + true + ``` + + +## powershell_es + +https://github.com/PowerShell/PowerShellEditorServices + +Language server for PowerShell. + +To install, download and extract PowerShellEditorServices.zip +from the [releases](https://github.com/PowerShell/PowerShellEditorServices/releases). +To configure the language server, set the property `bundle_path` to the root +of the extracted PowerShellEditorServices.zip. + +The default configuration doesn't set `cmd` unless `bundle_path` is specified. + +```lua +require'lspconfig'.powershell_es.setup{ + bundle_path = 'c:/w/PowerShellEditorServices', +} +``` + +By default the languageserver is started in `pwsh` (PowerShell Core). This can be changed by specifying `shell`. + +```lua +require'lspconfig'.powershell_es.setup{ + bundle_path = 'c:/w/PowerShellEditorServices', + shell = 'powershell.exe', +} +``` + +Note that the execution policy needs to be set to `Unrestricted` for the languageserver run under PowerShell + +If necessary, specific `cmd` can be defined instead of `bundle_path`. +See [PowerShellEditorServices](https://github.com/PowerShell/PowerShellEditorServices#stdio) +to learn more. + +```lua +require'lspconfig'.powershell_es.setup{ + cmd = {'pwsh', '-NoLogo', '-NoProfile', '-Command', "c:/PSES/Start-EditorServices.ps1 ..."} +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.powershell_es.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "ps1" } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + git root or current directory + ``` + - `shell` : + ```lua + "pwsh" + ``` + - `single_file_support` : + ```lua + true + ``` + + +## prismals + +Language Server for the Prisma JavaScript and TypeScript ORM + +`@prisma/language-server` can be installed via npm +```sh +npm install -g @prisma/language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.prismals.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "prisma-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "prisma" } + ``` + - `root_dir` : + ```lua + root_pattern(".git", "package.json") + ``` + - `settings` : + ```lua + { + prisma = { + prismaFmtBinPath = "" + } + } + ``` + + +## prolog_ls + + https://github.com/jamesnvc/lsp_server + + Language Server Protocol server for SWI-Prolog + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.prolog_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "swipl", "-g", "use_module(library(lsp_server)).", "-g", "lsp_server:main", "-t", "halt", "--", "stdio" } + ``` + - `filetypes` : + ```lua + { "prolog" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## prosemd_lsp + +https://github.com/kitten/prosemd-lsp + +An experimental LSP for Markdown. + +Please see the manual installation instructions: https://github.com/kitten/prosemd-lsp#manual-installation + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.prosemd_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "prosemd-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "markdown" } + ``` + - `root_dir` : + ```lua + <function 1> + ``` + - `single_file_support` : + ```lua + true + ``` + + +## psalm + +https://github.com/vimeo/psalm + +Can be installed with composer. +```sh +composer global require vimeo/psalm +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.psalm.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "psalm", "--language-server" } + ``` + - `filetypes` : + ```lua + { "php" } + ``` + - `root_dir` : + ```lua + root_pattern("psalm.xml", "psalm.xml.dist") + ``` + + +## puppet + +LSP server for Puppet. + +Installation: + +- Clone the editor-services repository: + https://github.com/puppetlabs/puppet-editor-services + +- Navigate into that directory and run: `bundle install` + +- Install the 'puppet-lint' gem: `gem install puppet-lint` + +- Add that repository to $PATH. + +- Ensure you can run `puppet-languageserver` from outside the editor-services directory. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.puppet.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "puppet-languageserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "puppet" } + ``` + - `root_dir` : + ```lua + root_pattern("manifests", ".puppet-lint.rc", "hiera.yaml", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## purescriptls + +https://github.com/nwolverson/purescript-language-server + +The `purescript-language-server` can be added to your project and `$PATH` via + +* JavaScript package manager such as npm, pnpm, Yarn, et al. +* Nix under the `nodePackages` and `nodePackages_latest` package sets + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.purescriptls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "purescript-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "purescript" } + ``` + - `root_dir` : + ```lua + root_pattern('bower.json', 'flake.nix', 'psc-package.json', 'shell.nix', 'spago.dhall', 'spago.yaml'), + ``` + + +## pylsp + +https://github.com/python-lsp/python-lsp-server + +A Python 3.6+ implementation of the Language Server Protocol. + +See the [project's README](https://github.com/python-lsp/python-lsp-server) for installation instructions. + +Configuration options are documented [here](https://github.com/python-lsp/python-lsp-server/blob/develop/CONFIGURATION.md). +In order to configure an option, it must be translated to a nested Lua table and included in the `settings` argument to the `setup{}` function. +For example, in order to set the `pylsp.plugins.pycodestyle.ignore` option: +```lua +require'lspconfig'.pylsp.setup{ + settings = { + pylsp = { + plugins = { + pycodestyle = { + ignore = {'W391'}, + maxLineLength = 100 + } + } + } + } +} +``` + +Note: This is a community fork of `pyls`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pylsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pylsp" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pylyzer + + https://github.com/mtshiba/pylyzer + + `pylyzer`, a fast static code analyzer & language server for Python. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pylyzer.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pylyzer", "--server" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + python = { + checkOnType = false, + diagnostics = true, + inlayHints = true, + smartCompletion = true + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## pyre + +https://pyre-check.org/ + +`pyre` a static type checker for Python 3. + +`pyre` offers an extremely limited featureset. It currently only supports diagnostics, +which are triggered on save. + +Do not report issues for missing features in `pyre` to `lspconfig`. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pyre.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "pyre", "persistent" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## pyright + +https://github.com/microsoft/pyright + +`pyright`, a static type checker and language server for python + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.pyright.setup{} +``` +**Commands:** +- PyrightOrganizeImports: Organize Imports +- PyrightSetPythonPath: Reconfigure pyright with the provided python path + +**Default values:** + - `cmd` : + ```lua + { "pyright-langserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + python = { + analysis = { + autoSearchPaths = true, + diagnosticMode = "openFilesOnly", + useLibraryCodeForTypes = true + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## qml_lsp + +https://invent.kde.org/sdk/qml-lsp + +LSP implementation for QML (autocompletion, live linting, etc. in editors) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.qml_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "qml-lsp" } + ``` + - `filetypes` : + ```lua + { "qmljs" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## qmlls + +https://github.com/qt/qtdeclarative + +LSP implementation for QML (autocompletion, live linting, etc. in editors), + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.qmlls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "qmlls" } + ``` + - `filetypes` : + ```lua + { "qml", "qmljs" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## quick_lint_js + +https://quick-lint-js.com/ + +quick-lint-js finds bugs in JavaScript programs. + +See installation [instructions](https://quick-lint-js.com/install/) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.quick_lint_js.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "quick-lint-js", "--lsp-server" } + ``` + - `filetypes` : + ```lua + { "javascript", "typescript" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## r_language_server + +[languageserver](https://github.com/REditorSupport/languageserver) is an +implementation of the Microsoft's Language Server Protocol for the R +language. + +It is released on CRAN and can be easily installed by + +```r +install.packages("languageserver") +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.r_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "R", "--slave", "-e", "languageserver::run()" } + ``` + - `filetypes` : + ```lua + { "r", "rmd" } + ``` + - `log_level` : + ```lua + 2 + ``` + - `root_dir` : + ```lua + root_pattern(".git") or os_homedir + ``` + + +## racket_langserver + +[https://github.com/jeapostrophe/racket-langserver](https://github.com/jeapostrophe/racket-langserver) + +The Racket language server. This project seeks to use +[DrRacket](https://github.com/racket/drracket)'s public API to provide +functionality that mimics DrRacket's code tools as closely as possible. + +Install via `raco`: `raco pkg install racket-langserver` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.racket_langserver.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "racket", "--lib", "racket-langserver" } + ``` + - `filetypes` : + ```lua + { "racket", "scheme" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## raku_navigator + +https://github.com/bscan/RakuNavigator +A Raku language server +**By default, raku_navigator doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. +You have to install the language server manually. +Clone the RakuNavigator repo, install based on the [instructions](https://github.com/bscan/raku_Navigator#installation-for-other-editors), +and point `cmd` to `server.js` inside the `server/out` directory: +```lua +cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'} +``` +At minimum, you will need `raku` in your path. If you want to use a non-standard `raku` you will need to set your configuration like so: +```lua +settings = { + raku_navigator = { + rakuPath = '/some/odd/location/my-raku' + } +} +``` +The `contributes.configuration.properties` section of `raku_navigator`'s `package.json` has all available configuration settings. All +settings have a reasonable default, but, at minimum, you may want to point `raku_navigator` at your `raku_tidy` and `raku_critic` configurations. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.raku_navigator.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + {} + ``` + - `filetypes` : + ```lua + { "raku" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## reason_ls + +Reason language server + +You can install reason language server from [reason-language-server](https://github.com/jaredly/reason-language-server) repository. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.reason_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "reason-language-server" } + ``` + - `filetypes` : + ```lua + { "reason" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## regal + +https://github.com/StyraInc/regal + +A linter for Rego, with support for running as an LSP server. + +`regal` can be installed by running: +```sh +go install github.com/StyraInc/regal@latest +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.regal.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "regal", "language-server" } + ``` + - `filetypes` : + ```lua + { "rego" } + ``` + - `root_dir` : + ```lua + root_pattern("*.rego", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## regols + +https://github.com/kitagry/regols + +OPA Rego language server. + +`regols` can be installed by running: +```sh +go install github.com/kitagry/regols@latest +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.regols.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "regols" } + ``` + - `filetypes` : + ```lua + { "rego" } + ``` + - `root_dir` : + ```lua + root_pattern("*.rego", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## relay_lsp + + https://github.com/facebook/relay + `Relay` is a JavaScript framework for building data-driven React applications + + Setup: + + - Make sure you have a Relay config file somewhere in your project. + - We support standard config file formats (`.yml`, `.js`, `.json`), and the the `relay` field in your `package.json` + - Make sure you have the `relay-compiler` installed in your project. The bare minimum is v13. + - Make sure you are able to run the `relay-compiler` command from the command line. If `yarn relay-compiler` works, it's very likely that the LSP will work. + - Remove / disable any conflicting GraphQL LSPs you have installed. + + Relay LSP is a part of the Relay Compiler binary and available when adding `relay-compiler` to your project's devDependencies. + + ```lua + require'lspconfig'.relay_lsp.setup { + -- (default: false) Whether or not we should automatically start + -- the Relay Compiler in watch mode when you open a project + auto_start_compiler = false, + + + -- (default: null) Path to a relay config relative to the + -- `root_dir`. Without this, the compiler will search for your + -- config. This is helpful if your relay project is in a nested + -- directory. + path_to_config = nil, + } + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.relay_lsp.setup{} +``` + + +**Default values:** + - `auto_start_compiler` : + ```lua + false + ``` + - `cmd` : + ```lua + { "relay-compiler", "lsp" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } + ``` + - `handlers` : + ```lua + { + ["window/showStatus"] = <function 1> + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern("relay.config.*", "package.json") + ``` + + +## remark_ls + +https://github.com/remarkjs/remark-language-server + +`remark-language-server` can be installed via `npm`: +```sh +npm install -g remark-language-server +``` + +`remark-language-server` uses the same +[configuration files](https://github.com/remarkjs/remark/tree/main/packages/remark-cli#example-config-files-json-yaml-js) +as `remark-cli`. + +This uses a plugin based system. Each plugin needs to be installed locally using `npm` or `yarn`. + +For example, given the following `.remarkrc.json`: + +```json +{ + "presets": [ + "remark-preset-lint-recommended" + ] +} +``` + +`remark-preset-lint-recommended` needs to be installed in the local project: + +```sh +npm install remark-preset-lint-recommended +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.remark_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "remark-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "markdown" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## rescriptls + +https://github.com/rescript-lang/rescript-vscode/tree/master/server + +ReScript Language Server can be installed via npm: +```sh +npm install -g @rescript/language-server +``` + +See the init_options supported (see https://github.com/rescript-lang/rescript-vscode/tree/master/server/config.md): + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rescriptls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rescript-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "rescript" } + ``` + - `init_options` : + ```lua + { + extensionConfiguration = { + askToStartBuild = false + } + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## rls + +https://github.com/rust-lang/rls + +rls, a language server for Rust + +See https://github.com/rust-lang/rls#setup to setup rls itself. +See https://github.com/rust-lang/rls#configuration for rls-specific settings. +All settings listed on the rls configuration section of the readme +must be set under settings.rust as follows: + +```lua +nvim_lsp.rls.setup { + settings = { + rust = { + unstable_features = true, + build_on_save = false, + all_features = true, + }, + }, +} +``` + +If you want to use rls for a particular build, eg nightly, set cmd as follows: + +```lua +cmd = {"rustup", "run", "nightly", "rls"} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rls" } + ``` + - `filetypes` : + ```lua + { "rust" } + ``` + - `root_dir` : + ```lua + root_pattern("Cargo.toml") + ``` + + +## rnix + +https://github.com/nix-community/rnix-lsp + +A language server for Nix providing basic completion and formatting via nixpkgs-fmt. + +To install manually, run `cargo install rnix-lsp`. If you are using nix, rnix-lsp is in nixpkgs. + +This server accepts configuration via the `settings` key. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rnix.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rnix-lsp" } + ``` + - `filetypes` : + ```lua + { "nix" } + ``` + - `init_options` : + ```lua + {} + ``` + - `root_dir` : + ```lua + vim's starting directory + ``` + - `settings` : + ```lua + {} + ``` + + +## robotframework_ls + +https://github.com/robocorp/robotframework-lsp + +Language Server Protocol implementation for Robot Framework. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.robotframework_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "robotframework_ls" } + ``` + - `filetypes` : + ```lua + { "robot" } + ``` + - `root_dir` : + ```lua + util.root_pattern('robotidy.toml', 'pyproject.toml', 'conda.yaml', 'robot.yaml')(fname) + or util.find_git_ancestor(fname) + ``` + + +## roc_ls + +https://github.com/roc-lang/roc/tree/main/crates/language_server#roc_language_server + +The built-in language server for the Roc programming language. +[Installation](https://github.com/roc-lang/roc/tree/main/crates/language_server#installing) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.roc_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "roc_language_server" } + ``` + - `filetypes` : + ```lua + { "roc" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## rome + +https://rome.tools + +Language server for the Rome Frontend Toolchain. + +(Unmaintained, use [Biome](https://biomejs.dev/blog/annoucing-biome) instead.) + +```sh +npm install [-g] rome +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rome.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rome", "lsp-proxy" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "json", "typescript", "typescript.tsx", "typescriptreact" } + ``` + - `root_dir` : + ```lua + root_pattern('package.json', 'node_modules', '.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## rubocop + +https://github.com/rubocop/rubocop + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rubocop.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rubocop", "--lsp" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + + +## ruby_lsp + +https://shopify.github.io/ruby-lsp/ + +This gem is an implementation of the language server protocol specification for +Ruby, used to improve editor features. + +Install the gem. There's no need to require it, since the server is used as a +standalone executable. + +```sh +group :development do + gem "ruby-lsp", require: false +end +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ruby_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ruby-lsp" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `init_options` : + ```lua + { + formatter = "auto" + } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ruff + +https://github.com/astral-sh/ruff + +A Language Server Protocol implementation for Ruff, an extremely fast Python linter and code formatter, written in Rust. It can be installed via pip. + +```sh +pip install ruff +``` + +_Requires Ruff v0.3.3 or later._ + +This is the new Rust-based version of the original `ruff-lsp` implementation. It's currently in alpha, meaning that some features are under development. Currently, the following capabilities are supported: + +1. Diagnostics +2. Code actions +3. Formatting +4. Range Formatting + +Please note that the `ruff-lsp` server will continue to be maintained until further notice. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ruff.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ruff", "server", "--preview" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ruff_lsp + +https://github.com/astral-sh/ruff-lsp + +A Language Server Protocol implementation for Ruff, an extremely fast Python linter and code transformation tool, written in Rust. It can be installed via pip. + +```sh +pip install ruff-lsp +``` + +Extra CLI arguments for `ruff` can be provided via + +```lua +require'lspconfig'.ruff_lsp.setup{ + init_options = { + settings = { + -- Any extra CLI arguments for `ruff` go here. + args = {}, + } + } +} +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ruff_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ruff-lsp" } + ``` + - `filetypes` : + ```lua + { "python" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## rune_languageserver + +https://crates.io/crates/rune-languageserver + +A language server for the [Rune](https://rune-rs.github.io/) Language, +an embeddable dynamic programming language for Rust + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rune_languageserver.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "rune-languageserver" } + ``` + - `filetypes` : + ```lua + { "rune" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## rust_analyzer + +https://github.com/rust-lang/rust-analyzer + +rust-analyzer (aka rls 2.0), a language server for Rust + + +See [docs](https://github.com/rust-lang/rust-analyzer/blob/master/docs/user/generated_config.adoc) for extra settings. The settings can be used like this: +```lua +require'lspconfig'.rust_analyzer.setup{ + settings = { + ['rust-analyzer'] = { + diagnostics = { + enable = false; + } + } + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.rust_analyzer.setup{} +``` +**Commands:** +- CargoReload: Reload current cargo workspace + +**Default values:** + - `capabilities` : + ```lua + { + experimental = { + serverStatusNotification = true + }, + general = { + positionEncodings = { "utf-16" } + }, + textDocument = { + callHierarchy = { + dynamicRegistration = false + }, + codeAction = { + codeActionLiteralSupport = { + codeActionKind = { + valueSet = { "", "quickfix", "refactor", "refactor.extract", "refactor.inline", "refactor.rewrite", "source", "source.organizeImports" } + } + }, + dataSupport = true, + dynamicRegistration = true, + isPreferredSupport = true, + resolveSupport = { + properties = { "edit" } + } + }, + completion = { + completionItem = { + commitCharactersSupport = false, + deprecatedSupport = false, + documentationFormat = { "markdown", "plaintext" }, + preselectSupport = false, + snippetSupport = false + }, + completionItemKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 } + }, + completionList = { + itemDefaults = { "editRange", "insertTextFormat", "insertTextMode", "data" } + }, + contextSupport = false, + dynamicRegistration = false + }, + declaration = { + linkSupport = true + }, + definition = { + dynamicRegistration = true, + linkSupport = true + }, + diagnostic = { + dynamicRegistration = false + }, + documentHighlight = { + dynamicRegistration = false + }, + documentSymbol = { + dynamicRegistration = false, + hierarchicalDocumentSymbolSupport = true, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + formatting = { + dynamicRegistration = true + }, + hover = { + contentFormat = { "markdown", "plaintext" }, + dynamicRegistration = true + }, + implementation = { + linkSupport = true + }, + inlayHint = { + dynamicRegistration = true, + resolveSupport = { + properties = { "textEdits", "tooltip", "location", "command" } + } + }, + publishDiagnostics = { + dataSupport = true, + relatedInformation = true, + tagSupport = { + valueSet = { 1, 2 } + } + }, + rangeFormatting = { + dynamicRegistration = true + }, + references = { + dynamicRegistration = false + }, + rename = { + dynamicRegistration = true, + prepareSupport = true + }, + semanticTokens = { + augmentsSyntaxTokens = true, + dynamicRegistration = false, + formats = { "relative" }, + multilineTokenSupport = false, + overlappingTokenSupport = true, + requests = { + full = { + delta = true + }, + range = false + }, + serverCancelSupport = false, + tokenModifiers = { "declaration", "definition", "readonly", "static", "deprecated", "abstract", "async", "modification", "documentation", "defaultLibrary" }, + tokenTypes = { "namespace", "type", "class", "enum", "interface", "struct", "typeParameter", "parameter", "variable", "property", "enumMember", "event", "function", "method", "macro", "keyword", "modifier", "comment", "string", "number", "regexp", "operator", "decorator" } + }, + signatureHelp = { + dynamicRegistration = false, + signatureInformation = { + activeParameterSupport = true, + documentationFormat = { "markdown", "plaintext" }, + parameterInformation = { + labelOffsetSupport = true + } + } + }, + synchronization = { + didSave = true, + dynamicRegistration = false, + willSave = true, + willSaveWaitUntil = true + }, + typeDefinition = { + linkSupport = true + } + }, + window = { + showDocument = { + support = true + }, + showMessage = { + messageActionItem = { + additionalPropertiesSupport = false + } + }, + workDoneProgress = true + }, + workspace = { + applyEdit = true, + configuration = true, + didChangeConfiguration = { + dynamicRegistration = false + }, + didChangeWatchedFiles = { + dynamicRegistration = false, + relativePatternSupport = true + }, + inlayHint = { + refreshSupport = true + }, + semanticTokens = { + refreshSupport = true + }, + symbol = { + dynamicRegistration = false, + symbolKind = { + valueSet = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 } + } + }, + workspaceEdit = { + resourceOperations = { "rename", "create", "delete" } + }, + workspaceFolders = true + } + } + ``` + - `cmd` : + ```lua + { "rust-analyzer" } + ``` + - `filetypes` : + ```lua + { "rust" } + ``` + - `root_dir` : + ```lua + root_pattern("Cargo.toml", "rust-project.json") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## salt_ls + +Language server for Salt configuration files. +https://github.com/dcermak/salt-lsp + +The language server can be installed with `pip`: +```sh +pip install salt-lsp +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.salt_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "salt_lsp_server" } + ``` + - `filetypes` : + ```lua + { "sls" } + ``` + - `root_dir` : + ```lua + root_pattern('.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## scheme_langserver + +https://github.com/ufo5260987423/scheme-langserver +`scheme-langserver`, a language server protocol implementation for scheme. +And for nvim user, please add .sls to scheme file extension list. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.scheme_langserver.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "scheme-langserver" } + ``` + - `filetypes` : + ```lua + { "scheme" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## scry + +https://github.com/crystal-lang-tools/scry + +Crystal language server. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.scry.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "scry" } + ``` + - `filetypes` : + ```lua + { "crystal" } + ``` + - `root_dir` : + ```lua + root_pattern('shard.yml', '.git') + ``` + - `single_file_support` : + ```lua + true + ``` + + +## serve_d + + https://github.com/Pure-D/serve-d + + `Microsoft language server protocol implementation for D using workspace-d.` + Download a binary from https://github.com/Pure-D/serve-d/releases and put it in your $PATH. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.serve_d.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "serve-d" } + ``` + - `filetypes` : + ```lua + { "d" } + ``` + - `root_dir` : + ```lua + util.root_pattern("dub.json", "dub.sdl", ".git") + ``` + + +## shopify_theme_ls + +https://shopify.dev/docs/api/shopify-cli + +[Language Server](https://shopify.dev/docs/themes/tools/cli/language-server) and Theme Check (linter) for Shopify themes. + +`shopify` can be installed via npm `npm install -g @shopify/cli`. + +```lua +require lspconfig.shopify_theme_ls.setup {} +``` + +Note: This LSP already includes Theme Check so you don't need to use the `theme_check` server configuration as well. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.shopify_theme_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "shopify", "theme", "language-server" } + ``` + - `filetypes` : + ```lua + { "liquid" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## sixtyfps + +https://github.com/sixtyfpsui/sixtyfps +`SixtyFPS`'s language server + +You can build and install `sixtyfps-lsp` binary with `cargo`: +```sh +cargo install sixtyfps-lsp +``` + +Vim does not have built-in syntax for the `sixtyfps` filetype currently. + +This can be added via an autocmd: + +```lua +vim.cmd [[ autocmd BufRead,BufNewFile *.60 set filetype=sixtyfps ]] +``` + +or by installing a filetype plugin such as https://github.com/RustemB/sixtyfps-vim + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sixtyfps.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "sixtyfps-lsp" } + ``` + - `filetypes` : + ```lua + { "sixtyfps" } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## slangd + +https://github.com/shader-slang/slang + +The `slangd` binary can be downloaded as part of [slang releases](https://github.com/shader-slang/slang/releases) or +by [building `slang` from source](https://github.com/shader-slang/slang/blob/master/docs/building.md). + +The server can be configured by passing a "settings" object to `slangd.setup{}`: + +```lua +require('lspconfig').slangd.setup{ + settings = { + slang = { + predefinedMacros = {"MY_VALUE_MACRO=1"}, + inlayHints = { + deducedTypes = true, + parameterNames = true, + } + } + } +} +``` +Available options are documented [here](https://github.com/shader-slang/slang-vscode-extension/tree/main?tab=readme-ov-file#configurations) +or in more detail [here](https://github.com/shader-slang/slang-vscode-extension/blob/main/package.json#L70). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.slangd.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "slangd" } + ``` + - `filetypes` : + ```lua + { "hlsl", "shaderslang" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## slint_lsp + +https://github.com/slint-ui/slint +`Slint`'s language server + +You can build and install `slint-lsp` binary with `cargo`: +```sh +cargo install slint-lsp +``` + +Vim does not have built-in syntax for the `slint` filetype at this time. + +This can be added via an autocmd: + +```lua +vim.cmd [[ autocmd BufRead,BufNewFile *.slint set filetype=slint ]] +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.slint_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "slint-lsp" } + ``` + - `filetypes` : + ```lua + { "slint" } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## smarty_ls + +https://github.com/landeaux/vscode-smarty-langserver-extracted + +Language server for Smarty. + +`smarty-language-server` can be installed via `npm`: + +```sh +npm i -g vscode-smarty-langserver-extracted +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.smarty_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "smarty-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "smarty" } + ``` + - `init_options` : + ```lua + {} + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + css = { + validate = true + }, + smarty = { + pluginDirs = {} + } + } + ``` + + +## smithy_ls + +https://github.com/awslabs/smithy-language-server + +`Smithy Language Server`, A Language Server Protocol implementation for the Smithy IDL + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.smithy_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "smithy-language-server", "0" } + ``` + - `filetypes` : + ```lua + { "smithy" } + ``` + - `root_dir` : + ```lua + root_pattern("smithy-build.json", "build.gradle", "build.gradle.kts", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## snyk_ls + +https://github.com/snyk/snyk-ls + +LSP for Snyk Open Source, Snyk Infrastructure as Code, and Snyk Code. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.snyk_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "snyk-ls" } + ``` + - `filetypes` : + ```lua + { "go", "gomod", "javascript", "typescript", "json", "python", "requirements", "helm", "yaml", "terraform", "terraform-vars" } + ``` + - `init_options` : + ```lua + Configuration from https://github.com/snyk/snyk-ls#configuration-1 + ``` + - `root_dir` : + ```lua + root_pattern(".git", ".snyk") + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## solang + +A language server for Solidity + +See the [documentation](https://solang.readthedocs.io/en/latest/installing.html) for installation instructions. + +The language server only provides the following capabilities: +* Syntax highlighting +* Diagnostics +* Hover + +There is currently no support for completion, goto definition, references, or other functionality. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solang.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "solang", "language-server", "--target", "evm" } + ``` + - `filetypes` : + ```lua + { "solidity" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## solargraph + +https://solargraph.org/ + +solargraph, a language server for Ruby + +You can install solargraph via gem install. + +```sh +gem install --user-install solargraph +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solargraph.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "solargraph", "stdio" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `init_options` : + ```lua + { + formatting = true + } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + - `settings` : + ```lua + { + solargraph = { + diagnostics = true + } + } + ``` + + +## solc + +https://docs.soliditylang.org/en/latest/installing-solidity.html + +solc is the native language server for the Solidity language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solc.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "solc", "--lsp" } + ``` + - `filetypes` : + ```lua + { "solidity" } + ``` + - `root_dir` : + ```lua + root_pattern('hardhat.config.*', '.git') + ``` + + +## solidity + +https://github.com/qiuxiang/solidity-ls + +npm i solidity-ls -g + +Make sure that solc is installed and it's the same version of the file. solc-select is recommended. + +Solidity language server is a LSP with autocomplete, go to definition and diagnostics. + +If you use brownie, use this root_dir: +root_dir = util.root_pattern('brownie-config.yaml', '.git') + +on includePath, you can add an extra path to search for external libs, on remapping you can remap lib <> path, like: + +```lua +{ solidity = { includePath = '/Users/your_user/.brownie/packages/', remapping = { ["@OpenZeppelin/"] = 'OpenZeppelin/openzeppelin-contracts@4.6.0/' } } } +``` + +**For brownie users** +Change the root_dir to: + +```lua +root_pattern("brownie-config.yaml", ".git") +``` + +The best way of using it is to have a package.json in your project folder with the packages that you will use. +After installing with package.json, just create a `remappings.txt` with: + +``` +@OpenZeppelin/=node_modules/OpenZeppelin/openzeppelin-contracts@4.6.0/ +``` + +You can omit the node_modules as well. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solidity.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "solidity-ls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "solidity" } + ``` + - `root_dir` : + ```lua + root_pattern("package.json", ".git") + ``` + - `settings` : + ```lua + { + solidity = { + includePath = "", + remapping = {} + } + } + ``` + + +## solidity_ls + +https://github.com/juanfranblanco/vscode-solidity + +`vscode-solidity-server` can be installed via `npm`: + +```sh +npm install -g vscode-solidity-server +``` + +`vscode-solidity-server` is a language server for the Solidity language ported from the VSCode "solidity" extension. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solidity_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vscode-solidity-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "solidity" } + ``` + - `root_dir` : + ```lua + root_pattern("hardhat.config.js", "hardhat.config.ts", "foundry.toml", "remappings.txt", "truffle.js", "truffle-config.js", "ape-config.yaml", ".git", "package.json") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## solidity_ls_nomicfoundation + +https://github.com/NomicFoundation/hardhat-vscode/blob/development/server/README.md + +`nomicfoundation-solidity-language-server` can be installed via `npm`: + +```sh +npm install -g @nomicfoundation/solidity-language-server +``` + +A language server for the Solidity programming language, built by the Nomic Foundation for the Ethereum community. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.solidity_ls_nomicfoundation.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nomicfoundation-solidity-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "solidity" } + ``` + - `root_dir` : + ```lua + root_pattern("hardhat.config.js", "hardhat.config.ts", "foundry.toml", "remappings.txt", "truffle.js", "truffle-config.js", "ape-config.yaml", ".git", "package.json") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## somesass_ls + + +https://github.com/wkillerud/some-sass/tree/main/packages/language-server + +`some-sass-language-server` can be installed via `npm`: + +```sh +npm i -g some-sass-language-server +``` + +The language server provides: + +- Full support for @use and @forward, including aliases, prefixes and hiding. +- Workspace-wide code navigation and refactoring, such as Rename Symbol. +- Rich documentation through SassDoc. +- Language features for %placeholder-selectors, both when using them and writing them. +- Suggestions and hover info for built-in Sass modules, when used with @use. + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.somesass_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "some-sass-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "scss", "sass" } + ``` + - `name` : + ```lua + "somesass_ls" + ``` + - `root_dir` : + ```lua + root_pattern("package.json", ".git") or bufdir + ``` + - `settings` : + ```lua + { + somesass = { + suggestAllFromOpenDocument = true + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## sorbet + +https://sorbet.org + +Sorbet is a fast, powerful type checker designed for Ruby. + +You can install Sorbet via gem install. You might also be interested in how to set +Sorbet up for new projects: https://sorbet.org/docs/adopting. + +```sh +gem install sorbet +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sorbet.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "srb", "tc", "--lsp" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + + +## sourcekit + +https://github.com/apple/sourcekit-lsp + +Language server for Swift and C/C++/Objective-C. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sourcekit.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "sourcekit-lsp" } + ``` + - `filetypes` : + ```lua + { "swift", "c", "cpp", "objective-c", "objective-cpp" } + ``` + - `root_dir` : + ```lua + root_pattern("buildServer.json", "*.xcodeproj", "*.xcworkspace", ".git", "compile_commands.json", "Package.swift") + ``` + + +## sourcery + +https://github.com/sourcery-ai/sourcery + +Refactor Python instantly using the power of AI. + +It requires the init_options param to be populated as shown below and will respond with the list of ServerCapabilities that it supports: + +```lua +require'lspconfig'.sourcery.setup { + init_options = { + --- The Sourcery token for authenticating the user. + --- This is retrieved from the Sourcery website and must be + --- provided by each user. The extension must provide a + --- configuration option for the user to provide this value. + token = <YOUR_TOKEN>, + + --- The extension's name and version as defined by the extension. + extension_version = 'vim.lsp', + + --- The editor's name and version as defined by the editor. + editor_version = 'vim', + }, +} +``` + +Alternatively, you can login to sourcery by running `sourcery login` with sourcery-cli. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sourcery.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "sourcery", "lsp" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "python", "typescript", "typescriptreact" } + ``` + - `init_options` : + ```lua + { + editor_version = "vim", + extension_version = "vim.lsp" + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## spectral + +https://github.com/luizcorreia/spectral-language-server + `A flexible JSON/YAML linter for creating automated style guides, with baked in support for OpenAPI v2 & v3.` + +`spectral-language-server` can be installed via `npm`: +```sh +npm i -g spectral-language-server +``` +See [vscode-spectral](https://github.com/stoplightio/vscode-spectral#extension-settings) for configuration options. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.spectral.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "spectral-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "yaml", "json", "yml" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + enable = true, + run = "onType", + validateLanguages = { "yaml", "json", "yml" } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## spyglassmc_language_server + +https://github.com/SpyglassMC/Spyglass/tree/main/packages/language-server + +Language server for Minecraft datapacks. + +`spyglassmc-language-server` can be installed via `npm`: + +```sh +npm i -g @spyglassmc/language-server +``` + +You may also need to configure the filetype: + +`autocmd BufNewFile,BufRead *.mcfunction set filetype=mcfunction` + +This is automatically done by [CrystalAlpha358/vim-mcfunction](https://github.com/CrystalAlpha358/vim-mcfunction), which also provide syntax highlight. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.spyglassmc_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "spyglassmc-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "mcfunction" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## sqlls + +https://github.com/joe-re/sql-language-server + +This LSP can be installed via `npm`. Find further instructions on manual installation of the sql-language-server at [joe-re/sql-language-server](https://github.com/joe-re/sql-language-server). +<br> + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sqlls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "sql-language-server", "up", "--method", "stdio" } + ``` + - `filetypes` : + ```lua + { "sql", "mysql" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## sqls + +https://github.com/sqls-server/sqls + +```lua +require'lspconfig'.sqls.setup{ + cmd = {"path/to/command", "-config", "path/to/config.yml"}; + ... +} +``` +Sqls can be installed via `go get github.com/sqls-server/sqls`. Instructions for compiling Sqls from the source can be found at [sqls-server/sqls](https://github.com/sqls-server/sqls). + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.sqls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "sqls" } + ``` + - `filetypes` : + ```lua + { "sql", "mysql" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## standardrb + +https://github.com/testdouble/standard + +Ruby Style Guide, with linter & automatic code fixer. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.standardrb.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "standardrb", "--lsp" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + + +## starlark_rust + +https://github.com/facebookexperimental/starlark-rust/ +The LSP part of `starlark-rust` is not currently documented, + but the implementation works well for linting. +This gives valuable warnings for potential issues in the code, +but does not support refactorings. + +It can be installed with cargo: https://crates.io/crates/starlark + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.starlark_rust.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "starlark", "--lsp" } + ``` + - `filetypes` : + ```lua + { "star", "bzl", "BUILD.bazel" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## starpls + +https://github.com/withered-magic/starpls + +`starpls` is an LSP implementation for Starlark. Installation instructions can be found in the project's README. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.starpls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "starpls" } + ``` + - `filetypes` : + ```lua + { "bzl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## statix + +https://github.com/nerdypepper/statix + +lints and suggestions for the nix programming language + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.statix.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "statix" } + ``` + - `filetypes` : + ```lua + { "nix" } + ``` + - `root_dir` : + ```lua + root_pattern("flake.nix", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## steep + +https://github.com/soutaro/steep + +`steep` is a static type checker for Ruby. + +You need `Steepfile` to make it work. Generate it with `steep init`. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.steep.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "steep", "langserver" } + ``` + - `filetypes` : + ```lua + { "ruby", "eruby" } + ``` + - `root_dir` : + ```lua + root_pattern("Steepfile", ".git") + ``` + + +## stimulus_ls + +https://www.npmjs.com/package/stimulus-language-server + +`stimulus-lsp` can be installed via `npm`: + +```sh +npm install -g stimulus-language-server +``` + +or via `yarn`: + +```sh +yarn global add stimulus-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.stimulus_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "stimulus-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "html", "ruby", "eruby", "blade", "php" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## stylelint_lsp + +https://github.com/bmatcuk/stylelint-lsp + +`stylelint-lsp` can be installed via `npm`: + +```sh +npm i -g stylelint-lsp +``` + +Can be configured by passing a `settings.stylelintplus` object to `stylelint_lsp.setup`: + +```lua +require'lspconfig'.stylelint_lsp.setup{ + settings = { + stylelintplus = { + -- see available options in stylelint-lsp documentation + } + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.stylelint_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "stylelint-lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "css", "less", "scss", "sugarss", "vue", "wxss", "javascript", "javascriptreact", "typescript", "typescriptreact" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## svelte + +https://github.com/sveltejs/language-tools/tree/master/packages/language-server + +Note: assuming that [tsserver](#tsserver) is setup, full JavaScript/TypeScript support (find references, rename, etc of symbols in Svelte files when working in JS/TS files) requires per-project installation and configuration of [typescript-svelte-plugin](https://github.com/sveltejs/language-tools/tree/master/packages/typescript-plugin#usage). + +`svelte-language-server` can be installed via `npm`: +```sh +npm install -g svelte-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.svelte.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "svelteserver", "--stdio" } + ``` + - `filetypes` : + ```lua + { "svelte" } + ``` + - `root_dir` : + ```lua + root_pattern("package.json", ".git") + ``` + + +## svlangserver + +https://github.com/imc-trading/svlangserver + +Language server for SystemVerilog. + +`svlangserver` can be installed via `npm`: + +```sh +$ npm install -g @imc-trading/svlangserver +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.svlangserver.setup{} +``` +**Commands:** +- SvlangserverBuildIndex: Instructs language server to rerun indexing +- SvlangserverReportHierarchy: Generates hierarchy for the given module + +**Default values:** + - `cmd` : + ```lua + { "svlangserver" } + ``` + - `filetypes` : + ```lua + { "verilog", "systemverilog" } + ``` + - `root_dir` : + ```lua + root_pattern(".svlangserver", ".git") + ``` + - `settings` : + ```lua + { + systemverilog = { + includeIndexing = { "*.{v,vh,sv,svh}", "**/*.{v,vh,sv,svh}" } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## svls + +https://github.com/dalance/svls + +Language server for verilog and SystemVerilog + +`svls` can be installed via `cargo`: + ```sh + cargo install svls + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.svls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "svls" } + ``` + - `filetypes` : + ```lua + { "verilog", "systemverilog" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## swift_mesonls + +https://github.com/JCWasmx86/Swift-MesonLSP + +Meson language server written in Swift + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.swift_mesonls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "Swift-MesonLSP", "--lsp" } + ``` + - `filetypes` : + ```lua + { "meson" } + ``` + - `root_dir` : + ```lua + util.root_pattern("meson_options.txt", "meson.options", ".git") + ``` + + +## syntax_tree + +https://ruby-syntax-tree.github.io/syntax_tree/ + +A fast Ruby parser and formatter. + +Syntax Tree is a suite of tools built on top of the internal CRuby parser. It +provides the ability to generate a syntax tree from source, as well as the +tools necessary to inspect and manipulate that syntax tree. It can be used to +build formatters, linters, language servers, and more. + +```sh +gem install syntax_tree +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.syntax_tree.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "stree", "lsp" } + ``` + - `filetypes` : + ```lua + { "ruby" } + ``` + - `root_dir` : + ```lua + root_pattern(".streerc", "Gemfile", ".git") + ``` + + +## tabby_ml + +https://tabby.tabbyml.com/blog/running-tabby-as-a-language-server + +Language server for Tabby, an opensource, self-hosted AI coding assistant. + +`tabby-agent` can be installed via `npm`: + +```sh +npm install --global tabby-agent +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tabby_ml.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tabby-agent", "--lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + {} + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## tailwindcss + +https://github.com/tailwindlabs/tailwindcss-intellisense + +Tailwind CSS Language Server can be installed via npm: +```sh +npm install -g @tailwindcss/language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tailwindcss.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tailwindcss-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "aspnetcorerazor", "astro", "astro-markdown", "blade", "clojure", "django-html", "htmldjango", "edge", "eelixir", "elixir", "ejs", "erb", "eruby", "gohtml", "gohtmltmpl", "haml", "handlebars", "hbs", "html", "html-eex", "heex", "jade", "leaf", "liquid", "markdown", "mdx", "mustache", "njk", "nunjucks", "php", "razor", "slim", "twig", "css", "less", "postcss", "sass", "scss", "stylus", "sugarss", "javascript", "javascriptreact", "reason", "rescript", "typescript", "typescriptreact", "vue", "svelte", "templ" } + ``` + - `init_options` : + ```lua + { + userLanguages = { + eelixir = "html-eex", + eruby = "erb", + templ = "html" + } + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + root_pattern('tailwind.config.js', 'tailwind.config.cjs', 'tailwind.config.mjs', 'tailwind.config.ts', 'postcss.config.js', 'postcss.config.cjs', 'postcss.config.mjs', 'postcss.config.ts', 'package.json', 'node_modules', '.git') + ``` + - `settings` : + ```lua + { + tailwindCSS = { + classAttributes = { "class", "className", "class:list", "classList", "ngClass" }, + lint = { + cssConflict = "warning", + invalidApply = "error", + invalidConfigPath = "error", + invalidScreen = "error", + invalidTailwindDirective = "error", + invalidVariant = "error", + recommendedVariantOrder = "warning" + }, + validate = true + } + } + ``` + + +## taplo + +https://taplo.tamasfe.dev/cli/usage/language-server.html + +Language server for Taplo, a TOML toolkit. + +`taplo-cli` can be installed via `cargo`: +```sh +cargo install --features lsp --locked taplo-cli +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.taplo.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "taplo", "lsp", "stdio" } + ``` + - `filetypes` : + ```lua + { "toml" } + ``` + - `root_dir` : + ```lua + root_pattern("*.toml", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## tblgen_lsp_server + +https://mlir.llvm.org/docs/Tools/MLIRLSP/#tablegen-lsp-language-server--tblgen-lsp-server + +The Language Server for the LLVM TableGen language + +`tblgen-lsp-server` can be installed at the llvm-project repository (https://github.com/llvm/llvm-project) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tblgen_lsp_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tblgen-lsp-server" } + ``` + - `filetypes` : + ```lua + { "tablegen" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## teal_ls + +https://github.com/teal-language/teal-language-server + +Install with: +``` +luarocks install --dev teal-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.teal_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "teal-language-server" } + ``` + - `filetypes` : + ```lua + { "teal" } + ``` + - `root_dir` : + ```lua + root_pattern("tlconfig.lua", ".git") + ``` + + +## templ + +https://templ.guide + +The official language server for the templ HTML templating language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.templ.