From 522d56557b00246286d803425751a4334f3a94a5 Mon Sep 17 00:00:00 2001 From: Michael Smith Date: Mon, 15 Jul 2024 20:05:47 +0100 Subject: Update lspconfig, add indent-blankline indent-blankline is probably old because I've actually been using it for ages, but I have a strict if-it-ain't-broke policy, so I'm not going to update it. lspconfig *was* broke though with nvim 0.10, so now it's fixed. --- start/lspconfig-0.1.3/doc/server_configurations.md | 6554 -------------------- 1 file changed, 6554 deletions(-) delete mode 100644 start/lspconfig-0.1.3/doc/server_configurations.md (limited to 'start/lspconfig-0.1.3/doc/server_configurations.md') diff --git a/start/lspconfig-0.1.3/doc/server_configurations.md b/start/lspconfig-0.1.3/doc/server_configurations.md deleted file mode 100644 index 426c422..0000000 --- a/start/lspconfig-0.1.3/doc/server_configurations.md +++ /dev/null @@ -1,6554 +0,0 @@ -# Configurations - - -The following LSP configs are included. This documentation is autogenerated from the lua files. Follow a link to find documentation for -that config. This file is accessible in neovim via `:help lspconfig-server-configurations` - -- [als](#als) -- [angularls](#angularls) -- [ansiblels](#ansiblels) -- [arduino_language_server](#arduino_language_server) -- [asm_lsp](#asm_lsp) -- [awk_ls](#awk_ls) -- [bashls](#bashls) -- [beancount](#beancount) -- [bicep](#bicep) -- [bsl_ls](#bsl_ls) -- [ccls](#ccls) -- [clangd](#clangd) -- [clarity_lsp](#clarity_lsp) -- [clojure_lsp](#clojure_lsp) -- [cmake](#cmake) -- [codeqlls](#codeqlls) -- [crystalline](#crystalline) -- [csharp_ls](#csharp_ls) -- [cssls](#cssls) -- [cssmodules_ls](#cssmodules_ls) -- [cucumber_language_server](#cucumber_language_server) -- [dartls](#dartls) -- [denols](#denols) -- [dhall_lsp_server](#dhall_lsp_server) -- [diagnosticls](#diagnosticls) -- [dockerls](#dockerls) -- [dotls](#dotls) -- [efm](#efm) -- [elixirls](#elixirls) -- [elmls](#elmls) -- [ember](#ember) -- [emmet_ls](#emmet_ls) -- [erlangls](#erlangls) -- [esbonio](#esbonio) -- [eslint](#eslint) -- [flow](#flow) -- [flux_lsp](#flux_lsp) -- [foam_ls](#foam_ls) -- [fortls](#fortls) -- [fsautocomplete](#fsautocomplete) -- [fstar](#fstar) -- [gdscript](#gdscript) -- [ghcide](#ghcide) -- [golangci_lint_ls](#golangci_lint_ls) -- [gopls](#gopls) -- [gradle_ls](#gradle_ls) -- [grammarly](#grammarly) -- [graphql](#graphql) -- [groovyls](#groovyls) -- [haxe_language_server](#haxe_language_server) -- [hdl_checker](#hdl_checker) -- [hhvm](#hhvm) -- [hie](#hie) -- [hls](#hls) -- [hoon_ls](#hoon_ls) -- [html](#html) -- [idris2_lsp](#idris2_lsp) -- [intelephense](#intelephense) -- [java_language_server](#java_language_server) -- [jdtls](#jdtls) -- [jedi_language_server](#jedi_language_server) -- [jsonls](#jsonls) -- [jsonnet_ls](#jsonnet_ls) -- [julials](#julials) -- [kotlin_language_server](#kotlin_language_server) -- [lean3ls](#lean3ls) -- [leanls](#leanls) -- [lelwel_ls](#lelwel_ls) -- [lemminx](#lemminx) -- [ltex](#ltex) -- [metals](#metals) -- [mint](#mint) -- [mm0_ls](#mm0_ls) -- [nickel_ls](#nickel_ls) -- [nimls](#nimls) -- [ocamlls](#ocamlls) -- [ocamllsp](#ocamllsp) -- [ols](#ols) -- [omnisharp](#omnisharp) -- [opencl_ls](#opencl_ls) -- [openscad_ls](#openscad_ls) -- [pasls](#pasls) -- [perlls](#perlls) -- [perlnavigator](#perlnavigator) -- [perlpls](#perlpls) -- [phpactor](#phpactor) -- [please](#please) -- [powershell_es](#powershell_es) -- [prismals](#prismals) -- [prosemd_lsp](#prosemd_lsp) -- [psalm](#psalm) -- [puppet](#puppet) -- [purescriptls](#purescriptls) -- [pylsp](#pylsp) -- [pyre](#pyre) -- [pyright](#pyright) -- [quick_lint_js](#quick_lint_js) -- [r_language_server](#r_language_server) -- [racket_langserver](#racket_langserver) -- [reason_ls](#reason_ls) -- [remark_ls](#remark_ls) -- [rescriptls](#rescriptls) -- [rls](#rls) -- [rnix](#rnix) -- [robotframework_ls](#robotframework_ls) -- [rome](#rome) -- [rust_analyzer](#rust_analyzer) -- [salt_ls](#salt_ls) -- [scry](#scry) -- [serve_d](#serve_d) -- [sixtyfps](#sixtyfps) -- [slint_lsp](#slint_lsp) -- [solang](#solang) -- [solargraph](#solargraph) -- [solc](#solc) -- [solidity_ls](#solidity_ls) -- [sorbet](#sorbet) -- [sourcekit](#sourcekit) -- [sourcery](#sourcery) -- [spectral](#spectral) -- [sqlls](#sqlls) -- [sqls](#sqls) -- [stylelint_lsp](#stylelint_lsp) -- [sumneko_lua](#sumneko_lua) -- [svelte](#svelte) -- [svls](#svls) -- [tailwindcss](#tailwindcss) -- [taplo](#taplo) -- [teal_ls](#teal_ls) -- [terraform_lsp](#terraform_lsp) -- [terraformls](#terraformls) -- [texlab](#texlab) -- [tflint](#tflint) -- [theme_check](#theme_check) -- [tsserver](#tsserver) -- [typeprof](#typeprof) -- [vala_ls](#vala_ls) -- [vdmj](#vdmj) -- [verible](#verible) -- [vimls](#vimls) -- [vls](#vls) -- [volar](#volar) -- [vuels](#vuels) -- [yamlls](#yamlls) -- [zeta_note](#zeta_note) -- [zk](#zk) -- [zls](#zls) - -## als - -https://github.com/AdaCore/ada_language_server - -Installation instructions can be found [here](https://github.com/AdaCore/ada_language_server#Install). - -Can be configured by passing a "settings" object to `als.setup{}`: - -```lua -require('lspconfig').als.setup{ - settings = { - ada = { - projectFile = "project.gpr"; - scenarioVariables = { ... }; - } - } -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.als.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ada_language_server" } - ``` - - `filetypes` : - ```lua - { "ada" } - ``` - - `root_dir` : - ```lua - util.root_pattern("Makefile", ".git", "*.gpr", "*.adc") - ``` - - -## angularls - -https://github.com/angular/vscode-ng-language-service - -`angular-language-server` can be installed via npm `npm install -g @angular/language-server`. - -Note, that if you override the default `cmd`, you must also update `on_new_config` to set `new_config.cmd` during startup. - -```lua -local project_library_path = "/path/to/project/lib" -local cmd = {"ngserver", "--stdio", "--tsProbeLocations", project_library_path , "--ngProbeLocations", project_library_path} - -require'lspconfig'.angularls.setup{ - cmd = cmd, - on_new_config = function(new_config,new_root_dir) - new_config.cmd = cmd - end, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.angularls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ngserver", "--stdio", "--tsProbeLocations", "", "--ngProbeLocations", "" } - ``` - - `filetypes` : - ```lua - { "typescript", "html", "typescriptreact", "typescript.tsx" } - ``` - - `root_dir` : - ```lua - root_pattern("angular.json", ".git") - ``` - - -## ansiblels - -https://github.com/ansible/ansible-language-server - -Language server for the ansible configuration management tool. - -`ansible-language-server` can be installed via `npm`: - -```sh -npm install -g @ansible/ansible-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ansiblels.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ansible-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "yaml.ansible" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - ansible = { - ansible = { - path = "ansible" - }, - ansibleLint = { - enabled = true, - path = "ansible-lint" - }, - executionEnvironment = { - enabled = false - }, - python = { - interpreterPath = "python" - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## arduino_language_server - -https://github.com/arduino/arduino-language-server - -Language server for Arduino - -The `arduino-language-server` can be installed by running: - go get -u github.com/arduino/arduino-language-server - -The `arduino-cli` tools must also be installed. Follow these instructions for your distro: - https://arduino.github.io/arduino-cli/latest/installation/ - -After installing the `arduino-cli` tools, follow these instructions for generating -a configuration file: - https://arduino.github.io/arduino-cli/latest/getting-started/#create-a-configuration-file -and make sure you install any relevant platforms libraries: - https://arduino.github.io/arduino-cli/latest/getting-started/#install-the-core-for-your-board - -The language server also requires `clangd` be installed. It will look for `clangd` by default but -the binary path can be overridden if need be. - -After all dependencies are installed you'll need to override the lspconfig command for the -language server in your setup function with the necessary configurations: - -```lua -lspconfig.arduino_language_server.setup({ - cmd = { - -- Required - "arduino-language-server", - "-cli-config", "/path/to/arduino-cli.yaml", - -- Optional - "-cli", "/path/to/arduino-cli", - "-clangd", "/path/to/clangd" - } -}) -``` - -For further instruction about configuration options, run `arduino-language-server --help`. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.arduino_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "arduino-language-server" } - ``` - - `filetypes` : - ```lua - { "arduino" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## asm_lsp - -https://github.com/bergercookie/asm-lsp - -Language Server for GAS/GO Assembly - -`asm-lsp` can be installed via cargo: -cargo install asm-lsp - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.asm_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "asm-lsp" } - ``` - - `filetypes` : - ```lua - { "asm", "vmasm" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## awk_ls - -https://github.com/Beaglefoot/awk-language-server/ - -`awk-language-server` can be installed via `npm`: -```sh -npm install -g awk-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.awk_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "awk-language-server" } - ``` - - `filetypes` : - ```lua - { "awk" } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## bashls - -https://github.com/mads-hartmann/bash-language-server - -`bash-language-server` can be installed via `npm`: -```sh -npm i -g bash-language-server -``` - -Language server for bash, written using tree sitter in typescript. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.bashls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "bash-language-server", "start" } - ``` - - `cmd_env` : - ```lua - { - GLOB_PATTERN = "*@(.sh|.inc|.bash|.command)" - } - ``` - - `filetypes` : - ```lua - { "sh" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## beancount - -https://github.com/polarmutex/beancount-language-server#installation - -See https://github.com/polarmutex/beancount-language-server#configuration for configuration options - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.beancount.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "beancount-langserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "beancount" } - ``` - - `init_options` : - ```lua - { - journalFile = "", - pythonPath = "python3" - } - ``` - - `root_dir` : - ```lua - root_pattern("elm.json") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## bicep - -https://github.com/azure/bicep -Bicep language server - -Bicep language server can be installed by downloading and extracting a release of bicep-langserver.zip from [Bicep GitHub releases](https://github.com/Azure/bicep/releases). - -Bicep language server requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -Neovim does not have built-in support for the bicep filetype which is required for lspconfig to automatically launch the language server. - -Filetype detection can be added via an autocmd: -```lua -vim.cmd [[ autocmd BufNewFile,BufRead *.bicep set filetype=bicep ]] -``` - -**By default, bicep language server does not have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. - -```lua -local bicep_lsp_bin = "/path/to/bicep-langserver/Bicep.LangServer.dll" -require'lspconfig'.bicep.setup{ - cmd = { "dotnet", bicep_lsp_bin }; - ... -} -``` - -To download the latest release and place in /usr/local/bin/bicep-langserver: -```bash -(cd $(mktemp -d) \ - && curl -fLO https://github.com/Azure/bicep/releases/latest/download/bicep-langserver.zip \ - && rm -rf /usr/local/bin/bicep-langserver \ - && unzip -d /usr/local/bin/bicep-langserver bicep-langserver.zip) -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.bicep.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "bicep" } - ``` - - `init_options` : - ```lua - {} - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## bsl_ls - - https://github.com/1c-syntax/bsl-language-server - - Language Server Protocol implementation for 1C (BSL) - 1C:Enterprise 8 and OneScript languages. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.bsl_ls.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "bsl", "os" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - -## ccls - -https://github.com/MaskRay/ccls/wiki - -ccls relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified -as compile_commands.json or, for simpler projects, a .ccls. -For details on how to automatically generate one using CMake look [here](https://cmake.org/cmake/help/latest/variable/CMAKE_EXPORT_COMPILE_COMMANDS.html). Alternatively, you can use [Bear](https://github.com/rizsotto/Bear). - -Customization options are passed to ccls at initialization time via init_options, a list of available options can be found [here](https://github.com/MaskRay/ccls/wiki/Customization#initialization-options). For example: - -```lua -local lspconfig = require'lspconfig' -lspconfig.ccls.setup { - init_options = { - compilationDatabaseDirectory = "build"; - index = { - threads = 0; - }; - clang = { - excludeArgs = { "-frounding-math"} ; - }; - } -} - -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ccls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ccls" } - ``` - - `filetypes` : - ```lua - { "c", "cpp", "objc", "objcpp" } - ``` - - `offset_encoding` : - ```lua - "utf-32" - ``` - - `root_dir` : - ```lua - root_pattern("compile_commands.json", ".ccls", ".git") - ``` - - `single_file_support` : - ```lua - false - ``` - - -## clangd - -https://clangd.llvm.org/installation.html - -**NOTE:** Clang >= 11 is recommended! See [this issue for more](https://github.com/neovim/nvim-lsp/issues/23). - -clangd relies on a [JSON compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html) specified as compile_commands.json, see https://clangd.llvm.org/installation#compile_commandsjson - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.clangd.setup{} -``` -**Commands:** -- ClangdSwitchSourceHeader: Switch between source/header - -**Default values:** - - `capabilities` : - ```lua - default capabilities, with offsetEncoding utf-8 - ``` - - `cmd` : - ```lua - { "clangd" } - ``` - - `filetypes` : - ```lua - { "c", "cpp", "objc", "objcpp" } - ``` - - `root_dir` : - ```lua - root_pattern( - '.clangd', - '.clang-tidy', - '.clang-format', - 'compile_commands.json', - 'compile_flags.txt', - 'configure.ac', - '.git' - ) - - ``` - - `single_file_support` : - ```lua - true - ``` - - -## clarity_lsp - -`clarity-lsp` is a language server for the Clarity language. Clarity is a decidable smart contract language that optimizes for predictability and security. Smart contracts allow developers to encode essential business logic on a blockchain. - -To learn how to configure the clarity language server, see the [clarity-lsp documentation](https://github.com/hirosystems/clarity-lsp). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.clarity_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "clarity-lsp" } - ``` - - `filetypes` : - ```lua - { "clar", "clarity" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - -## clojure_lsp - -https://github.com/snoe/clojure-lsp - -Clojure Language Server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.clojure_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "clojure-lsp" } - ``` - - `filetypes` : - ```lua - { "clojure", "edn" } - ``` - - `root_dir` : - ```lua - root_pattern("project.clj", "deps.edn", "build.boot", "shadow-cljs.edn", ".git") - ``` - - -## cmake - -https://github.com/regen100/cmake-language-server - -CMake LSP Implementation - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cmake.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "cmake-language-server" } - ``` - - `filetypes` : - ```lua - { "cmake" } - ``` - - `init_options` : - ```lua - { - buildDirectory = "build" - } - ``` - - `root_dir` : - ```lua - root_pattern(".git", "compile_commands.json", "build") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## codeqlls - -Reference: -https://help.semmle.com/codeql/codeql-cli.html - -Binaries: -https://github.com/github/codeql-cli-binaries - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.codeqlls.setup{} -``` - - -**Default values:** - - `before_init` : - ```lua - see source file - ``` - - `cmd` : - ```lua - { "codeql", "execute", "language-server", "--check-errors", "ON_CHANGE", "-q" } - ``` - - `filetypes` : - ```lua - { "ql" } - ``` - - `log_level` : - ```lua - 2 - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - search_path = "list containing all search paths, eg: '~/codeql-home/codeql-repo'" - } - ``` - - -## crystalline - -https://github.com/elbywan/crystalline - -Crystal language server. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.crystalline.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "crystalline" } - ``` - - `filetypes` : - ```lua - { "crystal" } - ``` - - `root_dir` : - ```lua - root_pattern('shard.yml', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## csharp_ls - -https://github.com/razzmatazz/csharp-language-server - -Language Server for C#. - -csharp-ls requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -The preferred way to install csharp-ls is with `dotnet tool install --global csharp-ls`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.csharp_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "csharp-ls" } - ``` - - `filetypes` : - ```lua - { "cs" } - ``` - - `init_options` : - ```lua - { - AutomaticWorkspaceInit = true - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## cssls - - -https://github.com/hrsh7th/vscode-langservers-extracted - -`css-languageserver` can be installed via `npm`: - -```sh -npm i -g vscode-langservers-extracted -``` - -Neovim does not currently include built-in snippets. `vscode-css-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. - -```lua ---Enable (broadcasting) snippet capability for completion -local capabilities = vim.lsp.protocol.make_client_capabilities() -capabilities.textDocument.completion.completionItem.snippetSupport = true - -require'lspconfig'.cssls.setup { - capabilities = capabilities, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cssls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vscode-css-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "css", "scss", "less" } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", ".git") or bufdir - ``` - - `settings` : - ```lua - { - css = { - validate = true - }, - less = { - validate = true - }, - scss = { - validate = true - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## cssmodules_ls - -https://github.com/antonk52/cssmodules-language-server - -Language server for autocompletion and go-to-definition functionality for CSS modules. - -You can install cssmodules-language-server via npm: -```sh -npm install -g cssmodules-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cssmodules_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "cssmodules-language-server" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "typescript", "typescriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern("package.json") - ``` - - -## cucumber_language_server - -https://cucumber.io -https://github.com/cucumber/common -https://www.npmjs.com/package/@cucumber/language-server - -Language server for Cucumber. - -`cucumber-language-server` can be installed via `npm`: -```sh -npm install -g @cucumber/language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.cucumber_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "cucumber-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "cucumber" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## dartls - -https://github.com/dart-lang/sdk/tree/master/pkg/analysis_server/tool/lsp_spec - -Language server for dart. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dartls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "dart", "./snapshots/analysis_server.dart.snapshot", "--lsp" } - ``` - - `filetypes` : - ```lua - { "dart" } - ``` - - `init_options` : - ```lua - { - closingLabels = true, - flutterOutline = true, - onlyAnalyzeProjectsWithOpenFiles = true, - outline = true, - suggestFromUnimportedLibraries = true - } - ``` - - `root_dir` : - ```lua - root_pattern("pubspec.yaml") - ``` - - `settings` : - ```lua - { - dart = { - completeFunctionCalls = true, - showTodos = true - } - } - ``` - - -## denols - -https://github.com/denoland/deno - -Deno's built-in language server - -To approrpiately highlight codefences returned from denols, you will need to augment vim.g.markdown_fenced languages - in your init.lua. Example: - -```lua -vim.g.markdown_fenced_languages = { - "ts=typescript" -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.denols.setup{} -``` -**Commands:** -- DenolsCache: Cache a module and all of its dependencies. - -**Default values:** - - `cmd` : - ```lua - { "deno", "lsp" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } - ``` - - `handlers` : - ```lua - { - ["textDocument/definition"] = , - ["textDocument/references"] = - } - ``` - - `init_options` : - ```lua - { - enable = true, - lint = false, - unstable = false - } - ``` - - `root_dir` : - ```lua - root_pattern("deno.json", "deno.jsonc", "tsconfig.json", ".git") - ``` - - -## dhall_lsp_server - -https://github.com/dhall-lang/dhall-haskell/tree/master/dhall-lsp-server - -language server for dhall - -`dhall-lsp-server` can be installed via cabal: -```sh -cabal install dhall-lsp-server -``` -prebuilt binaries can be found [here](https://github.com/dhall-lang/dhall-haskell/releases). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dhall_lsp_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "dhall-lsp-server" } - ``` - - `filetypes` : - ```lua - { "dhall" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## diagnosticls - -https://github.com/iamcco/diagnostic-languageserver - -Diagnostic language server integrate with linters. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.diagnosticls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "diagnostic-languageserver", "--stdio" } - ``` - - `filetypes` : - ```lua - Empty by default, override to add filetypes - ``` - - `root_dir` : - ```lua - Vim's starting directory - ``` - - `single_file_support` : - ```lua - true - ``` - - -## dockerls - -https://github.com/rcjsuen/dockerfile-language-server-nodejs - -`docker-langserver` can be installed via `npm`: -```sh -npm install -g dockerfile-language-server-nodejs -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dockerls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "docker-langserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "dockerfile" } - ``` - - `root_dir` : - ```lua - root_pattern("Dockerfile") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## dotls - -https://github.com/nikeee/dot-language-server - -`dot-language-server` can be installed via `npm`: -```sh -npm install -g dot-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.dotls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "dot-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "dot" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## efm - -https://github.com/mattn/efm-langserver - -General purpose Language Server that can use specified error message format generated from specified command. - -Requires at minimum EFM version [v0.0.38](https://github.com/mattn/efm-langserver/releases/tag/v0.0.38) to support -launching the language server on single files. If on an older version of EFM, disable single file support: - -```lua -require('lspconfig')['efm'].setup{ - settings = ..., -- You must populate this according to the EFM readme - filetypes = ..., -- Populate this according to the note below - single_file_support = false, -- This is the important line for supporting older version of EFM -} -``` - -Note: In order for neovim's built-in language server client to send the appropriate `languageId` to EFM, **you must -specify `filetypes` in your call to `setup{}`**. Otherwise `lspconfig` will launch EFM on the `BufEnter` instead -of the `FileType` autocommand, and the `filetype` variable used to populate the `languageId` will not yet be set. - -```lua -require('lspconfig')['efm'].setup{ - settings = ..., -- You must populate this according to the EFM readme - filetypes = { 'python','cpp','lua' } -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.efm.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "efm-langserver" } - ``` - - `root_dir` : - ```lua - util.root_pattern(".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## elixirls - -https://github.com/elixir-lsp/elixir-ls - -`elixir-ls` can be installed by following the instructions [here](https://github.com/elixir-lsp/elixir-ls#building-and-running). - -```bash -curl -fLO https://github.com/elixir-lsp/elixir-ls/releases/latest/download/elixir-ls.zip -unzip elixir-ls.zip -d /path/to/elixir-ls -# Unix -chmod +x /path/to/elixir-ls/language_server.sh -``` - -**By default, elixir-ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped elixir-ls. - -```lua -require'lspconfig'.elixirls.setup{ - -- Unix - cmd = { "/path/to/elixir-ls/language_server.sh" }; - -- Windows - cmd = { "/path/to/elixir-ls/language_server.bat" }; - ... -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.elixirls.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "elixir", "eelixir" } - ``` - - `root_dir` : - ```lua - root_pattern("mix.exs", ".git") or vim.loop.os_homedir() - ``` - - -## elmls - -https://github.com/elm-tooling/elm-language-server#installation - -If you don't want to use Nvim to install it, then you can use: -```sh -npm install -g elm elm-test elm-format @elm-tooling/elm-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.elmls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "elm-language-server" } - ``` - - `filetypes` : - ```lua - { "elm" } - ``` - - `init_options` : - ```lua - { - elmAnalyseTrigger = "change" - } - ``` - - `root_dir` : - ```lua - root_pattern("elm.json") - ``` - - -## ember - -https://github.com/lifeart/ember-language-server - -`ember-language-server` can be installed via `npm`: - -```sh -npm install -g @lifeart/ember-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ember.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ember-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "handlebars", "typescript", "javascript" } - ``` - - `root_dir` : - ```lua - root_pattern("ember-cli-build.js", ".git") - ``` - - -## emmet_ls - -https://github.com/aca/emmet-ls - -Package can be installed via `npm`: -```sh -npm install -g emmet-ls -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.emmet_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "emmet-ls", "--stdio" } - ``` - - `filetypes` : - ```lua - { "html", "css" } - ``` - - `root_dir` : - ```lua - git root - ``` - - `single_file_support` : - ```lua - true - ``` - - -## erlangls - -https://erlang-ls.github.io - -Language Server for Erlang. - -Clone [erlang_ls](https://github.com/erlang-ls/erlang_ls) -Compile the project with `make` and copy resulting binaries somewhere in your $PATH eg. `cp _build/*/bin/* ~/local/bin` - -Installation instruction can be found [here](https://github.com/erlang-ls/erlang_ls). - -Installation requirements: - - [Erlang OTP 21+](https://github.com/erlang/otp) - - [rebar3 3.9.1+](https://github.com/erlang/rebar3) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.erlangls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "erlang_ls" } - ``` - - `filetypes` : - ```lua - { "erlang" } - ``` - - `root_dir` : - ```lua - root_pattern('rebar.config', 'erlang.mk', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## esbonio - -https://github.com/swyddfa/esbonio - -Esbonio is a language server for [Sphinx](https://www.sphinx-doc.org/en/master/) documentation projects. -The language server can be installed via pip - -``` -pip install esbonio -``` - -Since Sphinx is highly extensible you will get best results if you install the language server in the same -Python environment as the one used to build your documentation. To ensure that the correct Python environment -is picked up, you can either launch `nvim` with the correct environment activated. - -``` -source env/bin/activate -nvim -``` - -Or you can modify the default `cmd` to include the full path to the Python interpreter. - -```lua -require'lspconfig'.esbonio.setup { - cmd = { '/path/to/virtualenv/bin/python', '-m', 'esbonio' } -} -``` - -Esbonio supports a number of config values passed as `init_options` on startup, for example. - -```lua -require'lspconfig'.esbonio.setup { - init_options = { - server = { - logLevel = "debug" - }, - sphinx = { - confDir = "/path/to/docs", - srcDir = "${confDir}/../docs-src" - } -} -``` - -A full list and explanation of the available options can be found [here](https://swyddfa.github.io/esbonio/docs/lsp/editors/index.html) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.esbonio.