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "templ", "lsp" } + ``` + - `filetypes` : + ```lua + { "templ" } + ``` + - `root_dir` : + ```lua + root_pattern('go.work', 'go.mod', '.git') + ``` + + +## terraform_lsp + +https://github.com/juliosueiras/terraform-lsp + +Terraform language server +Download a released binary from +https://github.com/juliosueiras/terraform-lsp/releases. + +From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp: + +Both HashiCorp and the maintainer of terraform-lsp expressed interest in +collaborating on a language server and are working towards a _long-term_ +goal of a single stable and feature-complete implementation. + +For the time being both projects continue to exist, giving users the +choice: + +- `terraform-ls` providing + - overall stability (by relying only on public APIs) + - compatibility with any provider and any Terraform >=0.12.0 currently + less features + - due to project being younger and relying on public APIs which may + not offer the same functionality yet + +- `terraform-lsp` providing + - currently more features + - compatibility with a single particular Terraform (0.12.20 at time of writing) + - configs designed for other 0.12 versions may work, but interpretation may be inaccurate + - less stability (due to reliance on Terraform's own internal packages) + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.terraform_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "terraform-lsp" } + ``` + - `filetypes` : + ```lua + { "terraform", "hcl" } + ``` + - `root_dir` : + ```lua + root_pattern(".terraform", ".git") + ``` + + +## terraformls + +https://github.com/hashicorp/terraform-ls + +Terraform language server +Download a released binary from https://github.com/hashicorp/terraform-ls/releases. + +From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp: + +Both HashiCorp and the maintainer of terraform-lsp expressed interest in +collaborating on a language server and are working towards a _long-term_ +goal of a single stable and feature-complete implementation. + +For the time being both projects continue to exist, giving users the +choice: + +- `terraform-ls` providing + - overall stability (by relying only on public APIs) + - compatibility with any provider and any Terraform >=0.12.0 currently + less features + - due to project being younger and relying on public APIs which may + not offer the same functionality yet + +- `terraform-lsp` providing + - currently more features + - compatibility with a single particular Terraform (0.12.20 at time of writing) + - configs designed for other 0.12 versions may work, but interpretation may be inaccurate + - less stability (due to reliance on Terraform's own internal packages) + +Note, that the `settings` configuration option uses the `workspace/didChangeConfiguration` event, +[which is not supported by terraform-ls](https://github.com/hashicorp/terraform-ls/blob/main/docs/features.md). +Instead you should use `init_options` which passes the settings as part of the LSP initialize call +[as is required by terraform-ls](https://github.com/hashicorp/terraform-ls/blob/main/docs/SETTINGS.md#how-to-pass-settings). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.terraformls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "terraform-ls", "serve" } + ``` + - `filetypes` : + ```lua + { "terraform", "terraform-vars" } + ``` + - `root_dir` : + ```lua + root_pattern(".terraform", ".git") + ``` + + +## texlab + +https://github.com/latex-lsp/texlab + +A completion engine built from scratch for (La)TeX. + +See https://github.com/latex-lsp/texlab/wiki/Configuration for configuration options. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.texlab.setup{} +``` +**Commands:** +- TexlabBuild: Build the current buffer +- TexlabForward: Forward search from current position + +**Default values:** + - `cmd` : + ```lua + { "texlab" } + ``` + - `filetypes` : + ```lua + { "tex", "plaintex", "bib" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + texlab = { + auxDirectory = ".", + bibtexFormatter = "texlab", + build = { + args = { "-pdf", "-interaction=nonstopmode", "-synctex=1", "%f" }, + executable = "latexmk", + forwardSearchAfter = false, + onSave = false + }, + chktex = { + onEdit = false, + onOpenAndSave = false + }, + diagnosticsDelay = 300, + formatterLineLength = 80, + forwardSearch = { + args = {} + }, + latexFormatter = "latexindent", + latexindent = { + modifyLineBreaks = false + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## textlsp + +https://github.com/hangyav/textLSP + +`textLSP` is an LSP server for text spell and grammar checking with various AI tools. +It supports multiple text file formats, such as LaTeX, Org or txt. + +For the available text analyzer tools and their configuration, see the [GitHub](https://github.com/hangyav/textLSP) page. +By default, all analyzers are disabled in textLSP, since most of them need special settings. +For quick testing, LanguageTool is enabled in the default `nvim-lspconfig` configuration. + +To install run: `pip install textLSP` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.textlsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "textlsp" } + ``` + - `filetypes` : + ```lua + { "text", "tex", "org" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + { + textLSP = { + analysers = { + languagetool = { + check_text = { + on_change = false, + on_open = true, + on_save = true + }, + enabled = true + } + }, + documents = { + org = { + org_todo_keywords = { "TODO", "IN_PROGRESS", "DONE" } + } + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## tflint + +https://github.com/terraform-linters/tflint + +A pluggable Terraform linter that can act as lsp server. +Installation instructions can be found in https://github.com/terraform-linters/tflint#installation. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tflint.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tflint", "--langserver" } + ``` + - `filetypes` : + ```lua + { "terraform" } + ``` + - `root_dir` : + ```lua + root_pattern(".terraform", ".git", ".tflint.hcl") + ``` + + +## theme_check + +https://github.com/Shopify/shopify-cli + +`theme-check-language-server` is bundled with `shopify-cli` or it can also be installed via + +https://github.com/Shopify/theme-check#installation + +**NOTE:** +If installed via Homebrew, `cmd` must be set to 'theme-check-liquid-server' + +```lua +require lspconfig.theme_check.setup { + cmd = { 'theme-check-liquid-server' } +} +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.theme_check.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "theme-check-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "liquid" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## thriftls + +https://github.com/joyme123/thrift-ls + +you can install thriftls by mason or download binary here: https://github.com/joyme123/thrift-ls/releases + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.thriftls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "thriftls" } + ``` + - `filetypes` : + ```lua + { "thrift" } + ``` + - `root_dir` : + ```lua + root_pattern(".thrift") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## tilt_ls + +https://github.com/tilt-dev/tilt + +Tilt language server. + +You might need to add filetype detection manually: + +```vim +autocmd BufRead Tiltfile setf=tiltfile +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tilt_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tilt", "lsp", "start" } + ``` + - `filetypes` : + ```lua + { "tiltfile" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## tinymist + +https://github.com/Myriad-Dreamin/tinymist +An integrated language service for Typst [taɪpst]. You can also call it "微霭" [wēi ǎi] in Chinese. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tinymist.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tinymist" } + ``` + - `filetypes` : + ```lua + { "typst" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + false + ``` + + +## tsp_server + +https://github.com/microsoft/typespec + +The language server for TypeSpec, a language for defining cloud service APIs and shapes. + +`tsp-server` can be installed together with the typespec compiler via `npm`: +```sh +npm install -g @typespec/compiler +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tsp_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "tsp-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "typespec" } + ``` + - `root_dir` : + ```lua + util.root_pattern("tspconfig.yaml", ".git") + ``` + + +## tsserver + +https://github.com/typescript-language-server/typescript-language-server + +`typescript-language-server` depends on `typescript`. Both packages can be installed via `npm`: +```sh +npm install -g typescript typescript-language-server +``` + +To configure typescript language server, add a +[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or +[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your +project. + +Here's an example that disables type checking in JavaScript files. + +```json +{ + "compilerOptions": { + "module": "commonjs", + "target": "es6", + "checkJs": false + }, + "exclude": [ + "node_modules" + ] +} +``` + +### Vue support + +As of 2.0.0, Volar no longer supports TypeScript itself. Instead, a plugin +adds Vue support to this language server. + +*IMPORTANT*: It is crucial to ensure that `@vue/typescript-plugin` and `volar `are of identical versions. + +```lua +require'lspconfig'.tsserver.setup{ + init_options = { + plugins = { + { + name = "@vue/typescript-plugin", + location = "/usr/local/lib/node_modules/@vue/typescript-plugin", + languages = {"javascript", "typescript", "vue"}, + }, + }, + }, + filetypes = { + "javascript", + "typescript", + "vue", + }, +} + +-- You must make sure volar is setup +-- e.g. require'lspconfig'.volar.setup{} +-- See volar's section for more information +``` + +`location` MUST be defined. If the plugin is installed in `node_modules`, +`location` can have any value. + +`languages` must include `vue` even if it is listed in `filetypes`. + +`filetypes` is extended here to include Vue SFC. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.tsserver.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "typescript-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } + ``` + - `init_options` : + ```lua + { + hostInfo = "neovim" + } + ``` + - `root_dir` : + ```lua + root_pattern("tsconfig.json", "package.json", "jsconfig.json", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## ttags + +https://github.com/npezza93/ttags + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.ttags.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "ttags", "lsp" } + ``` + - `filetypes` : + ```lua + { "ruby", "rust", "javascript", "haskell" } + ``` + - `root_dir` : + ```lua + root_pattern(".git") + ``` + + +## turtle_ls + +https://github.com/stardog-union/stardog-language-servers/tree/master/packages/turtle-language-server +`turtle-language-server`, An editor-agnostic server providing language intelligence (diagnostics, hover tooltips, etc.) for the W3C standard Turtle RDF syntax via the Language Server Protocol. +installable via npm install -g turtle-language-server or yarn global add turtle-language-server. +requires node. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.turtle_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "node", + [3] = "--stdio" + } + ``` + - `filetypes` : + ```lua + { "turtle", "ttl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## twiggy_language_server + +https://github.com/moetelo/twiggy + +`twiggy-language-server` can be installed via `npm`: +```sh +npm install -g twiggy-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.twiggy_language_server.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "twiggy-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "twig" } + ``` + - `root_dir` : + ```lua + root_pattern("composer.json", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## typeprof + +https://github.com/ruby/typeprof + +`typeprof` is the built-in analysis and LSP tool for Ruby 3.1+. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.typeprof.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "typeprof", "--lsp", "--stdio" } + ``` + - `filetypes` : + ```lua + { "ruby", "eruby" } + ``` + - `root_dir` : + ```lua + root_pattern("Gemfile", ".git") + ``` + + +## typos_lsp + +https://github.com/crate-ci/typos +https://github.com/tekumara/typos-lsp + +A Language Server Protocol implementation for Typos, a low false-positive +source code spell checker, written in Rust. Download it from the releases page +on GitHub: https://github.com/tekumara/typos-lsp/releases + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.typos_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "typos-lsp" } + ``` + - `filetypes` : + ```lua + { "*" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + - `single_file_support` : + ```lua + true + ``` + + +## typst_lsp + +https://github.com/nvarner/typst-lsp + +Language server for Typst. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.typst_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "typst-lsp" } + ``` + - `filetypes` : + ```lua + { "typst" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## uiua + +https://github.com/uiua-lang/uiua/ + +The builtin language server of the Uiua interpreter. + +The Uiua interpreter can be installed with `cargo install uiua` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.uiua.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "uiua", "lsp" } + ``` + - `filetypes` : + ```lua + { "uiua" } + ``` + - `root_dir` : + ```lua + root_pattern( + 'main.ua', + 'fmt.ua', + '.git' + ) + + ``` + + +## unison + +https://github.com/unisonweb/unison/blob/trunk/docs/language-server.markdown + + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.unison.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "nc", "localhost", "5757" } + ``` + - `filetypes` : + ```lua + { "unison" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `settings` : + ```lua + {} + ``` + + +## unocss + +https://github.com/xna00/unocss-language-server + +UnoCSS Language Server can be installed via npm: +```sh +npm i unocss-language-server -g +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.unocss.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "unocss-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "html", "javascriptreact", "rescript", "typescriptreact", "vue", "svelte" } + ``` + - `root_dir` : + ```lua + root_pattern('unocss.config.js', 'unocss.config.ts', 'uno.config.js', 'uno.config.ts') + ``` + + +## uvls + +https://codeberg.org/caradhras/uvls +Language server for UVL, written using tree sitter and rust. +You can install the server easily using cargo: +```sh +git clone https://codeberg.org/caradhras/uvls +cd uvls +cargo install --path . +``` +Note: To activate properly nvim needs to know the uvl filetype. +You can add it via: +```lua +vim.cmd(\[\[au BufRead,BufNewFile *.uvl setfiletype uvl\]\]) +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.uvls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "uvls" } + ``` + - `filetypes` : + ```lua + { "uvl" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `single_file_support` : + ```lua + true + ``` + + +## v_analyzer + +https://github.com/v-analyzer/v-analyzer + +V language server. + +`v-analyzer` can be installed by following the instructions [here](https://github.com/v-analyzer/v-analyzer#installation). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.v_analyzer.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "v-analyzer" } + ``` + - `filetypes` : + ```lua + { "v", "vsh", "vv" } + ``` + - `root_dir` : + ```lua + root_pattern("v.mod", ".git") + ``` + + +## vacuum + +Vacuum is the worlds fastest OpenAPI 3, OpenAPI 2 / Swagger linter and quality analysis tool. + +You can install vacuum using mason or follow the instructions here: https://github.com/daveshanley/vacuum + +The file types are not detected automatically, you can register them manually (see below) or override the filetypes: + +```lua +vim.filetype.add { + pattern = { + ['openapi.*%.ya?ml'] = 'yaml.openapi', + ['openapi.*%.json'] = 'json.openapi', + }, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vacuum.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vacuum", "language-server" } + ``` + - `filetypes` : + ```lua + { "yaml.openapi", "json.openapi" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## vala_ls + +https://github.com/Prince781/vala-language-server + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vala_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vala-language-server" } + ``` + - `filetypes` : + ```lua + { "vala", "genie" } + ``` + - `root_dir` : + ```lua + root_pattern("meson.build", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## vale_ls + +https://github.com/errata-ai/vale-ls + +An implementation of the Language Server Protocol (LSP) for the Vale command-line tool. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vale_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vale-ls" } + ``` + - `filetypes` : + ```lua + { "markdown", "text", "tex" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## vdmj + +https://github.com/nickbattle/vdmj + +The VDMJ language server can be installed by cloning the VDMJ repository and +running `mvn clean install`. + +Various options are provided to configure the language server (see below). In +particular: +- `annotation_paths` is a list of folders and/or jar file paths for annotations +that should be used with the language server; +- any value of `debugger_port` less than zero will disable the debugger; note +that if a non-zero value is used, only one instance of the server can be active +at a time. + +More settings for VDMJ can be changed in a file called `vdmj.properties` under +`root_dir/.vscode`. For a description of the available settings, see +[Section 7 of the VDMJ User Guide](https://raw.githubusercontent.com/nickbattle/vdmj/master/vdmj/documentation/UserGuide.pdf). + +Note: proof obligations and combinatorial testing are not currently supported +by neovim. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vdmj.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + Generated from the options given + ``` + - `filetypes` : + ```lua + { "vdmsl", "vdmpp", "vdmrt" } + ``` + - `options` : + ```lua + { + annotation_paths = {}, + debugger_port = -1, + high_precision = false, + java = "$JAVA_HOME/bin/java", + java_opts = { "-Xmx3000m", "-Xss1m" }, + logfile = "path.join(vim.fn.stdpath 'cache', 'vdm-lsp.log')", + mavenrepo = "$HOME/.m2/repository/dk/au/ece/vdmj", + version = "The latest version installed in `mavenrepo`" + } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor(fname) or find_vscode_ancestor(fname) + ``` + + +## verible + +https://github.com/chipsalliance/verible + +A linter and formatter for verilog and SystemVerilog files. + +Release binaries can be downloaded from [here](https://github.com/chipsalliance/verible/releases) +and placed in a directory on PATH. + +See https://github.com/chipsalliance/verible/tree/master/verilog/tools/ls/README.md for options. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.verible.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "verible-verilog-ls" } + ``` + - `filetypes` : + ```lua + { "systemverilog", "verilog" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## veridian + +https://github.com/vivekmalneedi/veridian + +A SystemVerilog LanguageServer. + +Download the latest release for your OS from the releases page + +# install with slang feature, if C++17 compiler is available +cargo install --git https://github.com/vivekmalneedi/veridian.git --all-features +# install if C++17 compiler is not available +cargo install --git https://github.com/vivekmalneedi/veridian.git + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.veridian.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "veridian" } + ``` + - `filetypes` : + ```lua + { "systemverilog", "verilog" } + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## veryl_ls + +https://github.com/veryl-lang/veryl + +Language server for Veryl + +`veryl-ls` can be installed via `cargo`: + ```sh + cargo install veryl-ls + ``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.veryl_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "veryl-ls" } + ``` + - `filetypes` : + ```lua + { "veryl" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## vhdl_ls + +Install vhdl_ls from https://github.com/VHDL-LS/rust_hdl and add it to path + +Configuration + +The language server needs to know your library mapping to perform full analysis of the code. For this it uses a configuration file in the TOML format named vhdl_ls.toml. + +vhdl_ls will load configuration files in the following order of priority (first to last): + + A file named .vhdl_ls.toml in the user home folder. + A file name from the VHDL_LS_CONFIG environment variable. + A file named vhdl_ls.toml in the workspace root. + +Settings in a later files overwrites those from previously loaded files. + +Example vhdl_ls.toml +``` +# File names are either absolute or relative to the parent folder of the vhdl_ls.toml file +[libraries] +lib2.files = [ + 'pkg2.vhd', +] +lib1.files = [ + 'pkg1.vhd', + 'tb_ent.vhd' +] +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vhdl_ls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vhdl_ls" } + ``` + - `filetypes` : + ```lua + { "vhd", "vhdl" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## vimls + +https://github.com/iamcco/vim-language-server + +You can install vim-language-server via npm: +```sh +npm install -g vim-language-server +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vimls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vim-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "vim" } + ``` + - `init_options` : + ```lua + { + diagnostic = { + enable = true + }, + indexes = { + count = 3, + gap = 100, + projectRootPatterns = { "runtime", "nvim", ".git", "autoload", "plugin" }, + runtimepath = true + }, + isNeovim = true, + iskeyword = "@,48-57,_,192-255,-#", + runtimepath = "", + suggest = { + fromRuntimepath = true, + fromVimruntime = true + }, + vimruntime = "" + } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## visualforce_ls + +https://github.com/forcedotcom/salesforcedx-vscode + +Language server for Visualforce. + +For manual installation, download the .vsix archive file from the +[forcedotcom/salesforcedx-vscode](https://github.com/forcedotcom/salesforcedx-vscode) +GitHub releases. Then, configure `cmd` to run the Node script at the unpacked location: + +```lua +require'lspconfig'.visualforce_ls.setup { + cmd = { + 'node', + '/path/to/unpacked/archive/extension/node_modules/@salesforce/salesforcedx-visualforce-language-server/out/src/visualforceServer.js', + '--stdio' + } +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.visualforce_ls.setup{} +``` + + +**Default values:** + - `filetypes` : + ```lua + { "visualforce" } + ``` + - `init_options` : + ```lua + { + embeddedLanguages = { + css = true, + javascript = true + } + } + ``` + - `root_dir` : + ```lua + root_pattern('sfdx-project.json') + ``` + + +## vls + +https://github.com/vlang/vls + +V language server. + +`v-language-server` can be installed by following the instructions [here](https://github.com/vlang/vls#installation). + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "v", "ls" } + ``` + - `filetypes` : + ```lua + { "v", "vlang" } + ``` + - `root_dir` : + ```lua + root_pattern("v.mod", ".git") + ``` + + +## volar + +https://github.com/johnsoncodehk/volar/tree/20d713b/packages/vue-language-server + +Volar language server for Vue + +Volar can be installed via npm: + +```sh +npm install -g @vue/language-server +``` + +Volar by default supports Vue 3 projects. Vue 2 projects need +[additional configuration](https://github.com/vuejs/language-tools/tree/master/packages/vscode-vue#usage). + +**TypeScript support** +As of release 2.0.0, Volar no longer wraps around tsserver. For typescript +support, `tsserver` needs to be configured with the `@vue/typescript-plugin` +plugin. + +**Take Over Mode** + +Volar (prior to 2.0.0), can serve as a language server for both Vue and TypeScript via [Take Over Mode](https://github.com/johnsoncodehk/volar/discussions/471). + +To enable Take Over Mode, override the default filetypes in `setup{}` as follows: + +```lua +require'lspconfig'.volar.setup{ + filetypes = {'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue', 'json'} +} +``` + +**Overriding the default TypeScript Server used by Volar** + +The default config looks for TS in the local `node_modules`. This can lead to issues +e.g. when working on a [monorepo](https://monorepo.tools/). The alternatives are: + +- use a global TypeScript Server installation + +```lua +require'lspconfig'.volar.setup{ + init_options = { + typescript = { + tsdk = '/path/to/.npm/lib/node_modules/typescript/lib' + -- Alternative location if installed as root: + -- tsdk = '/usr/local/lib/node_modules/typescript/lib' + } + } +} +``` + +- use a local server and fall back to a global TypeScript Server installation + +```lua +local util = require 'lspconfig.util' +local function get_typescript_server_path(root_dir) + + local global_ts = '/home/[yourusernamehere]/.npm/lib/node_modules/typescript/lib' + -- Alternative location if installed as root: + -- local global_ts = '/usr/local/lib/node_modules/typescript/lib' + local found_ts = '' + local function check_dir(path) + found_ts = util.path.join(path, 'node_modules', 'typescript', 'lib') + if util.path.exists(found_ts) then + return path + end + end + if util.search_ancestors(root_dir, check_dir) then + return found_ts + else + return global_ts + end +end + +require'lspconfig'.volar.setup{ + on_new_config = function(new_config, new_root_dir) + new_config.init_options.typescript.tsdk = get_typescript_server_path(new_root_dir) + end, +} +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.volar.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vue-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "vue" } + ``` + - `init_options` : + ```lua + { + typescript = { + tsdk = "" + } + } + ``` + - `on_new_config` : + ```lua + see source file + ``` + - `root_dir` : + ```lua + see source file + ``` + + +## vtsls + +https://github.com/yioneko/vtsls + +`vtsls` can be installed with npm: +```sh +npm install -g @vtsls/language-server +``` + +To configure a TypeScript project, add a +[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) +or [`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to +the root of your project. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vtsls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vtsls", "--stdio" } + ``` + - `filetypes` : + ```lua + { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } + ``` + - `root_dir` : + ```lua + root_pattern("tsconfig.json", "package.json", "jsconfig.json", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + +## vuels + +https://github.com/vuejs/vetur/tree/master/server + +Vue language server(vls) +`vue-language-server` can be installed via `npm`: +```sh +npm install -g vls +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.vuels.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "vls" } + ``` + - `filetypes` : + ```lua + { "vue" } + ``` + - `init_options` : + ```lua + { + config = { + css = {}, + emmet = {}, + html = { + suggest = {} + }, + javascript = { + format = {} + }, + stylusSupremacy = {}, + typescript = { + format = {} + }, + vetur = { + completion = { + autoImport = false, + tagCasing = "kebab", + useScaffoldSnippets = false + }, + format = { + defaultFormatter = { + js = "none", + ts = "none" + }, + defaultFormatterOptions = {}, + scriptInitialIndent = false, + styleInitialIndent = false + }, + useWorkspaceDependencies = false, + validation = { + script = true, + style = true, + template = true + } + } + } + } + ``` + - `root_dir` : + ```lua + root_pattern("package.json", "vue.config.js") + ``` + + +## wgsl_analyzer + +https://github.com/wgsl-analyzer/wgsl-analyzer + +`wgsl_analyzer` can be installed via `cargo`: +```sh +cargo install --git https://github.com/wgsl-analyzer/wgsl-analyzer wgsl_analyzer +``` + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.wgsl_analyzer.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "wgsl_analyzer" } + ``` + - `filetypes` : + ```lua + { "wgsl" } + ``` + - `root_dir` : + ```lua + root_pattern(".git" + ``` + - `settings` : + ```lua + {} + ``` + + +## yamlls + +https://github.com/redhat-developer/yaml-language-server + +`yaml-language-server` can be installed via `yarn`: +```sh +yarn global add yaml-language-server +``` + +To use a schema for validation, there are two options: + +1. Add a modeline to the file. A modeline is a comment of the form: + +``` +# yaml-language-server: $schema=<urlToTheSchema|relativeFilePath|absoluteFilePath}> +``` + +where the relative filepath is the path relative to the open yaml file, and the absolute filepath +is the filepath relative to the filesystem root ('/' on unix systems) + +2. Associated a schema url, relative , or absolute (to root of project, not to filesystem root) path to +the a glob pattern relative to the detected project root. Check `:LspInfo` to determine the resolved project +root. + +```lua +require('lspconfig').yamlls.setup { + ... -- other configuration for setup {} + settings = { + yaml = { + ... -- other settings. note this overrides the lspconfig defaults. + schemas = { + ["https://json.schemastore.org/github-workflow.json"] = "/.github/workflows/*", + ["../path/relative/to/file.yml"] = "/.github/workflows/*", + ["/path/from/root/of/project"] = "/.github/workflows/*", + }, + }, + } +} +``` + +Currently, kubernetes is special-cased in yammls, see the following upstream issues: +* [#211](https://github.com/redhat-developer/yaml-language-server/issues/211). +* [#307](https://github.com/redhat-developer/yaml-language-server/issues/307). + +To override a schema to use a specific k8s schema version (for example, to use 1.18): + +```lua +require('lspconfig').yamlls.setup { + ... -- other configuration for setup {} + settings = { + yaml = { + ... -- other settings. note this overrides the lspconfig defaults. + schemas = { + ["https://raw.githubusercontent.com/instrumenta/kubernetes-json-schema/master/v1.18.0-standalone-strict/all.json"] = "/*.k8s.yaml", + ... -- other schemas + }, + }, + } +} +``` + + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.yamlls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "yaml-language-server", "--stdio" } + ``` + - `filetypes` : + ```lua + { "yaml", "yaml.docker-compose", "yaml.gitlab" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + - `settings` : + ```lua + { + redhat = { + telemetry = { + enabled = false + } + } + } + ``` + - `single_file_support` : + ```lua + true + ``` + + +## yang_lsp + +https://github.com/TypeFox/yang-lsp + +A Language Server for the YANG data modeling language. + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.yang_lsp.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "yang-language-server" } + ``` + - `filetypes` : + ```lua + { "yang" } + ``` + - `root_dir` : + ```lua + util.find_git_ancestor + ``` + + +## yls + +https://pypi.org/project/yls-yara/ + +An YLS plugin adding YARA linting capabilities. + +This plugin runs yara.compile on every save, parses the errors, and returns list of diagnostic messages. + +Language Server: https://github.com/avast/yls + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.yls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "yls", "-vv" } + ``` + - `filetypes` : + ```lua + { "yar", "yara" } + ``` + - `root_dir` : + ```lua + see source file + ``` + - `single_file_support` : + ```lua + true + ``` + + +## zk + +https://github.com/mickael-menu/zk + +A plain text note-taking assistant + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.zk.setup{} +``` +**Commands:** +- ZkIndex: ZkIndex +- ZkNew: ZkNew + +**Default values:** + - `cmd` : + ```lua + { "zk", "lsp" } + ``` + - `filetypes` : + ```lua + { "markdown" } + ``` + - `root_dir` : + ```lua + root_pattern(".zk") + ``` + + +## zls + +https://github.com/zigtools/zls + +Zig LSP implementation + Zig Language Server + + + +**Snippet to enable the language server:** +```lua +require'lspconfig'.zls.setup{} +``` + + +**Default values:** + - `cmd` : + ```lua + { "zls" } + ``` + - `filetypes` : + ```lua + { "zig", "zir" } + ``` + - `root_dir` : + ```lua + util.root_pattern("zls.json", "build.zig", ".git") + ``` + - `single_file_support` : + ```lua + true + ``` + + + +vim:ft=markdown diff --git a/start/lspconfig-0.1.8/lua/lspconfig.lua b/start/lspconfig-0.1.8/lua/lspconfig.lua new file mode 100644 index 0000000..0823ec8 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig.lua @@ -0,0 +1,63 @@ +local configs = require 'lspconfig.configs' + +local M = { + util = require 'lspconfig.util', +} + +---@class Alias +---@field to string The new name of the server +---@field version string The version that the alias will be removed in +---@param name string +---@return Alias +local function server_alias(name) + local aliases = { + ['fennel-ls'] = { + to = 'fennel_ls', + version = '0.2.0', + }, + ruby_ls = { + to = 'ruby_lsp', + version = '0.2.0', + }, + ['starlark-rust'] = { + to = 'starlark_rust', + version = '0.2.0', + }, + sumneko_lua = { + to = 'lua_ls', + version = '0.2.0', + }, + } + + return aliases[name] +end + +local mt = {} +function mt:__index(k) + if configs[k] == nil then + local alias = server_alias(k) + if alias then + vim.deprecate(k, alias.to, alias.version, 'lspconfig', false) + k = alias.to + end + + local success, config = pcall(require, 'lspconfig.server_configurations.' .. k) + if success then + configs[k] = config + else + vim.notify( + string.format( + '[lspconfig] Cannot access configuration for %s. Ensure this server is listed in ' + .. '`server_configurations.md` or added as a custom server.', + k + ), + vim.log.levels.WARN + ) + -- Return a dummy function for compatibility with user configs + return { setup = function() end } + end + end + return configs[k] +end + +return setmetatable(M, mt) diff --git a/start/lspconfig-0.1.8/lua/lspconfig/async.lua b/start/lspconfig-0.1.8/lua/lspconfig/async.lua new file mode 100644 index 0000000..eb82b30 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/async.lua @@ -0,0 +1,70 @@ +local M = {} + +function M.run(func) + coroutine.resume(coroutine.create(function() + local status, err = pcall(func) + if not status then + vim.notify(('[lspconfig] unhandled error: %s'):format(tostring(err)), vim.log.levels.WARN) + end + end)) +end + +--- @param cmd string|string[] +--- @return string[]? +function M.run_command(cmd) + local co = assert(coroutine.running()) + + local stdout = {} + local stderr = {} + local exit_code = nil + + local jobid = vim.fn.jobstart(cmd, { + on_stdout = function(_, data, _) + data = table.concat(data, '\n') + if #data > 0 then + stdout[#stdout + 1] = data + end + end, + on_stderr = function(_, data, _) + stderr[#stderr + 1] = table.concat(data, '\n') + end, + on_exit = function(_, code, _) + exit_code = code + coroutine.resume(co) + end, + stdout_buffered = true, + stderr_buffered = true, + }) + + if jobid <= 0 then + vim.notify(('[lspconfig] unable to run cmd: %s'):format(cmd), vim.log.levels.WARN) + return nil + end + + coroutine.yield() + + if exit_code ~= 0 then + vim.notify( + ('[lspconfig] cmd failed with code %d: %s\n%s'):format(exit_code, cmd, table.concat(stderr, '')), + vim.log.levels.WARN + ) + return nil + end + + if next(stdout) == nil then + return nil + end + return stdout and stdout or nil +end + +function M.reenter() + if vim.in_fast_event() then + local co = assert(coroutine.running()) + vim.schedule(function() + coroutine.resume(co) + end) + coroutine.yield() + end +end + +return M diff --git a/start/lspconfig-0.1.8/lua/lspconfig/configs.lua b/start/lspconfig-0.1.8/lua/lspconfig/configs.lua new file mode 100644 index 0000000..04eecce --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/configs.lua @@ -0,0 +1,295 @@ +local util = require 'lspconfig.util' +local async = require 'lspconfig.async' +local api, validate, lsp, uv, fn = vim.api, vim.validate, vim.lsp, vim.loop, vim.fn +local tbl_deep_extend = vim.tbl_deep_extend + +local configs = {} + +--- @class lspconfig.Config : vim.lsp.ClientConfig +--- @field enabled? boolean +--- @field single_file_support? boolean +--- @field filetypes? string[] +--- @field filetype? string +--- @field on_new_config? function +--- @field autostart? boolean +--- @field package _on_attach? fun(client: vim.lsp.Client, bufnr: integer) + +--- @param cmd any +local function sanitize_cmd(cmd) + if cmd and type(cmd) == 'table' and not vim.tbl_isempty(cmd) then + local original = cmd[1] + cmd[1] = vim.fn.exepath(cmd[1]) + if #cmd[1] == 0 then + cmd[1] = original + end + end +end + +function configs.__newindex(t, config_name, config_def) + validate { + name = { config_name, 's' }, + default_config = { config_def.default_config, 't' }, + on_new_config = { config_def.on_new_config, 'f', true }, + on_attach = { config_def.on_attach, 'f', true }, + commands = { config_def.commands, 't', true }, + } + + if config_def.default_config.deprecate then + vim.deprecate( + config_name, + config_def.default_config.deprecate.to, + config_def.default_config.deprecate.version, + 'lspconfig', + false + ) + end + + if config_def.commands then + for k, v in pairs(config_def.commands) do + validate { + ['command.name'] = { k, 's' }, + ['command.fn'] = { v[1], 'f' }, + } + end + else + config_def.commands = {} + end + + local M = {} + + local default_config = tbl_deep_extend('keep', config_def.default_config, util.default_config) + + -- Force this part. + default_config.name = config_name + + --- @param user_config lspconfig.Config + function M.setup(user_config) + local lsp_group = api.nvim_create_augroup('lspconfig', { clear = false }) + + validate { + cmd = { + user_config.cmd, + { 'f', 't' }, + true, + }, + root_dir = { user_config.root_dir, 'f', true }, + filetypes = { user_config.filetype, 't', true }, + on_new_config = { user_config.on_new_config, 'f', true }, + on_attach = { user_config.on_attach, 'f', true }, + commands = { user_config.commands, 't', true }, + } + if user_config.commands then + for k, v in pairs(user_config.commands) do + validate { + ['command.name'] = { k, 's' }, + ['command.fn'] = { v[1], 'f' }, + } + end + end + + local config = tbl_deep_extend('keep', user_config, default_config) + + sanitize_cmd(config.cmd) + + if util.on_setup then + pcall(util.on_setup, config, user_config) + end + + if config.autostart == true then + local event_conf = config.filetypes and { event = 'FileType', pattern = config.filetypes } + or { event = 'BufReadPost' } + api.nvim_create_autocmd(event_conf.event, { + pattern = event_conf.pattern or '*', + callback = function(opt) + M.manager:try_add(opt.buf) + end, + group = lsp_group, + desc = string.format( + 'Checks whether server %s should start a new instance or attach to an existing one.', + config.name + ), + }) + end + + local get_root_dir = config.root_dir + + function M.launch(bufnr) + bufnr = bufnr or api.nvim_get_current_buf() + if not api.nvim_buf_is_valid(bufnr) then + return + end + local bufname = api.nvim_buf_get_name(bufnr) + if (#bufname == 0 and not config.single_file_support) or (#bufname ~= 0 and not util.bufname_valid(bufname)) then + return + end + + local pwd = uv.cwd() + + async.run(function() + local root_dir + if get_root_dir then + root_dir = get_root_dir(util.path.sanitize(bufname), bufnr) + async.reenter() + if not api.nvim_buf_is_valid(bufnr) then + return + end + end + + if root_dir then + api.nvim_create_autocmd('BufReadPost', { + pattern = fn.fnameescape(root_dir) .. '/*', + callback = function(arg) + if #M.manager:clients() == 0 then + return true + end + M.manager:try_add_wrapper(arg.buf, root_dir) + end, + group = lsp_group, + desc = string.format( + 'Checks whether server %s should attach to a newly opened buffer inside workspace %q.', + config.name, + root_dir + ), + }) + + for _, buf in ipairs(api.nvim_list_bufs()) do + local buf_name = api.nvim_buf_get_name(buf) + if util.bufname_valid(buf_name) then + local buf_dir = util.path.sanitize(buf_name) + if buf_dir:sub(1, root_dir:len()) == root_dir then + M.manager:try_add_wrapper(buf, root_dir) + end + end + end + elseif config.single_file_support then + -- This allows on_new_config to use the parent directory of the file + -- Effectively this is the root from lspconfig's perspective, as we use + -- this to attach additional files in the same parent folder to the same server. + -- We just no longer send rootDirectory or workspaceFolders during initialization. + if not api.nvim_buf_is_valid(bufnr) or (#bufname ~= 0 and not util.bufname_valid(bufname)) then + return + end + local pseudo_root = #bufname == 0 and pwd or util.path.dirname(util.path.sanitize(bufname)) + M.manager:add(pseudo_root, true, bufnr) + end + end) + end + + -- Used by :LspInfo + M.get_root_dir = get_root_dir + M.filetypes = config.filetypes + M.handlers = config.handlers + M.cmd = config.cmd + M.autostart = config.autostart + + -- In the case of a reload, close existing things. + local reload = false + if M.manager then + for _, client in ipairs(M.manager:clients()) do + client.stop(true) + end + reload = true + M.manager = nil + end + + local make_config = function(root_dir) + local new_config = tbl_deep_extend('keep', vim.empty_dict(), config) --[[@as lspconfig.Config]] + new_config.capabilities = tbl_deep_extend('keep', new_config.capabilities, { + workspace = { + configuration = true, + }, + }) + + if config_def.on_new_config then + pcall(config_def.on_new_config, new_config, root_dir) + end + if config.on_new_config then + pcall(config.on_new_config, new_config, root_dir) + end + + new_config.on_init = util.add_hook_after(new_config.on_init, function(client, result) + -- Handle offset encoding by default + if result.offsetEncoding then + client.offset_encoding = result.offsetEncoding + end + + -- Send `settings` to server via workspace/didChangeConfiguration + function client.workspace_did_change_configuration(settings) + if not settings then + return + end + if vim.tbl_isempty(settings) then + settings = { [vim.type_idx] = vim.types.dictionary } + end + return client.notify('workspace/didChangeConfiguration', { + settings = settings, + }) + end + end) + + -- Save the old _on_attach so that we can reference it via the BufEnter. + new_config._on_attach = new_config.on_attach + new_config.on_attach = function(client, bufnr) + if bufnr == api.nvim_get_current_buf() then + M._setup_buffer(client.id, bufnr) + else + if api.nvim_buf_is_valid(bufnr) then + api.nvim_create_autocmd('BufEnter', { + callback = function() + M._setup_buffer(client.id, bufnr) + end, + group = lsp_group, + buffer = bufnr, + once = true, + desc = 'Reattaches the server with the updated configurations if changed.', + }) + end + end + end + + new_config.root_dir = root_dir + new_config.workspace_folders = { + { + uri = vim.uri_from_fname(root_dir), + name = string.format('%s', root_dir), + }, + } + return new_config + end + + local manager = require('lspconfig.manager').new(config, make_config) + + M.manager = manager + M.make_config = make_config + if reload and config.autostart ~= false then + for _, bufnr in ipairs(api.nvim_list_bufs()) do + manager:try_add_wrapper(bufnr) + end + end + end + + function M._setup_buffer(client_id, bufnr) + local client = lsp.get_client_by_id(client_id) + if not client then + return + end + local config = client.config --[[@as lspconfig.Config]] + if config._on_attach then + config._on_attach(client, bufnr) + end + if client.config.commands and not vim.tbl_isempty(client.config.commands) then + M.commands = vim.tbl_deep_extend('force', M.commands, client.config.commands) + end + if not M.commands_created and not vim.tbl_isempty(M.commands) then + util.create_module_commands(config_name, M.commands) + end + end + + M.commands = config_def.commands + M.name = config_name + M.document_config = config_def + + rawset(t, config_name, M) +end + +return setmetatable({}, configs) diff --git a/start/lspconfig-0.1.8/lua/lspconfig/manager.lua b/start/lspconfig-0.1.8/lua/lspconfig/manager.lua new file mode 100644 index 0000000..9b2c7d0 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/manager.lua @@ -0,0 +1,302 @@ +local api = vim.api +local lsp = vim.lsp +local uv = vim.loop + +local async = require 'lspconfig.async' +local util = require 'lspconfig.util' + +---@param client vim.lsp.Client +---@param root_dir string +---@return boolean +local function check_in_workspace(client, root_dir) + if not client.workspace_folders then + return false + end + + for _, dir in ipairs(client.workspace_folders) do + if (root_dir .. '/'):sub(1, #dir.name + 1) == dir.name .. '/' then + return true + end + end + + return false +end + +--- @class lspconfig.Manager +--- @field _clients table<string,integer[]> +--- @field config lspconfig.Config +--- @field make_config fun(root_dir: string): lspconfig.Config +local M = {} + +--- @param config lspconfig.Config +--- @param make_config fun(root_dir: string): lspconfig.Config +--- @return lspconfig.Manager +function M.new(config, make_config) + return setmetatable({ + _clients = {}, + config = config, + make_config = make_config, + }, { + __index = M, + }) +end + +--- @private +--- @param clients table<string,integer[]> +--- @param root_dir string +--- @param client_name string +--- @return vim.lsp.Client? +local function get_client(clients, root_dir, client_name) + if vim.tbl_isempty(clients) then + return + end + + if clients[root_dir] then + for _, id in pairs(clients[root_dir]) do + local client = lsp.get_client_by_id(id) + if client and client.name == client_name then + return client + end + end + end + + for _, ids in pairs(clients) do + for _, id in ipairs(ids) do + local client = lsp.get_client_by_id(id) + if client and client.name == client_name then + return client + end + end + end +end + +--- @private +--- @param bufnr integer +--- @param root string +--- @param client_id integer +function M:_attach_and_cache(bufnr, root, client_id) + local clients = self._clients + lsp.buf_attach_client(bufnr, client_id) + if not clients[root] then + clients[root] = {} + end + if not vim.tbl_contains(clients[root], client_id) then + clients[root][#clients[root] + 1] = client_id + end +end + +--- @private +--- @param bufnr integer +--- @param root_dir string +--- @param client vim.lsp.Client +function M:_register_workspace_folders(bufnr, root_dir, client) + local params = { + event = { + added = { { uri = vim.uri_from_fname(root_dir), name = root_dir } }, + removed = {}, + }, + } + client.rpc.notify('workspace/didChangeWorkspaceFolders', params) + if not client.workspace_folders then + client.workspace_folders = {} + end + client.workspace_folders[#client.workspace_folders + 1] = params.event.added[1] + self:_attach_and_cache(bufnr, root_dir, client.id) +end + +--- @private +--- @param bufnr integer +--- @param new_config lspconfig.Config +--- @param root_dir string +--- @param single_file boolean +function M:_start_new_client(bufnr, new_config, root_dir, single_file) + -- do nothing if the client is not enabled + if new_config.enabled == false then + return + end + if not new_config.cmd then + vim.notify( + string.format( + '[lspconfig] cmd not defined for %q. Manually set cmd in the setup {} call according to server_configurations.md, see :help lspconfig-index.', + new_config.name + ), + vim.log.levels.ERROR + ) + return + end + + local clients = self._clients + + new_config.on_exit = util.add_hook_before(new_config.on_exit, function() + for index, id in pairs(clients[root_dir]) do + local exist = assert(lsp.get_client_by_id(id)) + if exist.name == new_config.name then + table.remove(clients[root_dir], index) + end + end + end) + + -- Launch the server in the root directory used internally by lspconfig, if otherwise unset + -- also check that the path exist + if not new_config.cmd_cwd and uv.fs_realpath(root_dir) then + new_config.cmd_cwd = root_dir + end + + -- Sending rootDirectory and workspaceFolders as null is not explicitly + -- codified in the spec. Certain servers crash if initialized with a NULL + -- root directory. + if single_file then + new_config.root_dir = nil + new_config.workspace_folders = nil + end + + -- TODO: Replace lsp.start_client with lsp.start + local client_id, err = lsp.start_client(new_config) + if not client_id then + if err then + vim.notify(err, vim.log.levels.WARN) + end + return + end + self:_attach_and_cache(bufnr, root_dir, client_id) +end + +--- @private +--- @param bufnr integer +--- @param new_config lspconfig.Config +--- @param root_dir string +--- @param client vim.lsp.Client +--- @param single_file boolean +function M:_attach_or_spawn(bufnr, new_config, root_dir, client, single_file) + if check_in_workspace(client, root_dir) then + return self:_attach_and_cache(bufnr, root_dir, client.id) + end + + local supported = vim.tbl_get(client, 'server_capabilities', 'workspace', 'workspaceFolders', 'supported') + if supported then + return self:_register_workspace_folders(bufnr, root_dir, client) + end + self:_start_new_client(bufnr, new_config, root_dir, single_file) +end + +--- @private +--- @param bufnr integer +--- @param new_config lspconfig.Config +--- @param root_dir string +--- @param client vim.lsp.Client +--- @param single_file boolean +function M:_attach_after_client_initialized(bufnr, new_config, root_dir, client, single_file) + local timer = assert(uv.new_timer()) + timer:start( + 0, + 10, + vim.schedule_wrap(function() + if client.initialized and client.server_capabilities and not timer:is_closing() then + self:_attach_or_spawn(bufnr, new_config, root_dir, client, single_file) + timer:stop() + timer:close() + end + end) + ) +end + +---@param root_dir string +---@param single_file boolean +---@param bufnr integer +function M:add(root_dir, single_file, bufnr) + root_dir = util.path.sanitize(root_dir) + local new_config = self.make_config(root_dir) + local client = get_client(self._clients, root_dir, new_config.name) + + if not client then + return self:_start_new_client(bufnr, new_config, root_dir, single_file) + end + + if self._clients[root_dir] or single_file then + lsp.buf_attach_client(bufnr, client.id) + return + end + + -- make sure neovim had exchanged capabilities from language server + -- it's useful to check server support workspaceFolders or not + if client.initialized and client.server_capabilities then + self:_attach_or_spawn(bufnr, new_config, root_dir, client, single_file) + else + self:_attach_after_client_initialized(bufnr, new_config, root_dir, client, single_file) + end +end + +--- @return vim.lsp.Client[] +function M:clients() + local res = {} + for _, client_ids in pairs(self._clients) do + for _, id in ipairs(client_ids) do + res[#res + 1] = lsp.get_client_by_id(id) + end + end + return res +end + +--- Try to attach the buffer `bufnr` to a client using this config, creating +--- a new client if one doesn't already exist for `bufnr`. +--- @param bufnr integer +--- @param project_root? string +function M:try_add(bufnr, project_root) + bufnr = bufnr or api.nvim_get_current_buf() + + if vim.bo[bufnr].buftype == 'nofile' then + return + end + + local bufname = api.nvim_buf_get_name(bufnr) + if #bufname == 0 and not self.config.single_file_support then + return + end + + if #bufname ~= 0 and not util.bufname_valid(bufname) then + return + end + + if project_root then + self:add(project_root, false, bufnr) + return + end + + local buf_path = util.path.sanitize(bufname) + + local get_root_dir = self.config.root_dir + + local pwd = assert(uv.cwd()) + + async.run(function() + local root_dir + if get_root_dir then + root_dir = get_root_dir(buf_path, bufnr) + async.reenter() + if not api.nvim_buf_is_valid(bufnr) then + return + end + end + + if root_dir then + self:add(root_dir, false, bufnr) + elseif self.config.single_file_support then + local pseudo_root = #bufname == 0 and pwd or util.path.dirname(buf_path) + self:add(pseudo_root, true, bufnr) + end + end) +end + +--- Check that the buffer `bufnr` has a valid filetype according to +--- `config.filetypes`, then do `manager.try_add(bufnr)`. +--- @param bufnr integer +--- @param project_root? string +function M:try_add_wrapper(bufnr, project_root) + local config = self.config + -- `config.filetypes = nil` means all filetypes are valid. + if not config.filetypes or vim.tbl_contains(config.filetypes, vim.bo[bufnr].filetype) then + self:try_add(bufnr, project_root) + end +end + +return M diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/agda_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/agda_ls.lua new file mode 100644 index 0000000..07d6e93 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/agda_ls.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'als' }, + filetypes = { 'agda' }, + root_dir = util.root_pattern('.git', '*.agda-lib'), + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/agda/agda-language-server + +Language Server for Agda. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/aiken.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/aiken.lua new file mode 100644 index 0000000..8025fe1 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/aiken.lua @@ -0,0 +1,25 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'aiken', 'lsp' }, + filetypes = { 'aiken' }, + root_dir = function(fname) + return util.root_pattern('aiken.toml', '.git')(fname) + end, + }, + docs = { + description = [[ +https://github.com/aiken-lang/aiken + +A language server for Aiken Programming Language. +[Installation](https://aiken-lang.org/installation-instructions) + +It can be i +]], + default_config = { + cmd = { 'aiken', 'lsp' }, + root_dir = [[root_pattern("aiken.toml", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/als.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/als.lua index 7d916ad..7d916ad 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/als.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/als.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/anakin_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/anakin_language_server.lua new file mode 100644 index 0000000..f0c281c --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/anakin_language_server.lua @@ -0,0 +1,78 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'anakinls' }, + filetypes = { 'python' }, + root_dir = function(fname) + local root_files = { + 'pyproject.toml', + 'setup.py', + 'setup.cfg', + 'requirements.txt', + 'Pipfile', + } + return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + settings = { + anakinls = { + pyflakes_errors = { + -- Full list: https://github.com/PyCQA/pyflakes/blob/master/pyflakes/messages.py + + 'ImportStarNotPermitted', + + 'UndefinedExport', + 'UndefinedLocal', + 'UndefinedName', + + 'DuplicateArgument', + 'MultiValueRepeatedKeyLiteral', + 'MultiValueRepeatedKeyVariable', + + 'FutureFeatureNotDefined', + 'LateFutureImport', + + 'ReturnOutsideFunction', + 'YieldOutsideFunction', + 'ContinueOutsideLoop', + 'BreakOutsideLoop', + + 'TwoStarredExpressions', + 'TooManyExpressionsInStarredAssignment', + + 'ForwardAnnotationSyntaxError', + 'RaiseNotImplemented', + + 'StringDotFormatExtraPositionalArguments', + 'StringDotFormatExtraNamedArguments', + 'StringDotFormatMissingArgument', + 'StringDotFormatMixingAutomatic', + 'StringDotFormatInvalidFormat', + + 'PercentFormatInvalidFormat', + 'PercentFormatMixedPositionalAndNamed', + 'PercentFormatUnsupportedFormat', + 'PercentFormatPositionalCountMismatch', + 'PercentFormatExtraNamedArguments', + 'PercentFormatMissingArgument', + 'PercentFormatExpectedMapping', + 'PercentFormatExpectedSequence', + 'PercentFormatStarRequiresSequence', + }, + }, + }, + }, + docs = { + description = [[ +https://pypi.org/project/anakin-language-server/ + +`anakin-language-server` is yet another Jedi Python language server. + +Available options: + +* Initialization: https://github.com/muffinmad/anakin-language-server#initialization-option +* Configuration: https://github.com/muffinmad/anakin-language-server#configuration-options + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/angularls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/angularls.lua index 4d30de7..a720d44 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/angularls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/angularls.lua @@ -11,29 +11,21 @@ end local default_probe_dir = get_probe_dir(vim.fn.getcwd()) -local bin_name = 'ngserver' -local args = { - '--stdio', - '--tsProbeLocations', - default_probe_dir, - '--ngProbeLocations', - default_probe_dir, -} - -local cmd = { bin_name, unpack(args) } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, unpack(args) } -end - return { default_config = { - cmd = cmd, + cmd = { + 'ngserver', + '--stdio', + '--tsProbeLocations', + default_probe_dir, + '--ngProbeLocations', + default_probe_dir, + }, filetypes = { 'typescript', 'html', 'typescriptreact', 'typescript.tsx' }, - -- Check for angular.json or .git first since that is the root of the project. + -- Check for angular.json since that is the root of the project. -- Don't check for tsconfig.json or package.json since there are multiple of these -- in an angular monorepo setup. - root_dir = util.root_pattern('angular.json', '.git'), + root_dir = util.root_pattern 'angular.json', }, on_new_config = function(new_config, new_root_dir) local new_probe_dir = get_probe_dir(new_root_dir) @@ -69,7 +61,7 @@ require'lspconfig'.angularls.setup{ ``` ]], default_config = { - root_dir = [[root_pattern("angular.json", ".git")]], + root_dir = [[root_pattern("angular.json")]], }, }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ansiblels.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ansiblels.lua index b4bb324..acf78f2 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ansiblels.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ansiblels.lua @@ -1,30 +1,26 @@ local util = require 'lspconfig.util' -local bin_name = 'ansible-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'ansible-language-server', '--stdio' }, settings = { ansible = { python = { interpreterPath = 'python', }, - ansibleLint = { - path = 'ansible-lint', - enabled = true, - }, ansible = { path = 'ansible', }, executionEnvironment = { enabled = false, }, + validation = { + enabled = true, + lint = { + enabled = true, + path = 'ansible-lint', + }, + }, }, }, filetypes = { 'yaml.ansible' }, @@ -33,7 +29,7 @@ return { }, docs = { description = [[ -https://github.com/ansible/ansible-language-server +https://github.com/ansible/vscode-ansible Language server for the ansible configuration management tool. diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/antlersls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/antlersls.lua new file mode 100644 index 0000000..ea4cf87 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/antlersls.lua @@ -0,0 +1,19 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'antlersls', '--stdio' }, + filetypes = { 'html', 'antlers' }, + root_dir = util.root_pattern 'composer.json', + }, + docs = { + description = [[ +https://www.npmjs.com/package/antlers-language-server + +`antlersls` can be installed via `npm`: +```sh +npm install -g antlers-language-server +``` +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/apex_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/apex_ls.lua new file mode 100644 index 0000000..baea475 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/apex_ls.lua @@ -0,0 +1,46 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + filetypes = { 'apexcode' }, + root_dir = util.root_pattern 'sfdx-project.json', + on_new_config = function(config) + if not config.cmd and config.apex_jar_path then + config.cmd = { + vim.env.JAVA_HOME and util.path.join(vim.env.JAVA_HOME, 'bin', 'java') or 'java', + '-cp', + config.apex_jar_path, + '-Ddebug.internal.errors=true', + '-Ddebug.semantic.errors=' .. tostring(config.apex_enable_semantic_errors or false), + '-Ddebug.completion.statistics=' .. tostring(config.apex_enable_completion_statistics or false), + '-Dlwc.typegeneration.disabled=true', + } + if config.apex_jvm_max_heap then + table.insert(config.cmd, '-Xmx' .. config.apex_jvm_max_heap) + end + table.insert(config.cmd, 'apex.jorje.lsp.ApexLanguageServerLauncher') + end + end, + }, + docs = { + description = [[ +https://github.com/forcedotcom/salesforcedx-vscode + +Language server for Apex. + +For manual installation, download the JAR file from the [VSCode +extension](https://github.com/forcedotcom/salesforcedx-vscode/tree/develop/packages/salesforcedx-vscode-apex). + +```lua +require'lspconfig'.apex_ls.setup { + apex_jar_path = '/path/to/apex-jorje-lsp.jar', + apex_enable_semantic_errors = false, -- Whether to allow Apex Language Server to surface semantic errors + apex_enable_completion_statistics = false, -- Whether to allow Apex Language Server to collect telemetry on code completion usage +} +``` +]], + default_config = { + root_dir = [[root_pattern('sfdx-project.json')]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/arduino_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/arduino_language_server.lua new file mode 100644 index 0000000..f1d73e2 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/arduino_language_server.lua @@ -0,0 +1,87 @@ +local util = require 'lspconfig.util' + +local default_capabilities = vim.lsp.protocol.make_client_capabilities() +default_capabilities.textDocument.semanticTokens = vim.NIL +default_capabilities.workspace.semanticTokens = vim.NIL + +return { + default_config = { + filetypes = { 'arduino' }, + root_dir = util.root_pattern '*.ino', + cmd = { + 'arduino-language-server', + }, + capabilities = default_capabilities, + }, + docs = { + description = [[ +https://github.com/arduino/arduino-language-server + +Language server for Arduino + +The `arduino-language-server` can be installed by running: + +``` +go install github.com/arduino/arduino-language-server@latest +``` + +The `arduino-cli` tool must also be installed. Follow [these +installation instructions](https://arduino.github.io/arduino-cli/latest/installation/) for +your platform. + +After installing `arduino-cli`, follow [these +instructions](https://arduino.github.io/arduino-cli/latest/getting-started/#create-a-configuration-file) +for generating a configuration file if you haven't done so already, and make +sure you [install any relevant platforms +libraries](https://arduino.github.io/arduino-cli/latest/getting-started/#install-the-core-for-your-board). + +The language server also requires `clangd` to be installed. Follow [these +installation instructions](https://clangd.llvm.org/installation) for your +platform. + +If you don't have a sketch yet create one. + +```sh +$ arduino-cli sketch new test +$ cd test +``` + +You will need a `sketch.yaml` file in order for the language server to understand your project. It will also save you passing options to `arduino-cli` each time you compile or upload a file. You can generate the file like using the following commands. + + +First gather some information about your board. Make sure your board is connected and run the following: + +```sh +$ arduino-cli board list +Port Protocol Type Board Name FQBN Core +/dev/ttyACM0 serial Serial Port (USB) Arduino Uno arduino:avr:uno arduino:avr +``` + +Then generate the file: + +```sh +arduino-cli board attach -p /dev/ttyACM0 -b arduino:avr:uno test.ino +``` + +The resulting file should like like this: + +```yaml +default_fqbn: arduino:avr:uno +default_port: /dev/ttyACM0 +``` + +Your folder structure should look like this: + +``` +. +├── test.ino +└── sketch.yaml +``` + +For further instruction about configuration options, run `arduino-language-server --help`. + +Note that an upstream bug makes keywords in some cases become undefined by the language server. +Ref: https://github.com/arduino/arduino-ide/issues/159 +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/asm_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/asm_lsp.lua index 102bcba..102bcba 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/asm_lsp.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/asm_lsp.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ast_grep.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ast_grep.lua new file mode 100644 index 0000000..35b0189 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ast_grep.lua @@ -0,0 +1,37 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'ast-grep', 'lsp' }, + filetypes = { -- https://ast-grep.github.io/reference/languages.html + 'c', + 'cpp', + 'rust', + 'go', + 'java', + 'python', + 'javascript', + 'typescript', + 'html', + 'css', + 'kotlin', + 'dart', + 'lua', + }, + root_dir = util.root_pattern('sgconfig.yaml', 'sgconfig.yml'), + }, + docs = { + description = [[ +https://ast-grep.github.io/ + +ast-grep(sg) is a fast and polyglot tool for code structural search, lint, rewriting at large scale. +ast-grep LSP only works in projects that have `sgconfig.y[a]ml` in their root directories. +```sh +npm install [-g] @ast-grep/cli +``` +]], + default_config = { + root_dir = [[root_pattern('sgconfig.yaml', 'sgconfig.yml')]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/astro.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/astro.lua new file mode 100644 index 0000000..c28dcb6 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/astro.lua @@ -0,0 +1,35 @@ +local util = require 'lspconfig.util' + +local function get_typescript_server_path(root_dir) + local project_root = util.find_node_modules_ancestor(root_dir) + return project_root and (util.path.join(project_root, 'node_modules', 'typescript', 'lib')) or '' +end + +return { + default_config = { + cmd = { 'astro-ls', '--stdio' }, + filetypes = { 'astro' }, + root_dir = util.root_pattern('package.json', 'tsconfig.json', 'jsconfig.json', '.git'), + init_options = { + typescript = {}, + }, + on_new_config = function(new_config, new_root_dir) + if vim.tbl_get(new_config.init_options, 'typescript') and not new_config.init_options.typescript.tsdk then + new_config.init_options.typescript.tsdk = get_typescript_server_path(new_root_dir) + end + end, + }, + docs = { + description = [[ +https://github.com/withastro/language-tools/tree/main/packages/language-server + +`astro-ls` can be installed via `npm`: +```sh +npm install -g @astrojs/language-server +``` +]], + default_config = { + root_dir = [[root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/autotools_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/autotools_ls.lua new file mode 100644 index 0000000..f5bc2f7 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/autotools_ls.lua @@ -0,0 +1,29 @@ +local util = require 'lspconfig.util' + +local root_files = { 'configure.ac', 'Makefile', 'Makefile.am', '*.mk' } + +return { + default_config = { + cmd = { 'autotools-language-server' }, + filetypes = { 'config', 'automake', 'make' }, + root_dir = function(fname) + return util.root_pattern(unpack(root_files))(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/Freed-Wu/autotools-language-server + +`autotools-language-server` can be installed via `pip`: +```sh +pip install autotools-language-server +``` + +Language server for autoconf, automake and make using tree sitter in python. +]], + default_config = { + root_dir = { 'configure.ac', 'Makefile', 'Makefile.am', '*.mk' }, + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/awk_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/awk_ls.lua index ff1087d..ff1087d 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/awk_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/awk_ls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/azure_pipelines_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/azure_pipelines_ls.lua new file mode 100644 index 0000000..3e2fe94 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/azure_pipelines_ls.lua @@ -0,0 +1,44 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'azure-pipelines-language-server', '--stdio' }, + filetypes = { 'yaml' }, + root_dir = util.root_pattern 'azure-pipelines.yml', + single_file_support = true, + settings = {}, + }, + docs = { + description = [[ +https://github.com/microsoft/azure-pipelines-language-server + +An Azure Pipelines language server + +`azure-pipelines-ls` can be installed via `npm`: + +```sh +npm install -g azure-pipelines-language-server +``` + +By default `azure-pipelines-ls` will only work in files named `azure-pipelines.yml`, this can be changed by providing additional settings like so: +```lua +require("lspconfig").azure_pipelines_ls.setup { + ... -- other configuration for setup {} + settings = { + yaml = { + schemas = { + ["https://raw.githubusercontent.com/microsoft/azure-pipelines-vscode/master/service-schema.json"] = { + "/azure-pipeline*.y*l", + "/*.azure*", + "Azure-Pipelines/**/*.y*l", + "Pipelines/*.y*l", + }, + }, + }, + }, +} +``` +The Azure Pipelines LSP is a fork of `yaml-language-server` and as such the same settings can be passed to it as `yaml-language-server`. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bacon_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bacon_ls.lua new file mode 100644 index 0000000..8acf12f --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bacon_ls.lua @@ -0,0 +1,39 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'bacon-ls' }, + filetypes = { 'rust' }, + root_dir = util.root_pattern('.bacon-locations', 'Cargo.toml'), + single_file_support = true, + settings = {}, + }, + docs = { + description = [[ +https://github.com/crisidev/bacon-ls + +A Language Server Protocol wrapper for [bacon](https://dystroy.org/bacon/). +It offers textDocument/diagnostic and workspace/diagnostic capabilities for Rust +workspaces using the Bacon export locations file. + +It requires `bacon` and `bacon-ls` to be installed on the system using +[mason.nvim](https://github.com/williamboman/mason.nvim) or manually:util + +```sh +$ cargo install --locked bacon bacon-ls +``` + +Settings can be changed using the `settings` dictionary:util + +```lua +settings = { + -- Bacon export filename, default .bacon-locations + locationsFile = ".bacon-locations", + -- Maximum time in seconds the LSP server waits for Bacon to update the + -- export file before loading the new diagnostics + waitTimeSeconds = 10 +} +``` + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/basedpyright.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/basedpyright.lua new file mode 100644 index 0000000..fa45d14 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/basedpyright.lua @@ -0,0 +1,80 @@ +local util = require 'lspconfig.util' + +local root_files = { + 'pyproject.toml', + 'setup.py', + 'setup.cfg', + 'requirements.txt', + 'Pipfile', + 'pyrightconfig.json', + '.git', +} + +local function organize_imports() + local params = { + command = 'basedpyright.organizeimports', + arguments = { vim.uri_from_bufnr(0) }, + } + + local clients = util.get_lsp_clients { + bufnr = vim.api.nvim_get_current_buf(), + name = 'basedpyright', + } + for _, client in ipairs(clients) do + client.request('workspace/executeCommand', params, nil, 0) + end +end + +local function set_python_path(path) + local clients = util.get_lsp_clients { + bufnr = vim.api.nvim_get_current_buf(), + name = 'basedpyright', + } + for _, client in ipairs(clients) do + if client.settings then + client.settings.python = vim.tbl_deep_extend('force', client.settings.python or {}, { pythonPath = path }) + else + client.config.settings = vim.tbl_deep_extend('force', client.config.settings, { python = { pythonPath = path } }) + end + client.notify('workspace/didChangeConfiguration', { settings = nil }) + end +end + +return { + default_config = { + cmd = { 'basedpyright-langserver', '--stdio' }, + filetypes = { 'python' }, + root_dir = function(fname) + return util.root_pattern(unpack(root_files))(fname) + end, + single_file_support = true, + settings = { + basedpyright = { + analysis = { + autoSearchPaths = true, + useLibraryCodeForTypes = true, + diagnosticMode = 'openFilesOnly', + }, + }, + }, + }, + commands = { + PyrightOrganizeImports = { + organize_imports, + description = 'Organize Imports', + }, + PyrightSetPythonPath = { + set_python_path, + description = 'Reconfigure basedpyright with the provided python path', + nargs = 1, + complete = 'file', + }, + }, + docs = { + description = [[ +https://detachhead.github.io/basedpyright + +`basedpyright`, a static type checker and language server for python +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bashls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bashls.lua new file mode 100644 index 0000000..953da74 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bashls.lua @@ -0,0 +1,37 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'bash-language-server', 'start' }, + settings = { + bashIde = { + -- Glob pattern for finding and parsing shell script files in the workspace. + -- Used by the background analysis features across files. + + -- Prevent recursive scanning which will cause issues when opening a file + -- directly in the home directory (e.g. ~/foo.sh). + -- + -- Default upstream pattern is "**/*@(.sh|.inc|.bash|.command)". + globPattern = vim.env.GLOB_PATTERN or '*@(.sh|.inc|.bash|.command)', + }, + }, + filetypes = { 'sh' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/bash-lsp/bash-language-server + +`bash-language-server` can be installed via `npm`: +```sh +npm i -g bash-language-server +``` + +Language server for bash, written using tree sitter in typescript. +]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/beancount.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/beancount.lua index 1d86d34..c1f3465 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/beancount.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/beancount.lua @@ -2,16 +2,11 @@ local util = require 'lspconfig.util' return { default_config = { - cmd = { 'beancount-langserver', '--stdio' }, - filetypes = { 'beancount' }, + cmd = { 'beancount-language-server', '--stdio' }, + filetypes = { 'beancount', 'bean' }, root_dir = util.find_git_ancestor, single_file_support = true, - init_options = { - -- this is the path to the beancout journal file - journalFile = '', - -- this is the path to the python binary with beancount installed - pythonPath = 'python3', - }, + init_options = {}, }, docs = { description = [[ @@ -20,7 +15,7 @@ https://github.com/polarmutex/beancount-language-server#installation See https://github.com/polarmutex/beancount-language-server#configuration for configuration options ]], default_config = { - root_dir = [[root_pattern("elm.json")]], + root_dir = [[root_pattern(".git")]], }, }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/bicep.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bicep.lua index 1ec7032..1ec7032 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/bicep.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bicep.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/biome.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/biome.lua new file mode 100644 index 0000000..102954e --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/biome.lua @@ -0,0 +1,35 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'biome', 'lsp-proxy' }, + filetypes = { + 'javascript', + 'javascriptreact', + 'json', + 'jsonc', + 'typescript', + 'typescript.tsx', + 'typescriptreact', + 'astro', + 'svelte', + 'vue', + }, + root_dir = util.root_pattern('biome.json', 'biome.jsonc'), + single_file_support = false, + }, + docs = { + description = [[ +https://biomejs.dev + +Toolchain of the web. [Successor of Rome](https://biomejs.dev/blog/annoucing-biome). + +```sh +npm install [-g] @biomejs/biome +``` +]], + default_config = { + root_dir = [[root_pattern('biome.json', 'biome.jsonc')]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bitbake_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bitbake_language_server.lua new file mode 100644 index 0000000..726fa85 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bitbake_language_server.lua @@ -0,0 +1,14 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'bitbake-language-server' }, + filetypes = { 'bitbake' }, + root_dir = util.find_git_ancestor, + }, + docs = { + description = [[ +🛠️ bitbake language server +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/bashls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/blueprint_ls.lua index 3f25c76..6e9e645 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/bashls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/blueprint_ls.lua @@ -1,36 +1,27 @@ local util = require 'lspconfig.util' -local bin_name = 'bash-language-server' -local cmd = { bin_name, 'start' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, 'start' } -end - return { default_config = { - cmd = cmd, + cmd = { 'blueprint-compiler', 'lsp' }, cmd_env = { -- Prevent recursive scanning which will cause issues when opening a file -- directly in the home directory (e.g. ~/foo.sh). -- -- Default upstream pattern is "**/*@(.sh|.inc|.bash|.command)". - GLOB_PATTERN = vim.env.GLOB_PATTERN or '*@(.sh|.inc|.bash|.command)', + GLOB_PATTERN = vim.env.GLOB_PATTERN or '*@(.blp)', }, - filetypes = { 'sh' }, + filetypes = { 'blueprint' }, root_dir = util.find_git_ancestor, single_file_support = true, }, docs = { description = [[ -https://github.com/mads-hartmann/bash-language-server +https://gitlab.gnome.org/jwestman/blueprint-compiler -`bash-language-server` can be installed via `npm`: -```sh -npm i -g bash-language-server -``` +`blueprint-compiler` can be installed via your system package manager. -Language server for bash, written using tree sitter in typescript. +Language server for the blueprint markup language, written in python and part +of the blueprint-compiler. ]], default_config = { root_dir = [[util.find_git_ancestor]], diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bqnlsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bqnlsp.lua new file mode 100644 index 0000000..5d18e99 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bqnlsp.lua @@ -0,0 +1,45 @@ +local util = require 'lspconfig.util' + +-- set os dependent library path +local function library_path(path, cmd_env) + path = path or '/usr/local/lib' + cmd_env = cmd_env or {} + if vim.fn.has 'macunix' and not cmd_env.DYLD_LIBRARY_PATH then + cmd_env.DYLD_LIBRARY_PATH = path + elseif vim.fn.has 'linux' and not cmd_env.LD_LIBRARY_PATH then + cmd_env.LD_LIBRARY_PATH = path + end + return cmd_env +end + +return { + default_config = { + cmd = { 'bqnlsp' }, + filetypes = { 'bqn' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + libcbqnPath = nil, + on_new_config = function(new_config, _) + if new_config.libcbqnPath then + new_config.cmd_env = library_path(new_config.libcbqnPath, new_config.cmd_env) + end + end, + }, + docs = { + description = [[ +https://git.sr.ht/~detegr/bqnlsp + + +`bqnlsp`, a language server for BQN. + +The binary depends on the shared library of [CBQN](https://github.com/dzaima/CBQN) `libcbqn.so`. +If CBQN is installed system-wide (using `sudo make install` in its source directory) and `bqnlsp` errors that it can't find the shared library, update the linker cache by executing `sudo ldconfig`. +If CBQN has been installed in a non-standard directory or can't be installed globally pass `libcbqnPath = '/path/to/CBQN'` to the setup function. +This will set the environment variables `LD_LIBRARY_PATH` (Linux) or `DYLD_LIBRARY_PATH` (macOS) to the provided path. + + ]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bright_script.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bright_script.lua new file mode 100644 index 0000000..6d4ba82 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bright_script.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig/util' + +return { + default_config = { + cmd = { 'bsc', '--lsp', '--stdio' }, + filetypes = { 'brs' }, + single_file_support = true, + root_dir = util.root_pattern('makefile', 'Makefile', '.git'), + }, + docs = { + description = [[ +https://github.com/RokuCommunity/brighterscript + +`brightscript` can be installed via `npm`: +```sh +npm install -g brighterscript +``` +]], + default_config = { + root_dir = [[root_pattern(".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/bsl_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bsl_ls.lua index fef15f9..fef15f9 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/bsl_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bsl_ls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/buck2.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/buck2.lua new file mode 100644 index 0000000..134a562 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/buck2.lua @@ -0,0 +1,27 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'buck2', 'lsp' }, + filetypes = { 'bzl' }, + root_dir = function(fname) + return util.root_pattern '.buckconfig'(fname) + end, + }, + docs = { + description = [=[ +https://github.com/facebook/buck2 + +Build system, successor to Buck + +To better detect Buck2 project files, the following can be added: + +``` +vim.cmd [[ autocmd BufRead,BufNewFile *.bxl,BUCK,TARGETS set filetype=bzl ]] +``` +]=], + default_config = { + root_dir = [[root_pattern(".buckconfig")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/buddy_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/buddy_ls.lua new file mode 100644 index 0000000..7343dd3 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/buddy_ls.lua @@ -0,0 +1,18 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'buddy-lsp-server' }, + filetypes = { 'mlir' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/buddy-compiler/buddy-mlir#buddy-lsp-server +The Language Server for the buddy-mlir, a drop-in replacement for mlir-lsp-server, +supporting new dialects defined in buddy-mlir. +`buddy-lsp-server` can be installed at the buddy-mlir repository (buddy-compiler/buddy-mlir) +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bufls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bufls.lua new file mode 100644 index 0000000..ba12ddb --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bufls.lua @@ -0,0 +1,26 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'bufls', 'serve' }, + filetypes = { 'proto' }, + root_dir = function(fname) + return util.root_pattern('buf.work.yaml', '.git')(fname) + end, + }, + docs = { + description = [[ +https://github.com/bufbuild/buf-language-server + +`buf-language-server` can be installed via `go install`: +```sh +go install github.com/bufbuild/buf-language-server/cmd/bufls@latest +``` + +bufls is a Protobuf language server compatible with Buf modules and workspaces +]], + default_config = { + root_dir = [[root_pattern("buf.work.yaml", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bzl.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bzl.lua new file mode 100644 index 0000000..a2200f6 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/bzl.lua @@ -0,0 +1,22 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'bzl', 'lsp', 'serve' }, + filetypes = { 'bzl' }, + -- https://docs.bazel.build/versions/5.4.1/build-ref.html#workspace + root_dir = util.root_pattern('WORKSPACE', 'WORKSPACE.bazel'), + }, + docs = { + description = [[ +https://bzl.io/ + +https://docs.stack.build/docs/cli/installation + +https://docs.stack.build/docs/vscode/starlark-language-server +]], + default_config = { + root_dir = [[root_pattern(".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cadence.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cadence.lua new file mode 100644 index 0000000..640fe5a --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cadence.lua @@ -0,0 +1,32 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'flow', 'cadence', 'language-server' }, + filetypes = { 'cdc' }, + init_options = { + numberOfAccounts = '1', + }, + root_dir = function(fname, _) + return util.root_pattern 'flow.json'(fname) or vim.env.HOME + end, + on_new_config = function(new_config, new_root_dir) + new_config.init_options.configPath = util.path.join(new_root_dir, 'flow.json') + end, + }, + docs = { + description = [[ +[Cadence Language Server](https://github.com/onflow/cadence-tools/tree/master/languageserver) +using the [flow-cli](https://developers.flow.com/tools/flow-cli). + +The `flow` command from flow-cli must be available. For install instructions see +[the docs](https://developers.flow.com/tools/flow-cli/install#install-the-flow-cli) or the +[Github page](https://github.com/onflow/flow-cli). + +By default the configuration is taken from the closest `flow.json` or the `flow.json` in the users home directory. +]], + default_config = { + root_dir = [[util.root_pattern('flow.json') or vim.env.HOME]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cairo_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cairo_ls.lua new file mode 100644 index 0000000..e79b34a --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cairo_ls.lua @@ -0,0 +1,30 @@ +local util = require 'lspconfig.util' + +local bin_name = 'cairo-language-server' +local cmd = { bin_name, '/C', '--node-ipc' } + +return { + default_config = { + init_options = { hostInfo = 'neovim' }, + cmd = cmd, + filetypes = { 'cairo' }, + root_dir = util.root_pattern('Scarb.toml', 'cairo_project.toml', '.git'), + }, + docs = { + description = [[ +[Cairo Language Server](https://github.com/starkware-libs/cairo/tree/main/crates/cairo-lang-language-server) + +First, install cairo following [this tutorial](https://medium.com/@elias.tazartes/ahead-of-the-curve-install-cairo-1-0-alpha-and-prepare-for-regenesis-85f4e3940e20) + +Then enable cairo language server in your lua configuration. +```lua +require'lspconfig'.cairo_ls.setup{} +``` + +*cairo-language-server is still under active development, some features might not work yet !* +]], + default_config = { + root_dir = [[root_pattern("Scarb.toml", "cairo_project.toml", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ccls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ccls.lua index dd642db..72977df 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ccls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ccls.lua @@ -1,10 +1,17 @@ local util = require 'lspconfig.util' +local root_files = { + 'compile_commands.json', + '.ccls', +} + return { default_config = { cmd = { 'ccls' }, - filetypes = { 'c', 'cpp', 'objc', 'objcpp' }, - root_dir = util.root_pattern('compile_commands.json', '.ccls', '.git'), + filetypes = { 'c', 'cpp', 'objc', 'objcpp', 'cuda' }, + root_dir = function(fname) + return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) + end, offset_encoding = 'utf-32', -- ccls does not support sending a null root directory single_file_support = false, @@ -37,7 +44,7 @@ lspconfig.ccls.setup { ]], default_config = { - root_dir = [[root_pattern("compile_commands.json", ".ccls", ".git")]], + root_dir = [[root_pattern('compile_commands.json', '.ccls', '.git')]], }, }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cds_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cds_lsp.lua new file mode 100644 index 0000000..a04876f --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cds_lsp.lua @@ -0,0 +1,33 @@ +local util = require 'lspconfig.util' + +local root_files = { + 'package.json', + 'db', + 'srv', +} + +return { + default_config = { + cmd = { 'cds-lsp', '--stdio' }, + filetypes = { 'cds' }, + -- init_options = { provideFormatter = true }, -- needed to enable formatting capabilities + root_dir = util.root_pattern(unpack(root_files)), + single_file_support = true, + settings = { + cds = { validate = true }, + }, + }, + docs = { + description = [[ + +https://cap.cloud.sap/docs/ + +`cds-lsp` can be installed via `npm`: + +```sh +npm i -g @sap/cds-lsp +``` + +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/circom-lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/circom-lsp.lua new file mode 100644 index 0000000..dda5408 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/circom-lsp.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig/util' + +return { + default_config = { + cmd = { 'circom-lsp' }, + filetypes = { 'circom' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +[Circom Language Server](https://github.com/rubydusa/circom-lsp) + +`circom-lsp`, the language server for the Circom language. + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/clangd.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/clangd.lua index 4e0f2d7..732f556 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/clangd.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/clangd.lua @@ -30,23 +30,19 @@ local root_files = { 'configure.ac', -- AutoTools } -local default_capabilities = vim.tbl_deep_extend( - 'force', - util.default_config.capabilities or vim.lsp.protocol.make_client_capabilities(), - { - textDocument = { - completion = { - editsNearCursor = true, - }, +local default_capabilities = { + textDocument = { + completion = { + editsNearCursor = true, }, - offsetEncoding = { 'utf-8', 'utf-16' }, - } -) + }, + offsetEncoding = { 'utf-8', 'utf-16' }, +} return { default_config = { cmd = { 'clangd' }, - filetypes = { 'c', 'cpp', 'objc', 'objcpp' }, + filetypes = { 'c', 'cpp', 'objc', 'objcpp', 'cuda', 'proto' }, root_dir = function(fname) return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) end, @@ -65,9 +61,14 @@ return { description = [[ https://clangd.llvm.org/installation.html -**NOTE:** Clang >= 11 is recommended! See [this issue for more](https://github.com/neovim/nvim-lsp/issues/23). - -clangd relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified as compile_commands.json, see https://clangd.llvm.org/installation#compile_commandsjson +- **NOTE:** Clang >= 11 is recommended! See [#23](https://github.com/neovim/nvim-lsp/issues/23). +- If `compile_commands.json` lives in a build directory, you should + symlink it to the root of your source tree. + ``` + ln -s /path/to/myproject/build/compile_commands.json /path/to/myproject/ + ``` +- clangd relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) + specified as compile_commands.json, see https://clangd.llvm.org/installation#compile_commandsjson ]], default_config = { root_dir = [[ diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/clarity_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/clarity_lsp.lua index 72a6197..72a6197 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/clarity_lsp.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/clarity_lsp.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/clojure_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/clojure_lsp.lua index 5340693..45b1dd6 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/clojure_lsp.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/clojure_lsp.lua @@ -4,16 +4,16 @@ return { default_config = { cmd = { 'clojure-lsp' }, filetypes = { 'clojure', 'edn' }, - root_dir = util.root_pattern('project.clj', 'deps.edn', 'build.boot', 'shadow-cljs.edn', '.git'), + root_dir = util.root_pattern('project.clj', 'deps.edn', 'build.boot', 'shadow-cljs.edn', '.git', 'bb.edn'), }, docs = { description = [[ -https://github.com/snoe/clojure-lsp +https://github.com/clojure-lsp/clojure-lsp Clojure Language Server ]], default_config = { - root_dir = [[root_pattern("project.clj", "deps.edn", "build.boot", "shadow-cljs.edn", ".git")]], + root_dir = [[root_pattern("project.clj", "deps.edn", "build.boot", "shadow-cljs.edn", ".git", "bb.edn")]], }, }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/cmake.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cmake.lua index d334535..7f27fea 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/cmake.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cmake.lua @@ -1,12 +1,12 @@ local util = require 'lspconfig.util' -local root_files = { 'CMakeLists.txt', 'cmake' } +local root_files = { 'CMakePresets.json', 'CTestConfig.cmake', '.git', 'build', 'cmake' } return { default_config = { cmd = { 'cmake-language-server' }, filetypes = { 'cmake' }, root_dir = function(fname) - return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) + return util.root_pattern(unpack(root_files))(fname) end, single_file_support = true, init_options = { @@ -20,7 +20,7 @@ https://github.com/regen100/cmake-language-server CMake LSP Implementation ]], default_config = { - root_dir = [[root_pattern(".git", "compile_commands.json", "build")]], + root_dir = [[root_pattern('CMakePresets.json', 'CTestConfig.cmake', '.git', 'build', 'cmake')]], }, }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cobol_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cobol_ls.lua new file mode 100644 index 0000000..867271b --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cobol_ls.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'cobol-language-support' }, + filetypes = { 'cobol' }, + root_dir = util.find_git_ancestor, + }, + docs = { + description = [[ +Cobol language support + ]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/codeqlls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/codeqlls.lua index 9184d2f..695041e 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/codeqlls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/codeqlls.lua @@ -1,5 +1,7 @@ local util = require 'lspconfig.util' +local workspace_folders = {} + return { default_config = { cmd = { 'codeql', 'execute', 'language-server', '--check-errors', 'ON_CHANGE', '-q' }, @@ -7,12 +9,8 @@ return { root_dir = util.root_pattern 'qlpack.yml', log_level = vim.lsp.protocol.MessageType.Warning, before_init = function(initialize_params) - initialize_params['workspaceFolders'] = { - { - name = 'workspace', - uri = initialize_params['rootUri'], - }, - } + table.insert(workspace_folders, { name = 'workspace', uri = initialize_params['rootUri'] }) + initialize_params['workspaceFolders'] = workspace_folders end, settings = { search_path = vim.empty_dict(), @@ -21,7 +19,7 @@ return { docs = { description = [[ Reference: -https://help.semmle.com/codeql/codeql-cli.html +https://codeql.github.com/docs/codeql-cli/ Binaries: https://github.com/github/codeql-cli-binaries @@ -37,6 +35,10 @@ https://github.com/github/codeql-cli-binaries local search_path = '--search-path=' for _, path in ipairs(config.settings.search_path) do search_path = search_path .. vim.fn.expand(path) .. ':' + table.insert(workspace_folders, { + name = 'workspace', + uri = string.format('file://%s', path), + }) end config.cmd = { 'codeql', 'execute', 'language-server', '--check-errors', 'ON_CHANGE', '-q', search_path } else diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/coffeesense.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/coffeesense.lua new file mode 100644 index 0000000..f5b75a8 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/coffeesense.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'coffeesense-language-server', '--stdio' }, + filetypes = { 'coffee' }, + root_dir = util.root_pattern 'package.json', + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/phil294/coffeesense + +CoffeeSense Language Server +`coffeesense-language-server` can be installed via `npm`: +```sh +npm install -g coffeesense-language-server +``` +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/contextive.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/contextive.lua new file mode 100644 index 0000000..b05309d --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/contextive.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'Contextive.LanguageServer' }, + root_dir = util.root_pattern('.contextive', '.git'), + }, + docs = { + description = [[ +https://github.com/dev-cycles/contextive + +Language Server for Contextive. + +Contextive allows you to define terms in a central file and provides auto-completion suggestions and hover panels for these terms wherever they're used. + +To install the language server, you need to download the appropriate [GitHub release asset](https://github.com/dev-cycles/contextive/releases/) for your operating system and architecture. + +After the download unzip the Contextive.LanguageServer binary and copy the file into a folder that is included in your system's PATH. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/coq_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/coq_lsp.lua new file mode 100644 index 0000000..aa492d4 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/coq_lsp.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'coq-lsp' }, + filetypes = { 'coq' }, + root_dir = function(fname) + return util.root_pattern '_CoqProject'(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/ejgallego/coq-lsp/ +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/crystalline.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/crystalline.lua index ef4d6bc..ef4d6bc 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/crystalline.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/crystalline.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/csharp_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/csharp_ls.lua index 828cba4..131862f 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/csharp_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/csharp_ls.lua @@ -3,7 +3,9 @@ local util = require 'lspconfig.util' return { default_config = { cmd = { 'csharp-ls' }, - root_dir = util.root_pattern('*.sln', '*.csproj', '.git'), + root_dir = function(fname) + return util.root_pattern '*.sln'(fname) or util.root_pattern '*.csproj'(fname) + end, filetypes = { 'cs' }, init_options = { AutomaticWorkspaceInit = true, diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/css_variables.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/css_variables.lua new file mode 100644 index 0000000..dd9257d --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/css_variables.lua @@ -0,0 +1,65 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'css-variables-language-server', '--stdio' }, + filetypes = { 'css', 'scss', 'less' }, + root_dir = util.root_pattern('package.json', '.git'), + -- Same as inlined defaults that don't seem to work without hardcoding them in the lua config + -- https://github.com/vunguyentuan/vscode-css-variables/blob/763a564df763f17aceb5f3d6070e0b444a2f47ff/packages/css-variables-language-server/src/CSSVariableManager.ts#L31-L50 + settings = { + cssVariables = { + lookupFiles = { '**/*.less', '**/*.scss', '**/*.sass', '**/*.css' }, + blacklistFolders = { + '**/.cache', + '**/.DS_Store', + '**/.git', + '**/.hg', + '**/.next', + '**/.svn', + '**/bower_components', + '**/CVS', + '**/dist', + '**/node_modules', + '**/tests', + '**/tmp', + }, + }, + }, + }, + docs = { + description = [[ +https://github.com/vunguyentuan/vscode-css-variables/tree/master/packages/css-variables-language-server + +CSS variables autocompletion and go-to-definition + +`css-variables-language-server` can be installed via `npm`: + +```sh +npm i -g css-variables-language-server +``` +]], + default_config = { + root_dir = [[root_pattern("package.json", ".git") or bufdir]], + settings = [[ +cssVariables = { + lookupFiles = { '**/*.less', '**/*.scss', '**/*.sass', '**/*.css' }, + blacklistFolders = { + '**/.cache', + '**/.DS_Store', + '**/.git', + '**/.hg', + '**/.next', + '**/.svn', + '**/bower_components', + '**/CVS', + '**/dist', + '**/node_modules', + '**/tests', + '**/tmp', + }, +}, + ]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/cssls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cssls.lua index 41c38e6..ac8e6a1 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/cssls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cssls.lua @@ -1,16 +1,10 @@ local util = require 'lspconfig.util' -local bin_name = 'vscode-css-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'vscode-css-language-server', '--stdio' }, filetypes = { 'css', 'scss', 'less' }, + init_options = { provideFormatter = true }, -- needed to enable formatting capabilities root_dir = util.root_pattern('package.json', '.git'), single_file_support = true, settings = { diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/cssmodules_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cssmodules_ls.lua index 3107b75..d7f5e3d 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/cssmodules_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cssmodules_ls.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'cssmodules-language-server' -local cmd = { bin_name } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name } -end - return { default_config = { - cmd = cmd, + cmd = { 'cssmodules-language-server' }, filetypes = { 'javascript', 'javascriptreact', 'typescript', 'typescriptreact' }, root_dir = util.find_package_json_ancestor, }, diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/cucumber_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cucumber_language_server.lua index 0783206..1fb4b8a 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/cucumber_language_server.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cucumber_language_server.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'cucumber-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'cucumber-language-server', '--stdio' }, filetypes = { 'cucumber' }, root_dir = util.find_git_ancestor, }, diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/custom_elements_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/custom_elements_ls.lua new file mode 100644 index 0000000..e71d7f8 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/custom_elements_ls.lua @@ -0,0 +1,39 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + init_options = { hostInfo = 'neovim' }, + cmd = { 'custom-elements-languageserver', '--stdio' }, + root_dir = util.root_pattern('tsconfig.json', 'package.json', 'jsconfig.json', '.git'), + }, + docs = { + description = [[ +https://github.com/Matsuuu/custom-elements-language-server + +`custom-elements-languageserver` depends on `typescript`. Both packages can be installed via `npm`: +```sh +npm install -g typescript custom-elements-languageserver +``` +To configure typescript language server, add a +[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or +[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your +project. +Here's an example that disables type checking in JavaScript files. +```json +{ + "compilerOptions": { + "module": "commonjs", + "target": "es6", + "checkJs": false + }, + "exclude": [ + "node_modules" + ] +} +``` +]], + default_config = { + root_dir = [[root_pattern("tsconfig.json", "package.json", "jsconfig.json", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cypher_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cypher_ls.lua new file mode 100644 index 0000000..7c0cf2c --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/cypher_ls.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'cypher-language-server', '--stdio' }, + filetypes = { 'cypher' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/neo4j/cypher-language-support/tree/main/packages/language-server + +`cypher-language-server`, language server for Cypher query language. +Part of the umbrella project cypher-language-support: https://github.com/neo4j/cypher-language-support + +`cypher-language-server` can be installed via `npm`: +```sh +npm i -g @neo4j-cypher/language-server +``` +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dafny.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dafny.lua new file mode 100644 index 0000000..be5e72b --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dafny.lua @@ -0,0 +1,22 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'dafny', 'server' }, + filetypes = { 'dfy', 'dafny' }, + root_dir = function(fname) + util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ + Support for the Dafny language server. + + The default `cmd` uses "dafny server", which works on Dafny 4.0.0+. For + older versions of Dafny, you can compile the language server from source at + [dafny-lang/language-server-csharp](https://github.com/dafny-lang/language-server-csharp) + and set `cmd = {"dotnet", "<Path to your language server>"}`. + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dagger.