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "python3", "-m", "esbonio" } - ``` - - `filetypes` : - ```lua - { "rst" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## eslint - -https://github.com/hrsh7th/vscode-langservers-extracted - -vscode-eslint-language-server: A linting engine for JavaScript / Typescript - -`vscode-eslint-language-server` can be installed via `npm`: -```sh -npm i -g vscode-langservers-extracted -``` - -vscode-eslint-language-server provides an EslintFixAll command that can be used to format document on save -```vim -autocmd BufWritePre *.tsx,*.ts,*.jsx,*.js EslintFixAll -``` - -See [vscode-eslint](https://github.com/microsoft/vscode-eslint/blob/55871979d7af184bf09af491b6ea35ebd56822cf/server/src/eslintServer.ts#L216-L229) for configuration options. - -Additional messages you can handle: eslint/noConfig -Messages already handled in lspconfig: eslint/openDoc, eslint/confirmESLintExecution, eslint/probeFailed, eslint/noLibrary - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.eslint.setup{} -``` -**Commands:** -- EslintFixAll: Fix all eslint problems for this buffer - -**Default values:** - - `cmd` : - ```lua - { "vscode-eslint-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx", "vue" } - ``` - - `handlers` : - ```lua - { - ["eslint/confirmESLintExecution"] = , - ["eslint/noLibrary"] = , - ["eslint/openDoc"] = , - ["eslint/probeFailed"] = - } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - codeAction = { - disableRuleComment = { - enable = true, - location = "separateLine" - }, - showDocumentation = { - enable = true - } - }, - codeActionOnSave = { - enable = false, - mode = "all" - }, - format = true, - nodePath = "", - onIgnoredFiles = "off", - packageManager = "npm", - quiet = false, - rulesCustomizations = {}, - run = "onType", - useESLintClass = false, - validate = "on", - workingDirectory = { - mode = "location" - } - } - ``` - - -## flow - -https://flow.org/ -https://github.com/facebook/flow - -See below for how to setup Flow itself. -https://flow.org/en/docs/install/ - -See below for lsp command options. - -```sh -npx flow lsp --help -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.flow.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "npx", "--no-install", "flow", "lsp" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx" } - ``` - - `root_dir` : - ```lua - root_pattern(".flowconfig") - ``` - - -## flux_lsp - -https://github.com/influxdata/flux-lsp -`flux-lsp` can be installed via `cargo`: -```sh -cargo install --git https://github.com/influxdata/flux-lsp -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.flux_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "flux-lsp" } - ``` - - `filetypes` : - ```lua - { "flux" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## foam_ls - -https://github.com/FoamScience/foam-language-server - -`foam-language-server` can be installed via `npm` -```sh -npm install -g foam-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.foam_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "foam-ls", "--stdio" } - ``` - - `filetypes` : - ```lua - { "foam", "OpenFOAM" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## fortls - -https://github.com/hansec/fortran-language-server - -Fortran Language Server for the Language Server Protocol - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.fortls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "fortls" } - ``` - - `filetypes` : - ```lua - { "fortran" } - ``` - - `root_dir` : - ```lua - root_pattern(".fortls") - ``` - - `settings` : - ```lua - { - nthreads = 1 - } - ``` - - -## fsautocomplete - -https://github.com/fsharp/FsAutoComplete - -Language Server for F# provided by FsAutoComplete (FSAC). - -FsAutoComplete requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -The preferred way to install FsAutoComplete is with `dotnet tool install --global fsautocomplete`. - -Instructions to compile from source are found on the main [repository](https://github.com/fsharp/FsAutoComplete). - -You may also need to configure the filetype as Vim defaults to Forth for `*.fs` files: - -`autocmd BufNewFile,BufRead *.fs,*.fsx,*.fsi set filetype=fsharp` - -This is automatically done by plugins such as [PhilT/vim-fsharp](https://github.com/PhilT/vim-fsharp), [fsharp/vim-fsharp](https://github.com/fsharp/vim-fsharp), and [adelarsq/neofsharp.vim](https://github.com/adelarsq/neofsharp.vim). - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.fsautocomplete.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "fsautocomplete", "--background-service-enabled" } - ``` - - `filetypes` : - ```lua - { "fsharp" } - ``` - - `init_options` : - ```lua - { - AutomaticWorkspaceInit = true - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## fstar - -https://github.com/FStarLang/FStar - -LSP support is included in FStar. Make sure `fstar.exe` is in your PATH. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.fstar.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "fstar.exe", "--lsp" } - ``` - - `filetypes` : - ```lua - { "fstar" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## gdscript - -https://github.com/godotengine/godot - -Language server for GDScript, used by Godot Engine. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.gdscript.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "nc", "localhost", "6008" } - ``` - - `filetypes` : - ```lua - { "gd", "gdscript", "gdscript3" } - ``` - - `root_dir` : - ```lua - util.root_pattern("project.godot", ".git") - ``` - - -## ghcide - -https://github.com/digital-asset/ghcide - -A library for building Haskell IDE tooling. -"ghcide" isn't for end users now. Use "haskell-language-server" instead of "ghcide". - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ghcide.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ghcide", "--lsp" } - ``` - - `filetypes` : - ```lua - { "haskell", "lhaskell" } - ``` - - `root_dir` : - ```lua - root_pattern("stack.yaml", "hie-bios", "BUILD.bazel", "cabal.config", "package.yaml") - ``` - - -## golangci_lint_ls - -Combination of both lint server and client - -https://github.com/nametake/golangci-lint-langserver -https://github.com/golangci/golangci-lint - - -Installation of binaries needed is done via - -``` -go install github.com/nametake/golangci-lint-langserver@latest -go install github.com/golangci/golangci-lint/cmd/golangci-lint@v1.42.1 -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.golangci_lint_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "golangci-lint-langserver" } - ``` - - `filetypes` : - ```lua - { "go", "gomod" } - ``` - - `init_options` : - ```lua - { - command = { "golangci-lint", "run", "--out-format", "json" } - } - ``` - - `root_dir` : - ```lua - root_pattern('go.work') or root_pattern('go.mod', '.golangci.yaml', '.git') - ``` - - -## gopls - -https://github.com/golang/tools/tree/master/gopls - -Google's lsp server for golang. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.gopls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "gopls" } - ``` - - `filetypes` : - ```lua - { "go", "gomod", "gotmpl" } - ``` - - `root_dir` : - ```lua - root_pattern("go.mod", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## gradle_ls - -https://github.com/microsoft/vscode-gradle - -Microsoft's lsp server for gradle files - -If you're setting this up manually, build vscode-gradle using `./gradlew installDist` and point `cmd` to the `gradle-language-server` generated in the build directory - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.gradle_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "gradle-language-server" } - ``` - - `filetypes` : - ```lua - { "groovy" } - ``` - - `root_dir` : - ```lua - root_pattern("settings.gradle") - ``` - - -## grammarly - -https://github.com/emacs-grammarly/unofficial-grammarly-language-server - -`unofficial-grammarly-language-server` can be installed via `npm`: - -```sh -npm i -g @emacs-grammarly/unofficial-grammarly-language-server -``` - -WARNING: Since this language server uses Grammarly's API, any document you open with it running is shared with them. Please evaluate their [privacy policy](https://www.grammarly.com/privacy-policy) before using this. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.grammarly.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "unofficial-grammarly-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `handlers` : - ```lua - { - ["$/updateDocumentState"] = - } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## graphql - -https://github.com/graphql/graphiql/tree/main/packages/graphql-language-service-cli - -`graphql-lsp` can be installed via `npm`: - -```sh -npm install -g graphql-language-service-cli -``` - -Note that you must also have [the graphql package](https://github.com/graphql/graphql-js) installed and create a [GraphQL config file](https://www.graphql-config.com/docs/user/user-introduction). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.graphql.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "graphql-lsp", "server", "-m", "stream" } - ``` - - `filetypes` : - ```lua - { "graphql", "typescriptreact", "javascriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern('.git', '.graphqlrc*', '.graphql.config.*') - ``` - - -## groovyls - -https://github.com/prominic/groovy-language-server.git - -Requirements: - - Linux/macOS (for now) - - Java 11+ - -`groovyls` can be installed by following the instructions [here](https://github.com/prominic/groovy-language-server.git#build). - -If you have installed groovy language server, you can set the `cmd` custom path as follow: - -```lua -require'lspconfig'.groovyls.setup{ - -- Unix - cmd = { "java", "-jar", "path/to/groovyls/groovy-language-server-all.jar" }, - ... -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.groovyls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "java", "-jar", "groovy-language-server-all.jar" } - ``` - - `filetypes` : - ```lua - { "groovy" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## haxe_language_server - -https://github.com/vshaxe/haxe-language-server - -The Haxe language server can be built by running the following commands from -the project's root directory: - - npm install - npx lix run vshaxe-build -t language-server - -This will create `bin/server.js`. Note that the server requires Haxe 3.4.0 or -higher. - -After building the language server, set the `cmd` setting in your setup -function: - -```lua -lspconfig.haxe_language_server.setup({ - cmd = {"node", "path/to/bin/server.js"}, -}) -``` - -By default, an HXML compiler arguments file named `build.hxml` is expected in -your project's root directory. If your file is named something different, -specify it using the `init_options.displayArguments` setting. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.haxe_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "haxe-language-server" } - ``` - - `filetypes` : - ```lua - { "haxe" } - ``` - - `init_options` : - ```lua - { - displayArguments = { "build.hxml" } - } - ``` - - `root_dir` : - ```lua - root_pattern("*.hxml") - ``` - - `settings` : - ```lua - { - haxe = { - executable = "haxe" - } - } - ``` - - -## hdl_checker - -https://github.com/suoto/hdl_checker -Language server for hdl-checker. -Install using: `pip install hdl-checker --upgrade` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hdl_checker.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hdl_checker", "--lsp" } - ``` - - `filetypes` : - ```lua - { "vhdl", "verilog", "systemverilog" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## hhvm - -Language server for programs written in Hack -https://hhvm.com/ -https://github.com/facebook/hhvm -See below for how to setup HHVM & typechecker: -https://docs.hhvm.com/hhvm/getting-started/getting-started - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hhvm.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hh_client", "lsp" } - ``` - - `filetypes` : - ```lua - { "php", "hack" } - ``` - - `root_dir` : - ```lua - root_pattern(".hhconfig") - ``` - - -## hie - -https://github.com/haskell/haskell-ide-engine - -the following init_options are supported (see https://github.com/haskell/haskell-ide-engine#configuration): -```lua -init_options = { - languageServerHaskell = { - hlintOn = bool; - maxNumberOfProblems = number; - diagnosticsDebounceDuration = number; - liquidOn = bool (default false); - completionSnippetsOn = bool (default true); - formatOnImportOn = bool (default true); - formattingProvider = string (default "brittany", alternate "floskell"); - } -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hie.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hie-wrapper", "--lsp" } - ``` - - `filetypes` : - ```lua - { "haskell" } - ``` - - `root_dir` : - ```lua - root_pattern("stack.yaml", "package.yaml", ".git") - ``` - - -## hls - -https://github.com/haskell/haskell-language-server - -Haskell Language Server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "haskell-language-server-wrapper", "--lsp" } - ``` - - `filetypes` : - ```lua - { "haskell", "lhaskell" } - ``` - - `lspinfo` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern("*.cabal", "stack.yaml", "cabal.project", "package.yaml", "hie.yaml") - ``` - - `settings` : - ```lua - { - haskell = { - formattingProvider = "ormolu" - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## hoon_ls - -https://github.com/urbit/hoon-language-server - -A language server for Hoon. - -The language server can be installed via `npm install -g @hoon-language-server` - -Start a fake ~zod with `urbit -F zod`. -Start the language server at the Urbit Dojo prompt with: `|start %language-server` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.hoon_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "hoon-language-server" } - ``` - - `filetypes` : - ```lua - { "hoon" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## html - -https://github.com/hrsh7th/vscode-langservers-extracted - -`vscode-html-language-server` can be installed via `npm`: -```sh -npm i -g vscode-langservers-extracted -``` - -Neovim does not currently include built-in snippets. `vscode-html-language-server` only provides completions when snippet support is enabled. -To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. - -The code-formatting feature of the lsp can be controlled with the `provideFormatter` option. - -```lua ---Enable (broadcasting) snippet capability for completion -local capabilities = vim.lsp.protocol.make_client_capabilities() -capabilities.textDocument.completion.completionItem.snippetSupport = true - -require'lspconfig'.html.setup { - capabilities = capabilities, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.html.