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dagger.lua new file mode 100644 index 0000000..734249f --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dagger.lua @@ -0,0 +1,22 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'cuelsp' }, + filetypes = { 'cue' }, + root_dir = function(fname) + return util.root_pattern('cue.mod', '.git')(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/dagger/cuelsp + +Dagger's lsp server for cuelang. +]], + default_config = { + root_dir = [[root_pattern("cue.mod", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dartls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dartls.lua new file mode 100644 index 0000000..83eda99 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dartls.lua @@ -0,0 +1,32 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'dart', 'language-server', '--protocol=lsp' }, + filetypes = { 'dart' }, + root_dir = util.root_pattern 'pubspec.yaml', + init_options = { + onlyAnalyzeProjectsWithOpenFiles = true, + suggestFromUnimportedLibraries = true, + closingLabels = true, + outline = true, + flutterOutline = true, + }, + settings = { + dart = { + completeFunctionCalls = true, + showTodos = true, + }, + }, + }, + docs = { + description = [[ +https://github.com/dart-lang/sdk/tree/master/pkg/analysis_server/tool/lsp_spec + +Language server for dart. +]], + default_config = { + root_dir = [[root_pattern("pubspec.yaml")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dcmls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dcmls.lua new file mode 100644 index 0000000..9667471 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dcmls.lua @@ -0,0 +1,19 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'dcm', 'start-server', '--client=neovim' }, + filetypes = { 'dart' }, + root_dir = util.root_pattern 'pubspec.yaml', + }, + docs = { + description = [[ +https://dcm.dev/ + +Language server for DCM analyzer. +]], + default_config = { + root_dir = [[root_pattern("pubspec.yaml")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/debputy.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/debputy.lua new file mode 100644 index 0000000..eac358d --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/debputy.lua @@ -0,0 +1,16 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'debputy', 'lsp', 'server' }, + filetypes = { 'debcontrol', 'debcopyright', 'debchangelog', 'make', 'yaml' }, + root_dir = util.root_pattern 'debian', + }, + docs = { + description = [[ +https://salsa.debian.org/debian/debputy + +Language Server for Debian packages. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/delphi_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/delphi_ls.lua new file mode 100644 index 0000000..bd02d6f --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/delphi_ls.lua @@ -0,0 +1,49 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'DelphiLSP.exe' }, + filetypes = { 'pascal' }, + root_dir = util.root_pattern '*.dpr', + single_file_support = false, + }, + docs = { + description = [[ +Language server for Delphi from Embarcadero. +https://marketplace.visualstudio.com/items?itemName=EmbarcaderoTechnologies.delphilsp + +Note, the '*.delphilsp.json' file is required, more details at: +https://docwiki.embarcadero.com/RADStudio/Alexandria/en/Using_DelphiLSP_Code_Insight_with_Other_Editors + +Below, you'll find a sample configuration for the lazy manager. +When on_attach is triggered, it signals DelphiLSP to load settings from a configuration file. +Without this step, DelphiLSP initializes but remains non-functional: + +```lua +"neovim/nvim-lspconfig", +lazy = false, +config = function() + local capabilities = require("cmp_nvim_lsp").default_capabilities() + local lspconfig = require("lspconfig") + + lspconfig.delphi_ls.setup({ + capabilities = capabilities, + + on_attach = function(client) + local lsp_config = vim.fs.find(function(name) + return name:match(".*%.delphilsp.json$") + end, { type = "file", path = client.config.root_dir, upward = false })[1] + + if lsp_config then + client.config.settings = { settingsFile = lsp_config } + client.notify("workspace/didChangeConfiguration", { settings = client.config.settings }) + else + vim.notify_once("delphi_ls: '*.delphilsp.json' config file not found") + end + end, + }) +end, +``` +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/denols.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/denols.lua new file mode 100644 index 0000000..81bc1e6 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/denols.lua @@ -0,0 +1,127 @@ +local util = require 'lspconfig.util' +local lsp = vim.lsp + +local function buf_cache(bufnr, client) + local params = { + command = 'deno.cache', + arguments = { {}, vim.uri_from_bufnr(bufnr) }, + } + client.request('workspace/executeCommand', params, function(err, _result, ctx) + if err then + local uri = ctx.params.arguments[2] + vim.api.nvim_err_writeln('cache command failed for ' .. vim.uri_to_fname(uri)) + end + end, bufnr) +end + +local function virtual_text_document_handler(uri, res, client) + if not res then + return nil + end + + local lines = vim.split(res.result, '\n') + local bufnr = vim.uri_to_bufnr(uri) + + local current_buf = vim.api.nvim_buf_get_lines(bufnr, 0, -1, false) + if #current_buf ~= 0 then + return nil + end + + vim.api.nvim_buf_set_lines(bufnr, 0, -1, false, lines) + vim.api.nvim_set_option_value('readonly', true, { buf = bufnr }) + vim.api.nvim_set_option_value('modified', false, { buf = bufnr }) + vim.api.nvim_set_option_value('modifiable', false, { buf = bufnr }) + lsp.buf_attach_client(bufnr, client.id) +end + +local function virtual_text_document(uri, client) + local params = { + textDocument = { + uri = uri, + }, + } + local result = client.request_sync('deno/virtualTextDocument', params) + virtual_text_document_handler(uri, result, client) +end + +local function denols_handler(err, result, ctx, config) + if not result or vim.tbl_isempty(result) then + return nil + end + + local client = vim.lsp.get_client_by_id(ctx.client_id) + for _, res in pairs(result) do + local uri = res.uri or res.targetUri + if uri:match '^deno:' then + virtual_text_document(uri, client) + res['uri'] = uri + res['targetUri'] = uri + end + end + + lsp.handlers[ctx.method](err, result, ctx, config) +end + +return { + default_config = { + cmd = { 'deno', 'lsp' }, + cmd_env = { NO_COLOR = true }, + filetypes = { + 'javascript', + 'javascriptreact', + 'javascript.jsx', + 'typescript', + 'typescriptreact', + 'typescript.tsx', + }, + root_dir = util.root_pattern('deno.json', 'deno.jsonc', '.git'), + settings = { + deno = { + enable = true, + suggest = { + imports = { + hosts = { + ['https://deno.land'] = true, + }, + }, + }, + }, + }, + handlers = { + ['textDocument/definition'] = denols_handler, + ['textDocument/typeDefinition'] = denols_handler, + ['textDocument/references'] = denols_handler, + }, + }, + commands = { + DenolsCache = { + function() + local clients = util.get_lsp_clients { bufnr = 0, name = 'denols' } + if #clients > 0 then + buf_cache(0, clients[#clients]) + end + end, + description = 'Cache a module and all of its dependencies.', + }, + }, + docs = { + description = [[ +https://github.com/denoland/deno + +Deno's built-in language server + +To appropriately highlight codefences returned from denols, you will need to augment vim.g.markdown_fenced languages + in your init.lua. Example: + +```lua +vim.g.markdown_fenced_languages = { + "ts=typescript" +} +``` + +]], + default_config = { + root_dir = [[root_pattern("deno.json", "deno.jsonc", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/dhall_lsp_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dhall_lsp_server.lua index af910f3..af910f3 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/dhall_lsp_server.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dhall_lsp_server.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/diagnosticls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/diagnosticls.lua index 8f0476b..6fdba0f 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/diagnosticls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/diagnosticls.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'diagnostic-languageserver' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'diagnostic-languageserver', '--stdio' }, root_dir = util.find_git_ancestor, single_file_support = true, filetypes = {}, diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/digestif.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/digestif.lua new file mode 100644 index 0000000..f89ba63 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/digestif.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'digestif' }, + filetypes = { 'tex', 'plaintex', 'context' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/astoff/digestif + +Digestif is a code analyzer, and a language server, for LaTeX, ConTeXt et caterva. It provides + +context-sensitive completion, documentation, code navigation, and related functionality to any + +text editor that speaks the LSP protocol. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/docker_compose_language_service.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/docker_compose_language_service.lua new file mode 100644 index 0000000..9a92297 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/docker_compose_language_service.lua @@ -0,0 +1,27 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'docker-compose-langserver', '--stdio' }, + filetypes = { 'yaml.docker-compose' }, + root_dir = util.root_pattern('docker-compose.yaml', 'docker-compose.yml', 'compose.yaml', 'compose.yml'), + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/microsoft/compose-language-service +This project contains a language service for Docker Compose. + +`compose-language-service` can be installed via `npm`: + +```sh +npm install @microsoft/compose-language-service +``` + +Note: If the docker-compose-langserver doesn't startup when entering a `docker-compose.yaml` file, make sure that the filetype is `yaml.docker-compose`. You can set with: `:set filetype=yaml.docker-compose`. +]], + default_config = { + root_dir = [[root_pattern("docker-compose.yaml", "docker-compose.yml", "compose.yaml", "compose.yml")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/dockerls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dockerls.lua index 6d1cfc7..dde050b 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/dockerls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dockerls.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'docker-langserver' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'docker-langserver', '--stdio' }, filetypes = { 'dockerfile' }, root_dir = util.root_pattern 'Dockerfile', single_file_support = true, @@ -22,6 +15,21 @@ https://github.com/rcjsuen/dockerfile-language-server-nodejs ```sh npm install -g dockerfile-language-server-nodejs ``` + +Additional configuration can be applied in the following way: +```lua +require("lspconfig").dockerls.setup { + settings = { + docker = { + languageserver = { + formatter = { + ignoreMultilineInstructions = true, + }, + }, + } + } +} +``` ]], default_config = { root_dir = [[root_pattern("Dockerfile")]], diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dolmenls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dolmenls.lua new file mode 100644 index 0000000..1f0657e --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dolmenls.lua @@ -0,0 +1,20 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'dolmenls' }, + filetypes = { 'smt2', 'tptp', 'p', 'cnf', 'icnf', 'zf' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/Gbury/dolmen/blob/master/doc/lsp.md + +`dolmenls` can be installed via `opam` +```sh +opam install dolmen_lsp +``` + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/dotls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dotls.lua index dff14b9..479f430 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/dotls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dotls.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'dot-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'dot-language-server', '--stdio' }, filetypes = { 'dot' }, root_dir = util.find_git_ancestor, single_file_support = true, diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dprint.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dprint.lua new file mode 100644 index 0000000..7ef0fad --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/dprint.lua @@ -0,0 +1,33 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'dprint', 'lsp' }, + filetypes = { + 'javascript', + 'javascriptreact', + 'typescript', + 'typescriptreact', + 'json', + 'jsonc', + 'markdown', + 'python', + 'toml', + 'rust', + 'roslyn', + }, + root_dir = util.root_pattern('dprint.json', '.dprint.json', 'dprint.jsonc', '.dprint.jsonc'), + single_file_support = true, + settings = {}, + }, + docs = { + description = [[ +https://github.com/dprint/dprint + +Pluggable and configurable code formatting platform written in Rust. + ]], + default_config = { + root_dir = util.root_pattern('dprint.json', '.dprint.json', 'dprint.jsonc', '.dprint.jsonc'), + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/drools_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/drools_lsp.lua new file mode 100644 index 0000000..d5dd3cc --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/drools_lsp.lua @@ -0,0 +1,81 @@ +local util = require 'lspconfig.util' + +local function get_java_bin(config) + local java_bin = vim.tbl_get(config, 'drools', 'java', 'bin') + if not java_bin then + java_bin = vim.env.JAVA_HOME and util.path.join(vim.env.JAVA_HOME, 'bin', 'java') or 'java' + if vim.fn.has 'win32' == 1 then + java_bin = java_bin .. '.exe' + end + end + return java_bin +end + +local function get_java_opts(config) + local java_opts = vim.tbl_get(config, 'drools', 'java', 'opts') + return java_opts and java_opts or {} +end + +local function get_jar(config) + local jar = vim.tbl_get(config, 'drools', 'jar') + return jar and jar or 'drools-lsp-server-jar-with-dependencies.jar' +end + +local function get_cmd(config) + local cmd = vim.tbl_get(config, 'cmd') + if not cmd then + cmd = { get_java_bin(config) } + for _, o in ipairs(get_java_opts(config)) do + table.insert(cmd, o) + end + ---@diagnostic disable-next-line:missing-parameter + vim.list_extend(cmd, { '-jar', get_jar(config) }) + end + return cmd +end + +return { + default_config = { + filetypes = { 'drools' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + on_new_config = function(new_config) + new_config.cmd = get_cmd(new_config) + end, + }, + docs = { + description = [=[ +https://github.com/kiegroup/drools-lsp + +Language server for the [Drools Rule Language (DRL)](https://docs.drools.org/latest/drools-docs/docs-website/drools/language-reference/#con-drl_drl-rules). + +The `drools-lsp` server is a self-contained java jar file (`drools-lsp-server-jar-with-dependencies.jar`), and can be downloaded from [https://github.com/kiegroup/drools-lsp/releases/](https://github.com/kiegroup/drools-lsp/releases/). + +Configuration information: +```lua +-- Option 1) Specify the entire command: +require('lspconfig').drools_lsp.setup { + cmd = { '/path/to/java', '-jar', '/path/to/drools-lsp-server-jar-with-dependencies.jar' }, +} + +-- Option 2) Specify just the jar path (the JAVA_HOME environment variable will be respected if present): +require('lspconfig').drools_lsp.setup { + drools = { jar = '/path/to/drools-lsp-server-jar-with-dependencies.jar' }, +} + +-- Option 3) Specify the java bin and/or java opts in addition to the jar path: +require('lspconfig').drools_lsp.setup { + drools = { + java = { bin = '/path/to/java', opts = { '-Xmx100m' } }, + jar = '/path/to/drools-lsp-server-jar-with-dependencies.jar', + }, +} +``` + +Neovim does not yet have automatic detection for the `drools` filetype, but it can be added with: +```lua +vim.cmd [[ autocmd BufNewFile,BufRead *.drl set filetype=drools ]] +``` +]=], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ds_pinyin_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ds_pinyin_lsp.lua new file mode 100644 index 0000000..bc1d7ac --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ds_pinyin_lsp.lua @@ -0,0 +1,80 @@ +local util = require 'lspconfig.util' + +local bin_name = 'ds-pinyin-lsp' +if vim.fn.has 'win32' == 1 then + bin_name = bin_name .. '.exe' +end + +local function ds_pinyin_lsp_off(bufnr) + bufnr = util.validate_bufnr(bufnr) + local ds_pinyin_lsp_client = util.get_active_client_by_name(bufnr, 'ds_pinyin_lsp') + if ds_pinyin_lsp_client then + ds_pinyin_lsp_client.notify('$/turn/completion', { + ['completion_on'] = false, + }) + else + vim.notify 'notification $/turn/completion is not supported by any servers active on the current buffer' + end +end + +local function ds_pinyin_lsp_on(bufnr) + bufnr = util.validate_bufnr(bufnr) + local ds_pinyin_lsp_client = util.get_active_client_by_name(bufnr, 'ds_pinyin_lsp') + if ds_pinyin_lsp_client then + ds_pinyin_lsp_client.notify('$/turn/completion', { + ['completion_on'] = true, + }) + else + vim.notify 'notification $/turn/completion is not supported by any servers active on the current buffer' + end +end + +return { + default_config = { + cmd = { bin_name }, + filetypes = { 'markdown', 'org' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + init_options = { + completion_on = true, + show_symbols = true, + show_symbols_only_follow_by_hanzi = false, + show_symbols_by_n_times = 0, + match_as_same_as_input = true, + match_long_input = true, + max_suggest = 15, + }, + }, + commands = { + DsPinyinCompletionOff = { + function() + ds_pinyin_lsp_off(0) + end, + description = 'Turn off the ds-pinyin-lsp completion', + }, + DsPinyinCompletionOn = { + function() + ds_pinyin_lsp_on(0) + end, + description = 'Turn on the ds-pinyin-lsp completion', + }, + }, + docs = { + description = [=[ +https://github.com/iamcco/ds-pinyin-lsp +Dead simple Pinyin language server for input Chinese without IME(input method). +To install, download the latest [release](https://github.com/iamcco/ds-pinyin-lsp/releases) and ensure `ds-pinyin-lsp` is on your path. +And make ensure the database file `dict.db3` is also downloaded. And put the path to `dict.dbs` in the following code. + +```lua + +require('lspconfig').ds_pinyin_lsp.setup { + init_options = { + db_path = "your_path_to_database" + } +} + +``` +]=], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/earthlyls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/earthlyls.lua new file mode 100644 index 0000000..5b843eb --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/earthlyls.lua @@ -0,0 +1,16 @@ +local util = require 'lspconfig/util' + +return { + default_config = { + cmd = { 'earthlyls' }, + filetypes = { 'earthfile' }, + root_dir = util.root_pattern 'Earthfile', + }, + docs = { + description = [[ +https://github.com/glehmann/earthlyls + +A fast language server for earthly. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ecsact.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ecsact.lua new file mode 100644 index 0000000..e8eaa98 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ecsact.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'ecsact_lsp_server', '--stdio' }, + filetypes = { 'ecsact' }, + root_dir = util.root_pattern '.git', + single_file_support = true, + }, + + docs = { + description = [[ +https://github.com/ecsact-dev/ecsact_lsp_server + +Language server for Ecsact. + +The default cmd assumes `ecsact_lsp_server` is in your PATH. Typically from the +Ecsact SDK: https://ecsact.dev/start +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/efm.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/efm.lua index f5f74ed..f5f74ed 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/efm.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/efm.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/elixirls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/elixirls.lua index d51aa50..3172f6a 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/elixirls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/elixirls.lua @@ -1,11 +1,14 @@ -local util = require 'lspconfig.util' - return { default_config = { - filetypes = { 'elixir', 'eelixir' }, + filetypes = { 'elixir', 'eelixir', 'heex', 'surface' }, root_dir = function(fname) - return util.root_pattern('mix.exs', '.git')(fname) or vim.loop.os_homedir() + local matches = vim.fs.find({ 'mix.exs' }, { upward = true, limit = 2, path = fname }) + local child_or_root_path, maybe_umbrella_path = unpack(matches) + local root_dir = vim.fs.dirname(maybe_umbrella_path or child_or_root_path) + + return root_dir end, + single_file_support = true, }, docs = { description = [[ @@ -31,9 +34,11 @@ require'lspconfig'.elixirls.setup{ ... } ``` + +'root_dir' is chosen like this: if two or more directories containing `mix.exs` were found when searching directories upward, the second one (higher up) is chosen, with the assumption that it is the root of an umbrella app. Otherwise the directory containing the single mix.exs that was found is chosen. ]], default_config = { - root_dir = [[root_pattern("mix.exs", ".git") or vim.loop.os_homedir()]], + root_dir = '{{see description above}}', }, }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/elmls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/elmls.lua index 2718c88..f42449d 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/elmls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/elmls.lua @@ -2,20 +2,13 @@ local util = require 'lspconfig.util' local lsp = vim.lsp local api = vim.api -local bin_name = 'elm-language-server' -local cmd = { bin_name } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name } -end - local default_capabilities = lsp.protocol.make_client_capabilities() default_capabilities.offsetEncoding = { 'utf-8', 'utf-16' } local elm_root_pattern = util.root_pattern 'elm.json' return { default_config = { - cmd = cmd, + cmd = { 'elm-language-server' }, -- TODO(ashkan) if we comment this out, it will allow elmls to operate on elm.json. It seems like it could do that, but no other editor allows it right now. filetypes = { 'elm' }, root_dir = function(fname) @@ -25,7 +18,10 @@ return { end end, init_options = { - elmAnalyseTrigger = 'change', + elmReviewDiagnostics = 'off', -- 'off' | 'warning' | 'error' + skipInstallPackageConfirmation = false, + disableElmLSDiagnostics = false, + onlyUpdateDiagnosticsOnSave = false, }, }, docs = { diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/elp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/elp.lua new file mode 100644 index 0000000..00678a5 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/elp.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'elp', 'server' }, + filetypes = { 'erlang' }, + root_dir = util.root_pattern('rebar.config', 'erlang.mk', '.git'), + single_file_support = true, + }, + docs = { + description = [[ +https://whatsapp.github.io/erlang-language-platform + +ELP integrates Erlang into modern IDEs via the language server protocol and was +inspired by rust-analyzer. +]], + default_config = { + root_dir = [[root_pattern('rebar.config', 'erlang.mk', '.git')]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ember.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ember.lua index e6ce1ea..7702bd7 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ember.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ember.lua @@ -1,26 +1,19 @@ local util = require 'lspconfig.util' -local bin_name = 'ember-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, - filetypes = { 'handlebars', 'typescript', 'javascript' }, + cmd = { 'ember-language-server', '--stdio' }, + filetypes = { 'handlebars', 'typescript', 'javascript', 'typescript.glimmer', 'javascript.glimmer' }, root_dir = util.root_pattern('ember-cli-build.js', '.git'), }, docs = { description = [[ -https://github.com/lifeart/ember-language-server +https://github.com/ember-tooling/ember-language-server `ember-language-server` can be installed via `npm`: ```sh -npm install -g @lifeart/ember-language-server +npm install -g @ember-tooling/ember-language-server ``` ]], default_config = { diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/emmet_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/emmet_language_server.lua new file mode 100644 index 0000000..8673dca --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/emmet_language_server.lua @@ -0,0 +1,35 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'emmet-language-server', '--stdio' }, + filetypes = { + 'css', + 'eruby', + 'html', + 'htmldjango', + 'javascriptreact', + 'less', + 'pug', + 'sass', + 'scss', + 'typescriptreact', + }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/olrtg/emmet-language-server + +Package can be installed via `npm`: +```sh +npm install -g @olrtg/emmet-language-server +``` +]], + default_config = { + root_dir = 'git root', + single_file_support = true, + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/emmet_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/emmet_ls.lua index 3750ae5..171bd56 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/emmet_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/emmet_ls.lua @@ -1,16 +1,23 @@ local util = require 'lspconfig.util' -local bin_name = 'emmet-ls' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, - filetypes = { 'html', 'css' }, + cmd = { 'emmet-ls', '--stdio' }, + filetypes = { + 'astro', + 'css', + 'eruby', + 'html', + 'htmldjango', + 'javascriptreact', + 'less', + 'pug', + 'sass', + 'scss', + 'svelte', + 'typescriptreact', + 'vue', + }, root_dir = util.find_git_ancestor, single_file_support = true, }, diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/erg_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/erg_language_server.lua new file mode 100644 index 0000000..9b198a8 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/erg_language_server.lua @@ -0,0 +1,27 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'erg', '--language-server' }, + filetypes = { 'erg' }, + root_dir = function(fname) + return util.root_pattern 'package.er'(fname) or util.find_git_ancestor(fname) + end, + }, + docs = { + description = [[ +https://github.com/erg-lang/erg#flags ELS + +ELS (erg-language-server) is a language server for the Erg programming language. + +erg-language-server can be installed via `cargo` and used as follows: + ```sh + cargo install erg --features els + erg --language-server + ``` + ]], + default_config = { + root_dir = [[root_pattern("package.er") or find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/erlangls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/erlangls.lua index cec1928..e2467f2 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/erlangls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/erlangls.lua @@ -1,13 +1,8 @@ local util = require 'lspconfig.util' -local cmd = { 'erlang_ls' } -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', 'erlang_ls.cmd' } -end - return { default_config = { - cmd = cmd, + cmd = { 'erlang_ls' }, filetypes = { 'erlang' }, root_dir = util.root_pattern('rebar.config', 'erlang.mk', '.git'), single_file_support = true, diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/esbonio.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/esbonio.lua index a97c26b..ff13473 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/esbonio.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/esbonio.lua @@ -49,7 +49,7 @@ require'lspconfig'.esbonio.setup { } ``` -A full list and explanation of the available options can be found [here](https://swyddfa.github.io/esbonio/docs/lsp/editors/index.html) +A full list and explanation of the available options can be found [here](https://docs.esbon.io/en/esbonio-language-server-v0.16.4/lsp/getting-started.html?editor=neovim-lspconfig#configuration) ]], }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/eslint.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/eslint.lua index 925cdfe..c52f827 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/eslint.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/eslint.lua @@ -1,20 +1,10 @@ local util = require 'lspconfig.util' local lsp = vim.lsp -local get_eslint_client = function() - local active_clients = lsp.get_active_clients() - for _, client in ipairs(active_clients) do - if client.name == 'eslint' then - return client - end - end - return nil -end - local function fix_all(opts) opts = opts or {} - local eslint_lsp_client = get_eslint_client() + local eslint_lsp_client = util.get_active_client_by_name(opts.bufnr, 'eslint') if eslint_lsp_client == nil then return end @@ -42,16 +32,24 @@ local function fix_all(opts) }) end -local bin_name = 'vscode-eslint-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end +local root_file = { + '.eslintrc', + '.eslintrc.js', + '.eslintrc.cjs', + '.eslintrc.yaml', + '.eslintrc.yml', + '.eslintrc.json', + 'eslint.config.js', + 'eslint.config.mjs', + 'eslint.config.cjs', + 'eslint.config.ts', + 'eslint.config.mts', + 'eslint.config.cts', +} return { default_config = { - cmd = cmd, + cmd = { 'vscode-eslint-language-server', '--stdio' }, filetypes = { 'javascript', 'javascriptreact', @@ -60,21 +58,22 @@ return { 'typescriptreact', 'typescript.tsx', 'vue', + 'svelte', + 'astro', }, -- https://eslint.org/docs/user-guide/configuring/configuration-files#configuration-file-formats - root_dir = util.root_pattern( - '.eslintrc.js', - '.eslintrc.cjs', - '.eslintrc.yaml', - '.eslintrc.yml', - '.eslintrc.json', - 'package.json' - ), + root_dir = function(fname) + root_file = util.insert_package_json(root_file, 'eslintConfig', fname) + return util.root_pattern(unpack(root_file))(fname) + end, -- Refer to https://github.com/Microsoft/vscode-eslint#settings-options for documentation. settings = { validate = 'on', - packageManager = 'npm', + packageManager = nil, useESLintClass = false, + experimental = { + useFlatConfig = false, + }, codeActionOnSave = { enable = false, mode = 'all', @@ -84,6 +83,9 @@ return { onIgnoredFiles = 'off', rulesCustomizations = {}, run = 'onType', + problems = { + shortenToSingleLine = false, + }, -- nodePath configures the directory in which the eslint server should start its node_modules resolution. -- This path is relative to the workspace folder (root dir) of the server instance. nodePath = '', @@ -107,6 +109,25 @@ return { uri = new_root_dir, name = vim.fn.fnamemodify(new_root_dir, ':t'), } + + -- Support flat config + if + vim.fn.filereadable(new_root_dir .. '/eslint.config.js') == 1 + or vim.fn.filereadable(new_root_dir .. '/eslint.config.mjs') == 1 + or vim.fn.filereadable(new_root_dir .. '/eslint.config.cjs') == 1 + or vim.fn.filereadable(new_root_dir .. '/eslint.config.ts') == 1 + or vim.fn.filereadable(new_root_dir .. '/eslint.config.mts') == 1 + or vim.fn.filereadable(new_root_dir .. '/eslint.config.cts') == 1 + then + config.settings.experimental.useFlatConfig = true + end + + -- Support Yarn2 (PnP) projects + local pnp_cjs = util.path.join(new_root_dir, '.pnp.cjs') + local pnp_js = util.path.join(new_root_dir, '.pnp.js') + if util.path.exists(pnp_cjs) or util.path.exists(pnp_js) then + config.cmd = vim.list_extend({ 'yarn', 'exec' }, config.cmd) + end end, handlers = { ['eslint/openDoc'] = function(_, result) @@ -151,22 +172,31 @@ return { description = [[ https://github.com/hrsh7th/vscode-langservers-extracted -vscode-eslint-language-server: A linting engine for JavaScript / Typescript +`vscode-eslint-language-server` is a linting engine for JavaScript / Typescript. +It can be installed via `npm`: -`vscode-eslint-language-server` can be installed via `npm`: ```sh npm i -g vscode-langservers-extracted ``` -vscode-eslint-language-server provides an EslintFixAll command that can be used to format document on save -```vim -autocmd BufWritePre *.tsx,*.ts,*.jsx,*.js EslintFixAll +`vscode-eslint-language-server` provides an `EslintFixAll` command that can be used to format a document on save: +```lua +lspconfig.eslint.setup({ + --- ... + on_attach = function(client, bufnr) + vim.api.nvim_create_autocmd("BufWritePre", { + buffer = bufnr, + command = "EslintFixAll", + }) + end, +}) ``` See [vscode-eslint](https://github.com/microsoft/vscode-eslint/blob/55871979d7af184bf09af491b6ea35ebd56822cf/server/src/eslintServer.ts#L216-L229) for configuration options. -Additional messages you can handle: eslint/noConfig -Messages already handled in lspconfig: eslint/openDoc, eslint/confirmESLintExecution, eslint/probeFailed, eslint/noLibrary +Messages handled in lspconfig: `eslint/openDoc`, `eslint/confirmESLintExecution`, `eslint/probeFailed`, `eslint/noLibrary` + +Additional messages you can handle: `eslint/noConfig` ]], }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/facility_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/facility_language_server.lua new file mode 100644 index 0000000..c37069d --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/facility_language_server.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'facility-language-server' }, + filetypes = { 'fsd' }, + single_file_support = true, + root_dir = util.find_git_ancestor, + }, + docs = { + description = [[ +https://github.com/FacilityApi/FacilityLanguageServer + +Facility language server protocol (LSP) support. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fennel_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fennel_language_server.lua new file mode 100644 index 0000000..919b544 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fennel_language_server.lua @@ -0,0 +1,18 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'fennel-language-server' }, + filetypes = { 'fennel' }, + single_file_support = true, + root_dir = util.find_git_ancestor, + settings = {}, + }, + docs = { + description = [[ +https://github.com/rydesun/fennel-language-server + +Fennel language server protocol (LSP) support. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fennel_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fennel_ls.lua new file mode 100644 index 0000000..50a7739 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fennel_ls.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +local default_capabilities = vim.lsp.protocol.make_client_capabilities() +default_capabilities.offsetEncoding = { 'utf-8', 'utf-16' } + +return { + default_config = { + cmd = { 'fennel-ls' }, + filetypes = { 'fennel' }, + root_dir = function(dir) + return util.find_git_ancestor(dir) + end, + settings = {}, + capabilities = default_capabilities, + }, + docs = { + description = [[ +https://sr.ht/~xerool/fennel-ls/ + +A language server for fennel. +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/flow.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/flow.lua index 3ac59aa..3ac59aa 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/flow.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/flow.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/flux_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/flux_lsp.lua index 3be9a1b..3be9a1b 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/flux_lsp.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/flux_lsp.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/foam_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/foam_ls.lua index 1f0d7fc..1a991b6 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/foam_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/foam_ls.lua @@ -1,14 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'foam-ls' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end return { default_config = { - cmd = cmd, + cmd = { 'foam-ls', '--stdio' }, filetypes = { 'foam', 'OpenFOAM' }, root_dir = function(fname) return util.search_ancestors(fname, function(path) diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fortls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fortls.lua new file mode 100644 index 0000000..41a0005 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fortls.lua @@ -0,0 +1,36 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { + 'fortls', + '--notify_init', + '--hover_signature', + '--hover_language=fortran', + '--use_signature_help', + }, + filetypes = { 'fortran' }, + root_dir = function(fname) + return util.root_pattern '.fortls'(fname) or util.find_git_ancestor(fname) + end, + settings = {}, + }, + docs = { + description = [[ +https://github.com/gnikit/fortls + +fortls is a Fortran Language Server, the server can be installed via pip + +```sh +pip install fortls +``` + +Settings to the server can be passed either through the `cmd` option or through +a local configuration file e.g. `.fortls`. For more information +see the `fortls` [documentation](https://gnikit.github.io/fortls/options.html). + ]], + default_config = { + root_dir = [[root_pattern(".fortls")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/fsautocomplete.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fsautocomplete.lua index 1a1d4c5..4858c04 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/fsautocomplete.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fsautocomplete.lua @@ -2,7 +2,7 @@ local util = require 'lspconfig.util' return { default_config = { - cmd = { 'fsautocomplete', '--background-service-enabled' }, + cmd = { 'fsautocomplete', '--adaptive-lsp-server-enabled' }, root_dir = util.root_pattern('*.sln', '*.fsproj', '.git'), filetypes = { 'fsharp' }, init_options = { diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fsharp_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fsharp_language_server.lua new file mode 100644 index 0000000..1abc606 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fsharp_language_server.lua @@ -0,0 +1,29 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'dotnet', 'FSharpLanguageServer.dll' }, + root_dir = util.root_pattern('*.sln', '*.fsproj', '.git'), + filetypes = { 'fsharp' }, + init_options = { + AutomaticWorkspaceInit = true, + }, + settings = {}, + }, + docs = { + description = [[ +F# Language Server +https://github.com/faldor20/fsharp-language-server + +An implementation of the language server protocol using the F# Compiler Service. + +Build the project from source and override the command path to location of DLL. + +If filetype determination is not already performed by an available plugin ([PhilT/vim-fsharp](https://github.com/PhilT/vim-fsharp), [fsharp/vim-fsharp](https://github.com/fsharp/vim-fsharp), and [adelarsq/neofsharp.vim](https://github.com/adelarsq/neofsharp.vim). +), then the following must be added to initialization configuration: + + +`autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp` +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/fstar.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fstar.lua index d866c54..d866c54 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/fstar.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/fstar.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/futhark_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/futhark_lsp.lua new file mode 100644 index 0000000..2521cc1 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/futhark_lsp.lua @@ -0,0 +1,22 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'futhark', 'lsp' }, + filetypes = { 'futhark', 'fut' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/diku-dk/futhark + +Futhark Language Server + +This language server comes with the futhark compiler and is run with the command +``` +futhark lsp +``` +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/gdscript.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gdscript.lua index d6d697f..5ae1799 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/gdscript.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gdscript.lua @@ -1,8 +1,15 @@ local util = require 'lspconfig.util' +local port = os.getenv 'GDScript_Port' or '6005' +local cmd = { 'nc', 'localhost', port } + +if vim.fn.has 'nvim-0.8' == 1 then + cmd = vim.lsp.rpc.connect('127.0.0.1', port) +end + return { default_config = { - cmd = { 'nc', 'localhost', '6008' }, + cmd = cmd, filetypes = { 'gd', 'gdscript', 'gdscript3' }, root_dir = util.root_pattern('project.godot', '.git'), }, diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gdshader_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gdshader_lsp.lua new file mode 100644 index 0000000..a01efa8 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gdshader_lsp.lua @@ -0,0 +1,16 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'gdshader-lsp', '--stdio' }, + filetypes = { 'gdshader', 'gdshaderinc' }, + root_dir = util.root_pattern 'project.godot', + }, + docs = { + description = [[ +https://github.com/godofavacyn/gdshader-lsp + +A language server for the Godot Shading language. +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ghcide.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ghcide.lua index 7f9307b..7f9307b 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ghcide.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ghcide.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ghdl_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ghdl_ls.lua new file mode 100644 index 0000000..0f9e118 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ghdl_ls.lua @@ -0,0 +1,22 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'ghdl-ls' }, + filetypes = { 'vhdl' }, + root_dir = function(fname) + return util.root_pattern 'hdl-prj.json'(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/ghdl/ghdl-language-server + +A language server for VHDL, using ghdl as its backend. + +`ghdl-ls` is part of pyghdl, for installation instructions see +[the upstream README](https://github.com/ghdl/ghdl/tree/master/pyGHDL/lsp). +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ginko_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ginko_ls.lua new file mode 100644 index 0000000..61f9de6 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ginko_ls.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'ginko_ls' }, + filetypes = { 'dts' }, + root_dir = util.find_git_ancestor, + settings = {}, + }, + docs = { + description = [[ +`ginko_ls` is meant to be a feature-complete language server for device-trees. +Language servers can be used in many editors, such as Visual Studio Code, Emacs +or Vim + +Install `ginko_ls` from https://github.com/Schottkyc137/ginko and add it to path + +`ginko_ls` doesn't require any configuration. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gitlab_ci_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gitlab_ci_ls.lua new file mode 100644 index 0000000..f9d8402 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gitlab_ci_ls.lua @@ -0,0 +1,33 @@ +local util = require 'lspconfig.util' + +local cache_dir = util.path.join(vim.loop.os_homedir(), '.cache/gitlab-ci-ls/') +return { + default_config = { + cmd = { 'gitlab-ci-ls' }, + filetypes = { 'yaml.gitlab' }, + root_dir = util.root_pattern('.gitlab*', '.git'), + init_options = { + cache_path = cache_dir, + log_path = util.path.join(cache_dir, 'log/gitlab-ci-ls.log'), + }, + }, + docs = { + description = [[ +https://github.com/alesbrelih/gitlab-ci-ls + +Language Server for Gitlab CI + +`gitlab-ci-ls` can be installed via cargo: +cargo install gitlab-ci-ls +]], + default_config = { + cmd = { 'gitlab-ci-ls' }, + filetypes = { 'yaml.gitlab' }, + root_dir = [[util.root_pattern('.gitlab*', '.git')]], + init_options = { + cache_path = [[util.path.join(vim.loop.os_homedir(), '.cache/gitlab-ci-ls/')]], + log_path = [[util.path.join(util.path.join(vim.loop.os_homedir(), '.cache/gitlab-ci-ls/'), 'log/gitlab-ci-ls.log')]], + }, + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gleam.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gleam.lua new file mode 100644 index 0000000..ec5504c --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gleam.lua @@ -0,0 +1,25 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'gleam', 'lsp' }, + filetypes = { 'gleam' }, + root_dir = function(fname) + return util.root_pattern('gleam.toml', '.git')(fname) + end, + }, + docs = { + description = [[ +https://github.com/gleam-lang/gleam + +A language server for Gleam Programming Language. +[Installation](https://gleam.run/getting-started/installing/) + +It can be i +]], + default_config = { + cmd = { 'gleam', 'lsp' }, + root_dir = [[root_pattern("gleam.toml", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/glint.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/glint.lua new file mode 100644 index 0000000..1d991cf --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/glint.lua @@ -0,0 +1,59 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'glint-language-server' }, + on_new_config = function(config, new_root_dir) + local project_root = util.find_node_modules_ancestor(new_root_dir) + -- Glint should not be installed globally. + local node_bin_path = util.path.join(project_root, 'node_modules', '.bin') + local path = node_bin_path .. util.path.path_separator .. vim.env.PATH + if config.cmd_env then + config.cmd_env.PATH = path + else + config.cmd_env = { PATH = path } + end + end, + filetypes = { + 'html.handlebars', + 'handlebars', + 'typescript', + 'typescript.glimmer', + 'javascript', + 'javascript.glimmer', + }, + root_dir = util.root_pattern( + '.glintrc.yml', + '.glintrc', + '.glintrc.json', + '.glintrc.js', + 'glint.config.js', + 'package.json' + ), + }, + docs = { + description = [[ + https://github.com/typed-ember/glint + + https://typed-ember.gitbook.io/glint/ + + `glint-language-server` is installed when adding `@glint/core` to your project's devDependencies: + + ```sh + npm install @glint/core --save-dev + ``` + + or + + ```sh + yarn add -D @glint/core + ``` + + or + + ```sh + pnpm add -D @glint/core + ``` +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/glsl_analyzer.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/glsl_analyzer.lua new file mode 100644 index 0000000..74ffbba --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/glsl_analyzer.lua @@ -0,0 +1,18 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'glsl_analyzer' }, + filetypes = { 'glsl', 'vert', 'tesc', 'tese', 'frag', 'geom', 'comp' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + capabilities = {}, + }, + docs = { + description = [[ +https://github.com/nolanderc/glsl_analyzer + +Language server for GLSL + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/glslls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/glslls.lua new file mode 100644 index 0000000..7d1c363 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/glslls.lua @@ -0,0 +1,28 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'glslls', '--stdin' }, + filetypes = { 'glsl', 'vert', 'tesc', 'tese', 'frag', 'geom', 'comp' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + capabilities = { + textDocument = { + completion = { + editsNearCursor = true, + }, + }, + offsetEncoding = { 'utf-8', 'utf-16' }, + }, + }, + docs = { + description = [[ +https://github.com/svenstaro/glsl-language-server + +Language server implementation for GLSL + +`glslls` can be compiled and installed manually, or, if your distribution has access to the AUR, +via the `glsl-language-server` AUR package + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/golangci_lint_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/golangci_lint_ls.lua index 8eaa015..b1b51c4 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/golangci_lint_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/golangci_lint_ls.lua @@ -8,7 +8,15 @@ return { command = { 'golangci-lint', 'run', '--out-format', 'json' }, }, root_dir = function(fname) - return util.root_pattern 'go.work'(fname) or util.root_pattern('go.mod', '.golangci.yaml', '.git')(fname) + return util.root_pattern( + '.golangci.yml', + '.golangci.yaml', + '.golangci.toml', + '.golangci.json', + 'go.work', + 'go.mod', + '.git' + )(fname) end, }, docs = { @@ -23,12 +31,12 @@ Installation of binaries needed is done via ``` go install github.com/nametake/golangci-lint-langserver@latest -go install github.com/golangci/golangci-lint/cmd/golangci-lint@v1.42.1 +go install github.com/golangci/golangci-lint/cmd/golangci-lint@latest ``` ]], default_config = { - root_dir = [[root_pattern('go.work') or root_pattern('go.mod', '.golangci.yaml', '.git')]], + root_dir = [[root_pattern('.golangci.yml', '.golangci.yaml', '.golangci.toml', '.golangci.json', 'go.work', 'go.mod', '.git')]], }, }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gopls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gopls.lua new file mode 100644 index 0000000..aceb38d --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gopls.lua @@ -0,0 +1,37 @@ +local util = require 'lspconfig.util' +local async = require 'lspconfig.async' +local mod_cache = nil + +return { + default_config = { + cmd = { 'gopls' }, + filetypes = { 'go', 'gomod', 'gowork', 'gotmpl' }, + root_dir = function(fname) + -- see: https://github.com/neovim/nvim-lspconfig/issues/804 + if not mod_cache then + local result = async.run_command { 'go', 'env', 'GOMODCACHE' } + if result and result[1] then + mod_cache = vim.trim(result[1]) + end + end + if fname:sub(1, #mod_cache) == mod_cache then + local clients = util.get_lsp_clients { name = 'gopls' } + if #clients > 0 then + return clients[#clients].config.root_dir + end + end + return util.root_pattern('go.work', 'go.mod', '.git')(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/golang/tools/tree/master/gopls + +Google's lsp server for golang. +]], + default_config = { + root_dir = [[root_pattern("go.work", "go.mod", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/gradle_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gradle_ls.lua index b23b599..6af1ee6 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/gradle_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/gradle_ls.lua @@ -7,19 +7,20 @@ end local root_files = { 'settings.gradle', -- Gradle (multi-project) -} - -local fallback_root_files = { 'build.gradle', -- Gradle } return { default_config = { filetypes = { 'groovy' }, - root_dir = function(fname) - return util.root_pattern(unpack(root_files))(fname) or util.root_pattern(unpack(fallback_root_files))(fname) - end, + root_dir = util.root_pattern(unpack(root_files)), cmd = { bin_name }, + -- gradle-language-server expects init_options.settings to be defined + init_options = { + settings = { + gradleWrapperEnabled = true, + }, + }, }, docs = { description = [[ @@ -30,8 +31,13 @@ Microsoft's lsp server for gradle files If you're setting this up manually, build vscode-gradle using `./gradlew installDist` and point `cmd` to the `gradle-language-server` generated in the build directory ]], default_config = { - root_dir = [[root_pattern("settings.gradle")]], + root_dir = [[root_pattern("settings.gradle", "build.gradle")]], cmd = { 'gradle-language-server' }, + init_options = { + settings = { + gradleWrapperEnabled = true, + }, + }, }, }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/grammarly.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/grammarly.lua index 675169d..6b37a14 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/grammarly.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/grammarly.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'unofficial-grammarly-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'grammarly-languageserver', '--stdio' }, filetypes = { 'markdown' }, root_dir = util.find_git_ancestor, single_file_support = true, @@ -18,15 +11,18 @@ return { return '' end, }, + init_options = { + clientId = 'client_BaDkMgx4X19X9UxxYRCXZo', + }, }, docs = { description = [[ -https://github.com/emacs-grammarly/unofficial-grammarly-language-server +https://github.com/znck/grammarly -`unofficial-grammarly-language-server` can be installed via `npm`: +`grammarly-languageserver` can be installed via `npm`: ```sh -npm i -g @emacs-grammarly/unofficial-grammarly-language-server +npm i -g grammarly-languageserver ``` WARNING: Since this language server uses Grammarly's API, any document you open with it running is shared with them. Please evaluate their [privacy policy](https://www.grammarly.com/privacy-policy) before using this. diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/graphql.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/graphql.lua new file mode 100644 index 0000000..fa1e871 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/graphql.lua @@ -0,0 +1,26 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'graphql-lsp', 'server', '-m', 'stream' }, + filetypes = { 'graphql', 'typescriptreact', 'javascriptreact' }, + root_dir = util.root_pattern('.graphqlrc*', '.graphql.config.*', 'graphql.config.*'), + }, + + docs = { + description = [[ +https://github.com/graphql/graphiql/tree/main/packages/graphql-language-service-cli + +`graphql-lsp` can be installed via `npm`: + +```sh +npm install -g graphql-language-service-cli +``` + +Note that you must also have [the graphql package](https://github.com/graphql/graphql-js) installed within your project and create a [GraphQL config file](https://the-guild.dev/graphql/config/docs). +]], + default_config = { + root_dir = [[util.root_pattern('.git', '.graphqlrc*', '.graphql.config.*', 'graphql.config.*')]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/groovyls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/groovyls.lua index b4182f4..b4182f4 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/groovyls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/groovyls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/guile_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/guile_ls.lua new file mode 100644 index 0000000..41b44ed --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/guile_ls.lua @@ -0,0 +1,30 @@ +local util = require 'lspconfig.util' +return { + default_config = { + cmd = { 'guile-lsp-server' }, + filetypes = { + 'scheme.guile', + }, + root_dir = function(fname) + return util.root_pattern 'guix.scm'(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://codeberg.org/rgherdt/scheme-lsp-server + +The recommended way is to install guile-lsp-server is using Guix. Unfortunately it is still not available at the official Guix channels, but you can use the provided channel guix.scm in the repo: +```sh +guix package -f guix.scm +``` + +Checkout the repo for more info. + +Note: This LSP will start on `scheme.guile` filetype. You can set this file type using `:help modeline` or adding https://gitlab.com/HiPhish/guile.vim to your plugins to automatically set it. + ]], + default_config = { + root_dir = [[root_pattern("guix.scm", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/harper_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/harper_ls.lua new file mode 100644 index 0000000..0a989a6 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/harper_ls.lua @@ -0,0 +1,48 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'harper-ls', '--stdio' }, + filetypes = { + 'markdown', + 'rust', + 'typescript', + 'typescriptreact', + 'javascript', + 'python', + 'go', + 'c', + 'cpp', + 'ruby', + 'swift', + 'csharp', + 'toml', + 'lua', + }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/chilipepperhott/harper + +The language server for Harper, the slim, clean language checker for developers. + +See [docs](https://github.com/chilipepperhott/harper/tree/master/harper-ls#configuration) for more information on settings. + +In short, however, they should look something like this: +```lua +lspconfig.harper_ls.setup { + settings = { + ["harper-ls"] = { + userDictPath = "~/dict.txt" + } + }, +} +``` + ]], + default_config = { + root_dir = [[bufdir]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/haxe_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/haxe_language_server.lua index 1589c7b..1589c7b 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/haxe_language_server.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/haxe_language_server.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/hdl_checker.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hdl_checker.lua index 5cf2941..5cf2941 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/hdl_checker.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hdl_checker.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/helm_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/helm_ls.lua new file mode 100644 index 0000000..4908e23 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/helm_ls.lua @@ -0,0 +1,36 @@ +local util = require 'lspconfig.util' + +local default_capabilities = { + workspace = { + didChangeWatchedFiles = { + dynamicRegistration = true, + }, + }, +} + +return { + default_config = { + cmd = { 'helm_ls', 'serve' }, + filetypes = { 'helm' }, + root_dir = util.root_pattern 'Chart.yaml', + single_file_support = true, + capabilities = default_capabilities, + }, + docs = { + description = [[ +https://github.com/mrjosh/helm-ls + +Helm Language server. (This LSP is in early development) + +`helm Language server` can be installed by following the instructions [here](https://github.com/mrjosh/helm-ls). + +The default `cmd` assumes that the `helm_ls` binary can be found in `$PATH`. + +If need Helm file highlight use [vim-helm](https://github.com/towolf/vim-helm) plugin. +]], + default_config = { + root_dir = [[root_pattern("Chart.yaml")]], + capabilities = [[default capabilities, with dynamicRegistration for didChangeWatchedFiles true]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/hhvm.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hhvm.lua index 0e8ac5c..0e8ac5c 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/hhvm.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hhvm.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/hie.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hie.lua index 96148ad..96148ad 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/hie.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hie.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hlasm.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hlasm.lua new file mode 100644 index 0000000..285b627 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hlasm.lua @@ -0,0 +1,20 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'hlasm_language_server' }, + filetypes = { 'hlasm' }, + root_dir = util.root_pattern '.hlasmplugin', + single_file_support = true, + }, + docs = { + description = [[ + `hlasm_language_server` is a language server for the High Level Assembler language used on IBM SystemZ mainframes. + + To learn how to configure the HLASM language server, see the [HLASM Language Support documentation](https://github.com/eclipse-che4z/che-che4z-lsp-for-hlasm). + ]], + default_config = { + root_dir = [[root_pattern(".hlasmplugin")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/hls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hls.lua index 32b3ea2..4390440 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/hls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hls.lua @@ -4,11 +4,12 @@ return { default_config = { cmd = { 'haskell-language-server-wrapper', '--lsp' }, filetypes = { 'haskell', 'lhaskell' }, - root_dir = util.root_pattern('*.cabal', 'stack.yaml', 'cabal.project', 'package.yaml', 'hie.yaml'), + root_dir = util.root_pattern('hie.yaml', 'stack.yaml', 'cabal.project', '*.cabal', 'package.yaml'), single_file_support = true, settings = { haskell = { formattingProvider = 'ormolu', + cabalFormattingProvider = 'cabalfmt', }, }, lspinfo = function(cfg) @@ -34,10 +35,18 @@ return { https://github.com/haskell/haskell-language-server Haskell Language Server - ]], + +If you are using HLS 1.9.0.0, enable the language server to launch on Cabal files as well: + +```lua +require('lspconfig')['hls'].setup{ + filetypes = { 'haskell', 'lhaskell', 'cabal' }, +} +``` + ]], default_config = { - root_dir = [[root_pattern("*.cabal", "stack.yaml", "cabal.project", "package.yaml", "hie.yaml")]], + root_dir = [[root_pattern("hie.yaml", "stack.yaml", "cabal.project", "*.cabal", "package.yaml")]], }, }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/hoon_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hoon_ls.lua index 80092db..1a9240b 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/hoon_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hoon_ls.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'hoon-language-server' -local cmd = { bin_name } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name } -end - return { default_config = { - cmd = cmd, + cmd = { 'hoon-language-server' }, filetypes = { 'hoon' }, root_dir = util.find_git_ancestor, single_file_support = true, diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/html.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/html.lua index 2f8214f..2370734 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/html.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/html.lua @@ -1,16 +1,9 @@ local util = require 'lspconfig.util' -local bin_name = 'vscode-html-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, - filetypes = { 'html' }, + cmd = { 'vscode-html-language-server', '--stdio' }, + filetypes = { 'html', 'templ' }, root_dir = util.root_pattern('package.json', '.git'), single_file_support = true, settings = {}, diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/htmx.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/htmx.lua new file mode 100644 index 0000000..26611b7 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/htmx.lua @@ -0,0 +1,24 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'htmx-lsp' }, + filetypes = { 'html', 'templ' }, + single_file_support = true, + root_dir = function(fname) + return util.find_git_ancestor(fname) + end, + }, + docs = { + description = [[ +https://github.com/ThePrimeagen/htmx-lsp + +`htmx-lsp` can be installed via `cargo`: +```sh +cargo install htmx-lsp +``` + +Lsp is still very much work in progress and experimental. Use at your own risk. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hydra_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hydra_lsp.lua new file mode 100644 index 0000000..e162ebe --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hydra_lsp.lua @@ -0,0 +1,20 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'hydra-lsp' }, + filetypes = { 'yaml' }, + root_dir = util.root_pattern '.git', + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/Retsediv/hydra-lsp + +LSP for Hydra Python package config files. +]], + default_config = { + root_dir = [[util.root_pattern '.git']], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hyprls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hyprls.lua new file mode 100644 index 0000000..1a29023 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/hyprls.lua @@ -0,0 +1,24 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'hyprls', '--stdio' }, + filetypes = { '*.hl', 'hypr*.conf', '.config/hypr/*.conf' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/hyprland-community/hyprls + +`hyprls` can be installed via `go`: +```sh +go install github.com/ewen-lbh/hyprls/cmd/hyprls@latest +``` + +]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/idris2_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/idris2_lsp.lua index d6efdd1..acb906e 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/idris2_lsp.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/idris2_lsp.lua @@ -19,7 +19,7 @@ experimental). Idris2-Lsp requires a build of Idris 2 that includes the "Idris 2 API" package. Package managers with known support for this build include the -[AUR](https://aur.archlinux.org/packages/idris2-api-git/) and +[AUR](https://aur.archlinux.org/packages/idris2/) and [Homebrew](https://formulae.brew.sh/formula/idris2#default). If your package manager does not support the Idris 2 API, you will need to build diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/intelephense.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/intelephense.lua index c9e35b9..2b9ad0f 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/intelephense.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/intelephense.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'intelephense' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'intelephense', '--stdio' }, filetypes = { 'php' }, root_dir = function(pattern) local cwd = vim.loop.cwd() diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/java_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/java_language_server.lua index 3ddf4b1..3ddf4b1 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/java_language_server.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/java_language_server.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/jdtls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jdtls.lua index d740572..62bf2a5 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/jdtls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jdtls.lua @@ -1,38 +1,35 @@ local util = require 'lspconfig.util' local handlers = require 'vim.lsp.handlers' -local sysname = vim.loop.os_uname().sysname local env = { HOME = vim.loop.os_homedir(), - JAVA_HOME = os.getenv 'JAVA_HOME', - JDTLS_HOME = os.getenv 'JDTLS_HOME', - WORKSPACE = os.getenv 'WORKSPACE', + XDG_CACHE_HOME = os.getenv 'XDG_CACHE_HOME', + JDTLS_JVM_ARGS = os.getenv 'JDTLS_JVM_ARGS', } -local function get_java_executable() - local executable = env.JAVA_HOME and util.path.join(env.JAVA_HOME, 'bin', 'java') or 'java' +local function get_cache_dir() + return env.XDG_CACHE_HOME and env.XDG_CACHE_HOME or util.path.join(env.HOME, '.cache') +end - return sysname:match 'Windows' and executable .. '.exe' or executable +local function get_jdtls_cache_dir() + return util.path.join(get_cache_dir(), 'jdtls') end -local function get_workspace_dir() - return env.WORKSPACE and env.WORKSPACE or util.path.join(env.HOME, 'workspace') +local function get_jdtls_config_dir() + return util.path.join(get_jdtls_cache_dir(), 'config') end -local function get_jdtls_jar() - return vim.fn.expand '$JDTLS_HOME/plugins/org.eclipse.equinox.launcher_*.jar' +local function get_jdtls_workspace_dir() + return util.path.join(get_jdtls_cache_dir(), 'workspace') end -local function get_jdtls_config() - if sysname:match 'Linux' then - return util.path.join(env.JDTLS_HOME, 'config_linux') - elseif sysname:match 'Darwin' then - return util.path.join(env.JDTLS_HOME, 'config_mac') - elseif sysname:match 'Windows' then - return util.path.join(env.JDTLS_HOME, 'config_win') - else - return util.path.join(env.JDTLS_HOME, 'config_linux') +local function get_jdtls_jvm_args() + local args = {} + for a in string.gmatch((env.JDTLS_JVM_ARGS or ''), '%S+') do + local arg = string.format('--jvm-arg=%s', a) + table.insert(args, arg) end + return unpack(args) end -- TextDocument version is reported as 0, override with nil so that @@ -80,6 +77,8 @@ local function on_language_status(_, result) end local root_files = { + -- Multi-module projects + { '.git', 'build.gradle', 'build.gradle.kts' }, -- Single-module projects { 'build.xml', -- Ant @@ -87,32 +86,17 @@ local root_files = { 'settings.gradle', -- Gradle 'settings.gradle.kts', -- Gradle }, - -- Multi-module projects - { 'build.gradle', 'build.gradle.kts' }, } return { default_config = { cmd = { - get_java_executable(), - '-Declipse.application=org.eclipse.jdt.ls.core.id1', - '-Dosgi.bundles.defaultStartLevel=4', - '-Declipse.product=org.eclipse.jdt.ls.core.product', - '-Dlog.protocol=true', - '-Dlog.level=ALL', - '-Xms1g', - '-Xmx2G', - '--add-modules=ALL-SYSTEM', - '--add-opens', - 'java.base/java.util=ALL-UNNAMED', - '--add-opens', - 'java.base/java.lang=ALL-UNNAMED', - '-jar', - get_jdtls_jar(), + 'jdtls', '-configuration', - get_jdtls_config(), + get_jdtls_config_dir(), '-data', - get_workspace_dir(), + get_jdtls_workspace_dir(), + get_jdtls_jvm_args(), }, filetypes = { 'java' }, root_dir = function(fname) @@ -125,7 +109,7 @@ return { end, single_file_support = true, init_options = { - workspace = get_workspace_dir(), + workspace = get_jdtls_workspace_dir(), jvm_args = {}, os_config = nil, }, @@ -150,25 +134,21 @@ you can keep reading here. For manual installation you can download precompiled binaries from the [official downloads site](http://download.eclipse.org/jdtls/snapshots/?d) +and ensure that the `PATH` variable contains the `bin` directory of the extracted archive. -Due to the nature of java, settings cannot be inferred. Please set the following -environmental variables to match your installation. If you need per-project configuration -[direnv](https://github.com/direnv/direnv) is highly recommended. - -```bash -# Mandatory: -# .bashrc -export JDTLS_HOME=/path/to/jdtls_root # Directory with the plugin and configs directories - -# Optional: -export JAVA_HOME=/path/to/java_home # In case you don't have java in path or want to use a version in particular -export WORKSPACE=/path/to/workspace # Defaults to $HOME/workspace -``` ```lua -- init.lua require'lspconfig'.jdtls.setup{} ``` +You can also pass extra custom jvm arguments with the JDTLS_JVM_ARGS environment variable as a space separated list of arguments, +that will be converted to multiple --jvm-arg=<param> args when passed to the jdtls script. This will allow for example tweaking +the jvm arguments or integration with external tools like lombok: + +```sh +export JDTLS_JVM_ARGS="-javaagent:$HOME/.local/share/java/lombok.jar" +``` + For automatic installation you can use the following unofficial installers/launchers under your own risk: - [jdtls-launcher](https://github.com/eruizc-dev/jdtls-launcher) (Includes lombok support by default) ```lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/jedi_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jedi_language_server.lua index 30cf8f5..c95c960 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/jedi_language_server.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jedi_language_server.lua @@ -6,6 +6,7 @@ local root_files = { 'setup.cfg', 'requirements.txt', 'Pipfile', + '.git', } return { diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jinja_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jinja_lsp.lua new file mode 100644 index 0000000..e372ee9 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jinja_lsp.lua @@ -0,0 +1,28 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + name = 'jinja_lsp', + cmd = { 'jinja-lsp' }, + filetypes = { 'jinja' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +jinja-lsp enhances minijinja development experience by providing Helix/Nvim users with advanced features such as autocomplete, syntax highlighting, hover, goto definition, code actions and linting. + +The file types are not detected automatically, you can register them manually (see below) or override the filetypes: + +```lua +vim.filetype.add { + extension = { + jinja = 'jinja', + jinja2 = 'jinja', + j2 = 'jinja', + }, +} +``` +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jqls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jqls.lua new file mode 100644 index 0000000..740138e --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jqls.lua @@ -0,0 +1,30 @@ +local util = require 'lspconfig.util' +return { + default_config = { + cmd = { 'jq-lsp' }, + filetypes = { 'jq' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/wader/jq-lsp +Language server for jq, written using Go. +You can install the server easily using go install: +```sh +# install directly +go install github.com/wader/jq-lsp@master +# copy binary to $PATH +cp $(go env GOPATH)/bin/jq-lsp /usr/local/bin +``` +Note: To activate properly nvim needs to know the jq filetype. +You can add it via: +```lua +vim.cmd(\[\[au BufRead,BufNewFile *.jq setfiletype jq\]\]) +``` +]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/jsonls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jsonls.lua index a62a715..b629959 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/jsonls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jsonls.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'vscode-json-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'vscode-json-language-server', '--stdio' }, filetypes = { 'json', 'jsonc' }, init_options = { provideFormatter = true, diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/jsonnet_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jsonnet_ls.lua index 3493e7e..e2e7bff 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/jsonnet_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/jsonnet_ls.lua @@ -13,13 +13,17 @@ return { default_config = { cmd = { 'jsonnet-language-server' }, filetypes = { 'jsonnet', 'libsonnet' }, + single_file_support = true, root_dir = function(fname) return util.root_pattern 'jsonnetfile.json'(fname) or util.find_git_ancestor(fname) end, on_new_config = function(new_config, root_dir) - new_config.cmd_env = { - JSONNET_PATH = jsonnet_path(root_dir), - } + if not new_config.cmd_env then + new_config.cmd_env = {} + end + if not new_config.cmd_env.JSONNET_PATH then + new_config.cmd_env.JSONNET_PATH = jsonnet_path(root_dir) + end end, }, docs = { diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/julials.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/julials.lua index 44360c7..44360c7 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/julials.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/julials.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/koka.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/koka.lua new file mode 100644 index 0000000..63f3838 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/koka.lua @@ -0,0 +1,36 @@ +local util = require 'lspconfig.util' + +local root_files = {} + +local default_capabilities = { + textDocument = { + completion = { + editsNearCursor = true, + }, + }, + offsetEncoding = { 'utf-8' }, +} + +return { + default_config = { + cmd = { 'koka', '--language-server' }, + filetypes = { 'kk' }, + root_dir = function(fname) + return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + capabilities = default_capabilities, + }, + commands = {}, + docs = { + description = [[ + https://koka-lang.github.io/koka/doc/index.html +Koka is a functional programming language with effect types and handlers. + ]], + default_config = { + root_dir = [[ + ]], + capabilities = [[default capabilities, with offsetEncoding utf-8]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/kotlin_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/kotlin_language_server.lua index a955fe6..a151403 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/kotlin_language_server.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/kotlin_language_server.lua @@ -15,9 +15,6 @@ local root_files = { 'settings.gradle.kts', -- Gradle (multi-project) 'build.xml', -- Ant 'pom.xml', -- Maven -} - -local fallback_root_files = { 'build.gradle', -- Gradle 'build.gradle.kts', -- Gradle } @@ -25,10 +22,11 @@ local fallback_root_files = { return { default_config = { filetypes = { 'kotlin' }, - root_dir = function(fname) - return util.root_pattern(unpack(root_files))(fname) or util.root_pattern(unpack(fallback_root_files))(fname) - end, + root_dir = util.root_pattern(unpack(root_files)), cmd = { bin_name }, + init_options = { + storagePath = util.root_pattern(unpack(root_files))(vim.fn.expand '%:p:h'), + }, }, docs = { description = [[ @@ -44,28 +42,16 @@ return { You could refer for this capability to: https://github.com/udalov/kotlin-vim (recommended) Note that there is no LICENSE specified yet. + + For faster startup, you can setup caching by specifying a storagePath + in the init_options. The default is your home directory. ]], default_config = { - root_dir = [[root_pattern("settings.gradle")]], + root_dir = [[See source]], cmd = { 'kotlin-language-server' }, - capabilities = [[ - smart code completion, - diagnostics, - hover, - document symbols, - definition lookup, - method signature help, - dependency resolution, - additional plugins from: https://github.com/fwcd - - Snipped of License (refer to source for full License): - - The MIT License (MIT) - - Copyright (c) 2016 George Fraser - Copyright (c) 2018 fwcd - - ]], + init_options = { + storagePath = [[Enables caching and use project root to store cache data. See source]], + }, }, }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/lean3ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lean3ls.lua index b35a693..ebcec10 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/lean3ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lean3ls.lua @@ -1,16 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'lean-language-server' -local args = { '--stdio', '--', '-M', '4096', '-T', '100000' } -local cmd = { bin_name, unpack(args) } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, unpack(args) } -end - return { default_config = { - cmd = cmd, + cmd = { 'lean-language-server', '--stdio', '--', '-M', '4096', '-T', '100000' }, filetypes = { 'lean3' }, offset_encoding = 'utf-32', root_dir = function(fname) diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/leanls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/leanls.lua index 208598a..208598a 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/leanls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/leanls.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/lelwel_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lelwel_ls.lua index ac8c456..ac8c456 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/lelwel_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lelwel_ls.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/lemminx.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lemminx.lua index 5bcf1cf..eb1ccaa 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/lemminx.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lemminx.lua @@ -11,9 +11,9 @@ return { description = [[ https://github.com/eclipse/lemminx -The easiest way to install the server is to get a binary at https://download.jboss.org/jbosstools/vscode/stable/lemminx-binary/ and place it in your PATH. +The easiest way to install the server is to get a binary from https://github.com/redhat-developer/vscode-xml/releases and place it on your PATH. -NOTE to macOS users: Binaries from unidentified developers are blocked by default. If you trust the downloaded binary from jboss.org, run it once, cancel the prompt, then remove the binary from Gatekeeper quarantine with `xattr -d com.apple.quarantine lemminx`. It should now run without being blocked. +NOTE to macOS users: Binaries from unidentified developers are blocked by default. If you trust the downloaded binary, run it once, cancel the prompt, then remove the binary from Gatekeeper quarantine with `xattr -d com.apple.quarantine lemminx`. It should now run without being blocked. ]], default_config = { diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lexical.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lexical.lua new file mode 100644 index 0000000..d8235d5 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lexical.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + filetypes = { 'elixir', 'eelixir', 'heex', 'surface' }, + root_dir = function(fname) + return util.root_pattern 'mix.exs'(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ + https://github.com/lexical-lsp/lexical + + Lexical is a next-generation language server for the Elixir programming language. + + Follow the [Detailed Installation Instructions](https://github.com/lexical-lsp/lexical/blob/main/pages/installation.md) + + **By default, `lexical` doesn't have a `cmd` set.** + This is because nvim-lspconfig does not make assumptions about your path. + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ltex.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ltex.lua new file mode 100644 index 0000000..6afc30a --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ltex.lua @@ -0,0 +1,95 @@ +local util = require 'lspconfig.util' + +local language_id_mapping = { + bib = 'bibtex', + plaintex = 'tex', + rnoweb = 'rsweave', + rst = 'restructuredtext', + tex = 'latex', + pandoc = 'markdown', + text = 'plaintext', +} + +local bin_name = 'ltex-ls' +if vim.fn.has 'win32' == 1 then + bin_name = bin_name .. '.bat' +end + +local filetypes = { + 'bib', + 'gitcommit', + 'markdown', + 'org', + 'plaintex', + 'rst', + 'rnoweb', + 'tex', + 'pandoc', + 'quarto', + 'rmd', + 'context', + 'html', + 'xhtml', + 'mail', + 'text', +} + +local function get_language_id(_, filetype) + local language_id = language_id_mapping[filetype] + if language_id then + return language_id + else + return filetype + end +end +local enabled_ids = {} +do + local enabled_keys = {} + for _, ft in ipairs(filetypes) do + local id = get_language_id({}, ft) + if not enabled_keys[id] then + enabled_keys[id] = true + table.insert(enabled_ids, id) + end + end +end + +return { + default_config = { + cmd = { bin_name }, + filetypes = filetypes, + root_dir = util.find_git_ancestor, + single_file_support = true, + get_language_id = get_language_id, + settings = { + ltex = { + enabled = enabled_ids, + }, + }, + }, + docs = { + description = [=[ +https://github.com/valentjn/ltex-ls + +LTeX Language Server: LSP language server for LanguageTool 🔍✔️ with support for LaTeX 🎓, Markdown 📝, and others + +To install, download the latest [release](https://github.com/valentjn/ltex-ls/releases) and ensure `ltex-ls` is on your path. + +This server accepts configuration via the `settings` key. + +```lua + settings = { + ltex = { + language = "en-GB", + }, + }, +``` + +To support org files or R sweave, users can define a custom filetype autocommand (or use a plugin which defines these filetypes): + +```lua +vim.cmd [[ autocmd BufRead,BufNewFile *.org set filetype=org ]] +``` +]=], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lua_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lua_ls.lua new file mode 100644 index 0000000..3bb9fd6 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lua_ls.lua @@ -0,0 +1,88 @@ +local util = require 'lspconfig.util' + +local root_files = { + '.luarc.json', + '.luarc.jsonc', + '.luacheckrc', + '.stylua.toml', + 'stylua.toml', + 'selene.toml', + 'selene.yml', +} + +return { + default_config = { + cmd = { 'lua-language-server' }, + filetypes = { 'lua' }, + root_dir = function(fname) + local root = util.root_pattern(unpack(root_files))(fname) + if root and root ~= vim.env.HOME then + return root + end + root = util.root_pattern 'lua/'(fname) + if root then + return root + end + return util.find_git_ancestor(fname) + end, + single_file_support = true, + log_level = vim.lsp.protocol.MessageType.Warning, + }, + docs = { + description = [[ +https://github.com/luals/lua-language-server + +Lua language server. + +`lua-language-server` can be installed by following the instructions [here](https://luals.github.io/#neovim-install). + +The default `cmd` assumes that the `lua-language-server` binary can be found in `$PATH`. + +If you primarily use `lua-language-server` for Neovim, and want to provide completions, +analysis, and location handling for plugins on runtime path, you can use the following +settings. + +```lua +require'lspconfig'.lua_ls.setup { + on_init = function(client) + local path = client.workspace_folders[1].name + if vim.loop.fs_stat(path..'/.luarc.json') or vim.loop.fs_stat(path..'/.luarc.jsonc') then + return + end + + client.config.settings.Lua = vim.tbl_deep_extend('force', client.config.settings.Lua, { + runtime = { + -- Tell the language server which version of Lua you're using + -- (most likely LuaJIT in the case of Neovim) + version = 'LuaJIT' + }, + -- Make the server aware of Neovim runtime files + workspace = { + checkThirdParty = false, + library = { + vim.env.VIMRUNTIME + -- Depending on the usage, you might want to add additional paths here. + -- "${3rd}/luv/library" + -- "${3rd}/busted/library", + } + -- or pull in all of 'runtimepath'. NOTE: this is a lot slower + -- library = vim.api.nvim_get_runtime_file("", true) + } + }) + end, + settings = { + Lua = {} + } +} +``` + +See `lua-language-server`'s [documentation](https://luals.github.io/wiki/settings/) for an explanation of the above fields: +* [Lua.runtime.path](https://luals.github.io/wiki/settings/#runtimepath) +* [Lua.workspace.library](https://luals.github.io/wiki/settings/#workspacelibrary) + +]], + default_config = { + root_dir = [[root_pattern(".luarc.json", ".luarc.jsonc", ".luacheckrc", ".stylua.toml", "stylua.toml", "selene.toml", "selene.yml", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/luau_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/luau_lsp.lua new file mode 100644 index 0000000..c916114 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/luau_lsp.lua @@ -0,0 +1,27 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'luau-lsp', 'lsp' }, + filetypes = { 'luau' }, + root_dir = util.find_git_ancestor, + }, + docs = { + [[ +https://github.com/JohnnyMorganz/luau-lsp + +Language server for the [Luau](https://luau-lang.org/) language. + +`luau-lsp` can be installed by downloading one of the release assets available at https://github.com/JohnnyMorganz/luau-lsp. + +You might also have to set up automatic filetype detection for Luau files, for example like so: + +```vim +autocmd BufRead,BufNewFile *.luau setf luau +``` +]], + default_config = { + root_dir = [[root_pattern(".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lwc_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lwc_ls.lua new file mode 100644 index 0000000..ac8841a --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/lwc_ls.lua @@ -0,0 +1,37 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'lwc-language-server', '--stdio' }, + filetypes = { 'javascript', 'html' }, + root_dir = util.root_pattern 'sfdx-project.json', + init_options = { + embeddedLanguages = { + javascript = true, + }, + }, + }, + docs = { + description = [[ +https://github.com/forcedotcom/lightning-language-server/ + +Language server for Lightning Web Components. + +For manual installation, utilize the official [NPM package](https://www.npmjs.com/package/@salesforce/lwc-language-server). +Then, configure `cmd` to run the Node script at the unpacked location: + +```lua +require'lspconfig'.lwc_ls.setup { + cmd = { + 'node', + '/path/to/node_modules/@salesforce/lwc-language-server/bin/lwc-language-server.js', + '--stdio' + } +} +``` +]], + default_config = { + root_dir = [[root_pattern('sfdx-project.json')]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/m68k.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/m68k.lua new file mode 100644 index 0000000..053d442 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/m68k.lua @@ -0,0 +1,29 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'm68k-lsp-server', '--stdio' }, + filetypes = { 'asm68k' }, + root_dir = util.root_pattern('Makefile', '.git'), + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/grahambates/m68k-lsp + +Language server for Motorola 68000 family assembly + +`m68k-lsp-server` can be installed via `npm`: + +```sh +npm install -g m68k-lsp-server +``` + +Ensure you are using the 68k asm syntax variant in Neovim. + +```lua +vim.g.asmsyntax = 'asm68k' +``` +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/markdown_oxide.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/markdown_oxide.lua new file mode 100644 index 0000000..13882dc --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/markdown_oxide.lua @@ -0,0 +1,42 @@ +return { + default_config = { + root_dir = function(fname, _) + return require('lspconfig').util.root_pattern('.git', '.obsidian', '.moxide.toml')(fname) + end, + filetypes = { 'markdown' }, + single_file_support = true, + cmd = { 'markdown-oxide' }, + }, + docs = { + description = [[ +https://github.com/Feel-ix-343/markdown-oxide + +Editor Agnostic PKM: you bring the text editor and we +bring the PKM. + +Inspired by and compatible with Obsidian. + +Check the readme to see how to properly setup. + ]], + }, + commands = { + Today = { + function() + vim.lsp.buf.execute_command { command = 'jump', arguments = { 'today' } } + end, + description = "Open today's daily note", + }, + Tomorrow = { + function() + vim.lsp.buf.execute_command { command = 'jump', arguments = { 'tomorrow' } } + end, + description = "Open tomorrow's daily note", + }, + Yesterday = { + function() + vim.lsp.buf.execute_command { command = 'jump', arguments = { 'yesterday' } } + end, + description = "Open yesterday's daily note", + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/marksman.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/marksman.lua new file mode 100644 index 0000000..2dd01a2 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/marksman.lua @@ -0,0 +1,30 @@ +local util = require 'lspconfig.util' + +local bin_name = 'marksman' +local cmd = { bin_name, 'server' } + +return { + default_config = { + cmd = cmd, + filetypes = { 'markdown', 'markdown.mdx' }, + root_dir = function(fname) + local root_files = { '.marksman.toml' } + return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/artempyanykh/marksman + +Marksman is a Markdown LSP server providing completion, cross-references, diagnostics, and more. + +Marksman works on MacOS, Linux, and Windows and is distributed as a self-contained binary for each OS. + +Pre-built binaries can be downloaded from https://github.com/artempyanykh/marksman/releases +]], + default_config = { + root_dir = [[root_pattern(".git", ".marksman.toml")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/matlab_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/matlab_ls.lua new file mode 100644 index 0000000..cadc60b --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/matlab_ls.lua @@ -0,0 +1,25 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'matlab-language-server', '--stdio' }, + filetypes = { 'matlab' }, + root_dir = util.find_git_ancestor, + single_file_support = false, + settings = { + MATLAB = { + indexWorkspace = false, + installPath = '', + matlabConnectionTiming = 'onStart', + telemetry = true, + }, + }, + }, + docs = { + description = [[ +https://github.com/mathworks/MATLAB-language-server + +MATLAB® language server implements the Microsoft® Language Server Protocol for the MATLAB language. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mdx_analyzer.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mdx_analyzer.lua new file mode 100644 index 0000000..1dfbcb5 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mdx_analyzer.lua @@ -0,0 +1,32 @@ +local util = require 'lspconfig.util' + +local function get_typescript_server_path(root_dir) + local project_root = util.find_node_modules_ancestor(root_dir) + return project_root and (util.path.join(project_root, 'node_modules', 'typescript', 'lib')) or '' +end + +return { + default_config = { + cmd = { 'mdx-language-server', '--stdio' }, + filetypes = { 'markdown.mdx' }, + root_dir = util.root_pattern 'package.json', + single_file_support = true, + settings = {}, + init_options = { + typescript = {}, + }, + on_new_config = function(new_config, new_root_dir) + if vim.tbl_get(new_config.init_options, 'typescript') and not new_config.init_options.typescript.tsdk then + new_config.init_options.typescript.tsdk = get_typescript_server_path(new_root_dir) + end + end, + }, + commands = {}, + docs = { + description = [[ +https://github.com/mdx-js/mdx-analyzer + +`mdx-analyzer`, a language server for MDX +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mesonlsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mesonlsp.lua new file mode 100644 index 0000000..29eaef9 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mesonlsp.lua @@ -0,0 +1,19 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'mesonlsp', '--lsp' }, + filetypes = { 'meson' }, + root_dir = util.root_pattern('meson_options.txt', 'meson.options', '.git'), + }, + docs = { + description = [[ +https://github.com/JCWasmx86/mesonlsp + +An unofficial, unendorsed language server for meson written in C++ +]], + default_config = { + root_dir = [[util.root_pattern("meson_options.txt", "meson.options", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/metals.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/metals.lua index b05db5c..1242f51 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/metals.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/metals.lua @@ -13,6 +13,11 @@ return { snippetAutoIndent = false, }, }, + capabilities = { + workspace = { + configuration = false, + }, + }, }, docs = { description = [[ @@ -22,21 +27,11 @@ Scala language server with rich IDE features. See full instructions in the Metals documentation: -https://scalameta.org/metals/docs/editors/vim.html#using-an-alternative-lsp-client +https://scalameta.org/metals/docs/editors/vim#using-an-alternative-lsp-client Note: that if you're using [nvim-metals](https://github.com/scalameta/nvim-metals), that plugin fully handles the setup and installation of Metals, and you shouldn't set up Metals both with it and `lspconfig`. -To install Metals, make sure to have [coursier](https://get-coursier.io/docs/cli-installation) installed, and once you do you can install the latest Metals with `cs install metals`. You can also manually bootstrap Metals with the following command. - -```bash -cs bootstrap \ - --java-opt -Xss4m \ - --java-opt -Xms100m \ - org.scalameta:metals_2.12:<enter-version-here> \ - -r bintray:scalacenter/releases \ - -r sonatype:snapshots \ - -o /usr/local/bin/metals -f -``` +To install Metals, make sure to have [coursier](https://get-coursier.io/docs/cli-installation) installed, and once you do you can install the latest Metals with `cs install metals`. ]], default_config = { root_dir = [[util.root_pattern("build.sbt", "build.sc", "build.gradle", "pom.xml")]], diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/millet.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/millet.lua new file mode 100644 index 0000000..e870054 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/millet.lua @@ -0,0 +1,24 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'millet' }, + filetypes = { 'sml' }, + root_dir = util.root_pattern 'millet.toml', + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/azdavis/millet + +Millet, a language server for Standard ML + +To use with nvim: + +1. Install a Rust toolchain: https://rustup.rs +2. Clone the repo +3. Run `cargo build --release --bin lang-srv` +4. Move `target/release/lang-srv` to somewhere on your $PATH as `millet` + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/mint.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mint.lua index 7fde1c4..7fde1c4 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/mint.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mint.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mlir_lsp_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mlir_lsp_server.lua new file mode 100644 index 0000000..22a7126 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mlir_lsp_server.lua @@ -0,0 +1,19 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'mlir-lsp-server' }, + filetypes = { 'mlir' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://mlir.llvm.org/docs/Tools/MLIRLSP/#mlir-lsp-language-server--mlir-lsp-server= + +The Language Server for the LLVM MLIR language + +`mlir-lsp-server` can be installed at the llvm-project repository (https://github.com/llvm/llvm-project) +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mlir_pdll_lsp_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mlir_pdll_lsp_server.lua new file mode 100644 index 0000000..e24d634 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mlir_pdll_lsp_server.lua @@ -0,0 +1,20 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'mlir-pdll-lsp-server' }, + filetypes = { 'pdll' }, + root_dir = function(fname) + return util.root_pattern 'pdll_compile_commands.yml'(fname) or util.find_git_ancestor(fname) + end, + }, + docs = { + description = [[ +https://mlir.llvm.org/docs/Tools/MLIRLSP/#pdll-lsp-language-server--mlir-pdll-lsp-server + +The Language Server for the LLVM PDLL language + +`mlir-pdll-lsp-server` can be installed at the llvm-project repository (https://github.com/llvm/llvm-project) +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/mm0_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mm0_ls.lua index 513bbeb..513bbeb 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/mm0_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mm0_ls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mojo.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mojo.lua new file mode 100644 index 0000000..9092ba6 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mojo.lua @@ -0,0 +1,22 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'mojo-lsp-server' }, + filetypes = { 'mojo' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/modularml/mojo + +`mojo-lsp-server` can be installed [via Modular](https://developer.modular.com/download) + +Mojo is a new programming language that bridges the gap between research and production by combining Python syntax and ecosystem with systems programming and metaprogramming features. +]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/motoko_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/motoko_lsp.lua new file mode 100644 index 0000000..c0f6a35 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/motoko_lsp.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'motoko-lsp', '--stdio' }, + filetypes = { 'motoko' }, + root_dir = util.root_pattern('dfx.json', '.git'), + init_options = { + formatter = 'auto', + }, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/dfinity/vscode-motoko + +Language server for the Motoko programming language. + ]], + default_config = { + root_dir = [[root_pattern("dfx.json", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/move_analyzer.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/move_analyzer.lua new file mode 100644 index 0000000..ab97745 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/move_analyzer.lua @@ -0,0 +1,31 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'move-analyzer' }, + filetypes = { 'move' }, + root_dir = function(fname) + local move_package_dir = util.root_pattern 'Move.toml'(fname) + return move_package_dir + end, + }, + commands = {}, + docs = { + description = [[ +https://github.com/move-language/move/tree/main/language/move-analyzer + +Language server for Move + +The `move-analyzer` can be installed by running: + +``` +cargo install --git https://github.com/move-language/move move-analyzer +``` + +See [`move-analyzer`'s doc](https://github.com/move-language/move/blob/1b258a06e3c7d2bc9174578aac92cca3ac19de71/language/move-analyzer/editors/code/README.md#how-to-install) for details. + ]], + default_config = { + root_dir = [[root_pattern("Move.toml")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mutt_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mutt_ls.lua new file mode 100644 index 0000000..2026bf9 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/mutt_ls.lua @@ -0,0 +1,25 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'mutt-language-server' }, + filetypes = { 'muttrc', 'neomuttrc' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + settings = {}, + }, + docs = { + description = [[ +https://github.com/neomutt/mutt-language-server + +A language server for (neo)mutt's muttrc. It can be installed via pip. + +```sh +pip install mutt-language-server +``` + ]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nelua_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nelua_lsp.lua new file mode 100644 index 0000000..ab5faab --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nelua_lsp.lua @@ -0,0 +1,36 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + filetypes = { 'nelua' }, + root_dir = util.root_pattern('Makefile', '.git', '*.nelua'), + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/codehz/nelua-lsp + +nelua-lsp is an experimental nelua language server. + +You need [nelua.vim](https://github.com/stefanos82/nelua.vim/blob/main/ftdetect/nelua.vim) for nelua files to be recognized or add this to your config: + +in vimscript: +```vimscript +au BufNewFile,BufRead *.nelua setf nelua +``` + +in lua: +```lua +vim.api.nvim_create_autocmd({ "BufNewFile", "BufRead" }, { pattern = { "*.nelua" }, command = "setf nelua"}) +``` + +**By default, nelua-lsp doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. + +```lua +require'lspconfig'.nelua_lsp.setup { + cmd = { "nelua", "-L", "/path/to/nelua-lsp/", "--script", "/path/to/nelua-lsp/nelua-lsp.lua" }, +} +``` +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/neocmake.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/neocmake.lua new file mode 100644 index 0000000..3839bdb --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/neocmake.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +local root_files = { '.git', 'build', 'cmake' } +return { + default_config = { + cmd = { 'neocmakelsp', '--stdio' }, + filetypes = { 'cmake' }, + root_dir = function(fname) + return util.root_pattern(unpack(root_files))(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/Decodetalkers/neocmakelsp + +CMake LSP Implementation +]], + default_config = { + root_dir = [[root_pattern('.git', 'cmake')]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nextls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nextls.lua new file mode 100644 index 0000000..acecaf7 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nextls.lua @@ -0,0 +1,18 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + filetypes = { 'elixir', 'eelixir', 'heex', 'surface' }, + root_dir = function(fname) + return util.root_pattern 'mix.exs'(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/elixir-tools/next-ls + +**By default, next-ls does not set its `cmd`. Please see the following [detailed instructions](https://www.elixir-tools.dev/docs/next-ls/installation/) for possible installation methods.** +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nginx_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nginx_language_server.lua new file mode 100644 index 0000000..9dfc0b5 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nginx_language_server.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'nginx-language-server' }, + filetypes = { 'nginx' }, + root_dir = function(fname) + return util.root_pattern('nginx.conf', '.git')(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://pypi.org/project/nginx-language-server/ + +`nginx-language-server` can be installed via pip: + +```sh +pip install -U nginx-language-server +``` + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/nickel_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nickel_ls.lua index 3a9387e..391abfe 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/nickel_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nickel_ls.lua @@ -30,7 +30,7 @@ cd nickel/lsp/nls cargo install --path . ``` -In order to have lspconfig detect Nickel filetypes (a prequisite for autostarting a server), +In order to have lspconfig detect Nickel filetypes (a prerequisite for autostarting a server), install the [Nickel vim plugin](https://github.com/nickel-lang/vim-nickel). ]], }, diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nil_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nil_ls.lua new file mode 100644 index 0000000..49044c1 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nil_ls.lua @@ -0,0 +1,25 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'nil' }, + filetypes = { 'nix' }, + single_file_support = true, + root_dir = util.root_pattern('flake.nix', '.git'), + }, + docs = { + description = [[ +https://github.com/oxalica/nil + +A new language server for Nix Expression Language. + +If you are using Nix with Flakes support, run `nix profile install github:oxalica/nil` to install. +Check the repository README for more information. + +_See an example config at https://github.com/oxalica/nil/blob/main/dev/nvim-lsp.nix._ + ]], + default_config = { + root_dir = [[root_pattern("flake.nix", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nim_langserver.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nim_langserver.lua new file mode 100644 index 0000000..f3c4827 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nim_langserver.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'nimlangserver' }, + filetypes = { 'nim' }, + root_dir = function(fname) + return util.root_pattern '*.nimble'(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/nim-lang/langserver + + +`nim-langserver` can be installed via the `nimble` package manager: +```sh +nimble install nimlangserver +``` + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/nimls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nimls.lua index f10b002..3c1aeb2 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/nimls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nimls.lua @@ -12,7 +12,9 @@ return { docs = { description = [[ https://github.com/PMunch/nimlsp + `nimlsp` can be installed via the `nimble` package manager: + ```sh nimble install nimlsp ``` diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nixd.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nixd.lua new file mode 100644 index 0000000..b6289db --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nixd.lua @@ -0,0 +1,25 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'nixd' }, + filetypes = { 'nix' }, + single_file_support = true, + root_dir = function(fname) + return util.root_pattern 'flake.nix'(fname) or util.find_git_ancestor(fname) + end, + }, + docs = { + description = [[ +https://github.com/nix-community/nixd + +Nix language server, based on nix libraries. + +If you are using Nix with Flakes support, run `nix profile install github:nix-community/nixd` to install. +Check the repository README for more information. + ]], + default_config = { + root_dir = [[root_pattern("flake.nix",".