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vscode-html-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "html" } - ``` - - `init_options` : - ```lua - { - configurationSection = { "html", "css", "javascript" }, - embeddedLanguages = { - css = true, - javascript = true - }, - provideFormatter = true - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - `single_file_support` : - ```lua - true - ``` - - -## idris2_lsp - -https://github.com/idris-community/idris2-lsp - -The Idris 2 language server. - -Plugins for the Idris 2 filetype include -[Idris2-Vim](https://github.com/edwinb/idris2-vim) (fewer features, stable) and -[Nvim-Idris2](https://github.com/ShinKage/nvim-idris2) (cutting-edge, -experimental). - -Idris2-Lsp requires a build of Idris 2 that includes the "Idris 2 API" package. -Package managers with known support for this build include the -[AUR](https://aur.archlinux.org/packages/idris2-api-git/) and -[Homebrew](https://formulae.brew.sh/formula/idris2#default). - -If your package manager does not support the Idris 2 API, you will need to build -Idris 2 from source. Refer to the -[the Idris 2 installation instructions](https://github.com/idris-lang/Idris2/blob/main/INSTALL.md) -for details. Steps 5 and 8 are listed as "optional" in that guide, but they are -necessary in order to make the Idris 2 API available. - -You need to install a version of Idris2-Lsp that is compatible with your -version of Idris 2. There should be a branch corresponding to every released -Idris 2 version after v0.4.0. Use the latest commit on that branch. For example, -if you have Idris v0.5.1, you should use the v0.5.1 branch of Idris2-Lsp. - -If your Idris 2 version is newer than the newest Idris2-Lsp branch, use the -latest commit on the `master` branch, and set a reminder to check the Idris2-Lsp -repo for the release of a compatible versioned branch. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.idris2_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "idris2-lsp" } - ``` - - `filetypes` : - ```lua - { "idris2" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## intelephense - -https://intelephense.com/ - -`intelephense` can be installed via `npm`: -```sh -npm install -g intelephense -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.intelephense.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "intelephense", "--stdio" } - ``` - - `filetypes` : - ```lua - { "php" } - ``` - - `root_dir` : - ```lua - root_pattern("composer.json", ".git") - ``` - - -## java_language_server - -https://github.com/georgewfraser/java-language-server - -Java language server - -Point `cmd` to `lang_server_linux.sh` or the equivalent script for macOS/Windows provided by java-language-server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.java_language_server.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "java" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## jdtls - -https://projects.eclipse.org/projects/eclipse.jdt.ls - -Language server for Java. - -IMPORTANT: If you want all the features jdtls has to offer, [nvim-jdtls](https://github.com/mfussenegger/nvim-jdtls) -is highly recommended. If all you need is diagnostics, completion, imports, gotos and formatting and some code actions -you can keep reading here. - -For manual installation you can download precompiled binaries from the -[official downloads site](http://download.eclipse.org/jdtls/snapshots/?d) - -Due to the nature of java, settings cannot be inferred. Please set the following -environmental variables to match your installation. If you need per-project configuration -[direnv](https://github.com/direnv/direnv) is highly recommended. - -```bash -# Mandatory: -# .bashrc -export JDTLS_HOME=/path/to/jdtls_root # Directory with the plugin and configs directories - -# Optional: -export JAVA_HOME=/path/to/java_home # In case you don't have java in path or want to use a version in particular -export WORKSPACE=/path/to/workspace # Defaults to $HOME/workspace -``` -```lua - -- init.lua - require'lspconfig'.jdtls.setup{} -``` - -For automatic installation you can use the following unofficial installers/launchers under your own risk: - - [jdtls-launcher](https://github.com/eruizc-dev/jdtls-launcher) (Includes lombok support by default) - ```lua - -- init.lua - require'lspconfig'.jdtls.setup{ cmd = { 'jdtls' } } - ``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jdtls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "/usr/lib/jvm/temurin-11-jdk-amd64/bin/java", "-Declipse.application=org.eclipse.jdt.ls.core.id1", "-Dosgi.bundles.defaultStartLevel=4", "-Declipse.product=org.eclipse.jdt.ls.core.product", "-Dlog.protocol=true", "-Dlog.level=ALL", "-Xms1g", "-Xmx2G", "--add-modules=ALL-SYSTEM", "--add-opens", "java.base/java.util=ALL-UNNAMED", "--add-opens", "java.base/java.lang=ALL-UNNAMED", "-jar", "/plugins/org.eclipse.equinox.launcher_*.jar", "-configuration", "config_linux", "-data", "/home/runner/workspace" } - ``` - - `filetypes` : - ```lua - { "java" } - ``` - - `handlers` : - ```lua - { - ["language/status"] = , - ["textDocument/codeAction"] = , - ["textDocument/rename"] = , - ["workspace/applyEdit"] = - } - ``` - - `init_options` : - ```lua - { - jvm_args = {}, - workspace = "/home/runner/workspace" - } - ``` - - `root_dir` : - ```lua - { - -- Single-module projects - { - 'build.xml', -- Ant - 'pom.xml', -- Maven - 'settings.gradle', -- Gradle - 'settings.gradle.kts', -- Gradle - }, - -- Multi-module projects - { 'build.gradle', 'build.gradle.kts' }, - } or vim.fn.getcwd() - ``` - - `single_file_support` : - ```lua - true - ``` - - -## jedi_language_server - -https://github.com/pappasam/jedi-language-server - -`jedi-language-server`, a language server for Python, built on top of jedi - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jedi_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "jedi-language-server" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - vim's starting directory - ``` - - `single_file_support` : - ```lua - true - ``` - - -## jsonls - -https://github.com/hrsh7th/vscode-langservers-extracted - -vscode-json-language-server, a language server for JSON and JSON schema - -`vscode-json-language-server` can be installed via `npm`: -```sh -npm i -g vscode-langservers-extracted -``` - -Neovim does not currently include built-in snippets. `vscode-json-language-server` only provides completions when snippet support is enabled. To enable completion, install a snippet plugin and add the following override to your language client capabilities during setup. - -```lua ---Enable (broadcasting) snippet capability for completion -local capabilities = vim.lsp.protocol.make_client_capabilities() -capabilities.textDocument.completion.completionItem.snippetSupport = true - -require'lspconfig'.jsonls.setup { - capabilities = capabilities, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jsonls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vscode-json-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "json", "jsonc" } - ``` - - `init_options` : - ```lua - { - provideFormatter = true - } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## jsonnet_ls - -https://github.com/grafana/jsonnet-language-server - -A Language Server Protocol (LSP) server for Jsonnet. - -The language server can be installed with `go`: -```sh -go install github.com/grafana/jsonnet-language-server@latest -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.jsonnet_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "jsonnet-language-server" } - ``` - - `filetypes` : - ```lua - { "jsonnet", "libsonnet" } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern("jsonnetfile.json") - ``` - - -## julials - -https://github.com/julia-vscode/julia-vscode - -LanguageServer.jl can be installed with `julia` and `Pkg`: -```sh -julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.add("LanguageServer")' -``` -where `~/.julia/environments/nvim-lspconfig` is the location where -the default configuration expects LanguageServer.jl to be installed. - -To update an existing install, use the following command: -```sh -julia --project=~/.julia/environments/nvim-lspconfig -e 'using Pkg; Pkg.update()' -``` - -Note: In order to have LanguageServer.jl pick up installed packages or dependencies in a -Julia project, you must make sure that the project is instantiated: -```sh -julia --project=/path/to/my/project -e 'using Pkg; Pkg.instantiate()' -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.julials.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "julia", "--startup-file=no", "--history-file=no", "-e", ' # Load LanguageServer.jl: attempt to load from ~/.julia/environments/nvim-lspconfig\n # with the regular load path as a fallback\n ls_install_path = joinpath(\n get(DEPOT_PATH, 1, joinpath(homedir(), ".julia")),\n "environments", "nvim-lspconfig"\n )\n pushfirst!(LOAD_PATH, ls_install_path)\n using LanguageServer\n popfirst!(LOAD_PATH)\n depot_path = get(ENV, "JULIA_DEPOT_PATH", "")\n project_path = let\n dirname(something(\n ## 1. Finds an explicitly set project (JULIA_PROJECT)\n Base.load_path_expand((\n p = get(ENV, "JULIA_PROJECT", nothing);\n p === nothing ? nothing : isempty(p) ? nothing : p\n )),\n ## 2. Look for a Project.toml file in the current working directory,\n ## or parent directories, with $HOME as an upper boundary\n Base.current_project(),\n ## 3. First entry in the load path\n get(Base.load_path(), 1, nothing),\n ## 4. Fallback to default global environment,\n ## this is more or less unreachable\n Base.load_path_expand("@v#.#"),\n ))\n end\n @info "Running language server" VERSION pwd() project_path depot_path\n server = LanguageServer.LanguageServerInstance(stdin, stdout, project_path, depot_path)\n server.runlinter = true\n run(server)\n ' } - ``` - - `filetypes` : - ```lua - { "julia" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## kotlin_language_server - - A kotlin language server which was developed for internal usage and - released afterwards. Maintaining is not done by the original author, - but by fwcd. - - It is built via gradle and developed on github. - Source and additional description: - https://github.com/fwcd/kotlin-language-server - - This server requires vim to be aware of the kotlin-filetype. - You could refer for this capability to: - https://github.com/udalov/kotlin-vim (recommended) - Note that there is no LICENSE specified yet. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.kotlin_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "kotlin-language-server" } - ``` - - `filetypes` : - ```lua - { "kotlin" } - ``` - - `root_dir` : - ```lua - root_pattern("settings.gradle") - ``` - - -## lean3ls - -https://github.com/leanprover/lean-client-js/tree/master/lean-language-server - -Lean installation instructions can be found -[here](https://leanprover-community.github.io/get_started.html#regular-install). - -Once Lean is installed, you can install the Lean 3 language server by running -```sh -npm install -g lean-language-server -``` - -Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim), -that plugin fully handles the setup of the Lean language server, -and you shouldn't set up `lean3ls` both with it and `lspconfig`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.lean3ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lean-language-server", "--stdio", "--", "-M", "4096", "-T", "100000" } - ``` - - `filetypes` : - ```lua - { "lean3" } - ``` - - `offset_encoding` : - ```lua - "utf-32" - ``` - - `root_dir` : - ```lua - root_pattern("leanpkg.toml") or root_pattern(".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## leanls - -https://github.com/leanprover/lean4 - -Lean installation instructions can be found -[here](https://leanprover-community.github.io/get_started.html#regular-install). - -The Lean 4 language server is built-in with a Lean 4 install -(and can be manually run with, e.g., `lean --server`). - -Note: that if you're using [lean.nvim](https://github.com/Julian/lean.nvim), -that plugin fully handles the setup of the Lean language server, -and you shouldn't set up `leanls` both with it and `lspconfig`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.leanls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lake", "serve", "--" } - ``` - - `filetypes` : - ```lua - { "lean" } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `options` : - ```lua - { - no_lake_lsp_cmd = { "lean", "--server" } - } - ``` - - `root_dir` : - ```lua - root_pattern("lakefile.lean", "lean-toolchain", "leanpkg.toml", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## lelwel_ls - -https://github.com/0x2a-42/lelwel - -Language server for lelwel grammars. - -You can install `lelwel-ls` via cargo: -```sh -cargo install --features="lsp" lelwel -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.lelwel_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lelwel-ls" } - ``` - - `filetypes` : - ```lua - { "llw" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## lemminx - -https://github.com/eclipse/lemminx - -The easiest way to install the server is to get a binary at https://download.jboss.org/jbosstools/vscode/stable/lemminx-binary/ and place it in your PATH. - -NOTE to macOS users: Binaries from unidentified developers are blocked by default. If you trust the downloaded binary from jboss.org, run it once, cancel the prompt, then remove the binary from Gatekeeper quarantine with `xattr -d com.apple.quarantine lemminx`. It should now run without being blocked. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.lemminx.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lemminx" } - ``` - - `filetypes` : - ```lua - { "xml", "xsd", "xsl", "xslt", "svg" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `single_file_support` : - ```lua - true - ``` - - -## ltex - -https://github.com/valentjn/ltex-ls - -LTeX Language Server: LSP language server for LanguageTool 🔍✔️ with support for LaTeX 🎓, Markdown 📝, and others - -To install, download the latest [release](https://github.com/valentjn/ltex-ls/releases) and ensure `ltex-ls` is on your path. - -To support org files or R sweave, users can define a custom filetype autocommand (or use a plugin which defines these filetypes): - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.org set filetype=org ]] -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ltex.