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nomad_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nomad_lsp.lua new file mode 100644 index 0000000..5ffa98a --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nomad_lsp.lua @@ -0,0 +1,36 @@ +local util = require 'lspconfig.util' +local bin_name = 'nomad-lsp' + +if vim.fn.has 'win32' == 1 then + bin_name = bin_name .. '.exe' +end + +return { + default_config = { + cmd = { bin_name }, + filetypes = { 'hcl.nomad', 'nomad' }, + root_dir = util.root_pattern '*.nomad', + }, + docs = { + description = [[ +https://github.com/juliosueiras/nomad-lsp + +Written in Go, compilation is needed for `nomad_lsp` to be used. Please see the [original repository](https://github.com/juliosuieras/nomad-lsp). + +Add the executable to your system or vim PATH and it will be set to go. + +No configuration option is needed unless you choose not to add `nomad-lsp` executable to the PATH. You should know what you are doing if you choose so. + +```lua +require('lspconfig').nomad_lsp.setup{ } +``` + +However, a `hcl.nomad` or `nomad` filetype should be defined. + +Description of your jobs should be written in `.nomad` files for the LSP client to configure the server's `root_dir` configuration option. +]], + default_config = { + root_dir = [[util.root_pattern("hcl.nomad", "nomad")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ntt.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ntt.lua new file mode 100644 index 0000000..0f68a89 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ntt.lua @@ -0,0 +1,28 @@ +local util = require 'lspconfig.util' +local bin_name = 'ntt' + +return { + default_config = { + cmd = { bin_name, 'langserver' }, + filetypes = { 'ttcn' }, + root_dir = util.root_pattern '.git', + }, + docs = { + description = [[ +https://github.com/nokia/ntt +Installation instructions can be found [here](https://github.com/nokia/ntt#Install). +Can be configured by passing a "settings" object to `ntt.setup{}`: +```lua +require('lspconfig').ntt.setup{ + settings = { + ntt = { + } + } +} +``` +]], + default_config = { + root_dir = [[util.root_pattern(".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nushell.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nushell.lua new file mode 100644 index 0000000..13bd34e --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nushell.lua @@ -0,0 +1,20 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'nu', '--lsp' }, + filetypes = { 'nu' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/nushell/nushell + +Nushell built-in language server. +]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nxls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nxls.lua new file mode 100644 index 0000000..e3d3874 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/nxls.lua @@ -0,0 +1,24 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'nxls', '--stdio' }, + filetypes = { 'json', 'jsonc' }, + root_dir = util.root_pattern('nx.json', '.git'), + }, + docs = { + description = [[ +https://github.com/nrwl/nx-console/tree/master/apps/nxls + +nxls, a language server for Nx Workspaces + +`nxls` can be installed via `npm`: +```sh +npm i -g nxls +``` +]], + default_config = { + root_dir = [[util.root_pattern]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ocamlls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ocamlls.lua index fcc25db..8526f3e 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ocamlls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ocamlls.lua @@ -1,14 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'ocaml-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end return { default_config = { - cmd = cmd, + cmd = { 'ocaml-language-server', '--stdio' }, filetypes = { 'ocaml', 'reason' }, root_dir = util.root_pattern('*.opam', 'esy.json', 'package.json'), }, diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ocamllsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ocamllsp.lua index 1528471..4f33c9a 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ocamllsp.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ocamllsp.lua @@ -6,6 +6,7 @@ local language_id_of = { ocamlinterface = 'ocaml.interface', ocamllex = 'ocaml.ocamllex', reason = 'reason', + dune = 'dune', } local get_language_id = function(_, ftype) @@ -15,8 +16,8 @@ end return { default_config = { cmd = { 'ocamllsp' }, - filetypes = { 'ocaml', 'ocaml.menhir', 'ocaml.interface', 'ocaml.ocamllex', 'reason' }, - root_dir = util.root_pattern('*.opam', 'esy.json', 'package.json', '.git'), + filetypes = { 'ocaml', 'menhir', 'ocamlinterface', 'ocamllex', 'reason', 'dune' }, + root_dir = util.root_pattern('*.opam', 'esy.json', 'package.json', '.git', 'dune-project', 'dune-workspace'), get_language_id = get_language_id, }, docs = { @@ -27,12 +28,11 @@ https://github.com/ocaml/ocaml-lsp To install the lsp server in a particular opam switch: ```sh -opam pin add ocaml-lsp-server https://github.com/ocaml/ocaml-lsp.git opam install ocaml-lsp-server ``` ]], default_config = { - root_dir = [[root_pattern("*.opam", "esy.json", "package.json", ".git")]], + root_dir = [[root_pattern("*.opam", "esy.json", "package.json", ".git", "dune-project", "dune-workspace")]], }, }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ols.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ols.lua index 65dd085..6b890f6 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/ols.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ols.lua @@ -4,8 +4,7 @@ return { default_config = { cmd = { 'ols' }, filetypes = { 'odin' }, - root_dir = util.root_pattern('ols.json', '.git'), - single_file_support = true, + root_dir = util.root_pattern('ols.json', '.git', '*.odin'), }, docs = { description = [[ @@ -14,7 +13,7 @@ return { `Odin Language Server`. ]], default_config = { - root_dir = [[util.root_pattern("ols.json", ".git")]], + root_dir = [[util.root_pattern("ols.json", ".git", "*.odin")]], }, }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/omnisharp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/omnisharp.lua new file mode 100644 index 0000000..71af00a --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/omnisharp.lua @@ -0,0 +1,144 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + settings = { + FormattingOptions = { + -- Enables support for reading code style, naming convention and analyzer + -- settings from .editorconfig. + EnableEditorConfigSupport = true, + -- Specifies whether 'using' directives should be grouped and sorted during + -- document formatting. + OrganizeImports = nil, + }, + MsBuild = { + -- If true, MSBuild project system will only load projects for files that + -- were opened in the editor. This setting is useful for big C# codebases + -- and allows for faster initialization of code navigation features only + -- for projects that are relevant to code that is being edited. With this + -- setting enabled OmniSharp may load fewer projects and may thus display + -- incomplete reference lists for symbols. + LoadProjectsOnDemand = nil, + }, + RoslynExtensionsOptions = { + -- Enables support for roslyn analyzers, code fixes and rulesets. + EnableAnalyzersSupport = nil, + -- Enables support for showing unimported types and unimported extension + -- methods in completion lists. When committed, the appropriate using + -- directive will be added at the top of the current file. This option can + -- have a negative impact on initial completion responsiveness, + -- particularly for the first few completion sessions after opening a + -- solution. + EnableImportCompletion = nil, + -- Only run analyzers against open files when 'enableRoslynAnalyzers' is + -- true + AnalyzeOpenDocumentsOnly = nil, + }, + Sdk = { + -- Specifies whether to include preview versions of the .NET SDK when + -- determining which version to use for project loading. + IncludePrereleases = true, + }, + }, + + filetypes = { 'cs', 'vb' }, + root_dir = util.root_pattern('*.sln', '*.csproj', 'omnisharp.json', 'function.json'), + on_new_config = function(new_config, _) + -- Get the initially configured value of `cmd` + new_config.cmd = { unpack(new_config.cmd or {}) } + + -- Append hard-coded command arguments + table.insert(new_config.cmd, '-z') -- https://github.com/OmniSharp/omnisharp-vscode/pull/4300 + vim.list_extend(new_config.cmd, { '--hostPID', tostring(vim.fn.getpid()) }) + table.insert(new_config.cmd, 'DotNet:enablePackageRestore=false') + vim.list_extend(new_config.cmd, { '--encoding', 'utf-8' }) + table.insert(new_config.cmd, '--languageserver') + + -- Append configuration-dependent command arguments + local function flatten(tbl) + local ret = {} + for k, v in pairs(tbl) do + if type(v) == 'table' then + for _, pair in ipairs(flatten(v)) do + ret[#ret + 1] = k .. ':' .. pair + end + else + ret[#ret + 1] = k .. '=' .. vim.inspect(v) + end + end + return ret + end + if new_config.settings then + vim.list_extend(new_config.cmd, flatten(new_config.settings)) + end + + -- Disable the handling of multiple workspaces in a single instance + new_config.capabilities = vim.deepcopy(new_config.capabilities) + new_config.capabilities.workspace.workspaceFolders = false -- https://github.com/OmniSharp/omnisharp-roslyn/issues/909 + end, + init_options = {}, + }, + docs = { + description = [[ +https://github.com/omnisharp/omnisharp-roslyn +OmniSharp server based on Roslyn workspaces + +`omnisharp-roslyn` can be installed by downloading and extracting a release from [here](https://github.com/OmniSharp/omnisharp-roslyn/releases). +OmniSharp can also be built from source by following the instructions [here](https://github.com/omnisharp/omnisharp-roslyn#downloading-omnisharp). + +OmniSharp requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. + +**By default, omnisharp-roslyn doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. + +For `go_to_definition` to work fully, extended `textDocument/definition` handler is needed, for example see [omnisharp-extended-lsp.nvim](https://github.com/Hoffs/omnisharp-extended-lsp.nvim) + +```lua +require'lspconfig'.omnisharp.setup { + cmd = { "dotnet", "/path/to/omnisharp/OmniSharp.dll" }, + + settings = { + FormattingOptions = { + -- Enables support for reading code style, naming convention and analyzer + -- settings from .editorconfig. + EnableEditorConfigSupport = true, + -- Specifies whether 'using' directives should be grouped and sorted during + -- document formatting. + OrganizeImports = nil, + }, + MsBuild = { + -- If true, MSBuild project system will only load projects for files that + -- were opened in the editor. This setting is useful for big C# codebases + -- and allows for faster initialization of code navigation features only + -- for projects that are relevant to code that is being edited. With this + -- setting enabled OmniSharp may load fewer projects and may thus display + -- incomplete reference lists for symbols. + LoadProjectsOnDemand = nil, + }, + RoslynExtensionsOptions = { + -- Enables support for roslyn analyzers, code fixes and rulesets. + EnableAnalyzersSupport = nil, + -- Enables support for showing unimported types and unimported extension + -- methods in completion lists. When committed, the appropriate using + -- directive will be added at the top of the current file. This option can + -- have a negative impact on initial completion responsiveness, + -- particularly for the first few completion sessions after opening a + -- solution. + EnableImportCompletion = nil, + -- Only run analyzers against open files when 'enableRoslynAnalyzers' is + -- true + AnalyzeOpenDocumentsOnly = nil, + }, + Sdk = { + -- Specifies whether to include preview versions of the .NET SDK when + -- determining which version to use for project loading. + IncludePrereleases = true, + }, + }, +} +``` +]], + default_config = { + root_dir = [[root_pattern("*.sln", "*.csproj", "omnisharp.json", "function.json")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/opencl_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/opencl_ls.lua index dc88d24..dc88d24 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/opencl_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/opencl_ls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/openedge_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/openedge_ls.lua new file mode 100644 index 0000000..682b683 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/openedge_ls.lua @@ -0,0 +1,55 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + filetypes = { 'progress' }, + root_dir = util.root_pattern 'openedge-project.json', + on_new_config = function(config) + if not config.cmd and config.oe_jar_path then + config.cmd = { + 'java', + '--add-opens=java.base/java.lang=ALL-UNNAMED', + '--add-opens=java.base/java.math=ALL-UNNAMED', + '--add-opens=java.base/java.util=ALL-UNNAMED', + '--add-opens=java.base/java.util.concurrent=ALL-UNNAMED', + '--add-opens=java.base/java.net=ALL-UNNAMED', + '--add-opens=java.base/java.text=ALL-UNNAMED', + } + if config.debug then + config.cmd[#config.cmd + 1] = '-Dorg.slf4j.simpleLogger.defaultLogLevel=DEBUG' + end + config.cmd[#config.cmd + 1] = '-jar' + config.cmd[#config.cmd + 1] = config.oe_jar_path + if config.dlc then + config.cmd[#config.cmd + 1] = '--dlc' + config.cmd[#config.cmd + 1] = config.dlc + end + if config.trace then + config.cmd[#config.cmd + 1] = '--trace' + end + end + end, + }, + docs = { + description = [[ +[Language server](https://github.com/vscode-abl/vscode-abl) for Progress OpenEdge ABL. + +For manual installation, download abl-lsp.jar from the [VSCode +extension](https://github.com/vscode-abl/vscode-abl/releases/latest). + +Configuration + +```lua +require('lspconfig').['openedge_ls'].setup { + oe_jar_path = '/path/to/abl-lsp.jar', + dlc = '12.2:/path/to/dlc-12.2', -- Version number and OpenEdge root directory (colon separator) + debug = false, -- Set to true for debug logging + trace = false -- Set to true for trace logging (REALLY verbose) +} +``` +]], + default_config = { + root_dir = [[root_pattern('openedge-project.json')]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/openscad_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/openscad_ls.lua index e5ca9ca..e5ca9ca 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/openscad_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/openscad_ls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/openscad_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/openscad_lsp.lua new file mode 100644 index 0000000..f00a377 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/openscad_lsp.lua @@ -0,0 +1,22 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'openscad-lsp', '--stdio' }, + filetypes = { 'openscad' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [=[ +https://github.com/Leathong/openscad-LSP + +A Language Server Protocol server for OpenSCAD + +You can build and install `openscad-lsp` binary with `cargo`: +```sh +cargo install openscad-lsp +``` +]=], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pact_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pact_ls.lua new file mode 100644 index 0000000..1eb8976 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pact_ls.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'pact-lsp' }, + filetypes = { 'pact' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/kadena-io/pact-lsp + +The Pact language server + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/pasls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pasls.lua index 5758c82..19ef848 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/pasls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pasls.lua @@ -4,7 +4,7 @@ return { default_config = { cmd = { 'pasls' }, filetypes = { 'pascal' }, - root_dir = util.find_git_ancestor, + root_dir = util.root_pattern('*.lpi', '*.lpk', '.git'), single_file_support = true, }, docs = { diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pbls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pbls.lua new file mode 100644 index 0000000..d1fbe22 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pbls.lua @@ -0,0 +1,26 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'pbls' }, + filetypes = { 'proto' }, + root_dir = util.root_pattern('.pbls.toml', '.git'), + }, + docs = { + description = [[ +https://git.sr.ht/~rrc/pbls + +Prerequisites: Ensure protoc is on your $PATH. + +`pbls` can be installed via `cargo install`: +```sh +cargo install --git https://git.sr.ht/~rrc/pbls +``` + +pbls is a Language Server for protobuf +]], + default_config = { + root_dir = [[root_pattern(".pbls.toml", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/perlls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/perlls.lua index 5d241a5..fba57d0 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/perlls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/perlls.lua @@ -10,7 +10,6 @@ return { '--', '--port 13603', '--nostdio 0', - '--version 2.1.0', }, settings = { perl = { diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/perlnavigator.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/perlnavigator.lua index 7ba3895..d3c8f7f 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/perlnavigator.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/perlnavigator.lua @@ -2,7 +2,7 @@ local util = require 'lspconfig.util' return { default_config = { - cmd = {}, + cmd = { 'perlnavigator' }, filetypes = { 'perl' }, root_dir = util.find_git_ancestor, single_file_support = true, @@ -11,16 +11,10 @@ return { description = [[ https://github.com/bscan/PerlNavigator -A Perl language server +A Perl language server. It can be installed via npm: -**By default, perlnavigator doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -Clone the PerlNavigator repo, install based on the [instructions](https://github.com/bscan/PerlNavigator#installation-for-other-editors), -and point `cmd` to `server.js` inside the `server/out` directory: - -```lua -cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'} +```sh +npm i -g perlnavigator-server ``` At minimum, you will need `perl` in your path. If you want to use a non-standard `perl` you will need to set your configuration like so: diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/perlpls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/perlpls.lua index 3326028..3326028 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/perlpls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/perlpls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pest_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pest_ls.lua new file mode 100644 index 0000000..4a56ea9 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pest_ls.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'pest-language-server' }, + filetypes = { 'pest' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/pest-parser/pest-ide-tools + +Language server for pest grammars. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/phan.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/phan.lua new file mode 100644 index 0000000..bb5242e --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/phan.lua @@ -0,0 +1,40 @@ +local util = require 'lspconfig.util' + +local cmd = { + 'phan', + '-m', + 'json', + '--no-color', + '--no-progress-bar', + '-x', + '-u', + '-S', + '--language-server-on-stdin', + '--allow-polyfill-parser', +} + +return { + default_config = { + cmd = cmd, + filetypes = { 'php' }, + single_file_support = true, + root_dir = function(pattern) + local cwd = vim.loop.cwd() + local root = util.root_pattern('composer.json', '.git')(pattern) + + -- prefer cwd if root is a descendant + return util.path.is_descendant(cwd, root) and cwd or root + end, + }, + docs = { + description = [[ +https://github.com/phan/phan + +Installation: https://github.com/phan/phan#getting-started +]], + default_config = { + cmd = cmd, + root_dir = [[root_pattern("composer.json", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/phpactor.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/phpactor.lua index 5a1f0d1..b3c4009 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/phpactor.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/phpactor.lua @@ -6,7 +6,7 @@ return { filetypes = { 'php' }, root_dir = function(pattern) local cwd = vim.loop.cwd() - local root = util.root_pattern('composer.json', '.git')(pattern) + local root = util.root_pattern('composer.json', '.git', '.phpactor.json', '.phpactor.yml')(pattern) -- prefer cwd if root is a descendant return util.path.is_descendant(cwd, root) and cwd or root diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pico8_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pico8_ls.lua new file mode 100644 index 0000000..0da26b7 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pico8_ls.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'pico8-ls', '--stdio' }, + filetypes = { 'p8' }, + root_dir = util.root_pattern '*.p8', + settings = {}, + }, + docs = { + description = [[ +https://github.com/japhib/pico8-ls + +Full language support for the PICO-8 dialect of Lua. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pkgbuild_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pkgbuild_language_server.lua new file mode 100644 index 0000000..d3c9f31 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pkgbuild_language_server.lua @@ -0,0 +1,19 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'pkgbuild-language-server' }, + filetypes = { 'PKGBUILD' }, + root_dir = util.find_git_ancestor, + }, + docs = { + description = [[ +https://github.com/Freed-Wu/pkgbuild-language-server + +Language server for ArchLinux/Windows Msys2's PKGBUILD. +]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/please.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/please.lua index 085d1e7..085d1e7 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/please.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/please.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/postgres_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/postgres_lsp.lua new file mode 100644 index 0000000..a45824a --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/postgres_lsp.lua @@ -0,0 +1,20 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'postgres_lsp' }, + filetypes = { 'sql' }, + root_dir = util.root_pattern 'root-file.txt', + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/supabase/postgres_lsp + +A Language Server for Postgres + ]], + default_config = { + root_dir = [[util.root_pattern 'root-file.txt']], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/powershell_es.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/powershell_es.lua index ac723f4..d4cb744 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/powershell_es.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/powershell_es.lua @@ -5,7 +5,7 @@ local temp_path = vim.fn.stdpath 'cache' local function make_cmd(new_config) if new_config.bundle_path ~= nil then local command_fmt = - [[%s/PowerShellEditorServices/Start-EditorServices.ps1 -BundledModulesPath %s -LogPath %s/powershell_es.log -SessionDetailsPath %s/powershell_es.session.json -FeatureFlags @() -AdditionalModules @() -HostName nvim -HostProfileId 0 -HostVersion 1.0.0 -Stdio -LogLevel Normal]] + [[& '%s/PowerShellEditorServices/Start-EditorServices.ps1' -BundledModulesPath '%s' -LogPath '%s/powershell_es.log' -SessionDetailsPath '%s/powershell_es.session.json' -FeatureFlags @() -AdditionalModules @() -HostName nvim -HostProfileId 0 -HostVersion 1.0.0 -Stdio -LogLevel Normal]] local command = command_fmt:format(new_config.bundle_path, new_config.bundle_path, temp_path, temp_path) return { new_config.shell, '-NoLogo', '-NoProfile', '-Command', command } end diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/prismals.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/prismals.lua index f330e25..16d252e 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/prismals.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/prismals.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'prisma-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'prisma-language-server', '--stdio' }, filetypes = { 'prisma' }, settings = { prisma = { diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/prolog_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/prolog_ls.lua new file mode 100644 index 0000000..91b4ba3 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/prolog_ls.lua @@ -0,0 +1,27 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { + 'swipl', + '-g', + 'use_module(library(lsp_server)).', + '-g', + 'lsp_server:main', + '-t', + 'halt', + '--', + 'stdio', + }, + filetypes = { 'prolog' }, + root_dir = util.root_pattern 'pack.pl', + single_file_support = true, + }, + docs = { + description = [[ + https://github.com/jamesnvc/lsp_server + + Language Server Protocol server for SWI-Prolog + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/prosemd_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/prosemd_lsp.lua index 048e4b4..048e4b4 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/prosemd_lsp.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/prosemd_lsp.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/psalm.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/psalm.lua index 01f7581..f0f25f2 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/psalm.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/psalm.lua @@ -1,14 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'psalm-language-server' - -if vim.fn.has 'win32' == 1 then - bin_name = bin_name .. '.bat' -end - return { default_config = { - cmd = { bin_name }, + cmd = { 'psalm', '--language-server' }, filetypes = { 'php' }, root_dir = util.root_pattern('psalm.xml', 'psalm.xml.dist'), }, @@ -22,7 +16,7 @@ composer global require vimeo/psalm ``` ]], default_config = { - cmd = { 'psalm-language-server' }, + cmd = { 'psalm', '--language-server' }, root_dir = [[root_pattern("psalm.xml", "psalm.xml.dist")]], }, }, diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/puppet.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/puppet.lua index 18a1532..18a1532 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/puppet.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/puppet.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/purescriptls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/purescriptls.lua new file mode 100644 index 0000000..baed504 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/purescriptls.lua @@ -0,0 +1,29 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'purescript-language-server', '--stdio' }, + filetypes = { 'purescript' }, + root_dir = util.root_pattern( + 'bower.json', + 'flake.nix', + 'psc-package.json', + 'shell.nix', + 'spago.dhall', + 'spago.yaml' + ), + }, + docs = { + description = [[ +https://github.com/nwolverson/purescript-language-server + +The `purescript-language-server` can be added to your project and `$PATH` via + +* JavaScript package manager such as npm, pnpm, Yarn, et al. +* Nix under the `nodePackages` and `nodePackages_latest` package sets +]], + default_config = { + root_dir = [[root_pattern('bower.json', 'flake.nix', 'psc-package.json', 'shell.nix', 'spago.dhall', 'spago.yaml'),]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pylsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pylsp.lua new file mode 100644 index 0000000..d76b2ea --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pylsp.lua @@ -0,0 +1,48 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'pylsp' }, + filetypes = { 'python' }, + root_dir = function(fname) + local root_files = { + 'pyproject.toml', + 'setup.py', + 'setup.cfg', + 'requirements.txt', + 'Pipfile', + } + return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/python-lsp/python-lsp-server + +A Python 3.6+ implementation of the Language Server Protocol. + +See the [project's README](https://github.com/python-lsp/python-lsp-server) for installation instructions. + +Configuration options are documented [here](https://github.com/python-lsp/python-lsp-server/blob/develop/CONFIGURATION.md). +In order to configure an option, it must be translated to a nested Lua table and included in the `settings` argument to the `setup{}` function. +For example, in order to set the `pylsp.plugins.pycodestyle.ignore` option: +```lua +require'lspconfig'.pylsp.setup{ + settings = { + pylsp = { + plugins = { + pycodestyle = { + ignore = {'W391'}, + maxLineLength = 100 + } + } + } + } +} +``` + +Note: This is a community fork of `pyls`. + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pylyzer.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pylyzer.lua new file mode 100644 index 0000000..34a4914 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pylyzer.lua @@ -0,0 +1,34 @@ +local util = require('lspconfig').util + +return { + default_config = { + cmd = { 'pylyzer', '--server' }, + filetypes = { 'python' }, + root_dir = function(fname) + local root_files = { + 'setup.py', + 'tox.ini', + 'requirements.txt', + 'Pipfile', + 'pyproject.toml', + } + return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + settings = { + python = { + diagnostics = true, + inlayHints = true, + smartCompletion = true, + checkOnType = false, + }, + }, + }, + docs = { + description = [[ + https://github.com/mtshiba/pylyzer + + `pylyzer`, a fast static code analyzer & language server for Python. + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/pyre.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pyre.lua index 5c2f8fb..5c2f8fb 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/pyre.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pyre.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pyright.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pyright.lua new file mode 100644 index 0000000..51681df --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/pyright.lua @@ -0,0 +1,80 @@ +local util = require 'lspconfig.util' + +local root_files = { + 'pyproject.toml', + 'setup.py', + 'setup.cfg', + 'requirements.txt', + 'Pipfile', + 'pyrightconfig.json', + '.git', +} + +local function organize_imports() + local params = { + command = 'pyright.organizeimports', + arguments = { vim.uri_from_bufnr(0) }, + } + + local clients = util.get_lsp_clients { + bufnr = vim.api.nvim_get_current_buf(), + name = 'pyright', + } + for _, client in ipairs(clients) do + client.request('workspace/executeCommand', params, nil, 0) + end +end + +local function set_python_path(path) + local clients = util.get_lsp_clients { + bufnr = vim.api.nvim_get_current_buf(), + name = 'pyright', + } + for _, client in ipairs(clients) do + if client.settings then + client.settings.python = vim.tbl_deep_extend('force', client.settings.python, { pythonPath = path }) + else + client.config.settings = vim.tbl_deep_extend('force', client.config.settings, { python = { pythonPath = path } }) + end + client.notify('workspace/didChangeConfiguration', { settings = nil }) + end +end + +return { + default_config = { + cmd = { 'pyright-langserver', '--stdio' }, + filetypes = { 'python' }, + root_dir = function(fname) + return util.root_pattern(unpack(root_files))(fname) + end, + single_file_support = true, + settings = { + python = { + analysis = { + autoSearchPaths = true, + useLibraryCodeForTypes = true, + diagnosticMode = 'openFilesOnly', + }, + }, + }, + }, + commands = { + PyrightOrganizeImports = { + organize_imports, + description = 'Organize Imports', + }, + PyrightSetPythonPath = { + set_python_path, + description = 'Reconfigure pyright with the provided python path', + nargs = 1, + complete = 'file', + }, + }, + docs = { + description = [[ +https://github.com/microsoft/pyright + +`pyright`, a static type checker and language server for python +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/qml_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/qml_lsp.lua new file mode 100644 index 0000000..0f334a3 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/qml_lsp.lua @@ -0,0 +1,16 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'qml-lsp' }, + filetypes = { 'qmljs' }, + root_dir = util.root_pattern '*.qml', + }, + docs = { + description = [[ +https://invent.kde.org/sdk/qml-lsp + +LSP implementation for QML (autocompletion, live linting, etc. in editors) + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/qmlls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/qmlls.lua new file mode 100644 index 0000000..b045159 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/qmlls.lua @@ -0,0 +1,19 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'qmlls' }, + filetypes = { 'qml', 'qmljs' }, + root_dir = function(fname) + return util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/qt/qtdeclarative + +LSP implementation for QML (autocompletion, live linting, etc. in editors), + ]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/quick_lint_js.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/quick_lint_js.lua index 29daa96..762a816 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/quick_lint_js.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/quick_lint_js.lua @@ -3,7 +3,7 @@ local util = require 'lspconfig.util' return { default_config = { cmd = { 'quick-lint-js', '--lsp-server' }, - filetypes = { 'javascript' }, + filetypes = { 'javascript', 'typescript' }, root_dir = util.root_pattern('package.json', 'jsconfig.json', '.git'), single_file_support = true, }, diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/r_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/r_language_server.lua index 7e1e3f3..bdbab84 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/r_language_server.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/r_language_server.lua @@ -17,7 +17,7 @@ language. It is released on CRAN and can be easily installed by -```R +```r install.packages("languageserver") ``` ]], diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/racket_langserver.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/racket_langserver.lua index 25bd0ab..25bd0ab 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/racket_langserver.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/racket_langserver.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/raku_navigator.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/raku_navigator.lua new file mode 100644 index 0000000..26ff321 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/raku_navigator.lua @@ -0,0 +1,33 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = {}, + filetypes = { 'raku' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/bscan/RakuNavigator +A Raku language server +**By default, raku_navigator doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. +You have to install the language server manually. +Clone the RakuNavigator repo, install based on the [instructions](https://github.com/bscan/raku_Navigator#installation-for-other-editors), +and point `cmd` to `server.js` inside the `server/out` directory: +```lua +cmd = {'node', '<path_to_repo>/server/out/server.js', '--stdio'} +``` +At minimum, you will need `raku` in your path. If you want to use a non-standard `raku` you will need to set your configuration like so: +```lua +settings = { + raku_navigator = { + rakuPath = '/some/odd/location/my-raku' + } +} +``` +The `contributes.configuration.properties` section of `raku_navigator`'s `package.json` has all available configuration settings. All +settings have a reasonable default, but, at minimum, you may want to point `raku_navigator` at your `raku_tidy` and `raku_critic` configurations. +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/reason_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/reason_ls.lua index 45e7d0b..75028c7 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/reason_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/reason_ls.lua @@ -10,14 +10,7 @@ return { description = [[ Reason language server -**By default, reason_ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - You can install reason language server from [reason-language-server](https://github.com/jaredly/reason-language-server) repository. - -```lua -cmd = {'<path_to_reason_language_server>'} -``` ]], }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/regal.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/regal.lua new file mode 100644 index 0000000..24ec092 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/regal.lua @@ -0,0 +1,28 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'regal', 'language-server' }, + filetypes = { 'rego' }, + root_dir = function(fname) + return util.root_pattern '*.rego'(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/StyraInc/regal + +A linter for Rego, with support for running as an LSP server. + +`regal` can be installed by running: +```sh +go install github.com/StyraInc/regal@latest +``` + ]], + default_config = { + root_dir = [[root_pattern("*.rego", ".git")]], + single_file_support = true, + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/regols.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/regols.lua new file mode 100644 index 0000000..f872a52 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/regols.lua @@ -0,0 +1,28 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'regols' }, + filetypes = { 'rego' }, + root_dir = function(fname) + return util.root_pattern '*.rego'(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/kitagry/regols + +OPA Rego language server. + +`regols` can be installed by running: +```sh +go install github.com/kitagry/regols@latest +``` + ]], + default_config = { + root_dir = [[root_pattern("*.rego", ".git")]], + single_file_support = true, + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/relay_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/relay_lsp.lua new file mode 100644 index 0000000..acaa617 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/relay_lsp.lua @@ -0,0 +1,110 @@ +local util = require 'lspconfig.util' +local log = require 'vim.lsp.log' + +return { + default_config = { + -- (default: false) Whether or not we should automatically start the + -- Relay Compiler in watch mode when you open a project + auto_start_compiler = false, + + -- (default: nil) Path to a relay config relative to the `root_dir`. + -- Without this, the compiler will search for your config. This is + -- helpful if your relay project is in a nested directory. + path_to_config = nil, + + cmd = { 'relay-compiler', 'lsp' }, + filetypes = { + 'javascript', + 'javascriptreact', + 'javascript.jsx', + 'typescript', + 'typescriptreact', + 'typescript.tsx', + }, + root_dir = util.root_pattern('relay.config.*', 'package.json'), + on_new_config = function(config, root_dir) + local project_root = util.find_node_modules_ancestor(root_dir) + local node_bin_path = util.path.join(project_root, 'node_modules', '.bin') + local compiler_cmd = { util.path.join(node_bin_path, 'relay-compiler'), '--watch' } + local path = node_bin_path .. util.path.path_separator .. vim.env.PATH + if config.cmd_env then + config.cmd_env.PATH = path + else + config.cmd_env = { PATH = path } + end + + if config.path_to_config then + config.path_to_config = util.path.sanitize(config.path_to_config) + local path_to_config = util.path.join(root_dir, config.path_to_config) + if util.path.exists(path_to_config) then + vim.list_extend(config.cmd, { config.path_to_config }) + vim.list_extend(compiler_cmd, { config.path_to_config }) + else + log.error "[Relay LSP] Can't find Relay config file. Fallback to the default location..." + end + end + if config.auto_start_compiler then + vim.fn.jobstart(compiler_cmd, { + on_exit = function() + log.info '[Relay LSP] Relay Compiler exited' + end, + cwd = project_root, + }) + end + end, + handlers = { + ['window/showStatus'] = function(_, result) + if not result then + return {} + end + local log_message = string.format('[Relay LSP] %q', result.message) + if result.type == 1 then + log.error(log_message) + end + if result.type == 2 then + log.warn(log_message) + end + if result.type == 3 then + log.info(log_message) + end + return {} + end, + }, + }, + docs = { + description = [[ + https://github.com/facebook/relay + `Relay` is a JavaScript framework for building data-driven React applications + + Setup: + + - Make sure you have a Relay config file somewhere in your project. + - We support standard config file formats (`.yml`, `.js`, `.json`), and the the `relay` field in your `package.json` + - Make sure you have the `relay-compiler` installed in your project. The bare minimum is v13. + - Make sure you are able to run the `relay-compiler` command from the command line. If `yarn relay-compiler` works, it's very likely that the LSP will work. + - Remove / disable any conflicting GraphQL LSPs you have installed. + + Relay LSP is a part of the Relay Compiler binary and available when adding `relay-compiler` to your project's devDependencies. + + ```lua + require'lspconfig'.relay_lsp.setup { + -- (default: false) Whether or not we should automatically start + -- the Relay Compiler in watch mode when you open a project + auto_start_compiler = false, + + + -- (default: null) Path to a relay config relative to the + -- `root_dir`. Without this, the compiler will search for your + -- config. This is helpful if your relay project is in a nested + -- directory. + path_to_config = nil, + } + ``` + ]], + default_config = { + root_dir = [[root_pattern("relay.config.*", "package.json")]], + auto_start_compiler = false, + path_to_config = nil, + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/remark_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/remark_ls.lua index 4ef3717..54eabe7 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/remark_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/remark_ls.lua @@ -1,17 +1,19 @@ local util = require 'lspconfig.util' -local bin_name = 'remark-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'remark-language-server', '--stdio' }, filetypes = { 'markdown' }, - root_dir = util.find_git_ancestor, + root_dir = util.root_pattern( + '.remarkrc', + '.remarkrc.json', + '.remarkrc.js', + '.remarkrc.cjs', + '.remarkrc.mjs', + '.remarkrc.yml', + '.remarkrc.yaml', + '.remarkignore' + ), single_file_support = true, }, docs = { diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rescriptls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rescriptls.lua new file mode 100644 index 0000000..882a110 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rescriptls.lua @@ -0,0 +1,28 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'rescript-language-server', '--stdio' }, + filetypes = { 'rescript' }, + root_dir = util.root_pattern('bsconfig.json', 'rescript.json', '.git'), + settings = {}, + init_options = { + extensionConfiguration = { + askToStartBuild = false, + }, + }, + }, + docs = { + description = [[ +https://github.com/rescript-lang/rescript-vscode/tree/master/server + +ReScript Language Server can be installed via npm: +```sh +npm install -g @rescript/language-server +``` + +See the init_options supported (see https://github.com/rescript-lang/rescript-vscode/tree/master/server/config.md): +]], + root_dir = [[root_pattern('bsconfig.json', 'rescript.json', '.git')]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rls.lua index 363b81d..363b81d 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rls.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rnix.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rnix.lua index aa7f00e..aa7f00e 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rnix.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rnix.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/robotframework_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/robotframework_ls.lua index 7cb772b..d1c25f5 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/robotframework_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/robotframework_ls.lua @@ -5,7 +5,8 @@ return { cmd = { 'robotframework_ls' }, filetypes = { 'robot' }, root_dir = function(fname) - return util.root_pattern('robotidy.toml', 'pyproject.toml')(fname) or util.find_git_ancestor(fname) + return util.root_pattern('robotidy.toml', 'pyproject.toml', 'conda.yaml', 'robot.yaml')(fname) + or util.find_git_ancestor(fname) end, }, docs = { @@ -15,7 +16,8 @@ https://github.com/robocorp/robotframework-lsp Language Server Protocol implementation for Robot Framework. ]], default_config = { - root_dir = "util.root_pattern('robotidy.toml', 'pyproject.toml')(fname) or util.find_git_ancestor(fname)", + root_dir = "util.root_pattern('robotidy.toml', 'pyproject.toml', 'conda.yaml', 'robot.yaml')(fname)" + .. '\n or util.find_git_ancestor(fname)', }, }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/roc_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/roc_ls.lua new file mode 100644 index 0000000..6737736 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/roc_ls.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'roc_language_server' }, + filetypes = { 'roc' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/roc-lang/roc/tree/main/crates/language_server#roc_language_server + +The built-in language server for the Roc programming language. +[Installation](https://github.com/roc-lang/roc/tree/main/crates/language_server#installing) +]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rome.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rome.lua index 075d31a..ed23a18 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/rome.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rome.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'rome' -local cmd = { bin_name, 'lsp' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, 'lsp' } -end - return { default_config = { - cmd = cmd, + cmd = { 'rome', 'lsp-proxy' }, filetypes = { 'javascript', 'javascriptreact', @@ -31,6 +24,8 @@ https://rome.tools Language server for the Rome Frontend Toolchain. +(Unmaintained, use [Biome](https://biomejs.dev/blog/annoucing-biome) instead.) + ```sh npm install [-g] rome ``` diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rubocop.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rubocop.lua new file mode 100644 index 0000000..0d2cd29 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rubocop.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'rubocop', '--lsp' }, + filetypes = { 'ruby' }, + root_dir = util.root_pattern('Gemfile', '.git'), + }, + docs = { + description = [[ +https://github.com/rubocop/rubocop + ]], + default_config = { + root_dir = [[root_pattern("Gemfile", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ruby_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ruby_lsp.lua new file mode 100644 index 0000000..dad56e6 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ruby_lsp.lua @@ -0,0 +1,33 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'ruby-lsp' }, + filetypes = { 'ruby' }, + root_dir = util.root_pattern('Gemfile', '.git'), + init_options = { + formatter = 'auto', + }, + single_file_support = true, + }, + docs = { + description = [[ +https://shopify.github.io/ruby-lsp/ + +This gem is an implementation of the language server protocol specification for +Ruby, used to improve editor features. + +Install the gem. There's no need to require it, since the server is used as a +standalone executable. + +```sh +group :development do + gem "ruby-lsp", require: false +end +``` + ]], + default_config = { + root_dir = [[root_pattern("Gemfile", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ruff.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ruff.lua new file mode 100644 index 0000000..09a494c --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ruff.lua @@ -0,0 +1,41 @@ +local util = require 'lspconfig.util' + +local root_files = { + 'pyproject.toml', + 'ruff.toml', + '.ruff.toml', +} + +return { + default_config = { + cmd = { 'ruff', 'server', '--preview' }, + filetypes = { 'python' }, + root_dir = util.root_pattern(unpack(root_files)) or util.find_git_ancestor(), + single_file_support = true, + settings = {}, + }, + docs = { + description = [[ +https://github.com/astral-sh/ruff + +A Language Server Protocol implementation for Ruff, an extremely fast Python linter and code formatter, written in Rust. It can be installed via pip. + +```sh +pip install ruff +``` + +_Requires Ruff v0.3.3 or later._ + +This is the new Rust-based version of the original `ruff-lsp` implementation. It's currently in alpha, meaning that some features are under development. Currently, the following capabilities are supported: + +1. Diagnostics +2. Code actions +3. Formatting +4. Range Formatting + +Please note that the `ruff-lsp` server will continue to be maintained until further notice. + + ]], + root_dir = [[root_pattern("pyproject.toml", "ruff.toml", ".ruff.toml", ".git")]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ruff_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ruff_lsp.lua new file mode 100644 index 0000000..1a10285 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ruff_lsp.lua @@ -0,0 +1,42 @@ +local util = require 'lspconfig.util' + +local root_files = { + 'pyproject.toml', + 'ruff.toml', +} + +return { + default_config = { + cmd = { 'ruff-lsp' }, + filetypes = { 'python' }, + root_dir = util.root_pattern(unpack(root_files)) or util.find_git_ancestor(), + single_file_support = true, + settings = {}, + }, + docs = { + description = [[ +https://github.com/astral-sh/ruff-lsp + +A Language Server Protocol implementation for Ruff, an extremely fast Python linter and code transformation tool, written in Rust. It can be installed via pip. + +```sh +pip install ruff-lsp +``` + +Extra CLI arguments for `ruff` can be provided via + +```lua +require'lspconfig'.ruff_lsp.setup{ + init_options = { + settings = { + -- Any extra CLI arguments for `ruff` go here. + args = {}, + } + } +} +``` + + ]], + root_dir = [[root_pattern("pyproject.toml", "ruff.toml", ".git")]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rune_languageserver.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rune_languageserver.lua new file mode 100644 index 0000000..7f51047 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rune_languageserver.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'rune-languageserver' }, + filetypes = { 'rune' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://crates.io/crates/rune-languageserver + +A language server for the [Rune](https://rune-rs.github.io/) Language, +an embeddable dynamic programming language for Rust + ]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rust_analyzer.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rust_analyzer.lua new file mode 100644 index 0000000..61dfdc1 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/rust_analyzer.lua @@ -0,0 +1,117 @@ +local util = require 'lspconfig.util' +local async = require 'lspconfig.async' + +local function reload_workspace(bufnr) + bufnr = util.validate_bufnr(bufnr) + local clients = util.get_lsp_clients { bufnr = bufnr, name = 'rust_analyzer' } + for _, client in ipairs(clients) do + vim.notify 'Reloading Cargo Workspace' + client.request('rust-analyzer/reloadWorkspace', nil, function(err) + if err then + error(tostring(err)) + end + vim.notify 'Cargo workspace reloaded' + end, 0) + end +end + +local function is_library(fname) + local user_home = util.path.sanitize(vim.env.HOME) + local cargo_home = os.getenv 'CARGO_HOME' or util.path.join(user_home, '.cargo') + local registry = util.path.join(cargo_home, 'registry', 'src') + local git_registry = util.path.join(cargo_home, 'git', 'checkouts') + + local rustup_home = os.getenv 'RUSTUP_HOME' or util.path.join(user_home, '.rustup') + local toolchains = util.path.join(rustup_home, 'toolchains') + + for _, item in ipairs { toolchains, registry, git_registry } do + if util.path.is_descendant(item, fname) then + local clients = util.get_lsp_clients { name = 'rust_analyzer' } + return #clients > 0 and clients[#clients].config.root_dir or nil + end + end +end + +local function register_cap() + local capabilities = vim.lsp.protocol.make_client_capabilities() + capabilities.experimental = { + serverStatusNotification = true, + } + return capabilities +end + +return { + default_config = { + cmd = { 'rust-analyzer' }, + filetypes = { 'rust' }, + single_file_support = true, + root_dir = function(fname) + local reuse_active = is_library(fname) + if reuse_active then + return reuse_active + end + + local cargo_crate_dir = util.root_pattern 'Cargo.toml'(fname) + local cargo_workspace_root + + if cargo_crate_dir ~= nil then + local cmd = { + 'cargo', + 'metadata', + '--no-deps', + '--format-version', + '1', + '--manifest-path', + util.path.join(cargo_crate_dir, 'Cargo.toml'), + } + + local result = async.run_command(cmd) + + if result and result[1] then + result = vim.json.decode(table.concat(result, '')) + if result['workspace_root'] then + cargo_workspace_root = util.path.sanitize(result['workspace_root']) + end + end + end + + return cargo_workspace_root + or cargo_crate_dir + or util.root_pattern 'rust-project.json'(fname) + or util.find_git_ancestor(fname) + end, + capabilities = register_cap(), + }, + commands = { + CargoReload = { + function() + reload_workspace(0) + end, + description = 'Reload current cargo workspace', + }, + }, + docs = { + description = [[ +https://github.com/rust-lang/rust-analyzer + +rust-analyzer (aka rls 2.0), a language server for Rust + + +See [docs](https://github.com/rust-lang/rust-analyzer/blob/master/docs/user/generated_config.adoc) for extra settings. The settings can be used like this: +```lua +require'lspconfig'.rust_analyzer.setup{ + settings = { + ['rust-analyzer'] = { + diagnostics = { + enable = false; + } + } + } +} +``` + ]], + default_config = { + root_dir = [[root_pattern("Cargo.toml", "rust-project.json")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/salt_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/salt_ls.lua index 65d1d32..65d1d32 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/salt_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/salt_ls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/scheme_langserver.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/scheme_langserver.lua new file mode 100644 index 0000000..0eaaa28 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/scheme_langserver.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' +local bin_name = 'scheme-langserver' +local cmd = { bin_name } +local root_files = { + 'Akku.manifest', + '.git', +} + +return { + default_config = { + cmd = cmd, + filetypes = { 'scheme' }, + root_dir = util.root_pattern(unpack(root_files)), + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/ufo5260987423/scheme-langserver +`scheme-langserver`, a language server protocol implementation for scheme. +And for nvim user, please add .sls to scheme file extension list. +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/scry.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/scry.lua index 8350a43..8350a43 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/scry.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/scry.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/serve_d.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/serve_d.lua index 09d1b10..09d1b10 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/serve_d.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/serve_d.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/shopify_theme_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/shopify_theme_ls.lua new file mode 100644 index 0000000..bf746a8 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/shopify_theme_ls.lua @@ -0,0 +1,36 @@ +local util = require 'lspconfig.util' + +local root_files = { + '.shopifyignore', + '.theme-check.yml', + '.theme-check.yaml', + 'shopify.theme.toml', +} + +return { + default_config = { + cmd = { + 'shopify', + 'theme', + 'language-server', + }, + filetypes = { 'liquid' }, + root_dir = util.root_pattern(unpack(root_files)), + settings = {}, + }, + docs = { + description = [[ +https://shopify.dev/docs/api/shopify-cli + +[Language Server](https://shopify.dev/docs/themes/tools/cli/language-server) and Theme Check (linter) for Shopify themes. + +`shopify` can be installed via npm `npm install -g @shopify/cli`. + +```lua +require lspconfig.shopify_theme_ls.setup {} +``` + +Note: This LSP already includes Theme Check so you don't need to use the `theme_check` server configuration as well. +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sixtyfps.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sixtyfps.lua index da90fe3..da90fe3 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sixtyfps.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sixtyfps.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/slangd.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/slangd.lua new file mode 100644 index 0000000..642b4dd --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/slangd.lua @@ -0,0 +1,44 @@ +local util = require 'lspconfig.util' +local bin_name = 'slangd' + +if vim.fn.has 'win32' == 1 then + bin_name = 'slangd.exe' +end + +return { + default_config = { + cmd = { bin_name }, + filetypes = { 'hlsl', 'shaderslang' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/shader-slang/slang + +The `slangd` binary can be downloaded as part of [slang releases](https://github.com/shader-slang/slang/releases) or +by [building `slang` from source](https://github.com/shader-slang/slang/blob/master/docs/building.md). + +The server can be configured by passing a "settings" object to `slangd.setup{}`: + +```lua +require('lspconfig').slangd.setup{ + settings = { + slang = { + predefinedMacros = {"MY_VALUE_MACRO=1"}, + inlayHints = { + deducedTypes = true, + parameterNames = true, + } + } + } +} +``` +Available options are documented [here](https://github.com/shader-slang/slang-vscode-extension/tree/main?tab=readme-ov-file#configurations) +or in more detail [here](https://github.com/shader-slang/slang-vscode-extension/blob/main/package.json#L70). +]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/slint_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/slint_lsp.lua index e921cb6..e921cb6 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/slint_lsp.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/slint_lsp.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/smarty_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/smarty_ls.lua new file mode 100644 index 0000000..fd6c212 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/smarty_ls.lua @@ -0,0 +1,39 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'smarty-language-server', '--stdio' }, + filetypes = { 'smarty' }, + root_dir = function(pattern) + local cwd = vim.loop.cwd() + local root = util.root_pattern('composer.json', '.git')(pattern) + + -- prefer cwd if root is a descendant + return util.path.is_descendant(cwd, root) and cwd or root + end, + settings = { + smarty = { + pluginDirs = {}, + }, + css = { + validate = true, + }, + }, + init_options = { + storageDir = nil, + }, + }, + docs = { + description = [[ +https://github.com/landeaux/vscode-smarty-langserver-extracted + +Language server for Smarty. + +`smarty-language-server` can be installed via `npm`: + +```sh +npm i -g vscode-smarty-langserver-extracted +``` +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/smithy_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/smithy_ls.lua new file mode 100644 index 0000000..ef6f010 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/smithy_ls.lua @@ -0,0 +1,30 @@ +local util = require 'lspconfig.util' + +-- pass 0 as the first argument to use STDIN/STDOUT for communication +local cmd = { 'smithy-language-server', '0' } + +local root_files = { + 'smithy-build.json', + 'build.gradle', + 'build.gradle.kts', + '.git', +} + +return { + default_config = { + cmd = cmd, + filetypes = { 'smithy' }, + single_file_support = true, + root_dir = util.root_pattern(unpack(root_files)), + }, + docs = { + description = [[ +https://github.com/awslabs/smithy-language-server + +`Smithy Language Server`, A Language Server Protocol implementation for the Smithy IDL +]], + default_config = { + root_dir = [[root_pattern("smithy-build.json", "build.gradle", "build.gradle.kts", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/snyk_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/snyk_ls.lua new file mode 100644 index 0000000..50faa0d --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/snyk_ls.lua @@ -0,0 +1,37 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'snyk-ls' }, + root_dir = util.root_pattern('.git', '.snyk'), + filetypes = { + 'go', + 'gomod', + 'javascript', + 'typescript', + 'json', + 'python', + 'requirements', + 'helm', + 'yaml', + 'terraform', + 'terraform-vars', + }, + single_file_support = true, + settings = {}, + init_options = { + activateSnykCode = 'true', + }, + }, + docs = { + description = [[ +https://github.com/snyk/snyk-ls + +LSP for Snyk Open Source, Snyk Infrastructure as Code, and Snyk Code. +]], + default_config = { + root_dir = [[root_pattern(".git", ".snyk")]], + init_options = 'Configuration from https://github.com/snyk/snyk-ls#configuration-1', + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/solang.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solang.lua index be1d1ec..cef5321 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/solang.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solang.lua @@ -2,7 +2,7 @@ local util = require 'lspconfig.util' return { default_config = { - cmd = { 'solang', '--language-server', '--target', 'ewasm' }, + cmd = { 'solang', 'language-server', '--target', 'evm' }, filetypes = { 'solidity' }, root_dir = util.find_git_ancestor, }, diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/solargraph.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solargraph.lua index 4fba400..c33c34b 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/solargraph.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solargraph.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'solargraph' -local cmd = { bin_name, 'stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, 'stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'solargraph', 'stdio' }, settings = { solargraph = { diagnostics = true, diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/solc.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solc.lua index 42e44fe..9ae3948 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/solc.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solc.lua @@ -4,7 +4,7 @@ return { default_config = { cmd = { 'solc', '--lsp' }, filetypes = { 'solidity' }, - root_dir = util.root_pattern '.git', + root_dir = util.root_pattern('hardhat.config.*', '.git'), }, docs = { description = [[ @@ -13,7 +13,7 @@ https://docs.soliditylang.org/en/latest/installing-solidity.html solc is the native language server for the Solidity language. ]], default_config = { - root_dir = [[root_pattern(".git")]], + root_dir = [[root_pattern('hardhat.config.*', '.git')]], }, }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solidity.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solidity.lua new file mode 100644 index 0000000..4e254bd --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solidity.lua @@ -0,0 +1,49 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'solidity-ls', '--stdio' }, + filetypes = { 'solidity' }, + root_dir = util.root_pattern('.git', 'package.json'), + settings = { solidity = { includePath = '', remapping = {} } }, + }, + docs = { + description = [[ +https://github.com/qiuxiang/solidity-ls + +npm i solidity-ls -g + +Make sure that solc is installed and it's the same version of the file. solc-select is recommended. + +Solidity language server is a LSP with autocomplete, go to definition and diagnostics. + +If you use brownie, use this root_dir: +root_dir = util.root_pattern('brownie-config.yaml', '.git') + +on includePath, you can add an extra path to search for external libs, on remapping you can remap lib <> path, like: + +```lua +{ solidity = { includePath = '/Users/your_user/.brownie/packages/', remapping = { ["@OpenZeppelin/"] = 'OpenZeppelin/openzeppelin-contracts@4.6.0/' } } } +``` + +**For brownie users** +Change the root_dir to: + +```lua +root_pattern("brownie-config.yaml", ".git") +``` + +The best way of using it is to have a package.json in your project folder with the packages that you will use. +After installing with package.json, just create a `remappings.txt` with: + +``` +@OpenZeppelin/=node_modules/OpenZeppelin/openzeppelin-contracts@4.6.0/ +``` + +You can omit the node_modules as well. +]], + default_config = { + root_dir = [[root_pattern("package.json", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solidity_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solidity_ls.lua new file mode 100644 index 0000000..1183a9c --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solidity_ls.lua @@ -0,0 +1,36 @@ +local util = require 'lspconfig.util' + +local root_files = { + 'hardhat.config.js', + 'hardhat.config.ts', + 'foundry.toml', + 'remappings.txt', + 'truffle.js', + 'truffle-config.js', + 'ape-config.yaml', +} + +return { + default_config = { + cmd = { 'vscode-solidity-server', '--stdio' }, + filetypes = { 'solidity' }, + root_dir = util.root_pattern(unpack(root_files)) or util.root_pattern('.git', 'package.json'), + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/juanfranblanco/vscode-solidity + +`vscode-solidity-server` can be installed via `npm`: + +```sh +npm install -g vscode-solidity-server +``` + +`vscode-solidity-server` is a language server for the Solidity language ported from the VSCode "solidity" extension. +]], + default_config = { + root_dir = [[root_pattern("]] .. table.concat(root_files, '", "') .. [[", ".git", "package.json")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solidity_ls_nomicfoundation.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solidity_ls_nomicfoundation.lua new file mode 100644 index 0000000..cab836c --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/solidity_ls_nomicfoundation.lua @@ -0,0 +1,36 @@ +local util = require 'lspconfig.util' + +local root_files = { + 'hardhat.config.js', + 'hardhat.config.ts', + 'foundry.toml', + 'remappings.txt', + 'truffle.js', + 'truffle-config.js', + 'ape-config.yaml', +} + +return { + default_config = { + cmd = { 'nomicfoundation-solidity-language-server', '--stdio' }, + filetypes = { 'solidity' }, + root_dir = util.root_pattern(unpack(root_files)) or util.root_pattern('.git', 'package.json'), + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/NomicFoundation/hardhat-vscode/blob/development/server/README.md + +`nomicfoundation-solidity-language-server` can be installed via `npm`: + +```sh +npm install -g @nomicfoundation/solidity-language-server +``` + +A language server for the Solidity programming language, built by the Nomic Foundation for the Ethereum community. +]], + default_config = { + root_dir = [[root_pattern("]] .. table.concat(root_files, '", "') .. [[", ".git", "package.json")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/somesass_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/somesass_ls.lua new file mode 100644 index 0000000..710d562 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/somesass_ls.lua @@ -0,0 +1,40 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + name = 'somesass_ls', + cmd = { 'some-sass-language-server', '--stdio' }, + filetypes = { 'scss', 'sass' }, + root_dir = util.root_pattern('.git', '.package.json'), + single_file_support = true, + settings = { + somesass = { + suggestAllFromOpenDocument = true, + }, + }, + }, + docs = { + description = [[ + +https://github.com/wkillerud/some-sass/tree/main/packages/language-server + +`some-sass-language-server` can be installed via `npm`: + +```sh +npm i -g some-sass-language-server +``` + +The language server provides: + +- Full support for @use and @forward, including aliases, prefixes and hiding. +- Workspace-wide code navigation and refactoring, such as Rename Symbol. +- Rich documentation through SassDoc. +- Language features for %placeholder-selectors, both when using them and writing them. +- Suggestions and hover info for built-in Sass modules, when used with @use. + +]], + default_config = { + root_dir = [[root_pattern("package.json", ".git") or bufdir]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sorbet.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sorbet.lua index 86d3443..86d3443 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sorbet.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sorbet.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sourcekit.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sourcekit.lua new file mode 100644 index 0000000..f5ce413 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sourcekit.lua @@ -0,0 +1,25 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'sourcekit-lsp' }, + filetypes = { 'swift', 'c', 'cpp', 'objective-c', 'objective-cpp' }, + root_dir = function(filename, _) + return util.root_pattern 'buildServer.json'(filename) + or util.root_pattern('*.xcodeproj', '*.xcworkspace')(filename) + or util.find_git_ancestor(filename) + -- better to keep it at the end, because some modularized apps contain multiple Package.swift files + or util.root_pattern('compile_commands.json', 'Package.swift')(filename) + end, + }, + docs = { + description = [[ +https://github.com/apple/sourcekit-lsp + +Language server for Swift and C/C++/Objective-C. + ]], + default_config = { + root_dir = [[root_pattern("buildServer.json", "*.xcodeproj", "*.xcworkspace", ".git", "compile_commands.json", "Package.swift")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sourcery.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sourcery.lua new file mode 100644 index 0000000..44340f1 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sourcery.lua @@ -0,0 +1,83 @@ +local util = require 'lspconfig.util' + +local root_files = { + 'pyproject.toml', + 'setup.py', + 'setup.cfg', + 'requirements.txt', + 'Pipfile', + 'pyrightconfig.json', +} + +local token_in_auth_file = function() + local is_windows = vim.fn.has 'win32' == 1 + local path_sep = is_windows and '\\' or '/' + + local config_home = is_windows and vim.fn.getenv 'APPDATA' or vim.fn.expand '~/.config' + local auth_file_path = config_home .. path_sep .. 'sourcery' .. path_sep .. 'auth.yaml' + + if vim.fn.filereadable(auth_file_path) == 1 then + local content = vim.fn.readfile(auth_file_path) + for _, line in ipairs(content) do + if line:match 'sourcery_token: (.+)' then + return true + end + end + end + + return false +end + +return { + default_config = { + cmd = { 'sourcery', 'lsp' }, + filetypes = { 'javascript', 'javascriptreact', 'python', 'typescript', 'typescriptreact' }, + init_options = { + editor_version = 'vim', + extension_version = 'vim.lsp', + token = nil, + }, + root_dir = function(fname) + return util.root_pattern(unpack(root_files))(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + }, + on_new_config = function(new_config, _) + if not new_config.init_options.token and not token_in_auth_file() then + local notify = vim.notify_once or vim.notify + notify( + '[lspconfig] The authentication token must be provided in config.init_options or configured via "sourcery login"', + vim.log.levels.ERROR + ) + end + end, + docs = { + description = [[ +https://github.com/sourcery-ai/sourcery + +Refactor Python instantly using the power of AI. + +It requires the init_options param to be populated as shown below and will respond with the list of ServerCapabilities that it supports: + +```lua +require'lspconfig'.sourcery.setup { + init_options = { + --- The Sourcery token for authenticating the user. + --- This is retrieved from the Sourcery website and must be + --- provided by each user. The extension must provide a + --- configuration option for the user to provide this value. + token = <YOUR_TOKEN>, + + --- The extension's name and version as defined by the extension. + extension_version = 'vim.lsp', + + --- The editor's name and version as defined by the editor. + editor_version = 'vim', + }, +} +``` + +Alternatively, you can login to sourcery by running `sourcery login` with sourcery-cli. +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/spectral.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/spectral.lua index e21b6cb..e21b6cb 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/spectral.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/spectral.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/spyglassmc_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/spyglassmc_language_server.lua new file mode 100644 index 0000000..54d3fad --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/spyglassmc_language_server.lua @@ -0,0 +1,29 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'spyglassmc-language-server', '--stdio' }, + filetypes = { 'mcfunction' }, + root_dir = util.root_pattern 'pack.mcmeta', + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/SpyglassMC/Spyglass/tree/main/packages/language-server + +Language server for Minecraft datapacks. + +`spyglassmc-language-server` can be installed via `npm`: + +```sh +npm i -g @spyglassmc/language-server +``` + +You may also need to configure the filetype: + +`autocmd BufNewFile,BufRead *.mcfunction set filetype=mcfunction` + +This is automatically done by [CrystalAlpha358/vim-mcfunction](https://github.com/CrystalAlpha358/vim-mcfunction), which also provide syntax highlight. +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sqlls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sqlls.lua index 434a7ce..434a7ce 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sqlls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sqlls.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sqls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sqls.lua index 2680253..66ac76c 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/sqls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/sqls.lua @@ -10,7 +10,7 @@ return { }, docs = { description = [[ -https://github.com/lighttiger2505/sqls +https://github.com/sqls-server/sqls ```lua require'lspconfig'.sqls.setup{ @@ -18,7 +18,7 @@ require'lspconfig'.sqls.setup{ ... } ``` -Sqls can be installed via `go get github.com/lighttiger2505/sqls`. Instructions for compiling Sqls from the source can be found at [lighttiger2505/sqls](https://github.com/lighttiger2505/sqls). +Sqls can be installed via `go get github.com/sqls-server/sqls`. Instructions for compiling Sqls from the source can be found at [sqls-server/sqls](https://github.com/sqls-server/sqls). ]], }, diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/standardrb.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/standardrb.lua new file mode 100644 index 0000000..70608bf --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/standardrb.lua @@ -0,0 +1,19 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'standardrb', '--lsp' }, + filetypes = { 'ruby' }, + root_dir = util.root_pattern('Gemfile', '.git'), + }, + docs = { + description = [[ +https://github.com/testdouble/standard + +Ruby Style Guide, with linter & automatic code fixer. + ]], + default_config = { + root_dir = [[root_pattern("Gemfile", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/starlark_rust.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/starlark_rust.lua new file mode 100644 index 0000000..36b828f --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/starlark_rust.lua @@ -0,0 +1,20 @@ +local util = require 'lspconfig/util' + +return { + default_config = { + cmd = { 'starlark', '--lsp' }, + filetypes = { 'star', 'bzl', 'BUILD.bazel' }, + root_dir = util.find_git_ancestor, + }, + docs = { + description = [[ +https://github.com/facebookexperimental/starlark-rust/ +The LSP part of `starlark-rust` is not currently documented, + but the implementation works well for linting. +This gives valuable warnings for potential issues in the code, +but does not support refactorings. + +It can be installed with cargo: https://crates.io/crates/starlark +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/starpls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/starpls.lua new file mode 100644 index 0000000..2699e7e --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/starpls.lua @@ -0,0 +1,16 @@ +local util = require 'lspconfig/util' + +return { + default_config = { + cmd = { 'starpls' }, + filetypes = { 'bzl' }, + root_dir = util.root_pattern('WORKSPACE', 'WORKSPACE.bazel', 'MODULE.bazel'), + }, + docs = { + description = [[ +https://github.com/withered-magic/starpls + +`starpls` is an LSP implementation for Starlark. Installation instructions can be found in the project's README. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/statix.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/statix.lua new file mode 100644 index 0000000..050c0b5 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/statix.lua @@ -0,0 +1,20 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'statix' }, + filetypes = { 'nix' }, + single_file_support = true, + root_dir = util.root_pattern('flake.nix', '.git'), + }, + docs = { + description = [[ +https://github.com/nerdypepper/statix + +lints and suggestions for the nix programming language + ]], + default_config = { + root_dir = [[root_pattern("flake.nix", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/steep.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/steep.lua new file mode 100644 index 0000000..367c780 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/steep.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'steep', 'langserver' }, + filetypes = { 'ruby', 'eruby' }, + root_dir = util.root_pattern('Steepfile', '.git'), + }, + docs = { + description = [[ +https://github.com/soutaro/steep + +`steep` is a static type checker for Ruby. + +You need `Steepfile` to make it work. Generate it with `steep init`. +]], + default_config = { + root_dir = [[root_pattern("Steepfile", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/stimulus_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/stimulus_ls.lua new file mode 100644 index 0000000..7d11b4c --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/stimulus_ls.lua @@ -0,0 +1,26 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'stimulus-language-server', '--stdio' }, + filetypes = { 'html', 'ruby', 'eruby', 'blade', 'php' }, + root_dir = util.root_pattern('Gemfile', '.git'), + }, + docs = { + description = [[ +https://www.npmjs.com/package/stimulus-language-server + +`stimulus-lsp` can be installed via `npm`: + +```sh +npm install -g stimulus-language-server +``` + +or via `yarn`: + +```sh +yarn global add stimulus-language-server +``` +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/stylelint_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/stylelint_lsp.lua index d471d26..fedc1a7 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/stylelint_lsp.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/stylelint_lsp.lua @@ -1,15 +1,21 @@ local util = require 'lspconfig.util' -local bin_name = 'stylelint-lsp' -local cmd = { bin_name, '--stdio' } +local root_file = { + '.stylelintrc', + '.stylelintrc.cjs', + '.stylelintrc.js', + '.stylelintrc.json', + '.stylelintrc.yaml', + '.stylelintrc.yml', + 'stylelint.config.cjs', + 'stylelint.config.js', +} -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end +root_file = util.insert_package_json(root_file, 'stylelint') return { default_config = { - cmd = cmd, + cmd = { 'stylelint-lsp', '--stdio' }, filetypes = { 'css', 'less', @@ -22,7 +28,7 @@ return { 'typescript', 'typescriptreact', }, - root_dir = util.root_pattern('.stylelintrc', 'package.json'), + root_dir = util.root_pattern(unpack(root_file)), settings = {}, }, docs = { @@ -47,8 +53,5 @@ require'lspconfig'.stylelint_lsp.setup{ } ``` ]], - default_config = { - root_dir = [[ root_pattern('.stylelintrc', 'package.json') ]], - }, }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/svelte.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/svelte.lua index 14db192..a08bb95 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/svelte.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/svelte.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'svelteserver' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'svelteserver', '--stdio' }, filetypes = { 'svelte' }, root_dir = util.root_pattern('package.json', '.git'), }, @@ -17,6 +10,8 @@ return { description = [[ https://github.com/sveltejs/language-tools/tree/master/packages/language-server +Note: assuming that [tsserver](#tsserver) is setup, full JavaScript/TypeScript support (find references, rename, etc of symbols in Svelte files when working in JS/TS files) requires per-project installation and configuration of [typescript-svelte-plugin](https://github.com/sveltejs/language-tools/tree/master/packages/typescript-plugin#usage). + `svelte-language-server` can be installed via `npm`: ```sh npm install -g svelte-language-server diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/svlangserver.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/svlangserver.lua new file mode 100644 index 0000000..bc3591a --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/svlangserver.lua @@ -0,0 +1,58 @@ +local util = require 'lspconfig.util' + +local function build_index() + local params = { + command = 'systemverilog.build_index', + } + vim.lsp.buf.execute_command(params) +end + +local function report_hierarchy() + local params = { + command = 'systemverilog.report_hierarchy', + arguments = { vim.fn.expand '<cword>' }, + } + vim.lsp.buf.execute_command(params) +end + +return { + default_config = { + cmd = { 'svlangserver' }, + filetypes = { 'verilog', 'systemverilog' }, + root_dir = function(fname) + return util.root_pattern '.svlangserver'(fname) or util.find_git_ancestor(fname) + end, + single_file_support = true, + settings = { + systemverilog = { + includeIndexing = { '*.{v,vh,sv,svh}', '**/*.{v,vh,sv,svh}' }, + }, + }, + }, + commands = { + SvlangserverBuildIndex = { + build_index, + description = 'Instructs language server to rerun indexing', + }, + SvlangserverReportHierarchy = { + report_hierarchy, + description = 'Generates hierarchy for the given module', + }, + }, + docs = { + description = [[ +https://github.com/imc-trading/svlangserver + +Language server for SystemVerilog. + +`svlangserver` can be installed via `npm`: + +```sh +$ npm install -g @imc-trading/svlangserver +``` +]], + default_config = { + root_dir = [[root_pattern(".svlangserver", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/svls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/svls.lua index ff4d810..ff4d810 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/svls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/svls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/swift_mesonls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/swift_mesonls.lua new file mode 100644 index 0000000..5197f73 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/swift_mesonls.lua @@ -0,0 +1,19 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'Swift-MesonLSP', '--lsp' }, + filetypes = { 'meson' }, + root_dir = util.root_pattern('meson_options.txt', 'meson.options', '.git'), + }, + docs = { + description = [[ +https://github.com/JCWasmx86/Swift-MesonLSP + +Meson language server written in Swift +]], + default_config = { + root_dir = [[util.root_pattern("meson_options.txt", "meson.options", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/syntax_tree.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/syntax_tree.lua new file mode 100644 index 0000000..9b47ee5 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/syntax_tree.lua @@ -0,0 +1,28 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'stree', 'lsp' }, + filetypes = { 'ruby' }, + root_dir = util.root_pattern('.streerc', 'Gemfile', '.git'), + }, + docs = { + description = [[ +https://ruby-syntax-tree.github.io/syntax_tree/ + +A fast Ruby parser and formatter. + +Syntax Tree is a suite of tools built on top of the internal CRuby parser. It +provides the ability to generate a syntax tree from source, as well as the +tools necessary to inspect and manipulate that syntax tree. It can be used to +build formatters, linters, language servers, and more. + +```sh +gem install syntax_tree +``` + ]], + default_config = { + root_dir = [[root_pattern(".streerc", "Gemfile", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tabby_ml.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tabby_ml.lua new file mode 100644 index 0000000..f56a829 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tabby_ml.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'tabby-agent', '--lsp', '--stdio' }, + filetypes = {}, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://tabby.tabbyml.com/blog/running-tabby-as-a-language-server + +Language server for Tabby, an opensource, self-hosted AI coding assistant. + +`tabby-agent` can be installed via `npm`: + +```sh +npm install --global tabby-agent +``` +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/tailwindcss.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tailwindcss.lua index 5a5abc0..88c95ba 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/tailwindcss.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tailwindcss.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'tailwindcss-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'tailwindcss-language-server', '--stdio' }, -- filetypes copied and adjusted from tailwindcss-intellisense filetypes = { -- html @@ -17,14 +10,17 @@ return { 'astro', 'astro-markdown', 'blade', + 'clojure', 'django-html', 'htmldjango', 'edge', 'eelixir', -- vim ft + 'elixir', 'ejs', 'erb', 'eruby', -- vim ft 'gohtml', + 'gohtmltmpl', 'haml', 'handlebars', 'hbs', @@ -63,11 +59,13 @@ return { -- mixed 'vue', 'svelte', + 'templ', }, init_options = { userLanguages = { eelixir = 'html-eex', eruby = 'erb', + templ = 'html', }, }, settings = { @@ -85,6 +83,7 @@ return { classAttributes = { 'class', 'className', + 'class:list', 'classList', 'ngClass', }, @@ -103,11 +102,18 @@ return { end end, root_dir = function(fname) - return util.root_pattern('tailwind.config.js', 'tailwind.config.ts')(fname) - or util.root_pattern('postcss.config.js', 'postcss.config.ts')(fname) - or util.find_package_json_ancestor(fname) - or util.find_node_modules_ancestor(fname) - or util.find_git_ancestor(fname) + return util.root_pattern( + 'tailwind.config.js', + 'tailwind.config.cjs', + 'tailwind.config.mjs', + 'tailwind.config.ts', + 'postcss.config.js', + 'postcss.config.cjs', + 'postcss.config.mjs', + 'postcss.config.ts' + )(fname) or util.find_package_json_ancestor(fname) or util.find_node_modules_ancestor(fname) or util.find_git_ancestor( + fname + ) end, }, docs = { @@ -120,7 +126,7 @@ npm install -g @tailwindcss/language-server ``` ]], default_config = { - root_dir = [[root_pattern('tailwind.config.js', 'tailwind.config.ts', 'postcss.config.js', 'postcss.config.ts', 'package.json', 'node_modules', '.git')]], + root_dir = [[root_pattern('tailwind.config.js', 'tailwind.config.cjs', 'tailwind.config.mjs', 'tailwind.config.ts', 'postcss.config.js', 'postcss.config.cjs', 'postcss.config.mjs', 'postcss.config.ts', 'package.json', 'node_modules', '.git')]], }, }, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/taplo.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/taplo.lua index 320ced9..e1a9353 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/taplo.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/taplo.lua @@ -11,13 +11,13 @@ return { }, docs = { description = [[ -https://taplo.tamasfe.dev/lsp/ +https://taplo.tamasfe.dev/cli/usage/language-server.html Language server for Taplo, a TOML toolkit. `taplo-cli` can be installed via `cargo`: ```sh -cargo install --locked taplo-cli +cargo install --features lsp --locked taplo-cli ``` ]], default_config = { diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tblgen_lsp_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tblgen_lsp_server.lua new file mode 100644 index 0000000..73022d4 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tblgen_lsp_server.lua @@ -0,0 +1,20 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'tblgen-lsp-server' }, + filetypes = { 'tablegen' }, + root_dir = function(fname) + return util.root_pattern 'tablegen_compile_commands.yml'(fname) or util.find_git_ancestor(fname) + end, + }, + docs = { + description = [[ +https://mlir.llvm.org/docs/Tools/MLIRLSP/#tablegen-lsp-language-server--tblgen-lsp-server + +The Language Server for the LLVM TableGen language + +`tblgen-lsp-server` can be installed at the llvm-project repository (https://github.com/llvm/llvm-project) +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/teal_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/teal_ls.lua index b554add..b554add 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/teal_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/teal_ls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/templ.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/templ.lua new file mode 100644 index 0000000..99a4ada --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/templ.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'templ', 'lsp' }, + filetypes = { 'templ' }, + root_dir = function(fname) + return util.root_pattern('go.work', 'go.mod', '.git')(fname) + end, + }, + docs = { + description = [[ +https://templ.guide + +The official language server for the templ HTML templating language. +]], + default_config = { + root_dir = [[root_pattern('go.work', 'go.mod', '.git')]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/terraform_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/terraform_lsp.lua index 48a6fc5..48a6fc5 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/terraform_lsp.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/terraform_lsp.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/terraformls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/terraformls.lua index 3eb4a1c..9326b9b 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/terraformls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/terraformls.lua @@ -3,7 +3,7 @@ local util = require 'lspconfig.util' return { default_config = { cmd = { 'terraform-ls', 'serve' }, - filetypes = { 'terraform' }, + filetypes = { 'terraform', 'terraform-vars' }, root_dir = util.root_pattern('.terraform', '.git'), }, docs = { @@ -34,6 +34,11 @@ choice: - compatibility with a single particular Terraform (0.12.20 at time of writing) - configs designed for other 0.12 versions may work, but interpretation may be inaccurate - less stability (due to reliance on Terraform's own internal packages) + +Note, that the `settings` configuration option uses the `workspace/didChangeConfiguration` event, +[which is not supported by terraform-ls](https://github.com/hashicorp/terraform-ls/blob/main/docs/features.md). +Instead you should use `init_options` which passes the settings as part of the LSP initialize call +[as is required by terraform-ls](https://github.com/hashicorp/terraform-ls/blob/main/docs/SETTINGS.md#how-to-pass-settings). ]], default_config = { root_dir = [[root_pattern(".terraform", ".git")]], diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/texlab.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/texlab.lua index 88bfa20..36198d0 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/texlab.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/texlab.lua @@ -1,24 +1,26 @@ local util = require 'lspconfig.util' -local texlab_build_status = vim.tbl_add_reverse_lookup { - Success = 0, - Error = 1, - Failure = 2, - Cancelled = 3, +local texlab_build_status = { + [0] = 'Success', + [1] = 'Error', + [2] = 'Failure', + [3] = 'Cancelled', } -local texlab_forward_status = vim.tbl_add_reverse_lookup { - Success = 0, - Error = 1, - Failure = 2, - Unconfigured = 3, +local texlab_forward_status = { + [0] = 'Success', + [1] = 'Error', + [2] = 'Failure', + [3] = 'Unconfigured', } local function buf_build(bufnr) bufnr = util.validate_bufnr(bufnr) local texlab_client = util.get_active_client_by_name(bufnr, 'texlab') + local pos = vim.api.nvim_win_get_cursor(0) local params = { textDocument = { uri = vim.uri_from_bufnr(bufnr) }, + position = { line = pos[1] - 1, character = pos[2] }, } if texlab_client then texlab_client.request('textDocument/build', params, function(err, result) @@ -35,9 +37,10 @@ end local function buf_search(bufnr) bufnr = util.validate_bufnr(bufnr) local texlab_client = util.get_active_client_by_name(bufnr, 'texlab') + local pos = vim.api.nvim_win_get_cursor(0) local params = { textDocument = { uri = vim.uri_from_bufnr(bufnr) }, - position = { line = vim.fn.line '.' - 1, character = vim.fn.col '.' }, + position = { line = pos[1] - 1, character = pos[2] }, } if texlab_client then texlab_client.request('textDocument/forwardSearch', params, function(err, result) @@ -66,10 +69,8 @@ end return { default_config = { cmd = { 'texlab' }, - filetypes = { 'tex', 'bib' }, - root_dir = function(fname) - return util.root_pattern '.latexmkrc'(fname) or util.find_git_ancestor(fname) - end, + filetypes = { 'tex', 'plaintex', 'bib' }, + root_dir = util.root_pattern('.git', '.latexmkrc', '.texlabroot', 'texlabroot', 'Tectonic.toml'), single_file_support = true, settings = { texlab = { @@ -120,7 +121,7 @@ https://github.com/latex-lsp/texlab A completion engine built from scratch for (La)TeX. -See https://github.com/latex-lsp/texlab/blob/master/docs/options.md for configuration options. +See https://github.com/latex-lsp/texlab/wiki/Configuration for configuration options. ]], }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/textlsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/textlsp.lua new file mode 100644 index 0000000..e4f7a91 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/textlsp.lua @@ -0,0 +1,50 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'textlsp' }, + filetypes = { 'text', 'tex', 'org' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + settings = { + textLSP = { + analysers = { + -- by default all analysers are disabled in textLSP, since many of them + -- need custom settings. See github page. LanguageTool is enaled here + -- only for a quick test. + languagetool = { + enabled = true, + check_text = { + on_open = true, + on_save = true, + on_change = false, + }, + }, + }, + documents = { + org = { + org_todo_keywords = { + 'TODO', + 'IN_PROGRESS', + 'DONE', + }, + }, + }, + }, + }, + }, + docs = { + description = [[ +https://github.com/hangyav/textLSP + +`textLSP` is an LSP server for text spell and grammar checking with various AI tools. +It supports multiple text file formats, such as LaTeX, Org or txt. + +For the available text analyzer tools and their configuration, see the [GitHub](https://github.com/hangyav/textLSP) page. +By default, all analyzers are disabled in textLSP, since most of them need special settings. +For quick testing, LanguageTool is enabled in the default `nvim-lspconfig` configuration. + +To install run: `pip install textLSP` +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/tflint.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tflint.lua index de2a1d8..de2a1d8 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/tflint.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tflint.lua diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/theme_check.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/theme_check.lua index 94d6774..94d6774 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/theme_check.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/theme_check.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/thriftls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/thriftls.lua new file mode 100644 index 0000000..eaf807a --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/thriftls.lua @@ -0,0 +1,20 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'thriftls' }, + filetypes = { 'thrift' }, + root_dir = util.root_pattern '.thrift', + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/joyme123/thrift-ls + +you can install thriftls by mason or download binary here: https://github.com/joyme123/thrift-ls/releases +]], + default_config = { + root_dir = [[root_pattern(".thrift")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tilt_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tilt_ls.lua new file mode 100644 index 0000000..c665651 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tilt_ls.lua @@ -0,0 +1,26 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'tilt', 'lsp', 'start' }, + filetypes = { 'tiltfile' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/tilt-dev/tilt + +Tilt language server. + +You might need to add filetype detection manually: + +```vim +autocmd BufRead Tiltfile setf=tiltfile +``` +]], + default_config = { + root_dir = [[root_pattern(".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tinymist.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tinymist.lua new file mode 100644 index 0000000..c255972 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tinymist.lua @@ -0,0 +1,16 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'tinymist' }, + filetypes = { 'typst' }, + root_dir = util.find_git_ancestor, + single_file_support = false, + }, + docs = { + description = [[ +https://github.com/Myriad-Dreamin/tinymist +An integrated language service for Typst [taɪpst]. You can also call it "微霭" [wēi ǎi] in Chinese. + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tsp_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tsp_server.lua new file mode 100644 index 0000000..3cb7e42 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tsp_server.lua @@ -0,0 +1,24 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'tsp-server', '--stdio' }, + filetypes = { 'typespec' }, + root_dir = util.root_pattern('tspconfig.yaml', '.git'), + }, + docs = { + description = [[ +https://github.com/microsoft/typespec + +The language server for TypeSpec, a language for defining cloud service APIs and shapes. + +`tsp-server` can be installed together with the typespec compiler via `npm`: +```sh +npm install -g @typespec/compiler +``` +]], + default_config = { + root_dir = [[util.root_pattern("tspconfig.yaml", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tsserver.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tsserver.lua new file mode 100644 index 0000000..b5fa5a4 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/tsserver.lua @@ -0,0 +1,88 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + init_options = { hostInfo = 'neovim' }, + cmd = { 'typescript-language-server', '--stdio' }, + filetypes = { + 'javascript', + 'javascriptreact', + 'javascript.jsx', + 'typescript', + 'typescriptreact', + 'typescript.tsx', + }, + root_dir = util.root_pattern('tsconfig.json', 'package.json', 'jsconfig.json', '.git'), + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/typescript-language-server/typescript-language-server + +`typescript-language-server` depends on `typescript`. Both packages can be installed via `npm`: +```sh +npm install -g typescript typescript-language-server +``` + +To configure typescript language server, add a +[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or +[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your +project. + +Here's an example that disables type checking in JavaScript files. + +```json +{ + "compilerOptions": { + "module": "commonjs", + "target": "es6", + "checkJs": false + }, + "exclude": [ + "node_modules" + ] +} +``` + +### Vue support + +As of 2.0.0, Volar no longer supports TypeScript itself. Instead, a plugin +adds Vue support to this language server. + +*IMPORTANT*: It is crucial to ensure that `@vue/typescript-plugin` and `volar `are of identical versions. + +```lua +require'lspconfig'.tsserver.setup{ + init_options = { + plugins = { + { + name = "@vue/typescript-plugin", + location = "/usr/local/lib/node_modules/@vue/typescript-plugin", + languages = {"javascript", "typescript", "vue"}, + }, + }, + }, + filetypes = { + "javascript", + "typescript", + "vue", + }, +} + +-- You must make sure volar is setup +-- e.g. require'lspconfig'.volar.setup{} +-- See volar's section for more information +``` + +`location` MUST be defined. If the plugin is installed in `node_modules`, +`location` can have any value. + +`languages` must include `vue` even if it is listed in `filetypes`. + +`filetypes` is extended here to include Vue SFC. +]], + default_config = { + root_dir = [[root_pattern("tsconfig.json", "package.json", "jsconfig.json", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ttags.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ttags.lua new file mode 100644 index 0000000..d57a796 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/ttags.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'ttags', 'lsp' }, + filetypes = { 'ruby', 'rust', 'javascript', 'haskell' }, + root_dir = util.root_pattern '.git', + }, + docs = { + description = [[ +https://github.com/npezza93/ttags + ]], + default_config = { + root_dir = [[root_pattern(".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/turtle_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/turtle_ls.lua new file mode 100644 index 0000000..21624a8 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/turtle_ls.lua @@ -0,0 +1,45 @@ +local util = require 'lspconfig.util' + +local bin_name = 'turtle-language-server' +local bin_path = os.getenv 'NVM_BIN' +local full_path +if bin_path == nil then + local paths = {} + local sep = ':' + if vim.fn.has 'win32' == 1 then + sep = ';' + end + local path = os.getenv 'PATH' + if path ~= nil then + for str in string.gmatch(path, '([^' .. sep .. ']+)') do + paths[#paths + 1] = str + end + end + for _, p in ipairs(paths) do + local candidate = util.path.join(p, bin_name) + if util.path.is_file(candidate) then + full_path = candidate + break + end + end +else + full_path = util.path.join(bin_path, bin_name) +end + +return { + default_config = { + cmd = { 'node', full_path, '--stdio' }, + filetypes = { 'turtle', 'ttl' }, + root_dir = function(fname) + return util.find_git_ancestor(fname) + end, + }, + docs = { + description = [[ +https://github.com/stardog-union/stardog-language-servers/tree/master/packages/turtle-language-server +`turtle-language-server`, An editor-agnostic server providing language intelligence (diagnostics, hover tooltips, etc.) for the W3C standard Turtle RDF syntax via the Language Server Protocol. +installable via npm install -g turtle-language-server or yarn global add turtle-language-server. +requires node. +]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/twiggy_language_server.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/twiggy_language_server.lua new file mode 100644 index 0000000..3c949dd --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/twiggy_language_server.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'twiggy-language-server', '--stdio' }, + filetypes = { 'twig' }, + root_dir = util.root_pattern('composer.json', '.git'), + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/moetelo/twiggy + +`twiggy-language-server` can be installed via `npm`: +```sh +npm install -g twiggy-language-server +``` +]], + default_config = { + root_dir = [[root_pattern("composer.json", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/typeprof.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/typeprof.lua index ab9dc8e..ab9dc8e 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/typeprof.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/typeprof.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/typos_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/typos_lsp.lua new file mode 100644 index 0000000..e5cca49 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/typos_lsp.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'typos-lsp' }, + filetypes = { '*' }, + root_dir = util.root_pattern('typos.toml', '_typos.toml', '.typos.toml'), + single_file_support = true, + settings = {}, + }, + docs = { + description = [[ +https://github.com/crate-ci/typos +https://github.com/tekumara/typos-lsp + +A Language Server Protocol implementation for Typos, a low false-positive +source code spell checker, written in Rust. Download it from the releases page +on GitHub: https://github.com/tekumara/typos-lsp/releases + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/typst_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/typst_lsp.lua new file mode 100644 index 0000000..4d8ec17 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/typst_lsp.lua @@ -0,0 +1,19 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'typst-lsp' }, + filetypes = { 'typst' }, + single_file_support = true, + root_dir = function(fname) + return util.find_git_ancestor(fname) + end, + }, + docs = { + description = [[ +https://github.com/nvarner/typst-lsp + +Language server for Typst. + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/uiua.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/uiua.lua new file mode 100644 index 0000000..b102f8c --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/uiua.lua @@ -0,0 +1,31 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'uiua', 'lsp' }, + filetypes = { 'uiua' }, + root_dir = function(fname) + return util.root_pattern('main.ua', '.fmt.ua')(fname) or util.find_git_ancestor(fname) + end, + }, + docs = { + description = [[ +https://github.com/uiua-lang/uiua/ + +The builtin language server of the Uiua interpreter. + +The Uiua interpreter can be installed with `cargo install uiua` +]], + default_config = { + cmd = { 'uiua', 'lsp' }, + filetypes = { 'uiua' }, + root_dir = [[ + root_pattern( + 'main.ua', + 'fmt.ua', + '.git' + ) + ]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/unison.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/unison.lua new file mode 100644 index 0000000..7cc655f --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/unison.