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ltex-ls" } - ``` - - `filetypes` : - ```lua - { "bib", "gitcommit", "markdown", "org", "plaintex", "rst", "rnoweb", "tex" } - ``` - - `get_language_id` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## metals - -https://scalameta.org/metals/ - -Scala language server with rich IDE features. - -See full instructions in the Metals documentation: - -https://scalameta.org/metals/docs/editors/vim.html#using-an-alternative-lsp-client - -Note: that if you're using [nvim-metals](https://github.com/scalameta/nvim-metals), that plugin fully handles the setup and installation of Metals, and you shouldn't set up Metals both with it and `lspconfig`. - -To install Metals, make sure to have [coursier](https://get-coursier.io/docs/cli-installation) installed, and once you do you can install the latest Metals with `cs install metals`. You can also manually bootstrap Metals with the following command. - -```bash -cs bootstrap \ - --java-opt -Xss4m \ - --java-opt -Xms100m \ - org.scalameta:metals_2.12: \ - -r bintray:scalacenter/releases \ - -r sonatype:snapshots \ - -o /usr/local/bin/metals -f -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.metals.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "metals" } - ``` - - `filetypes` : - ```lua - { "scala" } - ``` - - `init_options` : - ```lua - { - compilerOptions = { - snippetAutoIndent = false - }, - isHttpEnabled = true, - statusBarProvider = "show-message" - } - ``` - - `message_level` : - ```lua - 4 - ``` - - `root_dir` : - ```lua - util.root_pattern("build.sbt", "build.sc", "build.gradle", "pom.xml") - ``` - - -## mint - -https://www.mint-lang.com - -Install Mint using the [instructions](https://www.mint-lang.com/install). -The language server is included since version 0.12.0. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.mint.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "mint", "ls" } - ``` - - `filetypes` : - ```lua - { "mint" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## mm0_ls - -https://github.com/digama0/mm0 - -Language Server for the metamath-zero theorem prover. - -Requires [mm0-rs](https://github.com/digama0/mm0/tree/master/mm0-rs) to be installed -and available on the `PATH`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.mm0_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "mm0-rs", "server" } - ``` - - `filetypes` : - ```lua - { "metamath-zero" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## nickel_ls - -Nickel Language Server - -https://github.com/tweag/nickel - -`nls` can be installed with nix, or cargo, from the Nickel repository. -```sh -git clone https://github.com/tweag/nickel.git -``` - -Nix: -```sh -cd nickel -nix-env -f . -i -``` - -cargo: -```sh -cd nickel/lsp/nls -cargo install --path . -``` - -In order to have lspconfig detect Nickel filetypes (a prequisite for autostarting a server), -install the [Nickel vim plugin](https://github.com/nickel-lang/vim-nickel). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.nickel_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "nls" } - ``` - - `filetypes` : - ```lua - { "ncl", "nickel" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## nimls - -https://github.com/PMunch/nimlsp -`nimlsp` can be installed via the `nimble` package manager: -```sh -nimble install nimlsp -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.nimls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "nimlsp" } - ``` - - `filetypes` : - ```lua - { "nim" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## ocamlls - -https://github.com/ocaml-lsp/ocaml-language-server - -`ocaml-language-server` can be installed via `npm` -```sh -npm install -g ocaml-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ocamlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ocaml-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "ocaml", "reason" } - ``` - - `root_dir` : - ```lua - root_pattern("*.opam", "esy.json", "package.json") - ``` - - -## ocamllsp - -https://github.com/ocaml/ocaml-lsp - -`ocaml-lsp` can be installed as described in [installation guide](https://github.com/ocaml/ocaml-lsp#installation). - -To install the lsp server in a particular opam switch: -```sh -opam pin add ocaml-lsp-server https://github.com/ocaml/ocaml-lsp.git -opam install ocaml-lsp-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ocamllsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ocamllsp" } - ``` - - `filetypes` : - ```lua - { "ocaml", "ocaml.menhir", "ocaml.interface", "ocaml.ocamllex", "reason" } - ``` - - `get_language_id` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern("*.opam", "esy.json", "package.json", ".git") - ``` - - -## ols - - https://github.com/DanielGavin/ols - - `Odin Language Server`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.ols.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "ols" } - ``` - - `filetypes` : - ```lua - { "odin" } - ``` - - `root_dir` : - ```lua - util.root_pattern("ols.json", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## omnisharp - -https://github.com/omnisharp/omnisharp-roslyn -OmniSharp server based on Roslyn workspaces - -`omnisharp-roslyn` can be installed by downloading and extracting a release from [here](https://github.com/OmniSharp/omnisharp-roslyn/releases). -Omnisharp can also be built from source by following the instructions [here](https://github.com/omnisharp/omnisharp-roslyn#downloading-omnisharp). - -Omnisharp requires the [dotnet-sdk](https://dotnet.microsoft.com/download) to be installed. - -**By default, omnisharp-roslyn doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of the unzipped run script or binary. - -```lua -local pid = vim.fn.getpid() --- On linux/darwin if using a release build, otherwise under scripts/OmniSharp(.Core)(.cmd) -local omnisharp_bin = "/path/to/omnisharp-repo/run" --- on Windows --- local omnisharp_bin = "/path/to/omnisharp/OmniSharp.exe" -require'lspconfig'.omnisharp.setup{ - cmd = { omnisharp_bin, "--languageserver" , "--hostPID", tostring(pid) }; - ... -} -``` - -Note, if you download the executable for darwin you will need to strip the quarantine label to run: -```bash -find /path/to/omnisharp-osx | xargs xattr -r -d com.apple.quarantine -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.omnisharp.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "cs", "vb" } - ``` - - `init_options` : - ```lua - {} - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern(".sln") or root_pattern(".csproj") - ``` - - -## opencl_ls - -https://github.com/Galarius/opencl-language-server - -Build instructions can be found [here](https://github.com/Galarius/opencl-language-server/blob/main/_dev/build.md). - -Prebuilt binaries are available for Linux, macOS and Windows [here](https://github.com/Galarius/opencl-language-server/releases). - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.opencl_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "opencl-language-server" } - ``` - - `filetypes` : - ```lua - { "opencl" } - ``` - - `root_dir` : - ```lua - util.root_pattern(".git") - ``` - - -## openscad_ls - -https://github.com/dzhu/openscad-language-server - -A Language Server Protocol server for OpenSCAD - -You can build and install `openscad-language-server` binary with `cargo`: -```sh -cargo install openscad-language-server -``` - -Vim does not have built-in syntax for the `openscad` filetype currently. - -This can be added via an autocmd: - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.scad set filetype=openscad ]] -``` - -or by installing a filetype plugin such as https://github.com/sirtaj/vim-openscad - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.openscad_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "openscad-language-server" } - ``` - - `filetypes` : - ```lua - { "openscad" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## pasls - -https://github.com/genericptr/pascal-language-server - -An LSP server implementation for Pascal variants that are supported by Free Pascal, including Object Pascal. It uses CodeTools from Lazarus as backend. - -First set `cmd` to the Pascal lsp binary. - -Customization options are passed to pasls as environment variables for example in your `.bashrc`: -```bash -export FPCDIR='/usr/lib/fpc/src' # FPC source directory (This is the only required option for the server to work). -export PP='/usr/lib/fpc/3.2.2/ppcx64' # Path to the Free Pascal compiler executable. -export LAZARUSDIR='/usr/lib/lazarus' # Path to the Lazarus sources. -export FPCTARGET='' # Target operating system for cross compiling. -export FPCTARGETCPU='x86_64' # Target CPU for cross compiling. -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pasls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pasls" } - ``` - - `filetypes` : - ```lua - { "pascal" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## perlls - -https://github.com/richterger/Perl-LanguageServer/tree/master/clients/vscode/perl - -`Perl-LanguageServer`, a language server for Perl. - -To use the language server, ensure that you have Perl::LanguageServer installed and perl command is on your path. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.perlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "perl", "-MPerl::LanguageServer", "-e", "Perl::LanguageServer::run", "--", "--port 13603", "--nostdio 0", "--version 2.1.0" } - ``` - - `filetypes` : - ```lua - { "perl" } - ``` - - `root_dir` : - ```lua - vim's starting directory - ``` - - `settings` : - ```lua - { - perl = { - fileFilter = { ".pm", ".pl" }, - ignoreDirs = ".git", - perlCmd = "perl", - perlInc = " " - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## perlnavigator - -https://github.com/bscan/PerlNavigator - -A Perl language server - -**By default, perlnavigator doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -Clone the PerlNavigator repo, install based on the [instructions](https://github.com/bscan/PerlNavigator#installation-for-other-editors), -and point `cmd` to `server.js` inside the `server/out` directory: - -```lua -cmd = {'node', '/server/out/server.js', '--stdio'} -``` - -At minimum, you will need `perl` in your path. If you want to use a non-standard `perl` you will need to set your configuration like so: -```lua -settings = { - perlnavigator = { - perlPath = '/some/odd/location/my-perl' - } -} -``` - -The `contributes.configuration.properties` section of `perlnavigator`'s `package.json` has all available configuration settings. All -settings have a reasonable default, but, at minimum, you may want to point `perlnavigator` at your `perltidy` and `perlcritic` configurations. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.perlnavigator.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - {} - ``` - - `filetypes` : - ```lua - { "perl" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## perlpls - -https://github.com/FractalBoy/perl-language-server -https://metacpan.org/pod/PLS - -`PLS`, another language server for Perl. - -To use the language server, ensure that you have PLS installed and that it is in your path - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.perlpls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pls" } - ``` - - `filetypes` : - ```lua - { "perl" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `settings` : - ```lua - { - perl = { - perlcritic = { - enabled = false - }, - syntax = { - enabled = true - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## phpactor - -https://github.com/phpactor/phpactor - -Installation: https://phpactor.readthedocs.io/en/master/usage/standalone.html#global-installation - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.phpactor.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "phpactor", "language-server" } - ``` - - `filetypes` : - ```lua - { "php" } - ``` - - `root_dir` : - ```lua - root_pattern("composer.json", ".git") - ``` - - -## please - -https://github.com/thought-machine/please - -High-performance extensible build system for reproducible multi-language builds. - -The `plz` binary will automatically install the LSP for you on first run - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.please.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "plz", "tool", "lps" } - ``` - - `filetypes` : - ```lua - { "bzl" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## powershell_es - -https://github.com/PowerShell/PowerShellEditorServices - -Language server for PowerShell. - -To install, download and extract PowerShellEditorServices.zip -from the [releases](https://github.com/PowerShell/PowerShellEditorServices/releases). -To configure the language server, set the property `bundle_path` to the root -of the extracted PowerShellEditorServices.zip. - -The default configuration doesn't set `cmd` unless `bundle_path` is specified. - -```lua -require'lspconfig'.powershell_es.setup{ - bundle_path = 'c:/w/PowerShellEditorServices', -} -``` - -By default the languageserver is started in `pwsh` (PowerShell Core). This can be changed by specifying `shell`. - -```lua -require'lspconfig'.powershell_es.setup{ - bundle_path = 'c:/w/PowerShellEditorServices', - shell = 'powershell.exe', -} -``` - -Note that the execution policy needs to be set to `Unrestricted` for the languageserver run under PowerShell - -If necessary, specific `cmd` can be defined instead of `bundle_path`. -See [PowerShellEditorServices](https://github.com/PowerShell/PowerShellEditorServices#stdio) -to learn more. - -```lua -require'lspconfig'.powershell_es.setup{ - cmd = {'pwsh', '-NoLogo', '-NoProfile', '-Command', "c:/PSES/Start-EditorServices.ps1 ..."} -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.powershell_es.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "ps1" } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - git root or current directory - ``` - - `shell` : - ```lua - "pwsh" - ``` - - `single_file_support` : - ```lua - true - ``` - - -## prismals - -Language Server for the Prisma JavaScript and TypeScript ORM - -`@prisma/language-server` can be installed via npm -```sh -npm install -g @prisma/language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.prismals.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "prisma-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "prisma" } - ``` - - `root_dir` : - ```lua - root_pattern(".git", "package.json") - ``` - - `settings` : - ```lua - { - prisma = { - prismaFmtBinPath = "" - } - } - ``` - - -## prosemd_lsp - -https://github.com/kitten/prosemd-lsp - -An experimental LSP for Markdown. - -Please see the manual installation instructions: https://github.com/kitten/prosemd-lsp#manual-installation - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.prosemd_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "prosemd-lsp", "--stdio" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - - ``` - - `single_file_support` : - ```lua - true - ``` - - -## psalm - -https://github.com/vimeo/psalm - -Can be installed with composer. -```sh -composer global require vimeo/psalm -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.psalm.