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'nc', 'localhost', os.getenv 'UNISON_LSP_PORT' or '5757' }, + filetypes = { 'unison' }, + root_dir = util.root_pattern '*.u', + settings = {}, + }, + docs = { + description = [[ +https://github.com/unisonweb/unison/blob/trunk/docs/language-server.markdown + + + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/unocss.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/unocss.lua new file mode 100644 index 0000000..4b15513 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/unocss.lua @@ -0,0 +1,31 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'unocss-language-server', '--stdio' }, + filetypes = { + 'html', + 'javascriptreact', + 'rescript', + 'typescriptreact', + 'vue', + 'svelte', + }, + root_dir = function(fname) + return util.root_pattern('unocss.config.js', 'unocss.config.ts', 'uno.config.js', 'uno.config.ts')(fname) + end, + }, + docs = { + description = [[ +https://github.com/xna00/unocss-language-server + +UnoCSS Language Server can be installed via npm: +```sh +npm i unocss-language-server -g +``` +]], + default_config = { + root_dir = [[root_pattern('unocss.config.js', 'unocss.config.ts', 'uno.config.js', 'uno.config.ts')]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/uvls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/uvls.lua new file mode 100644 index 0000000..c8d75b1 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/uvls.lua @@ -0,0 +1,29 @@ +local util = require 'lspconfig.util' +return { + default_config = { + cmd = { 'uvls' }, + filetypes = { 'uvl' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://codeberg.org/caradhras/uvls +Language server for UVL, written using tree sitter and rust. +You can install the server easily using cargo: +```sh +git clone https://codeberg.org/caradhras/uvls +cd uvls +cargo install --path . +``` +Note: To activate properly nvim needs to know the uvl filetype. +You can add it via: +```lua +vim.cmd(\[\[au BufRead,BufNewFile *.uvl setfiletype uvl\]\]) +``` +]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/v_analyzer.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/v_analyzer.lua new file mode 100644 index 0000000..d389259 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/v_analyzer.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'v-analyzer' }, + filetypes = { 'v', 'vsh', 'vv' }, + root_dir = util.root_pattern('v.mod', '.git'), + }, + docs = { + description = [[ +https://github.com/v-analyzer/v-analyzer + +V language server. + +`v-analyzer` can be installed by following the instructions [here](https://github.com/v-analyzer/v-analyzer#installation). +]], + default_config = { + root_dir = [[root_pattern("v.mod", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vacuum.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vacuum.lua new file mode 100644 index 0000000..d0a6afc --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vacuum.lua @@ -0,0 +1,28 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'vacuum', 'language-server' }, + filetypes = { 'yaml.openapi', 'json.openapi' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +Vacuum is the worlds fastest OpenAPI 3, OpenAPI 2 / Swagger linter and quality analysis tool. + +You can install vacuum using mason or follow the instructions here: https://github.com/daveshanley/vacuum + +The file types are not detected automatically, you can register them manually (see below) or override the filetypes: + +```lua +vim.filetype.add { + pattern = { + ['openapi.*%.ya?ml'] = 'yaml.openapi', + ['openapi.*%.json'] = 'json.openapi', + }, +} +``` +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vala_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vala_ls.lua index 842c561..842c561 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vala_ls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vala_ls.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vale_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vale_ls.lua new file mode 100644 index 0000000..615b18b --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vale_ls.lua @@ -0,0 +1,17 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'vale-ls' }, + filetypes = { 'markdown', 'text', 'tex' }, + root_dir = util.root_pattern '.vale.ini', + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/errata-ai/vale-ls + +An implementation of the Language Server Protocol (LSP) for the Vale command-line tool. +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vdmj.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vdmj.lua index 9699b93..865e263 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vdmj.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vdmj.lua @@ -1,6 +1,13 @@ local util = require 'lspconfig.util' -local mavenrepo = util.path.join(vim.env.HOME, '.m2', 'repository', 'com', 'fujitsu') +local function get_default_mavenrepo() + local repo = util.path.join(vim.env.HOME, '.m2', 'repository', 'dk', 'au', 'ece', 'vdmj') + if util.path.exists(repo) then + return repo + else + return util.path.join(vim.env.HOME, '.m2', 'repository', 'com', 'fujitsu') + end +end local function get_jar_path(config, package, version) return util.path.join(config.options.mavenrepo, package, version, package .. '-' .. version .. '.jar') @@ -44,8 +51,7 @@ return { java = vim.env.JAVA_HOME and util.path.join(vim.env.JAVA_HOME, 'bin', 'java') or 'java', java_opts = { '-Xmx3000m', '-Xss1m' }, annotation_paths = {}, - mavenrepo = mavenrepo, - version = get_latest_installed_version(mavenrepo), + mavenrepo = get_default_mavenrepo(), logfile = util.path.join(vim.fn.stdpath 'cache', 'vdm-lsp.log'), debugger_port = -1, high_precision = false, @@ -80,7 +86,7 @@ by neovim. java = '$JAVA_HOME/bin/java', java_opts = { '-Xmx3000m', '-Xss1m' }, annotation_paths = {}, - mavenrepo = '$HOME/.m2/repository/com/fujitsu', + mavenrepo = '$HOME/.m2/repository/dk/au/ece/vdmj', version = 'The latest version installed in `mavenrepo`', logfile = "path.join(vim.fn.stdpath 'cache', 'vdm-lsp.log')", debugger_port = -1, @@ -123,6 +129,6 @@ by neovim. dap, } - config.cmd = vim.tbl_flatten { java_cmd, vdmj_cmd } + config.cmd = util.tbl_flatten { java_cmd, vdmj_cmd } end, } diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/verible.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/verible.lua index 3c4823a..3c4823a 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/verible.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/verible.lua diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/veridian.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/veridian.lua new file mode 100644 index 0000000..231d0c0 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/veridian.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'veridian' }, + filetypes = { 'systemverilog', 'verilog' }, + root_dir = util.find_git_ancestor, + }, + docs = { + description = [[ +https://github.com/vivekmalneedi/veridian + +A SystemVerilog LanguageServer. + +Download the latest release for your OS from the releases page + +# install with slang feature, if C++17 compiler is available +cargo install --git https://github.com/vivekmalneedi/veridian.git --all-features +# install if C++17 compiler is not available +cargo install --git https://github.com/vivekmalneedi/veridian.git + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/veryl_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/veryl_ls.lua new file mode 100644 index 0000000..588e36e --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/veryl_ls.lua @@ -0,0 +1,24 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'veryl-ls' }, + filetypes = { 'veryl' }, + root_dir = util.find_git_ancestor, + }, + docs = { + description = [[ +https://github.com/veryl-lang/veryl + +Language server for Veryl + +`veryl-ls` can be installed via `cargo`: + ```sh + cargo install veryl-ls + ``` + ]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vhdl_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vhdl_ls.lua new file mode 100644 index 0000000..46db3c8 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vhdl_ls.lua @@ -0,0 +1,45 @@ +local util = require 'lspconfig.util' + +local root_files = { + 'vhdl_ls.toml', + '.vhdl_ls.toml', +} + +return { + default_config = { + cmd = { 'vhdl_ls' }, + filetypes = { 'vhd', 'vhdl' }, + root_dir = util.root_pattern(unpack(root_files)), + single_file_support = true, + }, + docs = { + description = [[ +Install vhdl_ls from https://github.com/VHDL-LS/rust_hdl and add it to path + +Configuration + +The language server needs to know your library mapping to perform full analysis of the code. For this it uses a configuration file in the TOML format named vhdl_ls.toml. + +vhdl_ls will load configuration files in the following order of priority (first to last): + + A file named .vhdl_ls.toml in the user home folder. + A file name from the VHDL_LS_CONFIG environment variable. + A file named vhdl_ls.toml in the workspace root. + +Settings in a later files overwrites those from previously loaded files. + +Example vhdl_ls.toml +``` +# File names are either absolute or relative to the parent folder of the vhdl_ls.toml file +[libraries] +lib2.files = [ + 'pkg2.vhd', +] +lib1.files = [ + 'pkg1.vhd', + 'tb_ent.vhd' +] +``` +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vimls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vimls.lua index 4f0d1d9..bcee4cc 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vimls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vimls.lua @@ -1,20 +1,13 @@ local util = require 'lspconfig.util' -local bin_name = 'vim-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, + cmd = { 'vim-language-server', '--stdio' }, filetypes = { 'vim' }, - root_dir = function(fname) - return util.find_git_ancestor(fname) or vim.fn.getcwd() - end, + root_dir = util.find_git_ancestor, + single_file_support = true, init_options = { + isNeovim = true, iskeyword = '@,48-57,_,192-255,-#', vimruntime = '', runtimepath = '', diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/visualforce_ls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/visualforce_ls.lua new file mode 100644 index 0000000..c48bcaa --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/visualforce_ls.lua @@ -0,0 +1,38 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + filetypes = { 'visualforce' }, + root_dir = util.root_pattern 'sfdx-project.json', + init_options = { + embeddedLanguages = { + css = true, + javascript = true, + }, + }, + }, + docs = { + description = [[ +https://github.com/forcedotcom/salesforcedx-vscode + +Language server for Visualforce. + +For manual installation, download the .vsix archive file from the +[forcedotcom/salesforcedx-vscode](https://github.com/forcedotcom/salesforcedx-vscode) +GitHub releases. Then, configure `cmd` to run the Node script at the unpacked location: + +```lua +require'lspconfig'.visualforce_ls.setup { + cmd = { + 'node', + '/path/to/unpacked/archive/extension/node_modules/@salesforce/salesforcedx-visualforce-language-server/out/src/visualforceServer.js', + '--stdio' + } +} +``` +]], + default_config = { + root_dir = [[root_pattern('sfdx-project.json')]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vls.lua new file mode 100644 index 0000000..a6a5ac4 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vls.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'v', 'ls' }, + filetypes = { 'v', 'vlang' }, + root_dir = util.root_pattern('v.mod', '.git'), + }, + docs = { + description = [[ +https://github.com/vlang/vls + +V language server. + +`v-language-server` can be installed by following the instructions [here](https://github.com/vlang/vls#installation). +]], + default_config = { + root_dir = [[root_pattern("v.mod", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/volar.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/volar.lua new file mode 100644 index 0000000..4875b1f --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/volar.lua @@ -0,0 +1,113 @@ +local util = require 'lspconfig.util' + +local function get_typescript_server_path(root_dir) + local project_root = util.find_node_modules_ancestor(root_dir) + return project_root and (util.path.join(project_root, 'node_modules', 'typescript', 'lib')) or '' +end + +-- https://github.com/johnsoncodehk/volar/blob/20d713b/packages/shared/src/types.ts +local volar_init_options = { + typescript = { + tsdk = '', + }, +} + +return { + default_config = { + cmd = { 'vue-language-server', '--stdio' }, + filetypes = { 'vue' }, + root_dir = util.root_pattern 'package.json', + init_options = volar_init_options, + on_new_config = function(new_config, new_root_dir) + if + new_config.init_options + and new_config.init_options.typescript + and new_config.init_options.typescript.tsdk == '' + then + new_config.init_options.typescript.tsdk = get_typescript_server_path(new_root_dir) + end + end, + }, + docs = { + description = [[ +https://github.com/johnsoncodehk/volar/tree/20d713b/packages/vue-language-server + +Volar language server for Vue + +Volar can be installed via npm: + +```sh +npm install -g @vue/language-server +``` + +Volar by default supports Vue 3 projects. Vue 2 projects need +[additional configuration](https://github.com/vuejs/language-tools/tree/master/packages/vscode-vue#usage). + +**TypeScript support** +As of release 2.0.0, Volar no longer wraps around tsserver. For typescript +support, `tsserver` needs to be configured with the `@vue/typescript-plugin` +plugin. + +**Take Over Mode** + +Volar (prior to 2.0.0), can serve as a language server for both Vue and TypeScript via [Take Over Mode](https://github.com/johnsoncodehk/volar/discussions/471). + +To enable Take Over Mode, override the default filetypes in `setup{}` as follows: + +```lua +require'lspconfig'.volar.setup{ + filetypes = {'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue', 'json'} +} +``` + +**Overriding the default TypeScript Server used by Volar** + +The default config looks for TS in the local `node_modules`. This can lead to issues +e.g. when working on a [monorepo](https://monorepo.tools/). The alternatives are: + +- use a global TypeScript Server installation + +```lua +require'lspconfig'.volar.setup{ + init_options = { + typescript = { + tsdk = '/path/to/.npm/lib/node_modules/typescript/lib' + -- Alternative location if installed as root: + -- tsdk = '/usr/local/lib/node_modules/typescript/lib' + } + } +} +``` + +- use a local server and fall back to a global TypeScript Server installation + +```lua +local util = require 'lspconfig.util' +local function get_typescript_server_path(root_dir) + + local global_ts = '/home/[yourusernamehere]/.npm/lib/node_modules/typescript/lib' + -- Alternative location if installed as root: + -- local global_ts = '/usr/local/lib/node_modules/typescript/lib' + local found_ts = '' + local function check_dir(path) + found_ts = util.path.join(path, 'node_modules', 'typescript', 'lib') + if util.path.exists(found_ts) then + return path + end + end + if util.search_ancestors(root_dir, check_dir) then + return found_ts + else + return global_ts + end +end + +require'lspconfig'.volar.setup{ + on_new_config = function(new_config, new_root_dir) + new_config.init_options.typescript.tsdk = get_typescript_server_path(new_root_dir) + end, +} +``` + ]], + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vtsls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vtsls.lua new file mode 100644 index 0000000..050052f --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vtsls.lua @@ -0,0 +1,35 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'vtsls', '--stdio' }, + filetypes = { + 'javascript', + 'javascriptreact', + 'javascript.jsx', + 'typescript', + 'typescriptreact', + 'typescript.tsx', + }, + root_dir = util.root_pattern('tsconfig.json', 'package.json', 'jsconfig.json', '.git'), + single_file_support = true, + }, + docs = { + description = [[ +https://github.com/yioneko/vtsls + +`vtsls` can be installed with npm: +```sh +npm install -g @vtsls/language-server +``` + +To configure a TypeScript project, add a +[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) +or [`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to +the root of your project. +]], + default_config = { + root_dir = [[root_pattern("tsconfig.json", "package.json", "jsconfig.json", ".git")]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vuels.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vuels.lua index d3d2d92..34d0f28 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/vuels.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/vuels.lua @@ -1,15 +1,8 @@ local util = require 'lspconfig.util' -local bin_name = 'vls' -local cmd = { bin_name } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name } -end - return { default_config = { - cmd = cmd, + cmd = { 'vls' }, filetypes = { 'vue' }, root_dir = util.root_pattern('package.json', 'vue.config.js'), init_options = { diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/wgsl_analyzer.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/wgsl_analyzer.lua new file mode 100644 index 0000000..cf8913d --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/wgsl_analyzer.lua @@ -0,0 +1,23 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'wgsl_analyzer' }, + filetypes = { 'wgsl' }, + root_dir = util.root_pattern '.git', + settings = {}, + }, + docs = { + description = [[ +https://github.com/wgsl-analyzer/wgsl-analyzer + +`wgsl_analyzer` can be installed via `cargo`: +```sh +cargo install --git https://github.com/wgsl-analyzer/wgsl-analyzer wgsl_analyzer +``` +]], + default_config = { + root_dir = [[root_pattern(".git"]], + }, + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/yamlls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/yamlls.lua index 52d8e6f..3756e62 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/yamlls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/yamlls.lua @@ -1,16 +1,9 @@ local util = require 'lspconfig.util' -local bin_name = 'yaml-language-server' -local cmd = { bin_name, '--stdio' } - -if vim.fn.has 'win32' == 1 then - cmd = { 'cmd.exe', '/C', bin_name, '--stdio' } -end - return { default_config = { - cmd = cmd, - filetypes = { 'yaml', 'yaml.docker-compose' }, + cmd = { 'yaml-language-server', '--stdio' }, + filetypes = { 'yaml', 'yaml.docker-compose', 'yaml.gitlab' }, root_dir = util.find_git_ancestor, single_file_support = true, settings = { @@ -49,9 +42,9 @@ require('lspconfig').yamlls.setup { yaml = { ... -- other settings. note this overrides the lspconfig defaults. schemas = { - ["https://json.schemastore.org/github-workflow.json"] = "/.github/workflows/*" - ["../path/relative/to/file.yml"] = "/.github/workflows/*" - ["/path/from/root/of/project"] = "/.github/workflows/*" + ["https://json.schemastore.org/github-workflow.json"] = "/.github/workflows/*", + ["../path/relative/to/file.yml"] = "/.github/workflows/*", + ["/path/from/root/of/project"] = "/.github/workflows/*", }, }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/yang_lsp.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/yang_lsp.lua new file mode 100644 index 0000000..d4c9b8b --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/yang_lsp.lua @@ -0,0 +1,19 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'yang-language-server' }, + filetypes = { 'yang' }, + root_dir = util.find_git_ancestor, + }, + docs = { + description = [[ +https://github.com/TypeFox/yang-lsp + +A Language Server for the YANG data modeling language. +]], + default_config = { + root_dir = [[util.find_git_ancestor]], + }, + }, +} diff --git a/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/yls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/yls.lua new file mode 100644 index 0000000..86cb337 --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/yls.lua @@ -0,0 +1,21 @@ +local util = require 'lspconfig.util' + +return { + default_config = { + cmd = { 'yls', '-vv' }, + filetypes = { 'yar', 'yara' }, + root_dir = util.find_git_ancestor, + single_file_support = true, + }, + docs = { + description = [[ +https://pypi.org/project/yls-yara/ + +An YLS plugin adding YARA linting capabilities. + +This plugin runs yara.compile on every save, parses the errors, and returns list of diagnostic messages. + +Language Server: https://github.com/avast/yls +]], + }, +} diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/zk.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/zk.lua index c289045..e706528 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/zk.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/zk.lua @@ -14,7 +14,7 @@ return { arguments = { vim.api.nvim_buf_get_name(0) }, } end, - description = 'Index', + description = 'ZkIndex', }, ZkNew = { function(...) @@ -37,7 +37,7 @@ return { }, docs = { description = [[ -github.com/mickael-menu/zk +https://github.com/mickael-menu/zk A plain text note-taking assistant ]], diff --git a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/zls.lua b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/zls.lua index d890fb6..d92a797 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/server_configurations/zls.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/server_configurations/zls.lua @@ -4,7 +4,7 @@ return { default_config = { cmd = { 'zls' }, filetypes = { 'zig', 'zir' }, - root_dir = util.root_pattern('zls.json', '.git'), + root_dir = util.root_pattern('zls.json', 'build.zig', '.git'), single_file_support = true, }, docs = { @@ -14,7 +14,7 @@ https://github.com/zigtools/zls Zig LSP implementation + Zig Language Server ]], default_config = { - root_dir = [[util.root_pattern("zls.json", ".git")]], + root_dir = [[util.root_pattern("zls.json", "build.zig", ".git")]], }, }, } diff --git a/start/lspconfig-0.1.8/lua/lspconfig/ui/lspinfo.lua b/start/lspconfig-0.1.8/lua/lspconfig/ui/lspinfo.lua new file mode 100644 index 0000000..886014a --- /dev/null +++ b/start/lspconfig-0.1.8/lua/lspconfig/ui/lspinfo.lua @@ -0,0 +1,369 @@ +local api, fn = vim.api, vim.fn +local windows = require 'lspconfig.ui.windows' +local util = require 'lspconfig.util' + +local error_messages = { + cmd_not_found = 'Unable to find executable. Please check your path and ensure the server is installed', + no_filetype_defined = 'No filetypes defined, Please define filetypes in setup()', + root_dir_not_found = 'Not found.', + async_root_dir_function = 'Asynchronous root_dir functions are not supported in :LspInfo', +} + +local helptags = { + [error_messages.no_filetype_defined] = { 'lspconfig-setup' }, + [error_messages.root_dir_not_found] = { 'lspconfig-root-detection' }, +} + +local function trim_blankspace(cmd) + local trimmed_cmd = {} + for _, str in ipairs(cmd) do + trimmed_cmd[#trimmed_cmd + 1] = str:match '^%s*(.*)' + end + return trimmed_cmd +end + +local function indent_lines(lines, offset) + return vim.tbl_map(function(val) + return offset .. val + end, lines) +end + +local function remove_newlines(cmd) + cmd = trim_blankspace(cmd) + cmd = table.concat(cmd, ' ') + cmd = vim.split(cmd, '\n') + cmd = trim_blankspace(cmd) + cmd = table.concat(cmd, ' ') + return cmd +end + +local cmd_type = { + ['function'] = function(_) + return '<function>', 'NA' + end, + ['table'] = function(config) + local cmd = remove_newlines(config.cmd) + if vim.fn.executable(config.cmd[1]) == 1 then + return cmd, 'true' + end + return cmd, error_messages.cmd_not_found + end, +} + +local function make_config_info(config, bufnr) + local config_info = {} + config_info.name = config.name + config_info.helptags = {} + + if config.cmd then + config_info.cmd, config_info.cmd_is_executable = cmd_type[type(config.cmd)](config) + else + config_info.cmd = 'cmd not defined' + config_info.cmd_is_executable = 'NA' + end + + local buffer_dir = api.nvim_buf_call(bufnr, function() + return vim.fn.expand '%:p:h' + end) + + if config.get_root_dir then + local root_dir + local co = coroutine.create(function() + local status, err = pcall(function() + root_dir = config.get_root_dir(buffer_dir) + end) + if not status then + vim.notify(('[lspconfig] unhandled error: %s'):format(tostring(err), vim.log.levels.WARN)) + end + end) + coroutine.resume(co) + if root_dir then + config_info.root_dir = root_dir + elseif coroutine.status(co) == 'suspended' then + config_info.root_dir = error_messages.async_root_dir_function + else + config_info.root_dir = error_messages.root_dir_not_found + end + else + config_info.root_dir = error_messages.root_dir_not_found + vim.list_extend(config_info.helptags, helptags[error_messages.root_dir_not_found]) + end + + config_info.autostart = (config.autostart and 'true') or 'false' + config_info.handlers = table.concat(vim.tbl_keys(config.handlers), ', ') + config_info.filetypes = table.concat(config.filetypes or {}, ', ') + + local lines = { + 'Config: ' .. config_info.name, + } + + local info_lines = { + 'filetypes: ' .. config_info.filetypes, + 'root directory: ' .. config_info.root_dir, + 'cmd: ' .. config_info.cmd, + 'cmd is executable: ' .. config_info.cmd_is_executable, + 'autostart: ' .. config_info.autostart, + 'custom handlers: ' .. config_info.handlers, + } + + if vim.tbl_count(config_info.helptags) > 0 then + local help = vim.tbl_map(function(helptag) + return string.format(':h %s', helptag) + end, config_info.helptags) + info_lines = vim.list_extend({ + 'Refer to ' .. table.concat(help, ', ') .. ' for help.', + }, info_lines) + end + + vim.list_extend(lines, indent_lines(info_lines, '\t')) + + return lines +end + +---@param client vim.lsp.Client +---@param fname string +local function make_client_info(client, fname) + local client_info = {} + + client_info.cmd = cmd_type[type(client.config.cmd)](client.config) + local workspace_folders = fn.has 'nvim-0.9' == 1 and client.workspace_folders or client.workspaceFolders + local uv = vim.loop + local is_windows = uv.os_uname().version:match 'Windows' + fname = uv.fs_realpath(fname) or fn.fnamemodify(fn.resolve(fname), ':p') + if is_windows then + fname:gsub('%/', '%\\') + end + + if workspace_folders then + for _, schema in ipairs(workspace_folders) do + local matched = true + local root_dir = uv.fs_realpath(schema.name) + if root_dir == nil or fname:sub(1, root_dir:len()) ~= root_dir then + matched = false + end + + if matched then + client_info.root_dir = schema.name + break + end + end + end + + if not client_info.root_dir then + client_info.root_dir = 'Running in single file mode.' + end + client_info.filetypes = table.concat(client.config.filetypes or {}, ', ') + client_info.autostart = (client.config.autostart and 'true') or 'false' + client_info.attached_buffers_list = table.concat(vim.lsp.get_buffers_by_client_id(client.id), ', ') + + local lines = { + '', + 'Client: ' + .. client.name + .. ' (id: ' + .. tostring(client.id) + .. ', bufnr: [' + .. client_info.attached_buffers_list + .. '])', + } + + local info_lines = { + 'filetypes: ' .. client_info.filetypes, + 'autostart: ' .. client_info.autostart, + 'root directory: ' .. client_info.root_dir, + 'cmd: ' .. client_info.cmd, + } + + if client.config.lspinfo then + local server_specific_info = client.config.lspinfo(client.config) + info_lines = vim.list_extend(info_lines, server_specific_info) + end + + vim.list_extend(lines, indent_lines(info_lines, '\t')) + + return lines +end + +return function() + -- These options need to be cached before switching to the floating + -- buffer. + local original_bufnr = api.nvim_get_current_buf() + local buf_clients = util.get_lsp_clients { bufnr = original_bufnr } + local clients = util.get_lsp_clients() + local buffer_filetype = vim.bo.filetype + local fname = api.nvim_buf_get_name(original_bufnr) + + windows.default_options.wrap = true + windows.default_options.breakindent = true + windows.default_options.breakindentopt = 'shift:25' + windows.default_options.showbreak = 'NONE' + + local win_info = windows.percentage_range_window(0.8, 0.7) + local bufnr, win_id = win_info.bufnr, win_info.win_id + vim.bo.bufhidden = 'wipe' + + local buf_lines = {} + + local buf_client_ids = {} + for _, client in ipairs(buf_clients) do + buf_client_ids[#buf_client_ids + 1] = client.id + end + + local other_active_clients = {} + for _, client in ipairs(clients) do + if not vim.tbl_contains(buf_client_ids, client.id) then + other_active_clients[#other_active_clients + 1] = client + end + end + + -- insert the tips at the top of window + buf_lines[#buf_lines + 1] = 'Press q or <Esc> to close this window. Press <Tab> to view server doc.' + + local header = { + '', + 'Language client log: ' .. (vim.lsp.get_log_path()), + 'Detected filetype: ' .. buffer_filetype, + } + vim.list_extend(buf_lines, header) + + local buffer_clients_header = { + '', + tostring(#vim.tbl_keys(buf_clients)) .. ' client(s) attached to this buffer: ', + } + + vim.list_extend(buf_lines, buffer_clients_header) + for _, client in ipairs(buf_clients) do + local client_info = make_client_info(client, fname) + vim.list_extend(buf_lines, client_info) + end + + local other_active_section_header = { + '', + tostring(#other_active_clients) .. ' active client(s) not attached to this buffer: ', + } + if not vim.tbl_isempty(other_active_clients) then + vim.list_extend(buf_lines, other_active_section_header) + end + for _, client in ipairs(other_active_clients) do + local client_info = make_client_info(client, fname) + vim.list_extend(buf_lines, client_info) + end + + local other_matching_configs_header = { + '', + 'Other clients that match the filetype: ' .. buffer_filetype, + '', + } + + local other_matching_configs = util.get_other_matching_providers(buffer_filetype) + + if not vim.tbl_isempty(other_matching_configs) then + vim.list_extend(buf_lines, other_matching_configs_header) + for _, config in ipairs(other_matching_configs) do + vim.list_extend(buf_lines, make_config_info(config, original_bufnr)) + end + end + + local matching_config_header = { + '', + 'Configured servers list: ' .. table.concat(util.available_servers(), ', '), + } + + vim.list_extend(buf_lines, matching_config_header) + + local fmt_buf_lines = indent_lines(buf_lines, ' ') + + api.nvim_buf_set_lines(bufnr, 0, -1, true, fmt_buf_lines) + vim.bo.modifiable = false + vim.bo.filetype = 'lspinfo' + + local augroup = api.nvim_create_augroup('lspinfo', { clear = false }) + + local function close() + api.nvim_clear_autocmds { group = augroup, buffer = bufnr } + if api.nvim_win_is_valid(win_id) then + api.nvim_win_close(win_id, true) + end + end + + vim.keymap.set('n', '<ESC>', close, { buffer = bufnr, nowait = true }) + vim.keymap.set('n', 'q', close, { buffer = bufnr, nowait = true }) + api.nvim_create_autocmd({ 'BufDelete', 'BufHidden' }, { + once = true, + buffer = bufnr, + callback = close, + group = augroup, + }) + + vim.fn.matchadd( + 'Error', + error_messages.no_filetype_defined + .. '.\\|' + .. 'cmd not defined\\|' + .. error_messages.cmd_not_found + .. '\\|' + .. error_messages.root_dir_not_found + ) + + vim.cmd [[ + syn keyword String true + syn keyword Error false + syn match LspInfoFiletypeList /\<filetypes\?:\s*\zs.*\ze/ contains=LspInfoFiletype + syn match LspInfoFiletype /\k\+/ contained + syn match LspInfoTitle /^\s*\%(Client\|Config\):\s*\zs\S\+\ze/ + syn match LspInfoListList /^\s*Configured servers list:\s*\zs.*\ze/ contains=LspInfoList + syn match LspInfoList /\S\+/ contained + ]] + + api.nvim_buf_add_highlight(bufnr, 0, 'LspInfoTip', 0, 0, -1) + + local function show_doc() + local lines = {} + local function append_lines(config) + if not config then + return + end + local desc = vim.tbl_get(config, 'document_config', 'docs', 'description') + if desc then + lines[#lines + 1] = string.format('# %s', config.name) + lines[#lines + 1] = '' + vim.list_extend(lines, vim.split(desc, '\n')) + lines[#lines + 1] = '' + end + end + + lines[#lines + 1] = 'Press <Tab> to close server info.' + lines[#lines + 1] = '' + + for _, client in ipairs(buf_clients) do + local config = require('lspconfig.configs')[client.name] + append_lines(config) + end + + for _, config in ipairs(other_matching_configs) do + append_lines(config) + end + + local info = windows.percentage_range_window(0.8, 0.7) + lines = indent_lines(lines, ' ') + api.nvim_buf_set_lines(info.bufnr, 0, -1, false, lines) + api.nvim_buf_add_highlight(info.bufnr, 0, 'LspInfoTip', 0, 0, -1) + + vim.bo[info.bufnr].filetype = 'markdown' + vim.bo[info.bufnr].syntax = 'on' + vim.wo[info.win_id].concealcursor = 'niv' + vim.wo[info.win_id].conceallevel = 2 + vim.wo[info.win_id].breakindent = false + vim.wo[info.win_id].breakindentopt = '' + + local function close_doc_win() + if api.nvim_win_is_valid(info.win_id) then + api.nvim_win_close(info.win_id, true) + end + end + + vim.keymap.set('n', '<TAB>', close_doc_win, { buffer = info.bufnr }) + end + + vim.keymap.set('n', '<TAB>', show_doc, { buffer = true, nowait = true }) +end diff --git a/start/lspconfig-0.1.3/lua/lspconfig/ui/windows.lua b/start/lspconfig-0.1.8/lua/lspconfig/ui/windows.lua index 8a39204..dc02c9e 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/ui/windows.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/ui/windows.lua @@ -1,6 +1,8 @@ -- The following is extracted and modified from plenary.vnim by -- TJ Devries. It is not a stable API, and is expected to change -- +local api = vim.api + local function apply_defaults(original, defaults) if original == nil then original = {} @@ -19,18 +21,15 @@ end local win_float = {} -win_float.default_options = { - winblend = 15, - percentage = 0.9, -} +win_float.default_options = {} function win_float.default_opts(options) - options = apply_defaults(options, win_float.default_options) + options = apply_defaults(options, { percentage = 0.9 }) local width = math.floor(vim.o.columns * options.percentage) local height = math.floor(vim.o.lines * options.percentage) - local top = math.floor(((vim.o.lines - height) / 2) - 1) + local top = math.floor(((vim.o.lines - height) / 2)) local left = math.floor((vim.o.columns - width) / 2) local opts = { @@ -52,6 +51,8 @@ function win_float.default_opts(options) }, } + opts.border = options.border and options.border + return opts end @@ -75,7 +76,7 @@ function win_float.percentage_range_window(col_range, row_range, options) assert(row_range <= 1) assert(row_range > 0) height_percentage = row_range - row_start_percentage = (1 - height_percentage) / 2 + row_start_percentage = (1 - height_percentage) / 3 elseif type(row_range) == 'table' then height_percentage = row_range[2] - row_range[1] row_start_percentage = row_range[1] @@ -85,6 +86,7 @@ function win_float.percentage_range_window(col_range, row_range, options) win_opts.height = math.ceil(vim.o.lines * height_percentage) win_opts.row = math.ceil(vim.o.lines * row_start_percentage) + win_opts.border = options.border or 'none' local width_percentage, col_start_percentage if type(col_range) == 'number' then @@ -102,11 +104,21 @@ function win_float.percentage_range_window(col_range, row_range, options) win_opts.col = math.floor(vim.o.columns * col_start_percentage) win_opts.width = math.floor(vim.o.columns * width_percentage) - local bufnr = options.bufnr or vim.api.nvim_create_buf(false, true) - local win_id = vim.api.nvim_open_win(bufnr, true, win_opts) - vim.api.nvim_win_set_buf(win_id, bufnr) + local bufnr = options.bufnr or api.nvim_create_buf(false, true) + local win_id = api.nvim_open_win(bufnr, true, win_opts) + api.nvim_win_set_option(win_id, 'winhl', 'FloatBorder:LspInfoBorder') + + for k, v in pairs(win_float.default_options) do + if k ~= 'border' then + vim.opt_local[k] = v + end + end + + api.nvim_win_set_buf(win_id, bufnr) - vim.cmd 'setlocal nocursorcolumn ts=2 sw=2' + api.nvim_win_set_option(win_id, 'cursorcolumn', false) + api.nvim_buf_set_option(bufnr, 'tabstop', 2) + api.nvim_buf_set_option(bufnr, 'shiftwidth', 2) return { bufnr = bufnr, diff --git a/start/lspconfig-0.1.3/lua/lspconfig/util.lua b/start/lspconfig-0.1.8/lua/lspconfig/util.lua index 3febafc..a06bfa0 100644 --- a/start/lspconfig-0.1.3/lua/lspconfig/util.lua +++ b/start/lspconfig-0.1.8/lua/lspconfig/util.lua @@ -3,7 +3,9 @@ local validate = vim.validate local api = vim.api local lsp = vim.lsp local uv = vim.loop -local fn = vim.fn +local nvim_ten = vim.fn.has 'nvim-0.10' == 1 + +local is_windows = uv.os_uname().version:match 'Windows' local M = {} @@ -14,17 +16,17 @@ M.default_config = { init_options = vim.empty_dict(), handlers = {}, autostart = true, + capabilities = lsp.protocol.make_client_capabilities(), } -- global on_setup hook M.on_setup = nil function M.bufname_valid(bufname) - if bufname and bufname ~= '' and (bufname:match '^([a-zA-Z]:).*' or bufname:match '^/') then + if bufname:match '^/' or bufname:match '^[a-zA-Z]:' or bufname:match '^zipfile://' or bufname:match '^tarfile:' then return true - else - return false end + return false end function M.validate_bufnr(bufnr) @@ -58,45 +60,49 @@ function M.add_hook_after(func, new_fn) end end -function M.create_module_commands(module_name, commands) - for command_name, def in pairs(commands) do - local parts = { 'command!' } - -- Insert attributes. - for k, v in pairs(def) do - if type(k) == 'string' and type(v) == 'boolean' and v then - table.insert(parts, '-' .. k) - elseif type(k) == 'number' and type(v) == 'string' and v:match '^%-' then - table.insert(parts, v) +-- Maps lspconfig-style command options to nvim_create_user_command (i.e. |command-attributes|) option names. +local opts_aliases = { + ['description'] = 'desc', +} + +---@param command_definition table<string | integer, any> +function M._parse_user_command_options(command_definition) + ---@type table<string, string | boolean | number> + local opts = {} + for k, v in pairs(command_definition) do + if type(k) == 'string' then + local attribute = k.gsub(k, '^%-+', '') + opts[opts_aliases[attribute] or attribute] = v + elseif type(k) == 'number' and type(v) == 'string' and v:match '^%-' then + -- Splits strings like "-nargs=* -complete=customlist,v:lua.something" into { "-nargs=*", "-complete=customlist,v:lua.something" } + for _, command_attribute in ipairs(vim.split(v, '%s')) do + -- Splits attribute into a key-value pair, like "-nargs=*" to { "-nargs", "*" } + local attribute, value = unpack(vim.split(command_attribute, '=', { plain = true })) + attribute = attribute.gsub(attribute, '^%-+', '') + opts[opts_aliases[attribute] or attribute] = value or true end end - table.insert(parts, command_name) - -- The command definition. - table.insert( - parts, - string.format("lua require'lspconfig'[%q].commands[%q][1](<f-args>)", module_name, command_name) - ) - api.nvim_command(table.concat(parts, ' ')) end + return opts end -function M.has_bins(...) - for i = 1, select('#', ...) do - if 0 == fn.executable((select(i, ...))) then - return false - end +function M.create_module_commands(module_name, commands) + for command_name, def in pairs(commands) do + local opts = M._parse_user_command_options(def) + api.nvim_create_user_command(command_name, function(info) + require('lspconfig')[module_name].commands[command_name][1](unpack(info.fargs)) + end, opts) end - return true -end - -M.script_path = function() - local str = debug.getinfo(2, 'S').source:sub(2) - return str:match '(.*[/\\])' end -- Some path utilities M.path = (function() - local is_windows = uv.os_uname().version:match 'Windows' + local function escape_wildcards(path) + return path:gsub('([%[%]%?%*])', '\\%1') + end + --- @param path string + --- @return string local function sanitize(path) if is_windows then path = path:sub(1, 1):upper() .. path:sub(2) @@ -105,19 +111,27 @@ M.path = (function() return path end + --- @param filename string + --- @return string|false local function exists(filename) local stat = uv.fs_stat(filename) return stat and stat.type or false end + --- @param filename string + --- @return boolean local function is_dir(filename) return exists(filename) == 'directory' end + --- @param filename string + --- @return boolean local function is_file(filename) return exists(filename) == 'file' end + --- @param path string + --- @return boolean local function is_fs_root(path) if is_windows then return path:match '^%a:$' @@ -126,6 +140,8 @@ M.path = (function() end end + --- @param filename string + --- @return boolean local function is_absolute(filename) if is_windows then return filename:match '^%a:' or filename:match '^\\\\' @@ -134,11 +150,14 @@ M.path = (function() end end + --- @generic T: string? + --- @param path T + --- @return T local function dirname(path) local strip_dir_pat = '/([^/]+)$' local strip_sep_pat = '/$' if not path or #path == 0 then - return + return path end local result = path:gsub(strip_sep_pat, ''):gsub(strip_dir_pat, '') if #result == 0 then @@ -152,7 +171,7 @@ M.path = (function() end local function path_join(...) - return table.concat(vim.tbl_flatten { ... }, '/') + return table.concat(M.tbl_flatten { ... }, '/') end -- Traverse the path calling cb along the way. @@ -206,7 +225,10 @@ M.path = (function() return dir == root end + local path_separator = is_windows and ';' or ':' + return { + escape_wildcards = escape_wildcards, is_dir = is_dir, is_file = is_file, is_absolute = is_absolute, @@ -217,94 +239,10 @@ M.path = (function() traverse_parents = traverse_parents, iterate_parents = iterate_parents, is_descendant = is_descendant, + path_separator = path_separator, } end)() --- Returns a function(root_dir), which, when called with a root_dir it hasn't --- seen before, will call make_config(root_dir) and start a new client. -function M.server_per_root_dir_manager(make_config) - local clients = {} - local single_file_clients = {} - local manager = {} - - function manager.add(root_dir, single_file) - local client_id - -- This is technically unnecessary, as lspconfig's path utilities should be hermetic, - -- however users are free to return strings in custom root resolvers. - root_dir = M.path.sanitize(root_dir) - if single_file then - client_id = single_file_clients[root_dir] - elseif root_dir and M.path.is_dir(root_dir) then - client_id = clients[root_dir] - else - return - end - - -- Check if we have a client already or start and store it. - if not client_id then - local new_config = make_config(root_dir) - -- do nothing if the client is not enabled - if new_config.enabled == false then - return - end - if not new_config.cmd then - vim.notify( - string.format( - '[lspconfig] cmd not defined for %q. Manually set cmd in the setup {} call according to server_configurations.md, see :help lspconfig-index.', - new_config.name - ), - vim.log.levels.ERROR - ) - return - end - new_config.on_exit = M.add_hook_before(new_config.on_exit, function() - clients[root_dir] = nil - single_file_clients[root_dir] = nil - end) - - -- Launch the server in the root directory used internally by lspconfig, if otherwise unset - -- also check that the path exist - if not new_config.cmd_cwd and uv.fs_realpath(root_dir) then - new_config.cmd_cwd = root_dir - end - - -- Sending rootDirectory and workspaceFolders as null is not explicitly - -- codified in the spec. Certain servers crash if initialized with a NULL - -- root directory. - if single_file then - new_config.root_dir = nil - new_config.workspace_folders = nil - end - client_id = lsp.start_client(new_config) - - -- Handle failures in start_client - if not client_id then - return - end - - if single_file then - single_file_clients[root_dir] = client_id - else - clients[root_dir] = client_id - end - end - return client_id - end - - function manager.clients() - local res = {} - for _, id in pairs(clients) do - local client = lsp.get_client_by_id(id) - if client then - table.insert(res, client) - end - end - return res - end - - return manager -end - function M.search_ancestors(startpath, func) validate { func = { func, 'f' } } if func(startpath) then @@ -324,21 +262,34 @@ function M.search_ancestors(startpath, func) end end +function M.tbl_flatten(t) + return nvim_ten and vim.iter(t):flatten(math.huge):totable() or vim.tbl_flatten(t) +end + +function M.get_lsp_clients(filter) + return nvim_ten and lsp.get_clients(filter) or lsp.get_active_clients(filter) +end + function M.root_pattern(...) - local patterns = vim.tbl_flatten { ... } - local function matcher(path) + local patterns = M.tbl_flatten { ... } + return function(startpath) + startpath = M.strip_archive_subpath(startpath) for _, pattern in ipairs(patterns) do - for _, p in ipairs(vim.fn.glob(M.path.join(path, pattern), true, true)) do - if M.path.exists(p) then - return path + local match = M.search_ancestors(startpath, function(path) + for _, p in ipairs(vim.fn.glob(M.path.join(M.path.escape_wildcards(path), pattern), true, true)) do + if M.path.exists(p) then + return path + end end + end) + + if match ~= nil then + return match end end end - return function(startpath) - return M.search_ancestors(startpath, matcher) - end end + function M.find_git_ancestor(startpath) return M.search_ancestors(startpath, function(path) -- Support git directories and git files (worktrees) @@ -347,6 +298,16 @@ function M.find_git_ancestor(startpath) end end) end + +function M.find_mercurial_ancestor(startpath) + return M.search_ancestors(startpath, function(path) + -- Support Mercurial directories + if M.path.is_dir(M.path.join(path, '.hg')) then + return path + end + end) +end + function M.find_node_modules_ancestor(startpath) return M.search_ancestors(startpath, function(path) if M.path.is_dir(M.path.join(path, 'node_modules')) then @@ -354,6 +315,7 @@ function M.find_node_modules_ancestor(startpath) end end) end + function M.find_package_json_ancestor(startpath) return M.search_ancestors(startpath, function(path) if M.path.is_file(M.path.join(path, 'package.json')) then @@ -362,8 +324,25 @@ function M.find_package_json_ancestor(startpath) end) end +function M.insert_package_json(config_files, field, fname) + local path = vim.fn.fnamemodify(fname, ':h') + local root_with_package = M.find_package_json_ancestor(path) + + if root_with_package then + -- only add package.json if it contains field parameter + local path_sep = is_windows and '\\' or '/' + for line in io.lines(root_with_package .. path_sep .. 'package.json') do + if line:find(field) then + config_files[#config_files + 1] = 'package.json' + break + end + end + end + return config_files +end + function M.get_active_clients_list_by_ft(filetype) - local clients = vim.lsp.get_active_clients() + local clients = M.get_lsp_clients() local clients_list = {} for _, client in pairs(clients) do local filetypes = client.config.filetypes or {} @@ -393,19 +372,23 @@ function M.get_other_matching_providers(filetype) return other_matching_configs end -function M.get_clients_from_cmd_args(arg) - local result = {} - for id in (arg or ''):gmatch '(%d+)' do - result[id] = vim.lsp.get_client_by_id(tonumber(id)) - end - if vim.tbl_isempty(result) then - return M.get_managed_clients() +function M.get_config_by_ft(filetype) + local configs = require 'lspconfig.configs' + local matching_configs = {} + for _, config in pairs(configs) do + local filetypes = config.filetypes or {} + for _, ft in pairs(filetypes) do + if ft == filetype then + table.insert(matching_configs, config) + end + end end - return vim.tbl_values(result) + return matching_configs end function M.get_active_client_by_name(bufnr, servername) - for _, client in pairs(vim.lsp.buf_get_clients(bufnr)) do + --TODO(glepnir): remove this for loop when we want only support 0.10+ + for _, client in pairs(M.get_lsp_clients { bufnr = bufnr }) do if client.name == servername then return client end @@ -417,10 +400,30 @@ function M.get_managed_clients() local clients = {} for _, config in pairs(configs) do if config.manager then - vim.list_extend(clients, config.manager.clients()) + vim.list_extend(clients, config.manager:clients()) end end return clients end +function M.available_servers() + local servers = {} + local configs = require 'lspconfig.configs' + for server, config in pairs(configs) do + if config.manager ~= nil then + table.insert(servers, server) + end + end + return servers +end + +-- For zipfile: or tarfile: virtual paths, returns the path to the archive. +-- Other paths are returned unaltered. +function M.strip_archive_subpath(path) + -- Matches regex from zip.vim / tar.vim + path = vim.fn.substitute(path, 'zipfile://\\(.\\{-}\\)::[^\\\\].*$', '\\1', '') + path = vim.fn.substitute(path, 'tarfile:\\(.\\{-}\\)::.*$', '\\1', '') + return path +end + return M diff --git a/start/lspconfig-0.1.8/plugin/lspconfig.lua b/start/lspconfig-0.1.8/plugin/lspconfig.lua new file mode 100644 index 0000000..254ca6c --- /dev/null +++ b/start/lspconfig-0.1.8/plugin/lspconfig.lua @@ -0,0 +1,159 @@ +if vim.g.lspconfig ~= nil then + return +end +vim.g.lspconfig = 1 + +local api, lsp = vim.api, vim.lsp + +if vim.fn.has 'nvim-0.8' ~= 1 then + local version_info = vim.version() + local warning_str = string.format( + '[lspconfig] requires neovim 0.8 or later. Detected neovim version: 0.%s.%s', + version_info.minor, + version_info.patch + ) + vim.notify_once(warning_str) + return +end + +local completion_sort = function(items) + table.sort(items) + return items +end + +local lsp_complete_configured_servers = function(arg) + return completion_sort(vim.tbl_filter(function(s) + return s:sub(1, #arg) == arg + end, require('lspconfig.util').available_servers())) +end + +local lsp_get_active_client_ids = function(arg) + local clients = vim.tbl_map(function(client) + return ('%d (%s)'):format(client.id, client.name) + end, require('lspconfig.util').get_managed_clients()) + + return completion_sort(vim.tbl_filter(function(s) + return s:sub(1, #arg) == arg + end, clients)) +end + +local get_clients_from_cmd_args = function(arg) + local result = {} + for id in (arg or ''):gmatch '(%d+)' do + result[#result + 1] = lsp.get_client_by_id(tonumber(id)) + end + if #result == 0 then + return require('lspconfig.util').get_managed_clients() + end + return result +end + +for group, hi in pairs { + LspInfoBorder = { link = 'Label', default = true }, + LspInfoList = { link = 'Function', default = true }, + LspInfoTip = { link = 'Comment', default = true }, + LspInfoTitle = { link = 'Title', default = true }, + LspInfoFiletype = { link = 'Type', default = true }, +} do + api.nvim_set_hl(0, group, hi) +end + +-- Called from plugin/lspconfig.vim because it requires knowing that the last +-- script in scriptnames to be executed is lspconfig. +api.nvim_create_user_command('LspInfo', function() + require 'lspconfig.ui.lspinfo'() +end, { + desc = 'Displays attached, active, and configured language servers', +}) + +api.nvim_create_user_command('LspStart', function(info) + local server_name = string.len(info.args) > 0 and info.args or nil + if server_name then + local config = require('lspconfig.configs')[server_name] + if config then + config.launch() + return + end + end + + local matching_configs = require('lspconfig.util').get_config_by_ft(vim.bo.filetype) + for _, config in ipairs(matching_configs) do + config.launch() + end +end, { + desc = 'Manually launches a language server', + nargs = '?', + complete = lsp_complete_configured_servers, +}) + +api.nvim_create_user_command('LspRestart', function(info) + local detach_clients = {} + for _, client in ipairs(get_clients_from_cmd_args(info.args)) do + client.stop() + if vim.tbl_count(client.attached_buffers) > 0 then + detach_clients[client.name] = { client, lsp.get_buffers_by_client_id(client.id) } + end + end + local timer = vim.loop.new_timer() + timer:start( + 500, + 100, + vim.schedule_wrap(function() + for client_name, tuple in pairs(detach_clients) do + if require('lspconfig.configs')[client_name] then + local client, attached_buffers = unpack(tuple) + if client.is_stopped() then + for _, buf in pairs(attached_buffers) do + require('lspconfig.configs')[client_name].launch(buf) + end + detach_clients[client_name] = nil + end + end + end + + if next(detach_clients) == nil and not timer:is_closing() then + timer:close() + end + end) + ) +end, { + desc = 'Manually restart the given language client(s)', + nargs = '?', + complete = lsp_get_active_client_ids, +}) + +api.nvim_create_user_command('LspStop', function(info) + local current_buf = vim.api.nvim_get_current_buf() + local server_id, force + local arguments = vim.split(info.args, '%s') + for _, v in pairs(arguments) do + if v == '++force' then + force = true + elseif v:find '^[0-9]+$' then + server_id = v + end + end + + if not server_id then + local servers_on_buffer = require('lspconfig.util').get_lsp_clients { bufnr = current_buf } + for _, client in ipairs(servers_on_buffer) do + if client.attached_buffers[current_buf] then + client.stop(force) + end + end + else + for _, client in ipairs(get_clients_from_cmd_args(server_id)) do + client.stop(force) + end + end +end, { + desc = 'Manually stops the given language client(s)', + nargs = '?', + complete = lsp_get_active_client_ids, +}) + +api.nvim_create_user_command('LspLog', function() + vim.cmd(string.format('tabnew %s', lsp.get_log_path())) +end, { + desc = 'Opens the Nvim LSP client log.', +}) |