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "psalm-language-server" } - ``` - - `filetypes` : - ```lua - { "php" } - ``` - - `root_dir` : - ```lua - root_pattern("psalm.xml", "psalm.xml.dist") - ``` - - -## puppet - -LSP server for Puppet. - -Installation: - -- Clone the editor-services repository: - https://github.com/puppetlabs/puppet-editor-services - -- Navigate into that directory and run: `bundle install` - -- Install the 'puppet-lint' gem: `gem install puppet-lint` - -- Add that repository to $PATH. - -- Ensure you can run `puppet-languageserver` from outside the editor-services directory. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.puppet.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "puppet-languageserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "puppet" } - ``` - - `root_dir` : - ```lua - root_pattern("manifests", ".puppet-lint.rc", "hiera.yaml", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## purescriptls - -https://github.com/nwolverson/purescript-language-server -`purescript-language-server` can be installed via `npm` -```sh -npm install -g purescript-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.purescriptls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "purescript-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "purescript" } - ``` - - `root_dir` : - ```lua - root_pattern("spago.dhall, 'psc-package.json', bower.json") - ``` - - -## pylsp - -https://github.com/python-lsp/python-lsp-server - -A Python 3.6+ implementation of the Language Server Protocol. - -The language server can be installed via `pipx install 'python-lsp-server[all]'`. -Further instructions can be found in the [project's README](https://github.com/python-lsp/python-lsp-server). - -Note: This is a community fork of `pyls`. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pylsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pylsp" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## pyre - -https://pyre-check.org/ - -`pyre` a static type checker for Python 3. - -`pyre` offers an extremely limited featureset. It currently only supports diagnostics, -which are triggered on save. - -Do not report issues for missing features in `pyre` to `lspconfig`. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pyre.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "pyre", "persistent" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## pyright - -https://github.com/microsoft/pyright - -`pyright`, a static type checker and language server for python - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.pyright.setup{} -``` -**Commands:** -- PyrightOrganizeImports: Organize Imports - -**Default values:** - - `cmd` : - ```lua - { "pyright-langserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - python = { - analysis = { - autoSearchPaths = true, - diagnosticMode = "workspace", - useLibraryCodeForTypes = true - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## quick_lint_js - -https://quick-lint-js.com/ - -quick-lint-js finds bugs in JavaScript programs. - -See installation [instructions](https://quick-lint-js.com/install/) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.quick_lint_js.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "quick-lint-js", "--lsp-server" } - ``` - - `filetypes` : - ```lua - { "javascript" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## r_language_server - -[languageserver](https://github.com/REditorSupport/languageserver) is an -implementation of the Microsoft's Language Server Protocol for the R -language. - -It is released on CRAN and can be easily installed by - -```R -install.packages("languageserver") -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.r_language_server.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "R", "--slave", "-e", "languageserver::run()" } - ``` - - `filetypes` : - ```lua - { "r", "rmd" } - ``` - - `log_level` : - ```lua - 2 - ``` - - `root_dir` : - ```lua - root_pattern(".git") or os_homedir - ``` - - -## racket_langserver - -[https://github.com/jeapostrophe/racket-langserver](https://github.com/jeapostrophe/racket-langserver) - -The Racket language server. This project seeks to use -[DrRacket](https://github.com/racket/drracket)'s public API to provide -functionality that mimics DrRacket's code tools as closely as possible. - -Install via `raco`: `raco pkg install racket-langserver` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.racket_langserver.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "racket", "--lib", "racket-langserver" } - ``` - - `filetypes` : - ```lua - { "racket", "scheme" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## reason_ls - -Reason language server - -**By default, reason_ls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -You can install reason language server from [reason-language-server](https://github.com/jaredly/reason-language-server) repository. - -```lua -cmd = {''} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.reason_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "reason-language-server" } - ``` - - `filetypes` : - ```lua - { "reason" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## remark_ls - -https://github.com/remarkjs/remark-language-server - -`remark-language-server` can be installed via `npm`: -```sh -npm install -g remark-language-server -``` - -`remark-language-server` uses the same -[configuration files](https://github.com/remarkjs/remark/tree/main/packages/remark-cli#example-config-files-json-yaml-js) -as `remark-cli`. - -This uses a plugin based system. Each plugin needs to be installed locally using `npm` or `yarn`. - -For example, given the following `.remarkrc.json`: - -```json -{ - "presets": [ - "remark-preset-lint-recommended" - ] -} -``` - -`remark-preset-lint-recommended` needs to be installed in the local project: - -```sh -npm install remark-preset-lint-recommended -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.remark_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "remark-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## rescriptls - -https://github.com/rescript-lang/rescript-vscode - -ReScript language server - -**By default, rescriptls doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. -You have to install the language server manually. - -You can use the bundled language server inside the [vim-rescript](https://github.com/rescript-lang/vim-rescript) repo. - -Clone the vim-rescript repo and point `cmd` to `server.js` inside `server/out` directory: - -```lua -cmd = {'node', '/server/out/server.js', '--stdio'} - -``` - -If you have vim-rescript installed you can also use that installation. for example if you're using packer.nvim you can set cmd to something like this: - -```lua -cmd = { - 'node', - '/home/username/.local/share/nvim/site/pack/packer/start/vim-rescript/server/out/server.js', - '--stdio' -} -``` - -Another option is to use vscode extension [release](https://github.com/rescript-lang/rescript-vscode/releases). -Take a look at [here](https://github.com/rescript-lang/rescript-vscode#use-with-other-editors) for instructions. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rescriptls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - {} - ``` - - `filetypes` : - ```lua - { "rescript" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## rls - -https://github.com/rust-lang/rls - -rls, a language server for Rust - -See https://github.com/rust-lang/rls#setup to setup rls itself. -See https://github.com/rust-lang/rls#configuration for rls-specific settings. -All settings listed on the rls configuration section of the readme -must be set under settings.rust as follows: - -```lua -nvim_lsp.rls.setup { - settings = { - rust = { - unstable_features = true, - build_on_save = false, - all_features = true, - }, - }, -} -``` - -If you want to use rls for a particular build, eg nightly, set cmd as follows: - -```lua -cmd = {"rustup", "run", "nightly", "rls"} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "rls" } - ``` - - `filetypes` : - ```lua - { "rust" } - ``` - - `root_dir` : - ```lua - root_pattern("Cargo.toml") - ``` - - -## rnix - -https://github.com/nix-community/rnix-lsp - -A language server for Nix providing basic completion and formatting via nixpkgs-fmt. - -To install manually, run `cargo install rnix-lsp`. If you are using nix, rnix-lsp is in nixpkgs. - -This server accepts configuration via the `settings` key. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rnix.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "rnix-lsp" } - ``` - - `filetypes` : - ```lua - { "nix" } - ``` - - `init_options` : - ```lua - {} - ``` - - `root_dir` : - ```lua - vim's starting directory - ``` - - `settings` : - ```lua - {} - ``` - - -## robotframework_ls - -https://github.com/robocorp/robotframework-lsp - -Language Server Protocol implementation for Robot Framework. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.robotframework_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "robotframework_ls" } - ``` - - `filetypes` : - ```lua - { "robot" } - ``` - - `root_dir` : - ```lua - util.root_pattern('robotidy.toml', 'pyproject.toml')(fname) or util.find_git_ancestor(fname) - ``` - - -## rome - -https://rome.tools - -Language server for the Rome Frontend Toolchain. - -```sh -npm install [-g] rome -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rome.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "rome", "lsp" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "json", "typescript", "typescript.tsx", "typescriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern('package.json', 'node_modules', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## rust_analyzer - -https://github.com/rust-analyzer/rust-analyzer - -rust-analyzer (aka rls 2.0), a language server for Rust - -See [docs](https://github.com/rust-analyzer/rust-analyzer/tree/master/docs/user#settings) for extra settings. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.rust_analyzer.setup{} -``` -**Commands:** -- CargoReload: Reload current cargo workspace - -**Default values:** - - `cmd` : - ```lua - { "rust-analyzer" } - ``` - - `filetypes` : - ```lua - { "rust" } - ``` - - `root_dir` : - ```lua - root_pattern("Cargo.toml", "rust-project.json") - ``` - - `settings` : - ```lua - { - ["rust-analyzer"] = {} - } - ``` - - -## salt_ls - -Language server for Salt configuration files. -https://github.com/dcermak/salt-lsp - -The language server can be installed with `pip`: -```sh -pip install salt-lsp -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.salt_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "salt_lsp_server" } - ``` - - `filetypes` : - ```lua - { "sls" } - ``` - - `root_dir` : - ```lua - root_pattern('.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## scry - -https://github.com/crystal-lang-tools/scry - -Crystal language server. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.scry.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "scry" } - ``` - - `filetypes` : - ```lua - { "crystal" } - ``` - - `root_dir` : - ```lua - root_pattern('shard.yml', '.git') - ``` - - `single_file_support` : - ```lua - true - ``` - - -## serve_d - - https://github.com/Pure-D/serve-d - - `Microsoft language server protocol implementation for D using workspace-d.` - Download a binary from https://github.com/Pure-D/serve-d/releases and put it in your $PATH. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.serve_d.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "serve-d" } - ``` - - `filetypes` : - ```lua - { "d" } - ``` - - `root_dir` : - ```lua - util.root_pattern("dub.json", "dub.sdl", ".git") - ``` - - -## sixtyfps - -https://github.com/sixtyfpsui/sixtyfps -`SixtyFPS`'s language server - -You can build and install `sixtyfps-lsp` binary with `cargo`: -```sh -cargo install sixtyfps-lsp -``` - -Vim does not have built-in syntax for the `sixtyfps` filetype currently. - -This can be added via an autocmd: - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.60 set filetype=sixtyfps ]] -``` - -or by installing a filetype plugin such as https://github.com/RustemB/sixtyfps-vim - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sixtyfps.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sixtyfps-lsp" } - ``` - - `filetypes` : - ```lua - { "sixtyfps" } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## slint_lsp - -https://github.com/slint-ui/slint -`Slint`'s language server - -You can build and install `slint-lsp` binary with `cargo`: -```sh -cargo install slint-lsp -``` - -Vim does not have built-in syntax for the `slint` filetype at this time. - -This can be added via an autocmd: - -```lua -vim.cmd [[ autocmd BufRead,BufNewFile *.slint set filetype=slint ]] -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.slint_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "slint-lsp" } - ``` - - `filetypes` : - ```lua - { "slint" } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## solang - -A language server for Solidity - -See the [documentation](https://solang.readthedocs.io/en/latest/installing.html) for installation instructions. - -The language server only provides the following capabilities: -* Syntax highlighting -* Diagnostics -* Hover - -There is currently no support for completion, goto definition, references, or other functionality. - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solang.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solang", "--language-server", "--target", "ewasm" } - ``` - - `filetypes` : - ```lua - { "solidity" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## solargraph - -https://solargraph.org/ - -solargraph, a language server for Ruby - -You can install solargraph via gem install. - -```sh -gem install --user-install solargraph -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solargraph.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solargraph", "stdio" } - ``` - - `filetypes` : - ```lua - { "ruby" } - ``` - - `init_options` : - ```lua - { - formatting = true - } - ``` - - `root_dir` : - ```lua - root_pattern("Gemfile", ".git") - ``` - - `settings` : - ```lua - { - solargraph = { - diagnostics = true - } - } - ``` - - -## solc - -https://docs.soliditylang.org/en/latest/installing-solidity.html - -solc is the native language server for the Solidity language. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solc.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solc", "--lsp" } - ``` - - `filetypes` : - ```lua - { "solidity" } - ``` - - `root_dir` : - ```lua - root_pattern(".git") - ``` - - -## solidity_ls - -npm install -g solidity-language-server - -solidity-language-server is a language server for the solidity language ported from the vscode solidity extension - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.solidity_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "solidity-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "solidity" } - ``` - - `root_dir` : - ```lua - root_pattern(".git", "package.json") - ``` - - -## sorbet - -https://sorbet.org - -Sorbet is a fast, powerful type checker designed for Ruby. - -You can install Sorbet via gem install. You might also be interested in how to set -Sorbet up for new projects: https://sorbet.org/docs/adopting. - -```sh -gem install sorbet -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sorbet.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "srb", "tc", "--lsp" } - ``` - - `filetypes` : - ```lua - { "ruby" } - ``` - - `root_dir` : - ```lua - root_pattern("Gemfile", ".git") - ``` - - -## sourcekit - -https://github.com/apple/sourcekit-lsp - -Language server for Swift and C/C++/Objective-C. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sourcekit.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sourcekit-lsp" } - ``` - - `filetypes` : - ```lua - { "swift", "c", "cpp", "objective-c", "objective-cpp" } - ``` - - `root_dir` : - ```lua - root_pattern("Package.swift", ".git") - ``` - - -## sourcery - -https://github.com/sourcery-ai/sourcery - -Refactor Python instantly using the power of AI. - -It requires the initializationOptions param to be populated as shown below and will respond with the list of ServerCapabilities that it supports. - -init_options = { - --- The Sourcery token for authenticating the user. - --- This is retrieved from the Sourcery website and must be - --- provided by each user. The extension must provide a - --- configuration option for the user to provide this value. - token = - - --- The extension's name and version as defined by the extension. - extension_version = 'vim.lsp' - - --- The editor's name and version as defined by the editor. - editor_version = 'vim' -} - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sourcery.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sourcery", "lsp" } - ``` - - `filetypes` : - ```lua - { "python" } - ``` - - `init_options` : - ```lua - { - editor_version = "vim", - extension_version = "vim.lsp" - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `single_file_support` : - ```lua - true - ``` - - -## spectral - -https://github.com/luizcorreia/spectral-language-server - `A flexible JSON/YAML linter for creating automated style guides, with baked in support for OpenAPI v2 & v3.` - -`spectral-language-server` can be installed via `npm`: -```sh -npm i -g spectral-language-server -``` -See [vscode-spectral](https://github.com/stoplightio/vscode-spectral#extension-settings) for configuration options. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.spectral.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "spectral-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "yaml", "json", "yml" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - enable = true, - run = "onType", - validateLanguages = { "yaml", "json", "yml" } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## sqlls - -https://github.com/joe-re/sql-language-server - -This LSP can be installed via `npm`. Find further instructions on manual installation of the sql-language-server at [joe-re/sql-language-server](https://github.com/joe-re/sql-language-server). -
- - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sqlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sql-language-server", "up", "--method", "stdio" } - ``` - - `filetypes` : - ```lua - { "sql", "mysql" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## sqls - -https://github.com/lighttiger2505/sqls - -```lua -require'lspconfig'.sqls.setup{ - cmd = {"path/to/command", "-config", "path/to/config.yml"}; - ... -} -``` -Sqls can be installed via `go get github.com/lighttiger2505/sqls`. Instructions for compiling Sqls from the source can be found at [lighttiger2505/sqls](https://github.com/lighttiger2505/sqls). - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sqls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "sqls" } - ``` - - `filetypes` : - ```lua - { "sql", "mysql" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - `single_file_support` : - ```lua - true - ``` - - -## stylelint_lsp - -https://github.com/bmatcuk/stylelint-lsp - -`stylelint-lsp` can be installed via `npm`: - -```sh -npm i -g stylelint-lsp -``` - -Can be configured by passing a `settings.stylelintplus` object to `stylelint_lsp.setup`: - -```lua -require'lspconfig'.stylelint_lsp.setup{ - settings = { - stylelintplus = { - -- see available options in stylelint-lsp documentation - } - } -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.stylelint_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "stylelint-lsp", "--stdio" } - ``` - - `filetypes` : - ```lua - { "css", "less", "scss", "sugarss", "vue", "wxss", "javascript", "javascriptreact", "typescript", "typescriptreact" } - ``` - - `root_dir` : - ```lua - root_pattern('.stylelintrc', 'package.json') - ``` - - `settings` : - ```lua - {} - ``` - - -## sumneko_lua - -https://github.com/sumneko/lua-language-server - -Lua language server. - -`lua-language-server` can be installed by following the instructions [here](https://github.com/sumneko/lua-language-server/wiki/Build-and-Run). The default `cmd` assumes that the `lua-language-server` binary can be found in `$PATH`. - -```lua -local runtime_path = vim.split(package.path, ';') -table.insert(runtime_path, "lua/?.lua") -table.insert(runtime_path, "lua/?/init.lua") - -require'lspconfig'.sumneko_lua.setup { - settings = { - Lua = { - runtime = { - -- Tell the language server which version of Lua you're using (most likely LuaJIT in the case of Neovim) - version = 'LuaJIT', - -- Setup your lua path - path = runtime_path, - }, - diagnostics = { - -- Get the language server to recognize the `vim` global - globals = {'vim'}, - }, - workspace = { - -- Make the server aware of Neovim runtime files - library = vim.api.nvim_get_runtime_file("", true), - }, - -- Do not send telemetry data containing a randomized but unique identifier - telemetry = { - enable = false, - }, - }, - }, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.sumneko_lua.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "lua-language-server" } - ``` - - `filetypes` : - ```lua - { "lua" } - ``` - - `log_level` : - ```lua - 2 - ``` - - `root_dir` : - ```lua - root_pattern(".luarc.json", ".luacheckrc", ".stylua.toml", "selene.toml", ".git") - ``` - - `settings` : - ```lua - { - Lua = { - telemetry = { - enable = false - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## svelte - -https://github.com/sveltejs/language-tools/tree/master/packages/language-server - -`svelte-language-server` can be installed via `npm`: -```sh -npm install -g svelte-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.svelte.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "svelteserver", "--stdio" } - ``` - - `filetypes` : - ```lua - { "svelte" } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", ".git") - ``` - - -## svls - -https://github.com/dalance/svls - -Language server for verilog and SystemVerilog - -`svls` can be installed via `cargo`: - ```sh - cargo install svls - ``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.svls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "svls" } - ``` - - `filetypes` : - ```lua - { "verilog", "systemverilog" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - -## tailwindcss - -https://github.com/tailwindlabs/tailwindcss-intellisense - -Tailwind CSS Language Server can be installed via npm: -```sh -npm install -g @tailwindcss/language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.tailwindcss.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "tailwindcss-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "aspnetcorerazor", "astro", "astro-markdown", "blade", "django-html", "htmldjango", "edge", "eelixir", "ejs", "erb", "eruby", "gohtml", "haml", "handlebars", "hbs", "html", "html-eex", "heex", "jade", "leaf", "liquid", "markdown", "mdx", "mustache", "njk", "nunjucks", "php", "razor", "slim", "twig", "css", "less", "postcss", "sass", "scss", "stylus", "sugarss", "javascript", "javascriptreact", "reason", "rescript", "typescript", "typescriptreact", "vue", "svelte" } - ``` - - `init_options` : - ```lua - { - userLanguages = { - eelixir = "html-eex", - eruby = "erb" - } - } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - root_pattern('tailwind.config.js', 'tailwind.config.ts', 'postcss.config.js', 'postcss.config.ts', 'package.json', 'node_modules', '.git') - ``` - - `settings` : - ```lua - { - tailwindCSS = { - classAttributes = { "class", "className", "classList", "ngClass" }, - lint = { - cssConflict = "warning", - invalidApply = "error", - invalidConfigPath = "error", - invalidScreen = "error", - invalidTailwindDirective = "error", - invalidVariant = "error", - recommendedVariantOrder = "warning" - }, - validate = true - } - } - ``` - - -## taplo - -https://taplo.tamasfe.dev/lsp/ - -Language server for Taplo, a TOML toolkit. - -`taplo-cli` can be installed via `cargo`: -```sh -cargo install --locked taplo-cli -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.taplo.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "taplo", "lsp", "stdio" } - ``` - - `filetypes` : - ```lua - { "toml" } - ``` - - `root_dir` : - ```lua - root_pattern("*.toml", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## teal_ls - -https://github.com/teal-language/teal-language-server - -Install with: -``` -luarocks install --dev teal-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.teal_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "teal-language-server" } - ``` - - `filetypes` : - ```lua - { "teal" } - ``` - - `root_dir` : - ```lua - root_pattern("tlconfig.lua", ".git") - ``` - - -## terraform_lsp - -https://github.com/juliosueiras/terraform-lsp - -Terraform language server -Download a released binary from -https://github.com/juliosueiras/terraform-lsp/releases. - -From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp: - -Both HashiCorp and the maintainer of terraform-lsp expressed interest in -collaborating on a language server and are working towards a _long-term_ -goal of a single stable and feature-complete implementation. - -For the time being both projects continue to exist, giving users the -choice: - -- `terraform-ls` providing - - overall stability (by relying only on public APIs) - - compatibility with any provider and any Terraform >=0.12.0 currently - less features - - due to project being younger and relying on public APIs which may - not offer the same functionality yet - -- `terraform-lsp` providing - - currently more features - - compatibility with a single particular Terraform (0.12.20 at time of writing) - - configs designed for other 0.12 versions may work, but interpretation may be inaccurate - - less stability (due to reliance on Terraform's own internal packages) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.terraform_lsp.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "terraform-lsp" } - ``` - - `filetypes` : - ```lua - { "terraform", "hcl" } - ``` - - `root_dir` : - ```lua - root_pattern(".terraform", ".git") - ``` - - -## terraformls - -https://github.com/hashicorp/terraform-ls - -Terraform language server -Download a released binary from https://github.com/hashicorp/terraform-ls/releases. - -From https://github.com/hashicorp/terraform-ls#terraform-ls-vs-terraform-lsp: - -Both HashiCorp and the maintainer of terraform-lsp expressed interest in -collaborating on a language server and are working towards a _long-term_ -goal of a single stable and feature-complete implementation. - -For the time being both projects continue to exist, giving users the -choice: - -- `terraform-ls` providing - - overall stability (by relying only on public APIs) - - compatibility with any provider and any Terraform >=0.12.0 currently - less features - - due to project being younger and relying on public APIs which may - not offer the same functionality yet - -- `terraform-lsp` providing - - currently more features - - compatibility with a single particular Terraform (0.12.20 at time of writing) - - configs designed for other 0.12 versions may work, but interpretation may be inaccurate - - less stability (due to reliance on Terraform's own internal packages) - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.terraformls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "terraform-ls", "serve" } - ``` - - `filetypes` : - ```lua - { "terraform" } - ``` - - `root_dir` : - ```lua - root_pattern(".terraform", ".git") - ``` - - -## texlab - -https://github.com/latex-lsp/texlab - -A completion engine built from scratch for (La)TeX. - -See https://github.com/latex-lsp/texlab/blob/master/docs/options.md for configuration options. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.texlab.setup{} -``` -**Commands:** -- TexlabBuild: Build the current buffer -- TexlabForward: Forward search from current position - -**Default values:** - - `cmd` : - ```lua - { "texlab" } - ``` - - `filetypes` : - ```lua - { "tex", "bib" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - { - texlab = { - auxDirectory = ".", - bibtexFormatter = "texlab", - build = { - args = { "-pdf", "-interaction=nonstopmode", "-synctex=1", "%f" }, - executable = "latexmk", - forwardSearchAfter = false, - onSave = false - }, - chktex = { - onEdit = false, - onOpenAndSave = false - }, - diagnosticsDelay = 300, - formatterLineLength = 80, - forwardSearch = { - args = {} - }, - latexFormatter = "latexindent", - latexindent = { - modifyLineBreaks = false - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## tflint - -https://github.com/terraform-linters/tflint - -A pluggable Terraform linter that can act as lsp server. -Installation instructions can be found in https://github.com/terraform-linters/tflint#installation. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.tflint.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "tflint", "--langserver" } - ``` - - `filetypes` : - ```lua - { "terraform" } - ``` - - `root_dir` : - ```lua - root_pattern(".terraform", ".git", ".tflint.hcl") - ``` - - -## theme_check - -https://github.com/Shopify/shopify-cli - -`theme-check-language-server` is bundled with `shopify-cli` or it can also be installed via - -https://github.com/Shopify/theme-check#installation - -**NOTE:** -If installed via Homebrew, `cmd` must be set to 'theme-check-liquid-server' - -```lua -require lspconfig.theme_check.setup { - cmd = { 'theme-check-liquid-server' } -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.theme_check.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "theme-check-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "liquid" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - `settings` : - ```lua - {} - ``` - - -## tsserver - -https://github.com/theia-ide/typescript-language-server - -`typescript-language-server` depends on `typescript`. Both packages can be installed via `npm`: -```sh -npm install -g typescript typescript-language-server -``` - -To configure type language server, add a -[`tsconfig.json`](https://www.typescriptlang.org/docs/handbook/tsconfig-json.html) or -[`jsconfig.json`](https://code.visualstudio.com/docs/languages/jsconfig) to the root of your -project. - -Here's an example that disables type checking in JavaScript files. - -```json -{ - "compilerOptions": { - "module": "commonjs", - "target": "es6", - "checkJs": false - }, - "exclude": [ - "node_modules" - ] -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.tsserver.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "typescript-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "javascript", "javascriptreact", "javascript.jsx", "typescript", "typescriptreact", "typescript.tsx" } - ``` - - `init_options` : - ```lua - { - hostInfo = "neovim" - } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", "tsconfig.json", "jsconfig.json", ".git") - ``` - - -## typeprof - -https://github.com/ruby/typeprof - -`typeprof` is the built-in analysis and LSP tool for Ruby 3.1+. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.typeprof.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "typeprof", "--lsp", "--stdio" } - ``` - - `filetypes` : - ```lua - { "ruby", "eruby" } - ``` - - `root_dir` : - ```lua - root_pattern("Gemfile", ".git") - ``` - - -## vala_ls - -https://github.com/Prince781/vala-language-server - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vala_ls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vala-language-server" } - ``` - - `filetypes` : - ```lua - { "vala", "genie" } - ``` - - `root_dir` : - ```lua - root_pattern("meson.build", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - -## vdmj - -https://github.com/nickbattle/vdmj - -The VDMJ language server can be installed by cloning the VDMJ repository and -running `mvn clean install`. - -Various options are provided to configure the language server (see below). In -particular: -- `annotation_paths` is a list of folders and/or jar file paths for annotations -that should be used with the language server; -- any value of `debugger_port` less than zero will disable the debugger; note -that if a non-zero value is used, only one instance of the server can be active -at a time. - -More settings for VDMJ can be changed in a file called `vdmj.properties` under -`root_dir/.vscode`. For a description of the available settings, see -[Section 7 of the VDMJ User Guide](https://raw.githubusercontent.com/nickbattle/vdmj/master/vdmj/documentation/UserGuide.pdf). - -Note: proof obligations and combinatorial testing are not currently supported -by neovim. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vdmj.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - Generated from the options given - ``` - - `filetypes` : - ```lua - { "vdmsl", "vdmpp", "vdmrt" } - ``` - - `options` : - ```lua - { - annotation_paths = {}, - debugger_port = -1, - high_precision = false, - java = "$JAVA_HOME/bin/java", - java_opts = { "-Xmx3000m", "-Xss1m" }, - logfile = "path.join(vim.fn.stdpath 'cache', 'vdm-lsp.log')", - mavenrepo = "$HOME/.m2/repository/com/fujitsu", - version = "The latest version installed in `mavenrepo`" - } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor(fname) or find_vscode_ancestor(fname) - ``` - - -## verible - -https://github.com/chipsalliance/verible - -A linter and formatter for verilog and SystemVerilog files. - -Release binaries can be downloaded from [here](https://github.com/chipsalliance/verible/releases) -and placed in a directory on PATH. - -See https://github.com/chipsalliance/verible/tree/master/verilog/tools/ls/README.md for options. - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.verible.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "verible-verilog-ls" } - ``` - - `filetypes` : - ```lua - { "systemverilog", "verilog" } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## vimls - -https://github.com/iamcco/vim-language-server - -You can install vim-language-server via npm: -```sh -npm install -g vim-language-server -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vimls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vim-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "vim" } - ``` - - `init_options` : - ```lua - { - diagnostic = { - enable = true - }, - indexes = { - count = 3, - gap = 100, - projectRootPatterns = { "runtime", "nvim", ".git", "autoload", "plugin" }, - runtimepath = true - }, - iskeyword = "@,48-57,_,192-255,-#", - runtimepath = "", - suggest = { - fromRuntimepath = true, - fromVimruntime = true - }, - vimruntime = "" - } - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## vls - -https://github.com/vlang/vls - -V language server. - -`v-language-server` can be installed by following the instructions [here](https://github.com/vlang/vls#installation). - -**By default, v-language-server doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your unzipped and compiled v-language-server. - -```lua --- set the path to the vls installation; -local vls_root_path = vim.fn.stdpath('cache')..'/lspconfig/vls' -local vls_binary = vls_root_path.."/cmd/vls/vls" - -require'lspconfig'.vls.setup { - cmd = {vls_binary}, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vls.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "vlang" } - ``` - - `root_dir` : - ```lua - root_pattern("v.mod", ".git") - ``` - - -## volar - -https://github.com/johnsoncodehk/volar/tree/master/packages/vue-language-server - -Volar language server for Vue - -Volar can be installed via npm: - -```sh -npm install -g @volar/vue-language-server -``` - -Volar by default supports Vue 3 projects. Vue 2 projects need [additional configuration](https://github.com/johnsoncodehk/volar/blob/master/extensions/vscode-vue-language-features/README.md?plain=1#L28-L63). - -**Take Over Mode** -Volar can serve as a language server for both Vue and TypeScript via [Take Over Mode](https://github.com/johnsoncodehk/volar/discussions/471). - -To enable Take Over Mode, override the default filetypes in `setup{}` as follows: - -```lua -require'lspconfig'.volar.setup{ - filetypes = {'typescript', 'javascript', 'javascriptreact', 'typescriptreact', 'vue', 'json'} -} -``` - -**Overriding the default TypeScript Server used by Volar** -The default config looks for TS in the local node_modules. The alternatives are: - -- use a global TypeScript Server installation - -```lua -require'lspconfig'.volar.setup{ - init_options = { - typescript = { - serverPath = '/path/to/.npm/lib/node_modules/typescript/lib/tsserverlib.js' - } - } -} -``` - -- use a global TypeScript Server installation if a local server is not found - -```lua -local util = require 'lspconfig.util' - -local function get_typescript_server_path(root_dir) - local project_root = util.find_node_modules_ancestor(root_dir) - - local local_tsserverlib = project_root ~= nil and util.path.join(project_root, 'node_modules', 'typescript', 'lib', 'tsserverlibrary.js') - local global_tsserverlib = '/home/[yourusernamehere]/.npm/lib/node_modules/typescript/lib/tsserverlibrary.js' - - if local_tsserverlib and util.path.exists(local_tsserverlib) then - return local_tsserverlib - else - return global_tsserverlib - end -end - -require'lspconfig'.volar.setup{ - on_new_config = function(new_config, new_root_dir) - new_config.init_options.typescript.serverPath = get_typescript_server_path(new_root_dir) - end, -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.volar.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vue-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "vue" } - ``` - - `init_options` : - ```lua - { - documentFeatures = { - documentColor = false, - documentFormatting = { - defaultPrintWidth = 100 - }, - documentSymbol = true, - foldingRange = true, - linkedEditingRange = true, - selectionRange = true - }, - languageFeatures = { - callHierarchy = true, - codeAction = true, - codeLens = true, - completion = { - defaultAttrNameCase = "kebabCase", - defaultTagNameCase = "both" - }, - definition = true, - diagnostics = true, - documentHighlight = true, - documentLink = true, - hover = true, - implementation = true, - references = true, - rename = true, - renameFileRefactoring = true, - schemaRequestService = true, - semanticTokens = false, - signatureHelp = true, - typeDefinition = true - }, - typescript = { - serverPath = "" - } - } - ``` - - `on_new_config` : - ```lua - see source file - ``` - - `root_dir` : - ```lua - see source file - ``` - - -## vuels - -https://github.com/vuejs/vetur/tree/master/server - -Vue language server(vls) -`vue-language-server` can be installed via `npm`: -```sh -npm install -g vls -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.vuels.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "vls" } - ``` - - `filetypes` : - ```lua - { "vue" } - ``` - - `init_options` : - ```lua - { - config = { - css = {}, - emmet = {}, - html = { - suggest = {} - }, - javascript = { - format = {} - }, - stylusSupremacy = {}, - typescript = { - format = {} - }, - vetur = { - completion = { - autoImport = false, - tagCasing = "kebab", - useScaffoldSnippets = false - }, - format = { - defaultFormatter = { - js = "none", - ts = "none" - }, - defaultFormatterOptions = {}, - scriptInitialIndent = false, - styleInitialIndent = false - }, - useWorkspaceDependencies = false, - validation = { - script = true, - style = true, - template = true - } - } - } - } - ``` - - `root_dir` : - ```lua - root_pattern("package.json", "vue.config.js") - ``` - - -## yamlls - -https://github.com/redhat-developer/yaml-language-server - -`yaml-language-server` can be installed via `yarn`: -```sh -yarn global add yaml-language-server -``` - -To use a schema for validation, there are two options: - -1. Add a modeline to the file. A modeline is a comment of the form: - -``` -# yaml-language-server: $schema= -``` - -where the relative filepath is the path relative to the open yaml file, and the absolute filepath -is the filepath relative to the filesystem root ('/' on unix systems) - -2. Associated a schema url, relative , or absolute (to root of project, not to filesystem root) path to -the a glob pattern relative to the detected project root. Check `:LspInfo` to determine the resolved project -root. - -```lua -require('lspconfig').yamlls.setup { - ... -- other configuration for setup {} - settings = { - yaml = { - ... -- other settings. note this overrides the lspconfig defaults. - schemas = { - ["https://json.schemastore.org/github-workflow.json"] = "/.github/workflows/*" - ["../path/relative/to/file.yml"] = "/.github/workflows/*" - ["/path/from/root/of/project"] = "/.github/workflows/*" - }, - }, - } -} -``` - -Currently, kubernetes is special-cased in yammls, see the following upstream issues: -* [#211](https://github.com/redhat-developer/yaml-language-server/issues/211). -* [#307](https://github.com/redhat-developer/yaml-language-server/issues/307). - -To override a schema to use a specific k8s schema version (for example, to use 1.18): - -```lua -require('lspconfig').yamlls.setup { - ... -- other configuration for setup {} - settings = { - yaml = { - ... -- other settings. note this overrides the lspconfig defaults. - schemas = { - ["https://raw.githubusercontent.com/instrumenta/kubernetes-json-schema/master/v1.18.0-standalone-strict/all.json"] = "/*.k8s.yaml", - ... -- other schemas - }, - }, - } -} -``` - - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.yamlls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "yaml-language-server", "--stdio" } - ``` - - `filetypes` : - ```lua - { "yaml", "yaml.docker-compose" } - ``` - - `root_dir` : - ```lua - util.find_git_ancestor - ``` - - `settings` : - ```lua - { - redhat = { - telemetry = { - enabled = false - } - } - } - ``` - - `single_file_support` : - ```lua - true - ``` - - -## zeta_note - -https://github.com/artempyanykh/zeta-note - -Markdown LSP server for easy note-taking with cross-references and diagnostics. - -Binaries can be downloaded from https://github.com/artempyanykh/zeta-note/releases - -**By default, zeta-note doesn't have a `cmd` set.** This is because nvim-lspconfig does not make assumptions about your path. You must add the following to your init.vim or init.lua to set `cmd` to the absolute path ($HOME and ~ are not expanded) of your zeta-note binary. - -```lua -require'lspconfig'.zeta_note.setup{ - cmd = {'path/to/zeta-note'} -} -``` - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.zeta_note.setup{} -``` - - -**Default values:** - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - root_pattern(".zeta.toml") - ``` - - -## zk - -github.com/mickael-menu/zk - -A plain text note-taking assistant - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.zk.setup{} -``` -**Commands:** -- ZkIndex: Index -- ZkNew: ZkNew - -**Default values:** - - `cmd` : - ```lua - { "zk", "lsp" } - ``` - - `filetypes` : - ```lua - { "markdown" } - ``` - - `root_dir` : - ```lua - root_pattern(".zk") - ``` - - -## zls - -https://github.com/zigtools/zls - -Zig LSP implementation + Zig Language Server - - - -**Snippet to enable the language server:** -```lua -require'lspconfig'.zls.setup{} -``` - - -**Default values:** - - `cmd` : - ```lua - { "zls" } - ``` - - `filetypes` : - ```lua - { "zig", "zir" } - ``` - - `root_dir` : - ```lua - util.root_pattern("zls.json", ".git") - ``` - - `single_file_support` : - ```lua - true - ``` - - - -vim:ft=markdown -- cgit v1.2.3